共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
There are two main challenges when it comes to classifying airborne laser scanning (ALS) data. The first challenge is to find suitable attributes to distinguish classes of interest. The second is to define proper entities to calculate the attributes. In most cases, efforts are made to find suitable attributes and less attention is paid to defining an entity. It is our hypothesis that, with the same defined attributes and classifier, accuracy will improve if multiple entities are used for classification. To verify this hypothesis, we propose a multiple-entity based classification method to classify seven classes: ground, water, vegetation, roof, wall, roof element, and undefined object. We also compared the performance of the multiple-entity based method to the single-entity based method.Features have been extracted, in most previous work, from a single entity in ALS data; either from a point or from grouped points. In our method, we extract features from three different entities: points, planar segments, and segments derived by mean shift. Features extracted from these entities are inputted into a four-step classification strategy. After ALS data are filtered into ground and non-ground points. Features generalised from planar segments are used to classify points into the following: water, ground, roof, vegetation, and undefined objects. This is followed by point-wise identification of the walls and roof elements using the contextual information of a building. During the contextual reasoning, the portion of the vegetation extending above the roofs is classified as a roof element. This portion of points is eventually re-segmented by the mean shift method and then reclassified.Five supervised classifiers are applied to classify the features extracted from planar segments and mean shift segments. The experiments demonstrate that a multiple-entity strategy achieves slightly higher overall accuracy and achieves much higher accuracy for vegetation, in comparison to the single-entity strategy (using only point features and planar segment features). Although the multiple-entity method obtains nearly the same overall accuracy as the planar-segment method, the accuracy of vegetation improves by 3.3% with the rule-based classifier. The multiple-entity method obtains much higher overall accuracy and higher accuracy in vegetation in comparison to using only the point-wise classification method for all five classifiers.Meanwhile, we compared the performances of five classifiers. The rule-based method provides the highest overall accuracy at 97.0%. The rule-based method provides over 99.0% accuracy for the ground and roof classes, and a minimum accuracy of 90.0% for the water, vegetation, wall and undefined object classes. Notably, the accuracy of the roof element class is only 70% with the rule-based method, or even lower with other classifiers. Most roof elements have been assigned to the roof class, as shown in the confusion matrix. These erroneous assignments are not fatal errors because both a roof and a roof element are part of a building. In addition, a new feature which indicates the average point space within the planar segment is generalised to distinguish vegetation from other classes. Its performance is compared to the percentage of points with multiple pulse count in planar segments. Using the feature computed with only average point space, the detection rate of vegetation in a rule-based classifier is 85.5%, which is 6% lower than that with pulse count information. 相似文献
3.
机载多光谱LiDAR系统能够快速、准确地获取地物的空间几何和光谱信息,为地物覆盖分类和目标识别提供新的数据源。近年来,基于三维点云的深度学习算法取得了一系列突破性进展,然而直接将不规则的原始点云数据输入深度学习模型进行基于点的分类存在一定的困难。本文提出了一种基于FPS-KNN的样本生成方法,用于基于深度学习的机载多光谱LiDAR数据分类。该方法首先对输入数据进行归一化处理;然后利用最远点采样方法(FPS)和K近邻法(KNN)在输入数据中生成一系列规则大小的训练样本数据集。通过机载多光谱LiDAR数据的试验表明,该方法所生成的样本不仅符合卷积神经网络所要求的输入数据形式,而且能够确保对输入场景的完整覆盖。 相似文献
4.
