首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
By using the lower bound finite elements limit analysis, the pullout capacity of an inclined strip anchor plate embedded in a cohesionless soil medium has been computed with an inclusion of pseudo-static horizontal earthquake body forces. The variation of the pullout capacity factor (F γ ) with changes in horizontal earthquake acceleration co-efficient (α h ) has been computed by varying the inclination angle (β) of the anchor plate between 0° and 90°. The results clearly reveal that the pullout capacity factor (F γ ) decreases significantly with an increase in the value of α h . The reduction in the pullout resistance due to seismic forces (1) becomes much more extensive for a vertical anchor plate as compared to the horizontal anchor, (2) decreases generally with increases in the soil friction angle (?) and (3) increases with an increase in friction angle between soil and anchor plate (δ). The developments of the failure zone around the anchor plate were also examined by varying α h and β. The results obtained from the analysis compare well with the solutions reported in literature.  相似文献   

2.
Vertical plate anchors provide an economical solution to safely resist the large horizontal forces experienced by the foundation of different structures such as bulkheads, sheet piles, retaining walls and so forth. This paper develops a multivariate adaptive regression spline (MARS) model-based approach for the determination of horizontal pullout capacity (P u ) of vertical plate anchors buried in cohesionless soil by utilizing experimental results reported by different researchers. Based on the collection of forty different pullout experimental test results reported in the literature for anchors buried in loose to dense cohesionless soil with an embedment ratio ranges from 1 to 5, a predictive approach for P u of vertical plate anchors has been developed in terms of non-dimensional pullout coefficient (M γq ). The capability of the proposed MARS model for estimating the values of M γq is examined by comparing the results obtained in the present study with those methods available in the literature. Using different statistical error measure criteria, this study indicates that the present approach is efficient in estimating the horizontal pullout capacity of vertical plate anchors as compared to other methods. The sensitivity analysis indicates that the embedment ratio (H/h, where H = embedment depth of anchor, and h = height of anchor) and internal friction angle (?) of soil mass are the two most important parameters for the evaluation of non-dimensional pullout coefficient (M γq ) using the proposed MARS model.  相似文献   

3.
Free surface flow of an incompressible fluid over a shallow plane/undulating horizontal bed is characteristically turbulent due to disturbances generated by the bed resistance and other causes. The governing equations of such flows in one dimension, for finite amplitude of surface elevation over the bed, are the Continuity Equation and a highly nonlinear Momentum Equation of order three. The method developed in this paper introduces the “discharge” variable q = η U, where η = elevation of the free surface above the bed level, and U = average stream-wise forward velocity. By this substitution, the continuity equation becomes a linear first-order PDE and the momentum equation is transformed after introduction of a small approximation in the fifth term. Next, it is shown by an invertibility argument that q can be a function of η: q = F(η), rendering the momentum equation as a first order, second degree ODE for F(η), that can be be integrated by the Runge-Kutta method. The continuity equation then takes the form of a first order evolutionary PDE that can be integrated by a Lax-Wendroff type of scheme for the temporal evolution of the surface elevation η. The method is implemented for two particular cases: when the initial elevation is triangular with vertical angle of 120 ° and when it has a sinusoidal form. The computations exhibit the physically interesting feature that the frontal portion of the propagating wave undergoes a sharp jump followed by tumbling over as a breaker. Compared to other discretization methods, the application of the Runge-Kutta and an extended version of the Lax-Wendroff scheme is much easier.  相似文献   

4.
In this paper, analytical methods, artificial neural network (ANN) and multivariate adaptive regression splines (MARS) techniques were utilised to estimate the discharge capacity of compound open channels (COC). To this end, related datasets were collected from literature. The results showed that the divided channel method with a coefficient of determination (R 2) value of 0.76 and root mean square error (RMSE) value of 0.162 has the best performance, among the various analytical methods tested. The performance of applied soft computing models with R 2=0.97 and RMSE = 0.03 was found to be more accurate than analytical approaches. Comparison of MARS with the ANN model, in terms of developed discrepancy ratio (DDR) index, showed that the accuracy of MARS model was better than that of MLP model. Reviewing the structure of the derived MARS model showed that the longitudinal slope of the channel (S), relative flow depth (H r ) and relative area (A r ) have a high impact on modelling and forecasting the discharge capacity of COCs.  相似文献   

