首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 406 毫秒
1.
An integrated approach involving volcanology, geochemistry and numerical modelling has enabled the reconstruction of the volcanic history of the Fox kimberlite pipe. The observed deposits within the vent include a basal massive, poorly sorted, matrix supported, lithic fragment rich, eruption column collapse lapilli tuff. Extensive vent widening during the climactic magmatic phase of the eruption led to overloading of the eruption column with cold dense country rock lithic fragments, dense juvenile pyroclasts and olivine crystals, triggering column collapse. > 40% dilution of the kimberlite by granodiorite country rock lithic fragments is observed both in the physical componentry of the rocks and in the geochemical signature, where enrichment in Al2O3 and Na2O compared to average values for coherent kimberlite is seen. The wide, deep, open vent provided a trap for a significant proportion of the collapsing column material, preventing large scale run-away in the form of pyroclastic flow onto the ground surface, although minor flows probably also occurred. A massive to diffusely bedded, poorly sorted, matrix supported, accretionary-lapilli bearing, lithic fragment rich, lapilli tuff overlies the column collapse deposit providing evidence for a late phreatomagmatic eruption stage, caused by the explosive interaction of external water with residual magma. Correlation of pipe morphology and internal stratigraphy indicate that widening of the pipe occurred during this latter stage and a thick granodiorite cobble-boulder breccia was deposited. Ash- and accretionary lapilli-rich tephra, deposited on the crater rim during the late phreatomagmatic stage, was subsequently resedimented into the vent. Incompatible elements such as Nb are used as indicators of the proportion of the melt fraction, or kimberlite ash, retained or removed by eruptive processes. When compared to average coherent kimberlite the ash-rich deposits exhibit ~ 30% loss of fines whereas the column collapse deposit exhibits ~ 50% loss. This shows that despite the poorly sorted nature of the column collapse deposit significant elutriation has occurred during the eruption, indicating the existence of a high sustained eruption column. The deposits within Fox record a complex eruption sequence showing a transition from a probable violent sub-plinian style eruption, driven by instantaneous exsolution of magmatic volatiles, to a late phreatomagmatic eruption phase. Mass eruption rate and duration of the sub-plinian phase of the eruption have been determined based on the dimensions of milled country-rock boulders found within the intra-vent deposits. Calculations show a short lived eruption of one to eleven days for the sub-plinian magmatic phase, which is similar in duration to small volume basaltic eruptions. This is in general agreement with durations of kimberlite eruptions calculated using entirely different approaches and parameters, such as predictions of magma ascent rates in kimberlite dykes.  相似文献   

2.
Kimberlite volcanism in the Upper Cretaceous Gibeon Kimberlite Field, southern Namibia, consisting of at least 42 diatremes and a number of associated dykes, is closely related to carbonatitic and ultrabasic volcanic and intrusive activity which occurred at the margin of the Field. The volcanology of the diatremes and dykes as well as their structural setting is reported here. Because of the paleohydrogeological setting, and since juvenile kimberlite occurring in dykes, intrusive plugs, and spherical lapilli is devoid of vesicles, a phreatomagmatic eruption mechanism is proposed for the genesis of the kimberlite diatremes. Karoo dolerite, basalt and sediment xenoliths in the diatremes provide evidence for the former extent of Karoo strata at the time of eruption.  相似文献   

