首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 734 毫秒
1.
This work deals with the optical constant characterization of Titan aerosol analogues or “tholins” produced with the PAMPRE experimental setup and deposited as thin films onto a silicon substrate. Tholins were produced in different N2–CH4 gaseous mixtures to study the effect of the initial methane concentration on their optical constants. The real (n) and imaginary (k) parts of the complex refractive index were determined using the spectroscopic ellipsometry technique in the 370–1000 nm wavelength range. We found that optical constants depend strongly on the methane concentrations of the gas phase in which tholins are produced: imaginary optical index (k) decreases with initial CH4 concentration from 2.3 × 10?2 down to 2.7 × 10?3 at 1000 nm wavelength, while the real optical index (n) increases from 1.48 up to 1.58 at 1000 nm wavelength. The larger absorption in the visible range of tholins produced at lower methane percentage is explained by an increase of the secondary and primary amines signature in the mid-IR absorption. Comparison with results of other tholins and data from Titan observations are presented. We found an agreement between our values obtained with 10% methane concentration, and Imanaka et al. (Imanaka, H., Khare, B.N., Elsila, J.E., Bakes, E.L.O., McKay, C.P., Cruikshank, D.P., Sugita, S., Matsui, T., Zare, R.N. [2004]. Icarus, 168, 344–366) values, in spite of the difference in the analytical method. This confirms a reliability of the optical properties of tholins prepared with various setups but with similar plasma conditions. Our comparison with Titan’s observations also raises a possible inconsistency between the mid-IR aerosol signature by VIMS and CIRS Cassini instruments and the visible Huygens-DISR derived data. The mid-IR VIMS and CIRS signatures are in agreement with an aerosol dominated by an aliphatic carbon content, whereas the important visible absorption derived from the DISR measurement seems to be incompatible with such an important aliphatic content, but more compatible with an amine-rich aerosol.  相似文献   

2.
Complex organic materials may exist as haze layers in the atmosphere of Titan and as dark coloring agents on icy satellite surfaces. Laboratory measurements of optical constants of plausible complex organic materials are necessary for quantitative evaluation from remote sensing observations, and to document the existence of complex organic materials in the extraterrestrial environments. The recent Cassini VIMS and CIRS observations provide new constraints on Titan’s haze properties in the mid-infrared wavelength region. Here, we present the optical constants (2.5–25 μm) of Titan tholins generated with cold plasma irradiation of a N2/CH4 (90/10) gas mixture at pressures of 0.26 mbar, 1.6 mbar, and 23 mbar. Our new optical constants of three types of Titan tholins suggest that no single Titan tholin in this study fulfills all the observational constraints of the Titan haze material. The discrepancy remains a challenge for future modeling and laboratory efforts that aim toward a better understanding of Titan’s haze material.  相似文献   

3.
We utilized aerosol extinction coefficient inferred from Cassini/CIRS spectra in the far and mid infrared region to derive the extinction cross-section near an altitude of 190 km at 15°S (from far-IR) and 20°S (from mid-IR). By comparing the extinction cross section that are derived from observations with theoretical calculations for a fractal aggregate of 3000 monomers, each having a radius of 0.05 μm, and a fractal dimension of 2, we are able to constrain the refractive index of Titan’s aerosol between 70 and 1500 cm?1 (143 and 6.7 μm). As the real and imaginary parts of the refractive index are related by the Kramers–Kronig equation, we apply an iterative process to determine the optical constants in the thermal infrared. The resulting spectral dependence of the imaginary index displays several spectral signatures, some of which are also seen for some Titan’s aerosol analogues (tholins) produced in laboratory experiments. We find that Titan’s aerosols are less absorbent than tholins in the thermal infrared. The most prominent emission bands observed in the mid-infrared are due to CH bending vibrations in methyl and methylene groups. It appears that Titan’s aerosols predominantly display vibrations implying carbon and hydrogen atoms and perhaps marginally nitrogen. In the mid infrared, all the aerosol spectral signatures are observed at three additional latitudes (56°S, 5°N and 30°N) and in the 193–274 km altitude range, which implies that Titan’s aerosols exhibit the same chemical composition in all investigated latitude and altitude regions.  相似文献   

