首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Wudalianchi volcanic field, located in northeast China, consists of 14 Quaternary volcanoes with each volcano as a steep-sided scoria cone surrounded by gently sloping lava flows. Each cone is topped with a bowl-shaped or funnel-shaped crater. The volcanic cones are constructed by the accumulation of tephra and other ejecta. In this paper, their geologic features have been investigated and compared with some Martian volcanic features at Ascraeus Mons volcanoes observed on images obtained from High-Resolution Imaging Science Experiments (HiRISE), Mars Orbiter Camera (MOC), Context Imager (CTX) and Thermal Emission Imaging System (THEMIS). The results show that both Wudalianchi and Ascraeus Mons volcanoes are basaltic, share similar eruptive and geomorphologic features and eruptive styles, and have experienced multiple eruptive phases, in spite of the significant differences in their dimension and size. Both also show a variety of eruptive styles, such as fissure and central venting, tube-fed and channel-fed lava flows, and probably pyroclastic deposits. Three volcanic events are recognized at Ascraeus Mons, including an early phase of shield construction, a middle eruptive phase forming a low lava shield, and the last stage with aprons mantling both NE and SW flanks. We suggest that magma generation at both Wudalianchi and Ascraeus Mons might have been facilitated by an upwelling mantle plume or upwelling of asthenospheric mantle, and a deep-seated fault zone might have controlled magma emplacement and subsequent eruptions in Ascraeus Mons as observed in the Wudalianchi field, where the volcanoes are constructed along the northeast-striking faults. Fumarolic cones produced by water/magma interaction at the Wudalianchi volcanic field may also serve as an analogue for the pseudocraters identified at Isidis and Cerberus Planitia on Mars, suggesting existence of frozen water in the ground on Mars during Martian volcanic eruptions.  相似文献   

2.
The Imbrium sculpture texture, a distinctive ridged and furrowed pattern radial to the Imbrium basin and seen in other basins, has long been debated as to its origin (internal, formed by basin-related fractures; external, related to ejecta patterns). To test for the presence of deep radial fractures on the moon, the azimuth and length of linear rim segments of twenty-four post-Imbrium-basin craters were measured. Linear segments of crater rims parallel preexisting fracture patterns in terrestrial craters floored in an indurated substrate. Craters forming in a terrain containing pervasive fractures radial to Imbrium should show evidence of this tectonic influence by forming rim crest segments (terrace scarps) preferentially along these directions. No systematic relation of these segments with Imbrium radial structure was found. This suggests that the surface radial grooves may not extend to depth. The relatively young Orientale basin shows two types of radial structures: (1) pervasive subparallel ridges and furrows formed by a spectrum of sizes of secondary crater chains emanating from the main crater, and from flowage of material during secondary cratering; (2) parallel, generally radial ridges which appear to have formed on top of outward flows of debris. These types of radial textures (both depositional and erosional) appear unrelated to major faults or fractures. Therefore, these two lines of evidence suggest that much of the Imbrium-type sculpture surrounding major lunar basins is sedimentary, rather than tectonic, in origin.  相似文献   

3.
Estimates of lava volumes on planetary surfaces provide important data on the lava flooding history and thermal evolution of a planet. Lack of information concerning the configuration of the topography prior to volcanic flooding requires the use of a variety of techniques to estimate lava thicknesses and volumes. A technique is described and developed which provides volume estimates by artificially flooding unflooded lunar topography characteristic of certain geological environments, and tracking the area covered, lava thicknesses, and lava volumes. Comparisons of map patterns of incompletely buried topography in these artificially flooded areas are then made to lava-flooded topography on the Moon in order to estimate the actual lava volumes.This technique is applied to two areas related to lunar impact basins; the relatively unflooded Orientale basin, and the Archimedes-Apennine Bench region of the Imbrium basin. Artificially flooding the Orientale basin to the Cordillera Mountains (outer basin ring) produces a lava fill geometry with two components; (a) thebasin interior (within the inner Rook ring) where the area covered is small but lava thicknesses are large (6–8 km), and (b) thebasin, edges where larger areas are covered but thicknesses are less, averaging about 2 km. Detailed examination of the Archimedes-Apennine Bench area (Imbrium basin edge) also shows average thicknesses in this region of basins of approximately 2 km.On the basis of these analyses it is concluded that early flooding of the basin interior places a major load on the lithosphere in the same geographic region where mascon gravity anomalies are concentrated. Mare ridges and arches are concentrated at the outer edge of the region of thickset fill and appear to be related to tectonic activity accompanying basin loading and downwarping. Lava thicknesses in most areas of flooded, impact basins (>2 km) exceed the thickness of lava where vertical mixing of underlying non-mare material is possible. Thus, vertical mixing is not likely to have been an important process in mare deposits within flooded impact basins. Thickness estimates derived from this technique exceed those derived from the morphometry of buried or partially buried craters by at least a factor of two. Examination of the assumptions employed in the latter technique show several sources of variability (e.g., initial rim height variability in a fresh crater) which may result in significant underestimation of lava thicknesses.  相似文献   

