首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
  相似文献   

2.
  相似文献   

3.
The Norilsk mining district is located at the northwest margin of the Tunguska basin, in the centre of the 3,000×4,000 km Siberian continental flood basalt (CFB) province. This CFB province was formed at the Permo-Triassic boundary from a superplume that ascended into the geometric centre of the Laurasian continent, which was surrounded by subducting slabs of oceanic crust. We suggest that these slabs could have reached the core–mantle boundary, and they may have controlled the geometric focus of the superplume. The resulting voluminous magma intruded and erupted in continental rifts and related extensive flood basalt events over a 2–4 Ma period. Cu–Ni–PGE sulfide mineralization is found in olivine-bearing differentiated mafic intrusions beneath the flood basalts at the northwestern margin of the Siberian craton and also in the Taimyr Peninsula, some 300 km east of a triple junction of continental rifts, now buried beneath the Mesozoic–Cenozoic sedimentary basin of western Siberia. The Norilsk-I and Talnakh-Oktyabrsky deposits occur in the Norilsk–Kharaelakh trough of the Tunguska CFB basin. The Cu–Ni–PGE-bearing mineralized intrusions are 2–3 km-wide and 20 km-long differentiated chonoliths. Previous studies suggested that parts of the magma remained in intermediate-level crustal chambers where sulfide saturation and accumulation took place before emplacement. The 5–7-km-thick Neoproterozoic to Palaeozoic country rocks, containing sedimentary Cu mineralization and evaporites, may have contributed additional metal and sulfur to this magma. Classic tectonomagmatic models for these deposits proposed that subvertical crustal faults, such as the northeast-trending Norilsk–Kharaelakh fault, were major trough-parallel conduits providing access for magmas to the final chambers. However, geological maps of the Norilsk region show that the Norilsk–Kharaelakh fault offsets the mineralization, which was deformed into folds and offset by related reverse faults, indicating compressional deformation after mineralization in the Late Triassic to Early Jurassic. In addition, most of the intrusions are sills, not dykes as should be expected if the vertical faults were major conduits. A revised tectonic model for the Norilsk region takes into account the fold structure and sill morphology of the dominant intrusions, indicating a lateral rather than vertical emplacement direction for the magma into final chambers. Taking into account the fold structure of the country rocks, the present distribution of the differentiated intrusions hosting the Norilsk-I and Talnakh–Oktyabrsky deposits may represent the remnants of a single, >60 km long, deformed and eroded palm-shaped cluster of mineralized intrusions, which are perceived as separate intrusions at the present erosional level. The original direction of sill emplacement may have been controlled by a northeast-trending paleo-rise, which we suggest is present at the southeastern border of the Norilsk–Kharaelakh trough based on analysis of the unconformity at the base of the CFB. The mineralized intrusions extend along this rise, which we interpret as a structure that formed above the extensionally tilted block in the metamorphic basement. Geophysical data indicate the presence of an intermediate magma chamber that could be linked with the Talnakh intrusion. In turn, this T-shaped flat chamber may link with the Yenisei–Khatanga rift along the northwest-trending Pyasina transform fault, which may have served as the principal magma conduit to the intermediate chamber. It then produced the differentiated mineralized intrusions that melted through the evaporites with in situ precipitation of massive, disseminated, and copper sulfide ore. The Norilsk–Kharaelakh crustal fault may not relate to mineralization and possibly formed in response to late Mesozoic spreading in the Arctic Ocean.Editorial handling: P. Lightfoot  相似文献   

