共查询到20条相似文献，搜索用时 23 毫秒
1.
Abstract The pattern of radial and concentric offset dikes at Sudbury strongly resembles fracture patterns in certain volcanically modified craters on the Moon. Since the Sudbury dikes apparently formed shortly after the impact event, this resemblance suggests that early endogenic modification at Sudbury was comparable to deformation in lunar floor-fractured craters. Although regional deformation has obscured many details of the Sudbury Structure, such a comparison of Sudbury with lunar floor-fractured craters provides two alternative models for the original size and surface structures of the Sudbury basin. First, the Sudbury date pattern can be correlated with fractures in the central peak crater Haldane (36 km in diameter). This comparison indicates an initial Sudbury diameter of between 100 and 140 km but requires loss of a central peak complex for which there is little evidence. Alternatively, comparison of the Sudbury dikes with fractures in the two-ring basin Schrödinger indicates an initial Sudbury diameter of at least ～ 180 km, which is in agreement with other recent estimates for the size of the Sudbury Structure. In addition to constraining the size and structure of the original Sudbury crater, these comparisons also suggest that crater modification may reflect different deformation mechanisms at different sizes. Most lunar floor-fractured craters are attributed to deformation over a shallow, crater-centered intrusion; however, there is no evidence for such an intrusion at Sudbury. Instead, melts from the evolving impact melt sheet probably entered fractures formed by isostatically-induced flexure of the crater floor. Since most of the lunar floor-fractured craters are too small (<100-km diameter) to induce significant isostatic adjustment, crater modification by isostatic uplift apparently is limited to only the largest of craters, whereas deformation over igneous intrusions dominates the modification of smaller craters. 相似文献
2.
New crater size-shape data were compiled for 221 fresh lunar craters and 152 youthful mercurian craters. Terraces and central peaks develop initially in fresh craters on the Moon in the 0–10 km diameter interval. Above a diameter of 65 km all craters are terraced and have central peaks. Swirl floor texture is most common in craters in the size range 20–30 km, but it occurs less frequently as terraces become a dominant feature of crater interiors. For the Moon there is a correlation between crater shape and geomorphic terrain type. For example, craters on the maria are more complex in terms of central peak and terrace detail at any given crater diameter than are craters in the highlands. These crater data suggest that there are significant differences in substrate and/or target properties between maria and highlands. Size-shape profiles for Mercury show that central peak and terrace onset is in the 10–20 km diameter interval; all craters are terraced at 65 km, and all have central peaks at 45 km. The crater data for Mercury show no clear cut terrain correlation. Comparison of lunar and mercurian data indicates that both central peaks and terraces are more abundant in craters in the diameter range 5–75 km on Mercury. Differences in crater shape between Mercury and the Moon may be due to differences in planetary gravitational acceleration (gMercury=2.3gMoon). Also differences between Mercury and the Moon in target and substrate and in modal impact velocity may contribute to affect crater shape. 相似文献
3.
Eugene I. Smith 《Icarus》1976,28(4):543-550
New central peak-crater size data for Mars shows that a higher percentage of relatively unmodified Martian craters have central peaks than do fresh lunar craters below a diameter of 30 km. For example, in the diameter range 10 to 20 km, 60% of studied Martian craters have central peaks compared to 26% for the Moon. Gault et al. (1975, J. Geophys. Res.80, 2444–2460) have demonstrated that central peaks occur in smaller craters on Mercury than on the Moon, and that this effect is due to the different gravity fields in which the craters formed. Similar differences when comparing Mars and the Moon show that gravity has affected the diameter at which central peaks form on Mars. Erosion on Mars, therefore, does not completely mask differences in crater interior structure that are caused by differences in gravity. Effects of Mars' higher surface gravity when compared to the Moon are not detected when comparing terrace and crater shape data. The morphology-crater size statistics also show that a full range of crater shapes occur on Mars, and craters tend to become more morphologically complex with increasing diameter. Comparisons of Martian and Mercurian crater data show differences which may be related to the greater efficacy of erosion on Mars. 相似文献
4.