4.
Vertical distributions and spectral characteristics of Titan’s photochemical aerosol and stratospheric ices are determined between 20 and 560 cm?1 (500–18 μm) from the Cassini Composite Infrared Spectrometer (CIRS). Results are obtained for latitudes of 15°N, 15°S, and 58°S, where accurate temperature profiles can be independently determined.In addition, estimates of aerosol and ice abundances at 62°N relative to those at 15°S are derived. Aerosol abundances are comparable at the two latitudes, but stratospheric ices are ～3 times more abundant at 62°N than at 15°S. Generally, nitrile ice clouds (probably HCN and HC3N), as inferred from a composite emission feature at ～160 cm?1, appear to be located over a narrow altitude range in the stratosphere centered at ～90 km. Although most abundant at high northern latitudes, these nitrile ice clouds extend down through low latitudes and into mid southern latitudes, at least as far as 58°S.There is some evidence of a second ice cloud layer at ～60 km altitude at 58°S associated with an emission feature at ～80 cm?1. We speculate that the identify of this cloud may be due to C2H6 ice, which in the vapor phase is the most abundant hydrocarbon (next to CH4) in the stratosphere of Titan.Unlike the highly restricted range of altitudes (50–100 km) associated with organic condensate clouds, Titan’s photochemical aerosol appears to be well-mixed from the surface to the top of the stratosphere near an altitude of 300 km, and the spectral shape does not appear to change between 15°N and 58°S latitude. The ratio of aerosol-to-gas scale heights range from 1.3–2.4 at about 160 km to 1.1–1.4 at 300 km, although there is considerable variability with latitude. The aerosol exhibits a very broad emission feature peaking at ～140 cm?1. Due to its extreme breadth and low wavenumber, we speculate that this feature may be caused by low-energy vibrations of two-dimensional lattice structures of large molecules. Examples of such molecules include polycyclic aromatic hydrocarbons (PAHs) and nitrogenated aromatics.Finally, volume extinction coefficients NχE derived from 15°S CIRS data at a wavelength of λ = 62.5 μm are compared with those derived from the 10°S Huygens Descent Imager/Spectral Radiometer (DISR) data at 1.583 μm. This comparison yields volume extinction coefficient ratios NχE(1.583 μm)/NχE(62.5 μm) of roughly 70 and 20, respectively, for Titan’s aerosol and stratospheric ices. The inferred particle cross-section ratios χE(1.583 μm)/χE(62.5 μm) appear to be consistent with sub-micron size aerosol particles, and effective radii of only a few microns for stratospheric ice cloud particles.  相似文献   

5.
Ocean wave growth on Titan is considered. The classic Sverdrup–Munk theory for terrestrial wave growth is applied to Titan, and is compared with a simple energy balance model that exposes the effect of Titan’s environmental parameters (air density, gravity, and fluid density). These approaches are compared with the only previously-published (semi-empirical) model (Ghafoor, N.A.-L., Zarnecki, J.C., Challenor, P., Srokosz, M.A. [2000] J. Geophys. Res. 105, 12,077–12,091, hereafter G2k), and allow the impact of various parameters such as atmospheric density to be transparently explored.Our model, like G2k, suggests fully-developed significant wave heights on Titan Hs = 0.2 U2, where U is the windspeed (SI units): in dimensionless terms this is rather close to Hs = 0.2 U2/g, a rule of thumb previously noted for terrestrial waves (we find various datasets where the prefactor varies by ～2). It is noted that liquid and air densities affect the growth rate of waves, but not their fully-developed height: for 1 m/s winds wave amplitude reaches 0.15 m (75% of fully-developed) with a fetch of only 1 km, rather faster than predicted by G2k. Liquid viscosity has no major effect on gravity wave growth, but does influence the threshold windspeed at which gravity–capillary waves form in the first place.The model is used to develop predicted ranges for wave height to guide the design of the Titan Mare Explorer (TiME), a proposed Discovery-class mission to float a capsule on Ligeia Mare in 2023. For the expected maximum 1 m/s winds, a significant wave height of 0.2 m and wavelength of ～4 m can be expected. Assuming that wave heights follow Rayleigh statistics as they do on Earth, then given the wave period of ～4 s, individual waves of ～0.6 m might be encountered over a 3 month period.For predicted Titan winds at Kraken Mare, significant wave heights may reach ～0.6 m in the peak of summer but do not exceed the tidal amplitude at its northern end, consistent with the area around Mayda Insula being a tidal flat, while elsewhere on Kraken and Ligeia and at Ontario Lacus, shorelines may be wave- or tidally-dominated, depending on the specific location.  相似文献   

