共查询到20条相似文献，搜索用时 46 毫秒
1.
Hatton Bank (northwest U.K.) continental margin structure 总被引：1，自引：0，他引：1
R.S. White G. K. Westbrook S.R. Fowler G.D. Spence P.J. Barton M. Joppen J. Morgan A.N. Bowen C. Prestcott M.H.P. Bott 《Geophysical Journal International》1987,89(1):265-272
Summary. The continent-ocean transition near Hatton Bank was studied using a dense grid of single-ship and two-ship multichannel seismic (mcs) profiles. Extensive oceanward dipping reflectors in a sequence of igneous rocks are developed in the upper crust across the entire margin. At the landward (shallowest) end the dipping reflectors overlie continental crust, while at the seaward end they are formed above oceanic crust. Beneath the central and lower part of the margin is a mid-crustal layer approximately 5 km thick that could be either stretched and thinned continental crust or maybe newly formed igneous crust generated at the same time as the dipping reflector sequence. Beneath this mid-crustal layer and above a well defined seismic Moho which rises from 27 km (continental end) to 15 km (oceanic end) across the margin, the present lower crust comprises a 10–15 km thick lens of material with a seismic velocity of 7.3 to 7.4 km/s. We interpret the present lower crustal lens as underplated igneous rocks left after extraction of the extruded basaltic lavas, A considerable quantity of new material has been added to the crust under the rifted margin. The present Moho is a new boundary formed during creation of the margin and cannot, therefore, be used to determine the amount of thinning. 相似文献
2.
Summary. The continent-ocean transition adjacent to Hatton Bank was studied using a dense grid of single-ship and two-ship multichannel seismic profiles. The interpretation of the explosive expanding spread profiles (ESPs) which were shot as part of this survey are discussed here in detail. Extensive seaward dipping reflectors are developed in the upper crust across the entire margin. These seaward dipping reflectors continue northwards on the Faeroes and Vøring margins, where they have been shown to be caused by basaltic lavas, as well as on the conjugate margin of East Greenland. The dipping reflectors are an important feature of the rifting history of the margin and show that extensive volcanism was associated with the extension. The ESPs show clear seismic arrivals out to ranges of 100 km. Wide-angle Moho reflections can be seen on all the lines as well as good mid and lower crustal arrivals. The determination of seismic velocity structure was constrained by ray tracing and by amplitude modelling using reflectivity synthetic seismograms. The results from the ESPs show that there is a thick region of lower crustal material beneath the margin with an unusually high crustal velocity of 7.3–7.4 km s−1 . This lower crustal material reaches a maximum thickness of 14 km beneath the central part of the margin and is terminated at depth by the Moho. The lower crustal lens of high-velocity material is interpreted as underplated or intruded igneous rocks associated with the large volumes of extrusive basaltic lavas, now seen as dipping reflectors on the margin. 相似文献
3.
F.J. Davey 《Geophysical Journal International》1987,89(1):443-448
Summary. The active Australian-Pacific plate boundary passes through New Zealand. In the north, the Pacific plate subducts beneath the Australian plate with an accretionary wedge forming the eastern continental (Hikurangi) margin of the North Island. The structure of the region behind the Hikurangi margin changes from the extensional back-arc basin under central North Island to a postulated crustal downwarp under the southern North Island. A 100 km long multichannel seismic reflection profile was recorded across the region of crustal downwarp. The data show discontinuous coherent reflectors dipping westwards at the east end of the profile, and east dipping reflectors at the west end, from depths of 9 to 15 s two way time. Simple hand migration of these events indicate that the east dipping reflectors, interpreted as the base of the Australian plate crust, abut against the west dipping reflectors which are interpreted as marking the top of the subducted Pacific plate. Detailed earthquake hypocentre locations in the area show a dipping zone of high seismicity, the top of which coincides closely with the west dipping events, thus supporting this interpretation. 相似文献
4.