4.
  相似文献   

5.
The Agnew–Wiluna greenstone belt in the Yilgarn Craton of Western Australia is the most nickel-sulfide-endowed komatiite belt in the world. The Agnew–Wiluna greenstone belt contains two mineralised units/horizons that display very different volcanological and geochemical features. The Mt Keith unit comprises >500 m-thick spinifex-free adcumulate-textured lenses, which are flanked by laterally extensive orthocumulate-textured units. Spinifex texture is absent from this unit. Disseminated nickel sulfides, interstitial to former olivine crystals, are concentrated in the lensoidal areas. Massive sulfides are locally present along the base or margins of the lenses or channels. The Cliffs unit is locally >150 m thick and comprises a sequence of differentiated spinifex-textured flow units. The basal unit is the thickest, and contains basal massive nickel-sulfide mineralisation. The Mt Keith and Cliffs units display important common features: (i) MgO contents of 25–30% in inferred parental magmas; and (ii) Al/Ti ratios of ～20 (Munro-type). However, the Mt Keith unit is highly crustally contaminated (e.g. LREE-enriched, high HFSEs), whereas the Cliffs unit does not display evidence of significant crustal assimilation. We argue that the distinct trace-element concentrations and profiles of the two komatiite units reflect their different emplacement style and country rocks: the Mt Keith unit is interpreted to have been emplaced as an intrusive sill into dacitic volcanic units whereas the Cliffs unit was extruded as lava flow onto tholeiitic basalts in a subaqueous environment. The mode of emplacement and nature of country rock is the single biggest factor in controlling mineralisation styles in komatiites. On the other hand, evidence of crustal contamination does not necessarily provide information of the prospectivity of komatiites to host Ni–Cu–(PGE) mineralisation, despite being a good proxy for the style of komatiite emplacement and the nature of country rocks.  相似文献   

6.
The Garson Ni–Cu–platinum group element deposit is a deformed, overturned, low Ni tenor contact-type deposit along the contact between the Sudbury Igneous Complex (SIC) and stratigraphically underlying rocks of the Huronian Supergroup in the South Range of the 1.85-Ga Sudbury structure. The ore bodies are coincident with steeply south-dipping, north-over-south D1 shear zones, which imbricated the SIC, its ore zones, and underlying Huronian rocks during mid-amphibolite facies metamorphism. The shear zones were reactivated as south-over-north, reverse shear zones during D2 at mid-greenschist facies metamorphism. Syn-D2 metamorphic titanite yields an age of 1,849?±?6 Ma, suggesting that D1 and D2 occurred immediately after crystallization of the SIC during the Penokean Orogeny. The ore bodies plunge steeply to the south parallel to colinear L1 and L2 mineral lineations, indicating that the geometry of the ore bodies are strongly controlled by D1 and D2. Sulfide mineralization consists of breccia ores, with minor disseminated sulfides hosted in norite, and syn-D2 quartz–calcite–sulfide veins. Mobilization by ductile plastic flow was the dominant mechanism of sulfide/metal mobilization during D1 and D2, with additional minor hydrothermal mobilization of Cu, Fe, and Ni by hydrothermal fluids during D2. Metamorphic pentlandite overgrows a S1 ferrotschermakite foliation in D1 deformed ore zones. Pentlandite was exsolved from recrystallized polygonal pyrrhotite grains after cessation of D1, which resulted in randomly distributed large pentlandite grains and randomly oriented pentlandite loops along the grain boundaries of polygonal pyrrhotite within the breccia ore. It also overgrows a S2 chlorite foliation in D2 shear zones. Pyrrhotite recrystallized and was flattened during D2 deformation of breccia ore along narrow shear zones. Exsolution of pentlandite loops along the grain boundaries of these flattened grains produced a pyrrhotite–pentlandite layering that is not observed in D1 deformed ore zones. The overprinting of the two foliations by pentlandite and exsolution of pentlandite along the grain boundaries of flattened pyrrhotite grains suggest that the Garson ores reverted to a metamorphic monosulfide solid solution at temperatures ranging between 550 and 600 °C during D1 and continued to deform as a monosulfide solid solution during D2.  相似文献   