3.
Most if not all kimberlite pipes show a multitude of facies types, which imply that the pipes were emplaced under an episodic re-occurrence of eruptive phases, often with intermittent phases of volcanic quiescence. The majority of these facies can be related to either the fragmentation behaviour of the magma during emplacement or changing conditions during sedimentation of volcaniclastic deposits, as well as their alteration and compaction after deposition. An additional factor controlling pipe-facies architecture is the degree of mobility of the loci of explosions in the explosion chambers of the root zone or root zones at the base of the maar-diatreme volcano. In a growing pipe, the root zone moves downward and, with that movement, the overlying diatreme enlarges both in size and diameter. However, during the life span of the volcano, the explosion chamber can also move upward, back into the lower diatreme, where renewed explosions result in the destruction of older deposits and their structures. Next to vertical shifts of explosion chambers, the loci of explosions can also move laterally along the feeder dyke or dyke swarm. This mobility of explosion chambers results in a highly complex facies architecture in which a pipe can be composed of several separate root zones that are overlain by an amalgamated, crosscutting diatreme and maar crater with several lobes. Pipe complexity is amplified by periodic changes of the fragmentation behaviour and explosivity of kimberlite magma. Recent mapping and logging results of Canadian and African kimberlite pipes suggest that kimberlite magma fragmentation ranges from highly explosive with abundant entrained country rock fragments to weakly explosive spatter-like production with scarce xenoliths. On occasions, spatter may even reconstitute and form a texturally coherent deposit on the crater floor. In addition, ascending kimberlite magma can pass the loci of earlier fragmentation events in the root zone and intrudes as coherent hypabyssal kimberlite dykes in high pipe levels or forms extrusive lava lakes or flows on the crater floor or the syneruptive land surface, respectively. This highly variable emplacement behaviour is typical for basaltic maar-diatreme volcanoes and since similar deposits can also be found in kimberlites, it can be concluded that also the volcanological processes leading to these deposits are similar to the ones observed in basaltic pipes.  相似文献   

4.
Kimberlite in certain dykes and in the deepest parts of some diatremes show textural and other features which contrast with those in the breccia diatremes. Some hypabyssal kimberlite intrusions show relatively high-temperature contact phenomena including baking of country-rock sediments and sedimentary xenoliths, and contrasting with the brecciated texture of most diatreme-facies kimberlites, in the hypabyssal kimberlites are numerous examples of preferred orientation of inequidimensional minerals (? trachytic flow texture), and rapid mineralogical gradients from the contact towards the dyke centres that may be attributable to flowage differentiation. In the Benfontein sill (Kimberley area) there is well-developed horizontal banding due to gravitational settling, and pseudo-sedimentary structures are also present. The accumulated evidence indicates that kimberlite existed as a relatively hot fluid up to depths of 2–3 km below the land-surface at the time of intrusion; above this level, gas release caused diatreme formation, brecciation and adiabatic cooling. These views are contrary to those of geologists who postulate eruption of kimberlite as a cold breccia directly from the mantle or deep within the crust, but accords with the views of many Russian geologsts who accept the existence of kimberlite magma, the extrusive equivalent of which is the ultrabasic lava meimechite.  相似文献   

5.
Surface dissolution features on diamonds and Fourier Transform Infra Red spectroscopy (FTIR) of phenocrystal and xenocrystal olivines from kimberlites contain a record of magmatic fluid in kimberlite magmas. We investigated composition and behavior of kimberlitic fluid and the effect of volatiles on the eruption style and geology of kimberlites using microdiamonds and olivine concentrates from six kimberlite pipes with different lithologies and the character of diamond resorption (Ekati Diamond Mine, Northwest Territories, Canada). The study showed a clear correlation between the resorption style of diamond population of the kimberlites and the type of infrared (IR) spectra of their olivines. Four kimberlites have high quality diamonds with smooth regular surface features and high H2O content of the olivines indicating the presence of H2O-rich fluid during the emplacement. Fast ascent rates of fluid-rich magma can explain explosive eruption and filling the pipes with volcaniclastic kimberlite facies. Conversely, Grizzly and Leslie kimberlites have diamonds with complex sharp features diminishing diamond quality and indicating loss of the fluid. The slower ascent rates and less explosive eruption of the fluid-free magmas produced kimberlite pipes filled with magmatic facies kimberlite. Distinctive peaks in olivine IR spectra at 3356 and 3327 cm? 1 were found to correlate with the presence of hydrous magmatic fluid. Character of diamond morphology suggests that during the whole ascent of all six kimberlites, the magmatic fluid when present had a high H2O:CO2 ratio.  相似文献   

