首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
A. Gerdes 《地学学报》2001,13(4):305-312
Recent studies have shown that melts and residues may not equilibrate during anatexis, and uncertainty exists about the scale on which magmas can be homogenized. This study of elemental and isotopic homogeneity of the South Bohemian Weinsberg granites (˜ 5000 km2) identifies three voluminous, relatively homogeneous magma batches. Each batch has different 87Sr/86Srinit (0.7080, 0.7093 and 0.7106), but all equilibrated at ˜ 327–329 Ma, very similar to the time of monazite crystallization. The data cannot entirely prove melt/residue equilibration during anatexis. However, elemental and isotopic compositions imply magma generation by partial melting of heterogeneous South Bohemian crust and chemical differentiation subsequent to Sr-isotope equilibration. Assuming relatively rapid ascent and solidification rates, magma homogenization must have occurred mostly just after partial melting, during melt segregation and accumulation in the deeper crust with slow prograde heating. Models of rapid crustal heating and instantaneous melt extraction are incompatible with the data.  相似文献   

2.
New 40Ar/39Ar ages are presented from the giant Sulu ultrahigh-pressure (UHP) terrane and surrounding areas. Combined with U-Pb ages, Sm-Nd ages, Rb-Sr ages, inclusion relationships, and geological relationships, they help define the orogenic events before, during and after the Triassic collision between the Sino–Korean and Yangtze Cratons. In the Qinling microcontinent, tectonism occurred between 2.0 and 1.4 Ga. The UHP metamorphism occurred in the Yangtze Craton between 240 and 222 Ma; its thermal effect on the Qinling microcontinent was limited to partial resetting of K-feldspar 40Ar/39Ar ages. Subsequent unroofing at rates of 5–25 km Myr−1 brought the UHP terrane to crustal levels where it underwent a relatively short amphibolite facies metamorphism. The end of that metamorphism is marked by 40Ar/39Ar ages in the 219–210 Ma range, implying cooling at crustal depths at rates of 50–200 °C Myr−1. Ages in the 210–170 Ma range may reflect protracted cooling or partial resetting by Jurassic or Cretaceous magmatism. Jurassic 166–149 Ma plutonism was followed by cooling at rates of c. 15 °C Myr−1, suggesting relatively deep crustal conditions, whereas Cretaceous 129–118 Ma plutonism was succeeded by cooling at rates of c. 50 C Myr−1, suggesting relatively shallow crustal depths.  相似文献   

3.
Magma ascent, decompression-induced H2O exsolution and crystallization is now recognized as an important process in hydrous subduction zone magmas. During the course of such a process calculations suggest that the ascent rate of a degassing and crystallizing mafic magma will be greater than crystal settling velocities. Thus, any crystals formed as a consequence of volatile exsolution will remain suspended in the magma. If the magma erupts before the percentage of suspended crystals reaches the critical crystallinity value for mafic magma (~55 vol.%) it will produce the commonly observed crystal rich island arc basalt lava. If the magma reaches its critical crystallinity before it erupts then it will stall within the crust. Extension of compaction experiments on a 55 vol.% sand-Karo syrup suspension at different temperatures (and liquid viscosities) to the likely viscosities of interstitial andesitic to dacitic liquid within such a stalled magma suggest that small amounts (up to ~10%) can be expelled on a time scale of 1–10 years. The expelled liquid can create a new intermediate to silicic body of magma that is related to the original mafic magma via fractional crystallization. The short time scale for liquid expulsion indicate that decompression-induced H2O exsolution and crystallization can be an important mechanism for fractional crystallization. Based on this assumption a general model of decompression-induced crystallization and fractionation is proposed that explains many of the compositional, mineralogical and textural features of Aleutian (and other andesites).  相似文献   

4.
We report in-situ produced 10Be data from the Gorge du Diable (French Western Alps) to date and quantify bedrock gorge incision into a glacial hanging valley. We sampled gorge sidewalls and the active channel bed to derive both long-term and present-day incision rates. 10Be ages of sidewall profiles reveal rapid incision through the late Holocene (ca 5 ka) at rates ranging from 6.5 to 13 mm yr−1. Present-day incision rates are significantly lower and vary from 0.5 to 3 mm yr−1 within the gorge. Our data imply either delayed initiation of gorge incision after final ice retreat from internal Alpine valleys at ca 12 ka, or post-glacial surface reburial of the gorge. Our results suggest that fluvial incision rates >1 cm yr−1 into crystalline bedrock may be encountered in transient landscape features induced by glacial-interglacial transitions.  相似文献   

