首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Continental subduction and collision normally follows oceanic subduction,with the remarkable event of formation and exhumation of high-to ultra-high-pressure(HP-UHP)metamorphic rocks.Based on the summary of numerical geodynamic models,six modes of continental convergence have been identified:pure shear thickening,folding and buckling,one-sided steep subduction,flat subduction,two-sided subduction,and subducting slab break-off.In addition,the exhumation of HP-UHP rocks can be formulated into eight modes:thrust fault exhumation,buckling exhumation,material circulation,overpressure model,exhumation of a coherent crustal slice,episodic ductile extrusion,slab break-off induced eduction,and exhumation through fractured overriding lithosphere.During the transition from subduction to exhumation,the weakening and detachment of subducted continental crust are prerequisites.However,the dominant weakening mechanisms and their roles in the subduction channel are poorly constrained.To a first degree approximation,the mechanism of continental subduction and exhumation can be treated as a subduction channel flow model,which incorporates the competing effects of downward Couette(subduction)flow and upward Poiseuille(exhumation)flow in the subduction channel.However,the(de-)hydration effect plays significant roles in the deformation of subduction channel and overriding lithosphere,which thereby result in very different modes from the simple subduction channel flow.Three-dimensionality is another important issue with highlighting the along-strike differential modes of continental subduction,collision and exhumation in the same continental convergence belt.  相似文献   

2.
A model involving buoyancy, wedging and thermal doming is postulated to explain the differential exhumation of ultrahigh-pressure (UHP) metamorphic rocks in the Dabie Mountains, China, with an emphasis on the exhumation of the UHP rocks from the base of the crust to the upper crust by opposite wedging of the North China Block (NCB). The Yangtze Block was subducted northward under the NCB and Northern Dabie microblock, forming UHP metamorphic rocks in the Triassic (240–220 Ma). After delamination of the subduction wedge, the UHP rocks were exhumed rapidly to the base of the crust by buoyancy (220–200 Ma). Subsequently, when the left-lateral Tan–Lu transform fault began to be activated, continuous north–south compression and uplifting of the orogen forced the NCB to be subducted southward under the Dabie Orogen (`opposite subduction'). Opposite subduction and wedging of the North China continental crust is responsible for the rapid exhumation of the UHP and South Dabie Block units during the Early Jurassic, at ca 200–180 Ma at a rate of ∼ 3.0 mm/year. The UHP eclogite suffered retrograde metamorphism to greenschist facies. Rapid exhumation of the North Dabie Block (NDB) occurred during 135–120 Ma because of thermal doming and granitoid formation during extension of continental margin of the Eurasia. Amphibolite facies rocks from NDB suffered retrograde metamorphism to greenschist facies. Different unit(s) and terrane(s) were welded together by granites and the wedging ceased. Since 120–110 Ma, slow uplift of the entire Dabie terrane is caused by gravitational equilibrium.  相似文献   

3.
三维板块几何形态对大陆深俯冲动力学的制约   总被引：1，自引：1，他引：0       下载免费PDF全文
大陆深俯冲及超高压变质作用是大陆动力学的重要研究内容,前人进行了系统的地质、地球物理观测以及数值模拟研究.然而,自然界中大陆板块的俯冲、碰撞及造山过程大部分具有明显的沿走向的差异性,这种典型的三维特征可能很大程度上依赖于会聚大陆板块的初始几何学和运动学特征.本文采用三维高分辨率的动力学数值模拟方法,建立了方形大陆板块和楔形大陆板块两种不同的俯冲-碰撞模型,并且俯冲大陆板块侧面与大洋俯冲带相邻.数值模拟结果揭示大洋板块可以持续地俯冲到地幔之中,而大陆板块俯冲到一定深度处,其前端的俯冲板块将发生断离,并进而造成残余的大陆板块俯冲角度的减小.方形大陆俯冲板块的断离深度约为150km,而楔形大陆俯冲板块的断离深度较大,约250~300km,这很大程度上取决于俯冲带中大洋板块的牵引力和大陆板块的负浮力之间的竞争关系.同时,无论方形还是楔形大陆板块俯冲模型中,板块断离后,侧向的大洋俯冲板块仍可以拖曳约60~70km宽的大陆边缘岩石圈持续向下俯冲,揭示了新西兰东部的洋-陆空间转换俯冲带的动力学机制.并且,数值模型与喜马拉雅造山带和秦岭—大别—苏鲁造山带进行了对比,进而对其高压-超高压岩石空间展布沿走向的差异性特征和机制提供了一定的启示.  相似文献   