6.
The ultramafic Eocene Missouri River Breaks volcanic field (MRBVF, Montana, USA) includes over 50 diatremes emplaced in a mostly soft substrate. The current erosion level is 1.3–1.5 km below the pre-eruptive surface, exposing the deep part of the diatreme structures and some dikes. Five representative diatremes are described here; they are 200-375 m across and have sub-vertical walls. Their infill consists mostly of 55-90 % bedded pyroclastic rocks (fine tuffs to coarse lapilli tuffs) with concave-upward bedding, and 45–10 % non-bedded pyroclastic rocks (medium lapilli tuffs to tuff breccias). The latter zones form steep columns 15–135 m in horizontal dimension, which cross-cut the bedded pyroclastic rocks. Megablocks of the host sedimentary formations are also present in the diatremes, some being found 1 km or more below their sources. The diatreme infill contains abundant lithic clasts and ash-sized particles, indicating efficient fragmentation of magma and country rocks. The spherical to sub-spherical juvenile clasts are non-vesicular. They are accompanied by minor accretionary lapilli and armored lapilli. The deposits of dilute pyroclastic density currents are locally observed. Our main interpretations are as follows: (1) the observations strongly support phreatomagmatic explosions as the energy source for fragmentation and diatreme excavation; (2) the bedded pyroclastic rocks were deposited on the crater floor, and subsided by 1.0–1.3 km to their current location, with subsidence taking place mostly during the eruption; (3) the observed non-bedded pyroclastic columns were created by debris jets that punched through the bedded pyroclastic material; the debris jets did not empty the mature diatreme, occupying only a fraction of its width, and some debris jets probably did not reach the crater floor; (4) the mature diatreme was nearly always filled and buttressed by pyroclastic debris at depth – there was never a 1.3–1.5-km-deep empty hole with sub-vertical walls, otherwise the soft substrate would have collapsed inward, which it only did near the surface, to create the megablocks. We infer that syn-eruptive subsidence shifted down bedded pyroclastic material and shallow sedimentary megablocks by 0.8–1.1 km or more, after which limited post-eruptive subsidence occurred. This makes the MRBVF diatremes an extreme end-member case of syn-eruptive subsidence in the spectrum of possibilities for maar-diatreme volcanoes worldwide.  相似文献   

7.
The BK9 kimberlite consists of three overlapping pipes. It contains two dark varieties of massive volcaniclastic kimberlite, informally termed dark volcaniclastic kimberlite (DVK). DVK(ns) is present in the north and south pipes and is interbedded with lenses of basalt breccia at the margins of the pipes. DVK(c) is present within the central pipe where it is overlain by a sequence of basalt breccias with interbedded volcanogenic sediments. The features observed within the DVK units of the BK9 kimberlite provide strong evidence for gas fluidisation of the accumulating pyroclastic material. These include the massive interior of the pipes, marginal epiclastic units, well-dispersed country-rock xenoliths and small-scale heterogeneities in lithic clast abundance. The upper portions of the central pipe provide a record of the transition from pyroclastic eruption and infill to passive epiclastic infilling of the crater, after the eruption has ceased. The wall-rock of the BK9 kimberlite dips inwards and is interpreted as post pipe-fill subsidence of the adjacent country rock. The two DVK units contain interstitial, silt-sized pyroclasts. The DVK(ns) has a higher fraction of former melt and displays evidence of incipient welding, as a result of differences in eruption dynamics. These units demonstrate that whilst DVK is comparable in many respects to MVK and forms part of a spectrum of volcaniclastic rocks formed by fluidisation, it differs in frequently containing silt-sized particles and including agglutinated and welded varieties with a high melt fraction. The DVK varieties, studied here, also have a distinctive hydrothermal assemblage, resulting from the abundance of low-silica accidental lithic clasts. Both the hydrothermal alteration and the abundance of silt-sized particles contribute to the DVKs distinctive dark colour.  相似文献   

