首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
基于DEM的黄土地貌逼近度因子构建及特征分析   总被引:1,自引:0,他引:1  
沟谷源点作为沟沿线上最为活跃的部位,其分别到上游分水线、下游沟谷线的流线空间比对关系,是表征三线空间结构的重要突破口。它在空间上向流域分水线逼近的程度,是量化黄土流域地貌系统发育程度的重要切入点。为探究黄土地貌区流域沟谷源点向流域分水线逼近的程度,揭示黄土流域地貌发育进程及该进程所表现的主要侵蚀方式,本文从水平和垂直2个维度,构建量化三线空间结构关系的核心因子--逼近度(PI),其中包括水平逼近度(HPI)和垂直逼近度(VPI),基于5 m分辨率数字高程模型,在陕北黄土高原遴选了包含16种地貌类型的42个样区,利用数字地形分析方法,探讨其平均值(MHPI, MVPI)的空间分异规律。另外,选择其中南北序列分别代表黄土塬、残塬、梁状丘陵沟壑和峁状丘陵沟壑区的淳化、宜君、甘泉和绥德4个地区,完备包含一至五级别沟谷的典型流域为重点实验样区,探讨陕北黄土高原流域尺度平均逼近度变异指数(MPIV)序列性特征。实验结果表明:①陕北黄土高原平均逼近度(MPI)存在强烈的空间自相关,MHPI在南北序列上先增大后减小,东西方向上逐渐减小,在黄河沿岸峡谷丘陵区MHPI达到最大;MVPI由西南-东北先减小后增加,由西北-东南逐渐减小,在渭北黄土台塬区达到最小;②在流域尺度上,MPIV值的正负与黄土塬区、丘陵沟壑区敏感相关;③4个重点样区MHPI、MVPI与其它地形因子存在南北序列上的一致性。104个外部汇流区平均水平逼近度与平均坡度相关性较好(P=0.43, a<0.001),平均垂直逼近度与面积高程积分强烈相关(P=0.75, a<0.001)。平均逼近度指标综合考量了黄土高原地区最典型的三条具有结构控制意义特征线的空间关系,对黄土地貌的发育程度有明显的指示性意义。  相似文献   

2.
崾岘是将要被切穿的鞍部,是正负地形矛盾斗争的结果,也是重要的地形控制点。典型的崾岘多位于黄土高原黄土地貌区,又称黄土崾岘,其对识别沟间地与沟谷的斗争程度有一定的指示作用。本文以黄土高原样区为例,基于1:1万DEM(5 m分辨率)和影像分辨率为0.95 m的遥感影像,利用流域边界算法和缓冲区标定,分析窗口选择5×5,实现了崾岘点位的半自动化提取。并对各崾岘点位求取坡度等地形因子,总结崾岘的空间格局和地形特征。结果显示,崾岘多分布在主流域边界和垂直于主沟道的最宽部分,地形控制作用明显。崾岘的坡度、起伏度、切割深度等值均大于鞍部值,同时,高级流域区的崾岘值大于低级流域区的崾岘值,反映出崾岘具有侵蚀程度强、表层完整性低、地表破碎度高的特点。总体而言,崾岘受沟道蚕食度高,从侧面反映了黄土地貌的发育阶段,是黄土地貌发育到中期的标志性产物。  相似文献   

3.
A land surface region can be decomposed into a series of watershed units with a hierarchical organizational structure. For loess landform, the watershed is a basic spatial–structural unit that can express natural landforms, surface morphology characteristics, spatial organization and developmental evolution. In this research we adopted the concept of node calibration in the watershed structure unit, selected six complete watersheds on China Loess Plateau as the research areas to study the quantitative characteristics of the hierarchical structure in terms of watershed geomorphology based on digital elevation model(DEM) data, and then built a watershed hierarchical structure model that relies on gully structure feature points. We calculated the quantitative indices, such as elevation, flow accumulation and hypsometric integral and found there are remarkably closer linear correlation between flow accumulation and elevation with increasing gully order, and the same variation tendency of hypsometric integral also presented. The results showed that the characteristics of spatial structure become more stable, and the intensity of spatial aggregation gradually enhances with increasing gully order. In summary, from the view of gully node calibration, the China Loess watershed structure shows more significantly complex, and the developmental situation variation of the loess landforms also exhibited a fairly stable status with gully order increasing. So, the loess watershed structure and its changes constructed the complex system of the loess landform, and it has the great significance for studying the spatial pattern and evolution law of the watershed geomorphology.  相似文献   