Veronica J. BRAY Gareth S. COLLINS Joanna V. MORGAN Paul M. SCHENK 《Meteoritics & planetary science》2008,43(12):1979-1992
Abstract— We examine the morphology of central peak craters on the Moon and Ganymede in order to investigate differences in the near‐surface properties of these bodies. We have extracted topographic profiles across craters on Ganymede using Galileo images, and use these data to compile scaling trends. Comparisons between lunar and Ganymede craters show that crater depth, wall slope and amount of central uplift are all affected by material properties. We observe no major differences between similar‐sized craters in the dark and bright terrain of Ganymede, suggesting that dark terrain does not contain enough silicate material to significantly increase the strength of the surface ice. Below crater diameters of ?12 km, central peak craters on Ganymede and simple craters on the Moon have similar rim heights, indicating comparable amounts of rim collapse. This suggests that the formation of central peaks at smaller crater diameters on Ganymede than the Moon is dominated by enhanced central floor uplift rather than rim collapse. Crater wall slope trends are similar on the Moon and Ganymede, indicating that there is a similar trend in material weakening with increasing crater size, and possibly that the mechanism of weakening during impact is analogous in icy and rocky targets. We have run a suite of numerical models to simulate the formation of central peak craters on Ganymede and the Moon. Our modeling shows that the same styles of strength model can be applied to ice and rock, and that the strength model parameters do not differ significantly between materials. 相似文献
5.
The origin of the multiple concentric rings that characterize lunar impact basins, and the probable depth and diameter of the transient crater have been widely debated. As an alternative to prevailing “megaterrace” hypotheses, we propose that the outer scarps or mountain rings that delineate the topographic rims of basins—the Cordilleran at Orientale, the Apennine at Imbrium, and the Altai at Nectaris—define the transient cavities, enlarged relatively little by slumping, and thus are analogous to the rim crests of craters like Copernicus; inner rings are uplifted rims of craters nested within the transient cavity. The magnitude of slumping that occurs on all scarps is insufficient to produce major inner rings from the outer. These conclusions are based largely on the observed gradational sequence in lunar central uplifts:. from simple peaks through somewhat annular clusters of peaks, peak and ring combinations and double ring basins, culminating in multiring structures that may also include peaks. In contrast, belts of slump terraces are not gradational with inner rings. Terrestrial analogs suggest two possible mechanisms for producing rings. In some cases, peaks may expand into rings as material is ejected from their cores, as apparently occurred at Gosses Bluff, Australia. A second process, differential excavation of lithologically diverse layers, has produced nested experimental craters and is, we suspect, instrumental in the formation of terrestrial ringed impact craters. Peak expansion could produce double-ring structures in homogeneous materials, but differential excavation is probably required to produce multiring and peak-in-ring configurations in large lunar impact structures. Our interpretation of the representative lunar multiring basin Orientale is consistent with formation of three rings in three layers detected seismically in part of the Moon—the Cordillera (basin-bounding) ring in the upper crust, the composite Montes Rook ring in the underlying, more coherent “heald” crust, and an innermost, 320-km ring at the crust-mantle interface. Depth-diameter ratios of are consistent with this interpretation and suggest that volumes of transient cavities and hence of basin ejecta may be considerably greater than commonly assumed. 相似文献
6.
Twenty-one lunar craters have radar bright ring appearances which are analogous to eleven complete ring features in the earth-based 12.5 cm observations of Venus. Radar ring diameters and widths for the lunar and Venusian features overlap for sizes from 45 to 100 km. Radar bright areas for the lunar craters are associated with the slopes of the inner and outer rim walls, while level crater floors and level ejecta fields beyond the raised portion of the rim have average radar backscatter. We propose that the radar bright areas of the Venusian rings are also associated with the slopes on the rims of craters.The lunar craters have evolved to radar bright rings via mass wasting of crater rim walls and via post impact flooding of crater floors. Aeolian deposits of fine-grained material on Venusian crater floors may produce radar scattering effects similar to lunar crater floor flooding. These Venusian aeolian deposits may preferentially cover blocky crater floors producing a radar bright ring appearance.We propose that the Venusian features with complete bright ring appearances and sizes less than 100 km are impact craters. They have the same sizes as lunar craters and could have evolved to radar bright rings via analogous surface processes. 相似文献
7.
