共查询到20条相似文献，搜索用时 468 毫秒
1.
Bias-corrected rational polynomial coefficients for high accuracy geo-positioning of QuickBird stereo imagery 总被引：1，自引：0，他引：1
Xiaohua Tong Shijie Liu Qihao Weng 《ISPRS Journal of Photogrammetry and Remote Sensing》2010,65(2):218-226
The rational function model (RFM) is widely used as an alternative to physical sensor models for 3D ground point determination with high-resolution satellite imagery (HRSI). However, owing to the sensor orientation bias inherent in the vendor-provided rational polynomial coefficients (RPCs), the geo-positioning accuracy obtained from these RPCs is limited. In this paper, the performances of two schemes for orientation bias correction (i.e., RPCs modification and RPCs regeneration) is presented based on one separate-orbit QuickBird stereo image pair in Shanghai, and four cases for bias correction, including shift bias correction, shift and drift bias correction, affine model bias correction and second-order polynomial bias correction, are examined. A 2-step least squares adjustment method is adopted for correction parameter estimation with a comparison with the RPC bundle adjustment method. The experiment results demonstrate that in general the accuracy of the 2-step least squares adjustment method is almost identical to that of the RPC bundle adjustment method. With the shift bias correction method and minimal 1 ground control point (GCP), the modified RPCs improve the accuracy from the original 23 m to 3 m in planimetry and 17 m to 4 m in height. With the shift and drift bias correction method, the regenerated RPCs achieve a further improved positioning accuracy of 0.6 m in planimetry and 1 m in height with minimal 2 well-distributed GCPs. The affine model bias correction yields a geo-positioning accuracy of better than 0.5 m in planimetry and 1 m in height with 3 well-positioned GCPs. Further tests with the second-order polynomial bias correction model indicate the existence of potential high-order error signals in the vendor-provided RPCs, and on condition that an adequate redundancy in GCP number is available, an accuracy of 0.4 m in planimetry and 0.8 m in height is attainable. 相似文献
2.
Accuracy assessment of QuickBird stereo imagery 总被引：2，自引：0，他引：2
Mayumi Noguchi Clive S. Fraser Takayuki Nakamura Takahiro Shimono Shoichi Oki 《The Photogrammetric Record》2004,19(106):128-137
The Geographical Survey Institute of Japan has recently carried out an evaluation of the metric performance of QuickBird stereo satellite imagery. This paper describes the accuracy assessment of the sensor orientation and geopositioning phases of the study, the aim of which was twofold. First, it was desired to confirm the metric potential of QuickBird imagery for 1:25 000 scale topographic mapping. Second, a determination was to be made of the accuracy attainable from the Basic image product. The techniques of rational functions and affine bundle adjustment were employed, the former with bias compensation. The results obtained both reassert the high precision of the rational functions approach and cast doubt upon the applicability of the 3D affine model for accurate geopositioning from QuickBird imagery. 相似文献
3.
SHIWenzhong AhmedShaker 《地球空间信息科学学报》2004,7(1):24-30
The exploitation of different non-rigorous mathematical models as opposed to the satellite rigorous models is discussed for geometric corrections and topographic/thematic maps production of high-resolution satellite imagery (HRSI). Furthermore, this paper focuses on the effects of the number of GCPs and the terrain elevation difference within the area covered by the images on the obtained ground points accuracy. From the research, it is obviously found that non-rigorous orientation and triangulation models can be used successfully in most cases for 2D rectification and 3D ground points determination without a camera model or the satellite ephemeris data. In addition, the accuracy up to the sub-pixel level in plane and about one pixel in elevation can be achieved with a modest number of GCPs. 相似文献
4.
以"像方观测直线与像方预测直线必须重合"作为几何约束条件,以有理函数模型(RFM)作为高分辨率卫星影像的几何处理模型,提出了一种直线特征约束的高分辨率卫星影像区域网平差方法。本文方法仅需像方直线与物方直线相对应,无须像方直线上的像点与物方直线上的地面点一一对应。通过对圣迭戈试验区的两景IKONOS影像、斯波坎试验区的两景QuickBird影像和普罗旺斯试验区的两景SPOT-5影像进行试验,结果表明:本文方法可以充分利用直线特征作为控制条件,有效补偿RPC参数中的系统误差,获得的IKONOS、QuickBird和SPOT-5影像区域网平差的平面与高程精度均优于1个像素。 相似文献
5.