7.
Analysis of magmatic and sedimentary rocks of several large igneous provinces has demonstrated that the release of gas during plutonic-metamorphic processes may be linked to global climate change and mass extinctions. Aguablanca, one of the largest Cu–Ni–PGE deposits in Europe, formed during the Variscan orogeny when a mafic magma intruded limestones and shales, creating a contact aureole composed of marble, skarn and hornfels. Our petrological and geochemical investigation of the aureole provides evidence that a combination of the two processes led to the formation of the ore deposit: The assimilation of terrigenous sediments supplied S to the magma while the assimilation of carbonates changed the oxygen fugacity and decreased the solubility of sulfur in the magma. The metamorphic assemblages in the contact aureole are directly related to heterogeneity of the protolith and particularly to the original proportions of calcite and clay. We modeled carbon dioxide degassing during contact metamorphism and showed that pure limestone is relatively unproductive because of its high reaction temperature. The presence of clay, however, leads to the formation of calc-silicates and significantly enhances CO2 degassing. Our estimations suggest that degassing of the Aguablanca contact aureole released about 74.8 Mt of CO2, a relatively low volume that we attribute to the composition of the host rock, mainly a pure limestone. A far larger volume of carbon dioxide was emitted by the contact metamorphism of dolostones in the contact aureole of Panzhihua (part of Emeishan large igneous province, SW China). We propose that the level of emission of carbon dioxide depends strongly on the nature of the protolith and has to be considered when predicting environmental impact during the emplacement of large igneous provinces.  相似文献   

8.
  相似文献   

9.
Magmatic PGE and Ni–Cu deposits form in contrasting geologic environments and periods. PGE deposits predominantly occur in large layered intrusions emplaced during the late Archean and early Proterozoic into stabilized, relatively S-poor cratonic lithosphere that provides enhanced preservation potential. The magmas ascend through intracratonic sutures where extension and rifting is limited. Crystallization under conditions of low regional stress, with limited magma-induced sagging due to underlying thick buoyant sub-continental mantle lithosphere, is consistent with their laterally continuous layering. Most of the global resources occur in three large intrusions: Bushveld, Great Dyke and Stillwater. Due to the large size (tens of kilometres) and limited complexity of the deposits, they are relatively easy to locate and delineate. As a result, the search space is relatively mature and few new discoveries have been made in the last few decades. The parental magmas to the intrusions are predominantly derived from the convecting mantle but, in addition, the involvement of the sub-continental lithospheric mantle is suggested by the relative Pt enrichment of most of the major deposits. In contrast to the PGE deposits, Ni–Cu deposits form throughout geologic time, but with the largest deposits being younger than ca. 2 Ga. The sulfide ores are concentrated under highly dynamic conditions within lava channels and magma conduits. The deposits are preferentially located near craton margins towards which mantle plumes have been channelled and where mantle magmas can readily ascend through abundant trans-lithospheric structures. Magma flow is focused and locally enhanced by shifting compressive–extensional tectonic regimes, and abundant S-rich crustal rocks provide an external S source that is required for the majority of deposits. The igneous bodies hosting the deposits tend to be irregular and small, tens to hundreds of metres in width and height, and are difficult to locate. As a result, the search space remains relatively immature. Understanding their tectonic setting helps reduce the prospective search space for world-class examples.  相似文献   

10.
中国PGE矿床类型分析   总被引：22，自引：6，他引：16  
中国PGE（铂族元素）矿床类型分析,PGE（铂族元素）矿床包括Pt,Pd,Rh,Ru,Os,Ir6种元素,它们有着很强的亲“S”性和亲“Fe”族元素性,同时和Mo,Te,As,Sb,Bi等元素也有亲缘关系。这些相关元素在不同介质中,组成不同的元素组合,叫做元素“序列”,共有7个序列,它们对PGE形成有选择性的萃取和捕获能力,叫“萃捕剂”,再加上PGE自身的地球化学差异性,就可能形成多种不同的PGE矿床类型。列举了6个矿床实例,提出了成矿五要素,分析了中国PGE矿床前景,认为成矿和地幔岩初始岩浆密切相关。  相似文献   