Multiple impact basins formed on the Moon about 3.8 Gyr ago in what is known as the lunar cataclysm or Late Heavy Bombardment. Many workers currently interpret the lunar cataclysm as an impact spike primarily caused by main-belt asteroids destabilized by delayed planetary migration. We show that morphologically fresh (class 1) craters on the lunar highlands were mostly formed during the brief tail of the cataclysm, as they have absolute crater number density similar to that of the Orientale basin and ejecta blanket. The connection between class 1 craters and the cataclysm is supported by the similarity of their size-frequency distribution to that of stratigraphically-identified Imbrian craters. Majority of lunar craters younger than the Imbrium basin (including class 1 craters) thus record the size-frequency distribution of the lunar cataclysm impactors. This distribution is much steeper than that of main-belt asteroids. We argue that the projectiles bombarding the Moon at the time of the cataclysm could not have been main-belt asteroids ejected by purely gravitational means. 相似文献
8.
An analysis has been made of the tendency of large lunar craters to lie along circles. A catalog of the craters ? 50 km in diameter was prepared first, noting position, diameter, rim sharpness and completion, nature of underlying surface, and geological age. The subset of those craters 50–400 km in diameter was then used as input to computer programs which identified each ‘family’ of four or more craters, of selected geological age, lying on a circular arc. For comparison, families were also identified for randomized crater models in which the crater spatial density was matched to that on the Moon, either overall or, separately, for mare and highland areas. The observed frequency of lunar arcuate families was statistically highly significantly greater than for the randomized models, for craters classified as either late pre-Imbrian (Nectarian), middle pre-Imbrian, or early pre-Imbrian, as well as for a number of larger age-classes. The lunar families tend to center in specific areas of the Moon: these lie in highlands rather than maria and are different for families of Nectarian craters than for pre-Nectarian. The origin of the arcuate crater groupings is not understood. 相似文献
9.
Abstract— The dimensions of large craters formed by impact are controlled to a large extent by gravity, whereas the volume of impact melt created during the same event is essentially independent of gravity. This “differential scaling” fosters size-dependent changes in the dynamics of impact-crater and basin formation as well as in the final morphologies of the resulting structures. A variety of such effects can be observed in the lunar cratering record, and some predictions can be made on the basis of calculations of impact melting and crater dimensions. Among them are the following: (1) as event magnitude increases, the volume of melt created relative to that of the crater will grow, and more will be retained inside the rim of the crater or basin. (2) The depth of melting will exceed the depth of excavation at diameters that essentially coincide with both the inflection in the depth-diameter trend and the simple-to-complex transition. (3) The volume of melt will exceed that of the transient cavity at a cavity diameter on the order of the diameter of the Moon; this would arguably correspond to a Moon-melting event. (4) Small lunar craters only rarely display exterior flows of impact melt because the relatively small volumes of melt created can become choked with clasts, increasing the melt's viscosity and chilling it rapidly. Larger craters and basins should suffer little from such a process. (5) Deep melting near the projectile's axis of penetration during larger events will yield a progression in central-structure morphology; with growing event magnitude, this sequence should range from single peaks through multiple peaks to peak rings. (6) The minimum depth of origin of central-peak material should coincide with the maximum depth of melting; the main central peak in a crater the size of Tycho should have had a preimpact depth of close to 15 km. 相似文献
10.
Verne R. Oberbeck 《Earth, Moon, and Planets》1973,6(1-2):83-92
The existence of large terrestrial impact crater doublets and Martian crater doublets that have been inferred to be impact
craters demonstrates that simultaneous impact of two or more bodies occurs at nearly the same point on planetary surfaces.
An experimental study of simultaneous impact of two projectiles near one another shows that doublet craters with ridges perpendicular
to the bilateral axis of symmetry result when separation between impact points relative to individual crater diameter is large.
When separation is progressively less, elliptical craters with central ridges and central peaks, circular craters with flat
floors containing ridges and peaks, and circular craters with deep round bottoms are produced. These craters are similar in
structure to many of the large lunar craters. Results suggest that the simultaneous impact of meteoroids near one another
may be an important mechanism for the production of central peaks in large lunar craters. 相似文献
11.