6.
We present the photoionisation modelling of the intrinsic absorber in the bright quasar HS 1603 + 3820. We constructed the broad-band spectral energy distribution using the optical/UV/X-ray observations from different instruments as inputs for the photoionisation calculations. The spectra from the Keck telescope show extremely high Civ to Hi ratios, for the first absorber in system A, named A1. This value, together with high column density of Civ ion, place strong constraints on the photoionisation model. We used two photoionisation codes to derive the hydrogen number density at the cloud illuminated surface. By estimating bolometric luminosity of HS 1603 + 3820 using the typical formula for quasars, we calculated the distance to A1. We could find one photoionization solution, by assuming either a constant density cloud (which was modelled using cloudy), or a stratified cloud (which was modelled using titan), as well as the solar abundances. This model explained both the ionic column density of Civ and the high Civ to Hi ratio. The location of A1 is 0.1 pc, and it is situated even closer to the nucleus than the possible location of the Broad Line Region in this object. The upper limit of the distance is sensitive to the adopted covering factor and the carbon abundance. Photoionisation modelling always prefers dense clouds with the number density n0 = 1010 − 1012 cm−3, which explains intrinsic absorption in HS 1603 + 3820. This number density is of the same order as that in the disk atmosphere at the implied distance of A1. Therefore, our results show that the disk wind that escapes from the outermost accretion disk atmosphere can build up dense absorber in quasars.  相似文献   

7.
We report sensitive Chandra X-ray non-detections of two unusual, luminous Iron Low-Ionization Broad Absorption Line Quasars (FeLoBALs). The observations do detect a non-BAL, wide-binary companion quasar to one of the FeLoBAL quasars. We combine X-ray-derived column density lower limits (assuming solar metallicity) with column densities measured from ultraviolet spectra and CLOUDY photoionization simulations to explore whether constant-density slabs at broad-line region densities can match the physical parameters of these two BAL outflows, and find that they cannot. In the “overlapping-trough” object SDSS J0300+0048, we measure the column density of the X-ray absorbing gas to be NH ? 1.8 × 1024 cm?2. From the presence of Fe ii UV78 absorption but lack of Fe ii UV195/UV196 absorption, we infer the density in that part of the absorbing region to be ne ? 106 cm?3. We do find that a slab of gas at that density might be able to explain this object’s absorption. In the Fe iii-dominant object SDSS J2215–0045, the X-ray absorbing column density of NH ? 3.4 × 1024 cm?2 is consistent with the Fe iii-derived NH ? 2 × 1022 cm?2 provided the ionization parameter is log U > 1.0 for both the ne = 1011 cm?3 and ne = 1012 cm?3 scenarios considered (such densities are required to produce Fe iii absorption without Fe iiabsorption). However, the velocity width of the absorption rules out its being concentrated in a single slab at these densities. Instead, this object’s spectrum can be explained by a low density, high ionization and high temperature disk wind that encounters and ablates higher density, lower ionization Fe iii-emitting clumps.  相似文献   