11.
Ore forming processes involve the redistribution of heat, mass and momentum by a wide range of processes operating at different time and length scales. The fastest process at any given length scale tends to be the dominant control. Applying this principle to the array of physical processes that operate within magma flow pathways leads to some key insights into the origins of magmatic Ni–Cu–PGE sulfide ore deposits. A high proportion of mineralised systems, including those in the super-giant Noril'sk-Talnakh camp, are formed in small conduit intrusions where assimilation of country rock has played a major role. Evidence of this process is reflected in the common association of sulfides with vari-textured contaminated host rocks containing xenoliths in varying stages of assimilation. Direct incorporation of S-bearing country rock xenoliths is likely to be the dominant mechanism for generating sulfide liquids in this setting. However, the processes of melting or dissolving these xenoliths is relatively slow compared with magma flow rates and, depending on xenolith lithology and the composition of the carrier magma, slow compared with settling and accumulation rates. Chemical equilibration between sulfide droplets and silicate magma is slower still, as is the process of dissolving sulfide liquid into initially undersaturated silicate magmas. Much of the transport and deposition of sulfide in the carrier magmas may occur while sulfide is still incorporated in the xenoliths, accounting for the common association of magmatic sulfide-matrix ore breccias and contaminated “taxitic” host rocks. Effective upgrading of so-formed sulfide liquids would require repetitive recycling by processes such as re-entrainment, back flow or gravity flow operating over the lifetime of the magma transport system as a whole. In contrast to mafic-hosted systems, komatiite-hosted ores only rarely show an association with externally-derived xenoliths, an observation which is partially due to the predominant formation of ores in lava flows rather than deep-seated intrusions, but also to the much shorter timescales of key component systems in hotter, less viscous magmas. Nonetheless, multiple cycles of deposition and entrainment are necessary to account for the metal contents of komatiite-hosted sulfides. More generally, the time and length scale approach introduced here may be of value in understanding other igneous processes as well as non-magmatic mineral systems.  相似文献   

12.
The Amy Lake PGE zone is a “low-sulfide-type” Cu-(Ni-)PGE mineralization in the East Range footwall of the 1.85 Ga Sudbury Igneous Complex occurring in a 100-m-wide Sudbury Breccia belt that coincides with an impact-related major fracture zone (Bay Fault zone). Detailed hydrothermal alteration mapping, fluid inclusion, trace element, and stable isotope studies revealed a complex alteration and mineralization history in a multi-source, multi-stage Sudbury-related hydrothermal system. The two major stages of syn-Sudbury hydrothermal activity are characterized by similarly high-salinity, high-temperature fluids that are (1) locally derived from footwall granophyre bodies, and typified with high Ni/Cu and PGE/S ratios and high REE contents (magmatic–hydrothermal stage), and (2) a more voluminous Cu–Ni–PGE-rich fluid flux probably originated from the Sudbury Igneous Complex/footwall contact (hydrothermal stage). The second hydrothermal flux was introduced by brittle fractures in the area and resulted in a complex zonation of alteration assemblages and mineralization governed by local footwall composition. The Sudbury-related hydrothermal event was overprinted by shear-related epidote veining and calcite–chlorite replacement, both regionally present in the Sudbury structure. Based on analogies, the most important factors involved in the formation of hydrothermal low-sulfide mineralization are proposed to be (1) accumulation of PGE-enriched fluids, (2) large-scale brittle structures as conduits to these fluids, and (3) adequate host rock composition as a chemical trap resulting in sulfide and PGM precipitation. In environments meeting these criteria, hydrothermal PGE mineralization is known to have formed not only in the Sudbury footwall but also from mafic–ultramafic intrusions associated with primary magmatic PGE from several locations around the world.  相似文献   

13.
The Ni–Cu–PGE sulfide deposits in the Yangliuping area, SW China, are hosted in mafic–ultramafic sills. The four mineralized sills are located in the Yangliuping tectonic dome and intrude Devonian carbonaceous marble, graphitic schist. The sills are 200–300 m thick and 1,000–2,000 m in strike length and now consist chiefly of serpentinite, talc schist, tremolite schist, and meta-gabbro. Disseminated Ni–Cu sulfide mineralisation occurs in the serpentinite in the lower parts of the sills. Massive sulfide mineralisation is located in the base of the sills and in the footwall along fractures beneath the mineralized serpentinite. Although the sulfide ores have been modified by hydrothermal activity, there are relict cumulate textures in the disseminated sulfides indicating a magmatic origin for the ores. The Yangliuping Intrusions and the Dashibao Formation have similar primitive-mantle normalized trace element and platinum group element (PGE) patterns, indicating that they are derived from a common parental magma type. The positive correlation between Cu concentrations and Cu/Zr ratios of the Dashibao Formation basalts indicates that the chalcophile elements were removed before eruption. We propose that fractional crystallization of the Yangliuping magma accompanied by the introduction of S and CO2 from the wall rocks caused the magma to become S-saturated leading to the segregation of magmatic sulfides that became enriched in Ni–Cu–(PGE). The sills acted as conduits for the overlying Dashibao Formation basalts with the sulfide liquid, along with early crystallizing olivine and pyroxene, segregating from the magma as it passed through the conduits prior to eruption.Editorial handling: H.E. Frimmel  相似文献   