Saeid Sadeghian Mohammad Javad Valadan Zoej Mahmoud Reza Delavar Ahmad Abootalebi 《International Journal of Applied Earth Observation and Geoinformation》2001,3(4):366
The huge capability of high resolution satellite imageries (HRSI), that includes spatial, spectral, temporal and radiometric resolutions as well as stereoscopic vision introduces them as a powerful new source for the Photogrammetry, Remote Sensing and GIS communities. High resolution data increases the need for higher accuracy of data modeling. The satellite orbit, position, attitude angles and interior orientation parameters have to be adjusted in the geometrical model to achieve optimal accuracy with the use of a minimum number of Ground Control Points (GCPs). But most high resolution satellite vendors do not intend to publish their sensor models and ephemeris data. There is consequently a need for a range of alternative, practical approaches for extracting accurate 2D and 3D terrain information from HRSI. The flexibility and good accuracy of the alternative models demonstrated with KFA-1000 and the well-known SPOT level 1A images. A block of eight KFA-1000 space photos in two strips with 60% longitudinal overlap and 15% lateral sidelap and SPOT image with rational function, DLT, 2D projective, polynomials, affine, conformal, multiquadric and finite element methods were used in the test. The test areas cover parts of South and West of Iran. Considering the quality of GCPs, the best result was found with the DLT method with a RMSE of 8.44 m for the KFA-1000 space photos. 相似文献
6.
As a model for sensor orientation and 3D geopositioning for high-resolution satellite imagery (HRSI), the affine transformation from object to image space has obvious advantages. Chief among these is that it is a straightforward linear model, comprising only eight parameters, which has been shown to yield sub-pixel geopositioning accuracy when applied to Ikonos stereo imagery. This paper aims to provide further insight into the affine model in order to understand why it performs as well as it does. Initially, the model is compared to counterpart, ‘rigorous’ affine transformation formulations which account for the conversion from a central perspective to affine image. Examination of these rigorous models sheds light on issues such as the effects of terrain and size of area, as well as upon the choice of reference coordinate system and the impact of the adopted scanning mode of the sensor. The results of application of the affine sensor orientation model to four multi-image Ikonos test field configurations are then presented. These illustrate the very high geopositioning accuracy attainable with the affine model, and illustrate that the model is not affected by size of area, but can be influenced to a modest extent by mountainous terrain, the mode of scanning and the choice of object space coordinate system. Above all, the affine model is shown to be both a robust and practical sensor orientation/triangulation model with high metric potential. 相似文献
7.
Maria Antonia Brovelli Mattia Crespi Francesca Fratarcangeli Francesca Giannone Eugenio Realini 《ISPRS Journal of Photogrammetry and Remote Sensing》2008,63(4):427-440
Interest in high-resolution satellite imagery (HRSI) is spreading in several application fields, at both scientific and commercial levels. Fundamental and critical goals for the geometric use of this kind of imagery are their orientation and orthorectification, processes able to georeference the imagery and correct the geometric deformations they undergo during acquisition. In order to exploit the actual potentialities of orthorectified imagery in Geomatics applications, the definition of a methodology to assess the spatial accuracy achievable from oriented imagery is a crucial topic.In this paper we want to propose a new method for accuracy assessment based on the Leave-One-Out Cross-Validation (LOOCV), a model validation method already applied in different fields such as machine learning, bioinformatics and generally in any other field requiring an evaluation of the performance of a learning algorithm (e.g. in geostatistics), but never applied to HRSI orientation accuracy assessment.The proposed method exhibits interesting features which are able to overcome the most remarkable drawbacks involved by the commonly used method (Hold-Out Validation — HOV), based on the partitioning of the known ground points in two sets: the first is used in the orientation–orthorectification model (GCPs — Ground Control Points) and the second is used to validate the model itself (CPs — Check Points). In fact the HOV is generally not reliable and it is not applicable when a low number of ground points is available.To test the proposed method we implemented a new routine that performs the LOOCV in the software SISAR, developed by the Geodesy and Geomatics Team at the Sapienza University of Rome to perform the rigorous orientation of HRSI; this routine was tested on some EROS-A and QuickBird images. Moreover, these images were also oriented using the world recognized commercial software OrthoEngine v. 10 (included in the Geomatica suite by PCI), manually performing the LOOCV since only the HOV is implemented.The software comparison guaranteed about the overall correctness and good performances of the SISAR model, whereas the results showed the good features of the LOOCV method. 相似文献
8.
