首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Deformation of granulite-facies rocks in the Moldanubian Zone of the southern Bohemian Massif is expressed in two intersecting planar fabrics - steeply disposed (S1) and flat-laying (S2) - which correspond to two deformation stages (D1) and (D2). The existing Sm-Nd garnet ages from banded granulite gneisses, new U-Pb zircon data from deformed granite intrusions within the granulite gneisses, and the P-T and field structural relations constrain the ages and P-T conditions of the two deformation phases. The early deformation (D1) was associated with a HP-HT metamorphic stage with a minimum age of ca. 354 Ma which was followed by a near-isothermal decompression. A concordant U-Pb zircon age of 318ǃ Ma dates the emplacement of intrusions of deformed granite into the granulite gneisses and constrains deformation phase (D2). This phase was associated with an LP-HT metamorphism dated in the region at ca. 340-330 Ma. The available structural and isotopic data indicate that granulites in the southern Bohemian Massif were exhumed from lower to middle crust during compression. The structural relations and P-T-t data for the studied granulites are consistent with their exhumation by near-vertical extrusion of the softened orogenic root.  相似文献   

2.
《Sedimentary Geology》2005,173(1-4):53-89
Three related basins in southern Turkey, the Ecemiş Basin, the Karsanti Basin and the Aktoprak Basin, document the Neogene-Recent regional exhumation and surface uplift history of the Central Taurus Mountains. The regional tectonic framework was established by a Late Eocene phase of compressional deformation that ended Tethys-related marine deposition. During the Oligocene–Early Miocene non-marine sedimentation was dominantly from braided rivers flowing from the nascent Taurus Mountains and from the Niğde metamorphic massif further north. During this period erosion more or less kept pace with exhumation and the topography remained subdued, allowing a marine incursion (probably eustatically controlled) into the Karsanti Basin in the east during Early Oligocene time. Regional exhumation was possibly controlled by thermal uplift of an actively extending area located behind the subducting S-Neotethys in the Eastern Mediterranean Sea. During exhumation, largely ophiolitic rocks were eroded, revealing the deformed Mesozoic Tauride carbonate platform beneath. The area was affected by a short-lived pulse of compressional deformation/transpression, probably in Mid-Miocene time, but extensional exhumation then resumed, as indicated by the presence of metamorphic-derived clasts from the adjacent Niğde Massif. Late Miocene deposition was dominated by large inward-draining lakes, consistent with regional evidence of a humid climate during this time. Strong surface uplift took place during Plio-Quaternary time. Drainage to the Mediterranean became established, allowing river valleys to incise deeply into the flanks of the Taurus Mountains. Palaeo-valleys were successively infilled with coarse alluvial sediments. This deposition was influenced by NE–SW trending extensional faults. In addition, the sedimentary evolution of the area was strongly influenced by the NNE–SSW trending Ecemiş Fault Zone, which has experienced ca. 60 km of left-lateral strike-slip since the Late Eocene. An important pulse of normal faulting/transtension in latest Miocene–early Pliocene time generated large fault scarps. These acted as sources for large Plio-Quaternary alluvial fans, which prograded across active strike-slip faults. The morphology of these fans was influenced by a combination of Quaternary climatic change, axial-fluvial downcutting and active strike-slip tectonics. In general, the Plio-Quaternary regional uplift of the Taurus Mountains may relate to underplating of material derived from the African plate during progressive collision with the Anatolian (Eurasian) plate in the vicinity of the easternmost Mediterranean Sea.  相似文献   

3.
The Northern, Central, and Southern zones are distinguished by stratigraphic, lithologic, and structural features. The Northern Zone is characterized by Upper Silurian–Lower Devonian sedimentary rocks, which are not known in other zones. They have been deformed into near-meridional folds, which formed under settings of near-latitudinal shortening during the Ellesmere phase of deformation. In the Central Zone, mafic and felsic volcanic rocks that had been earlier referred to Carboniferous are actually Neoproterozoic and probably Early Cambrian in age. Together with folded Devonian–Lower Carboniferous rocks, they make up basement of the Central Zone, which is overlain with a angular unconformity by slightly deformed Lower (?) and Middle Carboniferous–Permian rocks. The Southern Zone comprises the Neoproterozoic metamorphic basement and the Devonian–Triassic sedimentary cover. North-vergent fold–thrust structures were formed at the end of the Early Cretaceous during the Chukchi (Late Kimmerian) deformation phase.  相似文献   