4.
黄土沟谷是黄土地貌中最有活力、最具变化、最富特色的对象单元,黄土高原千沟万壑的地貌形态以及触目惊心的侵蚀状态也让区域内沟谷地貌的形成、发育及演化问题成为研究中焦点及前沿性科学问题。近年来,诸多学者采用地学测年法、特征表达法、监测模拟法力图实现对黄土沟谷发育演化进程中“过去-现代-未来”的科学认知。这些研究在相当程度上丰富了黄土沟谷发育过程的认知。本文梳理了黄土高原沟谷地貌演化相关研究的现状,并从黄土高原地貌演化、黄土沟谷发育、基于DEM的沟谷信息提取与表达等研究进行了系统的回顾、梳理与分析。此外,本文提出“黄土沟道剖面群组”概念与方法,试图从新的视角审视黄土沟谷地貌发育演化过程。沟道剖面在黄土沟谷发育演化进程中传递物质能量和累积地形动力,并通过径流节点的串联实现剖面群的连接与组合,形成独特的剖面“群组”模式;该沟道剖面群组是集黄土沟谷地貌特征与过程于一体的综合信息集成体,其三维空间结构是对黄土沟谷地貌发育演化的高度抽象与映射,并可望进一步丰富黄土高原数字地形分析理论与方法体系,为黄土高原黄土地貌成因机理与空间分异格局带来创新的认识。  相似文献   

5.
Terrain texture analysis is an important method of digital terrain analysis in quantitative geomorphological research and in the exploration of the spatial heterogeneity and autocorrelation of terrain features. However, a major issue often neglected in previous studies is the calculation unit of the terrain texture, that is, the stability analysis unit. As the test size increases, the derived terrain textures become increasingly similar so that their differences can be ignored. The test size of terrain texture is defined as the stability analysis unit. This study randomly selected 48 areas within the Loess Plateau in northern Shaanxi in China as the study sites and used the gray level co-occurrence matrix to calculate the terrain texture. The stability analysis unit of the terrain texture was then extracted, and its spatial distribution pattern in the Loess Plateau was studiedusing spatial interpolation method. Four terrain texture metrics, i.e., homogeneity, energy, correlation, and contrast, were extracted on the basis of the stability analysis unit, and the spatial variation patterns of these parameters were studied. Results showed that the spatial distribution pattern and the terrain texture metrics reflected a trend of high–low–high from north to south, which correlated with the spatial distribution of the landforms at the Loess Plateau. In addition, the terrain texture measures was significantly correlated with the terrain factors of gully density and slope, and this relationship showed that terrain texture measures based on the stability analysis unit could reflect the basic characteristics of terrain morphology. The stability analysis unit provided a reasonable analytical scale for terrain texture analysis and could be used as a measure of the regional topography to accurately describe basic terrain characteristics.  相似文献   

6.
黄土高原"千沟万壑"的地貌形态,在多尺度空间下表现出显著自相似性,具有"局部无规则,宏观有规律"的纹理特征.目前,黄土高原地形纹理的提取方法及应用已经得到初步发展,但依然缺乏在理论层面的框架体系.本文在已有学者研究成果的基础上,限定黄土高原为研究范围,明确提出黄土高原地形纹理的概念模型,即内涵、特征、分类及表达.将内涵...  相似文献   