4.
The Dabieshan and its geological counterpart in the Sulu area represent the eastern part of the Qinling-Dabie orogenic belt in Eastern China. This Orogen corresponds to the collision zone between the North and South China blocks (denoted as NCB and SCB, respectively) during the Early Mesozoic. Since the discovery of ultra-high-pressure (UHP) metamor- phism[1?3], research of the Dabieshan has made great progress from petrological work (e.g. Cong and Wang, 1999 and enclosed references)[…  相似文献   

5.
H. Tabata  S. Maruyama  & Z. Shi 《Island Arc》1998,7(1-2):142-158
The ultrahigh- and high-pressure (UHP–HP) metamorphic belt of the Dabie Mountains, central China, formed by the Triassic continental subduction and collision, is divided into four metamorphic zones; from south to north, the greenschist facies zone, epidote amphibolite to amphibolite facies zone, quartz eclogite zone, and coesite eclogite zone, based on metabasite mineral assemblages. Most of the coesite-bearing eclogites consist mainly of garnet and omphacite with homogeneous compositions and have partially undergone hydration reactions to form clinopyroxene + plagioclase + calcic amphibole symplectites during amphibolite facies overprinting. However, the least altered eclogites sometimes contain garnet and omphacite that preserve compositional zoning patterns which may have originated during their growth at peak temperature conditions of ∼ 750 °C, suggesting a short duration of UHP metamorphic conditions and/or consequent rapid cooling during exhumation. Systematic investigation on peak metamorphic temperatures of coesite eclogite have revealed that, contrary to the general trend of metamorphic grade in the southern Dabie unit, the coesite eclogite zone shows rather flat thermal structure (T = 600 ± 50 °C) with the highest temperature reaching up to 850 °C and no northward increase in metamorphic temperature, which is opposed to the previous interpretations. This feature, along with the preservation of compositional zonation, implies complicated differential movement of each eclogite mass during UHP metamorphism and the return from the deeper subduction zone at mantle depths to the surface.  相似文献   

6.
An introduction to ultrahigh-pressure metamorphism   总被引：6，自引：0，他引：6  
Abstract Ultrahigh-pressure (UHP) metamorphism refers to mineralogical and structural readjustment of supracrustal protoliths and associated mafic-ultramafic rocks at mantle pressures greater than ∼ 25 kbar (80-90 km). Typical products include metapelite, quartzite, marble, granulite, eclogite, paragneiss and orthogneiss; minor mafic and ultramafic rocks occur as eclogitic-ultramafic layers or blocks of various dimensions within the supracrustal rocks. For appropriate bulk compositions, metamorphism at great depths produces coesite, microdiamond and other characteristic UHP minerals with unusual compositions. Thus far, at least seven coesite-bearing eclogitic terranes and three diamond-bearing UHP regions have been documented. All lie within major continental collision belts in Eurasia, have similar supracrustal protoliths and metamorphic assemblages, occur in long, discontinuous belts that may extend several hundred kilometers or more, and typically are associated with contemporaneous high-P blueschist belts. This paper defines the P-T regimes of UHP metamorphism and describes mineralogical, petrological and tectonic characteristics for a few representative UHP terranes including the western gneiss region of Norway, the Dora Maira massif of the western Alps, the Dabie Mountains and the Su-Lu region of east-central China, and the Kokchetav massif of the former USSR. Prograde P-T paths for coesite-bearing eclogites require abnormally low geothermal gradients (approximately 7°C/km) that can be accomplished only by subduction of cold, oceanic crust-capped lithosphere ± pelagic sediments or an old, cold continent. The preservation of coesite inclusions in garnet, zircon, omphacite, kyanite and epidote, and microdiamond inclusions in garnet and zircon during exhumation of an UHP terrane requires either an extraordinarily fast rate of denudation (up to 10 cm/year) or continuous refrigeration in an extensional regime (retreating subduction zone).  相似文献   