The aim of the study was to (1) examine the classification of forest land using airborne laser scanning (ALS) data, satellite images and sample plots of the Finnish National Forest Inventory (NFI) as training data and to (2) identify best performing metrics for classifying forest land attributes. Six different schemes of forest land classification were studied: land use/land cover (LU/LC) classification using both national classes and FAO (Food and Agricultural Organization of the United Nations) classes, main type, site type, peat land type and drainage status. Special interest was to test different ALS-based surface metrics in classification of forest land attributes. Field data consisted of 828 NFI plots collected in 2008–2012 in southern Finland and remotely sensed data was from summer 2010. Multinomial logistic regression was used as the classification method. Classification of LU/LC classes were highly accurate (kappa-values 0.90 and 0.91) but also the classification of site type, peat land type and drainage status succeeded moderately well (kappa-values 0.51, 0.69 and 0.52). ALS-based surface metrics were found to be the most important predictor variables in classification of LU/LC class, main type and drainage status. In best classification models of forest site types both spectral metrics from satellite data and point cloud metrics from ALS were used. In turn, in the classification of peat land types ALS point cloud metrics played the most important role. Results indicated that the prediction of site type and forest land category could be incorporated into stand level forest management inventory system in Finland. 相似文献
5.
Three-dimensional (3D) data from airborne laser scanning (ALS) and, more recently, digital aerial photogrammetry (DAP) have been successfully used to model forest attributes. While multi-temporal, wall-to-wall ALS data is not usually available, aerial imagery is regularly acquired in many regions. Thus, the combination of ALS and DAP data provide a sufficient temporal resolution to properly monitor forests. However, field data is needed to fit new forest attribute models for each 3D data acquisition, which is not always affordable. In this study, we examined whether transferability of growing stock volume (GSV) models may provide an improvement in the efficiency of forest inventories updating. We used two available ALS datasets acquired with different characteristics in 2009 and 2010, respectively, generated two DAP point clouds from imagery collected in 2010 and 2017, and utilized field data from two ground surveys conducted in 2009 and 2016-2017. We first analyzed the stability of point cloud derived metrics. Then, Support Vector Regression models based on the most stable metrics were fitted to assess model transferability by applying them to other datasets in four different cases: (1) ALS-ALS, (2) DAP-DAP temporal, (3) ALS-DAP and (4) ALS-DAP temporal. Some metrics were found to be enough stable in each case, so they could be used interchangeably between datasets. The application of models to other datasets resulted in unbiased predictions with relative root mean square error differences ranging from -8.27% to 14.59%. Results demonstrated that 3D-based GSV models may be transferable between point clouds of the same type as well as point clouds acquired using different technologies such as ALS and DAP, suggesting that DAP data may be used as a cost-efficient source of information for updating ALS-assisted forest inventories. 相似文献
6.
This study investigated the combined use of multispectral/hyperspectral imagery and LiDAR data for habitat mapping across parts of south Cumbria, North West England. The methodology adopted in this study integrated spectral information contained in pansharp QuickBird multispectral/AISA Eagle hyperspectral imagery and LiDAR-derived measures with object-based machine learning classifiers and ensemble analysis techniques. Using the LiDAR point cloud data, elevation models (such as the Digital Surface Model and Digital Terrain Model raster) and intensity features were extracted directly. The LiDAR-derived measures exploited in this study included Canopy Height Model, intensity and topographic information (i.e. mean, maximum and standard deviation). These three LiDAR measures were combined with spectral information contained in the pansharp QuickBird and Eagle MNF transformed imagery for image classification experiments. A fusion of pansharp QuickBird multispectral and Eagle MNF hyperspectral imagery with all LiDAR-derived measures generated the best classification accuracies, 89.8 and 92.6% respectively. These results were generated with the Support Vector Machine and Random Forest machine learning algorithms respectively. The ensemble analysis of all three learning machine classifiers for the pansharp QuickBird and Eagle MNF fused data outputs did not significantly increase the overall classification accuracy. Results of the study demonstrate the potential of combining either very high spatial resolution multispectral or hyperspectral imagery with LiDAR data for habitat mapping. 相似文献
7.