4.
The Marius Hills region, a volcanic plateau in Oceanus Procellarum, contains numerous rilles, rille-like structures, and chains of elongate craters. Most of these structures characteristically: (1) originate on or near irregular shaped craters associated with features previously interpreted as volcanic domes, (2) trend downslope onto Plateau Plains, (3) generally taper in width and become shallower, (4) are often discountinuous, (5) occupy the center, or apparent crest of a broad ridge, (6) may contain cut-off branches and distributary structures, and (7) may have local reversals in longitudinal slope. Structures having these characteristics are interpreted to be lava channels or partly collapsed lava tubes. Terrestrial lava tubes form exclusively, and commonly, in fluid basalt flows. Recent evidence indicates that viscosities of lunar mare basalt lava flows were conducive for lava tube formation.Terrestrial analogs are offered for structures described in the Marius Hills. The analogs are comparable in qualitative and quantitative geomorphic aspects, excluding that of width. Scaling consideration of lunar reduced gravity accounts for increased width of the lunar structures. Linear and curvilinear rilles trending along equal elevations are interpreted to result from fracturing or faulting.  相似文献   

5.
Several types of spatially associated landforms in the southern Utopia Planitia highland-lowland boundary (HLB) plain appear to have resulted from localized geologic activity, including (1) fractured rises, (2) elliptical mounds, (3) pitted cones with emanating lobate materials, and (4) isolated and coalesced cavi (depressions). Stratigraphic analysis indicates these features are Hesperian or younger and may be associated with resurfacing that preferentially destroyed smaller (<8 km diameter) impact craters. Based on landform geomorphologies and spatial distributions, the documented features do not appear to be specifically related to igneous or periglacial processes or the back-wasting and erosion of the HLB scarp. We propose that these features are genetically related to and formed by sedimentary (mud) diapirs that ascended from zones of regionally confined, poorly consolidated, and mechanically weak material. We note morphologic similarities between the mounds and pitted cones of the southern Utopia boundary plain and terrestrial mud volcanoes in the Absheron Peninsula, Azerbaijan. These analogs provide a context for understanding the geological environments and processes that supported mud diapir-related modification of the HLB. In southern Utopia, mud diapirs near the Elysium volcanic edifice may have resulted in laccolith-like intrusions that produced the fractured rises, while in the central boundary plain mud diapirs could have extruded to form pitted cones, mounds, and lobate flows, perhaps related to compressional stresses that account for wrinkle ridges. The removal of material a few kilometers deep by diapiric processes may have resulted in subsidence and deformation of surface materials to form widespread cavi. Collectively, these inferences suggest that sedimentary diapirism and mud volcanism as well as related surface deformations could have been the dominant Hesperian mechanisms that altered the regional boundary plain. We discuss a model in which detritus would have accumulated thickly in the annular spaces between impact-generated structural rings of Utopia basin. We envision that these materials, and perhaps buried ejecta of Utopia basin, contained volatile-rich, low-density material that could provide the source material for the postulated sedimentary diapirs. Thick, water-rich, low-density sediments buried elsewhere along the HLB and within the lowland plains may account for similar landforms and resurfacing histories.  相似文献   