5.
Equations of motion containing a small parameter μ are derived for stars at the peripheries of open star clusters. The parameter μ is obtained for six numerical open-cluster models. The general analytical solution of these equations of motion for μ = 0 is found. An iterative method is used to derive the frequencies of the stellar motions for first-order expansions in μ of the solutions of the equations of motion for stars at the cluster periphery. Applications of the results are discussed.  相似文献   

6.
The Jahrum Formation (Upper Paleocene to Middle Eocene) is composed of carbonate and dolomitic carbonate rocks in the Zagros Basin. The Zagros is located at the boundary between the Arabian and Eurasian lithosphere plates and represent the orogenic response to a collision between Eurasia and advancing Arabia during the Cenozoic. The study area is located in the northern part of Kuh-E-Tudej, ~175 km southeast of Shiraz in the Folded Zagros Zone. The Jahrum Formation at Kuh-E-Tudej, with a thickness of 190 m, consists of medium to massive bedded limestone. The following foraminiferal index species are identified in the studied section: Fallotella alavensis, Kathina sp., Miscellanea sp., Lockhartia sp.,Orbitolites shirazeinsis, Nummulites sp., Opertorbitolites sp., Dictyoconus cf. egyptiensis, Orbitolites cf. complanatus, Dictyoconus sp., Coskinolina sp., Somalina stefaninii, Discocyclina sp., Praerhapydionina sp., Coskinolina cf. liburnica, Nummulites cf. globulus, Nummulites cf. aturicus, and Alveolina sp. The age of the studied sediments ranges from Upper Paleocene to Middle Eocene. The microbiostratigraphic studies revealed four biozones based on the foraminifers identified in the studied section.  相似文献   

7.
The specific energy (SE) is the most important parameter to estimate the energy consumption in tunnel boring machines (TBMs). It is defined as the amount of required energy to excavate a unit volume of rock mass which used to predict the performance of TBMs. Several models are used to estimate the SE based on different parameters such as the rock mass properties, disc cutter dimensions and cutting geometry. The aim of this work is to propose new relations between the SE and the strain energy of rock mass (W) using the geological mappings of rock mass and TBM operational parameters from Amir-Kabir Water Transferring Tunnel of Iran. W is an appropriate criterion to estimate SE because it is a function of different parameters such as rock mass behavior, pre and post failure properties and peak and residual strains. In this study, to increase the correlation coefficient of relation between the mentioned parameters, the rock mass is classified in two methods, in the first method according to the geological strength index (GSI) all data is classified in three classes such as weak, fair and good and in the second method using the drop to deformation modulus ratio (η) the classification of data is performed in three classes such as η < 0.05, 0.05 ≤ η < 10 and η ≥ 10. The results show that there are direct relations between both parameters. It is suggested to estimate SE in all rock mass classes using the proposed relations based on GSI classification.  相似文献   

8.
The area of investigation was subject to multifactor analysis of the relationship between the maximum amount of mudflow solid sediments (W) and parameters such as the mudflow basin area (S), average channel slope (α), and mudflow channel length (L). They were used to obtain analytical expressions in order to approximate the W(S, L, α) relation based on the mudflow genesis and source height. Statistical data on mudflow manifestations in different basins in the North Caucasus covering more than fifty years were used to obtain the analytical expressions in order to assess the maximum volume of mudflow solid sediments.  相似文献   

9.
The full version of the magnetohydrodynamical (MHD) theory of accretion of a perfect fluid with an ultrahard equation of state, p = μ ~ ρ2 (where p is the pressure, μ the total energy density, and ρ the fluid density), onto a moving Schwarzschild black hole is considered. Exact and approximate analytical solutions have been found. It is shown that smooth continuous solutions exist only in the case when a single critical sound surface is formed.  相似文献   