Classifying historical remotely sensed imagery using a tempo-spatial feature evolution (T-SFE) model 总被引：1，自引：0，他引：1
Yichun Xie Zongyao Sha Yongfei Bai 《ISPRS Journal of Photogrammetry and Remote Sensing》2010,65(2):182-190
Large and growing archives of orbital imagery of the earth’s surface collected over the past 40 years provide an important resource for documenting past and current land cover and environmental changes. However uses of these data are limited by the lack of coincident ground information with which either to establish discrete land cover classes or to assess the accuracy of their identification. Herein is proposed an easy-to-use model, the Tempo-Spatial Feature Evolution (T-SFE) model, designed to improve land cover classification using historical remotely sensed data and ground cover maps obtained at later times. This model intersects (1) a map of spectral classes (S-classes) of an initial time derived from the standard unsupervised ISODATA classifier with (2) a reference map of ground cover types (G-types) of a subsequent time to generate (3) a target map of overlaid patches of S-classes and G-types. This model employs the rules of Count Majority Evaluation, and Subtotal Area Evaluation that are formulated on the basis of spatial feature evolution over time to quantify spatial evolutions between the S-classes and G-types on the target map. This model then applies these quantities to assign G-types to S-classes to classify the historical images. The model is illustrated with the classification of grassland vegetation types for a basin in Inner Mongolia using 1985 Landsat TM data and 2004 vegetation map. The classification accuracy was assessed through two tests: a small set of ground sampling data in 1985, and an extracted vegetation map from the national vegetation cover data (NVCD) over the study area in 1988. Our results show that a 1985 image classification was achieved using this method with an overall accuracy of 80.6%. However, the classification accuracy depends on a proper calibration of several parameters used in the model. 相似文献
8.
The filtering of point clouds is a ubiquitous task in the processing of airborne laser scanning (ALS) data; however, such filtering processes are difficult because of the complex configuration of the terrain features. The classical filtering algorithms rely on the cautious tuning of parameters to handle various landforms. To address the challenge posed by the bundling of different terrain features into a single dataset and to surmount the sensitivity of the parameters, in this study, we propose an adaptive surface filter (ASF) for the classification of ALS point clouds. Based on the principle that the threshold should vary in accordance to the terrain smoothness, the ASF embeds bending energy, which quantitatively depicts the local terrain structure to self-adapt the filter threshold automatically. The ASF employs a step factor to control the data pyramid scheme in which the processing window sizes are reduced progressively, and the ASF gradually interpolates thin plate spline surfaces toward the ground with regularization to handle noise. Using the progressive densification strategy, regularization and self-adaption, both performance improvement and resilience to parameter tuning are achieved. When tested against the benchmark datasets provided by ISPRS, the ASF performs the best in comparison with all other filtering methods, yielding an average total error of 2.85% when optimized and 3.67% when using the same parameter set. 相似文献
9.
Despite the high richness of information content provided by airborne hyperspectral data, detailed urban land-cover mapping is still a challenging task. An important topic in hyperspectral remote sensing is the issue of high dimensionality, which is commonly addressed by dimensionality reduction techniques. While many studies focus on methodological developments in data reduction, less attention is paid to the assessment of the proposed methods in detailed urban hyperspectral land-cover mapping, using state-of-the-art image classification approaches. In this study we evaluate the potential of two unsupervised data reduction techniques, the Autoassociative Neural Network (AANN) and the BandClust method – the first a transformation based approach, the second a feature-selection based approach – for mapping of urban land cover at a high level of thematic detail, using an APEX 288-band hyperspectral dataset. Both methods were tested in combination with four state-of-the-art machine learning classifiers: Random Forest (RF), AdaBoost (ADB), the multiple layer perceptron (MLP), and support vector machines (SVM). When used in combination with a strong learner (MLP, SVM) BandClust produces classification accuracies similar to or higher than obtained with the full dataset, demonstrating the method’s capability of preserving critical spectral information, required for the classifier to successfully distinguish between the 22 urban land-cover classes defined in this study. In the AANN data reduction process, on the other hand, important spectral information seems to be compromised or lost, resulting in lower accuracies for three of the four classifiers tested. Detailed analysis of accuracies at class level confirms the superiority of the SVM/Bandclust combination for accurate urban land-cover mapping using a reduced hyperspectral dataset. This study also demonstrates the potential of the new APEX sensor data for detailed mapping of land cover in spatially and spectrally complex urban areas. 相似文献
10.
