首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A double-pulse laser drive is used to create episodic supersonic plasma jets that propagate into a low density ambient medium. These are among the first laser experiments to generate pulsed outflow. The temporal laser-intensity profile consists of two 1-ns square pulses separated by 9.6 ns. The laser is focused on a truncated conical plug made of medium Z material inserted into a high-Z washer. Unloading material from the plug is collimated within the cylindrical washer hole, then propagates into the low-Z foam medium. The resulting jet is denser than the ambient medium. Double-pulse jet evolution is compared to that driven by a single laser pulse. The total drive energy is the same for both jets, as if a source with fixed energy generated a jet from either one or two bursts. Radiographs taken at 100 ns show that a single-pulse jet was broader than the double-pulse jet, as predicted by hydrodynamic simulations. Since the initial shock creating the jet is stronger when all the energy arrives in a single pulse, the jet material impacts the ambient medium with higher initial velocity. Detailed comparisons between single- and double-pulsed jet rheology and shock structure are presented. 2-D hydrodynamic simulations are compared to the experimental radiographs. PACS: 52.30.−q 41.75.Jv 42.62.−b 42.68.Sq 47.40.−x 47.56.+r  相似文献   

2.
After briefly reviewing observations of molecular outflows from young stars, we discuss current ideas as to how they might be accelerated. Broadly speaking it is thought that such outflows represented either deflected accreted gas, or ambient material that has been pushed by a poorly collimated wind or accelerated by a highly collimated jet. Observations tend to favour the latter model, with jets being the clear favourite at least for the youngest flows. Jets from young stars may accelerate ambient gas either through the development of a boundary layer, where ambient and jet material are turbulently mixed, or at the working surface of the jet, i.e. the bow shock, via the prompt entrainment mechanism. Recently, we (Downes and Ray, 1999) have investigated, through simulations, the efficiency of prompt entrainment in jets from young stars as a means of accelerating ambient molecular gas without causing dissociation. Prompt entrainment was found to be very poor at transferring momentum from the jet to its surroundings in both the case of ``heavy' (not surprizingly) but also ``equi-density' (with respect to the ambient environment) jets. Moreover the transfer efficiency decreases with increasing density as the bow shock takes on a more aerodynamic shape. Models, however, in which jets are the ultimate prime movers, do have the advantage that they can reproduce several observational features of molecular outflows. In particular a power law relationship for mass versus velocity, similar to what is observed, is predicted by the simulations and the so-called ``Hubble Law' for molecular outflows is naturally explained. Pulsing of the jet, i.e. varying its velocity, is found to have little effect on the momentum transfer efficiency at least for the dynamically young jets we have studied. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

3.
Observations of supersonic jet propagation in low-current x-pinches are reported. X-pinches comprising of four 7.5 ??m diameter tungsten wires were driven by an 80 kA, 50 ns current pulse from a compact pulser. Coronal plasma surrounding the wire cores was accelerated perpendicular to their surface due to the global J×B force, and traveled toward the axis of the x-pinch to form an axially propagating jet. These jets moved towards the electrodes and, late in time (??150 ns), were observed to propagate well above the anode with a velocity of 3.3±0.6×104 m/s. Tungsten jets remained collimated at distances of up to 16 mm from the cross point, and an estimate of the local sound speed gives a Mach number of ??6. This is the first demonstration that supersonic plasma jets can be produced using x-pinches with such a small, low current pulser. Experimental data compares well to three-dimensional simulations using the GORGON resistive MHD code, and possible scaling to astrophysical jets is discussed.  相似文献   

4.
We investigate the launching of outflows from the disc–magnetosphere boundary of slowly and rapidly rotating magnetized stars using axisymmetric and exploratory 3D magnetohydrodynamic simulations. We find long-lasting outflows in the following cases. (1) In the case of slowly rotating stars , a new type of outflow, a conical wind , is found and studied in simulations. The conical winds appear in cases where the magnetic flux of the star is bunched up by the disc into an X-type configuration. The winds have the shape of a thin conical shell with a half-opening angle  θ∼ 30°–40°  . About 10–30 per cent of the disc matter flows from the inner disc into the conical winds. The conical winds may be responsible for episodic as well as long-lasting outflows in different types of stars. There is also a low-density, higher velocity component (a jet) in the region inside the conical wind. (2) In the case of rapidly rotating stars (the 'propeller regime'), a two-component outflow is observed. One component is similar to the conical winds. A significant fraction of the disc matter may be ejected into the winds. The second component is a high-velocity, low-density magnetically dominated axial jet where matter flows along the opened polar field lines of the star. The jet has a mass flux of about 10 per cent of that of the conical wind, but its energy flux (dominantly magnetic) can be larger than the energy flux of the conical wind. The jet's angular momentum flux (also dominantly magnetic) causes the star to spin down rapidly. Propeller-driven outflows may be responsible for the jets in protostars and for their rapid spin-down. The jet is collimated by the magnetic force while the conical winds are only weakly collimated in the simulation region. Exploratory 3D simulations show that conical winds are axisymmetric about the rotational axis (of the star and the disc), even when the dipole field of the star is significantly misaligned.  相似文献   