7.
A detailed tectonic analysis demonstrates that the present observed regional tectonic configuration of the ultrahigh-pressure metamorphic terrane in the Dabie massif was mainly formed by the extension processes of the post-Indosinian continent-continent oblique collision between the Sino-Korean and Yangtze cratons and ultrahigh-pressure metamorphism (UHPM). The configuration is characterized by a regional tectonic pattern similar to metamorphic core complexes and by the development of multi-layered detachment zones. On the basis of the identification of compressional and extensional fabrics, it is indicated that the exhumation and uplift of ultrahigh-pressure (UHP) metamorphic rocks from the mantle depth to the surface can be divided into at least three different decompression retrogressive metamorphism and tectonic deformation stages, in which the subhorizontal crustal-scale extensional flow in the middle-lower crust under amphibolite facies conditions is an important geodynamic process in the exhumation of UHP metamorphic rocks. Moreover, the extensional flow is probably driven by delamination and magmatic underplating of thickened lithospheric mantle following the continental oblique collision.  相似文献   

8.
The Qinling–Dabie–Sulu orogenic belt in east-central China is the largest high and ultrahigh pressure (HP and UHP) metamorphic zone in the world. The Dabie Mountains are the central segment of this orogenic belt between the North China and Yangtze cratons. This work studies the nature of the crustal structure beneath the Dabie orogenic belt to better understand the orogeny. To do that, we apply ambient noise tomography to the Dabie orogenic belt using ambient noise data from 40 stations of the China National Seismic Network (CNSN) between January 2008 and December 2009. We retrieve high signal noise ratio (SNR) Rayleigh waves by cross-correlating ambient noise data between most of the station pairs and then extract phase velocity dispersion measurements from those cross-correlations using a spectral method. Taking those dispersion measurements, we obtain high-resolution phase velocity maps at 8–35 second periods. By inverting Rayleigh wave phase velocity maps, we construct a high-resolution 3D shear velocity model of the crust in the Dabie orogenic belt.The resulting 3D model reveals interesting crustal features related to the orogeny. High shear wave velocities are imaged beneath the HP/UHP metaphoric zones at depths shallower than 9 km, suggesting that HP/UHP metaphoric rocks are primarily concentrated in the upper crust. Underlying the high velocity HP/UHP metamorphic zones, low shear velocities are observed in the middle crust, probably representing ductile shear zones and/or brittle fracture zones developed during the exhumation of the HP/UHP metamorphic rocks. Strong high velocities are present beneath the Northern Dabie complex unit in the middle crust, possibly related to cooling and crystallization of intrusive igneous rocks in the middle crust resulting from the post-collisional lithosphere delamination and subsequent magmatism. A north-dipping Moho is revealed in the eastern Dabie with the deepest Moho appearing beneath the Northern Dabie complex unit, consistent with the model of Triassic northward subduction of the Yangtze Craton beneath the North China Craton.  相似文献   