There are now a wide range of techniques that can be combined for image analysis. These include the use of object-based classifications rather than pixel-based classifiers, the use of LiDAR to determine vegetation height and vertical structure, as well terrain variables such as topographic wetness index and slope that can be calculated using GIS. This research investigates the benefits of combining these techniques to identify individual tree species. A QuickBird image and low point density LiDAR data for a coastal region in New Zealand was used to examine the possibility of mapping Pohutukawa trees which are regarded as an iconic tree in New Zealand. The study area included a mix of buildings and vegetation types. After image and LiDAR preparation, single tree objects were identified using a range of techniques including: a threshold of above ground height to eliminate ground based objects; Normalised Difference Vegetation Index and elevation difference between the first and last return of LiDAR data to distinguish vegetation from buildings; geometric information to separate clusters of trees from single trees, and treetop identification and region growing techniques to separate tree clusters into single tree crowns. Important feature variables were identified using Random Forest, and the Support Vector Machine provided the classification. The combined techniques using LiDAR and spectral data produced an overall accuracy of 85.4% (Kappa 80.6%). Classification using just the spectral data produced an overall accuracy of 75.8% (Kappa 67.8%). The research findings demonstrate how the combining of LiDAR and spectral data improves classification for Pohutukawa trees. 相似文献
11.
针对经典极化分类算法在处理机载X波段SAR数据时将过多地物分为体散射类型,并且容易受噪声影响,分类结果存在大量误分现象的问题,通过对机载X波段SAR数据非监督分类方法的研究,提出将极化干涉信息用于机载X波段极化干涉SAR数据的分类。通过运用极化干涉数据进行目标分解得到参数A1和A2对数据进行初始分类,然后结合改进的Wishart最大似然分类算法来进行地物的自适应分类。实验结果表明,该方法能有效避免平地效应的影响,抗噪性好,能正确区分三种典型散射类型,分类效果明显优于极化分类效果。 相似文献
12.
In the past two decades Object-Based Image Analysis (OBIA) established itself as an efficient approach for the classification and extraction of information from remote sensing imagery and, increasingly, from non-image based sources such as Airborne Laser Scanner (ALS) point clouds. ALS data is represented in the form of a point cloud with recorded multiple returns and intensities. In our work, we combined OBIA with ALS point cloud data in order to identify and extract buildings as 2D polygons representing roof outlines in a top down mapping approach. We performed rasterization of the ALS data into a height raster for the purpose of the generation of a Digital Surface Model (DSM) and a derived Digital Elevation Model (DEM). Further objects were generated in conjunction with point statistics from the linked point cloud. With the use of class modelling methods, we generated the final target class of objects representing buildings. The approach was developed for a test area in Biberach an der Riß (Germany). In order to point out the possibilities of the adaptation-free transferability to another data set, the algorithm has been applied “as is” to the ISPRS Benchmarking data set of Toronto (Canada). The obtained results show high accuracies for the initial study area (thematic accuracies of around 98%, geometric accuracy of above 80%). The very high performance within the ISPRS Benchmark without any modification of the algorithm and without any adaptation of parameters is particularly noteworthy. 相似文献
13.
很多情况下,我们得到的遥感影像是模糊难辨的。非监督分类作为最常用的分类手段之一,受这种情况影响严重。应用去相关拉伸处理,可以增强饱和度且保留色度信息,有利于图像解译。本文将在前人研究的基础上,利用光谱特征空间、频率分布直方图和非监督分类的结果分析去相关拉伸,并探究其在非监督分类中的应用。 相似文献
14.
