首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
铂族元素矿物共生组合(英文)   总被引：1，自引：2，他引：1  
CHEN Yuan 《现代地质》2001,15(2):131-142
由于铂族元素能有效地降低汽车尾气的污染 ,其需求量日益增加 ,对铂族元素矿床的寻找已是当务之急。着重从矿物矿床学角度对铂族元素的矿物共生特点进行了探讨。铂族元素可呈独立矿床产出 ,主要产于基性超基性层状侵入体、蛇绿岩套及阿拉斯加式侵入体中。铂族元素也伴生于铜镍矿床中 ,该类铜镍矿床主要与苏长岩侵入体、溢流玄武岩及科马提岩有关。产于基性超基性层状侵入体中的铂族矿物有铂钯硫化物、铂铁合金、钌硫化物、铑硫化物、铂钯碲化物、钯砷化物及钯的合金。这些铂族矿物可与硫化物矿物共生 ,也可与硅酸盐矿物共生 ,还可与铬铁矿及其他氧化物矿物共生。产于蛇绿岩套中的铂族矿物主要是钌铱锇的矿物 ,而铂钯铑的矿物则较少出现 ,这些铂族矿物可呈合金、硫化物、硫砷化物以及砷化物 4种形式出现。产于阿拉斯加式侵入体中的铂族矿物主要有铂铁合金、锑铂矿、硫铂矿、砷铂矿、硫锇矿及马兰矿等少数几种 ,其中铂铁合金与铬铁矿及与其同时结晶的高温硅酸盐矿物共生 ,而其他的铂族矿物则与后来的变质作用及蛇纹岩化作用中形成的多金属硫化物及砷化物共生。产于铜镍矿床中的铂族矿物主要是铂和钯的矿物。产于基性超基性层状侵入体、蛇绿岩套及阿拉斯加式侵入体中的铂族矿物的共同特点是它们均与铬铁矿?  相似文献   

2.
Mineralization composed dominantly of primary troilite, maucherite, pentlandite, and chalcopyrite, and secondary valleriite occurs in serpentinized transition zone rocks of the Limasol Forest segment of the Troodos ophiolite complex, Cyprus. Whole-rock and electron microprobe analyses of this mineralization gives ranges of Cu/(Cu+Ni)=0.16 to 0.47, Pt/(Pt+Pd)=0.66 to 0.51, Ni/Co=6.33 to 13.4, and chondrite normalized plots with low concentrations of Rh, Pt, and Pd, but relatively high Au. Estimated distribution coefficients of nickel and iron between olivine and ore range from 0.5 to 7.4. Most of these data are unlike values from magmatic sulfide deposits and indicate either a complete alteration of a preexisting magmatic sulfide concentration or, more likely, a nonmagmatic origin for this mineralization.  相似文献   

3.
金川超大型铜镍硫化物矿床的铂族元素地球化学特征   总被引：21，自引：2，他引：19  
对金川超大型铜镍岩浆硫化物矿床岩石、矿石的铂族元素地球化学特征研究表明 ,金川岩体的平均Cu/Pd值远大于原生地幔岩浆的Cu/Pd值 ,说明其岩石为因硫化物析离而失去Pd的岩浆所结晶 ;且岩石的PGE具有部分熔融趋势 ,与地幔橄榄岩接近 ,这些均指示存在岩浆熔离作用。该矿床岩石、矿石的PGE球粒陨石标准化分布模式比较对应 ,均可分为两种类型 ,反映了岩浆多次侵入、熔离分异同时成岩成矿的特征。另外 ,PGE S关系分析表明其成岩成矿过程中有少量地壳物质混染。PGE地球化学特征参数还指示了其高镁拉斑玄武质母岩浆的性质。  相似文献   