6.
We produced a regional geologic map of the Zal region of Io's antijovian hemisphere using Galileo mission data. We discuss the geologic features, summarize the map units and structures that are present, discuss the nature of volcanic activity, and present an analysis of the volcanic, tectonic, and gradational processes that affect the region. The Zal region consists of five primary types of geologic materials: plains, mountains, paterae floors, flows, and diffuse deposits. The flows and patera floors are similar, but are subdivided based on uncertainties regarding emplacement environments and mechanisms. The Zal region includes two hotspots detected by Galileo: one along the western scarp of the Zal Patera volcano and one at the Rustam Patera volcano (name submitted to IAU). A third hotspot at the nearby At'am Patera volcano (name submitted to IAU) is the source of diffuse and pyroclastic materials that blanket north Zal Mons. The western bounding scarp of Zal Patera is the location of a fissure vent that is the source of multiple silicate lava flows. The floor of Zal Patera has been partially resurfaced by dark lava flows, although portions of the patera floor appear bright and unchanged during the Galileo mission. This suggests that the floor did not undergo complete resurfacing as a flooding lava lake but does contain a compound flow field. Mountain materials exhibit stages of degradation; lineated material degrades into mottled material. We have explored the possibility that north and south Zal Mons were originally one structure. We propose that strike-slip faulting and subsequent rifting separated the mountain units, opened a fissure which serves as a vent for lava flow, and created a depression which, by further extension during the rifting event, became Zal Patera. With comparison to other regional maps of Io, this work provides insight into the general geologic evolution of Io.  相似文献   

7.
The Duolun basin, which is located in Inner Mongolia, China, has been proposed to be an impact structure with an apparent rim diameter of about 70, or even 170 km. The designation as an impact structure was based on its nearly circular topography, consisting of an annular moat that surrounds an inner hummocky region, and the widespread occurrences of various igneous rocks, polymict breccias, and deformed crustal rocks. Critical shock metamorphic evidence is not available to support the impact hypothesis. We conducted two independent reconnaissance field surveys to this area and studied the lithology both within and outside of the ring structure. We collected samples from all lithologies that might contain evidence of shock metamorphism as suggested by their locations, especially those sharing similar appearances with impact breccias, suevites, impact melt rocks, and shatter cones. Field investigation, together with thin‐section examination, discovered that the suspected impact melt rocks are actually Early Cretaceous and Late Jurassic lava flows and pyroclastic deposits of rhyolitic to trachytic compositions, and the interpreted impact glass is typical volcanic glass. Petrographic analyses of all the samples reveal no indications for shock metamorphic overprint. All these lines of evidence suggest that the Duolun basin was not formed through impact cratering. The structural deformation and spatial distribution pattern of the igneous rocks suggest that the Duolun basin is most likely a Jurassic–Cretaceous complex rhyolite caldera system that has been partly filled with sediments forming an annular basin, followed by resurgent doming of the central area.  相似文献   

8.
We photogeologically mapped the SP Mountain region of the San Francisco Volcanic Field in northern Arizona, USA to evaluate and improve the fidelity of approaches used in geologic mapping of Mars. This test site, which was previously mapped in the field, is chiefly composed of Late Cenozoic cinder cones, lava flows, and alluvium perched on Permian limestone of the Kaibab Formation. Faulting and folding has deformed the older rocks and some of the volcanic materials, and fluvial erosion has carved drainage systems and deposited alluvium. These geologic materials and their formational and modificational histories are similar to those for regions of the Martian surface. We independently prepared four geologic maps using topographic and image data at resolutions that mimic those that are commonly used to map the geology of Mars (where consideration was included for the fact that Martian features such as lava flows are commonly much larger than their terrestrial counterparts). We primarily based our map units and stratigraphic relations on geomorphology, color contrasts, and cross-cutting relationships. Afterward, we compared our results with previously published field-based mapping results, including detailed analyses of the stratigraphy and of the spatial overlap and proximity of the field-based vs. remote-based (photogeologic) map units, contacts, and structures. Results of these analyses provide insights into how to optimize the photogeologic mapping of Mars (and, by extension, other remotely observed planetary surfaces). We recommend the following: (1) photogeologic mapping as an excellent approach to recovering the general geology of a region, along with examination of local, high-resolution datasets to gain insights into the complexity of the geology at outcrop scales; (2) delineating volcanic vents and lava-flow sequences conservatively and understanding that flow abutment and flow overlap are difficult to distinguish in remote data sets; (3) taking care to understand that surficial materials (such as alluvium and volcanic ash deposits) are likely to be under-mapped yet are important because they obscure underlying units and contacts; (4) where possible, mapping multiple contact and structure types based on their varying certainty and exposure that reflect the perceived accuracy of the linework; (5) reviewing the regional context and searching for evidence of geologic activity that may have affected the map area yet for which evidence within the map area may be absent; and (6) for multi-authored maps, collectively analyzing the mapping relations, approaches, and methods throughout the duration of the mapping project with the objective of achieving a solid, harmonious product.  相似文献   