Summary. In this study, seismological techniques are combined with surface observations to investigate the faulting associated with three large earthquakes in western Turkey. All involved normal faulting that nucleated at 6–10 km depth with dips in the range 30–50°. The two largest earthquakes, at Alaşehir (1969.3.28) and Gediz (1970.3.28), were clearly multiple events and their seismograms indicate that at least two discrete subevents were involved in producing the observed surface faulting. In addition, their seismograms contain later, longer-period signals that are likely to represent source, not structure or propagation, complexities. These later signals can be modelled by subevents with long time functions on almost flat detachment-type faults.
As a result of these observations, we propose a model for the deformation of the lower crust, in which brittle failure of the top part occurs when high strain rates are imposed during an earthquake that ruptures right through the upper, brittle crust. Under these special circumstances, seismic motion occurs on discrete faults in the lower crust, which otherwise normally deforms by distributed creep. In the case of the normal faults studied here, motion in the uppermost lower crust takes place on shallow dipping faults that are downward continuations of the steeper faults that break to the surface. The faults thus have an overall listric geometry, flattening into a weak zone below the brittle layer at a depth that is probably dependent on the termperature gradient. This interpretation explains why detachment-type mechanisms are not seen in first motion fault plane solutions of normal faulting earthquakes, and suggests an origin for the Metamorphic Core Complexes seen in the Basin and Range Province, which probably represent flat lower crustal faults, analogous to those postulated at Alaşehir and Gediz, that have been uplifted to the surface. 相似文献
As a result of these observations, we propose a model for the deformation of the lower crust, in which brittle failure of the top part occurs when high strain rates are imposed during an earthquake that ruptures right through the upper, brittle crust. Under these special circumstances, seismic motion occurs on discrete faults in the lower crust, which otherwise normally deforms by distributed creep. In the case of the normal faults studied here, motion in the uppermost lower crust takes place on shallow dipping faults that are downward continuations of the steeper faults that break to the surface. The faults thus have an overall listric geometry, flattening into a weak zone below the brittle layer at a depth that is probably dependent on the termperature gradient. This interpretation explains why detachment-type mechanisms are not seen in first motion fault plane solutions of normal faulting earthquakes, and suggests an origin for the Metamorphic Core Complexes seen in the Basin and Range Province, which probably represent flat lower crustal faults, analogous to those postulated at Alaşehir and Gediz, that have been uplifted to the surface. 相似文献
5.
The deep seismicity of the Tyrrhenian Sea 总被引：4，自引：0，他引：4
The study reappraises the deep seismicity of the Tyrrhenian Sea. Careful examination of the quality of reported hypocentres shows that the earthquakes define a zone dipping NW, about 200 km along strike, 50 km thick, and reaching a depth of about 500 km. The zone is slightly concave to the NW at a depth of 300 km, but, contrary to many previous reports, is not tightly concave, nor are there significant spatial gaps in the seismicity, which is effectively continuous with depth. Seismicity is, however, concentrated in the depth interval 250–300 km, where the dip of the seismic zone changes from 70° (above 250 km) to a more gentle dip of 45° at greater depths. Seven fault-plane solutions are available for the largest earthquakes in this depth interval, all of them consistent with a P -axis down the dip of the seismic zone, and all of them requiring movement on faults out of the plane of the subducting slab.
Two deep earthquakes near Naples lie well outside the main zone of activity; for one of which a fault-plane solution is available that has a P -axis not aligned with the dip of the seismic zone. The tightly concave slab-geometry favoured by other reports is supported mainly by the location of these events near Naples, which we think may represent deformation in a separate, probably shallower dipping, piece of subducted lithosphere.
The lack of shallow seismicity, and particularly of thrust faulting earthquakes, at the surface projection of the Benioff zone suggests that active subduction has ceased. Estimates of the convergence rate responsible for subduction in the last 10 Myr far exceed the present convergence rate of Africa and Eurasia, suggesting that the subduction was related instead to the stretching and thinning of the crust in the Tyrrhenian Sea. 相似文献
Two deep earthquakes near Naples lie well outside the main zone of activity; for one of which a fault-plane solution is available that has a P -axis not aligned with the dip of the seismic zone. The tightly concave slab-geometry favoured by other reports is supported mainly by the location of these events near Naples, which we think may represent deformation in a separate, probably shallower dipping, piece of subducted lithosphere.