5.
The large-scale flow produced by classical and relativistic jets in a uniform external medium is explored using a combination of general arguments and numerical simulations. We find that in both cases, jets with finite initial opening angles are recollimated by the high pressure in the cocoon and that the outer flow becomes approximately self-similar at large times. However, if the opening angle is significantly less than 20°, then there is an intermediate stage during which the working surface propagates at a constant speed, which is of the same order as that in the jet. The behaviour of the relativistic and classical jets is very similar, except that the relativistic jets generate lighter cocoons. Application of the model to Cygnus A gives estimates of the source age and advance speed which agree very well with spectral ageing observations. Quantitative estimates and general arguments suggest that the regularly spaced knots in the Cygnus A jet can be interpreted as shocks associated with reconfinement of an initially free jet, knot 3 of the Cygnus A jet being identified with the reflection point of the reconfinement shock. However, the model predicts too large an initial opening angle for the Cygnus A jets. It is possible that this discrepancy is due to our imposition of axisymmetry which allows the numerical jets to become much better collimated after the reconfinement than they would be in the three-dimensional case. Further study is needed to test this idea.  相似文献   

6.
Jets and outflows are thought to be an integral part of accretion phenomena and are associated with a large variety of objects. In these systems, the interaction of magnetic fields with an accretion disk and/or a magnetized central object is thought to be responsible for the acceleration and collimation of plasma into jets and wider angle flows. In this paper we present three-dimensional MHD simulations of magnetically driven, radiatively cooled laboratory jets that are produced on the MAGPIE experimental facility. The general outflow structure comprises an expanding magnetic cavity which is collimated by the pressure of an extended plasma background medium, and a magnetically confined jet which develops within the magnetic cavity. Although this structure is intrinsically transient and instabilities in the jet and disruption of the magnetic cavity ultimately lead to its break-up, a well collimated, “knotty” jet still emerges from the system; such clumpy morphology is reminiscent of that observed in many astrophysical jets. The possible introduction in the experiments of angular momentum and axial magnetic field will also be discussed.  相似文献   

7.
We present diagrams depicting the expected inter-dependences of two key kinematical parameters of radio knots in the parsec-scale jets of blazars, deduced from VLBI observations. The two parameters are the apparent speed (υ app = cβ app) and the effective Doppler boosting factor (δ eff) of the relativistically moving radio knot. A novel aspect of these analytical computations of β-δ diagrams is that they are made for parsec-scale jets having a conical shape, with modest opening angles (ω up to 10°), in accord with the VLBI observations of the nuclei of the nearest radio galaxies. Another motivating factor is the recent finding that consideration of a conical geometry can have important implications for the interpretation of a variety of radio observations of blazar jets. In addition to uniform jet flows (i.e., those having a uniform bulk Lorentz factor, Γ), computational results are also presented for stratified jets where an ultra-relativistic central spine along the jet axis is surrounded by a slower moving sheath, possibly arising from a velocity shear.  相似文献   

8.
The multi-wavelength quasi-simultaneous data of 55 Fermi blazars are fitted by using the conical jet model, and the physical properties of blazar jets are also investigated. Through the X2-minimization fitting procedure, the best-fit parameters of the conical jet model are obtained. Combined with the other parameters we collected, a statistical analysis is performed. The results of statistical analysis are summarized as follows: (1) The jet power obtained by the spectral energy distribution (SED) fitting is larger than the jet power calculated by using the extended radio luminosity; (2) There is no correlation between the Doppler factor 5 and the magnetic field strength B; (3) There is a correlation between the jet power and the accretion disk luminosity, and the Blandford-Znajek (BZ) mechanism can well explain the energy source of BL Lac jets rather than Flat Spectrum Radio Quasars (FSRQs); (4) The jet power is significantly correlated with the black hole mass.  相似文献   