Richard J. Pike 《Earth, Moon, and Planets》1976,15(3-4):463-477
A catalog of crater dimensions that were compiled mostly from the new Apollo-based Lunar Topographic Orthophotomaps is presented in its entirety. Values of crater diameter, depth, rim height, flank width, circularity, and floor diameter (where applicable) are tabulated for a sample of 484 craters on the Moon and 22 craters on Earth. Systematic techniques of mensuration are detailed. The lunar craters range in size from 400 m to 300 km across and include primary impact craters of the main sequence, secondary impact craters, craterlets atop domes and cones, and dark-halo craters. The terrestrial craters are between 10 m and 22.5 km in diameter and were formed by meteorite impact. 相似文献
12.
Ganymede crater dimensions – Implications for central peak and central pit formation and development
Veronica J. Bray Paul M. Schenk H. Jay Melosh Joanna V. Morgan Gareth S. Collins 《Icarus》2012,217(1):115-129
The morphology of impact craters on the icy Galilean satellites differs from craters on rocky bodies. The differences are thought due to the relative weakness of ice and the possible presence of sub-surface water layers. Digital elevation models constructed from Galileo images were used to measure a range of dimensions of craters on the dark and bright terrains of Ganymede. Measurements were made from multiple profiles across each crater, so that natural variation in crater dimensions could be assessed and averaged scaling trends constructed. The additional depth, slope and volume information reported in this work has enabled study of central peak formation and development, and allowed a quantitative assessment of the various theories for central pit formation. We note a possible difference in the size-morphology progression between small craters on icy and silicate bodies, where central peaks occur in small craters before there is any slumping of the crater rim, which is the opposite to the observed sequence on the Moon. Conversely, our crater dimension analyses suggest that the size-morphology progression of large lunar craters from central peak to peak-ring is mirrored on Ganymede, but that the peak-ring is subsequently modified to a central pit morphology. Pit formation may occur via the collapse of surface material into a void left by the gradual release of impact-induced volatiles or the drainage of impact melt into sub-crater fractures. 相似文献
13.
Material is ejected from impact craters in ballastic trajectories; it impacts first near the crater rim and then at progressively greater ranges. Ejecta from craters smaller than approximately 1 km is laid predominantly on top of the surrounding surface. With increasing crater size, however, more and more surrounding surface will be penetrated by secondary cratering action and these preexisting materials will be mixed with primary crater ejecta. Ejecta from large craters and especially basin forming events not only excavate preexisting, local materials, but also are capable of moving large amounts of material away from the crater. Thus mixing and lateral transport give rise to continuous deposits that contain materials from within and outside the primary crater. As a consequence ejecta of basins and large highland craters have eroded and mixed highland materials throughout geologic time and deposited them in depressions inside and between older crater structures.Because lunar mare surfaces contain few large craters, the mare regolith is built up by successive layers of predominantly primary ejecta. In contrast, the lunar highlands are dominated by the effects of large scale craters formed early in lunar history. These effects lead to thick fragmental deposits which are a mixture of primary crater material and local components. These deposits may also properly be named regolith though the term has been traditionally applied only to the relatively thin fine grained surficial deposit on mare and highland terranes generated during the past few billion year. We believe that the surficial highland regolith - generated over long periods of time - rests on massive fragmental units that have been produced during the early lunar history. 相似文献
14.
15.
A. S. Mamakov 《Earth, Moon, and Planets》1979,21(1):19-23
On the basis of heliometric observations of the Moon carried out by the author between 1969–1975 a system of the coordinates of 32 lunar craters has been set up which is independent of the scale and orientation. The zero point of these coordinates has been fixed by the position of the crater Mösting A in accordance with Koziel (1967a, b; 1970). 相似文献
16.
17.
Abstract— Detailed investigations of the microimpact phenomena on Australasian microtektites from four samples from the Central Indian Basin reveal an array of features, such as very low-velocity captured droplets, welded projectiles, angular fragments and dust, craters generated by projectiles defining an oblique trajectory, high-velocity “pitless” craters, and the conventional hypervelocity craters with well-defined central pits and radial and concentric cracks—found commonly on lunar surface materials. The microimpacts are a consequence of interparticle collisions within the ejecta plume (as suggested by their chemistry) subsequent to a major impact and, therefore, reveal processes inherent in an impact-generated plume. All the impact phenomena observed here have taken place while the targets and projectiles were in flight and are therefore secondary impacts in lunar terms. However, some of the resultant features are analogous to lunar micro-craters attributed to primary impacts by cosmic dust. Therefore, ballistic sedimentation on the Moon is likely to contain plume collisional debris as well. 相似文献
18.