9.
HiRISE has imaged a graben wall on the western flank of Arsia Mons volcano, Mars. This graben is ∼3×16 km in plan-view size and is oriented almost perpendicular to the general volcano slope. We have identified 1318 individual sub-horizontal layers, which we interpret to be lava flows, in the 885 m high, nearly vertical, eastern wall of this graben. The average and median outcrop widths of each layer are 149 and 85 m, respectively. No layers extend >1.72 km across the width of the section, arguing against these being either areally-extensive ash or paleo-glacial deposits, which has implications for the reoccurrence interval of glacial events and/or the long-term magma production rate of the volcano. Measurements (N=118) made at a 100-m spacing across the width of the section reveal that there are, on average, 17.3 layers at each location. This implies an average layer thickness of ∼51 m. Locally, however, as many as 7 layers can be counted within a 70 m-high part of the section, implying, if these layers are indeed lava flows, that Arsia Mons occasionally erupted flows that were only ∼10 m thick.  相似文献   

10.
James C. Pechmann 《Icarus》1980,42(2):185-210
Viking photographs have revealed extraordinary systems of crudely polygonal troughs in three different areas of the northern plains of Mars. Trough widths average 200–800 m and average trough spacing is 5–10 km. The widest troughs have flat floors and steep sides which suggest that they are either grabens or tension cracks which have been partially filled. The following three arguments support the garben interpretation: (1) Two clear examples of vertical offsets along trough walls indicate that the troughs formed by downdropping of the floors. (2) Troughs similar in scale and morphology to those of the Martian northern plains form concentric and radial patterns in the Caloris Basin on Mercury. Most likely, they are extensional fractures or grabens resulting from uplift of the basin floor (Strom et al., 1975). The Caloris analogy suggests that the troughs on Mars are similar tectonic features related either to uplift or expansion of the planet. Fourteen rose diagrams of trough azimuths in southeastern Acidalia Planita show that locally they exhibit preferred orientations roughly parallel to the topographic contours, but overall there is no strong regional pattern. (3) The scale of tension crack systems is limited by the depth of fracturing because the extent of stress relief perpendicular to a crack is proportional to the crack depth. Observations of terrestrial tension cracks suggest a lower limit on crack depths of about one-tenth of the average spacing. Thus, if the Martian troughs are tension cracks, they would be expected to have depths of at least 500–1000 m. Mechanical considerations indicate that it is difficult to generate such deep cracks by surficial tension due to thermal cooling and contraction in permafrost, desiccation, or cooling of lava flows. Deep-seated tension of tectonic origin generally results in normal faults and not tension cracks.  相似文献   