4.
After the discovery of the Aguablanca ore deposit (the unique Ni–Cu mine operating in SW Europe), a number of mafic‐ultramafic intrusions bearing Ni–Cu magmatic sulfides have been found in the Ossa–Morena Zone of the Iberian Massif (SW Iberian Peninsula). The Tejadillas prospect is one of these intrusions, situated close to the border between the Ossa–Morena Zone and the South Portuguese Zone of the Iberian Massif. This prospect contains an average grade of 0.16 wt % Ni and 0.08 wt % Cu with peaks of 1.2 wt % Ni and 0.2 wt % Cu. It forms part of the Cortegana Igneous Complex, a group of small mafic‐ultramafic igneous bodies located 65 km west of the Aguablanca deposit. In spite of good initial results, exploration work has revealed that sulfide mineralization is much less abundant than in Aguablanca. A comparative study using whole‐rock geochemical data between Aguablanca and Tejadillas shows that the Tejadillas igneous rocks present a lower degree of crustal contamination than those of Aguablanca. The low crustal contamination of the Tejadillas magmas inhibited the assimilation of significant amounts of crustal sulfur to the silicate magmas, resulting in the sparse formation of sulfides. In addition, Tejadillas sulfides are strongly depleted in PGE, with total PGE contents ranging from 14 to 81 ppb, the sum of Pd and Pt, since Os, Ir, Ru and Rh are usually below or close to the detection limit (2 ppb). High Cu/Pd ratios (9700–146,000) and depleted mantle‐normalized PGE patterns suggest that the Tejadillas sulfides formed from PGE‐depleted silicate magmas. Modeling has led us to establish that these sulfides segregated under R‐factors between 1000 and 10,000 from a silicate melt that previously experienced 0.015% of sulfide extraction. All these results highlight the importance of contamination processes with S‐rich crustal rocks and multiple episodes of sulfide segregations in the genesis of high‐tenor Ni–Cu–PGE ore deposits in mafic‐ultramafic intrusions of the region.  相似文献   

5.
The platinum-group element geochemistry of rocks and ores from Jinchuan super-large copper-nickel sulfide deposit is systemically studied in this paper. The Cu/Pd mean ratio of Jinchuan intrusion is lower than that of original mantle magma, which indicates that these ultrabasic rocks were crystallized from magma that lost Pd in the form of melting segregation of sulfides. The PGE of the rocks show trend of partial melting, similar to that of mantle peridotite, which shows that magma formation occurs during rock-forming and ore-forming processes. The chondrite normalized PGE patterns of the rocks and ores are well related to each other, which signifies the signatures of multi-episode magmatic intrusion, melting and differentiation in the formation processes of rocks and ores. In addition, analyses about the relation between PGE and S, and study on Re-Os isotopes indicate that few contamination of the crustal substances occurred during the magmatic intrusion and the formation of deposit. However, contamination by crustal substances helps to supply part of the S for the enrichment of PGE. Meanwhile, the hydrothermal process is also advantageous for the enrichment of PGE, especially lbr Pt and Pd, due to deep melting segregation. The characteristic parameters （such as Pt/（Pt＋Pd）, （Pt＋Pd）/（Ru＋Ir＋Os）, Pd/Ir, Cu/（Ni＋Cu）, and so on.） for platinum-group elements for Jinchuan sulfide copper-nickel deposit show the same features as those for sulfide copper-nickel deposit related to basic magma, which also illustrates its original magma property representative of Mg-high tholeiite. Therefore, it is the marie （not ultramafic） magma that resulted in the formation of the superlarge sulfide copper-nickel deposit enriched in Cu and PGE. To sum up, the geochemical characteristics of platinum-group elements in rocks and ores from Jinchuan copper-nickel sulfide deposit are constrained by the continental rift tectonic environment, the parent magma features, the enriched mantel magma source, the complex metallogenesis and PGE geochemical signatures, and this would be rather significant for the study about the genetic mechanism of copper-nickel sulfide deposits.  相似文献   

6.
The Avebury Ni deposit, which has a resource of 260,000 tons of Ni at a grade of 0.9%, is a unique example of a significant Ni sulfide deposit associated with an ophiolite sequence; the deposit is unique because it was formed by hydrothermal processes and also because ophiolites are generally considered unprospective for magmatic Ni sulfide mineralization. The deposit is hosted by Middle Cambrian cumulate peridotite and dunite rocks that were most probably formed from S-poor boninitic magmas. The mineralization, which consists principally of pentlandite, occurs in both serpentinites and skarns in the ultramafic cumulates. The ultramafic rocks are variably metasomatised as the result of the intrusion of the Late Devonian Heemskirk granite. Sulfide-rich and sulfide-poor portions of the ultramafic rocks are variably enriched in W, Bi, U, Pb, Mo, Sn and Sb relative to the primitive mantle. Modest to strong correlations between Cu, Au, Pd, REE, Sn, Mo, W and Ni provide strong evidence that the mineralization is hydrothermal in origin. In situ metasomatism of a magmatic Ni sulfide deposit is ruled out on the basis of poor or negative correlations between Ir, Ru, Rh and Pt when compared to Ni. Although the sulfide-free ultramafic rocks have high Ni contents, this Ni would have been unavailable to the ore-forming fluids as it was hosted in inaccessible sites, such as oxides and silicates. The strong correlations between Au, Pd and Ni suggest that the source of the Ni was magmatic sulfides somewhere at depth that not only have high Ni but also elevated Pd and Au contents.  相似文献   

