共查询到20条相似文献，搜索用时 46 毫秒
1.
Gold mineralization at Hutti is confined to a series of nine parallel, N–S to NNW–SSE trending, steeply dipping shear zones.
The host rocks are amphibolites and meta-rhyolites metamorphosed at peak conditions of 660±40°C and 4±1 kbar. They are weakly
foliated (S1) and contain barren quartz extension veins. The auriferous shear zones (reefs) are typically characterized by four alteration
assemblages and laminated quartz veins, which, in places, occupy the entire reef width of 2–10 m, and contain the bulk of
gold mineralization. A <1.5 m wide distal chlorite-sericite (+biotite, calcite, plagioclase) alteration zone can be distinguished
from a 3–5 m wide proximal biotite-plagioclase (+quartz, muscovite, calcite) alteration zone. Gold is both spatially and temporally
associated with disseminated arsenopyrite and pyrite mineralization. An inner chlorite-K-feldspar (+quartz, calcite, scheelite,
tourmaline, sphene, epidote, sericite) alteration halo, which rims the laminated quartz veins, is characterized by a pyrrhotite,
chalcopyrite, sphalerite, ilmenite, rutile, and gold paragenesis. The distal chlorite-sericite and proximal biotite-plagioclase
alteration assemblages are developed in microlithons of the S2–S3 crenulation cleavage and are replaced along S3 by the inner chlorite-K-feldspar alteration, indicating a two-stage evolution for gold mineralization. Ductile D2 shearing, alteration, and gold mineralization formed the reefs during retrograde evolution and fluid infiltration under upper
greenschist to lower amphibolite facies conditions (560±60°C, 2±1 kbar). The reefs were reactivated in the D3 dextral strike-slip to oblique-slip environment by fault-valve behavior at lower greenschist facies conditions (ca. 300–350°C),
which formed the auriferous laminated quartz veins. Later D4 crosscutting veins and D5 faults overprint the gold mineralization. The alteration mineralogy and the structural control of the deposit clearly points
to an orogenic style of gold mineralization, which took place either during isobaric cooling or at different levels of the
Archean crust. From overlaps in the tectono-metamorphic history, it is concluded that gold mineralization occurred during
two tectonic events, affecting the eastern Dharwar craton in south India between ca. 2550 – 2530 Ma: (1) The assemblage of
various terranes of the eastern block, and (2) a tectono-magmatic event, which caused late- to posttectonic plutonism and
a thermal perturbation. It differs, however, from the pre-peak metamorphic gold mineralization at Kolar and the single-stage
mineralization at Ramagiri. Notably, greenschist facies gold mineralization occurred at Hutti 35–90 million years later than
in the western Dharwar craton.
Editorial handling: G. Beaudoin 相似文献
2.
《Ore Geology Reviews》2010,37(4):333-349
Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H2O–CO2–CH4 + salt) fluid that underwent phase separation and gave rise to gaseous (CO2–CH4), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O2), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems. 相似文献
3.
Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H2O–CO2–CH4 + salt) fluid that underwent phase separation and gave rise to gaseous (CO2–CH4), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O2), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems. 相似文献
4.
The Hutti gold mine is located in a high-angle, NNW–SSE-trending shear zone system, which hosts nine discrete auriferous shear zones (reefs). On a clockwise, retrograde PT path two separate stages of deformation/metamorphism (D2/M2 and D3/M3) occurred synchronous with two distinct stages of gold mineralization, both of which were associated with different fluid types. Stage 1 mineralization developed during D2/M2, where the amphibolite host rocks were altered by a metamorphic fluid with a $ {{\delta }^{{18}}}{{O}_{{{{H}_2}O}}} $ of 7.5–10.1?‰, rich in K, S, As, and Au at pressure and temperature conditions of around 3 kbar and 530?+?20/?30°C, respectively. The stage 1 auriferous shear zones are enveloped by a zoned alteration consisting of a distal biotite–chlorite and proximal biotite–plagioclase assemblage. Subsequently, D2/M2 was overprinted by D3/M3 deformation and metamorphism at 300–400°C and <2 kbar that formed the stage 2 mineralization. The stage 2 mineralizing fluid which originated from outside the greenstone belt (δ18Ofluid of 3.2–6.8?‰) was rich in Si, Au, and W. This mineralization stage is distinct by the emplacement of laminated quartz veins central to the shear zone, containing locally visible gold at concentrations of up to 1 kg Au/t. The laminated quartz veins are surrounded by a millimeter-scale chlorite2–K-feldspar alteration halo, which replaced the stage 1 biotite–plagioclase assemblage. The oxygen isotopic composition of the stage 2 fluid suggests a mixture of a magmatic fluid with an oxygen isotopic composition in the range of 6 to 10?‰ and an isotopically light formation fluid that resulted from fluid–rock interaction in the greenstone pile. The two fluid fluxes at stages 1 and 2 both contributed to the overall gold mineralization; however, it was the second fluid pulse, which gave the Hutti mine its status as the largest gold mine in India. The metamorphic evolution was thereby important for the first stage, whereas the second stage was controlled by tectonism and intrusion of the high-heat production Yellagatti granite that re-established the fluid plumbing and mineralizing system. 相似文献
5.