14.
We studied a number of magmatic Ni–Cu–(PGE) sulfide deposits in two distinct belts in eastern Botswana. The Tati belt contains several relatively small deposits (up to 4.5 Mt of ore at 2.05% Ni and 0.85% Cu) at Phoenix, Selkirk and Tekwane. The deposits are hosted by ca 2.7 Ga, low- to medium-grade metamorphosed gabbroic–troctolitic intrusions situated within or at the periphery of a greenstone belt. The deposits of the Selebi-Phikwe belt are larger in size (up to 31 Mt of ore grade). They are hosted by high-grade metamorphosed gabbronorites, pyroxenites and peridotites believed to be older than ca 2.0 Ga that intruded gneisses of the Central Zone of the Limpopo metamorphic belt. The composition of the sulfide mineralisation in the two belts shows systematic variation. Most of the mineralisation in the Tati belt contains 2–9% Ni and 0.05–4% Cu (Cu/Cu + Ni = 0.4–0.7), whereas most of the mineralisation in the Selebi-Phikwe belt contains 1–3% Ni and 0.1–4% Cu (Cu/Cu + Ni = 0.4–0.9). The Cu–Ni tenors of the ores in both belts are consistent with crystallization from a basaltic magma. The Tati ores contain mostly >3 ppm Pt + Pd (Pt/Pd 0.1–1), with Pd/Ir = 100–1,000, indicative of a differentiated basaltic magma that remained S-undersaturated before emplacement. Most of the Selebi-Phikwe ores have <0.5 ppm Pt + Pd (Pt/Pd < 0.1–1), with Pd/Ir = 10–500. This suggests a relatively less differentiated magma that reached S saturation before emplacement. The Tati rocks show flat mantle-normalised incompatible trace element patterns (average Th/YbN = 1.57), except for strong enrichments in large ion lithophile elements (Cs, Rb, Ba, U, K). Such patterns are characteristic of relatively uncontaminated oceanic arc magmas and suggest that the Tati intrusions were emplaced in a destructive plate margin setting. Most of the Selebi-Phikwe rocks (notably Dikoloti) have more fractionated trace element signatures (average Th/YbN = 4.22), possibly indicating digestion of upper crustal material during magma emplacement. However, as there are also samples that have oceanic arc-like signatures, an alternative possibility is that the composition of most Selebi-Phikwe rocks reflects tectonic mingling of the intrusive rocks with the country rocks. The implication is that orogenic belts may have a higher prospectivity for magmatic Ni–Cu ores than presently recognised. The trigger mechanism for sulfide saturation and segregation in all intrusions remains unclear. Whereas the host rocks to the intrusions appear to be relatively sulfur poor, addition of crustal S to the magmas is suggested by low Se/S ratios in some of the ores (notably at Selebi-Phikwe). External S sources may thus remain unidentified due to poor exposure and/or S mobility in response to metamorphism.  相似文献   