8.
The Campanian Ignimbrite (36000 years B.P.) was produced by the explosive eruption of at least 80 km3 DRE of trachytic ash and pumice which covered most of the southern Italian peninsula and the eastern Mediterranean region. The eruption has been related to the 12-x15-km-diameter caldera located in the Phlegraean Fields, west of Naples. Proximal deposits on the periphery of the Phlegraean Fields comprise the following pyroclastic sequence from base to top: densely welded ignimbrite and lithic-rich breccias (unit A); sintered ignimbrite, low-grade ignimbrite and lithic-rich breccia (unit B); lithic-rich breccia and spatter agglutinate (unit C); and low-grade ignimbrite (unit D). Stratigraphic and componentry data, as well as distribution of accidental lithic types and the composition of pumice clasts of different units, indicate that coarse, lithic-rich breccias were emplaced at different stages during the eruption. Lower breccias are associated with fines-rich ignimbrites and are interpreted as co-ignimbrite lag breccia deposits. The main breccia unit (C) does not grade into a fines-rich ignimbrite, and therefore is interpreted as formed from a distinct lithic-rich flow. Units A and B exhibit a similar pattern of accidental lithic types, indicating that they were erupted from the same area, probably in the E of the caldera. Units C and D display a distinct pattern of lithics indicating expulsion from vent(s) that cut different areas. We suggest that unit C was ejected from several vents during the main stage of caldera collapse. Field relationships between spatter agglutinate and the breccia support the possibility that these deposits were erupted contemporaneously from vents with different eruptive style. The breccia may have resulted from a combination of magmatic and hydrothermal explosive activity that accompanied extensive fracturing and subsidence of the magma-chamber roof. The spatter rags probably derived from sustained and vigorous pyroclastic fountains. We propose that the association lithic-rich breccia and spatter agglutinate records the occurrence of catastrophic piecemeal collapse.  相似文献   

9.
K2 is a steep-sided kimberlite pipe with a complex internal geology. Geological mapping, logging of drillcore and petrographic studies indicate that it comprises layered breccias and pyroclastic rocks of various grain sizes, lithic contents and internal structures. The pipe comprises two geologically distinct parts: K2 West is a layered sequence of juvenile- and lithic-rich breccias, which dip 20–45° inwards, and K2 East consists of a steep-sided pipe-like body filled with massive volcaniclastic kimberlite nested within the K2 pipe. The layered sequence in K2 West is present to > 900 m below present surface and is interpreted as a sequence of pyroclastic rocks generated by explosive eruptions and mass-wasting breccias generated by rock fall and sector collapse of the pipe walls: both processes occurred in tandem during the infill of the pipe. Several breccia lobes extend across the pipe and are truncated by the steep contact with K2 East. Dense pyroclastic rocks within the layered sequence are interpreted as welded deposits. K2 East represents a conduit that was blasted through the layered breccia sequence at a late stage in the eruption. This phase may have involved fluidisation of trapped pyroclasts, with loss of fine particles and comminution of coarse clasts. We conclude that the K2 kimberlite pipe was emplaced in several distinct stages that consisted of an initial explosive enlargement, followed by alternating phases of accumulation and ejection.  相似文献   