The gold mineralization of the Hutti Mine is hosted by nine parallel, N–S trending, steeply dipping, 2–10 m wide shear zones, that transect Archaean amphibolites. The shear zones were formed after peak metamorphism during retrograde ductile D2 shearing in the lower amphibolite facies. They were reactivated in the lower to mid greenschist facies by brittle–ductile D3 shearing and intense quartz veining. The development of a S2–S3 crenulation cleavage facilitates the discrimination between the two deformation events and contemporaneous alteration and gold mineralization. Ductile D2 shearing is associated with a pervasively developed distal chlorite–sericite alteration assemblage in the outer parts of the shear zones and the proximal biotite–plagioclase alteration in the center of the shear zones. D3 is characterized by development of the inner chlorite-K-feldspar alteration, which forms a centimeter-scale alteration halo surrounding the laminated quartz veins and replaces earlier biotite along S3. The average size of the laminated vein systems is 30–50 m along strike as well as down-dip and 2–6 m in width.Mass balance calculations suggest strong metasomatic changes for the proximal biotite–plagioclase alteration yielding mass and volume increase of ca. 16% and 12%, respectively. The calculated mass and volume changes of the distal chlorite–sericite alteration (ca. 11%, ca. 8%) are lower. The decrease in δ18O values of the whole rock from around 7.5‰ for the host rocks to 6–7‰ for the distal chlorite–sericite and the proximal biotite–plagioclase alteration and around 5‰ for the inner chlorite-K-feldspar alteration suggests hydrothermal alteration during two-stage deformation and fluid flow.The ductile D2 deformation in the lower amphibolite facies has provided grain scale porosities by microfracturing. The pervasive, steady-state fluid flow resulted in a disseminated style of gold–sulfide mineralization and a penetrative alteration of the host rocks. Alternating ductile and brittle D3 deformation during lower to mid greenschist facies conditions followed the fault-valve process. Ductile creep in the shear zones resulted in a low permeability environment leading to fluid pressure build-up. Strongly episodic fluid advection and mass transfer was controlled by repeated seismic fracturing during the formation of laminated quartz(-gold) veins. The limitation of quartz veins to the extent of earlier shear zones indicate the importance of pre-existing anisotropies for fault-valve action and economic gold mineralization. 相似文献
6.
The eastern Dharwar Craton of southern India includes at least three ∼ 2700Ma supracrustal belts (schist belts) which have
mesothermal, quartz-carbonate vein gold mineralization emplaced within the sheared metabasalts. In the Hutti and the Kolar
schist belts, the host rocks are amphibolites and the ore veins have been flanked by only a thin zone of biotitic alteration;
in the Ramagiri belt, however, the host rocks to the veins have been affected by more extensive but lower temperature alteration
by fluids. The rare earth element (REE) geochemistry of the host metabasalts, alteration zones, ore veins and the bulk sulfides
separated from the ore veins and the alteration zones suggest that
Because alteration and mineralization involved addition of REE, more LREE compared to HREE, the fluids could be of higher
temperature origin. The initial Nd isotope ratios in the host rocks (εNd calculated at 2700 Ma) showed a large variation (+8 to -4) and a deep crustal source for the fluid REE seems likely. A crustal
source for Pb and Os in the ore samples of Kolar belt has previously been suggested (Krogstadet al 1995; Walkeret al 1989). Such a source for ore fluids is consistent with a late Archean (2500Ma) accretionary origin for the terrains of the
eastern Dharwar Craton. 相似文献
| – | •the REE chemistry of the immediate host rocks has been modified by fluids which added LREE, |
| – | •the REE abundance of the ore veins vary with the amount of host rock fragments included in the veins, |
| – | •the sulfides formed during mineralization have significant REE concentration with patterns nearly identical to the ore veins and alteration zones and |
| – | •therefore the ore fluids involved in gold mineralization here could be LREE enriched. |
7.
Martin Michálek Marián Putiš Christoph A. Hauzenberger 《Central European Journal of Geosciences》2011,3(2):197-206
This study focuses on metapelites of the Polinik complex in the Kreuzeck Mts. southeast of the Tauern Window, Eastern Alps, where kyanite — staurolite — garnet gneisses host eclogites and high pressure (HP) amphibolites of the Austroalpine basement. The stable mineral assemblage is garnet — staurolite — biotite — kyanite — quartz. Estimated metamorphic conditions from conventional geothermobarometry are 654±30 °C and 0.9±0.08 GPa, and Average P-T values calculated by THERMOCALC, are 665±15 °C at 0.77±0.09 GPa. Formation of the present mineral association in gneisses is related to the exhumation (D2) stage of hosted eclogites/HP amphibolites within a lateral strike-slip zone. 相似文献
8.