The lack of shallow seismicity, and particularly of thrust faulting earthquakes, at the surface projection of the Benioff zone suggests that active subduction has ceased. Estimates of the convergence rate responsible for subduction in the last 10 Myr far exceed the present convergence rate of Africa and Eurasia, suggesting that the subduction was related instead to the stretching and thinning of the crust in the Tyrrhenian Sea. 相似文献
6.
G. D. Spence R. S. White G. K. Westbrook S. R. Fowler 《Geophysical Journal International》1989,96(2):273-294
Summary. The Hatton Bank passive continental margin exhibits thick seaward dipping reflector sequences which consist of basalts extruded during rifting between Greenland and Rockall Plateau. Multichannel seismic reflection profiling across the margin reveals three reflector wedges with a maximum thickness near 7 km, extending from beneath the upper continental slope to the deep ocean basin. We present results of the velocity structure within the dipping reflector sequences at eight locations across the margin, interpreted by synthetic seismogram modelling a set of multichannel expanding spread profiles parallel to the margin. At the top of some reflector sequences, we observe a series of 100 m thick high- and low-velocity zones, which are interpreted as basalt flows alternating with sediments or weathered and rubble layers. At the profile locations, the base of the dipping reflectors correlates with P -wave velocities near 6.5 km s−1 . However, elsewhere the reflectors appear to extend significantly deeper than the inferred 6.5 km s−1 velocity contour, indicating that the velocity structure may not be controlled solely by lithological boundaries but also by metamorphic effects. Shear-waves were observed on two lines, permitting the calculation of Poisson's ratio. The decrease in Poisson's ratio from 0.28 to near 0.25 in the upper 5 km of crust may also indicate the effect of metamorphism on seismic properties, or alternatively may be explained by crack closure under load. 相似文献
7.
Basement faulting and the focal depths of the larger earthquakes in the Zagros mountains (Iran) 总被引：6，自引：0，他引：6
Summary. The present day seismicity of the Zagros seems to occur on high angle reverse faults distributed across the whole width of the belt. It does not indicate activity on a single inclined thrust surface and there do not seem to have been any well located events at intermediate depths. Modelling of the long period teleseismic body waves of seven large earthquakes presented here shows their focal depths to be in the range 8–15 km. This is thought to indicate faulting in the uppermost basement beneath the sedimentary cover, though the absence of published seismic refraction results renders the sediment thickness uncertain. Faulting of this type and depth may occur on inherited normal faults which have subsequently been reactivated as thrusts. Such reactivation allows considerable shortening to take place in the early stages of continental collision without the subduction or excessive thickening of continental crust. 相似文献
8.
The transition from subduction to continental collision: crustal structure in the North Canterbury region, New Zealand 总被引：1，自引：0，他引：1
The North Canterbury region marks the transition from Pacific plate subduction to continental collision in the South Island of New Zealand. Details of the seismicity, structure and tectonics of this region have been revealed by an 11-week microearthquake survey using 24 portable digital seismographs. Arrival time data from a well-recorded subset of microearthquakes have been combined with those from three explosions at the corners of the microearthquake network in a simultaneous inversion for both hypocentres and velocity structure. The velocity structure is consistent with the crust in North Canterbury being an extension of the converging Chatham Rise. The crust is about 27 km thick, and consists of an 11 km thick seismic upper crust and 7 km thick seismic lower crust, with the middle part of the crust being relatively aseismic. Seismic velocities are consistent with the upper and middle crust being composed of greywacke and schist respectively, while several lines of evidence suggest that the lower crust is the lower part of the old oceanic crust on which the overlying rocks were originally deposited.
The distribution of relocated earthquakes deeper than 15 km indicates that the seismic lower crust changes dip markedly near 43S. To the south-west it is subhorizontal, while to the north-east it dips north-west at about 10. Fault-plane solutions for these earthquakes also change near 43S. For events to the south, P -axes trend approximately normal to the plate boundary (reflecting continental collision), while for events to the north, T -axes are aligned down the dip of the subducted plate (reflecting slab pull). While lithospheric subduction is continuous across the transition, it is not clear whether the lower crust near 43S is flexed or torn. 相似文献
The distribution of relocated earthquakes deeper than 15 km indicates that the seismic lower crust changes dip markedly near 43S. To the south-west it is subhorizontal, while to the north-east it dips north-west at about 10. Fault-plane solutions for these earthquakes also change near 43S. For events to the south, P -axes trend approximately normal to the plate boundary (reflecting continental collision), while for events to the north, T -axes are aligned down the dip of the subducted plate (reflecting slab pull). While lithospheric subduction is continuous across the transition, it is not clear whether the lower crust near 43S is flexed or torn. 相似文献
9.
