共查询到20条相似文献，搜索用时 31 毫秒
1.
地震波初至走时的识别在地震勘探、人工地震层析成像以及全球地震层析成像方法研究中起重要作用．初至走时拾取的精度在很大的程度上影响地震层析成像及演的精度．本研究以提高地震波初至走时拾取的精度及定量化程度为目标,利用计算地震道时间序列分数维的方法,实现了地震波初至走时的自动拾取．本文以分形理论为基础,进行了地震道时间序列Hausdorff分数维的计算．计算结果表明地震道时间序列的分数维在初至到达前后具有不同的数值,其变化点能够定量指示出初至走时的位置．本文还给出了利用该方法对实测数据进行初至走时拾取的实例． 相似文献
2.
研究了华东地区１５个地震序列的振幅比、初动方向和初动半周期资料。得到：大震（主余型序列中的主震或震群型序列中最大地震）前后的Ｐ波初动方向，除人们熟知的由优势分布转化为紊乱外，还有可能呈优势分布，优势方向改变的特征。余震序列的Ｐ波初动方向和振幅比特征可能有助于预测强余震。初动半周期特征可能用于区别的前震和余震。 相似文献
3.
Emil Blias 《Geophysical Prospecting》2012,60(6):1024-1029
A new, adaptive multi‐criteria method for accurate estimation of three‐component three‐dimensional vertical seismic profiling of first breaks is proposed. Initially, we manually pick first breaks for the first gather of the three‐dimensional borehole set and adjust several coefficients to approximate the first breaks wave‐shape parameters. We then predict the first breaks for the next source point using the previous one, assuming the same average velocity. We follow this by calculating an objective function for a moving trace window to minimize it with respect to time shift and slope. This function combines four main properties that characterize first breaks on three‐component borehole data: linear polarization, signal/noise ratio, similarity in wave shapes for close shots and their stability in the time interval after the first break. We then adjust the coefficients by combining current and previous values. This approach uses adaptive parameters to follow smooth wave‐shape changes. Finally, we average the first breaks after they are determined in the overlapping windows. The method utilizes three components to calculate the objective function for the direct compressional wave projection. An adaptive multi‐criteria optimization approach with multi three‐component traces makes this method very robust, even for data contaminated with high noise. An example using actual data demonstrates the stability of this method. 相似文献
4.
2021年2月13日日本福岛县近海发生Mj7.3级地震,触发了日本气象厅地震预警系统,系统在首台触发后5.6s发出震级为Mj6.3级的预警第1报,首台触发后10s对公众发布警报、预警震级为Mj6.4级。基于多类型特征参数输入的机器学习支持向量机震级估算模型（SVM-M）,利用2021年2月13日日本福岛县近海Mj7.3级地震获取的日本K-net强震动观测数据,分析SVM-M模型在该次地震中首台触发初期（首台触发后1~10s）的震级估算效能。结果表明:SVM-M震级估算模型,在首台触发后1s即可给出Mj6.3级的震级估算结果,与日本气象厅在首台触发后5.6s发布的预警第1报震级相同;随着时间窗的增加,首台触发后5s和10s,SVM-M模型的震级估算结果分别是Mj6.7级和Mj6.6级,均大于日本气象厅首台触发后10s对公众发布警报的预警震级。该次地震的离线模拟结果表明:SVM-M模型可在地震发生初期有效提高地震预警震级确定的准确性和时效性。 相似文献
5.
L. Jones 《Stochastic Environmental Research and Risk Assessment (SERRA)》1989,3(3):179-190
The expected head and standard deviation of the head from the first order Taylor series approximation is compared to Monte Carlo simulation, for steady flow in a confined aquifer with transmissivity as a random variable. Emphasis is on the effect of changes in the covariance structure of the transmissivity, and pumping rates, on the errors in the first order Taylor series approximation. The accuracy of the first order Taylor series approximation is found to be particularly sensitive to pumping rates. With significant pumping the approximation is found to under estimate both the expected drawdown and head variance, and the error increases as the pumping rate increases. This can lead to large errors in probability constraints based on moments from the first order Taylor series approximation. 相似文献
6.
The dynamic, bi-linear response behaviour of a series of eight storey shear buildings subjected to simulated earthquake excitation is studied. The specific objective of the investigation is to determine under what conditions a yielding first storey can adequately protect the upper storeys from significant yielding. Two classes of buildings are considered: stiff (0.5 sec period) and flexible (2.0 sec period), and the basic parameters considered in the yielding first storey are the yield force level and the bi-linear stiffness. The results demonstrate that a very low yield force level and an essentially perfectly plastic yielding mechanism are required in the first storey to provide effective protection to the superstructure. Moreover, the required displacement capacity of such an effective first storey mechanism is found to be very large. 相似文献
7.
