共查询到20条相似文献，搜索用时 15 毫秒
1.
Dmitriy V. Alexeiev Christoph Gaedicke Nikolay V. Tsukanov Ralf Freitag 《International Journal of Earth Sciences》2006,95(6):977-993
Structural evolution of the Kamchatka–Aleutian junction area in late Mesozoic and Tertiary was generally controlled by (1) the processes of subduction in Kronotskiy and Proto-Kamchatka subduction zones and (2) collision of the Kronotskiy arc against NE Eurasia margin. Two structural zones of the pre-Pliocene age and six structural assemblages are recognized in studied region. 1: Eastern ranges zone comprises SE-vergent thrust folded belt, which evolved in accretionary and collisional setting. Two structural assemblages (ER1 and ER2), developed there, document shortening in the NW–SE direction and in the N–S direction, respectively. 2: Eastern Peninsulas zone generally corresponds to Kronotskiy arc terrane. Four structural assemblages are recognized in this zone. They characterize (1) precollisional deformations in the accretionary wedge (EP1) and in the fore-arc basin and volcanic belt (EP2), and (2) syn-collisional deformation of the entire Kronotskiy terrane in plunging folds (EP3) and deformations in the foreland basin (EP4). Analysis of paleomagnetic declinations versus present day structural strike in the Kronotskiy arc terrane shows that originally the arc was trending from west to east. Relative position of the accretionary wedge, fore-arc basin and volcanic belt, as well as northward dipping thrusts in accretionary wedge indicate, that a northward dipping subduction zone was located south of the arc. The accretionary wedge developed from the Late Cretaceous through the Eocene, and it implies that the subduction zone maintained its direction and position during this time. It implies that Kronotskiy arc was neither a part of the Pacific nor Kula plates and was located on an individual smaller plate, which included the arc and Vetlovka back-arc basin. Motion of the Kronotskiy arc towards Eurasia was connected only with NW-directed subduction at Kamchatka margin since Middle Eocene (42–44 Ma). Emplacement of the Kronotskiy arc at the Kamchatka margin occurred between Late Eocene and Early Miocene. This is based on the age of syn-collisional plunging folds in Kronotskiy terrane, and provenance data for the Upper Eocene to Middle Miocene Tyushevka basin, which indicate in situ evolution of the basin with respect to Kamchatka. Collision was controlled by the common motion of the Kronotskiy arc with Pacific plate towards the northwest, and by the motion of the Eurasian margin towards the south. The latter motion was responsible for the southward deflection of the western part of the Kronotskiy arc (EP3 structures), and for oblique transpressional structures in the collisional belt (ER2 structures). 相似文献
2.
西南极主要由哈格冰原岛峰群、南极半岛、瑟斯顿岛、玛丽·伯德地和埃尔斯沃思-惠特莫尔山脉五个各具特色的地壳块体组成。通过综述上述各块体主要的岩浆事件及其构造意义,旨在了解西南极的地质演化过程。西南极最古老的岩石为哈格冰原岛峰群地块的前寒武纪正片麻岩,时代为1238 Ma,记录了中元古代弧岩浆作用,其余四个地块记录了~500 Ma以来的地质演化过程。古生代时期,埃尔斯沃思-惠特莫尔山脉地块处于快速沉降的陆相断陷盆地环境,岩浆活动稀少,与罗斯造山运动形成的弧后伸展有关;玛丽·伯德地地块中—晚古生代发育一套与板块汇聚有关的岩浆作用,形成于活动大陆边缘环境;而南极半岛-瑟斯顿岛地块记录了石炭纪—二叠纪时期弧的发育。各地块的构造背景从侏罗纪开始明显分化,埃尔斯沃思-惠特莫尔山脉地块记录了侏罗纪板内岩浆作用,可能与大火成岩省有关;玛丽·伯德地地块发育的侏罗纪—早白垩世Ⅰ型弧岩浆岩随时间转变为白垩纪中期的A型碱性岩浆岩,经历了由俯冲向裂解机制的转变;南极半岛-瑟斯顿岛地块侏罗纪—白垩纪为弧岩浆活动活跃期,同时也有大火成岩省火山活动的记录,是持续俯冲和裂解相互作用的产物。新生代岩浆作用以南极半岛地块为代表,弧岩浆作用持续到始新世,其时空分布特征与左行错断扩张脊的分段俯冲和碰撞有关。 相似文献
3.