10.
The accuracies of three different evolutionary artificial neural network (ANN) approaches, ANN with genetic algorithm (ANN-GA), ANN with particle swarm optimization (ANN-PSO) and ANN with imperialist competitive algorithm (ANN-ICA), were compared in estimating groundwater levels (GWL) based on precipitation, evaporation and previous GWL data. The input combinations determined using auto-, partial auto- and cross-correlation analyses and tried for each model are: (i) GWL t?1 and GWL t?2; (ii) GWL t?1, GWL t?2 and P t ; (iii) GWL t?1, GWL t?2 and E t ; (iv) GWL t?1, GWL t?2, P t and E t ; (v) GWL t?1, GWL t?2 and P t?1 where GWL t , P t and E t indicate the GWL, precipitation and evaporation at time t, individually. The optimal ANN-GA, ANN-PSO and ANN-ICA models were obtained by trying various control parameters. The best accuracies of the ANN-GA, ANN-PSO and ANN-ICA models were obtained from input combination (i). The mean square error accuracies of the ANN-GA and ANN-ICA models were increased by 165 and 124% using ANN-PSO model. The results indicated that the ANN-PSO model performed better than the other models in modeling monthly groundwater levels.  相似文献   

11.
The strong adaptability of Broussonetia papyrifera (L.) Vent. to low phosphorus (P) conditions can be attributed to the large amount of root-exuded organic acids and the high efficiency of P extraction. However, microelement contents are influenced by low-P stress, and their effects on the photosynthetic capability of B. papyrifera remain unknown. In this study, we investigated the effects of low-P treatment on net photosynthetic rate (P N); chlorophyll a fluorescence (ChlF) characteristics; and Fe, Mn, Cu, and Zn contents of B. papyrifera and Morus alba L. seedlings. Results show that B. papyrifera exhibited better photosynthetic capability under moderate P deficiency (0.125, 0.063, and 0.031 mmol/L P treatments), whereas the photosynthetic capability of M. alba decreased under moderate and severe P deficiency (0.016 and 0 mmol/L P treatments). Under moderate P deficiency, the decrease in Cu and Zn contents in B. papyrifera was lower than that in M. alba. Under severe P deficiency, a considerable decrease of photosynthetic capability in B. papyrifera and M. alba was associated with low Cu and Zn contents. The P N of the two Moraceae species exhibited a better correlation with Cu and Zn contents than with Fe or Mn content. P deficiency could not only decrease cyclic photophorylation and photosynthetic efficiency, but could also affect the stability of thylakoid membrane structure and electron transport efficiency by influencing the contents of Cu or Zn, thereby affecting photosynthesis.  相似文献   

12.
Transmissivity (T) is one of the most important parameters in groundwater studies, and is generally estimated from pumping tests. T can also be deduced from abundantly available specific-capacity (Q/s) data by using analytical and/or empirical approaches, further upscaled by geostatistical methods. A different, remote sensing based, hydrogeomorphological approach is proposed, to upscale T from point- or well-scale to aquifer-scale, and it is applied to the piedmont alluvial aquifer system of Doon Valley in India. In the first step, Q/s and T data-pairs available from aquifer tests were used to establish an empirical, logarithmic relation. Subsequently, satellite imagery along with available data from published and unpublished maps, literature sources and ground surveys were used to divide the aquifer system into major hydrogeomorphological domains that control the groundwater occurrence and flow. Then, the T data derived from Q/s (using the empirical relation) and that available from pumping tests at well-scale were upscaled to aquifer-scale by averaging the T values within each hydrogeomorphological domain. Such a stratification approach is especially useful in areas where availability of only a few data-pairs of known Q/s and T limit the use of geostatistical techniques. A comparative study of the published empirical relations between Q/s and T in various hydrogeologic settings revealed that the relation obtained for Doon Valley aquifer system is close to that found for a similar alluvial aquifer system in Morocco.  相似文献   