针对海岛礁卫星影像的定位问题，提出一种利用航天飞机雷达地形测绘任务（shuttle radar topography mission，SRTM）DEM辅助的无地面控制点定位方法。该方法分为概略定位和精定位两个阶段，各阶段均包括DEM提取和DEM匹配等主要步骤，可分别对影像中的相对误差和绝对误差进行补偿。SRTM DEM被充分应用到方法各环节中，以发挥其高精度的特性:提取DEM时既用于剔除海域点，也用于确定求解陆域点高程时的高程搜索范围，从而避免海域影像的不利影响，同时保证计算效率；DEM匹配时其作为基准数据。利用多景天绘一号卫星海岛礁地区的立体影像进行验证。实验结果表明，所提出的方法对具有不同陆域比例、不同生产方式的天绘一号海岛礁影像均能得到较稳定且较高的定位精度，平面和高程精度分别优于6.2 m、5.2 m，能较好地满足1:50 000比例尺地形图的精度要求。定位精度基本不受待匹配DEM分辨率的影响，计算效率取决于陆域比例和待匹配DEM的分辨率。 相似文献
9.
Hüseyin Topan 《Journal of the Indian Society of Remote Sensing》2013,41(4):807-818
Georeferencing of high resolution satellite images using sensor-dependent Rational Function Model (RFM) is a common approach in the remote sensing community since the turn of the millennium. In the case of mono image evaluation, the georeferencing is performed using the ground control points (GCPs), and the image-wide georeferencing accuracy is estimated at the independent check points (ICPs). Nevertheless, such an accuracy assessment approach has some disadvantages and must be overcomed by a proper method as suggested by the figure condition analysis (FCA). Considering various bias compensation methods, the FCA is adopted to RFM and a case study is performed on three high resolution satellite images (HRSIs), IKONOS Geo, QuickBird OrthoReady Standard and OrbView-3 Basic, covering undulating and mountainous Zonguldak test site. The results demonstrate that a bias compensation is required for all images, and IKONOS has the highest accuracy both at GCPs and figure condition points (FCPs) where OrbView-3 has the lowest accuracy. The innovative characteristics of FCA and further research issues are also discussed. 相似文献
10.
仅用虚拟控制点的超大区域无控制区域网平差 总被引：2，自引：1，他引：1
利用光学卫星影像进行无控制测图是摄影测量追求的目标。针对超大区域无控制测图的需求,本文提出了一种以单景影像为平差单元,基于虚拟控制点的光学卫星影像超大规模无控制区域网平差方法。该方法利用待平差影像的初始RPC模型生成虚拟控制点,并将其作为带权观测值引入平差模型中以改善平差模型的状态,克服了在无控制点条件下平差精度不稳定、误差过度累积引起的网的扭曲变形等问题。为了验证本方法的有效性和精度,利用资源三号卫星获取的覆盖全国的26 406景影像进行区域网平差试验,并利用全国范围内分布的约8000个高精度控制点对平差后自动生产的DOM和DSM产品的几何精度进行验证。试验结果表明,平面和高程中误差均达到了4m以内,同时,区域网内部相邻影像之间的几何拼接精度优于1个像素,满足无缝拼接的要求。 相似文献
11.
ABSTRACT In this paper, we propose a method to regenerate Rational Polynomial Coefficients (RPCs) using KOMPSAT-3A imagery and to reduce the geolocation error using minimum ground control points (GCPs). To estimate the new RPCs, the physical sensor model fitted to KOMPSAT-3A imagery was utilized and virtual GCPs over the study area were created. The size of the virtual grid used was 20x20x20. To remove the sensor-related errors in physical sensor model, three different image correction models (image coordinate translation model, shift and drift model, and affine transformation model) were additionally applied. We evaluated our proposed method in two areas within Korea, one in urban (Seoul) and one in rural (Goheung) areas. The results showed that there was a significant improvement after applying the suggested approach in the two areas. The image coordinate translation model is suggested in terms of GCP requirement and expected errors estimated from the error propagation analysis using Gauss–Markov Model (GMM). 相似文献
12.