Jiří Zachariáš Zdeněk Pertold Marta Pudilová Karel Žák Jaroslava Pertoldová Holly Stein Richard Markey 《Mineralium Deposita》2001,36(6):517-541
A large number of Variscan mesothermal gold deposits are located in the central part of the Bohemian Massif, close to the Central Bohemian Plutonic Complex. The Petrá)kova hora deposit has many features that distinguish it from other deposits in the region and suggest its mineralization is closely related to the late magmatic processes associated with the Petrá)kova hora granodiorite. The gold ores occur as sheeted arrays of quartz veins and veinlets hosted by the small Petrá)kova hora granodiorite stock. Gold is found mainly as free grains of >900 fineness, and is accompanied by abundant pyrrhotite and chalcopyrite, and accessory pyrite, arsenopyrite, loellingite, and molybdenite. Molybdenite from the Petrá)kova hora deposit has been dated by the Re-Os method at 344.4DŽ.8 Ma. Hydrothermal alteration in the Petrá)kova hora deposit exhibits a distinct temporal paragenesis. Selectively pervasive, early K-alteration and silicification are the oldest hydrothermal phases. These were followed by early quartz veins (Q1 to Q4) that contain most of the gold mineralization. Late quartz veins (Q5) and fracture-controlled silicification are gold-poor or barren. Barren calcite veins are the youngest hydrothermal product. Extensive low-temperature, meteoric-water dominated alteration, as is typical of classic porphyry deposits, is absent. However, the lower '18O whole rock values for Petrá)kova hora granodiorite and aplite (+2.4 to +5.1 SMOW) compared to other intrusions in the region reflect either interaction with isotopically light external fluids or magma assimilation of small volumes of hydrothermally altered country rock. The '18O isotopic compositions for quartz, scheelite and hornblende (7.7 to 13.4 SMOW) and the '34S compositions for sulfide minerals (-1 to +3.5 CDT) from early, gold-rich quartz veins indicate formation at high temperatures (590 to 400 °C) from fluids with a magmatic isotopic signature ('18OFLUID of 5.7 to 7.2). Fluids related to late quartz veins (Q5) suggest the presence of a significant component of non-magmatic water ('18OFLUID: +2.5 to +4.0). The '34S values of post-Q5 sulfide minerals (-4.5 to -3.5) reflect at least partial derivation of late-stage sulfur from a source external to the intrusions. Aqueous, aqueous-carbonic and nitrogen-bearing fluid inclusions were identified in hydrothermal and igneous quartz, with the aqueous inclusions being the most common. In hydrothermal vein quartz, the salinity of primary aqueous inclusions falls into ranges 6 to 23 and 33 to 41 equiv. wt% NaCl; in igneous quartz, populations in salinity were observed between 5 to 16, 35 to 40 and 62 to 70 equiv. wt% NaCl. The salt component of these fluids is best, and minimally, approximated by the NaCl-KCl-CaCl2 system. Low- and high-salinity aqueous-carbonic inclusions are accessory in many of the analyzed samples. Three large successive pulses of fluids are recognized. Each pulse begins with a high-salinity (>30 equiv. wt% NaCl) magmatic fluid and evolves toward a lower salinity (~5 equiv. wt% NaCl) fluid. Data suggest that external (meteoric?) water(s) were significant for only the third fluid pulse, which formed the late Q5 quartz veins and the calcite veins. Polyphase fluid inclusions hosted by igneous quartz of the Petrá)kova hora granodiorite indicate minimum trapping conditions of about 3 kbar and 550 °C. The gold-rich Q1 to Q4 veins may have formed along a quasi-isobaric cooling path at 2.5 to 1.5 kbar and 590 to 400 °C. This was followed by uplift, and formation of late Q5 quartz veins (0.5 to 1.5 kbar; ~300 °C) and post-ore calcite veins (<0.5 kbar; 100 to 140 °C). The characteristics of the Petrá)kova hora deposit suggest that it may represent a position intermediate between intrusion-related gold systems (e.g., Fort Knox deposit, Alaska) and gold-rich, copper-poor porphyry deposits (e.g., Maricunga Belt in Chile). As such, the Petrá)kova hora deposit might be an example of the reduced gold sub-type of porphyry deposit. 相似文献
9.