7.
The Huangshannan magmatic Ni-Cu sulfide deposit is one of a group of Permian magmatic Ni-Cu deposits located in the southern Central Asian Orogenic belt in the Eastern Tianshan, northwest China. It is characterized by elevated Ni tenor (concentrations in recalculated 100% sulfide) in sulfide within ultramafic rocks (9–19 wt%), with values much higher than other deposits in the region. Sulfides of the Huangshannan deposit are composed of pentlandite, chalcopyrite, and pyrrhotite and the host rock is relatively fresh, indicating that the high-Ni tenor is a primary magmatic feature rather than formed by alteration processes. It is shown that sulfides with high-Ni tenor can be generated by sulfide-olivine equilibrium at an oxygen fugacity of QFM +0.5, for magmas containing 450 ppm Ni and 20% olivine. Ores with >10 wt% sulfur have relatively low PGE and Ni tenors compared to other ores, R factor (mass ratio of silicate to sulfide liquid) modeling of Ni indicates that they formed at moderate R values (150–600). Based on this constraint on R values, ores with <10 wt% sulfides in the Huangshannan deposit can be segregated from a similar parental magma with 0.05 ppb Os, 0.023 ppb Ir, and 0.5 ppb Pd at R values between 600 and 3000. This, coupled with the supra-cotectic proportions of sulfide liquid to cumulus silicates in the Huangshannan ores imply mechanical transport and deposition of sulfide liquid in a magma pathway or conduit, in which sulfides must have interacted with large volumes of silicate magma. Platinum and Pd depletion relative to other platinum group elements (PGEs) are observed in fresh and sulfide-rich samples (S > 4.5 wt%). As sulfide-rich samples are also depleted in Cu, and as interstitial sulfides in those samples are physically interconnected at a scale of several cms, the low Pt and Pd anomalies are attributed to solid Pt and Pd phases crystallization and retention with the monosulfide solid solution (MSS) and Cu-rich sulfide liquid percolation during MSS fractionation. This finding indicates that Pt anomalies in sulfide-rich rocks from magmatic Ni-Cu deposits in the Eastern Tianshan are the result of sulfide fractionation rather than a hydrothermal effect. 187Os/188Os(278Ma) values of the lherzolite samples vary from 0.27 to 0.37 and γOs(278Ma) values vary from 110 to 189, indicating significant magma interaction with crustal sulfides, rich in radiogenic Os. Well constrained γOs values and δ34S values (−0.4 to 0.8‰) indicate that crustal contamination occurred at depth before the arrival of the magma in the Huangshannan chamber. Regionally, deposits with high-Ni tenor have not been reported other than the Huangshannan deposit; however, many intrusions with high-Ni contents in olivine are present in NW China, such as the Erhongwa, Poyi and Poshi intrusions. Those intrusions are capable of forming high-Ni tenor sulfides due to olivine-sulfide-silicate equilibrium and relative high-Ni content in parent magma, making them attractive exploration targets.  相似文献   

8.
The Kalatongke (also spelt as Karatungk) Ni–Cu–(platinum-group element, PGE) sulfide deposit, containing 33 Mt sulfide ore with a grade of 0.8 wt.% Ni and 1.3 wt.% Cu, is located in the Eastern Junggar terrane, Northern Xinjiang, NW China. The largest sulfide ore body, which occupies more than 50 vol.% of the intrusion Y1, is dominantly comprised of disseminated sulfide with a massive sulfide inner zone. Economic disseminated sulfides also occur at the base of the intrusions Y2 and Y3. The main host rock types are norite in the lower part and diorite in the upper part of each intrusion. Enrichment in large ion lithophile elements and depletion in heavy rare earth elements relative to mid-ocean ridge basalt indicate that the mafic intrusions were produced from magmas derived from a metasomatized garnet lherzolite mantle. The average grades of the disseminated ores are 0.6 wt.% Ni and 1.1 wt.% Cu, whereas those of the massive ores are 2 wt.% Ni and 8 wt.% Cu. The PGE contents of the disseminated ores (14–69 ppb Pt and 78–162 ppb Pd) are lower than those of the massive ores (120–505 ppb Pt and 30–827 ppb Pd). However, on the basis of 100% sulfide, PGE contents of the massive sulfides are lower than those of the disseminated sulfides. Very high Cu/Pd ratios (>4.5 × 104) indicate that the Kalatongke sulfides segregated from PGE-depleted magma produced by prior sulfide saturation and separation. A negative correlation between the Cu/Pd ratio and the Pd content in 100% sulfide indicates that the PGE content of the sulfide is controlled by both the PGE concentrations in the parental silicate magma and the ratio of the amount of silicate to sulfide magma. The negative correlations between Ir and Pd indicate that the massive sulfides experienced fractionation.  相似文献   