5.
ABSTRACT Volume diffusion and dislocation creep at T  ∼ 800 °C led to high finite strain in granulite and orthogneiss of the Ohře crystalline complex (North Bohemian shear zone). Intragranular creep by volume diffusion is indicated by (i) lobate phase boundaries between feldspar and quartz, and (ii) removal of perthite lamellae and precipitation of tiny, aluminium-rich needles at the margins of K-feldspar. The striking diffusional-creep structures imply high interfacial free energy that has been preserved from equilibration as a result of rapid cooling. U–Pb dating of monazite (342 ± 1 Ma) and 40Ar–39Ar dating of muscovite (341 ± 4 Ma) of Kadaň orthogneiss result in a cooling rate of 50 + 25/−17 °C Myr−1. This high value is attributed to collapse-related 'elevator-style' movements along the North Bohemian shear zone, resulting in the juxtaposition of upper crustal rocks of the Tepla–Barrandian unit against lower crustal rocks of the Erzgebirge crystalline complex.  相似文献   

6.
P–T  paths based on parageneses in the immediate vicinity of former high-temperature contact zones between mantle peridotites and granulitic country rocks of the Central Vosges (NE France) were derived by applying several conventional thermometers and thermobarometric calculations with an internally consistent dataset. The results indicate that former garnet peridotites and garnet–spinel peridotites were welded together with crustal rocks at depths corresponding to 1–1.2 GPa. The temperature of the crustal rocks was about 650–700 °C at this stage, whereas values of 1100 °C (garnet peridotites) and 800–900 °C (garnet–spinel peridotites) were calculated for the ultramafic rocks. After emplacement of the mantle rocks, exhumation of the lower crust took place to a depth corresponding to 0.2–0.3 GPa. The temperatures of the incorporated peridotite slices were still high (900–1000 °C) at this stage. This is indicated by the presence of high- T  /low- P parageneses ( c . 800 °C, 0.2–0.3 GPa) in a small (1–10 m) contact aureole around a former garnet peridotite. Crustal rocks distant to the peridotites equilibrated in the same pressure range at lower temperature (650–700 °C). High cooling rates (102–103 °C Ma−1) were calculated for a garnet–biotite rock inclusion in the peridotites and for the crustal rocks at the contact by applying garnet–biotite diffusion modelling. Minimum rates of 0.75–7.5 cm a−1 are required for vertical ascent of rock units (30 km vertical distance) derived from the crust–mantle boundary, resulting in a late Variscan (340 Ma) high- T  /low- P event.  相似文献   

7.
At the eastern margin of the Bohemian Massif (Variscan belt of Central Europe), large bodies of felsic granulite preserve mineral assemblages and structures developed during the early stages of exhumation of the orogenic lower continental crust within the Moldanubian orogenic root. The development of an early steep fabric is associated with east–west-oriented compression and vertical extrusion of the high-grade rocks into higher crustal levels. The high-pressure mineral assemblage Grt-Ky-Kfs-Pl-Qtz-Liq corresponds to metamorphic pressures of ∼18 kbar at ∼850 °C, which are minimum estimates, whereas crystallization of biotite occurred at 13 kbar and ∼790 °C during decompression with slight cooling. The late stages of the granulite exhumation were associated with lateral spreading of associated high-grade rocks over a middle crustal unit at ∼4 kbar and ∼700 °C, as estimated from accompanying cordierite-bearing gneisses. The internal structure of a contemporaneously intruded syenite is coherent with late structures developed in felsic granulites and surrounding gneisses, and the magma only locally explored the early subvertical fabric of the felsic granulite during emplacement. Consequently, the emplacement age of the syenite provides an independent constraint on the timing of the final stages of exhumation and allows calculation of exhumation and cooling rates, which for this part of the Variscan orogenic root are 2.9–3.5 mm yr−1 and 7–9.4 °C Myr−1, respectively. The final part of the temperature evolution shows very rapid cooling, which is interpreted as the result of juxtaposition of hot high-grade rocks with a cold upper-crustal lid.  相似文献   