The Marymia gold deposit, comprising two orebodies, Keillor 1 and Keillor 2, is at the northern end of the Plutonic Well greenstone belt in the Marymia Inlier, in the southern Capricorn Orogen, just north of the Yilgarn craton. The Marymia Inlier is a discrete fault-bounded Archean gneiss-granitoid-greenstone domain surrounded by sedimentary basins that were formed and variably metamorphosed and deformed during several Palaeoproterozoic orogenic cycles. The greenstone sequence at Marymia is stratigraphically and geochemically similar to greenstone sequences in the Yilgarn craton, but was subjected to further deformation and metamorphism in the Palaeoproterozoic. Late Archean deformation (D1-D2) was ductile to brittle-ductile in style, whereas Palaeoproterozoic deformation was predominantly brittle. Equilibrium mineral assemblages indicate that peak amphibolite-facies metamorphism (540-575 °C, <3 kb) was overprinted by greenschist-facies metamorphism (300-360 °C). Petrographic textures indicate that prograde metamorphism was coeval with D1-D2, with peak metamorphism early to syn D2. Gold mineralisation at Marymia is hosted in metamorphosed tholeiitic basalts and banded iron formation. On a gross scale, the distribution of gold is controlled by D2 folds and shear zones. Lithological contacts with strong rheological or chemical contrasts provide local controls. Gold-related alteration comprises subtle millimetre- to centimetre-wide zones of silicification with variable amounts of quartz, hornblende, biotite, K-feldspar, plagioclase, calcite/siderite, scheelite, titanite, epidote, sulfide and telluride minerals. Quartz veins are generally narrow and discontinuous with low total volume of quartz. Gold is sited in the wall rock, at vein salvedges or within stringers of wall rock within veins. There are two distinct opaque-mineral assemblages: pyrite-pyrrhotite-chalcopyrite-galena and hessite-petzite-altaite-Bi-telluride-galena. Ore samples are variably enriched in Ag, Te, Pb, W, Cu, S and Fe reflecting heterogeneity of the ore mineralogy. Structural timing and temperature of formation of alteration and ore minerals support deposition of gold during late peak amphibolite-facies metamorphism from neutral to alkaline (pH=5-6), moderately oxidising (log PO2,-21-22) and CO2-bearing (XCO2 Ƹ.2) fluids. The total sulfur content of the fluid is estimated at 1mDS. Lead isotope compositions support derivation of lead from within the local greenstone sequence. Gold lodes were deformed by faults and shear zones in the Palaeoproterozoic, with only limited remobilisation. Subeconomic, carbonate vein- and breccia-hosted base metal mineralisation is locally hosted within Palaeoproterozoic fault zones, which clearly cut gold lodes. Base-metal-related alteration is characterised by intense carbonatisation, chloritisation, and albitisation of the mafic host rocks. Mineral assemblages are consistent with formation at greenschist facies conditions. Lead isotope compositions support crystallisation at ca. 1.7 Ga from lead that is similar in composition to earlier gold-related galena. 相似文献
10.
Porphyry Cu-Mo-Au mineralisation with associated potassic and phyllic alteration, an advanced argillic alteration cap and epithermal quartz-sulphide-gold-anhydrite veins, are telescoped within a vertical interval of 400-800 m on the northeastern margin of the Thames district, New Zealand. The geological setting is Jurassic greywacke basement overlain by Late Miocene andesitic-dacitic rocks that are extensively altered to propylitic and argillic assemblages. The porphyry Cu-Mo-Au mineralisation is hosted in a dacite porphyry stock and surrounding intrusion breccia. Relicts of a core zone of potassic K-feldspar-magnetite-biotite alteration are overprinted by phyllic quartz-sericite-pyrite or intermediate argillic chlorite-sericite alteration assemblages. Some copper occurs in quartz-magnetite-chlorite-pyrite-chalcopyrite veinlets in the core zone, but the bulk of the copper and the molybdenum are associated with the phyllic alteration as disseminated chalcopyrite and as molybdenite-sericite-carbonate veinlets. The advanced argillic cap has a quartz-alunite-dickite core, which is enveloped by an extensive pyrophyllite-diaspore-dickite-kaolinite assemblage that overlaps with the upper part of the phyllic alteration zone. Later quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins occur within and around the margins of the porphyry intrusion, and are associated with widespread illite-carbonate (argillic) alteration. Multiphase fluid inclusions in quartz stockwork veins associated with the potassic alteration trapped a highly saline (50-84 wt% NaCl equiv.) magmatic fluid at high temperatures (450 to >600 °C). These hypersaline brines were probably trapped at a pressure of about 300 bar, corresponding to a depth of 1.2 km under lithostatic conditions. This shallow depth is consistent with textures of the host dacite porphyry and reconstruction of the volcanic stratigraphy. Liquid-rich fluid inclusions in the quartz stockwork veins and quartz phenocrysts trapped a lower salinity (3-20 wt% NaCl equiv.), moderate temperature (300-400 °C) fluid that may have caused the phyllic alteration. Fluid inclusions in the quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins trapped dilute (1-3 wt% NaCl equiv.) fluids at 250 to 320 °C, at a minimum depth of 1.0 km under hydrostatic conditions. Oxygen isotopic compositions of the fluids that deposited the quartz stockwork veins fall within the 6 to 10 range of magmatic waters, whereas the quartz-sulphide-gold-anhydrite veins have lower '18Owater values (-0.6 to 0.5), reflecting a local meteoric water (-6) influence. A '18O versus 'D plot shows a trend from magmatic water in the quartz stockwork veins to a near meteoric water composition in kaolinite from the advanced argillic alteration. Data points for pyrophyllite and the quartz-sulphide-gold-anhydrite veins lie about midway between the magmatic and meteoric water end-member compositions. The spatial association between porphyry Cu-Mo-Au mineralisation, advanced argillic alteration and quartz-sulphide-gold-anhydrite veins suggests that they are all genetically part of the same hydrothermal system. This is consistent with K-Ar dates of 11.6-10.7 Ma for the intrusive porphyry, for alunite in the advanced argillic alteration, and for sericite selvages from quartz-gold veins in the Thames district. 相似文献
11.
We report the occurrence of sillimanite in sapphirine-bearing granulites near Pedapalli town in the north eastern part of the Eastern Dharwar Craton (EDC). The sapphirine-bearing granulites of the Pedapalli area display evidence of metamorphic reactions involved in the formation of diverse mineral assemblages documented in different types of reaction textures. The common stable assemblage contains sapphirine-spinel-orthopyroxene-cordieriteplagioclage-corundum-sillimanite. The P-T evolution of these sapphirine granulites has been constrained by using the TWEEQU program. Temperature of formation of sapphirine-spinel assemblages is high, around 800 °C, and pressure ca. 8 kbar. The assemblage reported in this study has important bearing on the high-temperature metamorphism and exhumation history of the EDC. 相似文献
12.