9.
Archean komatiites host important resources of Ni, Cu, Co, and PGE, particularly in Western Australia and Canada. In Finland, several small, low-grade sulfide deposits have been found in komatiites, including the ca. 2.8 Ga Vaara deposit in the Archean Suomussalmi greenstone belt. It occurs in the central part of the serpentinized olivine cumulate zone of a komatiitic extrusive body and is composed of disseminated interstitial sulfides consisting of pyrite, pentlandite, millerite, violarite, and chalcopyrite accompanied by abundant magnetite. Although currently subeconomic, the mineralization is interesting due to the very high chalcophile element contents of the sulfide fraction (38 wt% Ni, 3.4 wt% Cu, 0.7 wt% Co, 22.4 ppm Pd, and 9.5 ppm Pt). The sulfides occur in relatively Cr-poor olivine cumulates suggesting involvement of a chromite-undersaturated magma. The parental magma was an Al-undepleted komatiite with an estimated MgO content of at least 24 wt%. In contrast to the common komatiite types in the eastern Finland greenstone belts, the Vaara rocks are moderately enriched in LREE relative to MREE, suggesting that crustal contamination played an important role in the genesis of the Vaara deposit. Multiple sulfur isotope data reveal considerable mass-independent sulfur isotope fractionation both in country rock sedimentary sulfides (Δ33S ranges from ?0.50 to +2.37?‰) and in the Vaara mineralization (Δ33S ranges from +0.53 to +0.66?‰), which provides strong evidence for incorporation of crustal sulfur. Extensive replacement of interstitial sulfides by magnetite and the presence of millerite- and violarite-bearing, pyrrhotite-free sulfide assemblages indicate significant post-magmatic, low-temperature hydrothermal oxidation of the primary magmatic pyrrhotite-pentlandite-chalcopyrite assemblages and associated sulfur loss that led to a significant upgrading of the original metal tenors of the Vaara deposit.  相似文献   

10.
喀拉通克铜镍矿床位于准噶尔板块北缘,矿区主要矿体赋存于Y1-Y3号岩体中。矿石构造类型为致密块状和浸染状两大类,其中前者与后者呈贯入接触,不同浸染状类型之间为过渡关系。岩石和矿石的PGE总量偏低,且以PPGE为主,IPGE含量较低。整体上岩石中的PGE含量显示随基性程度降低而变小。矿石中的PGE含量随硫化物含量增加增大,显示PGE主要分布于硫化物熔离形成的物相中。100%硫化物计算后,矿石PGE含量平均仅为573×10-9。各岩体中浸染状矿石PGE组成并无明显差异;岩石和矿石具有相似的PGE分配模式,均属于Pt-Pd配分型。岩石Ni/Cu-Pd/Ir关系以及岩石地球化学资料显示,形成喀拉通克岩体的初始岩浆为MgO含量较高的玄武质岩浆,属于PGE不亏损的岩浆。基于PGE不亏损的大陆拉斑玄武岩初始岩浆推算,喀拉通克矿床母岩浆明显亏损PGE,而深部硫化物熔离可能是导致母岩浆PGE亏损的主要原因。岩石和矿石Pd/Pt比值总体特征,岩石Cr与Ni、Ir、Ru和Rh相关性,以及硫同位素和岩石学资料分析表明,初始岩浆在地壳深部发生的橄榄石、铬铁矿等矿物的分离结晶作用,可能是促使硫过饱和与深部熔离的主要因素。IPGE与PPGE分异特征及其相关分析,结合矿床宏观地质特征,推断该矿床浸染状矿的成矿作用经历了初始岩浆（PGE不亏损）→橄榄石等矿物分离结晶→硫化物深部熔离→成矿母岩浆（PGE亏损）→上侵并结晶分异的成矿过程。块状矿则可能是这一过程中PGE亏损的成矿母岩浆相对滞后熔离形成的硫化物熔体贯入的结果。  相似文献   