11.
The modeling of thermal emission from active lava flows must account for the cooling of the lava after solidification. Models of lava cooling applied to data collected by the Galileo spacecraft have, until now, not taken this into consideration. This is a flaw as lava flows on Io are thought to be relatively thin with a range in thickness from ∼1 to 13 m. Once a flow is completely solidified (a rapid process on a geological time scale), the surface cools faster than the surface of a partially molten flow. Cooling via the base of the lava flow is also important and accelerates the solidification of the flow compared to the rate for the ‘semi-infinite’ approximation (which is only valid for very deep lava bodies). We introduce a new model which incorporates the solidification and basal cooling features. This model gives a superior reproduction of the cooling of the 1997 Pillan lava flows on Io observed by the Galileo spacecraft. We also use the new model to determine what observations are necessary to constrain lava emplacement style at Loki Patera. Flows exhibit different cooling profiles from that expected from a lava lake. We model cooling with a finite-element code and make quantitative predictions for the behavior of lava flows and other lava bodies that can be tested against observations both on Io and Earth. For example, a 10-m-thick ultramafic flow, like those emplaced at Pillan Patera in 1997, solidifies in ∼450 days (at which point the surface temperature has cooled to ∼280 K) and takes another 390 days to cool to 249 K. Observations over a sufficient period of time reveal divergent cooling trends for different lava bodies [examples: lava flows and lava lakes have different cooling trends after the flow has solidified (flows cool faster)]. Thin flows solidify and cool faster than flows of greater thickness. The model can therefore be used as a diagnostic tool for constraining possible emplacement mechanisms and compositions of bodies of lava in remote-sensing data.  相似文献   

12.
Abstract— Shatter cones have been described from many meteorite impact structures and are widely regarded as a diagnostic macroscopic recognition feature for impact. However, the origin of this meso‐ to macroscopic striated fracture phenomenon has not yet been satisfactorily resolved, and the timing of shatter cone formation in the cratering process still remains enigmatic. Here, previous results from studies of shatter cones from the Vredefort impact structure and other impact structures are discussed in the light of new field observations made in the Vredefort Dome. Contrary to earlier claims, Vredefort cone fractures do not show uniform apex orientations at any given outcrop, nor do small cones show a pattern consistent with the previously postulated “master cone” concept. Simple back‐rotation of impact‐rotated strata to a horizontal pre‐impact position also does not lead to a uniform centripetal‐upward orientation of the cone apices. Striation patterns on the cone surfaces are variable, ranging from the typically diverging pattern branching off the cone apex to subparallel‐to‐parallel patterns on almost flat surfaces. Striation angles on shatter cones do not increase with distance from the center of the dome, as alleged in the literature. Instead, a range of striation angles is measured on individual shatter cones from a specific outcrop. New observations on small‐scale structures in the collar around the Vredefort Dome confirm the relationship of shatter cones with subparallel sets of curviplanar fractures (so‐called multipli‐striated joint sets, MSJS). Pervasive, meter‐scale tensile fractures cross‐cut shatter cones and appear to have formed after the closely spaced MSJ‐type fractures. The results of this study indicate that none of the existing hypotheses for the formation of shatter cones are currently able to adequately explain all characteristics of this fracturing phenomenon. Therefore, we favor a combination of aspects of different hypotheses that includes the interaction of elastic waves, as supported by numerical modeling results and which reasonably explains the variety of shatter cone shapes, the range of striation geometries and angles, and the relationship of closely spaced fracture systems with the striated surfaces. In the light of the currently available theoretical basis for the formation of shatter cones, the results of this investigation lead to the conclusion that shatter cones are tensile fractures and might have formed during shock unloading, after the passage of the shock wave through the target rocks.  相似文献   

13.
Mare basalts collected at the Apollo 15 landing site are classified as belonging to either the quartz-normative suite or the olivine-normative suite, based on differences in whole-rock major element chemistry. A wide range of textures are displayed within samples from both suites, which provide insight into eruption processes on the Moon. Here we use crystal size distribution (CSD) analysis and spatial distribution pattern (SDP) analysis of pyroxene, olivine, and plagioclase crystals in eight Apollo 15 mare basalt samples to investigate the crystallization and emplacement of the quartz-normative and olivine-normative suites. In general, our results show similarities between the CSDs and SDPs for both mare basalt suites. However, we also report two distinct groups of pyroxene CSD trends that likely represent samples with common cooling histories, originating from comparable depths within respective olivine-normative and quartz-normative lava flows. We use our results to determine the relative depths of samples within the lava flows at the Apollo 15 landing site.  相似文献   