Gravitational deformation and inherited structural control on slope morphology in the subduction zone of north‐central Chile (ca. 29–33°S) 
下载免费PDF全文
下载免费PDF全文 Juan Becerra César Arriagada Eduardo Contreras‐Reyes Sebastián Bascuñan Gregory P. De Pascale Christian Reichert Juan Díaz‐Naveas Natalia Cornejo 《Basin Research》2017,29(6):798-815
Subduction zones provide direct insight into plate boundary deformation and by studying these areas we better understand tectonic processes and variability over time. We studied the structure of the offshore subduction zone system of the Pampean flat‐slab segment (ca. 29–33°S) of the Chilean margin using seismic and bathymetric constraints. Here, we related and analysed the structural styles of the offshore and onshore western fore‐arc. Overlying the acoustic top of the continental basement, two syn‐extensional seismic sequences were recognised and correlated with onshore geological units and the Valparaíso Forearc Basin seismic sequences: (SII) Pliocene‐Pleistocene and (SI) Miocene‐Pliocene (Late Cretaceous (?) to Miocene‐Pliocene) syn‐extensional sequences. These sequences are separated by an unconformity (i.e. Valparaíso Unconformity). Seismic reflection data reveal that the eastward dipping extensional system (EI) recognised at the upper slope can be extended to the middle slope and controlled the accumulation of the older seismic package (SI). The westward dipping extensional system (EII) is essentially restricted to the middle slope. Here, EII cuts the eastward dipping extensional system (EI), preferentially parallel to the inclination of the older sequences (SI), and controlled a series of middle slope basins which are filled by the Pliocene‐Pleistocene seismic sequence (SII). At the upper slope and in the western Coastal Cordillera, the SII sequence is controlled by eastward dipping faults (EII) which are the local reactivation of older extensional faults (EI). The tectonic boundary between the middle (eastern outermost forearc block) and upper continental slope (western coastal block) is a prominent system of trenchward dipping normal fault scarps (ca. 1 km offset) that resemble a major trenchward dipping extensional fault system. This prominent structural feature can be readily detected along the Chilean erosive margin as well as the two extensional sets (EI and EII). Evidence of slumping, thrusting, reactivated faults and mass transport deposits, were recognised in the slope domain and locally restricted to some eastern dipping faults. These features could be related to gravitational effects or slope deformation due to coseismic deformation. The regional inclination of the pre‐Pliocene sequences favoured the gravitational collapse of the outermost forearc block. We propose that the structural configuration of the study area is dominantly controlled by tectonic erosion as well as the uplift of the Coastal Cordillera, which is partially controlled by pre‐Pliocene architecture. 相似文献
10.
G.S. Fuis E.L. Ambos W.D. Mooney R.A. Page M.A. Fisher T.M. Brocher J.J. Taber 《Geophysical Journal International》1987,89(1):73-78
Summary. The crustal structure beneath the exposed terranes of southern Alaska has been explored using coincident seismic refraction and reflection profiling. A wide-angle reflector at 8–9 km depth, at the base of an inferred low-velocity zone, underlies the Peninsular and Chugach terranes, appears to truncate their boundary, and may represent a horizontal decollement beneath the terranes. The crust beneath the Chugach terrane is characterized by a series of north-dipping paired layers having low and high velocities that may represent subducted slices of oceanic crust and mantle. This layered series may continue northward under the Peninsular terrane. Earthquake locations in the Wrangell Benioff zone indicate that at least the upper two low-high velocity layer pairs are tectonically inactive and that they appear to have been accreted to the base of the continental crust. The refraction data suggest that the Contact fault between two similar terranes, the Chugach and Prince William terranes, is a deeply penetrating feature that separates lower crust (deeper than 10 km) with paired dipping reflectors, from crust without such reflectors. 相似文献
11.