The Black Sea region comprises Gondwana-derived continental blocks and oceanic subduction complexes accreted to Laurasia. The core of Laurasia is made up of an Archaean–Palaeoproterozoic shield, whereas the Gondwana-derived blocks are characterized by a Neoproterozoic basement. In the early Palaeozoic, a Pontide terrane collided and amalgamated to the core of Laurasia, as part of the Avalonia–Laurasia collision. From the Silurian to Carboniferous, the southern margin of Laurasia was a passive margin. In the late Carboniferous, a magmatic arc, represented by part of the Pontides and the Caucasus, collided with this passive margin with the Carboniferous eclogites marking the zone of collision. This Variscan orogeny was followed by uplift and erosion during the Permian and subsequently by Early Triassic rifting. Northward subduction under Laurussia during the Late Triassic resulted in the accretion of an oceanic plateau, whose remnants are preserved in the Pontides and include Upper Triassic eclogites. The Cimmeride orogeny ended in the Early Jurassic, and in the Middle Jurassic the subduction jumped south of the accreted complexes, and a magmatic arc was established along the southern margin of Laurasia. There is little evidence for subduction during the latest Jurassic–Early Cretaceous in the eastern part of the Black Sea region, which was an area of carbonate sedimentation. In contrast, in the Balkans there was continental collision during this period. Subduction erosion in the Early Cretaceous removed a large crustal slice south of the Jurassic magmatic arc. Subduction in the second half of the Early Cretaceous is evidenced by eclogites and blueschists in the Central Pontides and by a now buried magmatic arc. A continuous extensional arc was established only in the Late Cretaceous, coeval with the opening of the Black Sea as a back-arc basin. 相似文献
4.
侏罗系是柴达木盆地最重要的源储层系之一。通过野外地质、剖面实测、地震解释、显微构造分析等大量系列资料的综合应用与分析,认为研究区自中生代以来,经历了印支期右行逆冲-走滑构造运动、早—中侏罗世伸展运动、早白垩世北西-南东向挤压及新生代南北向挤压运动,它们与早侏罗世至中侏罗世早期(小煤沟组至大煤沟组)在NE向伸展应力场作用下形成的断陷盆地、中侏罗世晚期至晚侏罗世(彩石岭组—洪水沟组)热力沉降坳陷盆地、早白垩世南北向挤压坳陷盆地密切相关。侏罗纪原型盆地发育三类沉积边界,即盆缘不整合边界(缓坡型和陡坡型边界)、盆内正断层边界、后期逆断层改造边界。不同的现存盆地边界类型对原型盆地恢复的作用不同。侏罗纪盆地以东昆仑构造带为界具有"北陆南洋"的古地理格局,柴达木地区的侏罗纪盆地主要发育在沿岸造山带和岛弧带的山前坳陷以及薄弱的柴北缘加里东俯冲碰撞带之上,形成相对分隔的独立盆地群。柴达木早、中、晚侏罗世原型盆地的分布因受到古特提斯洋向北偏东方向的俯冲作用和阿尔金断裂左旋走滑作用的影响,其沉积中心和沉积范围呈现出从早到晚向东北方向逐渐迁移的规律。早侏罗世盆地的沉积沉降中心主要位于柴北缘西部的冷湖—马海一带,中侏罗世盆地的沉积沉降中心主要位于柴北缘中段的大柴旦—怀头他拉一带,而晚侏罗世盆地的沉积沉降中心主要位于德令哈—乌兰一带。 相似文献
5.
陆弧和弧前盆地是俯冲体系中具有密切联系的构造单元。中生代以来,华南受多期板块俯冲的控制,发育大规模岩浆岩带及海域广泛分布的弧前盆地。但陆域弧岩浆岩较少,海域又缺乏足够钻井,各时期陆弧的位置存在较大争议,同时,南海北部至东海一带弧前盆地也缺乏系统认识,因此,亟须新的研究思路深化对华南晚中生代俯冲体系和俯冲过程的认识。本文以前人研究为基础,对海域钻遇中生界的典型钻井进行了详细分析,系统开展了海域盆地区域构造和沉积对比,将弧前盆地发育与岛弧变迁相结合综合分析。结果表明早侏罗世—早白垩世陆弧位于南海北部—东海靠近陆域一侧,经历了早侏罗世局限陆弧、中晚侏罗世沿海陆弧带、早白垩世向海沟方向的迁移。在此过程中,华南海域弧前盆地群于中侏罗世正式形成,早白垩世发育盆缘角度不整合,粗碎屑相带向海沟方向迁移,晚白垩南海北部与东海各自进入新的构造体制,结束弧前盆地的发育。华南沿海海域中生代盆地的发育可为陆弧的展布提供重要约束,弧岩浆岩带的迁移控制了弧前盆地的演化。 相似文献
6.