10.
In this paper we present a model for the growth of a maar-diatreme complex in a shallow marine environment. The Miocene-age Costa Giardini diatreme near Sortino, in the region of the Iblei Mountains of southern Sicily, has an outer tuff ring formed by the accumulation of debris flows and surge deposits during hydromagmatic eruptions. Vesicular lava clasts, accretionary lapilli and bombs in the older ejecta indicate that initial eruptions were of gas-rich magma. Abundant xenoliths in the upper, late-deposited beds of the ring suggest rapid magma ascent, and deepening of the eruptive vent is shown by the change in slope of the country rock. The interior of the diatreme contains nonbedded breccia composed of both volcanic and country rock clasts of variable size and amount. The occurrence of bedded hyaloclastite breccia in an isolated outcrop in the middle-lower part of the diatreme suggests subaqueous effusion at a low rate following the end of explosive activity. Intrusions of nonvesicular magma, forming plugs and dikes, occur on the western side of the diatreme, and at the margins, close to the contact between breccia deposits and country rock; they indicate involvement of volatile-poor magma, possibly during late stages of activity. We propose that initial hydromagmatic explosive activity occurred in a shallow marine environment and the ejecta created a rampart that isolated for a short time the inner crater from the surrounding marine environment. This allowed explosive activity to draw down the water table in the vicinity of the vent and caused deepening of the explosive center. A subsequent decrease in the effusion rate and cessation of explosive eruptions allowed the crater to refill with water, at which time the hyaloclastite was deposited. Emplacement of dikes and plugs occurred nonexplosively while the breccia sediment was mostly still soft and unconsolidated, locally forming peperites. The sheltered, low-energy lagoon filled with marine limestones mixed with volcaniclastic material eroded from the surrounding ramparts. Ultimately, lagoonal sediments accumulated in the crater until subsidence or erosion of the tuff ring caused a return to normal shallow marine conditions.  相似文献   

11.
Palaeomagnetic techniques for estimating the emplacement temperatures of volcanic deposits have been applied to pyroclastic and volcaniclastic deposits in kimberlite pipes in southern Africa. Lithic clasts were sampled from a variety of lithofacies from three pipes for which the internal geology is well constrained (the Cretaceous A/K1 pipe, Orapa Mine, Botswana, and the Cambrian K1 and K2 pipes, Venetia Mine, South Africa). The sampled deposits included massive and layered vent-filling breccias with varying abundances of lithic inclusions, layered crater-filling pyroclastic deposits, talus breccias and volcaniclastic breccias. Basalt lithic clasts in the layered and massive vent-filling pyroclastic deposits in the A/K1 pipe at Orapa were emplaced at >570°C, in the pyroclastic crater-filling deposits at 200–440°C and in crater-filling talus breccias and volcaniclastic breccias at <180°C. The results from the K1 and K2 pipes at Venetia suggest emplacement temperatures for the vent-filling breccias of 260°C to >560°C, although the interpretation of these results is hampered by the presence of Mesozoic magnetic overprints. These temperatures are comparable to the estimated emplacement temperatures of other kimberlite deposits and fall within the proposed stability field for common interstitial matrix mineral assemblages within vent-filling volcaniclastic kimberlites. The temperatures are also comparable to those obtained for pyroclastic deposits in other, silicic, volcanic systems. Because the lithic content of the studied deposits is 10–30%, the initial bulk temperature of the pyroclastic mixture of cold lithic clasts and juvenile kimberlite magma could have been 300–400°C hotter than the palaeomagnetic estimates. Together with the discovery of welded and agglutinated juvenile pyroclasts in some pyroclastic kimberlites, the palaeomagnetic results indicate that there are examples of kimberlites where phreatomagmatism did not play a major role in the generation of the pyroclastic deposits. This study indicates that palaeomagnetic methods can successfully distinguish differences in the emplacement temperatures of different kimberlite facies.  相似文献   

