共查询到20条相似文献，搜索用时 31 毫秒
1.
The traffic‐induced variability in the dynamic properties of a cable‐stayed bridge is investigated using ambient vibration measurements. Under a relatively steady wind and temperature environment, the ambient vibration test was conducted on the bridge with normal traffic conditions and totally 24 h acceleration response time histories were recorded. These data are divided into 12 sections with each data section containing 2 h measurements. Thereby the modal variability due to changing traffic loading is investigated through post‐processing of the data in each section in both amplitude and frequency domains. The result indicates that the natural frequencies of the global modes can exhibit as much as 1% variation within a day. The modal amplitudes of each mode as well as the modal deflection at each measurement position vary insignificantly. The damping ratios however are sensitive to the vibration intensity, especially when the deck vibration exceeds a certain level. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
2.
A Markov method of analysis is presented for obtaining the seismic response of cable‐stayed bridges to non‐stationary random ground motion. A uniformly modulated non‐stationary model of the random ground motion is assumed which is specified by the evolutionary r.m.s. ground acceleration. Both vertical and horizontal components of the motion are considered to act simultaneously at the bridge supports. The analysis duly takes into account the angle of incidence of the earthquake, the spatial correlation of ground motion and the quasi‐static excitation. A cable‐stayed bridge is analysed under a set of parametric variations in order to study the non‐stationary response of the bridge. The results of the numerical study indicate that (i) frequency domain spectral analysis with peak r.m.s. acceleration as input could provide more r.m.s. response than the peak r.m.s. response obtained by the non‐stationary analysis; (ii) the longitudinal component of the ground motion significantly influences the vertical vibration of the bridge; and (iii) the angle of incidence of the earthquake has considerable influence on the deck response. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
3.
4.
Pseudo‐dynamic tests on a large‐scale model of an existing six‐pier bridge were performed at the ELSA laboratory using the substructuring technique. Two physical pier models were constructed and tested in the laboratory, while the deck, the abutments and the remaining four piers were numerically modeled on‐line. These tests on a large‐scale model of an existing bridge are the first to have been performed considering non‐linear behavior for the modeled substructure. Asynchronous input motion, generated for the specific bridge site, was used for the abutments and the pier bases. Three earthquake tests with increasing intensities were carried out, aimed at the assessment of the seismic vulnerability of a typical European motorway bridge designed prior to the modern generation of seismic codes. The experimental results confirm the poor seismic behavior of the bridge, evidenced by irregular distribution of damage, limited deformation capacity, tension shift effects and undesirable failure locations. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
5.
R.A.Khan T.K.Datta S.Ahmad 《地震工程与工程振动(英文版)》2005,4(1):83-94
A simplified fragility analysis of fan type cable stayed bridges using Probabilistic Risk Analysis (PRA) procedure is presented for determining their failure probability under random ground motion. Seismic input to the bridge support is considered to be a risk consistent response spectrum which is obtained from a separate analysis. For the response analysis, the bridge deck is modeled as a beam supported on springs at different points. The stiffnesses of the springs are determined by a separate 2D static analysis of cable-tower-deck system. The analysis provides a coupled stiffness matrix for the spring system. A continuum method of analysis using dynamic stiffness is used to determine the dynamic properties of the bridges .The response of the bridge deck is obtained by the response spectrum method of analysis as applied to multidegree of freedom system which duly takes into account the quasi - static component of bridge deck vibration. The fragility analysis includes uncertainties arising due to the variation in ground motion, material property, modeling, method of analysis, ductility factor and damage concentration effect. Probability of failure of the bridge deck is determined by the First Order Second Moment (FOSM) method of reliability. A three span double plane symmetrical fan type cable stayed bridge of total span 689 m, is used as an illustrative example. The fragility curves for the bridge deck failure are obtained under a number of parametric variations. Some of the important conclusions of the study indicate that (i) not only vertical component but also the horizontal component of ground motion has considerable effect on the probability of failure; (ii) ground motion with no time lag between support excitations provides a smaller probability of failure as compared to ground motion with very large time lag between support excitation; and (iii) probability of failure may considerably increase for soft soil condition. 相似文献
6.
7.
以某三塔自锚式悬索桥为工程背景,建立三维有限元模型,通过调整缆索初应变确定恒载作用下的成桥线形,基于静力平衡状态进行模态分析得到三塔自锚式悬索桥的振型及频率。结构动力特性影响参数分析表明:主缆抗拉刚度、加劲梁竖向弯曲刚度、桥面恒载集度、矢跨比等参数对结构动力特性影响较大。 相似文献
8.