13.
The improvement in the capabilities of Landsat-8 imagery to retrieve bathymetric information in shallow coastal waters was examined. Landsat-8 images have an additional band named coastal/aerosol, Band 1: 435–451 nm in comparison with former generation of Landsat imagery. The selected Landsat-8 operational land image (OLI) was of Chabahar Bay, located in the southern part of Iran (acquired on February 22, 2014 in calm weather and relatively low turbidity). Accurate and high resolution bathymetric data from the study area, produced by field surveys using a single beam echo-sounder, were selected for calibrating the models and validating the results. Three methods, including traditional linear and ratio transform techniques, as well as a novel proposed integrated method, were used to determine depth values. All possible combinations of the three bands [coastal/aerosol (CB), blue (B), and green (G)] have been considered (11 options) using the traditional linear and ratio transform techniques, together with five model options for the integrated method. The accuracy of each model was assessed by comparing the determined bathymetric information with field measured values. The standard error of the estimates, correlation coefficients (R 2 ) for both calibration and validation points, and root mean square errors (RMSE) were calculated for all cases. When compared with the ratio transform method, the method employing linear transformation with a combination of CB, B, and G bands yielded more accurate results (standard error = 1.712 m, R 2 calibration = 0.594, R 2 validation = 0.551, and RMSE =1.80 m). Adding the CB band to the ratio transform methodology also dramatically increased the accuracy of the estimated depths, whereas this increment was not statistically significant when using the linear transform methodology. The integrated transform method in form of Depth = b 0  + b 1 X CB  + b 2 X B  + b 5 ln(R CB )/ln(R G ) + b 6 ln(R B )/ln(R G ) yielded the highest accuracy (standard error = 1.634 m, R 2 calibration = 0.634, R 2 validation = 0.595, and RMSE = 1.71 m), where R i (i = CB, B, or G) refers to atmospherically corrected reflectance values in the i th band [X i  = ln(R i -R deep water)].  相似文献   

14.
This paper investigates, using the random field theory and Monte Carlo simulation, the effects of random field discretization on failure probability, p f, and failure mechanism of cohesive soil slope stability. The spatial sizes of the discretized elements in random field Δx, Δy in horizontal and vertical directions, respectively, are assigned a series of combinational values in order to model the discretization accuracy. The p f of deterministic critical slip surface (DCSS) and that of the slope system both are analyzed. The numerical simulation results have demonstrated that both the ratios of Δy/λ y (λ y  = scale of fluctuation in vertical direction) and Δx/λ x (λ x  = scale of fluctuation in horizontal direction) contribute in a similar manner to the accuracy of p f of DCSS. The effect of random field discretization on the p f can be negligible if both the ratios of Δx/λ x and Δy/λ y are no greater than 0.1. The normalized discrepancy tends to increase at a linear rate with Δy/λ y when Δx/λ x is larger than 0.1, and vice versa for p f of DCSS. The random field discretization tends to have more considerable influence on the p f of DCSS than on that of the slope system. The variation of p f versus λ x and λ y may exhibit opposite trends for the cases where the limit state functions of slope failure are defined on DCSS and on the slope system as well. Finally, the p f of slope system converges in a more rapid manner to that of DCSS than the failure mechanism does to DCSS as the spatial variability of soil property grows from significant to negligible.  相似文献   

15.
The objective of this experimental study was to examine the effect of an upstream subsidiary triangular pillar on the development of local scour at a single circular bridge pier. The triangular pillar was placed such that its apex faced the approach flow and its base length was equal to the pier diameter (D) in all experiments. The experiments were conducted to investigate the effect of the spacing between the base of the subsidiary pillar and the bridge pier (S) and the apex angle (α) of the triangular pillar on the dimensions of the scour hole and its temporal development at different Froude numbers. The experiments were conducted in a rectangular flume under clear-water scour conditions at Froude number ranging between 0.1 and 0.3. Relative spacing (S/D) of 0, 0.5, 1, 1.5, 2, and 3, as well as apex angle (α) of 60°, 90° and 120° were tested. The results show that the maximum scour depth at the pier could be minimized using three different combinations of spacing and apex angle. The highest reduction in the maximum scour depth (d sm) of approximately 28 % was possible using S/D of 3 and α of 90° compared to the pier-alone case. Overall the performance of the 90° apex angle pillar surpassed the other two angles.  相似文献   