4.
The Anita Peridotite is a ~20 km long by 1 km wide exhumed fragment of spinel facies sub‐arc lithospheric mantle that is enclosed entirely within the ≤4 km wide ductile Anita Shear Zone, and bounded by quartzofeldspathic lower crustal gneisses in Fiordland, south‐western New Zealand. Deformation textures, grain growth calculations and thermodynamic modelling results indicate the mylonitic peridotite fabric formed during rapid cooling, and therefore likely during extrusion. However, insights into the exhumation process are gained through examination of aluminous garnet‐bearing meta‐sedimentary gneisses also enclosed within the shear zone. P–T calculations indicate that prior to mylonitization the gneisses enclosing the peridotite equilibrated at 675–746 °C in the sillimanite stability field (stage I), before being buried to near the base of thickened arc crust (stage II; ~686 ± 26 °C and 10.7 ± 0.8 kbar). From this point on, the peridotite unit and the quartzofeldspathic rocks share a deformation history involving extensive recrystallization (stage III) within the Anita Shear Zone. Coupled exhumation of these portions of lower crust and upper mantle occurred during regional thinning of over‐thickened lithosphere at c. 104 Ma (U–Pb zircon). Our favoured model for the exhumation process involves heterogeneous transpressive deformation within the translithospheric Anita Shear Zone, which provided a conduit for ductile extrusion through the crust.  相似文献   

5.
The Eclogite Zone, of the Tauern Window is an exhumed subduction channel comprising eclogites with different grades of retrogression in a matrix of high-pressure metasediments. The rocks were exposed to 600 °C and 20–25 kbars, and then retrogressed during their exhumation, first under blueschist facies and later under amphibolite facies metamorphism. To gain insights into the deformation within the subduction channel during subduction and exhumation, both fresh and retrogressed eclogites, as well as the surrounding metasediments were investigated with respect to their deformation microstructures and crystallographic preferred orientations (CPOs). Pristine and retrogressed eclogites show grain boundary migration and subgrain rotation recrystallization microstructures in omphacite. A misorientation axes analysis reveals the activity of complementary deformation mechanisms including grain boundary sliding and dislocation creep. The omphacite CPOs of the eclogites correspond to dominant SL-fabrics characteristic of plane strain deformation, though there are local variations towards flattening or constriction within the paleosubduction channel. The glaucophane CPOs in retrogressed eclogites match those of omphacite, suggesting that a constant strain geometry persisted during exhumation at blueschist facies conditions. Plastic deformation of the host high-pressure metasediments outlasted that of the eclogites, as indicated by white mica fabrics and quartz CPO. The latter is consistently asymmetric, pointing to the operation of non-coaxial deformation. The microstructures and CPO data indicate a continuous plastic deformation cycle with eclogite and blueschist facies metamorphism related to subduction and exhumation of the different rock units.  相似文献   

6.
In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.  相似文献   

7.
Interpretations of deformation processes within ductile shear zones are often based on the characterisation of microstructures preserved in exhumed rocks. However, exhumed microstructures provide only a snapshot of the closing stages of deformation and we need ways of understanding how microstructures change through time and at what rate this occurs. To address this problem, we study optical microstructures and electron backscatter diffraction (EBSD) data from samples of quartz layers deflected around garnet porphyroclasts (which generate local stress and strain rate perturbations) during mylonitic deformation in the Alpine Fault Zone of New Zealand.During shearing around rigid garnet porphyroclasts, quartz undergoes grain size reduction in response to locally increased stresses, while c-axes reveal increasing components of rhomb <a> and prism <a> slip, reflecting a local increase in shear strain and strain rate. TitaniQ thermobarometry and quartz microstructures suggest a rather narrow range of recorded quartz deformation temperatures around 450–500 °C, which we propose reflects the cessation of grain boundary migration driven deformation. Given that temperatures well above the brittle–ductile transition for quartz (∼350 °C) are preserved, we anticipate that rapid cooling and exhumation must have occurred from the 500 °C isotherm. Ultimately, we propose a modified geotherm for the central Alpine Fault Zone hanging wall, which raises the 500 °C isotherm to 11 km depth, near the brittle–ductile transition. Our updated Alpine Fault Zone geotherm implies a hotter and weaker middle to lower crust than previously proposed.  相似文献   