9.
Cong  Bolin  Wang  Qingchen  Zhai  Mingguo  Zhang  Ruyuan  Zhao  Zhongyan Ye  Kai 《Island Arc》1994,3(3):135-150
Abstract Based on petrological, structural, geological and geochronological research, the authors summarize the progress of ultra-high pressure (UHP) metamorphic rock study since 1989 by Chinese geoscientists and foreign geoscientists in the Dabie-Su-Lu region. The authors introduce and discuss a two-stage exhumation process for the UHP metamorphic rocks that have various lithologies; eclogite, ultramafics, jadeitic quartzite, gneiss, schist and marble. The metamorphic history of UHP metamorphic rocks is divided into three stages, that is, the pre-eclogite stage, coesite eclogite stage, and retrograde stage. Prior to UHP metamorphism, the ultramafics had a high temperature environment assemblage of mantle and others had blueschist facies assemblages. The granulite facies assemblages, which have recorded a temperature increase event with decompression, have developed locally in the Weihai basaltic rocks. Isotopic ages show a long range from > 700 Ma to 200 Ma. The diversity in protoliths of UHP metamorphic rocks may be related to the variation of isotopic ages older than 400 Ma. The Sm-Nd dating of ~ 220 Ma could reflect the initial exhumation stage after the peak UHP metamorphism in relation to the collision between the Sino-Korean and Yangtze blocks and subsequent events. Petrological and structural evidence imply a two-stage exhumation process. During the initial exhumation, the UHP metamorphic rocks were sheared and squeezed up in a high P/T regime. In the second exhumation stage the UHP metamorphic rocks were uplifted and eventually exposed with middle crustal rocks.  相似文献   

10.
W. G. Ernst 《Island Arc》1999,8(2):125-153
The Dabie-Sulu belt of east-central China, the Kokchetav Complex of northern Kazakhstan, the Maksyutov Complex of the South Urals, the Dora Maira Massif of the Western Alps, and the Western Gneiss Region of southwestern Norway lie astride intracontinental suture zones. All represent collisional mountain belts. Adjoining Eurasian regions exhibit little or no evidence of a coeval calc-alkaline arc. Each metamorphic complex contains mineralogic and textural relics of the presence or former existence of coesite ± diamond. Other ultrahigh-P, moderate-T metamorphic phases, including K-rich clinopyroxene, Mg-rich garnet, ellenbergerite, lawsonite, Al-rutile, glaucophane, high-Si phengite, and associations such as coesite + dolomite, magnesite + diopside, and talc + kyanite, diopside, jadeite, or phengite also testify to pressures approaching or exceeding 2.8 GPa. Each of the five well-studied Eurasian ultrahigh-pressure complexes consists chiefly of old, cool continental crust. Deep-seated recrystallization took place during the Phanerozoic. Subduction zones constitute the only known plate-tectonic environment where such high-P, low-T conditions exist. A model involving underflow of a salient of continental crust imbedded in oceanic crust-capped lithosphere explains the ultrahigh- pressure metamorphism. Partly exhumed ultrahigh-pressure terranes consist of relatively thin sheets 7 ± 5 km thick. During early stages of plate descent, hydration of relatively anhydrous units occurs, and volatiles are expelled from hydrous rocks. If present, aqueous fluids markedly catalyze reactions. Experimental studies on MORB bulk compositions demonstrate that, for common subduction-zone P–T trajectories, amphibole (the major hydrous phase in metabasaltic rocks) dehydrates at less than ~ 2.0 GPa; accordingly, mafic blueschists and amphibolites expel H2O at great depth and, except for some coarse-grained, dry metagabbros, tend to recrystallize to eclogite. Serpentinized mantle beneath the oceanic crust devolatilizes at comparable pressures. In contrast, phengite and biotite remain stable to pressures exceeding 3.5 GPa in associated quartzofeldspathic rocks. So, under ultrahigh-pressure conditions, the micaceous lithologies that dominate the continental crust fail to evolve significant H2O, and may transform incompletely to eclogitic assemblages. Although hydrous rocks expel volatiles during compaction and shallow burial, very deep underflow of partly hydrated oceanic crust + mantle generates most of the volatile flux along and above a subduction zone prior to continental collision. As large masses of sialic crust enter the convergent plate junction, fluid evolution at deep levels severely diminishes, and both convergence and dehydration terminate. After cessation of ultrahigh-pressure recrystallization, tectonic slices of sialic massifs return to shallow depths along the subduction channel, propelled by buoyancy; collisional sheets that retain ultrahigh-pressure effects lose heat efficiently across both upper (extensional, normal fault) and lower (subduction, reverse fault) tectonic contacts. These sheets ascend to midcrustal levels rapidly at average exhumation rates of 2–12 mm/year. Surviving ultrahigh-pressure relics occur as micro-inclusions encased in dense, strong, impermeable, unreactive mineralogic hosts, and are shielded during return towards conditions characteristic of midcrustal levels. Rehydration attending decompression is incomplete; its limited extent reflects the coarse grain size and relative impermeability of the rocks undergoing retrogression, as well as declining temperature and lack of aqueous fluids.  相似文献   