7.
The gully is the most dynamic and changeable landform unit on the Loess Plateau, and the characteristics of gully landforms are key indicators of gully evolution. Different gully profiles are connected and combined through runoff nodes. Thus, it is necessary to cluster gully profiles into a gully profile combination(GPC) to reveal the spatial variation in gully landforms throughout the Loess Plateau. First, the gradient and gully evolution index(GEI) of two sample areas in Changwu and Suide in Shaanxi Province, China are calculated and analysed based on GPC. Then, the gradient and GEI are calculated by using 90-m-resolution digital elevation model(DEM) data for the severe soil erosion area with the basin as the research unit. On this basis, the spatial variation in the development degree is analysed with Getis-Ord Gi*. The results show that the degree of gully undercutting decreases from southeast to northwest under the influence of rainfall. Due to the soil properties, the loess in the northwest is more prone to collapse, resulting in the decrease of GEI from northwest to southeast. The development degree of gullies is closely related to rivers. The strong erosive capacity of rivers leads to greater differences in gullies within the basin. At the same time, the skewness and kurtosis of the gully index in the basin are correlated; when the distribution of the gully index in the basin is less normal, the distribution of the gully index is more concentrated. These results reveal the spatial variation characteristics of the Loess Plateau based on GPC.  相似文献   

8.
坡谱信息熵尺度效应及空间分异   总被引:4,自引:0,他引:4  
选取陕北黄土高原48个不同地貌类型区,以其对应的1∶10000及1∶50000数字高程模型(DEM)为数据源,运用比较分析与数理统计的方法,分析了坡谱信息熵在陕北黄土高原的空间分异特征及尺度效应。结果显示,坡谱的信息熵在一定程度上可以反映地表的复杂度,坡谱信息熵和沟壑密度间有较好的幂函数关系,随着坡谱信息熵的增大,样区沟壑密度也增大。坡谱信息熵的空间分异和陕北黄土高原的黄土地貌形态在空间上的变异是相关的,可将其作为地貌类型划分的判别因子之一。  相似文献   

9.
In China′s Loess Plateau area, gully head is the most active zone of a drainage system in gully areas. The differentiation of loess gully head follows geospatial patterns and reflects the process of the loess landform development and evolution of its drainage system to some extent. In this study, the geomorphic meaning, basic characteristics, morphological structure and the basic types of loess gully heads were systematically analysed. Then, the loess gully head′s conceptual model was established, and an extraction method based on Digital Elevation Model(DEM) for loess gully head features and elements was proposed. Through analysing the achieved statistics of loess gully head features, loess gully heads have apparently similar and different characteristics depending on the different loess landforms where they are found. The loess head characteristics reflect their growth period and evolution tendency to a certain degree, and they indirectly represent evolutionary mechanisms. In addition, the loess gully developmental stages and the evolutionary processes can be deduced by using loess gully head characteristics. This study is of great significance for development and improvement of the theoretical system for describing loess gully landforms.  相似文献   

10.
Topographic feature points and lines are the framework of topography, and their spatial distance relationship is an breakthrough in the study of topographical geometry, internal structure and development level. Proximity distance(PD) is an indicator to describe the distance between the gully source point(GSP) and the watershed boundary. In the upstream catchment area, PDs can be expressed by the streamline proximity distance(SPD), as well as by the horizontal proximity distance(HPD) and the vertical proximity distance(VPD) in the horizontal and vertical dimensions, respectively. The series of indicators(e.g., SPD, HPD and VPD) are important for quantifying the geomorphological development process of a loess basin because of the headward erosion of loess gullies. In this study, the digital elevation model data with 5 m resolution and a digital topographic analysis method are used for the statistical analyses of the SPD, VPD and HPD in 50 sample areas of 6 geomorphic types in the Loess Plateau of northern Shaanxi. The spatial characteristics and the influencing factors are also analysed. Results show that: 1) Central tendencies for the HPDs and the VPDs for the whole study area and the six typical loess landforms are evident. 2) Spatial patterns of the HPDs and the VPDs exhibit evident trends and zonal distributions over the whole study area. 3) The HPDs have a strong positive correlation with gully density(GD) and hypsometric integral. The VPDs also correlates with GD to an extent. Vegetation cover, mean annual precipitation and loess thickness have stronger effects on the VPD than on the HPD.  相似文献   