8.
Garnet from a kinzigite, a high-grade gneiss from the central Black Forest (Germany), displays a prominent and regular retrograde diffusion zoning in Fe, Mn and particularly Mg. The Mg diffusion profiles are suitable to derive cooling rates using recent datasets for cation diffusion in garnet. This information, together with textural relationships, thermobarometry and thermochronology, is used to constrain the pressure–temperature–time history of the high-grade gneisses. The garnet–biotite thermometer indicates peak metamorphic temperatures for the garnet cores of 730–810  °C. The temperatures for the outer rims are 600–650  °C. Garnet–Al2SiO5–plagioclase–quartz (GASP) barometry, garnet–rutile–Al2SiO5–ilmenite (GRAIL) and garnet–rutile–ilmenite–plagioclase–quartz (GRIPS) barometry yield pressures from 6–9  kbar. U–Pb ages of monazite of 341±2  Ma date the low- P high- T metamorphism in the central Black Forest. A Rb/Sr biotite–whole rock pair defines a cooling age of 321±2  Ma. The two mineral ages yield a cooling rate of about 15±2  °C Ma−1. The petrologic cooling rates, with particular consideration of the f O2 conditions for modelling retrograde diffusion profiles, agree with the geochronological cooling rate. The oldest sediments overlying the crystalline basement indicate a minimum cooling rate of 10  °C Ma−1.  相似文献   

9.
Petrological and geochronological data of six representative samples of exotic blocks of amphibolite and associated tonalite-trondhjemite from the serpentinitic mélange of the Sierra del Convento (eastern Cuba) indicate counterclockwise P–T paths typical of material subducted in hot and young subduction zones. Peak conditions attained were ∼750 °C and 15 kbar, consistent with the generation of tonalitic partial melts observed in amphibolite. A tonalite boulder provides a U-Pb zircon crystallization age of 112.8 ± 1.1 Ma, and Ar/Ar amphibole dating yielded two groups of cooling ages of 106–97 Ma (interpreted as cooling of metamorphic/magmatic pargasite) and 87–83 Ma (interpreted as growth/cooling of retrograde overprints). These geochronological data, in combination with other published data, allow the following history of subduction and exhumation to be established in the region: (i) a stage of hot subduction 120–115 Ma, developed upon onset of subduction; (ii) relatively fast near-isobaric cooling (25 °C Myr−1) 115–107 Ma, after accretion of the blocks to the upper plate lithospheric mantle; (iii) slow syn-subduction cooling (4 °C Myr−1) and exhumation (0.7 km Myr−1) in the subduction channel 107–70 Ma; and (iv) fast syn-collision cooling (74 °C Myr−1) and exhumation (5 km Myr−1) 70–60 Ma.  相似文献   

10.
40Ar/39Ar single-grain laserprobe dating of detrital white micas from early Oligocene to middle Miocene (31–14 Ma) sedimentary rocks of the central Swiss Molasse basin reveals three distinct clusters of cooling ages for the hinterland. Two Palaeozoic age clusters reflect cooling after the Variscan orogeny with only limited reheating during the Alpine orogeny. The third Tertiary age cluster reflecting late Alpine cooling is restricted to sediments younger than 20 Myr old. Micas with cooling ages < 30 Myr are interpreted to originate from the footwall of the Simplon detachment fault, thus representing formerly exposed upper levels of the present-day Lepontine metamorphic dome. Erosion of these levels is reflected by an increase of low-grade metamorphic lithic grains in the sandstones. This interpretation puts constraints on the timing of exhumation as well as on the evolution of the drainage pattern of the Central Alps.  相似文献   

11.
High-pressure metamorphic rocks exposed in the Bantimala area, c . 40  km north-east of Ujung Pandang, were formed as a Cretaceous subduction complex with fault-bounded slices of melange, chert, basalt, turbidite, shallow-marine sedimentary rocks and ultrabasic rocks. Eclogites, garnet–glaucophane rocks and schists of the Bantimala complex have estimated peak temperatures of T  =580–630 °C at 18  kbar and T  =590–640 °C at 24  kbar, using the garnet–clinopyroxene geothermometer. The garnet–omphacite–phengite equilibrium is used to estimate pressures. The distribution coefficient K D1=[( X pyr)3( X grs)6/( X di)6]/[(Al/Mg)M2,wm (Al/Si)T2,wm]3 among omphacite, garnet and phengite is a good index for metamorphic pressures. The K D1values of the Bantimala eclogites were compared with those of eclogites with reliable P–T  estimates. This comparison suggests that peak pressures of the Bantimala eclogites were P =18–24  kbar at T  =580–640 °C. These results are consistent with the P–T  range calculated using garnet–rutile–epidote–quartz and lawsonite–omphacite–glaucophane–epidote equilibria.  相似文献   