目前对珠江口盆地中生代以来的演化过程及其与沉积环境演变的响应关系尚缺乏系统性认识.基于珠江口盆地中-新生代岩浆活动、断陷结构样式及其改造、典型构造变形样式、沉积中心的转换等特征的对比分析,将盆地中-新生代的构造演化划分为4个阶段、7个期次：（1）中侏罗世-晚白垩世早期（～170～90 Ma）为古太平洋板块俯冲主控的陆缘岩浆弧-弧前盆地演化阶段;（2）晚白垩世-始新世中期（～90～43 Ma）为太平洋板块俯冲后撤背景下弧后周缘前陆/造山后塌陷-主动裂谷演化阶段;（3）始新世中期-中中新世（～43～10 Ma）为华南挤出-古南海俯冲拖曳主导的被动陆缘演化阶段;（4）晚中新世以来（～10～0 Ma）为菲律宾板块NWW向仰冲主导的挤压张扭演化阶段.～90 Ma、～43 Ma、～10 Ma分别实现了由安第斯型俯冲向西太平洋型俯冲、由主动裂谷向被动陆缘伸展、由被动陆缘伸展向挤压张扭的转换.在此过程中,伴随着古南海和南海的发育-消亡,新生代裂陷期沉积环境由东向西、由南向北逐渐海侵,裂后期由南向北阶段性差异沉降,由陆架浅水向陆坡深水转换,这使得珠一/三、珠二、珠四坳陷的石油地质条件具有显著的分带差异性... 相似文献
7.
Mesozoic rocks of the Baja California Peninsula form one of the most areally extensive, best-exposed, longest-lived (160 my), least-tectonized and least-metamorphosed convergent-margin basin complexes in the world. This convergent margin shows an evolutionary trend that may be typical of arc systems facing large ocean basins: a progression from highly extensional (phase 1) through mildly extensional (phase 2) to compressional (phase 3) strain regimes. This trend is largely due to the progressively decreasing age of lithosphere that is subducted, which causes a gradual decrease in slab dip angle (and concomitant increase in coupling between lower and upper plates), as well as progressive inboard migration of the arc axis.This paper emphasizes the usefulness of sedimentary and volcanic basin analysis for reconstructing the tectonic evolution of a convergent continental margin. Phase 1 consists of Late Triassic to Late Jurassic oceanic intra-arc to backarc basins that were isolated from continental sediment sources. New, progressively widening basins were created by arc rifting and sea floor spreading, and these were largely filled with progradational backarc arc-apron deposits that record the growth of adjacent volcanoes up to and above sea level. Inboard migration of the backarc spreading center ultimately results in renewed arc rifting, producing an influx of silicic pyroclastics to the backarc basin. Rifting succeeds in conversion of the active backarc basin into a remnant backarc basin, which is blanketed by epiclastic sands.Phase 1 oceanic arc–backarc terranes were amalgamated by Late Jurassic sinistral strike slip faults. They form the forearc substrate for phase 2, indicating inboard migration of the arc axis due to decrease in slab dip. Phase 2 consists of Early Cretaceous extensional fringing arc basins adjacent to a continent. Phase 2 forearc basins consist of grabens that stepped downward toward the trench, filled with coarse-grained slope apron deposits. Phase 2 intra-arc basins show a cycle of (1) arc extension, characterized by intermediate to silicic explosive and effusive volcanism, culminating in caldera-forming silicic ignimbrite eruptions, followed by (2) arc rifting, characterized by widespread dike swarms and extensive mafic lavas and hyaloclastites. This extensional-rifting cycle was followed by mid-Cretaceous backarc basin closure and thrusting of the fringing arc beneath the edge of the continent, caused by a decrease in slab dip as well as a possible increase in convergence rate.Phase 2 fringing arc terranes form the substrate for phase 3, which consists of a Late Cretaceous high-standing, compressional continental arc that migrated inboard with time. Strongly coupled subduction resulted in accretion of blueschist metamorphic rocks, with development of a broad residual forearc basin behind the growing accretionary wedge, and development of extensional forearc (trench–slope) basins atop the gravitationally collapsing accretionary wedge. Inboard of this, ongoing phase 3 strongly coupled subduction, together with oblique convergence, resulted in development of forearc strike-slip basins upon arc basement.The modern Earth is strongly biased toward long-lived arc–trench systems, which are compressional; therefore, evolutionary models for convergent margins must be constructed from well-preserved ancient examples like Baja California. This convergent margin is typical of many others, where the early to middle stages of convergence (phases 1 and 2) create nonsubductable arc–ophiolite terranes (and their basin fills) in the upper plate. These become accreted to the continental margin in the late stage of convergence (phase 3), resulting in significant continental growth. 相似文献
8.