In this paper, a full-scale 3-D finite element model of the Jundushan cable-stayed aqueduct bridge is established with ANSYS Code. The shell, fluid, tension-only spar and beam elements are used for modeling the aqueduct deck, filled water, cables and support towers, respectively. A multi-element cable formulation is introduced to simulate the cable vibration. The dry (without water) and wet (with water) modes of the aqueduct bridge are both extracted and investigated in detail. The dry modes of the aqueduct bridge are basically similar to those of highway cable-stayed bridges. A dry mode may correspond to two types of wet modes, which are called the in-phase (with lower frequency) and out-of-phase (with higher frequency) modes. When the water-structure system vibrates in the in-phase/out-of-phase modes, the aqueduct deck moves and water sloshes in the same/opposite phase-angle, and the sloshing water may take different surface-wave modes. The wet modes of the system reflect the properties of interaction among the deck, towers, cables and water. The in-phase wet frequency generally decreases as the water depth increases, and the out-of-phase wet frequency may increase or decrease as the water depth increases. 相似文献
9.
10.
四渡河大跨悬索桥空间地震响应分析 总被引：2，自引：0，他引：2
非一致激励输入对大跨结构响应有着较大影响。本文以四渡河悬索桥为背景,首先根据该桥动力特性对规范反应谱进行调整,基于修正反应谱并考虑相位非平稳性合成地震动位移;然后编制了调索程序来确定有限元模型的初始平衡构型;采用时程法,分别分析了在纵桥向、横桥向以及竖向的非一致激励(行波输入、多点输入)下的悬索桥地震响应。计算结果表明,纵向非一致激励输入增大了悬索桥的地震响应,横向、竖向非一致激励输入的影响有增有减。 相似文献
11.
The study aims at investigating the structural behavior of the Fatih Sultan Mehmet Suspension Bridge, i.e. the second Bosphorus Bridge in Turkey, under multi-point earthquake excitations, and determining the earthquake performance of the bridge based on the results obtained from this analysis. For this objective, spatially varying ground motions in triple direction were produced for each support of the bridge considering the Mw=7.4 scenario earthquakes on the main Marmara Fault. In order to simulate the ground motions, modified stochastic finite-fault technique was utilized. Taking the ground motions into account, non-linear time-history analysis was carried out, and the results obtained from the analysis were compared to those from uniform support earthquake excitation to identify the effects of multi-point earthquake excitations on the seismic performance of the bridge. From the analysis, it was determined that modal response of the towers and the deck was mostly effective on dynamic response of the entire bridge rather than other structural elements, such as cable and approach viaduct. Compared to the results obtained from simple-point earthquake excitation, noticeable axial force increase in the cable elements was obtained under multi-point earthquake excitation. The changes at the main cable and the side span cable were determined as 21% and 18%, respectively. This much increase in the cable elements led to increase in axial force at the towers and in shear force at the base section of the tower column. These changes in the structural elements were closely related to response of the deck and the towers since they had considerable contribution to response of the entire bridge. Based on the findings from the study, spatially varying ground motions has to be considered for long span suspension bridges, and the multi-support earthquake analysis should be carried out for better understanding and obtaining reliable results necessary for retrofitting and performance evaluation. 相似文献
12.
The theoretical and experimental investigation of a cable-stayed bridge after major repair is described in this paper. Strengthening mainly involved the suspension system (originally with prestressed concrete stays) which was retrofitted by means of external tendons. Full-scale tests were conducted to measure the dynamic response of the repaired system; the experimental program included both traffic-induced and free vibration measurements. A total of 16 vertical frequencies and mode shapes were identified in the frequency range of 0–10 Hz. In the theoretical study, vibration modes involving deck, towers and cables were determined by using finite element models which accounted for the strengthening effects. Two- and three-dimensional models were used so that the importance of three-dimensional modes was estimated as well. The experimental results were compared to natural frequencies and mode shapes computed using theoretical models. For most modes the measured and predicted modal parameters compare well, especially for the vertical modes involving in-phase motion of the stays. © 1997 by John Wiley & Sons, Ltd. 相似文献
13.