9.
It is widely accepted that many gamma-ray bursts (GRBs) are produced by relativistic jets. Previous studies on the beaming effects in GRBs are mainly based on the conical geometry. However, some observations of the relativistic jets in radio galaxies, active galactic nuclei, and “micro-quasars” have shown that many of these outflows are cylindrical, but not conical. In this study, we assume that the jets that produce GRBs are cylindrical, and that the circum-burst environment is dense and optically thick. In the prompt burst phase, the strong X-ray emission can sublimate the circum-burst medium to form an optically thin channel, from which the optical photons are allowed to escape. As a result, the optical afterglows can be observed only for the observers who are positioned on the axes of jets. It is shown that the observed optical afterglows usually decay very rapidly (in the form of Sv oc t^v^l1 where p is the index of electron power-law distribution), due to the joint effect of the lateral expansion of the cylindrical jet and the absorption of optical photons by the dust outside the channel. Our model provides a possible explanation for the dark gamma-ray bursts.  相似文献   

10.
The interaction of supersonic plasma jets with dense gases and plasmas has been studied experimentally and theoretically. Collimated plasma jets were generated from the laser pulse interaction with solid targets. The jet propagates with the velocity exceeding 400 km/s and transports the energy of a few kJ/cm2. The interaction of such a jet with an Ar and He gases at various pressures has been studied by using optical and X-ray diagnostics. Qualitative estimates and numerical simulations with a radiative hydrodynamic code explain a sequence of physical processes during the interaction. Experimental and numerical results show that, by changing ambient material, the working surface structure changes from an adiabatic outflow to a radiative cooling jet. The applications of this phenomenon to astrophysical conditions and the inertial confinement fusion are discussed.  相似文献   

11.
The acceleration mechanisms of relativistic jets are of great importance for understanding various astrophysical phenomena such as gamma-ray bursts,active galactic nuclei and microquasars.One of the most popular scenarios is that the jets are initially Poynting-flux dominated and succumb to magnetohydrodynamic instability leading to magnetic reconnections.We suggest that the reconnection timescale and efficiency could strongly depend on the geometry of the jet,which determines the length scale on which the orientations of the field lines change.In contrast to a usuallyassumed conical jet,the acceleration of a collimated jet can be found to be more rapid and efficient(i.e.a much more highly saturated Lorentz factor can be reached)while the jets with lateral expansion show the opposite behavior.The shape of the jet could be formed due to the lateral squeezing on the jet by the stellar envelope of a collapsing massive star or the interaction of the jet with stellar winds.  相似文献   

12.
The aim of this work is to model the jets produced by conical wire arrays on the MAGPIE generator, and to design and test new setups to strengthen the link between laboratory and astrophysical jets. We performed the modelling with direct three-dimensional magneto-hydro-dynamic numerical simulations using the code GORGON. We applied our code to the typical MAGPIE setup and we successfully reproduced the experiments. We found that a minimum resolution of ∼100 μm is required to retrieve the unstable character of the jet. We investigated the effect of changing the number of wires and found that arrays with less wires produce more unstable jets, and that this effect has magnetic origin. Finally, we studied the behaviour of the conical array together with a conical shield on top of it to reduce the presence of unwanted low density plasma flows. The resulting jet is shorter and less dense.  相似文献   

13.
In recent years, we have carried out experiments at the University of Rochester’s Omega laser in which supersonic, dense-plasma jets are formed by the interaction of strong shocks in a complex target assembly (Foster et al., Phys. Plasmas 9 (2002) 2251). We describe recent, significant extensions to this work, in which we consider scaling of the experiment, the transition to turbulence, and astrophysical analogues. In new work at the Omega laser, we are developing an experiment in which a jet is formed by laser ablation of a titanium foil mounted over a titanium washer with a central, cylindrical hole. Some of the resulting shocked titanium expands, cools, and accelerates through the vacuum region (the hole in the washer) and then enters a cylinder of low-density foam as a jet. We discuss the design of this new experiment and present preliminary experimental data and results of simulations using AWE hydrocodes. In each case, the high Reynolds number of the jet suggests that turbulence should develop, although this behaviour cannot be reliably modelled by present, resolution-limited simulations (because of their low-numerical Reynolds number).  相似文献   

14.
Alexander  David  Fletcher  Lyndsay 《Solar physics》1999,190(1-2):167-184
We present recent observations of coronal jets, made by TRACE and Yohkoh/SXT on 28 May and 19 August 1998. The high spatial resolution of TRACE enables us to see in detail the process of material ejection; in the line of Fe ix (one million degrees) we see both bright emitting material and dark absorbing/scattering material being ejected, i.e., both hot and cold material, highly collimated and apparently ejected along the direction of the overlying field lines. Bright ejecta are seen simultaneously in Lyman α for one event and Yohkoh/SXT in the other. The jets on the two days are different in that the 19 August jet displays the morphology typical of a one-sided anemone jet while the 28 May jet exhibits a two-sided jet morphology. The 19 August jet shows evidence for rotation and an interesting bifurcation at large distances from the energy release site. We study the physical properties and energetics of these jetting events, and conclude that existing theoretical models capture the essential physics of the jet phenomena. Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1005213826793  相似文献   