The Western Black Sea basin opened during Cretaceous times by back-arc rifting in association with a north dipping subduction at the rear of the Cretaceous–Early Tertiary Pontide volcanic arc. The sedimentary wedge developed on the shelf of the Romanian Black Sea sector reflects a complex interplay between large scale rifting, uplift of the orogenic flanks, large-scale post-rift subsidence and sea level changes. We examine the detailed structural configuration of this sector for a regional correlation with the adjacent offshore in Ukraine and Bulgaria. The evolution of the western Black Sea basin started in the Albian–Cenomanian times, when two extensional phases with significantly different directions (N–S and subsequently E–W) lead to the formation of a complex interplay between isolated blocks organised in horsts and grabens generally deepening eastwards. Superposition of normal faults footwall blocks from the two extensional episodes generated a deeply subsided area with enhanced accommodation space, i.e., the Histria Depression, and, consequently, recorded a larger thickness of Paleogene sediments in the post-rift stage. (Re)activation of faults and associated folding reflects repeated inversion during the Late Cretaceous–Oligocene times, associated with subsequent periods of non-deposition and/or erosion during moments of basin fill exposure. These periods of inversion recorded in the Black Sea are controlled by coeval orogenic deformations taking place in the Balkans, Pontides and the Crimean thrust belt. Sea level fluctuations during the Neogene and late Alpine tectonics in the neighbouring orogens caused massive sedimentation followed by sediment starvation and/or significant erosion. Large thicknesses of sediments accumulated during the Pontian, presumably associated with an extensional episode deepening the distal parts of the basin and with differential compaction structures. The interpretation of a high-quality seismic dataset combined with published data allowed the correlation of major structural units and lineaments defined onshore towards the Carpathians with the ones deeply buried below the western Black Sea basin sediments. Unit correlations are furthermore used to derive an integrated tectonic image of the western Black Sea area. 相似文献
9.
《Gondwana Research》2014,25(3-4):1237-1266
The Cimmerian orogen resulted from the collision and accretion of several Perigondwanan blocks to the southern margin of Eurasia between the Late Triassic and Early Jurassic, following the closure of the Palaeotethys ocean. Remnants of this orogen discontinuously crop out in N (Alborz range) and NE Iran (Mashhad–Fariman area) below the syn- to post-collisional clastic successions of the Shemshak Group (Upper Triassic–Middle Jurassic) and the Kashaf Rud Formation (Bajocian). In NE Iran rock associations exposed in the Binalood Mountains, Fariman and Darreh Anjir areas include mafic–ultramafic intrusive rocks, basalts, silicoclastic turbidites and minor limestones, which have been interpreted in the past as ophiolitic remnants of the Palaeotethys ocean. Original stratigraphic, structural, geochemical and geochronological data, described in this paper, suggest a different interpretation. The volcano-sedimentary units of Fariman and Darreh Anjir complexes where deposited during Permian in a subsiding basin were siliciclastic turbidites, derived from the erosion of a magmatic arc and its basement, interfinger with carbonates and basaltic lava flows with both transitional and calc-alkaline affinity. The coexistence of magmatic rocks with different geochemical signature and the sedimentary evolution of the basin can be related to a supra-subduction setting, possibly represented by a fault-controlled intra-arc basin. The Fariman and the Darreh Anjir complexes are thus interpreted as remnants of a magmatic arc and related basins developed at the southern Eurasia margin, on top of the north-directed Palaeotethys subduction zone long before the collision of Iran with Eurasia. They were later involved in the Cimmerian collision during the Triassic. New radiometric ages obtained on I-type post-collisional granitoids postdating the collision-related deformational structures suggest that the suture zone closed before mid-Norian times. Deformation propagated later northward into the Turan domain involving the Triassic successions of the Aghdarband region. 相似文献
10.