8.
Titan’s optical and near-IR spectra result primarily from the scattering of sunlight by haze and its absorption by methane. With a column abundance of 92 km amagat (11 times that of Earth), Titan’s atmosphere is optically thick and only ～10% of the incident solar radiation reaches the surface, compared to 57% on Earth. Such a formidable atmosphere obstructs investigations of the moon’s lower troposphere and surface, which are highly sensitive to the radiative transfer treatment of methane absorption and haze scattering. The absorption and scattering characteristics of Titan’s atmosphere have been constrained by the Huygens Probe Descent Imager/Spectral Radiometer (DISR) experiment for conditions at the probe landing site (Tomasko, M.G., Bézard, B., Doose, L., Engel, S., Karkoschka, E. [2008a]. Planet. Space Sci. 56, 624–247; Tomasko, M.G. et al. [2008b]. Planet. Space Sci. 56, 669–707). Cassini’s Visual and Infrared Mapping Spectrometer (VIMS) data indicate that the rest of the atmosphere (except for the polar regions) can be understood with small perturbations in the high haze structure determined at the landing site (Penteado, P.F., Griffith, C.A., Tomasko, M.G., Engel, S., See, C., Doose, L., Baines, K.H., Brown, R.H., Buratti, B.J., Clark, R., Nicholson, P., Sotin, C. [2010]. Icarus 206, 352–365). However the in situ measurements were analyzed with a doubling and adding radiative transfer calculation that differs considerably from the discrete ordinates codes used to interpret remote data from Cassini and ground-based measurements. In addition, the calibration of the VIMS data with respect to the DISR data has not yet been tested. Here, VIMS data of the probe landing site are analyzed with the DISR radiative transfer method and the faster discrete ordinates radiative transfer calculation; both models are consistent (to within 0.3%) and reproduce the scattering and absorption characteristics derived from in situ measurements. Constraints on the atmospheric opacity at wavelengths outside those measured by DISR, that is from 1.6 to 5.0 μm, are derived using clouds as diffuse reflectors in order to derive Titan’s surface albedo to within a few percent error and cloud altitudes to within 5 km error. VIMS spectra of Titan at 2.6–3.2 μm indicate not only spectral features due to CH4 and CH3D (Rannou, P., Cours, T., Le Mouélic, S., Rodriguez, S., Sotin, C., Drossart, P., Brown, R. [2010]. Icarus 208, 850–867), but also a fairly uniform absorption of unknown source, equivalent to the effects of a darkening of the haze to a single scattering albedo of 0.63 ± 0.05. Titan’s 4.8 μm spectrum point to a haze optical depth of 0.2 at that wavelength. Cloud spectra at 2 μm indicate that the far wings of the Voigt profile extend 460 cm?1 from methane line centers. This paper releases the doubling and adding radiative transfer code developed by the DISR team, so that future studies of Titan’s atmosphere and surface are consistent with the findings by the Huygens Probe. We derive the surface albedo at eight spectral regions of the 8 × 12 km2 area surrounding the Huygens landing site. Within the 0.4–1.6 μm spectral region our surface albedos match DISR measurements, indicating that DISR and VIMS measurements are consistently calibrated. These values together with albedos at longer 1.9–5.0 μm wavelengths, not sampled by DISR, resemble a dark version of the spectrum of Ganymede’s icy leading hemisphere. The eight surface albedos of the landing site are consistent with, but not deterministic of, exposed water ice with dark impurities.  相似文献   

9.
We present a multicolor photometry for the eclipsing binary WY Hydrae, observed on four nights of 2008 December. From our new observations and Carr’s data, the photometric solutions were deduced by using the updated W–D program. The results show that WY Hya is a detached binary with a mass ratio of q = 0.970(±0.005).By analyzing the O–C curve, it is found that there exists either a continuous period increase or a cyclic variation. From Eq. (2), the orbital period of WY Hya secularly increases at a rate of dP/dt = +3.56(±0.37) × 10?7 days/yr, which may be interpreted by some mass transfer for the near-contact configuration or tidal dissipation. From Eq. (3), the period and semi-amplitude of the periodic oscillation are P3 = 95.4(±4.2) yr and A = 0d.0087(±0d.0003), respectively. This may be likely attributed by light-time effect via the presence of the assumed third body. Assumed in the coplanar orbit with the binary, the mass of the third body should be M3 = 0.18 M⊙. If the unseen additional companion exists, it will extract angular momentum from the binary system. Finally, WY Hya with high fill-out factors (i.e., f1,2 > 80%), may evolve into a semi-detached configuration.  相似文献   