8.
Recently discovered gold-rich mineral deposits in the eastern Nadaleen trend of northeastern Yukon Territory occur in unmetamorphosed Neoproterozoic carbonate and siliciclastic rocks and their location is partly controlled by structures. Regional deformation largely resulted from mid-Cretaceous NNE-vergent, thin-skinned fold-thrust activity. However, structures in the eastern Nadaleen trend are more complex and include strike-slip and reverse faults, and SSW-, W-, and E-plunging folds. Local structures are cospatial with regional geologic features, including (1) an E-striking structural triangle zone defined by oppositely dipping reverse faults that verge toward the eastern Nadaleen trend, (2) a transition zone between Paleozoic Ogilvie platform rocks in the north to Selwyn basin rocks in the south, and (3) a change in regional deformation character from west to east, whereby to the west, rocks in the south are more deformed than rocks in the north, whereas to the east, rocks show no obvious change in deformation style. The structural complexity within the eastern Nadaleen trend probably resulted from these regional geological features and was further complicated by local competency contrasts between rock units. The cospatial location of the regional geological features may have been caused by a pre-existing, W-trending subsurface basement structure. Reverse faults bounding the E-striking triangle zone may have acted as low permeability aquitards that directed mineralizing fluids up-dip into reactive carbonate stratigraphy in the eastern Nadaleen trend. Gold-rich mineral deposits in the eastern Nadaleen trend occur preferentially in SSW-plunging anticlines and near faults, both of which probably influenced the migration of mineralizing fluid.  相似文献   

9.
In the Orlica–?nie?nik Dome (NE Bohemian massif), alternating belts of orthogneiss with high‐pressure rocks and belts of mid‐crustal metasedimentary–metavolcanic rocks commonly display a dominant subvertical fabric deformed into a subhorizontal foliation. The first macroscopic foliation is subvertical, strikes NE–SW and is heterogeneously folded by open to isoclinal folds with subhorizontal axial planes parallel to the heterogeneously developed flat‐lying foliation. The metamorphic evolution of the mid‐crustal metasedimentary rocks involved successive crystallization of chlorite–muscovite–ilmenite–plagioclase–garnet, followed by staurolite‐bearing and then kyanite‐bearing assemblages in the subvertical fabric. This was followed by garnet retrogression, with syntectonic crystallization of sillimanite and andalusite parallel to the shallow‐dipping foliation. Elsewhere, andalusite and cordierite statically overgrew the flat‐lying fabric. With reference to a P–T pseudosection for a representative sample, the prograde succession of mineral assemblages and the garnet zoning pattern with decreasing grossular, spessartine and XFe are compatible with a P–T path from 3.5–5 kbar/490–520 °C to peak conditions of 6–7 kbar/～630 °C suggesting burial from 12 to 25 km with increasing temperature. Using the same pseudosection, the retrograde succession of minerals shows decompression to sillimanite stability at ～4 kbar/～630 °C and to andalusite–cordierite stability at 2–3 kbar indicating exhumation from 25 km to around 9–12 km. Subsequent exhumation to ～6 km occurred without apparent formation of a deformation fabric. The structure and petrology together with the spatial distribution of the metasedimentary–metavolcanic rocks, and gneissic and high‐pressure belts are compatible with a model of burial of limited parts of the upper and middle crust in narrow cusp‐like synclines, synchronous with the exhumation of orogenic lower crust represented by the gneissic and high‐pressure rocks in lobe‐shaped and volumetrically more important anticlines. Converging P–T–D paths for the metasedimentary rocks and the adjacent high‐pressure rocks are due to vertical exchanges between cold and hot vertically moving masses. Finally, the retrograde shallow‐dipping fabric affects both the metasedimentary–metavolcanic rocks and the gneissic and high‐pressure rocks, and indicates that the ～15‐km exhumation was mostly accommodated by heterogeneous ductile thinning associated with unroofing of a buoyant crustal root.  相似文献   

10.
角闪岩相变形是大别山超高压变质岩的主期变形 ,露头和显微尺度的构造要素主要由这期变形产生 ,通过对超高压变质岩带内韧性剪切带中花岗片麻岩的Rb -Sr同位素年龄测定 ,获得一条变形花岗片麻岩的全岩 -白云母内部等时线年龄 ,表明超高压变质岩的角闪岩相变形产生于180Ma左右 ,超高压变质岩的主期变形确实为同角闪岩相变质期变形 ,该年龄与超高压变质岩的第二次快速冷却年龄一致 ,由此证实超高压变质岩在180Ma左右快速从下地壳折返至中地壳  相似文献   

11.