15.
The Kangerlussuaq region of East Greenland hosts a variety of early Tertiary extrusive and intrusive igneous rocks related to continental break up and the passage of the ancestral Iceland plume. These intrusive bodies include a number of gabbroic macrodykes, two of which—the Miki Fjord Macrodyke, and the newly discovered Togeda Macrodyke—contain Cu–PGE–Au sulphide mineralisation along their margins. Sulphides occur as disseminated interstitial blebs and rounded globules of chalcopyrite and pyrrhotite with some Fe–Ti oxides and platinum-group minerals, comprising largely Pd bismuthides and tellurides. The globules are interpreted to have formed from fractionation of trapped droplets of an immiscible Cu- and Pd-rich sulphide melt and show geopetal indicators. Sulphur isotopes imply a local crustal source of S in these from pyritic sediments of the Kangerlussuaq Basin. Thus, generation of these sulphide occurrences was controlled by local country rock type. Low Ni/Cu and Pt/Pd ratios, also present in the Platinova reefs in the Skaergaard Intrusion, indicate that early fractionation of olivine may have depleted the magma of Ni and suggest the likely presence of a large magma chamber at depth. Xenoliths of Ni-rich olivine cumulates in the Miki Fjord Macrodyke may have been sourced from such a body. The location of thus far unidentified conduit or feeder zones to the macrodykes beneath the present day surface may represent potential targets for more massive sulphide orebodies.  相似文献   

16.
Concentrations of platinum group elements (PGE), Ag, As, Au, Bi, Cd, Co, Mo, Pb, Re, Sb, Se, Sn, Te, and Zn, have been determined in base metal sulfide (BMS) minerals from the western branch (402 Trough orebodies) of the Creighton Ni–Cu–PGE sulfide deposit, Sudbury, Canada. The sulfide assemblage is dominated by pyrrhotite, with minor pentlandite, chalcopyrite, and pyrite, and they represent monosulfide solid solution (MSS) cumulates. The aim of this study was to establish the distribution of the PGE among the BMS and platinum group minerals (PGM) in order to understand better the petrogenesis of the deposit. Mass balance calculations show that the BMS host all of the Co and Se, a significant proportion (40–90%) of Os, Pd, Ru, Cd, Sn, and Zn, but very little (<35%) of the Ag, Au, Bi, Ir, Mo, Pb, Pt, Rh, Re, Sb, and Te. Osmium and Ru are concentrated in equal proportions in pyrrhotite, pentlandite, and pyrite. Cobalt and Pd (∼1 ppm) are concentrated in pentlandite. Silver, Cd, Sn, Zn, and in rare cases Au and Te, are concentrated in chalcopyrite. Selenium is present in equal proportions in all three BMS. Iridium, Rh, and Pt are present in euhedrally zoned PGE sulfarsenides, which comprise irarsite (IrAsS), hollingworthite (RhAsS), PGE-Ni-rich cobaltite (CoAsS), and subordinate sperrylite (PtAs2), all of which are hosted predominantly in pyrrhotite and pentlandite. Silver, Au, Bi, Mo, Pb, Re, Sb, and Te are found predominantly in discrete accessory minerals such as electrum (Au–Ag alloy), hessite (Ag2Te), michenerite (PdBiTe), and rhenium sulfides. The enrichment of Os, Ru, Ni, and Co in pyrrhotite, pentlandite, and pyrite and Ag, Au, Cd, Sn, Te, and Zn in chalcopyrite can be explained by fractional crystallization of MSS from a sulfide liquid followed by exsolution of the sulfides. The early crystallization of the PGE sulfarsenides from the sulfide melt depleted the MSS in Ir and Rh. The bulk of Pd in pentlandite cannot be explained by sulfide fractionation alone because Pd should have partitioned into the residual Cu-rich liquid and be in chalcopyrite or in PGM around chalcopyrite. The variation of Pd among different pentlandite textures provides evidence that Pd diffuses into pentlandite during its exsolution from MSS. The source of Pd was from the small quantity of Pd that partitioned originally into the MSS and a larger quantity of Pd in the nearby Cu-rich portion (intermediate solid solution and/or Pd-bearing PGM). The source of Pd became depleted during the diffusion process, thus later-forming pentlandite (rims of coarse-granular, veinlets, and exsolution flames) contains less Pd than early-forming pentlandite (cores of coarse-granular).  相似文献   