Alastair Robertson Osman Parlak Timur Ustaömer Kemal Taslı Nurdan İnan Paulian Dumitrica 《Geodinamica Acta》2013,26(3-4):230-293
This paper presents several types of new information including U–Pb radiometric dating of ophiolitic rocks and an intrusive granite, micropalaeontological dating of siliceous and calcareous sedimentary rocks, together with sedimentological, petrographic and structural data. The new information is synthesised with existing results from the study area and adjacent regions (Central Pontides and Lesser Caucasus) to produce a new tectonic model for the Mesozoic–Cenozoic tectonic development of this key Tethyan suture zone.The Tethyan suture zone in NE Turkey (Ankara–Erzincan–Kars suture zone) exemplifies stages in the subduction, suturing and post-collisional deformation of a Mesozoic ocean basin that existed between the Eurasian (Pontide) and Gondwanan (Tauride) continents. Ophiolitic rocks, both as intact and as dismembered sequences, together with an intrusive granite (tonalite), formed during the Early Jurassic in a supra-subduction zone (SSZ) setting within the ?zmir–Ankara–Erzincan ocean. Basalts also occur as blocks and dismembered thrust sheets within Cretaceous accretionary melange. During the Early Jurassic, these basalts erupted in both a SSZ-type setting and in an intra-plate (seamount-type) setting. The volcanic-sedimentary melange accreted in an open-ocean setting in response to Cretaceous northward subduction beneath a backstop made up of Early Jurassic forearc ophiolitic crust. The Early Jurassic SSZ basalts in the melange were later detached from the overriding Early Jurassic ophiolitic crust.Sedimentary melange (debris-flow deposits) locally includes ophiolitic extrusive rocks of boninitic composition that were metamorphosed under high-pressure low-temperature conditions. Slices of mainly Cretaceous clastic sedimentary rocks within the suture zone are interpreted as a deformed forearc basin that bordered the Eurasian active margin. The basin received a copious supply of sediments derived from Late Cretaceous arc volcanism together with input of ophiolitic detritus from accreted oceanic crust.Accretionary melange was emplaced southwards onto the leading edge of the Tauride continent (Munzur Massif) during latest Cretaceous time. Accretionary melange was also emplaced northwards over the collapsed southern edge of the Eurasian continental margin (continental backstop) during the latest Cretaceous. Sedimentation persisted into the Early Eocene in more northerly areas of the Eurasian margin.Collision of the Tauride and Eurasian continents took place progressively during latest Late Palaeocene–Early Eocene. The Jurassic SSZ ophiolites and the Cretaceous accretionary melange finally docked with the Eurasian margin. Coarse clastic sediments were shed from the uplifted Eurasian margin and infilled a narrow peripheral basin. Gravity flows accumulated in thrust-top piggyback basins above accretionary melange and dismembered ophiolites and also in a post-collisional peripheral basin above Eurasian crust. Thickening of the accretionary wedge triggered large-scale out-of-sequence thrusting and re-thrusting of continental margin and ophiolitic units. Collision culminated in detachment and northward thrusting on a regional scale.Collisional deformation of the suture zone ended prior to the Mid-Eocene (~45?Ma) when the Eurasian margin was transgressed by non-marine and/or shallow-marine sediments. The foreland became volcanically active and subsided strongly during Mid-Eocene, possibly related to post-collisional slab rollback and/or delamination. The present structure and morphology of the suture zone was strongly influenced by several phases of mostly S-directed suture zone tightening (Late Eocene; pre-Pliocene), possible slab break-off and right-lateral strike-slip along the North Anatolian Transform Fault.In the wider regional context, a double subduction zone model is preferred, in which northward subduction was active during the Jurassic and Cretaceous, both within the Tethyan ocean and bordering the Eurasian continental margin. 相似文献
11.
印度-欧亚侧向碰撞带构造-岩浆演化的动力学背景与过程——以藏东三江地区构造演化为例 总被引：23，自引：22，他引：23
对于印度与欧亚板块的侧向碰撞带,即藏东三江地区的新生代构造分析揭示出三种不同性质的构造样式,它们形成于不同的地质时期,发育于不同的地壳层次：（1）区域规模至露头尺度上发育的具有薄皮属性的逆冲断层与推覆构造,它们广泛分布于三江地区,尤其是兰坪-思茅盆地内;（2）以红河-哀牢山断裂、澜沧江和怒江-高黎贡山断裂等为代表的区域高温型走滑韧性剪切带构造和局部发育的脆性走滑断裂构造,后者在中新生代盆地内部断裂更为发育;（3）遍布全区发育的变质核杂岩构造与地堑-半地堑盆地.区域岩浆活动性与区域构造事件的发生具有密切的时空联系.区域性递进收缩事件与走滑事件发生于碰撞过程的早期阶段,并随后伴随着早期具有岩石圈板块俯冲性质的碰撞弧高钾岩浆活动,而后期的递进伸展事件诱发了板内伸展环境中的晚期高钾岩浆活动.二者之间的碱性岩浆活动间歇期,对应着区域构造体制的转变与区域伸展作用的发生,变质核杂岩的发育与微弱的钙碱性岩浆活动是其最直接的表现.区域古地磁资料分析表明,印度-欧亚板块之间的板块相互作用、区域板块与地块的旋转以及由此所致的不同构造环境制约着各种地质事件的发生与发展.北向运动的印度板块的旋转致使三江地块在新生代演化中发生了两次规模与特点不一的地块旋转过程,即早期的大角度快速旋转和晚期的小角度慢速旋转事件.它们分别对应于早期的递进收缩变形、走滑事件和具有碰撞弧属性的碱性岩浆活动与中期的区域伸展、变质核杂岩的发育与微弱的钙碱性岩浆活动性,以及后期的递进伸展作用和晚期陆内碱性岩浆活动性. 相似文献
12.