KTB-Research Group Black Forest 《Geophysical Journal International》1987,89(1):325-332
Summary. The unified seismic exploration program, consisting of 345 km of deep reflection profiling, a 200 km refraction profile, an expanding spread profile and near-surface high resolution reflection meaasurements, revealed a strongly differentiated crust beneath the Black Forest. The highly reflective lower crust contains numerous horizontal and dipping reflectors at depths of 13-14 km down to the crust-mantle boundary (Moho). The Moho appears as a flat horizontal first order discontinuity at a relatively shallow level of 25–27 km above a transparent upper mantle. From modelling of synthetic near-vertical and wide-angle seismograms using the reflectivity method the lower crust is supposed to be composed of laminae with an average thickness of about 100 m and velocity differences of greater than 10% increasing from top to bottom. The upper crust is characterised by mostly dipping reflectors, associated with bivergent underthrusting and accretion tectonics of Variscan age and with extensional faults of Mesozoic age. A bright spot at 9.5 km depth is characterised by low velocity material suggesting a fluid trap. It appears on all of the three profiles in the centre of the intersection region. The upper crust seems to be decoupled from the lowest crust by a relatively transparent zone which is' also identified as a low-velocity zone. This low velocity channel is situated directly above the laminated lower crust. The laminae in the Rhinegraben area are displaced vertically to greater depths indicating an origin before Tertiary rift formation and a subsidence of the whole graben wedge. 相似文献
12.
Christopher J. Potter Richard W. Allmendinger Ernest C. Hauser Jack E. Oliver 《Geophysical Journal International》1987,89(1):99-104
Summary. COCORP seismic reflection traverses of the U.S. Cordillera at 40°N and 48.5°N latitude reveal some fundamental similarities as well as significant differences in reflection patterns. On both traverses, autochthonous crust beneath thin-skinned thrust belts of the eastern part of the Cordillera is unreflective; immediately to the west the Cordilleran interior is very reflective above a flat, prominent reflection Moho. Mesozoic accreted terranes in the western part of the orogen are underlain on both traverses by very complex reflection patterns, in constrast to more easily deciphered patterns beneath areas of Cenozoic accretion. The prominent reflection Moho beneath the orogenic interior on both transects probably evolved through a combination of magmatic and deformational processes during Cenozoic extension. The main differences between the two traverses lie in the reflection patterns of the middle and lower crust in the Cordilleran interior; these differences are probably related to the way Cenozoic extension was accommodated at depth. Laminated middle and lower crust above the reflection Moho in the western Basin and Range (40°N) may be related to magmatism, ductile pure shear and large-scale transposition during Cenozoic extension. By contrast, beneath the eastern Basin and Range (40°N), and the orogenic interior in the NW United States (48.5°N), Cenozoic extension was probably accommodated along dipping deformation zones throughout the crust. 相似文献
13.
Hemin A. Koyi A. Geoffrey Milnes Harro Schmeling Christopher J. Talbot Christopher Juhlin & Hermann Zeyen 《Geophysical Journal International》1999,139(2):556-562
Crustal roots formed beneath mountain belts are gravitationally unstable structures, which rebound when the lateral forces that created them cease or decrease significantly relative to gravity. Crustal roots do not rebound as a rigid body, but undergo intensive internal deformation during their rebound and cause intensive deformation within the ductile lower crust. 2-D numerical models are used to investigate the style and intensity of this deformation and the role that the viscosities of the upper crust and mantle lithosphere play in the process of root rebound. Numerical models of root rebound show three main features which may be of general application: first, with a low-viscosity lower crust, the rheology of the mantle lithosphere governs the rate of root rebound; second, the amount of dynamic uplift caused by root rebound depends strongly on the rheologies of both the upper crust and mantle lithosphere; and third, redistribution of the rebounding root mass causes pure and simple shear within the lower crust and produces subhorizontal planar fabrics which may give the lower crust its reflective character on many seismic images. 相似文献
14.