17.
Total organic carbon content (TOC), trace element and platinum-group element (PGE) concentrations were determined in the black shales of the Lower Cambrian Niutitang Formation in the Nayong area, Guizhou Province, South China, in order to study the polymetallic Ni–Mo–PGE mineralization. The results demonstrate that numerous elements are enriched in the polymetallic ores compared to those of the nearby black shale, particularly Ni, Mo, Zn, TOC and total PGE, which can reach up to 7.03 wt.%, 8.49 wt.%, 11.7 wt.%, 11.5 wt.% and 943 ppb, respectively. The elemental enrichment distribution patterns are similar to those in the Zunyi and Zhangjiajie areas except that the Nayong location is exceptionally enriched in Zn. Whereas positive correlations are observed between the ore elements of the polymetallic ores, no such correlations are observed in the black shale. These positively correlated metallic elements are classified into three groups: Co–Ni–Cu–PGE, Zn–Cd–Pb and Mo–Tl–TOC. The geological and geochemical features of these elements suggest that Proterozoic and Early Palaeozoic mafic and ultramafic rocks, dolomites and/or Pb–Zn deposits of the Neoproterozoic Dengying Formation and seawater could be the principal sources for Co–Ni–Cu–PGE, Zn–Cd–Pb, and Mo–Tl–TOC, respectively. Furthermore, the chondrite-normalized patterns of PGEs with Pd/Pt, Pd/Ir and Pt/Ir indicate that PGE enrichment of the polymetallic ores is most likely related to hydrothermal processes associated with the mafic rocks. In contrast, PGE enrichment in the black shale resembles that of the marine oil shale with terrigenous and seawater contributions. Our investigations of TOC, trace elements and PGE geochemistry suggest that multiple sources along with submarine hydrothermal and biological contributions might be responsible for the formation of the polymetallic Ni–Mo–PGE mineralization in the black shales of the Lower Cambrian Niutitang Formation across southern China.  相似文献   

18.
Spinel lherzolite and wehrlite xenoliths from the Cenozoic Calatrava volcanic field carry the geochemical imprint of metasomatic agents that have affected the subcontinental lithospheric mantle beneath Central Iberia. Some xenoliths (mainly wehrlites) were enriched in REE, Sr, P, and CO2 by silicic-carbonate-rich metasomatic melts/fluids, while others record the effects of subduction-related hydrous silicate fluids that have precipitated amphibole and induced high Ti/Eu in primary clinopyroxene. The petrographic observations and geochemical data suggest that interstitial glass in the xenoliths represent the quenched products of Si-rich melts that infiltrated the mantle peridotite shortly before the entrainment of the xenoliths in the host magmas that erupted ca 2 million years ago. During their infiltration, the metasomatic melts reacted with peridotite, resulting in silica enrichment, while remobilizing grains of iron-rich monosulfide solid solution (Fe-rich Mss) initially enclosed in, or intergranular to, primary olivine and pyroxenes. In situ laser ablation inductively coupled plasma-mass spectrometry analysis of single sulfide grains reveals that the Fe-rich Mss in glass shows platinum-group element (PGE) patterns and 187Os/188Os compositions identical to the Fe-rich Mss occurring as inclusions in, or at grain boundaries of primary silicates. Moreover, independent of its microstructural position, Fe-rich Mss exhibits PGE and 187Os/188Os signatures typical of Mss either residual after partial melting or crystallized directly from sulfide melts. Our findings reveal that young metasomatic melt(s)/fluid(s) may carry remobilized sulfides with PGE and Os-isotopic signatures identical to those of texturally older sulfides in the peridotite xenolith. These sulfides thus still provide useful information about the timing and nature of older magmatic events in the subcontinental mantle.  相似文献   