Cici Alexander Kevin Tansey Jörg Kaduk David Holland Nicholas J. Tate 《ISPRS Journal of Photogrammetry and Remote Sensing》2010,65(5):423-432
Airborne laser scanning (ALS) data are increasingly being used for land cover classification. The amplitudes of echoes from targets, available from full-waveform ALS data, have been found to be useful in the classification of land cover. However, the amplitude of an echo is dependent on various factors such as the range and incidence angle, which makes it difficult to develop a classification method which can be applied to full-waveform ALS data from different sites, scanning geometries and sensors. Additional information available from full-waveform ALS data, such as range and echo width, can be used for radiometric calibration, and to derive backscatter cross section. The backscatter cross section of a target is the physical cross sectional area of an idealised isotropic target, which has the same intensity as the selected target. The backscatter coefficient is the backscatter cross section per unit area. In this study, the amplitude, backscatter cross section and backscatter coefficient of echoes from ALS point cloud data collected from two different sites are analysed based on urban land cover classes. The application of decision tree classifiers developed using data from the first study area on the second demonstrates the advantage of using the backscatter coefficient in classification methods, along with spatial attributes. It is shown that the accuracy of classification of the second study area using the backscatter coefficient (kappa coefficient 0.89) is higher than those using the amplitude (kappa coefficient 0.67) or backscatter cross section (kappa coefficient 0.68). This attribute is especially useful for separating road and grass. 相似文献
15.
AbstractThis study proposes the development of a multi-sensor, multi-spectral composite from Landsat-8 and Sentinel-2A imagery referred to as ‘LSC’ for land use land cover (LULC) characterisation and compared with respect to the hyperspectral imagery of the EO1: Hyperion sensor. A three-stage evaluation was implemented based on the similarity observed in the spectral response, supervised classification results and endmember abundance information obtained using linear spectral unmixing. The study was conducted for two areas located around Dhundi and Rohtak in Himachal Pradesh and Haryana, respectively. According to the analysis of the spectral reflectance curves, the spectral response of the LSC is capable of identifying major LULC classes. The kappa accuracy of 0.85 and 0.66 was observed for the classification results from LSC and Hyperion data for Dhundi and Rohtak datasets, respectively. The coefficient of determination was found to be above 0.9 for the LULC classes in both the datasets as compared to Hyperion, indicating a good agreement. Thus, these three-stage results indicated the significant potential of a composite derived from freely available multi-sensor multi-spectral imagery as an alternative to hyperspectral imagery for LULC studies. 相似文献
16.
利用TM数据快速提取含矿蚀变带方法研究 总被引：47，自引：5，他引：47
热液蚀变岩类是在含矿热液作用下引起原岩化学成分和物理性质发生变化的结果，因此蚀变岩类往往与内生产矿产伴生，有时其本身就是含矿体。不同蚀变矿特级组合具有独特的光谱响应，但是光谱的反射和吸收产特征较弱称为遥感找矿弱信息标志。 相似文献
17.
This paper reports an investigation to determine the degree to which digitally processed Landsat TM imagery can be used to discriminate among vegetated lava flows of different ages in the Menengai Caldera, Kenya. Since Landsat data display vegetation parameters well, and plant communities vary with type and depth of soil development, selective digital processing techniques were applied to take advantage of these characteristics for discriminating relative age differences of the underlying volcanics. A selective series of five images, consisting of a color‐coded Landsat 5 classification and four color composites, were compared with geologic maps. These included a color coded, modified, unsupervised classification and contrast enhanced, color composite images using TM bands 3–2–1, 4–3–2 and 7–5–3, and the first 3 Karhunen‐Loeve transformation axes that had been generated using 7 Landsat TM bands. The most recent of more than 70 post‐caldera flows within the caldera are trachytes, which are variably covered by shrubs and subsidiary grasses. Soil development evolves as a function of time, and as such, supports a changing plant community. Progressively older flows exhibit the increasing dominance of grasses over bushes. It was found that the Landsat images correlated well with geologic maps, but that the two mapped age classes could be further subdivided on the basis of different vegetation communities. It is concluded that field maps can be modified, and in some cases corrected by use of such imagery, and that digitally enhanced Landsat imagery can be a useful aid to field mapping in similar terrains. 相似文献
18.