Ralph B. Baldwin 《Icarus》1981,45(3):554-563
From estimates of the total masses of tektites in three strewnfields, calculations by Orphal et al. (1980) of the amount of melt that could be ejected from impact craters, and equations relating kinetic energy of impact to crater diameter, it is possible to calculate minimum diameters of lunar craters capable of ejecting the liquid masses that could have formed the various tektite strewnfields. No lunar craters of the requisite sizes have been found that are young enough to correlate with the dates of formations of the strewnfields and it seems clear that the Moon must be eliminated as a source of tektites on the Earth. It is concluded that the associations of the Ivory Coast tektites with the Bosumtwi crater and the moldavites with the Rieskessel are real and the tektites are of terrestrial origin. It follows that if the Ivory Coast tektites came from the 10.5-km-wide Bosumtwi crater, the larger masses in the Australasian and North American strewnfields came from craters 17 km in diameter and between 33 and 65 km in diameter, respectively. No crater has yet been proven to be the parent of the Australisian tektites. The large crater that formed the North American tektites may not yet have been found, although the Mistastin Lake Crater may eventually be proven to be the source. 相似文献
19.
Moon: Origin and evolution of multi-ring basins 总被引：2，自引：0，他引：2
This paper summarizes current data and new observations on lunar basin systems. Parts 1–4 review earlier literature and give new crater-counts used to reconstruct basin histories. Among the results are: basin rings are defined by faults, hills, craters, and/or wrinkle ridges; all of these are inter-related; 2 plays a special role in the ratios of ring diameters; flooding occurred in many basins prior to the formation of the familiar front-side maria; 3 km is a typical depth of lava flooding in basins. Parts 5–11 interpret these results in terms of origin and evolution of basins. Polar concentrations of basins and old, large craters are found (Figures 28 and 29). Basins originated by impacts of very early planetesimals left over from or created during formation of the Moon (6). Concentric fractures were produced by the impacts. Concentric rings developed along fractures during subsequent sagging of the basin into partially melted substrata, along the lines of theory and experiments by Lance and Onat (1962) (Figures 36 and 37). There is marginal empirical evidence that some rings formed significantly after their basins (8). The structure of specific rings depended on the nature of volcanic products extruded. Wrinkle ridges, peak-rings, rings of craters, concentric graben, and central peaks are all consequences of basin-forming evolutionary processes (9, Figure 41), Flooding by lava was a final stage in basin evolution. Lava extruded from concentric ring-faults, wrinkle ridges, and crater and basin rims (10). Mascons are directly correlated with the amount of mare lava, but not correlated with basin age or morphology (11). Section 12 summarizes the results and compares them to those of other authors. 相似文献
20.
Abstract— We have developed a quantitative model for predicting characteristics of ejecta deposits that result from basin‐sized cratering events. This model is based on impact crater scaling equations (Housen, Schmitt, and Holsapple 1983; Holsapple 1993) and the concept of ballistic sedimentation (Oberbeck 1975), and takes into account the size distribution of the individual fragments ejected from the primary crater. Using the model, we can estimate, for an area centered at the chosen location of interest, the average distribution of thicknesses of basin ejecta deposits within the area and the fraction of primary ejecta contained within the deposits. Model estimates of ejecta deposit thicknesses are calibrated using those of the Orientale Basin (Moore, Hodges, and Scott 1974) and of the Ries Basin (Hörz, Ostertag, and Rainey 1983). Observed densities of secondary craters surrounding the Imbrium and Orientale Basins are much lower than the modeled densities. Similarly, crater counts for part of the northern half of the Copernicus secondary cratering field are much lower than the model predicts, and variation in crater densities with distance from Copernicus is less than expected. These results suggest that mutual obliteration erases essentially all secondary craters associated with the debris surge that arises from the impacting primary fragments during ballistic sedimentation; if so, a process other than ballistic sedimentation is needed to produce observable secondary craters. Regardless, our ejecta deposit model can be useful for suggesting provenances of sampled lunar materials, providing information complementary to photogeological and remote sensing interpretations, and as a tool for planning rover traverses (e.g., Haskin et al. 1995, 2002). 相似文献