A.G. Green B. Milkereit L. Mayrand C. Spencer R. Kurtz R. M. Clowes 《Geophysical Journal International》1987,89(1):85-90
Summary. Multichannel seismic reflection sections recorded across Vancouver Island have revealed two extensive zones of deep seismic reflections that dip gently to the northeast, and a number of moderate northeasterly dipping reflections that can be traced to the surface where major faults are exposed. Based on an integrated interpretation of these data with information from gravity, heat flow, seismicity, seismic refraction, magnetotelluric and geological studies it is concluded that the lower zone of gently dipping reflections is due to underplated oceanic sediments and igneous rocks associated with the current subduction of the Juan de Fuca plate, and that the upper zone represents a similar sequence of accreted rocks associated with an earlier episode of subduction. The high density/high velocity material between the two reflection zones is either an underplated slab of oceanic lithosphere or an imbricated package of mafic rocks. Reprocessing of data from two of the seismic lines has produced a remarkable image of the terrane bounding Leech River fault, with its dip undulating from >60° near the surface to 20° at 3 km depth and ∼38° at 6 km depth. 相似文献
15.
Summary. The first DEKORP profile, DEKORP 2-S, a 250 km long line perpendicular to the Variscan strike direction, has provided evidence of major crustal shortening during the Variscan orogeny. Sporadic dipping events in a generally transparent upper crust are interpreted as thrust faults, while the highly reflective lower crust fits into the general picture of Palaeozoic provinces. Correlations are established between certain reflectivity patterns and rheology. Moho depths and reflecting lamellae are considered to be post-Variscan. 相似文献
16.
Alfred Hirn Luisa Senos Martine Sapin Luis Mendes Victor 《Geophysical Journal International》1982,70(1):1-10
Summary. Seismic probing of the upper crust in a catazonal massif in Tras os Montes, Hercynian Iberia, demonstrates the absence of a root towards the lower crust and favours a mechanism of thrust and nappe emplacement. Similar high to low velocity successions in the upper crust are evidenced in particular segments of the Hercynian domain of France. All these occurrences are related to a type region to which a particular meaning has been given in a recent plate tectonics interpretation of the Hercynian orogenesis. This model, implying large-scale nappe displacement and intracrustal thrusts furnishes in turn a general mechanism for the tectonic formation of upper crustal high and low velocity layers of limited extent in orogenic cycles. 相似文献
17.
Initiation and growth of salt-based thrust belts on passive margins: results from physical models 总被引：1，自引：0，他引：1
Scaled sandbox models simulated primary controls on the kinematics of the early structural evolution of salt‐detached, gravity‐driven thrust belts on passive margins. Models had a neutral‐density, brittle overburden overlying a viscous décollement layer. Deformation created linked extension–translation–shortening systems. The location of initial brittle failure of the overburden was sensitive to perturbations at the base of the salt. Salt pinch‐out determined the seaward limit of the thrust belt. The thrust belts were dominated by pop‐up structures or detachment folds cut by break thrusts. Pop‐ups were separated by flat‐bottomed synclines that were partially overthrust. Above a uniformly dipping basement, thrusts initiated at the salt pinch‐out then consistently broke landward. In contrast, thrust belts above a seaward‐flattening hinged basement nucleated above the hinge and then spread both seaward and landward. The seaward‐dipping taper of these thrust belts was much lower than typical, frictional, Coulomb‐wedge models. Towards the salt pinch‐out, frictional resistance increased, thrusts verged strongly seawards and the dip of the taper reversed as the leading thrust overrode this pinch‐out. We attribute the geometry of these thrust belts to several causes. (1) Low friction of the basal décollement favours near‐symmetric pop‐ups. (2) Mobile salt migrates away from local loads created by overthrusting, which reduces the seaward taper of the thrust belt. (3) In this gravity‐driven system, shortening quickly spreads to form wide thrust belts, in which most of the strain overlapped in time. 相似文献
18.