19.
The Wengeqi complex in Guyang County, Inner Mongolia, is one of several Pd–Pt-mineralized Paleozoic mafic–ultramafic complexes along the north-central margin of the North China. The complex comprises pyroxenites, biotite pyroxenites, amphibole pyroxenites, gabbros, and amphibolites. Zircons extracted from a pyroxenite yield a U–Pb SHRIMP age of 399?±?4?Ma. Several 2–6-m wide syngenetic websterite dikes contain 1–3?ppm Pd?+?Pd and are dominated by pyrite–chalcopyrite–pyrrhotite–magnetite–(pentlandite) assemblages with minor sperrylite, sudburyite, and kotuskite. Textural relationships indicate that pyrite has replaced magmatic chalcopyrite and that magnetite has replaced magmatic pyrrhotite. The mineralization is enriched in Pd–Pt–Cu > Au >> Rh–Ir–Os–Ni > Ru, similar to other occurrences of hydrothermally modified magmatic mineralization, but very different from the much less fractionated compositions of magmatic PGE mineralization. Textural, mineralogical, and geochemical relationships are consistent with alteration of an original magmatic Fe–Ni–Cu sulfide assemblage by a S-rich oxidizing high-temperature (deuteric) hydrothermal fluid.  相似文献   

20.
In the Neoarchean (~ 2.7 Ga) contact metamorphosed charnockitic footwall of the Mesoproterosoic (1.1 Ga) South Kawishiwi intrusion of the Duluth Complex, the primary metamorphic mineral assemblage and Cu–Ni–PGE sulfide mineralization is overprinted by an actinolite + chlorite + cummingtonite + prehnite + pumpellyite + quartz + calcite hydrothermal mineral assemblage along 2–3 cm thick veins. In calcite, hosted by the hydrothermal alteration zones and in a single recrystallized quartz porphyroblast, four different fluid inclusion assemblages are documented; the composition of these fluid inclusions provide p–T conditions of the fluid flow, and helps to define the origin of the fluids and evaluate their role in the remobilization and reprecipitation of the primary metamorphic sulfide assemblage.Pure CO2 fluid inclusions were found as early inclusions in recrystallized quartz porphyroblast. These inclusions may have been trapped during the recrystallization of the quartz during the contact metamorphism of the footwall charnockite in the footwall of the SKI. The estimated trapping pressure (1.6–2.0 kbar) and temperature (810–920 °C) conditions correspond to estimates based on felsic veins in the basal zones of the South Kawishiwi intrusion.Fluid inclusion assemblages with CO2–H2O–NaCl and CH4–N2–H2O–NaCl compositions found in this study along healed microfractures in the recrystallized quartz porphyroblast establish the heterogeneous state of the fluids during entrapment. The estimated trapping pressure and temperature conditions (240–650 bar and 120–150 °C for CO2–H2O–NaCl inclusions and 315–360 bar and 145–165 °C for CH4–N2–H2O–NaCl inclusions) are significantly lower than the p–T conditions (> 700 °C and 1.6–2 kbar) during the contact metamorphism, indicating that this fluid flow might not be related to the cooling of the Duluth Complex and its contact aureole. The presence of chalcopyrite inclusions in these fluid inclusions and in the trails of these fluid inclusion assemblages confirms that at least on local scale these fluids played a role in base metal remobilization. No evidences have been observed for PGE remobilization and transport in the samples. The source of the carbonic phase in the carbonic assemblages (CO2; CH4) could be the graphite, present in the metasedimentary hornfelsed inclusions in the basal zones of the South Kawishiwi intrusion.The hydrothermal veins in the charnockite can be characterized by an actinolite + cummingtonite + chlorite + prehnite + pumpellyite + calcite (I–II) + quartz mineral assemblage. Chlorite thermometry yields temperatures around 276–308 °C during the earliest phase of the fluid flow. In the late calcite (II) phase, high salinity (21.6–28.8 NaCl + CaCl2 equiv. wt.%), low temperature (90–160 °C), primary aqueous inclusions were found. Chalcopyrite (± sphalerite ± millerite), replacing and intersecting the early hydrothermal phases, are associated to the late calcite (II) phase. The composition of the formational fluids in the Canadian Shield is comparable with the composition of the studied fluid inclusions. This suggests that the composition of the fluids did not change in the past 2 Ga and base metal remobilization by formational fluids could have taken place any time after the formation of the South Kawishiwi intrusion.Sulfur isotope studies carried out on the primary metamorphic (δ34S = 7.4–8.9‰) and the hydrothermal sulfide mineral assemblage (δ34S = 5.5–5.7‰) proves, that during the hydrothermal fluid flow the primary metamorphic ores were remobilized.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号