14.
The lunar surface is bathed in a variety of impacting particles originating from the solar wind, solar flares, and galactic cosmic rays. These particles can become embedded in the regolith and/or produce a range of other molecules as they pass through the target material. The Moon therefore contains a record of the variability of the solar and galactic particle fluxes through time. To obtain useful temporal snapshots of these processes, discrete regolith units must be shielded from continued bombardment that would rewrite the record over time. One mechanism for achieving this preservation is the burial of a regolith deposit by a later lava flow. The archival value of such deposits sandwiched between lava layers is enhanced by the fact that both the under- and over-lying lava can be dated by radiometric techniques, thereby precisely defining the age of the regolith layer and the geologic record contained therein. The implanted volatile species would be vulnerable to outgassing by the heat of the over-lying flow, at temperatures exceeding 300-700 °C. However, the insulating properties of the finely particulate regolith would restrict significant heating to shallow depths. We have therefore modeled the heat transfer between lunar mare basalt lavas and the regolith in order to establish the range of depths below which implanted volatiles would be preserved. We find that the full suite of solar wind volatiles, consisting predominantly of H and He, would survive at depths of ∼13-290 cm (for 1-10 m thick lava flows, respectively). A substantial amount of CO, CO2, N2 and Xe would be preserved at depths as shallow as 3.7 cm beneath meter-thick flows. Given typical regolith accumulation rates during mare volcanism, the optimal localities for collecting viable solar wind samples would involve stacks of thin mare lava flows emplaced a few tens to a few hundred Ma apart, in order for sufficient regolith to develop between burial events. Obtaining useful archives of Solar System processes would therefore require extraction of regolith deposits buried at quite shallow depths beneath radiometrically-dated mare lava flows. These results provide a basis for possible lunar exploration activities.  相似文献   

15.
Eileen M. McGowan 《Icarus》2011,212(2):622-628
The largest areal concentration of pitted cones on Mars is located in the southwest section of Utopia basin. This particular area of pitted cones has been attributed to mud volcanism; several factors may have facilitated extensive mud volcanism at this location. The concentration of pitted cones is located where Utopia basin intersects Isidis basin; both features are multi-ring impact basins. On Earth, seismic investigations have shown that the outer rings of the Chicxulub multi-ring impact basin extend to the Mohorovi?i? discontinuity (Moho). If this is true on Mars as well, the fractures could act as conduits for water from Utopia Planitia, the site of a large, putative water body. It has been shown that methane can be generated at the mantle on Earth. On Mars this possible source of methane could combine with the infiltrated water to generate clathrates. While methane is not currently being released at the location of the pitted cones it could have been in the past. Three locations of methane release have been observed on Mars, two of which are located on the same outer ring of Isidis basin that intersects the pitted cone population. The area of Utopia basin that contains the large population of pitted cones is adjacent to the highland/lowland boundary where extensive deposition would have occurred. Extensive deposition combined with the potential for methane release may have contributed to the large population of pitted cones in this area of the Utopia basin.  相似文献   

16.
Lunar rilles and Hawaiian volcanic features: Possible analogues   总被引：1，自引：0，他引：1  
In this paper we consider the origin of rilles on the lunar maria, both sinuous and those having straight line segments, from the point of view of lava tubes formed in surface lava flows, and also in terms of collapses along active fissures. Terrestrial examples of tube formation and collapse, as well as the large-scale collapse of a chain of craters built over an active fissure were observed on the Island of Hawaii by the writers and serve as the basis of comparison with lunar topography shown on Orbiter photographs of the Moon. We also consider the origin of apparent flow channels on steep slopes on the Moon, and conclude that these are often related to early stages in the formation of covered lava tubes.Paper presented to the NATO Advanced Study Institute on Lunar Studies, Patras, Greece, September, 1971.  相似文献   

17.
The origin of the martian chaotic terrains is still uncertain; and a variety of geologic scenarios have been proposed. We provide topographic profiles of different chaos landscapes, notably Aureum and Hydraotes Chaos, showing that an initial shallow ground subsidence occurred at the first step of the chaos formation. We infer that the subsidence was caused by intrusion of a volcanic sill; which could have produced consequent melting as well as release of ground water from disrupted aquifer. Signs of a volcanic activity are observed on the floor of Hydraotes Chaos, a complex and deep depression located at the junction of three channels. The volcanic activity is represented by small, 0.5 to 1.5 km diameter, rounded cones with summit pits. The cone's size and morphology, as well as the presence of possible surrounding lava flows, suggest that they are primary volcanic cones similar to terrestrial cinder cones. The identification of volcanic activity on the deepest chaos, where the lower crustal thickness and the faults/fractures system contributed to the magma rising, reveals that magmatic activity, proved by the cones, and possibly help by structural activity, has been a major factor in the formation of chaotic terrains.  相似文献   