Hyperspectral image and full-waveform light detection and ranging (LiDAR) data provide useful spectral and geometric information for classifying land cover. Hyperspectral images contain a large number of bands, thus providing land-cover discrimination. Waveform LiDAR systems record the entire time-varying intensity of a return signal and supply detailed information on geometric distribution of land cover. This study developed an efficient multi-sensor data fusion approach that integrates hyperspectral data and full-waveform LiDAR information on the basis of minimum noise fraction and principal component analysis. Then, support vector machine was used to classify land cover in mountainous areas. Results showed that using multi-sensor fused data achieved better accuracy than using a hyperspectral image alone, with overall accuracy increasing from 83% to 91% using population error matrices, for the test site. The classification accuracies of forest and tea farms exhibited significant improvement when fused data were used. For example, classification results were more complete and compact in tea farms based on fused data. Fused data considered spectral and geometric land-cover information, and increased the discriminability of vegetation classes that provided similar spectral signatures. 相似文献
19.
Terrestrial laser scanning (TLS) is a valuable tool for creating virtual 3D models of geological outcrops to enable enhanced modeling and analysis of geologic strata. Application of TLS data is typically limited to the geometric point cloud that is used to create the 3D structure of the outcrop model. Digital photography can then be draped onto the 3D model, allowing visual identification and manual spatial delineation of different rock layers. Automation of the rock type identification and delineation is desirable, and recent work has investigated the use of terrestrial hyperspectral photography for this purpose. However, passive photography, whether visible or hyperspectral, presents several complexities, including accurate spatial registration with the TLS point cloud data, reliance on sunlight for illumination, and radiometric calibration to properly extract spectral signatures of the different rock types. As an active remote sensing method, a radiometrically calibrated TLS system offers the potential to directly provide spectral information for each recorded 3D point, independent of solar illumination. Therefore, the practical application of three radiometrically calibrated TLS systems with differing laser wavelengths, thereby achieving a multispectral dataset in conjunction with 3D point cloud data, is investigated using commercially available hardware and software. The radiometric calibration of the TLS intensity values is investigated and the classification performance of the multispectral TLS intensity and calibrated reflectance datasets evaluated and compared to classification performed with passive visible wavelength imagery. Results indicate that rock types can be successfully identified with radiometrically calibrated multispectral TLS data, with enhanced classification performance when fused with passive visible imagery. 相似文献
20.
基于GF2号卫星影像的农业信息提取方法对比分析 总被引：1，自引：0，他引：1
以GF2卫星0.8 m全色/3.2 m多光谱分辨率遥感影像为基础数据源,对基于GF2号卫星影像的农业信息提取流程和方法进行了研究与对比分析。首先对GF2号卫星影像进行波谱分析;其次对GF2号影像进行融合,并对多种融合方法进行质量评价;最后选择阈值法、波谱间关系法、非监督分类法和面向对象法分别对GF2号影像数据进行农业信息提取试验,并对信息提取结果进行精度验证和结果分析。试验表明,面向农业信息提取的GF2号卫星影像融合方法中,Pansharp融合算法融合影像色彩正常,无虚影,清晰度高,地类对比度正常,纹理清晰,熵值及与原始多光谱影像的相关系数高。阈值法和谱间关系法适用于提取单要素农业信息,非监督分类法能够初步获取研究区土地利用情况,面向对象法提取研究区全要素信息精度高。总体来说,不同信息提取方法具有各自的优势,在具体实际应用中,可以根据目标地类的波谱特性,选择适宜的遥感影像处理和信息提取方法。 相似文献