11.
地貌分类在指导人类建设活动的规模与布局中有着重要的意义。然而,传统的基于数字高程模型(DEM)的地貌分类方法使用的地形因子和考虑到的地貌特征往往比较单一。本文提出了一种基于流域单元的地貌分类方法,该方法考虑了流域单元的多方面特征,包括基本地形因子统计量、地形特征点线统计量、小流域特征和纹理特征。本研究首先基于DEM进行水文分析将研究区域划分成不同的小流域。然后利用数字地形分析提取29个不同方面的特征来表征流域的形态,并基于随机森林(RF)算法进行了特征选择和参数标定。RF是一种基于决策树算法的集成分类器,能有效地处理高维数据,分类精度高。最后选择训练集小流域对RF分类器进行训练,使用训练完成的分类器对整个研究区域的地貌进行分类,研究地貌分异的规律。该实验在我国陕北黄土高原典型黄土地貌区域的地貌分类中取得了较好的结果,结果表明不同的地貌之间存在明显的区域界线,特定的地貌类型在空间上表现出明显的聚集性。通过人工判读进行验证的分类精度达到了85%,Kappa系数为0.83。  相似文献   

12.
沟谷侵蚀是塑造黄土地表侵蚀形态的主要动力,沟谷的发育过程深刻地影响着黄土地貌的发育及演化。本文在黄土高原选择6个典型地貌样区,以样区的数字高程模型为基本数据源提取沟谷系统。将沟谷系统中的沟谷节点、沟谷源点和流域出水口点作为网络节点,网络节点之间的空间拓扑关系为边,高程差为权值,构建黄土高原沟谷加权复杂网络模型。对黄土沟谷地貌的节点特征和空间结构进行定量刻画和分析,得到黄土高原不同地貌类型网络特征的空间格局及其变化,并进一步映射地貌的发育过程及演化机理。研究结果表明:① 黄土高原沟谷加权网络的点强度累积概率分布呈指数分布,相关性系数皆达到0.80以上,该网络正处于向无标度网络转化的过渡期;② 样区从南到北,沟谷特征点的点强度值呈现逐渐减小的态势,且点强度的分布具有不对称性,沟谷右侧侵蚀强度较高,点强度分布较多;③ 平均路径长度和网络结构熵值在绥德一带最大,分别为30.94、6.31,并向南北两侧呈减少的趋势,网络密度值的变化与之相反;3个指标分别从网络结构的连通性、稳定性和紧密性反映了不同沟谷地貌类型的侵蚀程度以及地貌系统的演化机理;④ 网络指标与传统地貌指标的相关性系数均超过0.85,其可以科学、准确地表达地貌形态的复杂性及地貌的发育阶段,有望作为沟谷地貌地学特征研究的参数。该方法考虑了沟谷地貌的空间拓扑关系以及系统的整体性,为复杂表面形态的地貌研究提出了一种新的思路和方法。  相似文献   

13.
Automatic recognition of loess landforms using Random Forest method   总被引:1,自引:1,他引:0  
The automatic recognition of landforms is regarded as one of the most important procedures to classify landforms and deepen the understanding on the morphology of the earth. However, landform types are rather complex and gradual changes often occur in these landforms, thus increasing the difficulty in automatically recognizing and classifying landforms. In this study, small-scale watersheds, which are regarded as natural geomorphological elements, were extracted and selected as basic analysis and recognition units based on the data of SRTM DEM. In addition, datasets integrated with terrain derivatives(e.g., average slope gradient, and elevation range) and texture derivatives(e.g., slope gradient contrast and elevation variance) were constructed to quantify the topographical characteristics of watersheds. Finally, Random Forest(RF) method was employed to automatically select features and classify landforms based on their topographical characteristics. The proposed method was applied and validated in seven case areas in the Northern Shaanxi Loess Plateau for its complex andgradual changed landforms. Experimental results show that the highest recognition accuracy based on the selected derivations is 92.06%. During the recognition procedure, the contributions of terrain derivations were higher than that of texture derivations within selected derivative datasets. Loess terrace and loess mid-mountain obtained the highest accuracy among the seven typical loess landforms. However, the recognition precision of loess hill, loess hill–ridge, and loess sloping ridge is relatively low. The experiment also shows that watershed-based strategy could achieve better results than object-based strategy, and the method of RF could effectively extract and recognize the feature of landforms.  相似文献   