11.
The Jinchuan deposit, NW China, is one of the world’s most important Ni-Cu-(PGE) sulfide deposits related to a magma conduit system and is hosted in an ultramafic intrusion. The intrusion is composed of lherzolite and dunite with the two largest sulfide ore bodies (named as ore body 1 and 2) in its middle portion. The sulfide ores may be disseminated, net-textured, or massive. The disseminated and net-textured sulfide ores are characterized by variable but generally low PGE concentrations: 10-3200 ppb Pt, 240-9800 ppb Pd, 17-800 ppb Ir, 25-1500 ppb Ru, and 15-400 ppb Rh in 100% sulfides. The massive sulfide ores are extremely low in Pt (<30 ppb) on a 100% sulfides and have very high Cu/Pd ratios, ranging from 104 to 4.5 × 105. The low PGE contents suggest that the sulfide ores formed from the silicate magmas that had already experienced prior-sulfide separation.Our calculations indicate that if the first stage basaltic magmas had contained 6.3 ppb Pt, 6.2 ppb Pd, and 0.1 ppb Ir, 0.008% sulfide removal would result in PGE-depletion in the residual magma with 0.57 ppb Pt, 0.25 ppb Pd, and 0.009 ppb Ir. The Jinchuan sulfides were formed by a second stage of sulfide segregation from a PGE-depleted magma under silicate/sulfide liquid ratios (R-factor) ranging from 103 to 104 in a deep-seated staging chamber. The massive sulfide ores and some of the net-textured sulfide ores exhibit strong negative Pt-anomalies that cannot be explained by sulfide segregation under variable R-factors. Instead, the sulfide melts that formed the massive ores were segregated from magmas experienced prior fractionation of Pt-Fe alloy. Alternatively, the Pt may have been selectively leached by hydrothermal fluids during remobilization of the sulfide melts that produced the massive sulfides, which occur in cross-cutting veins. We propose that the Jinchuan intrusion and ore bodies were formed by injections of sulfide-free and sulfide-bearing olivine mushes from a deep-seated staging chamber.  相似文献   

12.
采用ICP—MS方法分析了煎茶岭和金川硫化镍矿床岩石、矿石的铂族元素含量,煎茶岭岩体蛇纹岩的Cu／Pd比值低于原生地幔岩浆,说明岩浆熔离作用较弱,矿石的Pd／Ir比值较小,指示其多数矿石属于岩浆型,以岩浆成矿作用为主;而金川岩体的平均Cu／Pd比值远大于原生地幔岩浆,表明岩浆熔离作用强,矿石的Pd／Ir比值较大,体现了钯族元素矿化及成矿物质以幔源为主的特征。煎茶岭在成矿过程中有壳源物质的混染,整体上岩石、矿石铂族元素含量较低,这与岩浆熔离作用弱、铂族元素成矿作用不发育等因素有关;金川在成岩成矿过程中也有少量地壳物质的混染,但岩石、矿石铂族元素含量较高,反映了以岩浆深部熔离成矿作用为主的特征。  相似文献   

13.
  相似文献   

14.
The distribution of platinum group elements (PGEs) in massive sulfides and hematite–magnetite±pyrite assemblages from the recently discovered basalt-hosted Turtle Pits hydrothermal field and in massive sulfides from the ultramafic-hosted Logatchev vent field both on the Mid-Atlantic Ridge was studied and compared to that from selected ancient volcanic-hosted massive sulfide (VHMS) deposits. Cu-rich samples from black smoker chimneys of both vent fields are enriched in Pd and Rh (Pd up to 227 ppb and Rh up to 149 ppb) when compared to hematite–magnetite-rich samples from Turtle Pits (Pd up to 10 ppb, Rh up to 1.9 ppb). A significant positive correlation was established between Cu and Rh in sulfide samples from Turtle Pits. PGE chondrite-normalized patterns (with a positive Rh anomaly and Pd and Au enrichment), Pd/Pt and Pd/Au ratios close to global MORB, and high values of Pd/Ir and Pt/Ir ratios indicate mafic source rock and seawater involvement in the hydrothermal system at Turtle Pits. Similarly shaped PGE chondrite-normalized patterns and high values of Pd/Pt and Pd/Ir ratios in Cu-rich sulfides at Logatchev likely reflect a similar mechanism of PGE enrichment but with involvement of ultramafic source rocks.  相似文献   