Regina Freiberger Lutz Hecht Michel Cuney Giulio Morteani 《Contributions to Mineralogy and Petrology》2001,141(4):415-429
Secondary Ca-Al silicates are used to constrain the P-T-x conditions of the very early post-magmatic stage of the intermediate to basic Hercynian plutonic complexes of Charroux-Civray (NW Massif Central, France) and Fichtelgebirge (NE Bavaria, Germany). The secondary Ca-Al silicates hydrogarnet, prehnite, pumpellyite, epidote and laumontite form lenses within unaltered or only slightly chloritized biotite. Hydrogarnet as the first occurring Ca-Al silicate phase crystallizes at temperatures above 340 °C. The common paragenesis prehnite + pumpellyite post-dates hydrogarnet and indicates rather narrow ranges of temperature (200-280 °C) and pressure (2-3 kbar). Laumontite is formed at the end of Ca-Al silicate crystallization (180-260 °C, 1-3 kbar), mostly in small fractures in association with prehnite and adularia. The observed crystallization sequence of the Ca-Al silicates and their stabilities define a retrograde alteration path for the plutonic rocks. The Ca-Al silicate assemblage results from an early pervasive alteration of the plutonic rocks by low XCO2 fluids during post-magmatic cooling. Subsolidus cooling starts at about 4 kbar at solidus temperatures as indicated by magmatic epidote stability, hornblende barometry and fluid inclusion data, and continues under slightly decreasing pressure (uplift) down to 2-3 kbar at 200-280 °C (prehnite-pumpellyite paragenesis). This shows that Ca-Al silicate assemblages may be a unique tool to constrain the P-T conditions of the subsolidus cooling of intermediate to basic plutonic bodies. 相似文献
13.
In the Boi Massif of Western Timor the Mutis Complex, which is equivalent to the Lolotoi Complex of East Timor, is composed of two lithostratigraphical components: various basement schists and gneisses; and the dismembered remnants of an ophiolite. Cordierite-bearing pelitic schists and gneisses carry an early mineral assemblage of biotite + garnet + plagioclase + Al-silicate, but contain no prograde muscovite; sillimanite occurs in a textural mode which suggests that it replaced and pseudomorphed kyanite at an early stage and some specimens of pelitic schist contain tiny kyanite relics in plagioclase. Textural relations between, and mineral chemistries of, ferro-magnesian phases in these pelitic chists and gneisses suggest that two discontinuous reactions and additional continuous compositional changes have been overstepped, possibly with concomitant anatexis, as a result of decrease in Pload during high temperature metamorphism. The simplified reactions are: garnet and/or biotite + sillimanite + quartz + cordierite + hercynite + ilmenite + excess components. P-T conditions during the development of the early mineral assemblage in the pelitic gneisses are estimated to have been P + 10 kbar and T > 750°C, based upon the plagioclase-garnet-Al-silicate-quartz geobarometer and the garnet-biotite geothermometer. P-T conditions during the subsequent development of cordierite-bearing mineral assemblages in the pelitic gneisses are estimated to have been P + 5 kbar and T + 700°C with XH2O < 0.5, based upon the Fe content of cordierite occurring in the assemblage quartz + plagioclase + sillimanite + biotite + garnet + cordierite coexisting with melt. Final equilibration between some of the phases suggests that conditions dropped to P > 2.3 kbar and T > 600°C. A similar exhumation P-T path is suggested for the pelitic schists with early metamorphic conditions of P > 6.2 kbar and T > 745°C and subsequent development of cordierite under conditions in the range P = 3-4 kbar and T = 600-700°C. The tectonic implications of these P-T estimates are discussed and it is concluded that the P-T path followed by these rocks was caused by decompression during rifting and synmetamorphic ophiolite emplacement resulting from processes during the initiation and development of a convergent plate junction located in Southeast Asia during late Jurassic to Cretaceous time. 相似文献
14.