The analysis of dynamic responses of cable-stayed bridges subjected to wind and earthquake loads generally considers only
the motions of the bridge deck and pylons. The influence of the stay cable vibration on the responses of the bridge is either
ignored or considered by approximate procedures. The transverse vibration of the stay cables, which can be significant in
some cases, are usually neglected in previous research. In the present study, a new three-node cable element has been developed
to model the transverse motions of the cables. The interactions between the cable behavior and the other parts of the bridge
superstructure are considered by the concept of dynamic stiffness. The nonlinear effect of the cable caused by its self-weight
is included in the formulation. Numerical examples are presented to demonstrate the accuracy and efficiency of the proposed
model. The impact of cable vibration behavior on the dynamic characteristics of cable-stayed bridges is discussed.
Supported by: Natural Science and Engineering Research Council of Canada 相似文献
14.
Structural health monitoring of long-span suspension bridges using wavelet packet analysis 总被引：1，自引：0，他引：1
During the service life of civil engineering structures such as long-span bridges, local damage at key positions may continually accumulate, and may finally result in their sudden failure. One core issue of global vibration-based health monitoring methods is to seek some damage indices that are sensitive to structural damage. This paper proposes an online structural health monitoring method for long-span suspension bridges using wavelet packet transform (WPT). The WPT- based method is based on the energy variations of structural ambient vibration responses decomposed using wavelet packet analysis. The main feature of this method is that the proposed wavelet packet energy spectrum (WPES) has the ability to detect structural damage from ambient vibration tests of a long-span suspension bridge. As an example application, the WPES-based health monitoring system is used on the Runyang Suspension Bridge under daily environmental conditions. The analysis reveals that changes in environmental temperature have a long-term influence on the WPES, while the effect of traffic loadings on the measured WPES of the bridge presents instantaneous changes because of the nonstationary properties of the loadings. The condition indication indices VD reflect the influences of environmental temperature on the dynamic properties of the Runyang Suspension Bridge. The field tests demonstrate that the proposed WPES-based condition indication index VD is a good candidate index for health monitoring of long-span suspension bridges under ambient excitations. 相似文献
15.
Juan R. Casas 《地震工程与结构动力学》1995,24(1):35-51
Accelerations and displacements due to dynamic excitation by simulated traffic consisting of two trucks, were measured on the deck and tower of the Alamillo cable-stayed bridge. Also the dynamic testing program included the measurement with accelerometers of the free-damped vibration of the 26 cables achieved by means of quick-releasing force. From these measurements it was possible to obtain the dynamic parameters of the bridge (natural frequencies and damping ratios) and the real forces in the cables. In the paper, only the tests, results and conclusions related to dynamic parameters of the bridge are presented. The objective of the dynamic tests herein described was to validate the mathematical modelling and the wind-tunnel models used in the dynamic analysis of the bridge in front of traffic and wind-forces. As the agreement between dynamic parameters of the real bridge and theoretical and scaled models was very satisfactory, the correct dynamic behaviour of the bridge in response to traffic and wind (vortex shedding, flutter, etc.) can be deduced jointly with the correct alignment and expected internal forces in the permanent state in tower and deck. 相似文献
16.
The dynamic responses of the Tsing Ma suspension bridge and the running behaviors of trains on the bridge under turbulent
wind actions are analyzed by a three-dimensional wind-train-bridge interaction model. This model consists of a spatial finite
element bridge model, a train model composed of eight 4-axle identical coaches of 27 degrees-of-freedom, and a turbulent wind
model. The fluctuating wind forces, including the buffeting forces and the self-excited forces, act on the bridge only, since
the train runs inside the bridge deck. The dynamic responses of the bridge are calculated and some results are compared with
data measured from Typhoon York. The runnability of the train passing through the Tsing Ma suspension bridge at different
speeds is researched under turbulent winds with different wind velocities. Then, the threshold curve of wind velocity for
ensuring the running safety of the train in the bridge deck is proposed, from which the allowable train speed at different
wind velocities can be determined. The numerical results show that rail traffic on the Tsing Ma suspension bridge should be
closed as the mean wind velocity reaches 30 m/s. 相似文献
17.