15.
The behavior of the platinum group elements (PGE) and Re in felsic magmas is poorly understood due to scarcity of data. We report the concentrations of Ni, Cu, Re, and PGE in the compositionally diverse Boggy Plain zoned pluton (BPZP), which shows a variation of rock type from gabbro through granodiorite and granite to aplite with a SiO2 range from 52 to 74 wt %. In addition, major silicate and oxide minerals were analyzed for Ni, Cu, and Re, and a systematic sulfide study was carried out to investigate the role of silicate, oxide, and sulfide minerals on chalcophile element geochemistry of the BPZP. Mass balance calculation shows that the whole rock Cu budget hosted by silicate and oxide minerals is <13 wt % and that Cu is dominantly located in sulfide phases, whereas most of the whole rock Ni budget (>70 wt %) is held in major silicate and oxide minerals. Rhenium is dominantly hosted by magnetite and ilmenite. Ovoid-shaped sulfide blebs occur at the boundary between pyroxene phenocrysts and neighboring interstitial phases or within interstitial minerals in the gabbro and the granodiorite. The blebs are composed of pyrrhotite, pyrite, chalcopyrite, and S-bearing Fe-oxide, which contain total trace metals (Co, Ni, Cu, Ag, Pb) up to ~16 wt %. The mineral assemblage, occurrence, shape, and composition of the sulfide blebs are a typical of magmatic sulfide. PGE concentrations in the BPZP vary by more than two orders of magnitude from gabbro (2.7–7.8 ppb Pd, 0.025–0.116 ppb Ir) to aplite (0.05 ppb Pd, 0.001 ppb Ir). Nickel, Cu, Re, and PGE concentrations are positively correlated with MgO in all the rock types although there is a clear discontinuity between the granodiorite and the granite in the trends for Ni, Rh, and Ir when plotted against MgO. Cu/Pd values gradually increase from 6,100 to 52,600 as the MgO content decreases. The sulfide petrology and chalcophile element geochemistry of the BPZP show that sulfide saturation occurred in the late gabbroic stage of magma differentiation. Segregation and distribution of these sulfide blebs controlled Cu and PGE variations within the BPZP rocks although the magma of each rock type may have experienced a different magma evolution history in terms of crustal assimilation and crystal fractionation. The sulfide melt locked in the cumulate rocks must have sequestered a significant portion of the chalcophile elements, which restricted the availability of these metals to magmatic-hydrothermal ore fluids. Therefore, we suggest that the roof rocks that overlay the BPZP were not prospective for magmatic-hydrothermal Cu, Au, or Cu–Au deposits.  相似文献   

16.
卢宜冠  和文言 《地学前缘》2018,25(6):196-208
金宝山杂岩体位于扬子板块西缘,毗邻哀牢山造山带北段,岩体中蕴含丰富的铂钯资源,是峨眉山大火成岩省(ELIP)中大型岩浆型铂族元素矿床。岩体的主要组成为辉石橄榄岩,矿体以似层状、透镜状产出于辉石橄榄岩中。地幔是镍矿床和铂族元素矿床最重要的源区,因而对Ni、Cu及PGE等元素行为的研究,是剖析岩浆型Ni-Cu-PGE矿床源区特征的一个重要研究方向。该研究获得金宝山岩体中辉橄岩铂族元素及Sr-Nd同位素数据,结合前人对ELIP中不同类型岩石系列PGE成分研究及Ni、Cu、PGE等元素在岩浆和硫化物中的分配系数,半定量模拟得到金宝山原始岩浆的形成源于地幔中高度部分熔融(25%~40%)形成的富PGE岩浆(含12.8×10-9 Pd,9.8×10-9 Pt,0.6×10-9 Rh和0.7×10-9 Ir),其铂族元素成分与ELIP苦橄岩成分相当,并且岩浆在演化的过程中遭受了10%~20%地壳混染作用。利用批式部分熔融公式及各铂族元素在硅酸盐矿物和熔体之间的分配系数反演计算得到产生金宝山熔体的地幔约含有5.3×10-9 Pd,7.5×10-9 Pt,0.75×10-9 Rh和1.5×10-9 Ir,相比原始地幔而言并没有表现出明显富集PGE的特征。这表明地幔中高度部分熔融+大量岩浆与硫化物的充分反应是形成大型岩浆型铂族元素矿床的一种可具备的条件。  相似文献   

17.
PGE mineralization has been identified in various rock types and at various stratigraphic levels in layered intrusions of any age, size and magmatic lineage, but the most important deposits occur as relatively narrow stratiform reefs in the lower to central ultramafic–mafic portions of large tholeiitic intrusions of late Archean to early Proterozoic age. One of the main challenges in exploration is that the reefs tend to be sulfide-poor. In many chromitites, magnetitites and silicate-hosted ores, the rocks contain no visible sulfides, possibly due to (late) magmatic sulfide resorption. As a result, some deposits may have been overlooked, particularly those in the upper portions of the intrusions that were in the past considered to be relatively unprospective. Amongst lithogeochemical tools, Cu/Pd ratios have proven to be particularly useful to evaluate the PGE potential of intrusions and to delineate the position of the reefs within the intrusions.The origin of the PGE mineralization remains controversial. A possible explanation for the low sulfide contents of many PGE-rich intrusions is that most of their parental magmas were strongly undersaturated in sulfur and at least partially derived from the S-poor and PGE-enriched sub-continental lithospheric mantle. Sulfide saturation upon emplacement in the crust may have been reached during differentiation. Empirical evidence supports theoretical considerations that chromite and magnetite precipitation may be particularly conducive to trigger sulfide melt saturation, due to a pronounced decrease in FeO content of the magma. The importance of magma mixing in triggering sulfide supersaturation remains unclear. The same applies to contamination; some intrusions show a distinct crustal component, but many others do not, and there is little if any correlation between sulfide content and crustal component. Together with the general paucity of sulfides in the intrusions this could suggest that contamination is not critical in reef formation and may indeed be a negative factor.Other processes may also be relevant to reef formation. Data from the well-studied Bushveld Complex suggest that the magmas had reached sulfide saturation prior to emplacement, and that sulfides were entrained in the magma during ascent and emplacement. Sulfide entrainment has previously been recognised as one of the key factors in the formation of massive Ni–Cu sulfide deposits, and it is suggested here that it is also relevant to the formation of PGE deposits.  相似文献   