10.
We present spectral and spatial information for major volatile species in Comet 10P/Tempel 2, based on high-dispersion infrared spectra acquired on UT 2010 July 26 (heliocentric distance Rh = 1.44 AU) and September 18 (Rh = 1.62 AU), following the comet’s perihelion passage on UT 2010 July 04. The total production rate for water on July 26 was (1.90 ± 0.12) × 1028 molecules s?1, and abundances of six trace gases (relative to water) were: CH3OH (1.58% ± 0.23%), C2H6 (0.39% ± 0.04%), NH3 (0.83% ± 0.20%), and HCN (0.13% ± 0.02%). A detailed analysis of intensities for water emission lines provided a rotational temperature of 35 ± 3 K. The mean OPR is consistent with nuclear spin populations in statistical equilibrium (OPR = 3.01 ± 0.18), and the (1σ) lower bound corresponds to a spin temperature >38 K. Our measurements were contemporaneous with a jet-like feature observed at optical wavelengths. The spatial profiles of four primary volatiles display strong enhancements in the jet direction, which favors release from a localized vent on the nucleus. The measured IR continuum is much more sharply peaked and is consistent with a dominant contribution from the nucleus itself. The peak intensities for H2O, CH3OH, and C2H6 are offset by ～200 km in the jet direction, suggesting the possible existence of a distributed source, such as the release of icy grains that subsequently sublimed in the coma. On UT September 18, no obvious emission lines were present in our spectra, nevertheless we obtained a 3σ upper limit Q(H2O) < 2.86 × 1027 molecules s?1.  相似文献   

11.
The South Equatorial Belt (SEB) of Jupiter is known to alternate its appearance at visible wavelengths from a classical belt-like band most of the time to a short-lived zone-like aspect which is called a “fade” of the belt, hereafter SEBF. The albedo change of the SEB is due to a change in the structure and properties of the clouds and upper hazes. Recent works based on infrared observations of the last SEBF have shown that the aerosol density below 1 bar increased in parallel with the reflectivity change. However, the nature of the change in the upper clouds and hazes that produces the visible reflectivity change and whether or not this reflectivity change is accompanied by a change in the winds at the upper cloud level remained unknown. In this paper we focus in the near ultraviolet to near infrared reflected sunlight (255–953 nm) to address these two issues. We characterize the vertical cloud structure above the ammonia condensation level from Hubble Space Telescope images, and the zonal wind velocities from long-term high-quality images coming from the International Outer Planet Watch database, both during the SEB and SEBF phases. We show that reflectivity changes do not happen simultaneously in this wavelength range, but they start earlier in the most deep-sensing filters and end in 2010 with just minor changes in those sensing the highest particle layers. Our models require a substantial increase of the optical thickness of the cloud deck at 1.0 ± 0.4 bar from τcloud = 6 ± 2 in July 2009 (SEB phase) to semiinfinite at visual wavelengths in 2010 (SEBF). Upper tropospheric particles (～240–1400 mbar) are also required to become substantially reflectant and their single scattering albedo in the blue changes from ?0 = 0.905 ± 0.005 in November 2009 to ?0 = 0.95 ± 0.01 in June 2010. No significant changes were found in the cloud top heights or in the particle density of the tropospheric haze. The disturbance travels from the levels below ～3 bar to a level about 400 ± 100 mbar. We derive an upward velocity of 0.15 ± 0.05 cm/s, in agreement with a diffusive process in Jupiter’s upper troposphere requiring a mean eddy coefficient K ～ 8 × 105 cm2 s?1. On the other hand, cloud tracking on the IOPW imaging showed no significant changes in the zonal wind profile between the SEB and SEBF stages. As in other visually huge changes in Jupiter’s cloud morphology and structure, the wind profile remains robust, possibly indicating a deeply rooted dynamical regime.  相似文献   

12.
Titan’s moment of inertia (MoI), estimated from the quadrupole gravity field measured by the Cassini spacecraft, is 0.342, which has been interpreted as evidence of a partially differentiated internal mass distribution. It is shown here that the observed MoI is equally consistent with a fully differentiated internal structure comprising a shell of water ice overlying a low-density silicate core; depending on the chemistry of Titan’s subsurface ocean, the core radius is between 1980 and 2120 km, and its uncompressed density is 2570–2460 kg m?3, suggestive of a hydrated CI carbonaceous chondrite mineralogy. Both the partially differentiated and fully differentiated hydrated core models constrain the deep interior to be several hundred degrees cooler than previously thought. I propose that Titan has a warm wet core below, or buffered at, the high-pressure dehydration temperature of its hydrous constituents, and that many of the gases evolved by thermochemical and radiogenic processes in the core (such as CH4 and 40Ar, respectively) diffuse into the icy mantle to form clathrate hydrates, which in turn may provide a comparatively impermeable barrier to further diffusion. Hence we should not necessarily expect to see a strong isotopic signature of serpentinization in Titan’s atmosphere.  相似文献   