12.
Apatite fission track dating from a central transect in the Argentera massif (southernmost External Crystalline Massif = ECM) yielded ages between 8.05 ± 0.6 and 2.4 ± 0.2 Myr, with a positive age/altitude correlation above 3 Ma, 1200 m. Recognising a thermal peak at c . 250°C, 33 Ma, based on stratigraphic, metamorphic and 39Ar/40Ar data, the present results suggest a slow cooling rate (8–5°C) for the Argentera massif during the Oligocene–early Pliocene. This rate compares with that from the Pelvoux massif, but contrasts with those observed in the northern ECM (Mont-Blanc and Aar: up to 14°C Myr−1) for the same time interval. This can be related to the different location of the ECM within the collided European margin. At about 3–4 Ma, the denudation rate would have increased up to c . 1 mm yr−1 in the Argentera massif, reaching the same value as in the Belledonne and northern ECM, likely a consequence of Penninic thrust inversion.  相似文献   

13.
The south-east Reynolds Range, central Australia, is cut by steep north-west-trending Alice Springs age ( c. 334  Ma) shear zones that are up to hundreds of metres wide and several kilometres long with reverse senses of movement. Amphibolite facies (550–600  °C, 500–600  MPa) shear zones cut metapelites, while greenschist facies shear zones (420–535  °C, 400–650  MPa) cut metagranites. The sheared rocks commonly underwent metasomatism implying that the shear zones were the pathways of significant fluid flow. Altered granites within greenschist facies shear zones have gained Si and K but lost Ca and Na relative to their unsheared counterparts, suggesting that the fluid flowed down-temperature (and hence probably upward) through the shear zones. Time-integrated fluid fluxes calculated from silica addition are up to 2.1×1010 mol  m−2 ( c. 4.2×105  m3  m−2). Similar time-integrated fluid fluxes are also estimated from changes in K and Na. The sheared granitic rocks locally have δ18O values as low as 0 which is much lower than the δ18O values of the adjacent unsheared granites (7 to 9), implying that the fluid which flowed through these shear zones was derived from the surface. For the estimated time-integrated fluid fluxes, the fluids would be able to retain their isotopic signature for many tens to hundreds of kilometres. The flow of surface-derived fluids into the ductile middle crust, with subsequent expulsion upwards through the shear zones, may have been driven by seismic activity accompanying the Alice Springs deformation.  相似文献   

14.
Diffusion modelling is applied to layered garnet–pyroxene–quartz coronas, formed by a pressure-induced reaction between plagioclase and primary pyroxene in a metabasic granulite. The reconstructed reaction involves some change in composition of reactant minerals. The distribution of minerals between layers is satisfactorily explained by diffusion-controlled reaction with local equilibrium, in which the diffusion coefficient for Al was smaller than those for Fe, Mg and Ca by a factor of approximately four. Diffusion of Mg towards plagioclase implies a chemical-potential gradient for MgO component in a direction opposite to the changing Mg content of garnet; this is explained by the influence of Al2O3 on the chemical potential of the pyrope end-member. Grain-boundary diffusion is suggested to have operated, possibly with composition gradients different from those in the bulk minerals. Chemical-potential differences across the corona are estimated from the variation in garnet composition, enabling affinity (the free energy change driving the reaction) to be estimated as 6.9±1.8  kJ per 24-oxygen mole of garnet produced. This implies that the pressure for equilibrium among the minerals was overstepped by 1.4±0.4  kbar. The probable P–T conditions of reaction were in the range 650–790  °C, 8–10  kbar. Assuming a timescale of reaction between 106 and 108 years, estimated diffusion coefficients for Fe, Mg and Ca are in the range 9×10−23 to 5×10−20 m2 s−1. These are consistent with experimental values in the literature for solid-state diffusion, including grain-boundary diffusion.  相似文献   