From the early Late Permian onwards, the northeastern part of the Sydney Basin, New South Wales, (encompassing the Hunter Coalfield) developed as a foreland basin to the rising New England Orogen lying to the east and northeast. Structurally, Permian rocks in the Hunter Coalfield lie in the frontal part of a foreland fold‐thrust belt that propagated westwards from the adjacent New England Orogen. Thrust faults and folds are common in the inner part of the Sydney Basin. Small‐scale thrusts are restricted to individual stratigraphic units (with a major ‘upper decollement horizon’ occurring in the mechanically weak Mulbring Siltstone), but major thrusts are inferred to sole into a floor thrust at a poorly constrained depth of approximately 3 km. Folds appear to have formed mainly as hangingwall anticlines above these splaying thrust faults. Other folds formed as flat‐topped anticlines developed above ramps in that floor thrust, as intervening synclines ahead of such ramp anticlines, or as decollement folds. These contractional structures were overprinted by extensional faults developed during compressional deformation or afterwards during post‐thrusting relaxation and/or subsequent extension. The southern part of the Hunter Coalfield (and the Newcastle Coalfield to the east) occupies a structural recess in the western margin of the New England Orogen and its offshore continuation, the Currarong Orogen. Rocks in this recess underwent a two‐stage deformation history. West‐northwest‐trending stage one structures such as the southern part of the Hunter Thrust and the Hunter River Transverse Zone (a reactivated syndepositional transfer fault) developed in response to maximum regional compression from the east‐northeast. These were followed by stage two folds and thrusts oriented north‐south and developed from maximum compression oriented east‐west. The Hunter Thrust itself was folded by these later folds, and the Hunter River Transverse Zone underwent strike‐slip reactivation.  相似文献   

12.
Regional variation in the P–T path of the Sambagawa metamorphic rocks, central Shikoku, Japan has been inferred from compositional zoning of metamorphic amphibole. Rocks constituting the northern part (Saruta River area) exhibit a hairpin type P–T path, where winchite/actinolite grew at the prograde stage, the peak metamorphism was recorded by the growth of barroisite to hornblende and sodic amphibole to winchite/actinolite grew at the retrograde stage. In the southern part (Asemi River area), rocks exhibit a clockwise type P–T path, where barroisite to hornblende core is rimmed by winchite to actinolite. The difference in P–T path could suggest a faster exhumation rate (i.e. more rapid decompression) in the southern than in the northern part. On the other hand, physical conditions of deformation during the exhumation stage have been independently inferred from microstructures in deformed quartz. Recrystallized quartz grains in rocks from the low‐grade (chlorite and garnet) zones are much more stretched in the southern part (aspect ratio ≥ 4.0) than in the northern part (aspect ratio< 4.0), indicating a higher strain rate in the former than in the latter. These facts may indicate that the exhumation and strain rates are correlated (i.e. the exhumation rate increases with increasing the strain rate). The difference in the exhumation rate inferred from amphibole zoning between the northern and southern parts could be explained by an extensional model involving normal faulting, where the lower plate can be exhumed faster than the upper plate due to the displacement along the fault. Furthermore, the model may explain the positive correlation between the exhumation and strain rates, because the lower plate tended to support more stress than the upper plate.  相似文献   

13.
藏北羌塘盆地褶皱形变研究   总被引：9，自引：5，他引：4       下载免费PDF全文
羌塘盆地由于受多期构造活动的影响形成多个构造层,不同构造层的变形特征存在明显差异。其中三叠纪构造层多形成一些紧闭倒转的小型背、向斜褶皱,侏罗纪构造层内多发育大型宽缓的背、向斜及复背斜、复向斜,而白垩纪—新近纪构造层多位于向斜核部和背斜翼部,形成宽缓的褶曲。褶皱变形以近东西向为主,从老到新不同构造层形成的褶皱由紧闭到宽缓,存在一定的继承性和递进叠加的特点。褶皱轴迹的空间展布及变形特点表明不同时期板块的拼合挤压是导致盆地变形的主要驱动力,基底断裂及基底凸凹变化对褶皱的展布和变形有一定程度的控制和影响。  相似文献   