12.
The Ferrar large igneous province of Antarctica contains significant mafic volcaniclastic deposits, some of which are interpreted to fill large vent complexes. Such a complex was re-examined at Coombs Hills to map individual steep-sided cross-cutting bodies in detail, and we found several contrasting types, two of which are interpreted to have filled subterranean passageways forcefully opened from below into existing, non-consolidated debris. These transient conduits were opened because of the propagation of debris jets – upward-moving streams of volcaniclastic debris, steam, magmatic gases +/− liquid water droplets – following explosive magma–aquifer interaction. Some debris jets probably remained wholly subterranean, whereas others made it to the surface, but the studied outcrops do not allow us to differentiate between these cases. The pipes filled with country rock-rich lapilli-tuff or tuff-breccia are interpreted to have formed following phreatomagmatic explosions occurring near the walls or floor of the vent complex, causing fragmentation of both magma and abundant country rock material. In contrast, some of the cross-cutting zones filled with basalt-rich tuff-breccia or lapilli-tuff could have been generated following explosions taking place within pre-existing basalt-bearing debris, well away from the complex walls or floor. We infer that once focused jets were formed, they did not incorporate significant amounts of existing debris while travelling through them; instead, incorporation of fragments from the granular host took place near explosion sites. Other basalt-rich tuff-breccia zones, accompanied by domains of in situ peperite and coherent basalt pods, are inferred to have originated by less violent processes.  相似文献   

13.
The Nyamaji volcano is a small eruptive complex of late Miocene age associated with the nearby Usaki ijolite and Sokolo carbonatite intrusion of Homa Bay in the Kavirondo Rift valley of Kenya. It is probably a satellite volcano to the major volcanic structure of Kisingiri - Rangwa which lies 25 km to the west. The Nyamaji volcanic complex is composed of agglomerates, breccias and tuffs erupted from a central vent, whilst at much the same time lavas were extruded from fissures which are now occupied by dykes. These two contemporaneous events gave rise to an interdigitated sequence of pyroclastic deposits and effusive lavas. The pyroclastic rocks of Vulcanian origin cover an area at least 30 km2 in extent, are poorly bedded, and usually are about 25 m (80ft.) thick though they often thin to zero over topographic highs in the pre-existing landscape. At Nyamaji itself, the Strombolian style pyroclastic pile exceeds 330 m (1100 ft.) in thickness over an area of 1 km2, and this marks the position of the original central vent. The fragmental material in the pyroclastic rocks includes ijolite, phonolite, nephelinite, trachyte, carbonatite, granite, and feldspathic and aegirine-bearing fenites; the matrix is sometimes calcareous, sometimes feldspathic. Nephelinitic lavas occur amongst the lowest lavas, but the lavas above are nearly all phonolitic. The oldest dykes are nephelinitic and are rare; the youngest dykes are phonolitic and are abundantly exposed. Both lavas and dykes contain xenoliths similar to those in the pyroclastic rocks. A series of volcanic plugs pierce the lavas. These plugs, mostly non-conduit type, average 200–500 m diameter, are mainly composed of glassy to very fine-grained phonolites, and show good flow structures. The plugs, especially those near the Ruri hills, tend to lie along N - S and E - W lines. The majority of the dykes also lie along these directions. The dominant structural directions within the nearby Usaki ijolite complex and the Wasaki carbonatite are also N - S and E - W, respectively. These directions are quite different from the axis of the Kavirondo rift valley which here is NE - SW, and from the strike of the Precambrian basement. The Nyamaji volcanic structure differs from nearly all the other East African volcanoes by its dominant phonolitic petrochemistry.  相似文献   

14.
 Reworked volcaniclastics are traditionally discriminated from primary tephra-fall pyroclastics by an absence of features such as blanketing, juvenile lapilli, grain welding and poor sorting. Frequently, these features are difficult to identify, especially in small outcrops, ancient or altered successions, debris flows and surge deposits. Crystal-rich volcaniclastics, such as kimberlites, have a large proportion of coarse euhedral crystals, and abrasion leading to rounding can be recognised and classified with relative ease. A petrographic method of discriminating reworked material has been devised, based on the degree of grain roundness, and is illustrated using volcaniclastic kimberlite from Fort a la Corne, Saskatchewan, Canada. Petrographic thin sections of samples at regular intervals throughout the borehole core, and from a nearby crater-facies kimberlite, show that the percentages of rounded, subrounded and euhedral grains define two distinct groupings. The first group contains a higher percentage of euhedral grains and includes all the samples from the basal 4.8 m of the 14.1-m-thick kimberlite section in borehole 004, and all of the crater facies tephra-fall tuffs. A second group contains more rounded, subrounded and fragmental grains and includes all the data from the upper 6.3 m, which are interpreted as reworked strata. Thus, point counting concurs with hand-sample interpretation and may be used as a verification tool in discriminating reworked pyroclastic sands from primary tephra-fall tuffs. Received: 27 August 1996 / Accepted: 31 May 1997  相似文献   