15.
The divergent plate boundary in Iceland is characterized by 40–80 km long and 5–10 km wide swarms of tension fractures (∼102 m long) and normal faults (∼103 m long). The upper part of the crust is mainly composed of lava flows, with abundant columnar joints that are mostly perpendicular to the lava contacts. The lava flows are horizontal at the surface of the rift zone but become tilted at the rate of 1° for every 150 m depth in the crust. At the surface of the rift zone the joints are vertical and parallel to the vertical principal stress. Because of tilting of the lava pile, the columnar joints become oblique to this stress, hence becoming potential shear fractures, and form echelon sets at greater depths in the crust. Theoretical considerations suggest that normal faults start to nucleate on sets of en echelon columnar joints and/or large-scale tension fractures at crustal depths of 0.5–1.5 km. The width (depth) must be the smallest (controlling) dimension of many faults. Nevertheless, there is a positive linear relation (r = 0.91) between maximum throw and length of the Holocene faults. If the faults grow as self-similar structures, the throw-length relationship can be explained by a similar relation between fault length and width.  相似文献   

16.
Refinements have been made to achieve over 99% yield in the conversion of CO to CO2 in order to improve the reproducibility and accuracy of δ18 O measurements in sulfates. BaSO4 (10-15 mg) was mixed with an identical amount of spectrographic-grade graphite and loaded into a Pt boat. The mixture was gradually heated to 1100 °C to reduce sulfate to CO and CO2; the former gas was simultaneously converted to CO2 by a glow discharge between Pt electrodes immersed in a magnetic field (produced by a pair of external neodymium magnets). A small memory effect was noticed during the analysis (less than 0.3‰ per 10‰ difference in δ18 O between two subsequently analysed samples). The memory effect, however, was suppressed by repetitive preparation of the same specimen. CO2 produced in this way from sulfate reference samples was analysed on a dual inlet and triple collector mass spectrometer along with CO2 equilibrated with VSMOW, GISP and SLAP water reference samples. To avoid large departures of measured isotope ratios from 18O/16O of the working calibrator we used CO2 gas prepared from ocean water sulfate for this purpose. The calibrated δ18 O values (in ‰) obtained in this way for NBS-127, IAEA SO-5 and IAEA SO-6 reference materials were 8.73 ± 0.05, 12.20 ± 0.07 and -10.43 ± 0.12, respectively.  相似文献   

17.
Timing constraints on shear zones can provide an insight into the kinematic and exhumation evolution of metamorphic belts. In the Musgrave Block, central Australia, granulite facies gneisses have been affected, to varying degrees, by mylonitic deformation, some of which attained eclogite facies. The Davenport Shear Zone is a dominant strike-slip system that formed at eclogite facies conditions ( T  ≈650  °C and P ≈12.0  kbar). Sm–Nd mineral isochrons obtained from equilibrated high-pressure assemblages, as well as 40Ar–39Ar data, show that the eclogite and greenschist facies high-strain overprints were coeval, at c .  550  Ma. Mylonitic processes do not appear to have reset the U–Pb system in zircon, but may have partially disturbed it. The thermal gradient in the Musgrave Block crust at c .  550  Ma was c .  16  °C  km−1 and at c .  535  Ma was c .  18  °C  km−1, based on P – T  estimates of eclogite and greenschist facies shear zones, respectively. These estimates are similar to present-day geothermal gradients in many stable continental shield areas, suggesting that the region did not undergo a significant transient perturbation of the geotherm. Therefore, in the Musgrave Block, cooling subsequent to eclogite facies metamorphism appears to have been controlled by exhumation, rather than by the removal of a heat source. Estimated exhumation rates in the range 0.2 to ≥1.5  mm year−1 are comparable with other orogenic belts, rather than cratonic areas elsewhere.  相似文献   

18.
ABSTRACT Deeply buried 1.5 Ga Polish anorthosites, accessible only by bore holes, reveal diagnostic features of some massif-type anorthosites (polybarism, jotunitic parent magma), diapirically emplaced in the mid crust together with the rapakivi granites of the EW-trending Mazury complex, intruded along a major crustal discontinuity. Geochemical modelling and isotope data corroborate recent experimental work on the basaltic system in dry conditions: the source rock of the parental magma is a gabbronorite, necessarily lying in the lower crust. Since no Archaean crust is known in the region, high initial 188Os/187Os ratios for sulphide-oxide isochrons and negative εNd values are best accounted for by melting a ∼ 2.0 Ga mafic crust.  相似文献   

19.
Explosive eruptions at Mauna Loa summit ejected coarse-grained blocks (free of lava coatings) from Moku'aweoweo caldera. Most are gabbronorites and gabbros that have 0–26 vol.% olivine and 1–29 vol.% oikocrystic orthopyroxene. Some blocks are ferrogabbros and diorites with micrographic matrices, and diorite veins (≤ 2 cm) cross-cut some gabbronorites and gabbros. One block is an open-textured dunite.