18.
Summary The Ni–Cu–Platinum Group Element (PGE) sulfide deposits of the Sudbury Structure have provided a major portion of the worlds total nickel production and their host rocks have been the subject of numerous research studies, yet a number of perplexing problems remain to be solved. On the one hand, studies seeking to explain the formation of the Sudbury Structure have now converged on a genetic model which proposes that the Main Mass and Offset Dykes of the Sudbury Igneous Complex (SIC) were produced by crystallization of an impact-generated melt sheet. On the other hand, these models have yet to be fully reconciled with the production of the very large volume of magmatic Ni, Cu, Co, and PGE-rich sulfide mineralization and the associated mafic rock types. This paper explores this problem using new precious metal data from the Main Mass and Offset Dykes. These data are used to understand the relationships between these rocks, and to provide constraints on how the Ni–Cu–PGE sulfide ore deposits fit into the geological evolution of the Sudbury Structure.In the two drill cores selected for study in this project, the Mafic Norite has 1–5 modal percent pyrrhotite plus chalcopyrite, and elevated Ni (40–1000ppm), Cu (40–1140ppm), and PGE (1.9–7.8ppb Pd, 1.8–7.3ppb Pt); this is overlain by Felsic Norite that contains pyrrhotite, and has a wide range in concentration of Ni (13–257ppm), Cu (7–328ppm), and PGE (<0.01–6.4ppb Pd, <0.01–5ppb Pt). For a similar range of MgO, the upper portion of the Felsic Norite unit has 5–10 times lower Ni and Cu abundances than within-plate basalts and local crustal rocks, and PGE abundance levels are mostly below analytical determination limits. Stratigraphic studies of other compositional profiles around the SIC demonstrate that this depletion signature of Ni, Cu, and PGE is widespread and developed not only above mineralized embayments and offsets, but also above barren sections of the lower contact of the SIC.The depletion of the upper part of the Felsic Norite in Ni, Cu and PGE is presumably due to equilibration of the magma with magmatic sulfide, and accumulation of this dense sulfide liquid. Results of modeling indicate that the parental magma giving rise to the Mafic and Felsic Norites had initial Ni and Cu contents of 210 and 110ppm, respectively. In addition, Ni, Cu and PGE tenors calculated in 100% sulfide from the Copper Cliff Offset average 13% Cu, 6% Ni, 18ppm Pd, and 19ppm Pt indicating that these sulfides had formed by fractionation from magmas that contained 310ppm Ni, 310ppm Cu, 18ppb Pd and 19ppb Pt. These values are factors of 3 to 5 higher than the Ni, Cu, Pd, and Pt contents of the Onaping Formation with average values of 55ppm Ni, 48ppm Cu, and 4.9ppb Pd as well as the marginal sulfide-poor phase of the Worthington Offset quartz diorite, which has average values of 61ppm Ni, 59ppm Cu, 2.8ppb Pd and 4.0ppb Pt. Both the Onaping Formation and the marginal quartz diorite are believed to represent the initial composition of a large component of the melt sheet. There is therefore a fundamental problem in reconciling the initial metal contents of the SIC magma as indicated by the marginal phases of the Offset dykes and that of the Onaping Formation with the composition of the SIC magma at the times of formation of the sulfides as indicated by their Ni, Cu and PGE tenors.It is proposed that because the SIC melt sheet was initially superheated with a temperature of 1700°C, it was able to dissolve 5 times as much S as it could at its liquidus temperature of 1200°C. It was also initially composed of an emulsion of mafic and felsic melts (Marsh and Zieg, 1999), which may have formed discrete magma cells. As the temperature of the melt sheet decreased, some of these magma cells became S-saturated and the resultant Ni–Cu–PGE sulfides settled downwards and on reaching magma cells lower in the melt sheet were re-dissolved thereby raising the Ni, Cu and PGE contents of the lower magma cells. It was from these enriched magma cells that precipitation of the ore-forming Ni–Cu–PGE sulfide melts eventually took place.The mineral potential of Offset and embayment structures appears to be empirically linked to the thickness of the overlying noritic rocks; for example, the most heavily mineralized embayments and Offset Dykes are located in areas where the Felsic Norite is thickest. It appears unlikely that the entire 1–3km-thick melt sheet was convectively mixing throughout its lateral extent, and so the heterogeneity in sulfide distribution was retained after crystallization and cooling.  相似文献   