Niuxinshan is a typical example of the numerous mesothermal gold deposits formed during Mesozoic tectono-magmatic reactivation
of the Archean North China Craton in eastern Hebei province. Gold occurs in quartz-sulfide lodes in Archean amphibolites and
also in greisen zones in the Mesozoic Niuxinshan granite stock. Four mineralization stages can be recognized from early to
late: (1) quartz-K-feldspar, (2) quartz-pyrite, (3) quartz-polysulfide, and (4) quartz-carbonate. Gold mineralization mainly
occurs in stages 2 and 3. Fluid inclusions in quartz and fluorite from greisen zones in the Niuxinshan granite, and inclusions
in vein quartz and sphalerite from stages 1 to 3 in the amphibolites, have been studied by microthermometry. Three compositional
types of inclusions are recognized: type 1 (Tp1) are H2O-CO2-bearing inclusions and include primary (Tp1-P) and secondary (Tp1-S) inclusions. These are found in quartz and fluorite from
the greisen zones as well as in vein quartz and sphalerite from stages 1 to 3. The Tp1-P inclusions are considered to represent
the gold-bearing hydrothermal fluids. Type 2 (Tp2-S) are secondary H2O-CO2 + solid phase inclusions in fluorite from the greisen zones. Type 3 (Tp3-S) are secondary aqueous inclusions with a solid
phase which coexist with the Tp2-S in fluorite from the greisen zones. The Tp1-P inclusions show variable VCO2 (commonly 0.3 to 0.6) and XCO2 values (mainly 0.1 to 0.4). The salinities of inclusions cluster around 3 to 11 wt.% NaCl equivalent and their homogenization
temperatures to the liquid phase (Th(L)) fall dominantly in the range of 260 to 360 °C. The compositional variations of inclusions in stage 1 probably result
from exsolution of magmatic fluids at various stages; immiscibility or boiling of the fluids can be ruled out. The compositional
variations of inclusions in the greisen zones and in vein stages 2 and 3 are attributed to cooling, mixing (dilution), and
necking-down of the fluids. The Tp1-S and Tp2-S inclusions show salinities of 3 to 6 wt.% NaCl equivalent and XCO2 values of 0.04 to 0.17. Th(L) clusters at 240 to 260 °C. The Tp3-S inclusions have salinities of 3 to 6 wt.% NaCl equivalent and Th(L) of 170 to 240 °C. Isochoric reconstructions, combined with oxygen and sulfur isotope geothermometry of mineral pairs,
give trapping P-T conditions for the gold-bearing fluids. The greisen zones formed at 310 to 460 °C and 1.3 to 3.7 kbar; stage 1 veins at 300
to 430 °C and 1.2 to 3.7 kbar; stage 2 veins at 290 to 380 °C and 1 to 3 kbar; stage 3 veins at 250 to 350 °C and 1 to 3 kbar.
H2O-CO2 fluids with low to moderate salinities and moderate to high densities (0.66 to 1.01 g/cm3) dominated at early mineralization stages, and evolved towards H2O-richer and CO2- and less saline fluids through time. The retrograde P-T evolution probably resulted from regional uplift and cooling of gold-bearing hydrothermal fluids. The gold bisulfide complex
was dominant in the fluids during mineralization and gold deposition was mainly induced by decreases of temperature and pressure,
as well as destabilization of the bisulfide complex during sulfidization of wall rocks.
Received: 16 March 1998 / Accepted: 11 January 1999 相似文献
15.
K-feldspar–plagioclase–quartz mineral textures aswell as biotite and hornblende compositions are compared forsuites of metamorphosed mafic rocks from two widely separatedtraverses. A portion of either traverse has experienced a high-gradedehydration event transforming it from an H2O-rich, hornblende-bearingzone to an H2O-poor, hornblende-free, orthopyroxene-bearing,‘granulite facies’ zone at 700–800°C and7–8 kbar. In the Kigluaik Mountains, Seward Peninsula,Alaska, dehydration took place over an 85 cm thick layer ofmetatonalite in contact with a marble during regional metamorphismand involved a CO2-rich fluid, whereas for the Val Strona diOmegna traverse, Ivrea–Verbano Zone, northern Italy, dehydrationtook place over a 3–4 km thick sequence of metabasitesinterlayered with metapelites in a contact metamorphic eventinvolving basaltic magmas intruded at the base of the sequence.Orthopyroxene-bearing samples from both dehydration zones showmicro-veins of K-feldspar along quartz and plagioclase grainboundaries as well as replacement antiperthite in plagioclase.K came primarily from the breakdown of hornblende + quartz toorthopyroxene ± clinopyroxene, feldspar and fluid. Biotiteeither was stabilized or formed in the dehydration zones andis enriched in Ti, Mg, F and Cl relative to biotite in the amphibolitefacies zone. KEY WORDS: KCl–NaCl brines; metasomatism; granulite facies metamorphism; charnockite–enderbite; orthopyroxene; K-feldspar; biotite; hornblende 相似文献
16.
Solomon Tadesse 《Gondwana Research》2004,7(2):481
The Lega Dembi Primary Gold Deposit in southern Ethiopia is related to the shear zone-hosted vein in the Neoproterozoic metamorphosed volcano-sedimentary succession of greenschist- to amphibolite-facies metamorphism. The rocks consists of a sequence of biotite-feldspar-quartz schists, carbonaceous mica-schists, amphibolites and basic to ultrabasic rocks. This unit is separated from a foot wall biotite gneiss by a major shear zone. The ore bodies are hosted in the volcano-sedimentary sequence and consist of swarms of quartz veins, lenses, and stockworks that propagated along mesoscale ductile to brittle-ductile shear zones.The mineralization is defined by a complex paragenesis of gold in association with Cu-Pb-Zn-Fe sulphides, tellurides and sulphosalts. The presence of Ni-bearing minerals in amphibolites of the host sequence, together with the ore mineral association, suggests an origin related to mafic volcanism. 相似文献
17.