11.
Piera  Spadea  Massimo  D'Antonio 《Island Arc》2006,15(1):7-25
Abstract The Southern Uralides are a collisional orogen generated in the Late Devonian–Early Carboniferous by the collision of the Magnitogorsk island arc (MA) generated in the Early to Middle Devonian by intra‐oceanic convergence opposite to the continental margin, and the continental margin of the East European craton. A suture zone of the arc to the continental margin, the Main Uralian Fault (MUF), is marked by ophiolites and exhumed high‐pressure–low‐temperature metamorphic rocks of continental origin. The pre‐orogenic events of the Southern Urals and their geodynamic setting are traced by means of fluid‐immobile incompatible trace elements (rare earth elements and high field strength elements) and Sr–Nd–Pb isotope geochemistry of the MA suites, in particular the protoarc suite with boninites and probably ankaramites, and the mature arc comprised of island arc tholeiitic (IAT) suites, transitional IAT to calc‐alkaline (CA), and CA suites. The MA volcanics result in genetically distinct magmatic source components. In particular, depleted normal‐mid‐oceanic ridge basalt‐type mantle sources with various enrichments in a slab‐derived aqueous fluid component are evident. The enriched component is not involved in significant amounts, as testified by the rather radiogenic Nd isotopes and unradiogenic Pb isotopes. Further information on the pre‐orogenic events is provided by the Mindyak Massif metagabbros derived from diverse gabbroic protoliths that were affected by oceanic rodingitization, and subsequently by a high‐temperature (HT) metamorphism related to the development of a metamorphic sole. The HT metamorphism has the same age as the protoarc volcanism, and constrains the initiation of subduction at approximately 410 Ma. Consequently, the maximum timespan between initial intra‐oceanic convergence and final collision is approximately 31 my, a duration consistent with that of present‐day ongoing collisions in the western Pacific. The characteristics of early volcanism and the traces of a metamorphic sole provide useful criteria to attribute most MUF ophiolites to the Tethyan type with a complex pre‐orogenic evolution.  相似文献   

12.
Abstract Ultrahigh-pressure metamorphic (UHPM) rocks of the Kokchetav Massif of Kazakhstan contain metamorphic microdiamond and coesite inclusions inside rigid capsules such as garnet and zircon. Precambrian protoliths of the UHPM rocks were metamorphosed at around 530 Ma, at pressures of about 7 GPa, which suggests that crustal protoliths were subducted to depths of over 200 km. Primary UHPM minerals are poorly preserved due to partial obliteration by subsequent Barrovian overprint during exhumation and later collision events in Caledonian times. We report the results of detailed mapping of the Kokchetav Massif and use structural data to propose intrusion and exhumation mechanisms for the UHPM rocks. Detailed mapping revealed that many subvertical structures in the ultrahigh-pressure–high-pressure (UHP–HP) units were formed due to later folding. The primary structure appears to be subhorizontal and the total thickness of the UHP rocks is estimated at around 2 km. The first order structure is sandwich-like; that is, the UHP–HP units are separated from underlying low-P metamorphic rocks of the Daulet Series and from feebly metamorphosed to unmetamorphosed sedimentary strata on the top by subhorizontal faults. Kinematic indicators show top-to-the-south sense of shear along the top, and top-to-the-north displacement along the bottom boundaries. These shear senses, together with the observed metamorphic gradients, suggest that the thin UHPM sheet was extruded toward the north. We consider wedge extrusion to have been the most effective mechanism for the exhumation of the UHPM rocks.  相似文献   