15.
Diamantiferous diatremes usually occur in the old platforms and shields where deep fractures are «blind»,i.e., these fractures do not come out to the earth surface. Alkaline-ultrabasic magma ascending along these fractures and encountering an impervious cap of sedimentary and/or volcanic rocks had formed, between the cap and the basemnet rocks, intermediate chambers in which the crystallization of diamonds took place. Under the influence of the increasing pressures in these chambers, the roofs were destroyed and diamantiferous diatremes, dykes and veins of kimberlite have been formed. These diatremes are filled with a typical eruptive breccia in which the fragmental material, formed by the destructive explosion of the magma chamber roof, is cemented by a porphyritic, alkaline-ultrabasic rock known under the name of kimberlite.  相似文献   

16.
The Llangorse volcanic field is located in northwest British Columbia, Canada, and comprises erosional remnants of Miocene to Holocene volcanic edifices, lava flows or dykes. The focus of this study is a single overthickened, 100-m-thick-valley-filling lava flow that is Middle-Pleistocene in age and located immediately south of Llangorse Mountain. The lava flow is basanitic in composition and contains mantle-derived peridotite xenoliths. The lava directly overlies a sequence of poorly sorted, crudely bedded volcaniclastic debris-flow sediments. The debris flow deposits contain a diverse suite of clast types, including angular clasts of basanite lava, blocks of peridotite coated by basanite, and rounded boulders of granodiorite. Many of the basanite clasts have been palagonitized. The presence and abundance of clasts of vesicular to scoriaceous, palagonitized basanite and peridotite suggest that the debris flows are syngenetic to the overlying lava flow and sampled the same volcanic vent during the early stages of eruption. They may represent lahars or outburst floods related to melting of a snow pack or ice cap during the eruption. The debris flows were water-saturated when deposited. The rapid subsequent emplacement of a thick basanite flow over the sediments heated pore fluids to at least 80–100°C causing in-situ palagonitization of glassy basanite clasts within the sediments. The over-thickened nature of the Llangorse Mountain lavas suggests ponding of the lava against a down-stream barrier. The distribution of similar-aged glaciovolcanic features in the cordillera suggests the possibility that the barrier was a lower-elevation, valley-wide ice-sheet.  相似文献   

17.
Coarse fragmental rocks, previously interpreted as primary pyroclastic accumulations infilling flared vents (Richey JE 1938) “The rhythmic eruptions of Ben Hiant, Ardnamurchan, a tertiary volcano. Bull Volcanol” 2(3):1–21), are re-interpreted as predominantly debris flow deposits, with minor hyperconcentrated and stream-flow deposits, temporally and spatially associated with the Palaeogene Ardnamurchan Central Complex (ACC), NW Scotland. These volcaniclastic rocks are conglomerates and breccias, interbedded with siltstones and sandstones, which formed by surface processes on a dissected landscape, developed in response to shallow emplacement of the ACC. Clast-matrix and photo-statistical analyses allow the palaeo-topography and drainage system to be reconstructed and the development of a palaeo-geographic model for the volcanic landscape. Slabs of basalt, dolerite and sandstone were transported as megablocks during catastrophic, gravity-driven events. Lower energy intervals during volcanic hiatuses are marked by lacustrine-fluvial volcaniclastic siltstones and sandstones preserving palynomorph assemblages. We suggest that shallow intrusion is a plausible initiation mechanism for mass wasting in other large igneous provinces. Historically, deposits of the type described here may have been misidentified as vent facies pyroclastic materials.  相似文献   