Second‐mode tuned mass dampers in base‐isolated structures for reduction of floor acceleration 
下载免费PDF全文
下载免费PDF全文 To reduce floor acceleration of base‐isolated structures under earthquakes, a tuned mass damper (TMD) system installed on the roof is studied. The optimal tuning parameters of the TMD are analyzed for linear base isolation under a generalized ground motion, and the performance of the TMD is validated using a suite of recorded ground motions. The simulation shows that a TMD tuned to the second mode of a base‐isolated structure reduces roof acceleration more effectively than a TMD tuned to the first mode. The reduction ratio, defined as the maximum roof acceleration with the TMD relative to that without the TMD, is approximately 0.9 with the second‐mode TMD. The higher effectiveness of the second‐mode TMD relative to the first‐mode TMD is attributed primarily to the unique characteristics of base isolation, ie, the relatively long first‐mode period and high base damping. The modal acceleration of the second mode is close to or even higher than that of the first mode in base‐isolated structures. The larger TMD mass ratio and lower modal damping ratio of the second‐mode TMD compared to the first‐mode TMD increases its effect on modal acceleration reduction. The reduction ratio with the second‐mode TMD improves to 0.8 for bilinear base isolation. Because of the detuning effect caused by the change in the first‐mode period in bilinear isolation, the first‐mode TMD is ineffective in reducing roof acceleration. Additionally, the displacement experienced by the second‐mode TMD is considerably smaller than that of the first‐mode TMD, thereby reducing the installation space for the TMD. 相似文献
8.
在Newmark精细直接积分法的基础上,应用高斯积分与精细指数运算,提出该方法的两种逐步积分格式。文中对两种积分格式的稳定性和精度进行了分析。经过分析比较,第1种逐步积分格式计算精度较高,其稳定性明显地满足算法稳定性分析的条件;而第2种积分格式计算精度相对较差,且是不稳定的。因此本文将第1种积分格式应用于结构的地震反应分析中。算例表明,该逐步积分格式对地震作用有很好的适应性。 相似文献
9.
推导了模态参数对于损伤构件的一阶和二阶灵敏度矩阵,并对在推导一阶和二阶振型灵敏度的过程中产生的模态截尾误差进行了改进。根据泰勒级数展开的原理分别建立了一阶和二阶的灵敏度方程。考虑到一阶灵敏度方程求解速度快和二阶灵敏度方程求解精度高的特点,本文提出了一种用于结构损伤识别的混合迭代算法,该算法用二阶非线性的解析解作为算法的第一次迭代值,用一阶灵敏度方程的求解值对该算法的第一次迭代值进行关于泰勒级数截尾误差的修正。研究表明,本文提出的混合迭代算法由于采用了精确度较高的二阶非线性解析解作为迭代修正的初值,因此,迭代修正精度更高,收敛性更好。 相似文献
10.
为提高初至拾取方法的准确性和自适应能力,将变异系数加权K均值聚类算法引入初至拾取中。首先提取均方根振幅、相邻道相关性、线积分、振幅谱主频等多种地震属性;然后针对地震属性进行加权K均值聚类,自动识别初至所在时窗;最后结合相位校正法,实现时窗内初至波起跳时间的拾取。在此基础上通过实际数据测试,并与长短时窗能量比法、反向传播神经网络方法对比,验证了本文方法的有效性与可行性。结果表明,基于加权K均值聚类的多属性初至拾取方法能较快速、准确地拾取低信噪比数据的初至,并且无需人为判断时窗,从而提高了拾取的自适应能力。 相似文献
11.
A history of British seismology 总被引：1，自引：1，他引：0
R. M. W. Musson 《Bulletin of Earthquake Engineering》2013,11(3):715-861
The work of John Milne, the centenary of whose death is marked in 2013, has had a large impact in the development in global seismology. On his return from Japan to England in 1895, he established for the first time a global earthquake recording network, centred on his observatory at Shide, Isle of Wight. His composite bulletins, the “Shide Circulars” developed, in the twentieth century, into the world earthquake bulletins of the International Seismological Summary and eventually the International Seismological Centre, which continues to publish the definitive earthquake parameters of world earthquakes on a monthly basis. In fact, seismology has a long tradition in Britain, stretching back to early investigations by members of the Royal Society after 1660. Investigations in Scotland in the early 1840s led to a number of firsts, including the first network of instruments, the first seismic bulletin, and indeed, the first use of the word “seismometer”, from which words like “seismology” are a back-formation. This paper will present a chronological survey of the development of seismology in the British Isles, from the first written observations of local earthquakes in the seventh century, and the first theoretical writing on earthquakes in the twelfth century, up to the monitoring of earthquakes in Britain in the present day. 相似文献
12.