Toshiaki Tsunogae M. Santosh Yasuhito Osanai Masaaki Owada Tsuyoshi Toyoshima Tomokazu Hokada 《Contributions to Mineralogy and Petrology》2002,143(3):279-299
The ultrahigh-temperature (UHT) metamorphism of the Napier Complex is characterized by the presence of dry mineral assemblages, the stability of which requires anhydrous conditions. Typically, the presence of the index mineral orthopyroxene in more than one lithology indicates that H2O activities were substantially low. In this study, we investigate a suite of UHT rocks comprising quartzo-feldspathic garnet gneiss, sapphirine granulite, garnet-orthopyroxene gneiss, and magnetite-quartz gneiss from Tonagh Island. High Al contents in orthopyroxene from sapphirine granulite, the presence of an equilibrium sapphirine-quartz assemblage, mesoperthite in quartzo-feldspathic garnet gneiss, and an inverted pigeonite-augite assemblage in magnetite-quartz gneiss indicate that the peak temperature conditions were higher than 1,000 °C. Petrology, mineral phase equilibria, and pressure-temperature computations presented in this study indicate that the Tonagh Island granulites experienced maximum P-T conditions of up to 9 kbar and 1,100 °C, which are comparable with previous P-T estimates for Tonagh and East Tonagh Islands. The textures and mineral reactions preserved by these UHT rocks are consistent with an isobaric cooling (IBC) history probably following an counterclockwise P-T path. We document the occurrence of very high-density CO2-rich fluid inclusions in the UHT rocks from Tonagh Island and characterize their nature, composition, and density from systematic petrographic and microthermometric studies. Our study shows the common presence of carbonic fluid inclusions entrapped within sapphirine, quartz, garnet and orthopyroxene. Analysed fluid inclusions in sapphirine, and some in garnet and quartz, were trapped during mineral growth at UHT conditions as 'primary' inclusions. The melting temperatures of fluids in most cases lie in the range of -56.3 to -57.2 °C, close to the triple point for pure CO2 (-56.6 °C). The only exceptions are fluid inclusions in magnetite-quartz gneiss, which show slight depression in their melting temperatures (-56.7 to -57.8 °C) suggesting traces of additional fluid species such as N2 in the dominantly CO2-rich fluid. Homogenization of pure CO2 inclusions in the quartzo-feldspathic garnet gneiss, sapphirine granulite, and garnet-orthopyroxene gneiss occurs into the liquid phase at temperatures in the range of -34.9 to +4.2 °C. This translates into very high CO2 densities in the range of 0.95-1.07 g/cm3. In the garnet-orthopyroxene gneiss, the composition and density of inclusions in the different minerals show systematic variation, with highest homogenization temperatures (lowest density) yielded by inclusions in garnet, as against inclusions with lowest homogenization (high density) in quartz. This could be a reflection of continued recrystallization of quartz with entrapment of late fluids along the IBC path. Very high-density CO2 inclusions in sapphirine associated with quartz in the Tonagh Island rocks provide potential evidence for the involvement of CO2-rich fluids during extreme crustal temperatures associated with UHT metamorphism. The estimated CO2 isochores for sapphirine granulite intersect the counterclockwise P-T trajectory of Tonagh Island rocks at around 6-9 kbar at 1,100 °C, which corresponds to the peak metamorphic conditions of this terrane derived from mineral phase equilibria, and the stability field of sapphirine + quartz. Therefore, we infer that CO2 was the dominant fluid species present during the peak metamorphism in Tonagh Island, and interpret that the fluid inclusions preserve traces of the synmetamorphic fluid from the UHT event. The stability of anhydrous minerals, such as orthopyroxene, in the study area might have been achieved by the lowering of H2O activity through the influx of CO2 at peak metamorphic conditions (>1,100 °C). Our microthermometric data support a counterclockwise P-T path for the Napier Complex. 相似文献
18.
大量来自于华北陆块的高压变质岩被发现发育于苏鲁构造杂岩带中,给俯冲带上盘物质如何卷入陆-陆俯冲碰撞作用的研究带来新的契机.通过对乳山地区（含榴）斜长角闪岩进行岩石学、矿物化学及相平衡模拟的研究,发现其保留有3个不同变质演化阶段的矿物组合,峰前矿物组合为粗粒石榴子石+斜长石+角闪石+石英+钛铁矿;峰期矿物组合由石榴子石+单斜辉石+斜长石+角闪石+石英+钛铁矿组成,为典型高角闪岩相矿物组合;峰后退变质阶段矿物组合为角闪石+斜长石+石英+石榴子石+钛铁矿,发育有典型的“白眼圈”结构.相平衡模拟与温压计算表明,乳山午极石榴斜长角闪岩峰前变质阶段的P-T条件分别为P=6.4~7.0 kbar、T=610~640℃,表明其俯冲至30 km左右的地壳深度;峰期变质阶段P-T条件分别为P=9.3~10.0 kbar、T=700~730℃,表明其已俯冲至36~40 km的地壳深度,峰后退变质阶段P-T条件分别为P=5.2~5.8 kbar、T=680~710℃.锆石U-Pb定年结果表明乳山午极石榴斜长角闪岩原岩时代为1 734±24 Ma,龙角山水库斜长角闪岩变质时代为1 849±28 Ma,研究表明二者均来源于华北构造岩片.结合前人研究资料,推测乳山地区石榴斜长角闪岩原岩可能经历三叠纪俯冲作用并发生变质;其与杂岩带中来自华南的构造岩片发生混杂,共同构成华北-华南板块间宽约80~100 km的构造杂岩带. 相似文献
19.