Effect of vehicle weight on natural frequencies of bridges measured from traffic-induced vibration 总被引：2，自引：0，他引：2
Recently, ambient vibration test (AVT) is widely used to estimate dynamic characteristics of large civil structures. Dynamic
characteristics can be affected by various environmental factors such as humidity, intensity of wind, and temperature. Besides
these environmental conditions, the mass of vehicles may change the measured values when traffic-induced vibration is used
as a source of AVT for bridges. The effect of vehicle mass on dynamic characteristics is investigated through traffic-induced
vibration tests on three bridges; (1) three-span suspension bridge (128m +404m + 128m), (2) five-span continuous steel box
girder bridge (59m + 3@95m + 59m), (3) simply supported plate girder bridge (46m). Acceleration histories of each measurement
location under normal traffic are recorded for 30 minutes at field. These recorded histories are divided into individual vibrations
and are combined into two groups according to the level of vibration ; one by heavy vehicles such as trucks and buses and
the other by light vehicles such as passenger cars. Separate processing of the two groups of signals shows that, for the middle
and long-span bridges, the difference can be hardly detected, but, for the short span bridges whose mass is relatively small,
the measured natural frequencies can change up to 5.4%.
Supported by: the Ministry of Construction and Transportation, Korea Highway Corporation and Hyundai E&C Co. Ltd. under Project
No. R&D/970003-2. 相似文献
18.
An extensive programme of full-scale ambient vibration tests has been conducted to measure the dynamic response of a 542 m (centre span of 274 m) cable-stayed bridge—the Quincy Bayview Bridge in Illinois. A microcomputer-based system was used to collect and analyse the ambient vibration data. A total of 25 modal frequencies and associated mode shapes were identified for the deck structure within the frequency range of 0–2 Hz. Also, estimations were made for damping ratios. The experimental data clearly indicated the occurrence of many closely spaced modal frequencies and spatially complicated mode shapes. Most tower modes were found to be associated with the deck modes, implying a considerable interaction between the deck and tower structure. No detectable levels of motion were evident at the foundation support of the pier. The results of the ambient vibration survey were compared to modal frequencies and mode shapes computed using a three-dimensional finite element model of the bridge. For most modes, the analytic and experimental modal frequencies and mode shapes compare quite well, especially for the vertical modes. Based on the findings of this study, a linear elastic finite element model appears to be capable of capturing much of the complex dynamic behaviour of the bridge with very good accuracy, when compared to the low-level dynamic responses induced by ambient wind and traffic excitations. 相似文献
19.
This paper presents the application of system identification (SI) to long‐span cable‐supported bridges using seismic records. The SI method is based on the System Realization using Information Matrix (SRIM) that utilizes correlations between base motions and bridge accelerations to identify coefficient matrices of a state‐space model. Numerical simulations using a benchmark cable‐stayed bridge demonstrate the advantages of this method in dealing with multiple‐input multiple‐output (MIMO) data from relatively short seismic records. Important issues related to the effects of sensor arrangement, measurement noise, input inclusion, and the types of input with respect to identification results are also investigated. The method is applied to identify modal parameters of the Yokohama Bay Bridge, Rainbow Bridge, and Tsurumi Fairway Bridge using the records from the 2004 Chuetsu‐Niigata earthquake. Comparison of modal parameters with the results of ambient vibration tests, forced vibration tests, and analytical models are presented together with discussions regarding the effects of earthquake excitation amplitude on global and local structural modes. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
20.
Nefize Shaban Alp Caner Ahmet Yakut Aysegul Askan Ali Karimzadeh Naghshineh Arman Domanic Gizem Can 《地震工程与结构动力学》2015,44(6):889-905
Presence of vehicles on a bridge has been observed many times during past earthquakes. Although in practice, the engineers may or may not include the live load contribution to seismic weight in design, current bridge design codes do not specify a certain guideline. A very limited research has been conducted to address this issue from design point of view. The focus of this research is to experimentally assess the effect of a vehicle on the seismic response of a bridge through a large‐scale model. In this scope, a 12‐meter long bridge, having a one lane deck with concrete slab on steel girders, has been shaken under five different ground motions obtained from recent earthquakes that occurred in Turkey, in its transverse direction, both with and without a vehicle on top of the deck. The measured results have indicated that top slab transverse acceleration and bearing displacements can reduce up to 18.7% in presence of a vehicle during seismic tests, which is an indication of reduction in substructure forces. The main reason for the reduction in seismic response of the bridge in the presence of live load can be ascribed to the increase in damping of the system due to mass damper‐like action induced by the vehicle. This beneficial effect cannot be observed in vertical seismic response. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献