16.
To assess the ecotoxicological and sanitary situation in two European metropolis, Rostov-on-Don (Southern Russia) and Munich (Southern Germany), wastewaters of the two cities were examined with a panel of bacterial lux-biosensors: Vibrio aquamarinus VKPM B-11245, Escherichia coli MG1655 (pXen7), E. coli MG1655 (pRecA-lux), E. coli MG1655 (pSoxS-lux), E. coli MG1655 (pKatG-lux), E. coli MG1655 (pIbpA-lux), E. coli MG1655 (GrpE-lux), E. coli MG1655 (pFabA-lux). The presence of different genotoxic compounds and substances with the oxidative and membrane-damaging effects was revealed in contaminated wastewater with the applied panel of the lux-biosensors. The integral toxicity was approximately the same in both cities but demonstrated opposite trends. The presence of genotoxicants and peroxides was higher in the majority of the Munich wastewater samples. There were also differences in the presence of individual toxicants. The presence of the genotoxic compounds might also promote development and dissemination of several antibiotic resistance traits found in microorganisms, a feature more pronounced in Rostov-on-Don wastewaters. By means of polymerase chain reaction assay, antibiotic resistance genes to such antibiotics as ermB, vim and vanB were revealed in two Munich samples. Antibiotic resistance genes were present at all Rostov samples, and genes ndm, vanA, vanB and ermB were found. Taken together, the proposed analytical approach with the application of the constructed panel of biosensors can be applied for monitoring of the ecotoxicological contamination in the wastewaters of large cities.  相似文献   

17.
The stability of nonstoichiometric clinopyroxenes in the Di-CaEsk join was experimentally studied, and phase diagrams were constructed for this join at pressures of 2.0 and 3.0 GPa. It was found that melting in the diopside part of the join occurs at anomalously low temperatures, and nonstoichiometric clinopyroxene coexists with a phase approaching diopside in composition. Phase relations along the Di-CaEsk join can be described and consistently interpreted only assuming that the diopside phase (α-diopside) is thermodynamically stable. The following phase volumes were observed along the solidus of the join at a pressure of 3.0 GPa: Cpx, αDi+Cpx, αDi+Cpx+Qtz, αDi+Cpx+Grt+Qtz, Cpx+Grt+Qtz, Cpx+Grt+Ky+Qtz, Grt+Ky+Qtz. Melting occurs via the eutectic reaction αDi+Cpx+Grt+Qtz=L at a temperature of about 1200°C in the diopside part of the system and via the eutectic reaction Cpx+Grt+Ky+Qtz=L at a temperature of 1400°C in the calcium-rich part of the system. At a pressure of 2.0 GPa, melting occurs at temperatures of 1200–1300°C via the eutectic reaction αDi+Cpx+ An + Qtz=L. The invariant equilibrium (L, An, Cpx, Grt, αDi, Qtz) lies within the pressure range 2.0–3.0 GPa. Nonstoichiometric clinopyroxenes form complex solid solutions, the compositions of which are not strictly confined to the Di-CaEsk join and depend on temperature, pressure, and phase association. Grossular garnets coexist with nonstoichiometric clinopyroxenes and α-diopside.  相似文献   