19.
攀西裂谷地区层状镁铁岩的PGE矿化作用   总被引：2，自引：1，他引：1  
攀西裂谷位于四川西部,裂谷经历了元古宙和海西期二次地幔柱活动,形成多处穹窿构造和层状镁铁质岩体的侵入。后一期的层状岩体赋存著名的超大型钒钛磁铁矿床。中国和南非合作研究认为,层状岩体PGE矿化应进一步研究。以新街岩体为代表,经钻探工程建立了岩体剖面;岩石学、矿物学和地球化学研究证实,岩体有三个岩浆旋回和许多韵律层,层厚仅2~3cm。自上而下岩相为辉长岩、橄辉岩、辉石岩和橄榄岩,造岩矿物为贵橄榄石、普通辉石、钛普通辉石和中长石。岩体下部旋回,硫化物较富集,多在高镁质岩相。硅酸盐、氧化物和硫化物三系列矿物共生而不混熔。硫化物呈浸染状,主要有三层,产在橄榄岩、辉石岩和下辉长岩内。铂族矿物有砷铂矿、自然铂、硫锇矿、铋碲钯矿、碲铋矿、碲银矿、自然银等。PGE富集可能有三个阶段:岩浆早期,岩浆中"S"不饱和,PGE易进入硅酸盐;岩浆晚期"S"逸度增高,硫化物富集,为PGE富集阶段;热液阶段PGE再分配富集。PGE和Ni、Cu、S为正相关关系,和Fe、Ti相辅相成,无明显关系。岩石中PGE背景值为(0.166~0.411)×10-6,PGE矿化体的品位变化较大,为(0.94~0.976)×10-6。有的钻孔样品Pt+Pd含量大于1×10-6,可做进一步找矿的依据。  相似文献   

20.
The Binchuan area of Yunnan is located in the western part of the Emeishan large igneous province in the western margin of the Yangtze Block.In the present study,the Wuguiqing profile in thickness of about 1440 m is mainly composed of high-Ti basalts,with minor picrites in the lower part and andesites,trachytes,and rhyolites in the upper part.The picrites have relatively higher platinum-group element（PGE） contents（ΣPGE=16.3-28.2 ppb）,with high Cu/Zr and Pd/Zr ratios,and low S contents（5.03-16.9 ppm）,indicating the parental magma is S-unsaturated and generated by high degree of partial melting of the Emeishan large igneous province（ELIP） mantle source.The slightly high Cu/Pd ratios（11 000-24 000） relative to that of the primitive mantle suggest that 0.007%sulfides have been retained in the mantle source.The PGE contents of the high-Ti basalts exhibit a wider range（ΣPGE=0.517-30.8 ppb）.The samples in the middle and upper parts are depleted in PGE and haveεNd（260 Ma） ratios ranging from -2.8 to -2.2,suggesting that crustal contamination of the parental magma during ascent triggered sulfur saturation and segregation of about 0.446%-0.554% sulfides,and the sulfide segregation process may also provide the ore-forming material for the magmatic Cu-Ni-PGE sulfide deposits close to the studied basalts.The samples in this area show Pt-Pd type primitive mantle-normalized PGE patterns,and the Pd/Ir ratios are higher than that of the primitive mantle（Pd/Ir=1）,indicating that the obvious differentiation between Ir-group platinum-group elements（IPGE） and Pd-group platinum-group elements（PPGE） are mainly controlled by olivine or chromites fractionation during magma evolution.The Pd/Pt ratios of most samples are higher than the average ratio of mantle（Pd/Pt=0.55）,showing that the differentiation happened between Pt and Pd.The differentiation in picrites may be relevant to Pt hosted in discrete refractory Pt-alloy phase in the mantle;whereas the differentiation in the high-Ti basalts is probably associated with the fractionation of Fe-Pt alloys,coprecipitating with Ir-Ru-Os alloys.Some high-Ti basalt samples exhibit negative Ru anomalies,possibly due to removal of laurite collected by the early crystallized chromites.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号