Summary. Five marine multichannel seismic reflection profiles totalling 520 km were recorded across the western Canada convergent margin where the Juan de Fuca plate is subducting beneath North America. The data extend the results of LITHOPROBE on Vancouver Island. The primary objectives are definition of the offshore accretionary structures and clarification of the convergent interaction between the two plates. The main features of this preliminary interpretation are: (1) the subduction deformation front is complex with evidence of sediments being accreted and subducted; (2) the top of the oceanic crust and the Mono are imaged below the deep water sedimentary basin; (3) the top of the subducting plate is clearly imaged below the shelf; (4) beneath the inner shelf, one band of high reflectivity underlain by a zone of lesser reflectivity lies above the plate; (5) alternative interpretations place the present zone of decoupling at the base of the reflective band or the top of the plate; (6) the San Juan and Leech River faults that bound small accreted terranes are imaged as thrusts that merge at depth. 相似文献
19.
Summary . In this paper we present laboratory measurements of compressional and shear wave velocities of a diverse suite of gabbroic rocks collected from the walls of the Mid-Cayman Spreading Centre with DSRV Alvin. The degree of deformation and alteration affecting these gabbros is quite variable, and we believe that they are typical of plutonic rocks emplaced at shallow levels (upper portion of seismic layer 3 and shallower) of the oceanic crust. The compositional and textural variations are reflected in the wide range of laboratory velocities which span most of the range of seismic velocities reported for oceanic and ophiolite rock samples including basalts, gabbros, ultramafics, and their altered derivatives. Based upon the laboratory velocities and the geological setting of the Mid-Cayman gabbros, it is argued that no unique lithology, except anhydrous peridotite, can be unequivocally identified in the oceanic lithosphere from seismic velocity data alone. Furthermore, these data allow for the possibility of considerable lithologic heterogeneity within portions of the oceanic crust at the scale of a few centimetres to a few hundred metres. Such heterogeneities would go unrecognized because seismic refraction studies mask these variations resulting in a picture of apparent uniformity. 相似文献
20.
F. Masson A. W. B. Jacob C. Prodehl P. W. Readman P. M. Shannon A. Schulze & U. Enderle 《Geophysical Journal International》1998,134(3):689-705
A wide-angle seismic profile across the western peninsulas of SW Ireland was performed. This region corresponds to the northernmost Variscan thrust and fold deformation. The dense set of 13 shots and 109 stations along the 120 km long profile provides a detailed velocity model of the crust.
The seismic velocity model, obtained by forward and inverse modelling, defines a five-layer crust. A sedimentary layer, 5–8 km thick, is underlain by an upper-crustal layer of variable thickness, with a base generally at a depth of 10–12 km. Two mid-crustal layers are defined, and a lower-crustal layer below 22 km. The Moho lies at a depth of 30–32 km. A low-velocity zone, which coincides with a well-defined gravity low, is observed in the central part of the region and is modelled as a Caledonian granite which intruded upper-crustal basement. The granite may have acted as a buffer to northward-directed Variscan thrusting. The Dingle–Dungarvan Line (DDL) marks a major change in sedimentary and crustal velocity and structure. It lies immediately to the north of the velocity and gravity low, and shows thickness and velocity differences in many of the underlying crustal layers and even in the Moho. This suggests a deep, pre-Variscan control of the structural development of this area. The model is compatible with thin-skinned tectonics, which terminated at the DDL and which incorporated thrusts involving the sedimentary and upper-crustal layers. 相似文献
The seismic velocity model, obtained by forward and inverse modelling, defines a five-layer crust. A sedimentary layer, 5–8 km thick, is underlain by an upper-crustal layer of variable thickness, with a base generally at a depth of 10–12 km. Two mid-crustal layers are defined, and a lower-crustal layer below 22 km. The Moho lies at a depth of 30–32 km. A low-velocity zone, which coincides with a well-defined gravity low, is observed in the central part of the region and is modelled as a Caledonian granite which intruded upper-crustal basement. The granite may have acted as a buffer to northward-directed Variscan thrusting. The Dingle–Dungarvan Line (DDL) marks a major change in sedimentary and crustal velocity and structure. It lies immediately to the north of the velocity and gravity low, and shows thickness and velocity differences in many of the underlying crustal layers and even in the Moho. This suggests a deep, pre-Variscan control of the structural development of this area. The model is compatible with thin-skinned tectonics, which terminated at the DDL and which incorporated thrusts involving the sedimentary and upper-crustal layers. 相似文献