义敦岛弧是喜马拉雅巨型造山带中的一个复合造山带,它经历了印支期洋壳俯冲造山、燕山湖弧-陆碰撞和喜马拉雅期陆内走滑作用诸演化历史。可能由于洋壳板片俯冲角度不同,义敦晚三叠世古岛弧带(206～237 Ma)南北两段具有不同的发育历史,北段昌台弧以发育孤间裂谷为特色,具张性弧特征,发育扩张环境流体聚敛成矿系统,形成VMS型Zn-Pb-Cu矿床和浅成低温热液型Ag-Au-Hg矿床;南段中甸弧不发育弧后盆地,但广泛发育钙碱性弧火山岩-玢岩-斑岩杂岩系和挤压环境岩浆-流体成矿系统,形成斑岩型-夕卡岩型铜多金属矿床。在三叠纪-侏罗纪之交的弧-陆碰撞作用中,早期大陆板片俯冲形成同碰撞花岗岩带(约200 Ma),晚期造山后伸展作用,形成A型花岗岩带(75～138 Ma),伴随扬子大陆板片俯冲而发生的强烈剪切和推覆,在甘孜-理塘蛇绿混杂带发育挤压剪切环境流体聚敛成矿系统,形成剪切带型金矿。伴随造山后伸展和A型花岗岩侵位,发育伸张环境岩浆-流体聚敛成矿系统,主要形成夕卡岩型锡矿和构造破碎带热浪脉型银多金属矿床。印度-亚洲大陆碰撞在义敦造山带主要表现为陆内走滑作用,并控制碱性花岗岩和花岗斑岩的发育(50～30 Ma),伴随斑岩型金矿的形成。 相似文献
13.
This paper deals with the segmentation and inversion of the Hangjinqi fault zone (HFZ), which is the dominant structure in the northern part of the Ordos basin in North China. HFZ was reactivated during the Late Triassic and obliquely inverted during the Middle Jurassic shortening. Subsurface geological mapping and structural analysis were carried out to determine the segmentation and kinematic history of the deformation. The HFZ was a left-stepping fault zone and was made up of three segments: the Porjianghaizi fault (PF), Wulanjilinmiao fault (WF) and Sanyanjing fault (SF), which are separated by two relay ramps. Two distinct phases can be identified in its structural evolution: (1) during the Late Triassic compressional deformation, the HFZ was characterized by shortening and thrusting to the north; and (2) During the Middle Jurassic phase the HFZ was oblique to the extensional fault trends, the reverse faults were reactivated as dextral strike-slip faults as a result of transtensional inversion. The inversion ratio of the HFZ indicates an increase in deformational degree from east to west over the whole region. The first deformation stage resulted from the N–S compression between the South China and North China plates during the Late Triassic. The second deformation stage of compression was related to the west-northwestward subduction of the paleo-Pacific plate during the Middle Jurassic. In the Jurassic deformation framework, the HFZ may be interpreted as an accommodation structure parallel to the Yanshan–Yinshan orogenic belt developed in the northern Ordos area. 相似文献
14.
笔者依据班公湖地区1：25万喀纳幅、日土县幅、羌多幅地质填图和专题研究工作取得的阶段性成果,将班公湖带的多岛弧盆系时空结构厘定为3条蛇绿混杂岩亚带。该3条亚带为盆地所隔,从北而南依次为班公湖带北亚带、班摩掌侏罗纪弧间盆地、班公湖带中亚带、日土-巴尔穷侏罗纪—早白垩世复合弧后盆地和班公湖带南亚带等。初步认为班公湖-怒江特提斯洋经历了晚三叠—早侏罗世往北俯冲、中晚侏罗世早期向北、往南双向俯冲、早白垩世往南俯冲等3次俯冲消亡阶段;同时,讨论了在班公湖带研究中存在的问题及其在反演班公湖-怒江结合带西段构造演化和在找矿方面的意义,以及进一步研究方向。 相似文献
15.