18.
This study assessed the levels of marine debris pollution and identified its main sources in Korea. The surveys were bimonthly conducted by NGO leaders and volunteers on 20 beaches from March 2008 to November 2009. The quantities of marine debris were estimated at 480.9 (±267.7) count ⋅ 100 m−1 for number, 86.5 (±78.6) kg ⋅ 100 m−1 for weight, and 0.48 (±0.38) m3 ⋅ 100 m−1 for volume. The level of marine debris pollution on the Korean beaches was comparable to that in the coastal areas of the North Atlantic ocean and South Africa. Plastics and styrofoam occupied the majority of debris composition in terms of number (66.7%) and volume (62.3%). The main sources of debris were fishing activities including commercial fisheries and marine aquaculture (51.3%). Especially styrofoam buoy from aquaculture was the biggest contributor to marine debris pollution on these beaches.  相似文献   

19.
The Cana Creek Tuff is one of four rhyolitic ignimbrite members of the Late Carboniferous Currabubula Formation, a volcanogenic conglomeratic braidplain sequence exposed along the western margin of the New England Orogen in northeastern New South Wales. The source is not exposed but was probably located tens of kilometres to the west of existing outcrops. The medial to distal parts of the tuff average about 70 m in thickness, are widespread (minimum present area 1400 km2), and comprise a primary pyroclastic facies (ignimbrite, ash-fall tuff) and a redeposited volcaniclastic facies (sandstone, conglomerate). Both facies are composed of differing proportions of crystal fragments (quartz, plagioclase, K-feldspar), pumiceous clasts (pumice, shards, fine ash), and accidental lithics. The eruption responsible for this unit was explosive and of large magnitude (dense rock equivalent volume about 100 km3). That it was also phreatomagmatic in character is proposed on the basis of: the intimate association of primary and redeposited facies; the presence of accretionary lapilli both in ignimbrite and in ash-fall tuff; the fine grain size of juvenile pyroclasts; the low grade of the ignimbrite; and the close similarity in facies, composition and magnitude to the deposits from the 20,000y. B.P. phreatomagmatic eruption at Taupo, New Zealand (the Wairakei and parts of the Hinuera Formations). The eruption began and ended from a vent with excess water available, possibly submersed in a caldera lake, and generated volcaniclastic sheet floods and debris flows. The emplacement of the primary pyroclastic facies is correlated with an intervening stage when the water:magma mass ratio was lower. The deposits from a large-magnitude, phreatomagmatic eruption are predicted to show systematic lateral variations in facies. Primary pyroclastic facies predominate near the source although the preserved stratigraphy is an incomplete record because of widespread contemporaneous erosion. Volcaniclastic facies, redeposited from proximal sites by floods, dominate at medial and distal locations. In areas hundreds of kilometres from the source, the eruption is registered by thin layers of fine-grained airfall ash.  相似文献   

20.
It is known that the lamproites occur in the southeastern Guizhou Province and in the Dahong Mountains area, Hubei Province; and many para-lamproite occurrences spread in the west half part of the South China landmass. The para-larnproite diatremes in Ningxiang County, Hunan Province, contain a few of fine grains of diamond. Parts of the kimberlite pipes and dykes in Mengyin County, Shandong Province, consist locally of basic kimberlite; and the kimberlite dykes in the Maping kimberlite area, Zhenyuan County, Guizhou Province, consist of basic kimberlite principally. Although the diamondiferous kimberlites and lamproites occur always in the cratons within continental plate, both the potassium-rich ultramafic rocks display the geochemical features of the magmatism of post-collision in orogenic belt. Both the kimberlite and lamproite magmas may originate from the local parts of the mantle transition zone, where the mantle contains the matter of ancestor slab of ancient subduction zone. And, both the K-rich ultramafic magmas generated in an active mantle plume, which came from the boundary between the core and the lower mantle. The basic kimberlite magma may be more capable of preserving the crystals of the diamond type 11.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号