15.
Under suitable conditions on laser intensity, focal spot radius and atomic number a radiative jet was launched from a planar target. This jet was produced using a relatively low energy laser pulse, below 500 J and it presents similarities with astrophysical protostellar jets. It lasts more than 10 ns, extends over several millimeters, has velocity more than 500 km/s, the Mach number more than 10 and the density above 1018 cm−3. The mechanism of jet formation was inferred from the dimensional analysis and hydrodynamic two-dimensional simulations. It is related to the radiative cooling while the magnetic fields play a minor role. PACS numbers: 98.38.Fs, 52.50.Jm, 95.30.Qd  相似文献   

16.
Most stars produce spectacular jets during their formation. There are thousands of young stars within 500 pc of the Sun and many power jets. Thus protostellar jets may be the most common type of collimated astrophysical outflow. Shocks powered by outflows excite many emission lines, exhibit a rich variety of structure, and motions with velocities ranging from 50 to over 500 km s−1. Due to their relative proximity, proper motions and structural changes can be observed in less than a year. I review the general properties of protostellar jets, summarize some results from recent narrow-band imaging surveys of entire clouds, discuss irradiated jets, and end with some comments concerning outflows from high-mass young stellar objects. Protostellar outflows are ideal laboratories for the exploration of the jet physics.  相似文献   

17.
Jet physics is again flourishing as a result of Chandra’s ability to resolve high-energy emission from the radio-emitting structures of active galaxies and separate it from the X-ray-emitting thermal environments of the jets. These enhanced capabilities have coincided with an increasing interest in the link between the growth of super-massive black holes and galaxies, and an appreciation of the likely importance of jets in feedback processes. I review the progress that has been made using Chandra and XMM-Newton observations of jets and the medium in which they propagate, addressing several important questions, including: Are the radio structures in a state of minimum energy? Do powerful large-scale jets have fast spinal speeds? What keeps jets collimated? Where and how does particle acceleration occur? What is jet plasma made of? What does X-ray emission tell us about the dynamics and energetics of radio plasma/gas interactions? Is a jet’s fate determined by the central engine?  相似文献   

18.
Young stars produce both molecular outflows and, at a later evolutionary stage, well-collimated optical jets. The simplest explanation is that the molecular outflows are driven byobscured optical jets, rather than directly, by a disk wind for example, but the optical jets appear to have too small a momentum flux. Recent statistical studies however show that the molecular flows must be quasi-stationary, which means that the dynamical lifetime is a gross underestimate of the true age. As a consequence much less thrust is required. We present recent observations of RNO 43, which has well-defined optical and molecular outflows lying close to the plane of the sky. Excellent agreement with the observations is obtained with a simple kinematic model for the molecular material, which supposes that it lies in a parabolic shell around the optical jet with the highest velocities at the working surface. Together with our modelling of the NGC2024 outflow, this is very strong evidence that molecular outflows are produced by prompt entrainment of molecular material in a neutral or weakly-ionized jet.  相似文献   

19.
Plasma jets were produced using a high repetition rate laser by laser-ablation of coatings on the surface of conical impressions machined into solid blocks of an aluminium alloy. The ablating plasmas emerged into background gases generating shock waves. The jet-shock system was diagnosed using interferometry. The use of a high repetition rate laser allowed examination of a large number of combinations of jet materials, background gases and gas pressures.  相似文献   

20.
Supersonic plasma jets are ubiquitous in astrophysics. Our study focus on the jets emanated from Herbig-Haro (HH) objects. They have velocities of a few hundred km/s and are extending over the distances more than a parsec. Interaction of the jets with surrounding matter produces two specific structures in the jet head: the bow shock and the Mach disk. The radiative cooling of these shocks affects strongly the jet dynamics. A tool to understand the physics of these jets is the laboratory experiment. A supersonic jet interaction with surrounding plasma was studied on the PALS laser facility. A collimated high-Z plasma jet with a velocity exceeding 400 km/s was generated and propagated over a few millimeters length. Here we report on study the effect of radiative cooling on the head jet structure with a 2D radiative hydrodynamic code. The simulation results demonstrated the scalability of the experimental observations to the HH jets.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号