K. Wakita 《Journal of Asian Earth Sciences》2000,18(6)
The geology of Cretaceous accretionary–collision complexes in central Indonesia is reviewed in this paper. The author and his colleagues have investigated the Cretaceous accretionary–collision complexes by means of radiolarian biostratigraphy and metamorphic petrology, as well as by geological mapping. The results of their work has revealed aspects of the tectonic development of the Sundaland margin in Cretaceous time. The Cretaceous accretionary–collision complexes are composed of various tectonic units formed by accretionary or collision processes, forearc sedimentation, arc volcanism and back arc spreading. The tectonic units consist of chert, limestone, basalt, siliceous shale, sandstone, shale, volcanic breccia, conglomerate, high P/T and ultra high P metamorphic rocks and ultramafic rocks (dismembered ophiolite). All these components were accreted along the Cretaceous convergent margin of the Sundaland Craton. In the Cretaceous, the southeastern margin of Sundaland was surrounded by a marginal sea. An immature volcanic arc was developed peripherally to this marginal sea. An oceanic plate was being subducted beneath the volcanic arc from the south. The oceanic plate carried microcontinents which were detached fragments of Gondwanaland. Oceanic plate subduction caused arc volcanism and formed an accretionary wedge. The accretionary wedge included fragments of oceanic crust such as chert, siliceous shale, limestone and pillow basalt. A Jurassic shallow marine allochthonous formation was emplaced by the collision of continental blocks. This collision also exhumed very high and ultra-high pressure metamorphic rocks from the deeper part of the pre-existing accretionary wedge. Cretaceous tectonic units were rearranged by thrusting and lateral faulting in the Cenozoic era when successive collision of continental blocks and rotation of continental blocks occurred in the Indonesian region. 相似文献
16.
班公湖—怒江构造带西段三叠纪—侏罗纪构造—沉积演化 总被引：20，自引：2，他引：20
班公湖－怒江构造带西段在大地构造位置上处于特提斯构造域东端，横跨班公湖－怒江断裂带。三叠纪－株罗纪期间，其构造－沉积演化经历了大陆初始裂谷（T）、原洋裂谷（J1）、残余弧后盆地（J2－J3）阶段。初始裂谷阶段的拉张是呈南断北超的半地堑式由东向西进行的，逐渐形成地堑式原洋裂谷盆地。中晚侏罗世，南部新特提斯洋壳开始北各俯冲,产生的区域挤压应力使原洋裂谷逐渐封闭，裂谷盆地的小洋壳表现出以南向俯冲为主的双向式腑冲，同时伴生区域热沉降，盆地具残余弧后盆地的性质。该阶段,羌南地区发育碳酸盐岩为主的稳定陆缘沉积，冈度斯－念青唐古拉板片北部则形成广泛南超的近源碎屑沉积。 相似文献
17.
Wu-Cheng Chi Donald L. Reed Greg Moore Tuan Nguyen Char-Shine Liu Neil Lundberg 《Tectonophysics》2003,374(3-4):199-217
The structural geometry, kinematics and density structure along the rear of the offshore Taiwan accretionary prism were studied using seismic reflection profiling and gravity modeling. Deformation between the offshore prism and forearc basin at the point of incipient collision, and southward into the region of subduction, has been interpreted as a tectonic wedge, similar to those observed along the front of mountain ranges. This tectonic wedge is bounded by an east-dipping roof thrust and a blind, west-dipping floor thrust. An east-dipping sequence of forearc-basin strata in the hanging wall of the roof thrust reaches a thickness in excess of 4 km near the tip of the interpreted tectonic wedge. Section restoration of the roof sequence yields an estimate of 4 km of shortening, which is small compared with that inferred in the collision area to the north, based on the variation in distance between the apex of the prism and the island arc.Previous studies propose that either high-angle normal faulting or backfolding has exhumed the metamorphic rocks along the eastern flank of the Central Range in the collision zone on land. To better constrain the initial crustal configuration, we tested 350 crustal models to fit the free-air gravity anomaly data in the offshore region to study the density structure along the rear of the accretionary prism in the subduction and initial collision zones before the structures become more complex in the collision zone on land. The gravity anomaly, observed in the region of subduction (20.2°N), can be modeled with the arc basement forming a trenchward-dipping backstop that is overlain by materials with densities in the range of sedimentary rocks. Near the point of incipient collision (20.9°N), however, the free-air gravity anomaly over the rear of the prism is approximately 40 mgal higher, compared with the region of subduction, and requires a significant component of high density crustal rocks within the tectonic wedge. These results suggest that the forearc basement may be deformed along the rear of the prism, associated with the onset of collision, but not in the subduction region further to the south. 相似文献
18.