18.
Abstract— We evaluate the consequences of explosive activity having taken place during volcanic eruptions on the differentiated asteroid 4 Vesta, which is the likely parent body of the howardite-eucrite-diogenite (HED) meteorites. For a wide range of magma volatile contents, we calculate the eruption speeds and subsequent trajectories of the pyroclastic magma droplets produced. By considering the size distribution and eruption speeds of the droplets, and the mass fluxes at which they are ejected, we show that, under all realistic circumstances, the droplets will have formed lava fountains that were extremely optically dense. As a result, virtually all of the droplets will have reached the surface having suffered a negligible amount of radiative cooling and will have coalesced into lava ponds feeding lava flows. Typically, <1% of the pyroclasts will have undergone enough cooling to allow them to accumulate into a recognizable fall deposit consisting of unwelded or partly welded volcanic glass beads. This result is consistent with the apparent absence of identifiable pyroclastic material in the HED (and other types of) differentiated meteorites.  相似文献   

19.
New topographic maps of six large central volcanoes on Mars are presented and discussed. These features are Olympus Mons, Elysium Mons, Albor Tholus, Ceraunius Tholus, Uranius Tholus, and Uranius Patera. Olympus Mons has the general form of a terrestrial basaltic shield constructed almost entirely from lava flows; but with 20 to 23 km of relief it is far larger. Flank slopes average about 4°. A nominal density calculated from the shield volume and the local free-air gravity anomaly is so high that anomalously dense lithosphere probably underlies the shield. Uranius Patera is a similar feature of much lower present relief, about 2 km, but its lower flanks have been buried by later lava flood deposits. Elysium Mons has about 13 km of local relief and average slopes of 4.4°, not significantly steeper than those of Olympus Mons. Its upper flank slopes are significantly steeper than those of Olympus Mons. We suggest Elysium Mons is a shield volcano modified and steepened by a terminal phase of mixed volcanic activity. Alternatively, the volcano may be a composite cone. Albor Tholus is a partially buried 3-km-tall shield-like construct. Ceranius and Uranius Tholus are steeper cone-like features with relief of about 6 and 2 km, respectively. Slopes are within the normal range for terrestrial basaltic shields, however, and topographic and morphologic data indicate burial of lower flanks by plains forming lavas. These cones may be lava shield constructs modified by a terminal stage of explosive activity which created striking radial patterns of flank channels. Differences among these six volcanoes in flank slopes and surface morphology may be primarily consequences of different terminal phases of volcanic activity, which added little to the volume of any construct, and burial of shallow lower flanks by later geologic events. Additional topographic data for Olympus Mons, Arsia Mons, and Hadriaca Patera are described. The digital techniques used to extract topographiv data from Viking Orbiter stereo images are also described.  相似文献   

20.
The HRSC (image 0037) and MOC imagery and MOLA altimetry were used to determine the following parameters of the lava flows typical of the southern slope of the Martian volcano Olympus: the length (13–35 km), the width (0.2–4.8 km), and the angles of ground slopes along which these flows advanced (3.4°–6.9°). To measure the thickness of the flows, we applied a method which had never been used before for Mars. In this method, the apparent thickness obtained from the MOC images and the slope steepness obtained from the MOLA data are used to determine the true thickness. The average estimates of the thickness of lava flows vary from 4 to 11 m and from 4 to 26 m for the volcano flanks and caldera scarps, respectively. These values are close to those of terrestrial basalt flows and to the lower limit found for the Martian flows by other researchers. Based on the performed measurements, we estimated the lava yield strength (0.9 × 103?3.6 × 104 Pa), the supply rate (24–137 m3/s), and the viscosity (1.4 × 103?2.8 × 107 kg/m s). These values are close to the estimates found for the Martian lavas by other researchers and to the characteristic values of these parameters for terrestrial lava flows with basalt and basalt-andesite composition.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号