ICESat激光高程点辅助的天绘一号卫星影像立体区域网平差 总被引：1，自引：1，他引：0
无地面控制点（简称无控）区域网平差是实现卫星影像无控测图的一项重要技术,对于境外和外业测控困难区域的测图具有重要意义。然而,无控区域网平差的定位精度一般难以满足对应比例尺测图规范要求。利用公开、可稳定获取的公众地理信息数据辅助区域网平差,是提高卫星影像无控定位精度的有效途径,其中ICESat激光高程点便是一种良好的高程控制数据。为了提高天绘一号卫星影像无控定位精度,本文提出ICESat激光高程点辅助的卫星影像模型法立体区域网平差方法。首先,以30 m分辨率SRTM估算的地形坡度作为限制条件,结合激光高程点自身质量评价信息,自动提取高质量ICESat激光高程点;其次,利用自动匹配的连接点进行模型法自由网平差,实现卫星影像几何定位精度的相对一致性（内部一致性）;最后,将激光高程点自动量测至卫星影像作为控制点,其平面坐标根据自由网平差结果前方交会计算而得,高程坐标取自激光点高程,再次进行区域网平差精化定向参数,提高卫星影像的绝对高程精度。最后本文利用山东全省的天绘一号卫星影像进行试验,验证了本文方法的有效性和可行性。 相似文献
13.
14.
卫星影像的RFM模型具有传感器无关的优点,适用于多源影像的几何定位处理,但在无地面控制点条件下联合定位时存在自主定位优势影像难以发挥主导作用且求解易发散的不足。本文通过将影像的先验自主定位精度和成像线性漂移转化为像方定向参数的精度和权信息,建立考虑影像定向参数精度信息的RFM模型。以12景TerraSAR-X和6对12景覆盖面积约为18万km2的SPOT-5HRS立体长条带影像为数据源,对两类影像定向参数先验精度配置偏差、SAR影像升降轨道方向、SAR影像数目、SAR影像分布等因素对定位精度的影响进行了系列定位试验,少量SAR与大范围HRS联合的影像自主定位平面/高程精度可达6.0m/4.2m。本文RFM平差模型无地面控制点定位精度和定向参数求解稳健性相对于传统模型有显著提升,是卫星影像无控制点1∶10万/1∶5万全球测图的一种潜在方法。 相似文献
15.
《International Journal of Digital Earth》2013,6(10):1055-1069
ABSTRACTWhile impressive direct geolocation accuracies better than 5.0?m CE90 (90% of circular error) can be achieved from the last DigitalGlobe’s Very High Resolution (VHR) satellites (i.e. GeoEye-1 and WorldView-1/2/3/4), it is insufficient for many precise geodetic applications. For these sensors, the best horizontal geopositioning accuracies (around 0.55?m CE90) can be attained by using third-order 3D rational functions with vendor’s rational polynomial coefficients data refined by a zero-order polynomial adjustment obtained from a small number of very accurate ground control points (GCPs). However, these high-quality GCPs are not always available. In this work, two different approaches for improving the initial direct geolocation accuracy of VHR satellite imagery are proposed. Both of them are based on the extraction of three-dimensional GCPs from freely available ancillary data at global coverage such as multi-temporal information of Google Earth and the Shuttle Radar Topography Mission 30?m digital elevation model. The application of these approaches on WorldView-2 and GeoEye-1 stereo pairs over two different study sites proved to improve the horizontal direct geolocation accuracy values around of 75%. 相似文献
16.
考虑到同轨道拍摄的长条带卫星影像具有相同的误差分布特性,针对资源三号的标准景影像产品,提出了基于轨道约束的卫星影像区域网平差方法。首先,根据同轨相邻影像的偏移量计算轨道影像坐标系下的像点坐标;其次,通过同轨每景影像的RFM重新生成轨道影像的RFM,同时生成补偿格网;然后,根据基于像方仿射变换的RFM对轨道影像进行区域网平差;最后,利用求得的轨道影像的仿射变换参数重新计算原始单景影像的仿射变换参数。利用不同地区资源三号测绘卫星影像数据的试验表明,基于轨道约束的卫星影像区域网平差（以下简称轨道平差）在稀疏控制条件下,其精度明显好于单景影像平差的精度。在6控情况下,太行山试验区达到平面2.504m高程3.117m,在渭南试验区达到了平面4.061m高程2.895m。试验结果证明了轨道平差的有效性和可行性。 相似文献
17.