A traverse through the western Kunlun (Xinjiang,China): tentative geodynamic implications for the Paleozoic and Mesozoic 总被引：13，自引：0，他引：13
The northern part of the western Kunlun (southern margin of the Tarim basin) represents a Sinian rifted margin. To the south of this margin, the Sinian to Paleozoic Proto-Tethys Ocean formed. South-directed subduction of this ocean, beneath the continental southern Kunlun block during the Paleozoic, resulted in the collision between the northern and southern Kunlun blocks during the Devonian. The northern part of the Paleo-Tethys Ocean, located to the south of the southern Kunlun, was subducted to the north beneath the southern Kunlun during the Late Paleozoic to Early Mesozoic. This caused the formation of a subduction-accretion complex, including a sizeable accretionary wedge to the south of the southern Kunlun. A microcontinent (or oceanic plateau?), which we refer to as “Uygur terrane,” collided with the subduction complex during the Late Triassic. Both elements together represent the Kara-Kunlun. Final closure of the Paleo-Tethys Ocean took place during the Early Jurassic when the next southerly located continental block collided with the Kara-Kunlun area. From at least the Late Paleozoic to the Early Jurassic, the Tarim basin must be considered a back-arc region. The Kengxiwar lineament, which “connects” the Karakorum fault in the west and the Ruogiang-Xingxingxia/Altyn-Tagh fault zone in the east, shows signs of a polyphase strike-slip fault along which dextral and sinistral shearing occurred. 相似文献
19.
北淮阳盆岭构造带是大别造山带的重要组成部分。佛子岭岩群代表了早古生代扬子地块北缘大别古岛弧弧前海盆的火山沉积建造,在加里东运动陆块对接过程中变形变质。石炭系梅山群具磨拉石建造特征。在华力西印支期陆内俯冲褶皱带的基础上,燕山期沿桐柏桐城断裂伸展北移,近东西向断陷盆地发育,形成盆岭构造景观。南侧大别山强烈隆升,铸就了现今大别山变质核杂岩构造格局。中生代岩浆活动是区内重要铀源,具有成矿潜力的地质体是响洪甸正长岩体和北带粗面质火山碎屑岩 相似文献
20.
K. Birkenmajer 《International Journal of Earth Sciences》1994,83(2):309-321
The sector of the northern Antarctic Peninsula between the Tula and Shackleton Fracture Zones provides evidence for the subduction of south-east Pacific oceanic crust under Antarctic continental crust during Late Mesozoic through Miocene times. The pre-subduction depositional history of this sector includes the formation of a marine siliciclastic turbidite wedge (?Permian-Triassic) deposited in a marginal basin setting. It was folded and thrust retroarc before the Middle Jurassic to form the Trinity accretion foldbelt, which extended for several hundred kilometres along the Pacific margin of Gondwanaland. The foldbelt was deeply eroded and levelled under subaerial conditions, then unconformably covered either by Middle-Upper Jurassic alluvial to lacustrine deposits (in the north) or by Early Cretaceous basic lavas (in the south). The subduction-related magmatism, in the form of acidic effusions and intrusions, began in the northern Antarctic Peninsula during Middle Jurassic times and continued as predominantly basic lavas and agglomerates intruded by basic, intermediate and acidic plutons, and by a succession of dykes, during the Early to Late Cretaceous. Thus the inner magmatic are of the northern Antarctic Peninsula (northern Graham Land-Trinity Peninsula) was formed. An outward (north-westerly) migration of centres of magmatic activity with time (Cretaceous-Tertiary) towards the subduction trench, coupled with a northeastward shift of these centres along the Arc's length due to the counterclockwise rotation of Antarctica, produced the outer magmatic arc of the South Shetland Islands. Slight folding of Late Mesozoic and Tertiary magmatic suites occurred at several stages of subduction. Stronger folding and retroarc thrusting appeared locally as a result of the collision of the Aluk Ridge-Antarctic Peninsula during the Mid-Miocene. The latest plate tectonic event was the opening of the Bransfield Rift (Oligocene-Recent) as a spreading back-arc basin, associated with terrestrial and submarine volcanic activity. 相似文献