14.
利用数字摄影测量方法估算半干旱区小流域沟谷侵蚀产沙   总被引:1,自引:0,他引:1  
土壤侵蚀不仅表现黄土高原强烈的现代地貌过程,也是其生态环境恶化的象征,其地貌演化和土壤侵蚀互为因果,现代研究表明黄土高原半干旱小流域的沟谷侵蚀产沙占其水土流失总量的重要部分,近年有关沟谷侵蚀的定量研究成果,加深了人们对沟道侵蚀危害的认识,为土地资源的合理利用、沟谷危害的评价等提供了科学依据。传统的沟谷侵蚀定量研究是采用实地量测的方法,现代的数字摄影测量技术的发展为估算沟谷侵蚀研究提供了一个经济高效方法。本研究采用的髙分辨率数字高程模型是由3期历史航空照片根据数字摄影测量方法制作而成,利用它对黄土高原半干旱区一个小流域的1959~1981年及1981~1999年两个时段内沟谷侵蚀产沙量进行估算,将流域侵蚀产沙的实测值与估算结果进行评价。并指出此方法在沟谷侵蚀产沙量估算方面的统计学意义及在未来应用时要注意的问题;根据流域侵蚀产沙结果分析历史时期人类活动的影响:人类活动在一定程度上改善了环境,绝大部分泥沙被拦截在流域里,同时沟道侵蚀加剧,如何采取措施减少流域坡面和沟道的侵蚀,是目前人们所面对的问题;此外,结合流域水沙统计数据的DEM的侵蚀空间分析,结果表明坡面流、重力侵蚀及沟谷的下切是导致流域土壤侵蚀的主要原因。  相似文献   

15.
基于DEM提取坡谱信息的不确定性   总被引:3,自引:1,他引:2  
坡谱是黄土高原地学分析新方法、新思路的探索。本文基于坡谱不确定性的概念及其过程分布模型的论述,以陕北黄土高原国家1∶10000和1∶50000DEM数据为基本信息源,分析了坡谱不确定性的产生原因、主要影响因素与影响规律,阐述了坡谱提取与应用中应注意的主要问题,为正确应用坡谱进行地学分析提供重要依据。  相似文献   

16.
区分地理实体最直接有效的方式在于对其界线作出划定。目前,黄土高原地貌类型界线划定多是在分类基础上按照分类界线、自然区划界线来界定。基于不同数据源及其表达方式,本文追踪前人对黄土高原地貌类型界线划定的研究进展,从形态成因的地貌分类、数字地貌分类等分类体系中总结了黄土地貌类型界线的内涵,分析了基于自然语言和数字环境下定量描述的优缺点和存在的问题;并梳理了黄土地貌类型界线的表示方法以及基于数字地形分析技术的地貌类型定量识别及其划分方法;从地貌界线确定与分类体系的关系、地貌界线划定的理论与方法参考、地貌界线划定的尺度效应3个方面对地貌类型界线做出了讨论分析与展望,以期为黄土地貌区划的相关理论研究提供背景基础,为当地实践工作等提供理论依据和支撑。  相似文献   

17.
Snake Model for the Extraction of Loess Shoulder-line from DEMs   总被引:1,自引:0,他引:1  
Shoulder lines are the most important landform demarcations for geographical analysis,soil erosion modeling and land use planning in the Loess Plateau area of China.This paper proposes an automatic,effective and accurate method of determining loess shoulder line from DEMs by integrating a hydrological D8 algorithm and a snake model.The watershed boundary line is adopted as the initial contour which evolves to identify the exact position of loess shoulder-line by the guidance of an external force of snake model from DEMs.Experiments show that the method overcomes the difficulties in both threshold selection for edge detection and the disconnecting issues in former extraction approaches.The accuracy evaluation of shoulder-line maps from the two test sites of the loess plateau area show obvious improvements in the extraction.The average contour matching distance of the new method is 12.0 m on 5 m resolution DEM,and shows improvement in the accuracy and continuity.The comparisons of accuracy evaluations of the two test sites show that the snake model method performs better in the loess plain area than in the area with high gully density.  相似文献   