18.
In this study, single crystals of pure enstatite (Mg2Si2O6) were synthesised under water-saturated conditions at 4 and 8 GPa and 1,150°C with variable silica activity, leading to phase assemblages enstatite + forsterite, enstatite or enstatite + coesite. Run products were investigated using an FTIR spectrometer equipped with a focal plane array detector enabling IR imaging with a lateral pixel resolution of 2.7 μm. IR spectra within the OH-absorption region show two different groups of absorption bands: group 1 (wavenumbers at 3,592 and 3,687 cm?1) shows strongest absorptions for E||n β, whereas group 2 (wavenumbers at 3,067 and 3,362 cm?1) shows strongest absorptions for E||n γ. The groups are related to different defect types, group 1 to tetrahedral defects (T-site vacancies) and group 2 to octahedral defects (M-site vacancies). The intensity ratio of the bands within one group (i.e. A 3067/A 3362 and A 3592/A 3687) and the intensity ratio of E||n γ and E||n α in group 2 bands remain constant within error. In contrast, the intensity ratio of group 2 to group 1 absorption bands [e.g. (A 3362)/(A 3687)] is sensitive to the SiO2 activity and pressure. On the basis of the results of this and previous studies, a barometer for pure orthoenstatite coexisting with forsterite can be formulated:\( P\,[{\text{GPa}}] = 1.056 + \sqrt {{\frac{{1.025 - A_{{\left( {3362} \right)/\left[ {(3362) + (3687)} \right]}} }}{0.009}}} , \) where A (3362) and A (3687) are the integral absorbances of the component E||n γ of the absorption bands at 3,362 cm?1 and the component E||n β of the absorption band at 3,687 cm?1, respectively.  相似文献   

19.
It is shown that the approximation of the complex, tidally distorted shape of a star as a circular disc with local line profiles and a linear limb-darkening law, which is usually applied when deriving equatorial stellar rotation velocities from line profiles, leads to overestimation of the equatorial velocity V rot sin i and underestimation of the component mass ratio q = M x /M v . A formula enabling correction of the effect of these simplifying assumptions on the shape of a star is used to re-determine the mass ratios q and the masses of the black holes M x and visual components M v in low-mass X-ray binary systems containing black holes. Taking into account the tidal–rotational distortion of the stellar shape can significantly increase the mass ratios q = M x /M v , reducing M v , while M x changes only slightly. The resulting distribution of M v attains its maximum near M v ? 0.35M ⊙, in disagreement with the results of population synthesis computations realizing standard models for Galactic X-ray novae with black holes. Possible ways to overcome this inconsistency are discussed. The derived distribution of M x also differs strongly from the mass distribution for massive stars in the Galaxy.  相似文献   

20.
A biometric study of Chattian–Early Aquitanian taxa from shallow marine transgressive carbonate deposits in the Oligo-Miocene sedimentary basin of Kirkuk, Iraq, provides new insight into their taxonomy, stratigraphy, and palaeobiogeography. Their evolution is based on a distinct change in general nepiont morphology, which agrees with the principle of nepionic acceleration. Each Miogypsinoides group is represented by more than one lineage. We demonstrate for the first time the parallel evolution of Miogypsina and Miogypsinoides in the late Chattian of north-eastern Iraq. We assign specimens into two lineage groups: Miogypsinoides formosensis of the Late Chattian, with smaller embryon and longer post-embryonic spirals, which evolved into Miogypsinoides bantamensis of the Early Aquitanian; and Miogypsinoides sivasensis, with shorter spirals and larger embryon, originally found in late Chattian to Early Aquitanian deposits. This group evolved into large embryon and longer post-embryonic spiral specimens of the upper Azkand Formation, assigned to Miogypsinoides dehaartii and associated with Miogypsina gunteri-basraensis and M. gunteri due to their peculiar morphological features. Miogypsina specimens are related to Miogypsina basraensis, which have much smaller embryon dimensions. This part of the sequence corresponds to Ms. formosensis and is overlain by a Miogypsina ex. interc. gunteri-basraensis succession, a composite species that evolved to Miogypsina gunteri, the most common Miogypsinids taxon in the carbonate upper Azkand Formation, thereby acting as a reference for the evolution of this taxon and its transition to M. ex. interc. tani-gunteri. Miogypsinoides evolution in the Iraqi sedimentary basin is similar to Western Tethys evolution yet differs from Indo-Pacific evolution.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号