13.
The present paper examines a kinetic model of the coesite–quartz transition under an elastic field. This model is applied to discuss the possible exhumation path of ultrahigh-pressure (UHP) metamorphic rocks. By incorporating the model of transition kinetics into a three-shelled composite sphere model in linear elasticity, the internal stresses in coesite, quartz, and garnet shells were calculated for given external pressure ( P )–temperature ( T ) paths. The occurrence of rupture provides a constraint on the temperature and the amount of quartz inverted from coesite at the rupture for each P–T path. Comparison of calculated results and the natural occurrence of coesite inclusion from the Dora Maira Massif, containing ∼ 27% quartz at the rupture, enables us to constrain the possible exhumation path and possible transition kinetics. A steep decompression path with slow transition kinetics is most favorable, which is consistent with the estimated P–T path during exhumation for most UHP metamorphic rocks.  相似文献   

14.
High-pressure (HP) and ultrahigh-pressure (UHP) eclogites exposed in collisional orogens are widely regarded to record the history of crustal rocks that were subducted to mantle depths and exhumed back to the surface. Insight into subduction and exhumation processes plays an important role in understanding the nature and evolution of subduction zones, geodynamics and plate tectonics. In contrast to continental-type HP to UHP metamorphic rocks that are dominated by felsic lithology, oceanic-type HP to UHP metamorphic rocks are dominated by mafic eclogites and thus have greater density, and their exhumation needs to overcome large barriers and may involve complicated tectonic processes. The exhumation of HP to UHP rocks is mainly influenced by the internal buoyancy, however, the external tectonic forces (such as channel flow) also act as effective exhumation drivers; in addition, effects of tectonic settings (such as slab rollback and breakoff) should take into account. The HP-UHP metamorphic terrane in Southwestern Tianshan, which mainly comprises of metasediments with interlayered metamafic lenses and blocks, represents a typical accretionary mélange associated with deep subduction of oceanic crust. However, the exhumation mechanisms of these once deeply buried HP-UHP rocks are still under discussion. Based on the field occurrences, petrographic features, peak metamorphic P-T conditions and ages of the eclogites/blueschists and their metasedimentary country rocks, a “sediment-type subduction channel” model is advocated in this study to appraise/decipher the formation and evolution of Southwestern Tianshan HP-UHP metamorphic belt. Poly-cyclic metamorphic eclogites record the multistage burial-exhumation cycling manipulated by convective flow in a channel-like interface between the plates, giving robust evidence for the presence of a subduction channel. In addition, this study summarizes some remaining geotectonic problems and research perspectives concerning the Southwestern Tianshan HP-UHP metamorphic belt.  相似文献   

15.
The subduction channel is defined as a planar to wedge-like area of variable size,internal structure and composition,which forms between the upper and lower plates during slab subduction into the mantle.The materials in the channel may experience complex pressure,temperature,stress and strain evolution,as well as strong fluid and melt activity.A certain amount of these materials may subduct to and later exhume from100 km depth,forming high to ultra-high pressure rocks on the surface as widely discovered in nature.Rock deformation in the channel is strongly assisted by metamorphic fluids activities,which change composition and mechanical properties of rocks and thus affect their subduction and exhumation histories.In this study,we investigate the detailed structure and dynamics of both oceanic and continental subduction channels,by conducting highresolution petrological-thermomechanical numerical simulations taking into account fluid and melt activities.The numerical results demonstrate that subduction channels are composed of a tectonic rock melange formed by crustal rocks detached from the subducting slab and the hydrated mantle rocks scratched from the overriding plate.These rocks may either extrude sub-vertically upward through the mantle wedge to the crust of the upper plate,or exhume along the subduction channel to the surface near the suture zone.Based on our numerical results,we first analyze similarities and differences between oceanic and continental subduction channels.We further compare numerical models with and without fluid and melt activity and demonstrate that this activity results in strong weakening and deformation of overriding lithosphere.Finally,we show that fast convergence of orogens subjected to fluid and melt activity leads to strong deformation of the overriding lithosphere and the topography builds up mainly on the overriding plate.In contrast,slow convergence of such orogens leads to very limited deformation of the overriding lithosphere and the mountain building mainly occurs on the subducting plate.  相似文献   