18.
Planation surface, a surface that is almost flat, is a kind of low-relief landforms. Planation surface is the consequence of the denudation and planation processes under a tectonic stable condition. The quantitative expression of the characteristics of planation surface plays a key role in reconstructing and describing the evolutionary process of landforms. In this study, Landform Planation Index (LPI), a new terrain derivative, was proposed to quantify the characteristics of planation surface. The LPIs were calculated based on the summit surfaces formed according to the clustering results of peaks. Ten typical areas in the Ordos Platform located in the central part of the Loess Plateau of China are chosen as the test areas for investigating their planation characteristics with the LPI. The experimental results indicate that the LPI can be effectively used to quantify the characteristics of planation surfaces. In addition, the LPI can be further used to depict the patterns of spatial differentiation in the Ordos Platform. Although the present Ordos Platform area is full of the high-density gullies, its planation characteristics is found to be well preserved. Furthermore, the characteristics of the planation surfaces can also reflect the original morphology of the Ordos Platform before the loess dusts deposition process evolved in this area. The statistical results of the LPI show that there is a gradually increasing tendency along with the increasing of slope gradient of summit surface. It indicates that the characteristics of planation surfaces vary among test areas with different landforms. These findings help to deepen the understanding of planation characteristics of the loess landform and its underlying paleotopography. Results of this study can be also served as an important theoretical reference value for revealing the evolutionary process of loess landform.  相似文献   

19.
Although many studies have investigated slope gradient uncertainty derived from Digital Elevation Models(DEMs), the research concerning slope length uncertainty is far from mature. This discrepancy affects the availability and accuracy of soil erosion as well as hydrological modeling. This study investigates the formation and distribution of existing errors and uncertainties in slope length derivation based on 5-m resolution DEMs of the Loess Plateau in the middle of China. The slope length accuracy in three different landform areas is examined to analyse algorithm effects. The experiments indicate that the accuracy of the flat test area is lower than that of the rougher areas. The value from the specific contributing area(SCA) method is greater than the cumulative slope length(CSL), and the differences between these two methods arise from the shape of the upslope area. The variation of mean slope length derived from various DEM resolutions and landforms. The slope length accuracy decreases with increasing grid size and terrain complexity at the six test sites. A regression model is built to express the relationship of mean slope length with DEM resolution less than 85 m and terrain complexity represented by gully density. The results support the understanding of the slope length accuracy, thereby aiding in the effective evaluation of the modeling effect of surface process.  相似文献   

20.
《山地科学学报》2020,17(1):133-146
Solar radiation is often shielded by terrain relief, especially in mountainous areas, before reaching the surface of the Earth. The objective of this paper is to study the spatial structures of the shielded astronomical solar radiation(SASR) and the possible sunshine duration(PSD) over the Loess Plateau. To this end, we chose six test areas representing different landforms over the Loess Plateau and the software package of Matlab was used as the main computing platform. In each test area, 5-m-resolution digital elevation model established from 1:10,000 scale topographic maps was used to compute the corresponding slope, SASR and PSD. Then, we defined the concepts of the slope-mean SASR spectrum and the slope-mean PSD spectrum, and proposed a method to extract them from the computed slope, SASR and PSD over rectangular analysis windows. Using this method, we found both spectrums in a year or in a season for each of the four seasons in the six test areas. Each spectrum was found only when the area of the corresponding rectangular analysis window was greater than the corresponding stable area of the spectrum. The values of the two spectrums decreased when the slope increased.Furthermore, the values of the stable areas of the spectrums in a year or in a season were positively correlated with the variable coefficients of the slope or the profile curvature. The values of the stable areas of the two spectrums in a year or in a season may represent the minimum value of test areas for corresponding future research on the spatial structures of the SASR or PSD. All the findings herein suggest that the spatial structures of the PSD and the SASR are caused by the interactions between solar radiation and terrain relief and that the method for extracting either spectrum is effective for detecting their spatial structures. This study may deepen our understanding of the spatial structure of solar radiation and help us further explore the distribution of solar energy in mountainous regions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号