基于BP神经网络的空间索杆结构承重索损伤识别研究 总被引：1，自引：1，他引：0
针对某实际空间索杆结构的承重索预应力松弛现象,采用BP神经网络与基于振动的损伤识别方法,分别对单榀承重索和双榀承重索的预应力松弛进行了识别研究。研究表明,虽然空间索杆结构的动力性能较为复杂,但归一化后的结构前10阶固有频率变化比和归一化后的对应结构第一阶模态的部分节点的损伤信号指标对承重索的损伤位置较为敏感,利用其进行损伤定位是可行的。在此基础上,再增加考虑结构的第一阶同有频率平方变化比即可进一步有效识别出承重索的损伤程度。 相似文献
13.
Yinpo Xu Cheng Yin Xuefeng Zou Yudong Ni Yingjie Pan Liangjun Xu 《Geophysical Prospecting》2020,68(4):1228-1252
As the application of high-density high-efficiency acquisition technology becomes more and more wide, the areas with complex surface conditions gradually become target exploration areas, and the first-break picking work of massive low signal-to-noise ratio data is a big challenge. The traditional method spends a lot of manpower and time to interactively pick first breaks, a large amount of interactive work affects the accuracy and efficiency of picking. In order to overcome the shortcoming that traditional methods have weak anti-noise to low signal-to-noise ratio primary wave, this paper proposes a high accurate automated first-break picking method for low signal-to-noise ratio primary wave from high-density acquisition in areas with a complex surface. Firstly, this method determines first-break time window using multi-azimuth spatial interpolation technology; then it uses the improved clustering algorithm to initially pick first breaks and then perform multi-angle comprehensive quality evaluation to first breaks according to the following sequence: ‘single trace → spread → single shot → multiple shots’ to identify the abnormal first breaks; finally it determines the optimal path through the constructed evaluation function and using the ant colony algorithm to correct abnormal first breaks. Multi-azimuth time window spatial interpolation technology provides the base for accurately picking first-break time; the clustering algorithm can effectively improve the picking accuracy rate of low signal-to-noise ratio primary waves; the multi-angle comprehensive quality evaluation can accurately and effectively eliminate abnormal first breaks; the ant colony algorithm can effectively improve the correction quality of low signal-to-noise ratio abnormal first breaks. By example analysis and comparing with the commonly used Akaike Information Criterion method, the automated first-break picking theory and technology studied in this paper has high picking accuracy and the ability to stably process low signal-to-noise ratio seismic data, has a significant effect on seismic records from high-density acquisition in areas with a complex surface and can meet the requirements of accuracy and efficiency for massive data near-surface modelling and statics calculation. 相似文献
14.
Brian A. Ebel Benjamin B. Mirus Christopher S. Heppner Joel E. VanderKwaak Keith Loague 《水文研究》2009,23(13):1949-1959
Distributed hydrologic models capable of simulating fully‐coupled surface water and groundwater flow are increasingly used to examine problems in the hydrologic sciences. Several techniques are currently available to couple the surface and subsurface; the two most frequently employed approaches are first‐order exchange coefficients (a.k.a., the surface conductance method) and enforced continuity of pressure and flux at the surface‐subsurface boundary condition. The effort reported here examines the parameter sensitivity of simulated hydrologic response for the first‐order exchange coefficients at a well‐characterized field site using the fully coupled Integrated Hydrology Model (InHM). This investigation demonstrates that the first‐order exchange coefficients can be selected such that the simulated hydrologic response is insensitive to the parameter choice, while simulation time is considerably reduced. Alternatively, the ability to choose a first‐order exchange coefficient that intentionally decouples the surface and subsurface facilitates concept‐development simulations to examine real‐world situations where the surface‐subsurface exchange is impaired. While the parameters comprising the first‐order exchange coefficient cannot be directly estimated or measured, the insensitivity of the simulated flow system to these parameters (when chosen appropriately) combined with the ability to mimic actual physical processes suggests that the first‐order exchange coefficient approach can be consistent with a physics‐based framework. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
15.