13.
《New Astronomy》2007,12(6):435-440
A detailed analysis of emission lines of carbon-like silicon reveals that some ratios of n = 3 → 2 line intensities are sensitive to the electron density, ne. The ratio between two groups of 3d → 2p transition lines of 55.246 Å and 55.346 Å provides a good diagnostic of ne because of the combined characteristic of sensitivity to electron density and relative insensitivity to temperature. From this ratio, a lower limit of the electron density of 0.6 × 108 cm−3 was set for Procyon, which is consistent with the values constrained by C V and Si X emission lines. Significant discrepancies were found between theoretical predictions and observations for the 3s → 2p lines relative to 3d → 2p lines in Procyon, recently measured using the Chandra high-resolution transmission grating instrument. The difference of more than a factor of 3, cannot be explained by uncertainties of atomic data. Ness and co-workers also suggested that the effect of opacity appeared not to be a major factor for the discrepancy. For the 3s → 2p line at 61.611 Å, present work indicates that the large discrepancy may be from the contamination of a S VIII line at 61.645 Å. For lines at 61.702 and 61.846 Å, we suggest that the discrepancies may be attributed to contaminations by currently yet-unknown spectral lines.  相似文献   

14.
  相似文献   

15.
《Planetary and Space Science》2007,55(12):1741-1756
The dynamics of Venus’ mesosphere (70–110 km) is characterized by the superposition of two different wind regimes: (1) Venus’ retrograde superrotation; (2) a sub-solar to anti-solar (SS–AS) flow pattern, driven by solar EUV heating on the sunlit hemisphere. Here, we report on new ground-based velocity measurements in the lower part of the mesosphere. We took advantage of two essentially symmetric Venus elongations in 2001 and 2002 to perform high-resolution Doppler spectroscopy (R=120,000) in 12C16O2 visible lines of the 5ν3 band and in a few solar Fraunhofer lines near 8700 Å. These measurements, mapped over several points on Venus’ illuminated hemisphere, probe the region of cloud tops. More precisely, the solar Fraunhofer lines sample levels a few kilometers below the UV features (i.e. near ∼67 km), while the CO2 lines probe an altitude higher by about 7 km. The wind field over Venus’ disk is retrieved with an rms uncertainty of 15–25 m s−1 on individual measurements. Kinematical fit to a one- or two-component circulation model indicates the dominance of the zonal retrograde flow with a mean equatorial velocity of ∼75 m s−1, exhibiting very strong day-to-day variations (±65 m s−1). Results are very consistent for the two kinds of lines, suggesting a negligible vertical wind shear over 67–74 km. The SS–AS flow is not detected in single-day observations, but combining the results from all data suggests that this component may invade the lower mesosphere with a ∼40 m s−1 velocity.  相似文献   

16.
This study presents the absolute parameters of the contact binary system V376 And. CCD photometric observations were made at the Çanakkale Onsekiz Mart University Observatory in 2004. The instrumental magnitudes of all observed stars were converted into standard magnitudes. New BV light curves of the system were analysed using the Wilson–Devinney method supplemented with a Monte Carlo type algorithm. Since there are large asymmetries between maxima (i.e., O’Connell effect) in these light curves, two different models (one with a cool spot and one with a hot spot) were applied to the photometric data. The best fit, which was obtained with a large hot spot on the secondary component, gives V376 And as an A sub-type contact binary in poor thermal contact and a small value of the filling factor (f ≈ 0.07). Combining the solutions of our light curves and Rucinski et al. (2001)’s radial velocity curves, the following absolute parameters of the components were determined: M1 = 2.44 ± 0.04 M⊙, M2 = 0.74 ± 0.03 M⊙, R1 = 2.60 ± 0.03 R⊙, R2 = 1.51 ± 0.02 R⊙, L1 = 40 ± 4 L⊙ and L2 = 5 ± 1 L⊙. We also discuss the evolution of the system, which appears to have an age of 1.6 Gyr. The distance to V376 And was calculated as 230 ± 20 pc from this analysis, taking into account interstellar extinction.  相似文献   