14.
The NW-SE trending Sanandaj-Sirjan Zone (SSZ) is the internal part of the Zagros continental collision zone, which mainly consists of metamorphic rocks deformed in a dextral transpressional zone. This dextral transpression is attributed to brittle deformation related to late Cenozoic Arabia-Eurasia oblique continental collision. Major NW-trending faults, including the Dalan, Garmdareh, Yasechah, Sheida, and Ben faults, are reverse faults with a dextral strike-slip component. These faults were displaced by NW-trending synthetic and NE-trending antithetic faults. There are also E-trending thrusts and N-trending normal faults developing in directions that are, respectively, almost normal and parallel to the major shortening direction. The NW-trending Ben, Yasechah, and Sheida faults are NE-dipping faults, and the Dalan and Garmdareh faults are SW-dipping faults. These faults indicate the presence of a transpressive flower structure zone that probably led to the exhumation of Jurassic high-grade metamorphic rocks, such as eclogite, in the central part of the study area.  相似文献   

15.
Abstract The Protogine Zone comprises a system of anastomosing deformation zones which approximately parallel the eastern boundary of the Sveconorwegian (1200–900 Ma) province in south-west Sweden. Ages of granulite facies metamorphism in the Sveconorwegian province require exhumation from c . 30 to 35 km crustal depths after 920–880 Ma. 40Ar/39 Ar cooling ages are presented for muscovite from high-alumina rocks formed by hydrothermal leaching associated with the Protogine Zone. Growth of fabric-defining minerals was associated with a ductile deformational event; muscovite from these rocks cooled below argon retention temperatures ( c . 375 ± 25° C) at c . 965–955 Ma. Muscovite from granofels in zones of intense alteration indicates that temperatures > 375 ± 25° C were maintained until c . 940 Ma. Textural relations of Al2SiO5 polymorphs and chloritoid suggest that dated fabrics formed during exhumation. The process of exhumation, brittle overprint on ductile structures and hydrothermal activity along faults within the Protogine Zone tentatively are interpreted as the peripheral effects of initial Neoproterozoic exhumation of the granulite region of south-western Sweden.
Muscovite in phyllonites associated with the 'Sveconorwegian thrust system'cooled below argon retention temperatures at c . 927 Ma. Exhumation associated with this cooling could have been related to extension and onset of brittle-ductile deformation superimposed on Sveconorwegian contraction.  相似文献   

16.
《Geodinamica Acta》2001,14(6):345-360
In the southeastern Ötztal basement remnants of eo-Alpine high-pressure metamorphism as well as deformation related to the emplacement of these eclogites are preserved. The eo-Alpine age of the two main ductile deformation phases is constrained by Ar-Ar and Rb-Sr mica cooling ages of about 80 Ma, providing a lower, and by deformed Permo-Mesozoic rocks, providing an upper time limit. While high-pressure minerals (M1) are aligned along structures of the first deformation phase (D1), subsequently grown amphibolite facies minerals (M2) are late- to post-kinematic with respect to the third phase (D3). D1 is characterized by non-coaxial deformation producing an E-W oriented stretching lineation, the younger phases D2 and D3 by folding, where the older set of folds strikes N-S, the younger one E-W. These results imply a basic change of tectonic movement direction during the eo-Alpine event. Structural and petrological evidences favour a two-stage exhumation model, where tectonic exhumation (D1, D2 and D3) is correlated with the first stage, statically overprinted under amphibolite facies conditions (M2). As there is no evidence of significant deformation after this stage, erosion and surface uplift most probably represent the relevant processes for the last part of the exhumation path. During this stage the high-pressure rocks were exhumed from amphibolite facies conditions to the surface.  相似文献   

17.
New 40Ar/39Ar geochronology places time constraints on several stages of the evolution of the Penninic realm in the Eastern Alps. A 186±2 Ma age for seafloor hydrothermal metamorphic biotite from the Reckner Ophiolite Complex of the Pennine–Austroalpine transition suggests that Penninic ocean spreading occurred in the Eastern Alps as early as the Toarcian (late Early Jurassic). A 57±3 Ma amphibole from the Penninic subduction–accretion Rechnitz Complex dates high-pressure metamorphism and records a snapshot in the evolution of the Penninic accretionary wedge. High-pressure amphibole, phengite, and phengite+paragonite mixtures from the Penninic Eclogite Zone of the Tauern Window document exhumation through ≤15 kbar and >500 °C at 42 Ma to 10 kbar and 400 °C at 39 Ma. The Tauern Eclogite Zone pressure–temperature path shows isothermal decompression at mantle depths and rapid cooling in the crust, suggesting rapid exhumation. Assuming exhumation rates slower or equal to high-pressure–ultrahigh-pressure terrains in the Western Alps, Tauern Eclogite Zone peak pressures were reached not long before our high-pressure amphibole age, probably at ≤45 Ma, in accordance with dates from the Western Alps. A late-stage thermal overprint, common to the entire Penninic thrust system, occurred within the Tauern Eclogite Zone rocks at 35 Ma. The high-pressure peak and switch from burial to exhumation of the Tauern Eclogite Zone is likely to date slab breakoff in the Alpine orogen. This is in contrast to the long-lasting and foreland-propagating Franciscan-style subduction–accretion processes that are recorded in the Rechnitz Complex.  相似文献   