The MgO of the gabbronorites and gabbros ranges  7–21 wt.%. Those with MgO > 10 wt.% have some incompatible-element abundances (Zr, Y, REE; positive Eu anomalies) lower than those in Mauna Loa lavas of comparable MgO; gabbros (MgO < 10 wt.%) generally overlap lava compositions. Olivines range Fo83–58, clinopyroxenes have Mg#s  83–62, and orthopyroxene Mg#s are 84–63 — all evolved beyond the mineral-Mg#s of Mauna Loa lavas. Plagioclase is An75–50. Ferrogabbro and diorite blocks have  3–5 wt.% MgO (TiO2 3.2–5.4%; K2O 0.8–1.3%; La 16–27 ppm), and a diorite vein is the most evolved (SiO2 59%, K2O 1.5%, La 38 ppm). They have clinopyroxene Mg#s 67–46, and plagioclase An57–40. The open-textured dunite has olivine  Fo83.5. Seven isotope ratios are 87Sr/86Sr 0.70394–0.70374 and 143Nd/144Nd 0.51293–0.51286, and identify the suite as belonging to the Mauna Loa system.

Gabbronorites and gabbros originated in solidification zones of Moku'aweoweo lava lakes where they acquired orthocumulate textures and incompatible-element depletions. These features suggest deeper and slower cooling lakes than the lava lake paradigm, Kilauea Iki, which is basalt and picrite. Clinopyroxene geobarometry suggests crystallization at < 1 kbar P. Highly evolved mineral Mg#s, < 75, are largely explained by cumulus phases exposed to evolving intercumulus liquids causing compositional ‘shifts.’ Ferrogabbro and diorite represent segregation veins from differentiated intercumulus liquids filter pressed into rigid zones of cooling lakes. Clinopyroxene geobarometry suggests < 300 bar P. Open-textured dunite represents olivine-melt mush, precursor to vertical olivine-rich bodies (as in Kilauea Iki). Its Fo83.5 identifies the most primitive lake magma as  8.3 wt.% MgO. Mass balancing and MELTS show that such a magma could have yielded both ferrogabbro and diorite by ≥ 50% fractional crystallization, but under different fO2: < FMQ (250 bar) led to diorite, and FMQ (250 bar) yielded ferrogabbro. These segregation veins, documented as similar to those of Kilauea, testify to appreciable volumes of ‘rhyolitic’ liquid forming in oceanic environments. Namely, SiO2-rich veins are intrinsic to all shields that reached caldera stage to accommodate various-sized cooling, differentiating lava lakes.  相似文献   


20.
This raised delta structure is an ice-contact deltaic complex with a volume of c. 4.4.109 m3, deposited c . 9500 yr BP in a shallow wide 'fjord' during the retreat of the Scandinavian ice cap. The delta plain lies at an altitude of 200–223 m. It aggraded c . 20 m above the contemporaneous sea level during a regional marine regression. The braidplain palaeochannel characteristics indicate a peak meltwater discharge of 7–9 103 m3/s. Calculations based on a glacial ablation model indicate a mid-summer discharge of c . 5.5 103 m3/s. However, the fluvial topset of the delta has an erosive base whose altitude decreases upstream and indicates stream incision by more the 6 m below the contemporaneous sea level. The deep scour is ascribed to episodic floods over the relatively short delta plain, which exceeded direct ablation-associated discharges. The depositional time-span of the delta is assessed to have been 70 years, calculated from coastal gradient and shoreline displacement curves. The average sedimentation rate of the delta is thereby inferred to have been extremely high, c . 6. 107 m3/yr. The sedimentation is thought to reflect 'extreme' ice-margin conditions, where the sediment and water discharge was maximized by full-scale ablation, with simultaneous subglacial, englacial and supraglacial sediment and water supply. These conditions might further coincide with an abundant rainfall in the catchment area or the drainage of dammed waters, initiating episodic floods which eroded deep beneath sea level. As a whole, the study illustrates the hydrological conditions of proglacial sedimentation at the front of the rapidly retreating last Scandinavian ice cap.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号