Manthira Moorthi Subbiah Debajyoti Dhar Sivakumar Ramamoorthy 《Journal of the Indian Society of Remote Sensing》2018,46(9):1527-1535
An automatic image registration approach is presented here can be used to register daily images of Indian geostationary satellite system INSAT-3D acquired every 30 min’ interval without use of any ground control points (GCPs). There is always a pressing need to register meteorological images that are acquired over earth from geostationary platforms every 15–30 min, covering almost one-third of the earth. Weather forecast activities include derivation of atmospheric motion vectors, which demand immediate processing of such images to a reasonable accuracy in terms of its relative location accuracy. Generally followed approaches make use of image navigation models and GCPs drawn from known landmarks in land ocean boundaries and correlate image features before estimating a transform to warp the current acquisition to a known geometry. However, the hierarchical (coarse to fine) approach explained here makes use of intensity based Mutual Information as a similarity measure from a population of pixels selected randomly and uses stochastic gradient descent optimizer to estimate an affine transform between registering image pair, delivers satisfactory results. 相似文献
18.
Joanne Poon Clive S. Fraser Zhang Chunsun Zhang Li Armin Gruen 《The Photogrammetric Record》2005,20(110):162-171
The growing applications of digital surface models (DSMs) for object detection, segmentation and representation of terrestrial landscapes have provided impetus for further automation of 3D spatial information extraction processes. While new technologies such as lidar are available for almost instant DSM generation, the use of stereoscopic high-resolution satellite imagery (HRSI), coupled with image matching, affords cost-effective measurement of surface topography over large coverage areas. This investigation explores the potential of IKONOS Geo stereo imagery for producing DSMs using an alternative sensor orientation model, namely bias-corrected rational polynomial coefficients (RPCs), and a hybrid image-matching algorithm. To serve both as a reference surface and a basis for comparison, a lidar DSM was employed in the Hobart testfield, a region of differing terrain types and slope. In order to take topographic variation within the modelled surface into account, the lidar strip was divided into separate sub-areas representing differing land cover types. It is shown that over topographically diverse areas, heighting accuracy to better than 3 pixels can be readily achieved. Results improve markedly in feature-rich open and relatively flat terrain, with sub-pixel accuracy being achieved at check points surveyed using the global positioning system (GPS). This assessment demonstrates that the outlook for DSM generation from HRSI is very promising. 相似文献
19.
CBERS-02B卫星遥感影像的区域网平差 总被引：2，自引：1，他引：1
针对中巴资源一号卫星(CBERS-02B)卫星遥感影像姿态角误差较大的特点,提出了利用区域网平差方法提高其对地目标定位精度的策略和具体计算过程。首先对参与平差的每景影像选取4个地面控制点进行影像姿态角常差检校,然后采用与地形无关方案解求各自的RPC参数,最后选取带仿射变换项的有理函数模型(RFM)进行多重覆盖影像的区域网平差。对两个地区的0级CBERS-02B单条CCD立体影像对的区域网平差试验表明,对地目标定位的平面和高程精度均达到了±3个像元的水平,且高程精度明显优于平面精度。相对于常规的卫星遥感影像区域网平差方法,平面和高程精度均有明显提升,几乎达到国外同等高分辨率卫星遥感影像的几何定位精度。这说明中国卫星遥感影像亦具有较好的几何定位潜力,在区域网平差之前进行系统误差预改正是必要和可行的。 相似文献
20.
稀少控制的多平台星载SAR联合几何定标方法 总被引：3，自引：3，他引：0
几何定标采用地面控制点获取距离-多普勒模型中的精确几何参数,用于完成星载SAR影像高精度几何定位。但在广域范围内,特别是高山地区域,控制点极难获取。此外,传统定标方法仅面向单一平台SAR影像,尚不能实现多平台影像的联合几何定标。针对上述问题,本文提出一种基于稀少控制的多平台星载SAR联合几何定标方法。该方法从包含实测控制点的主影像出发,使用点位追踪算法获取主影像与从影像之间的连接点,并以连接点为桥梁逐级完成从影像的几何定标。本文采用京津冀地区南北向分布共计235 km的3景TerraSAR-X、3景TanDEM-X、5景高分三号影像进行联合几何定标试验,仅使用5个控制点即完成了所有影像的几何定标,并利用SF-3050星站差分GNSS接收机采集实测GPS点进行精度评价。结果表明使用稀少控制点定标后的TSX/TDX影像的几何定位精度优于3 m,GF-3影像的几何定位精度优于7.5 m,验证了该方法的有效性和正确性。 相似文献