17.
We present the results of the study of the contact binary system BO CVn. We have obtained physical parameters of the components based on combined analysis of new, multi-color light curves and spectroscopic mass ratio. This is the first time the latter has been determined for this object. We derived the contact configuration for the system with a very high filling factor of about 88%. We were able to reproduce the observed light curve, namely the flat bottom of the secondary minimum, only if a third light has been added into the list of free parameters. The resulting third light contribution is significant, about 20–24%, while the absolute parameters of components are: M1 = 1.16, M2 = 0.39, R1 = 1.62 and R2 = 1.00 (in solar units).The O-C diagram shows an upward parabola which, under the conservative mass transfer assumption, would correspond to a mass transfer rate of dM/dt = 6.3 × 10?8M⊙/yr, matter being transferred from the less massive component to the more massive one. No cyclic, short-period variations have been found in the O-C diagram (but longer-term variations remain a possibility).  相似文献   

18.
  相似文献   

19.
The neutral, singly, doubly and triply ionized mercury (Hg I–IV, respectively) spectral line shapes and line center positions have been investigated in the laboratory helium plasma at electron densities ranging between 9.3 × 1022 m?3 and 1.93 × 1023 m?3 and electron temperatures around 19,500 K, both interesting for astrophysics. The mercury (natural isotope composition) atoms were sputtered from the cylindrical amalgamated gold plates located in the homogenous part of the pulsed helium discharge operating at a pressure of 665 Pa in a flowing regime. The mercury spectral line profiles were recorded using the McPherson model 209 spectrograph and the Andor ICCD camera as the detection system. This research presents Stark broadening parameters, the width (W) and the shift (d), of one Hg I, 19 Hg II, 6 Hg III and 4 Hg IV lines, not investigated so far. Our experimental W values were compared with the data calculated applying various approaches. The shape and intensity of astrophysically important 398.4 nm Hg II spectral line was discussed taking into account the isotope shift, hyperfine structure and Penning effects. At the mentioned plasma parameters the Stark broadening is found to be a main line broadening mechanism of the lines (λ > 200 nm) in the Hg I–IV spectra.  相似文献   

20.
We present observations of the O2(a1Δg) nightglow at 1.27 μm on Mars using the SPICAM IR spectrometer onboard of the Mars Express orbiter. In contrast to the O2(a1Δg) dayglow that results from the ozone photodissociation, the O2(a1Δg) nightglow is a product of the recombination of O atoms formed by CO2 photolysis on the dayside at altitudes higher than 80 km and transported downward above the winter pole by the Hadley circulation. The first detections of the O2(a1Δg) nightglow in 2010 indicate that it is about two order of magnitude less intense than the dayglow (Bertaux, J.-L., Gondet, B., Bibring, J.-P., Montmessin, F., Lefèvre, F. [2010]. Bull. Am. Astron. Soc. 42, 1040; Clancy et al. [2010]. Bull. Am. Astron. Soc. 42, 1041). SPICAM IR sounds the martian atmosphere in the near-IR range (1–1.7 μm) with the spectral resolution of 3.5 cm?1 in nadir, limb and solar occultation modes. In 2010 the vertical profiles of the O2(a1Δg) nightside emission have been obtained near the South Pole at latitudes of 82–83°S for two sequences of observations: Ls = 111–120° and Ls = 152–165°. The altitude of the emission maximum varied from 45 km on Ls = 111–120° to 38–49 km on Ls = 152–165°. Averaged vertically integrated intensity of the emission at these latitudes has shown an increase from 0.22 to 0.35 MR. Those values of total vertical emission rate are consistent with the OMEGA observations on Mars-Express in 2010. The estimated density of oxygen atoms at altitudes from 50 to 65 km varies from 1.5 × 1011 to 2.5 × 1011 cm?3. Comparison with the LMD general circulation model with photochemistry (Lefèvre, F., Lebonnois, S., Montmessin, F., Forget, F. [2004]. J. Geophys. Res. 109, E07004; Lefèvre et al. [2008]. Nature 454, 971–975) shows that the model reproduces fairly well the O2(a1Δg) emission layer observed by SPICAM when the large field of view (>20 km on the limb) of the instrument is taken into account.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号