16.
Ultrahigh-pressure metamorphism and tectonics   总被引：11，自引：0，他引：11  
Abstract Recognition of several ultrahigh-pressure (UHP) metamorphic terranes in continental collision belts has revolutionized the concept of geodynamic processes. In order to facilitate better communication and focus among active investigators, the Task Group III-6 of the International Lithosphere Program'Ultrahigh-Pressure Metamorphism and Geodynamics in Collision-type Orogenic Belts'held the first two day workshop at Stanford University in December, 1994. Petrotectonic settings, mineral paragenesis, geochronoldgy, and geochemical characteristics of UHP rocks from several recognized and suspected UHP terranes were addressed. This special issue presents 11 papers from the more than 50 contributions from the 88 participants representing 15 countries. Many challenging petrotectonic and petrochemical problems remain to be investigated. These include detailed P-T time paths for both the UHP unit and adjacent units, the role of fluids at mantle depths, deep seismic profiles and mechanisms and rate of exhumation of the UHP unit.  相似文献   

17.
Cretaceous episodic growth of the Japanese Islands   总被引：1，自引：0，他引：1  
G. Kimura 《Island Arc》1997,6(1):52-68
Abstract The Japanese Islands formed rapidly in situ along the eastern Asian continental margin in the Cretaceous due to both tectonic and magmatic processes. In the Early Cretaceous, huge oceanic plateaus created by the mid-Panthalassa super plume accreted with the continental margin. This tectonic interaction of oceanic plateau with continental crust is one of the significant tectonic processes responsible for continental growth in subduction zones. In the Japanese Islands, Late Cretaceous-Early Paleogene continental growth is much more episodic and drastic. At this time the continental margin uplifted regionally, and intra-continent collision tectonics took place in the northern part of the Asian continent. The uplifting event appears to have been caused by the subduction of very young oceanic crust (i.e. the Izanagi-Kula Plate) along the continental margin. Magmatism was also very active, and melting of the young oceanic slab appears to have resulted in ubiquitous plutons in the continental margin. Regional uplift of the continental margin and intra-continent collision tectonics promoted erosion of the uplifted area, and a large amount of terrigenous sediment was abruptly supplied to the trench. As a result of the rapid supply of terrigenous detritus, the accretionary complexes (the Hidaka Belt in Hokkaido and the Shimanto Belt in Southwest Japan) grew rapidly in the subduction zone. The rapid growth of the accretionary complexes and the subduction of very young, buoyant oceanic crust caused the extrusion of a high-P/T metamorphic wedge from the deep levels of the subduction zone. Episodic growth of the Late Cretaceous Japanese Islands suggests that subduction of very young oceanic crust and/or ridge subduction are very significant for the formation of new continental crust in subduction zones.  相似文献   

18.
在安徽大别山(东大别)进行的深地震宽角反射/折射探测获得6条二维地壳速度结构剖面. 结果显示，东大别造山带地壳为一高速穹隆构造，在其核部中、下地壳变质岩出露于地表，波速高达5.0km/s；在其翼部，上、中地壳发育速度约6.1km/s的壳内低速层(体). 莫霍面的起伏变化较大，中心部位深达41km左右，周边地区则抬升到32～34km. 在晓天—磨子潭断裂一线下方莫霍面垂向错断，断距约4km. 东大别造山带具有大陆深俯冲-碰撞造山带地壳结构的典型式样. 莫霍面错断与扬子陆块深俯冲有关，错断处表征扬子与华北陆块碰撞缝合的深部位置. 高速穹隆构造可能是两陆块碰撞挤压的产物，穹隆翼部上、中地壳发育的低速滑脱带(面)可能在碰撞期之后的地壳伸展、超高压变质岩从中地壳抬升出露于地表过程中起到重要作用.  相似文献   