18.
Both erosion and surface topography cause a time-dependent variation in isotherm geometry that can result in significant errors in estimating natural exhumation rates from geochronologic data. Analytical solutions and two-dimensional numerical modelling are used to investigate the magnitude of these inaccuracies for conditions appropriate to many rapidly exhumed mountain chains of rugged relief. It is readily demonstrated that uplift of the topographic surface has a negligible effect on the cooling history of an exhumed rock sample and cannot be quantified by current geochronologic methods. The topography itself perturbs the isotherms to a depth that depends on both the vertical and horizontal scale of the surface relief. Estimations employing different isotopic systems in the same sample with higher closure temperatures (> 200°C) are not generally influenced by topography. However, direct conversion of cooling rates to exhumation rates assuming a simple constant linear geotherm markedly underestimates peak rates, due to variation of the geothermal gradient in time and space and to the time lag between exhumation and cooling. Estimations based on the altitude variation in apatite fission-track ages are less prone to such inaccuracies in geothermal gradient but are affected by near-surface time-dependent variation in isotherm depth due to advection and topography. In tectonically active mountain belts, high exhumation rates are coupled with rugged topography, and exhumation rates may be markedly overestimated, by factors of 2 or more. Even at lower exhumation rates on the order of 1 mm/a, the shape of the cooling curve is modified by advection and topography. A convex-concave shape to the cooling curve does not necessarily imply a change of exhumation rate; it may also be attained by a more complicated geothermal gradient induced by topographic relief. Very fast cooling below 100°C, often interpreted as reflecting faster exhumation, can be more simply explained by the lateral cooling effect of topographic relief, with samples exhumed in valleys displaying a different near-surface cooling history to those on ridge crests.  相似文献   

19.
In the Dora Maira Massif, western Alps, essentially undeformed ultrahigh-pressure (UHP) metamorphic granites (Brossasco granite) are embedded in, and locally grade into, granite gneisses or augengneisses and mylonites. In this study, the quartz microfabrics of the undeformed granites are compared against the augengneisses and mylonites in a representative number of samples from several locations. In the undeformed granites, the fine-grained quartz aggregates that formed from coesite upon decompression are characterized by a foam structure and random crystallographic orientation. In the deformed granites, the quartz microstructures and the crystallographic preferred orientation (CPO) indicate deformation by dislocation creep. Most of the deformation of the granites (if not all) must have happened at a late stage during exhumation, after transformation of coesite to quartz, at greenschist facies conditions in the middle crust. The deformed granites provide no evidence of deformation during subduction, at (U)HP metamorphic conditions, and in the earlier stages of exhumation. The diameter of internally undeformed slices of continental crust subducted to and exhumed from about 100 km can exceed that of the presently exposed Brossasco granite, i.e. it can be on the kilometre scale.  相似文献   

20.
The present-day topography of the Italian peninsula results from the interactions between crustal-mantle and surface processes occurring since the Late Miocene. Analysis of exhumation and cooling of crustal rocks, together with Quaternary drainage evolution,helps to unravel the tectonic-morphologic evolution of the Apennines by distinguishing end-member models,and hence describing the orogenic belt evolution. The pattern of regional topography, erosional history and present-day distribution of active deformation suggests that the eastward migrating extensional-compressional paired deformation belts may still control the topogra-phy of the northern Apennines, albeit at slower rates than in the past. Conversely, Quaternary drainage evo-lution in the central and southern Apennines suggests that the topography of these regions underwent a Quaternary regional arching, which is only partly con-sistent with the persisting migration of the compres-sional-extensional pair.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号