用应变模态技术诊断梁结构的损伤 总被引：12，自引：0，他引：12
重点研究损伤对应变模态影响规律及其灵敏程度.根据计算结果,损伤处附近发生突变,损伤30%时突变区为梁长的12.5%.应变模态对非节点损伤非常敏感,应变模态也有明显改变,尤其是跨中损伤第1阶、四分之一跨损伤第3和第2阶.跨中损伤时,1阶应变模态除突变区外大多数应变几乎呈均匀下降趋势.四分之一跨损伤30%时,3阶应变模态第1峰值区及2阶模态第1、第2峰值区应变振型值下降至58.6%、71.9%及84.2%.所以,可利用应变模态的敏感性确定损伤位置和程度. 相似文献
16.
17.
Temporal and spatial rupture process of the great Kunlun Mountain Pass earthquake of November 14, 2001 from the GDSN long period waveform data 总被引：7，自引：0，他引：7
XU Lisheng & CHEN Yuntai Institute of Geophysics China Seismological Bureau Beijing China 《中国科学D辑(英文版)》2005,48(1):112-122
The temporal and spatial rupture process of the 14 November 2001 Kunlun Mountain Pass earthquake (KMPE) is obtained by inverting the high signal-to-noise-ratio P-waveform data of vertical components of 20 stations with epicentral distances less than 90°, which are of Global Digital Seismogragh Network (GDSN). The inverted results indicate that the KMPE consists of 3 sub-events. The rupture of the first sub-event initiated at the instrumental epicenter (35.97°N, 90.59°E) and then propagated both westwards and eastwards, extending 140 km westwards at the speed of 4.0 km/s and 80 km eastwards at the speed of 2.2 km/s, which appeared to be an asymmetrical bilateral rupture dominantly from east to west. This sub-event formed a 220-km-long fault. Fifty-two seconds after initiation of the first sub-event, at which time the first sub-event was not over but in its healing phase, the rupture of the second sub-event initiated 220 km west of the epicenter and propagated both westwards and eastwards, extending 50 相似文献
18.
在长江三角洲、钱塘江及东海陆架广大地区的晚第四纪地层中发育若干层厚度不等的暗绿色、黄褐色的硬质黏土层,简称硬土层。最上面的硬土层称“第一硬土层”,第一硬土层之上为海相地层。第一硬土层一直被认为是全新统的基底而被作为划分全新统与更新统的重要标志层。文中对采自宁波地区第一硬土层及上覆海相层和下伏地层中的19个样品进行了光释光测年和14C测年,结果表明,第一硬土层的母体形成于45~55ka BP,它并非连续分布,局部被后期海侵剥蚀而未保留,与上覆海侵层是突变关系。在宁波地区,全新世的底界不能简单地划在第一硬土层和海相层之间,海侵可能早在晚更新世末期就开始发生了 相似文献
19.
张永荣 《地震地磁观测与研究》1992,13(1):24-30
核爆炸与地震相比,围绕爆炸源的初动具有更多的向上记录和更高的振幅周期比,初动可以作为核爆与地震的一个识别标志。某些核爆炸的向下记录。或许是由于低信噪比的原因,记录到的是初至波的第二个半周;其余的也许是由于近P波走时曲线的反射波造成。 相似文献
20.
The complex‐valued first‐arrival traveltime can be used to describe the properties of both velocity and attenuation as seismic waves propagate in attenuative elastic media. The real part of the complex‐valued traveltime corresponds to phase arrival and the imaginary part is associated with the amplitude decay due to energy absorption. The eikonal equation for attenuative vertical transversely isotropic media discretized with rectangular grids has been proven effective and precise to calculate the complex‐valued traveltime, but less accurate and efficient for irregular models. By using the perturbation method, the complex‐valued eikonal equation can be decomposed into two real‐valued equations, namely the zeroth‐ and first‐order traveltime governing equations. Here, we first present the topography‐dependent zeroth‐ and first‐order governing equations for attenuative VTI media, which are obtained by using the coordinate transformation from the Cartesian coordinates to the curvilinear coordinates. Then, we apply the Lax–Friedrichs sweeping method for solving the topography‐dependent traveltime governing equations in order to approximate the viscosity solutions, namely the real and imaginary parts of the complex‐valued traveltime. Several numerical tests demonstrate that the proposed scheme is efficient and accurate in calculating the complex‐valued P‐wave first‐arrival traveltime in attenuative VTI media with an irregular surface. 相似文献