R. T. OROZBAEV A. TAKASU A. B. BAKIROV M. TAGIRI K. S. SAKIEV 《Journal of Metamorphic Geology》2010,28(3):317-339
Eclogites and related high‐P metamorphic rocks occur in the Zaili Range of the Northern Kyrgyz Tien‐Shan (Tianshan) Mountains, which are located in the south‐western segment of the Central Asian Orogenic Belt. Eclogites are preserved in the cores of garnet amphibolites and amphibolites that occur in the Aktyuz area as boudins and layers (up to 2000 m in length) within country rock gneisses. The textures and mineral chemistry of the Aktyuz eclogites, garnet amphibolites and country rock gneisses record three distinct metamorphic events (M1–M3). In the eclogites, the first MP–HT metamorphic event (M1) of amphibolite/epidote‐amphibolite facies conditions (560–650 °C, 4–10 kbar) is established from relict mineral assemblages of polyphase inclusions in the cores and mantles of garnet, i.e. Mg‐taramite + Fe‐staurolite + paragonite ± oligoclase (An<16) ± hematite. The eclogites also record the second HP‐LT metamorphism (M2) with a prograde stage passing through epidote‐blueschist facies conditions (330–570 °C, 8–16 kbar) to peak metamorphism in the eclogite facies (550–660 °C, 21–23 kbar) and subsequent retrograde metamorphism to epidote‐amphibolite facies conditions (545–565 °C and 10–11 kbar) that defines a clockwise P–T path. thermocalc (average P–T mode) calculations and other geothermobarometers have been applied for the estimation of P–T conditions. M3 is inferred from the garnet amphibolites and country rock gneisses. Garnet amphibolites that underwent this pervasive HP–HT metamorphism after the eclogite facies equilibrium have a peak metamorphic assemblage of garnet and pargasite. The prograde and peak metamorphic conditions of the garnet amphibolites are estimated to be 600–640 °C; 11–12 kbar and 675–735 °C and 14–15 kbar, respectively. Inclusion phases in porphyroblastic plagioclase in the country rock gneisses suggest a prograde stage of the epidote‐amphibolite facies (477 °C and 10 kbar). The peak mineral assemblage of the country rock gneisses of garnet, plagioclase (An11–16), phengite, biotite, quartz and rutile indicate 635–745 °C and 13–15 kbar. The P–T conditions estimated for the prograde, peak and retrograde stages in garnet amphibolite and country rock are similar, implying that the third metamorphic event in the garnet amphibolites was correlated with the metamorphism in the country rock gneisses. The eclogites also show evidence of the third metamorphic event with development of the prograde mineral assemblage pargasite, oligoclase and biotite after the retrograde epidote‐amphibolite facies metamorphism. The three metamorphic events occurred in distinct tectonic settings: (i) metamorphism along the hot hangingwall at the inception of subduction, (ii) subsequent subduction zone metamorphism of the oceanic plate and exhumation, and (iii) continent–continent collision and exhumation of the entire metamorphic sequences. These tectonic processes document the initial stage of closure of a palaeo‐ocean subduction to its completion by continent–continent collision. 相似文献
20.
Metamorphic Evolution of Garnet-Epidote-Biotite Gneiss from the Moine Supergroup, Scotland, and Geotectonic Implications 总被引：1，自引：0，他引：1
Metapelitic gneisses from the Glenfinnan Group of the MoineSupergroup, Scotland, contain sparse large and numerous smallgarnets, associated with complex zoned epidote and plagioclasein a biotite matrix. The large garnets show four zones (AI–AIV),whereas the small garnets show three or fewer zones, indicatingsuccessive garnet nucleation with increasing nucleation densities.Garnet zones AI and AIV grew under static conditions, whereasthe formation of AII and AIII was accompanied by deformation.Garnet zones AI and AII were formed in the assemblage (all +biotite + epidote + plagioclase + quartz + fluid + apatite)garnet + chlorite + muscovite ± ilmenite ± sphene± magnetite; zone AIII in the assemblage garnet + muscovite+ sphene ± magnetite; and zone AIV in the assemblagegarnet + sphene ± ilmenite. The chemical zonation andmicrostructures of garnet A indicate two important discontinuities;one at the transition between garnet zones AI and AII, and asecond between zones AII and AIII, which correlate with complexzonation shown by epidote and plagioclase. These discontinuitiesmay result from polymetamorphic garnet growth during differentorogenic cycles affecting the Moine Supergroup. Geothermobarometriccalculations and Gibbs method modelling provide evidence thatgarnet zone AI grew rapidly during heating from about 550 to560°C at pressures of about 4–6 kbar. In contrast,the formation of zone AII was accompanied by nearly isothermalcompression from 6 to 8·5 kbar (560 575°C), indicatingcrustal stacking. After a certain period of cooling, garnetzone AIII grew during renewed heating at P–T conditionsof about 640°C and pressures between 5 and 9 kbar. Growthof garnet AIV was accompanied by further temperature rise, reachingmaximum conditions of about 670°C at 5 kbar. KEY WORDS: epidote; garnet; Gibbs method; Moine Supergroup; P–T path 相似文献