19.
Abstract Fifty calc-schists have been systematically collected from the Piemonte zone of the western Italian Alps and examined in terms of petrology, X-ray powder diffractometer (XRD) analysis of carbonaceous materials, and K-Ar ages of white mica separates. The petrological study and XRD analysis of carbonaceous materials have shown that calc-schists have suffered blueschist-facies metamorphism in the subduction zone of the convergent margin between the Apulian (African) continental and Tethyan oceanic plates. The metamorphic sequence is divided into three mineral zones based on increasing metamorphic temperature: chlorite (lower than 300°C), chloritoid, and rutile (higher than 450°C). The chlorite zone has dispersed ages of white mica separates, ranging from 115 to 44 Ma, whereas the rutile zone has a comparatively uniform age distribution from 60 to 40 Ma. The chloritoid zone has an intermediate age variation. The large variation in the chlorite zone is attributed to mixing of variable amounts of detrital mica derived from older high temperature metamorphic rocks in the separates, which have not been completely reset during Alpine metamorphism. The uniform age (average ca 50 Ma) in the rutile zone is the cooling age of blueschist-facies calc-schists, which have been episodically exhumed at the collision event of the European and Apulian continents in the Paleocene-Eocene.  相似文献   

20.

Zircon grains were selected from two types of ultrahigh-pressure (UHP) eclogites, coarse-grained phengite eclogite and fine-grained massive eclogite, in the Yukahe area, the western part of the North Qaidam UHP metamorphic belt. Most zircon grains show typical metamorphic origin with residual cores in some irregular grains and sector, planar or misty internal textures on the cathodoluminescence (CL) images. The contents of REE and HREE of the core parts of grains range from 173 to 1680 μg/g and 170 to 1634 μg/g, respectively, in phengite eclogite, and from 37 to 2640 μg/g and 25.7 to 1824 μg/g, respectively, in massive eclogite. The core parts exhibit HREE-enriched patterns, representing the residual zircons of protolith of the Yukahe eclogite. The contents of REE and HREE of the rim parts and the grains free of residual cores are much lower than those for the core parts. They vary from 13.1 to 89.5 μg/g and 12.5 to 85.7 μg/g, respectively, in phengite eclogite, and from 9.92 to 45.8 μg/g and 9.18 to 43.8 μg/g, respectively, in massive eclogite. Negative Eu anomalies and Th/U ratios decrease from core to rim. Positive Eu anomalies are shown in some grains. These indicate that the presence of garnet and the absence of plagioclase in the peak metamorphic mineral assemblage, and the zircons formed under eclogite facies conditions. LA-ICP-MS zircon U-Pb age data indicate that phengite eclogite and massive eclogite have similar metamorphic age of 436±3Ma and 431±4Ma in the early Paleozoic and magmatic protolith age of 783–793 Ma and 748–759 Ma in the Neo-proterozoic. The weighted mean age of the metamorphic ages (434±2 Ma) may represent the UHP metamorphic age of the Yukahe eclogites. The metamorphic age is well consistent with their direct country rocks of gneisses (431±3 Ma and 432±19 Ma) and coesite-bearing pelitic schist in the Yematan UHP eclogite section (423–440 Ma). These age data together with field observation and lithology, allow us to conclude that the Yukahe eclogites were Neo-proterozoic igneous rocks and may have experienced subduction and UHP metamorphism with continental crust at deep mantle during the early Paleozoic, therefore the metamorphic age of 434±2 Ma of the Yukahe eclogites probably represents the continental deep subduction time in this area.

  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号