共查询到20条相似文献，搜索用时 15 毫秒
1.
Clay-rich fault rocks have long been recognized to host distinctive fabric elements, and fault rock fabric is increasingly thought to play a fundamental role in fault mechanical behaviour in the brittle regime. Although the geometries of fabric elements in fault gouges have been described for almost a century, the genesis and evolution of these elements during shear, and their links to bulk mechanical properties, remain poorly understood. We characterize the development and evolution of fabric elements with increasing shear in a variety of clay-rich experimental gouges over shear strains of <1 to >20 and at normal stresses of 2–150 MPa in the double-direct shear configuration. In addition to SEM observations of experiment products at a variety of shear strains, we quantified clay fabric intensity and the degree of grain size reduction using X-ray Texture Goniometry (XTG) and particle size distribution (PSD) measurements. We also measured P- and S-wave velocities during shear to further probe the evolution of shear fabric and gouge properties. We find that clay fabric elements develop in a systematic manner regardless of the gouge material. Riedel shears in the R1 orientation and boundary-parallel shears are the dominant fabric elements. Riedel shears nucleate at layer margins and propagate into the layer shortly after reaching yield stress. Clay particles rotate into the P-orientation shortly after Riedels propagate through the layer. The Riedel shears are through-going, but are >10× thinner than similar zones observed in coarser granular materials. Our results suggest that the weakness of clay-rich fault gouge may be less a function of anisotropic crystal structure, as has been suggested previously, and more a consequence of very thin shear surfaces permitting deformation in clay-rich materials with minimal dilation or cataclasis. The very thin shear surfaces are a function of the fine grain size of the materials and possibly polymodal PSD's. 相似文献
2.
《Journal of Structural Geology》1987,9(7):819-833
Quartz crystallographic fabric transitions in well-exposed mylonites immediately beneath the Moine Thrust at the Stack of Glencoul (NW Scotland) have been investigated by optical microscopy, X-ray texture goniometry and Orientation Distribution Function analysis. A progressive change is observed from asymmetrical kinked single girdle c-axis fabrics at 0.5 cm beneath the Moine Thrust, through asymmetrical Type I cross-girdle fabrics to symmetrical Type I cross-girdle fabrics at 30 cm beneath the thrust. This c-axis fabric transition is accompanied by a transition from asymmetrical single a-axis maximum fabrics (0.5 cm beneath the thrust) through asymmetrical two maxima fabrics to essentially symmetrical two maxima a-axis fabrics. ODF analysis of these S >L and L - S tectonites indicates that c-axis positions on the ‘leading edge’ of the fabric skeleton are related by a common (a) direction oriented within the XZ plane at a moderate angle to the lineation (X). In contrast, c-axis positions on the peripheral ‘trailing edge’ are related by a positive (r) rhomb pole oriented close to Z; (a) directions lying within this common rhomb plane progressively change through 180° in orientation traced around the c-axis fabric skeleton. Such contrasting ‘single crystal’ rhomb (a) preferred orientations on the ‘leading’ and ‘trailing’ edges of the fabric skeleton are interpreted as indicating localized (grain scale) plane strain and flattening deformation, respectively. They result in tectonites with essentially symmetrical c- and a-axis fabrics which display strongly asymmetrical positive (r) and negative (z) rhomb pole figures. The observed transition in quartz c- and a-axis fabrics is interpreted as indicating an increasing importance of non-coaxial plane-strain deformation as the Moine Thrust is approached. Even immediately (<1 cm) beneath the thrust, however, flow has still significantly departed from bulk simple shear and involved an important (heterogeneous) component of contemporaneous flattening deformation. 相似文献
3.
The progressive development of mylonitic fabrics in a series of Torridonian sandstones and shales has been studied along traverses across the Kishorn Nappe. The fabrics developed have been investigated using the following techniques.
- 1. 1. Optical examination of thin sections.
- 2. 2. Measurements of the anisotropy of magnetic susceptibility.
- 3. 3. X-ray texture goniometry.
4.
西藏阿里札达韧性剪切带特征及其X光岩组分析 总被引：1，自引：0，他引：1
文中简述了西藏阿里札达盆地的地质背景、区域地层和札达韧性剪切带的基本特征。采用X射线衍射法对札达韧性剪切带中的石英、方解石和白云母等三种矿物,进行了X光岩组分析,确定了韧性变形岩石的组构特征、韧性剪切带的属性和变形岩石的应变类型,以及韧性剪切带形成时的温压条件。研究表明,韧性变形岩石均具不对称组构,反映韧性带属于南盘(下盘)俯冲型韧性剪切带,韧性变形是在高温、高压、低应变速率条件下发生的,处于>10km的地壳深度,岩石应变类型以压扁应变为主。 相似文献
5.
This study demonstrates that the bladed texture, which is common in epithermal, low-sulfidation (adularia-sericite) precious metal deposits, can serves as exploration vector towards precious metal mineralization. The paper presents two styles of bladed texture in the Kuklitsa gold deposit (Krumovgrad goldfield, SE Bulgaria) observed at both different altitude and lateral position in respect to regional low-angle detachment fault. The first style has formed as a crackle breccia just above the detachment fault where bladed texture consists of 10–20 vol % pseudorhombic adularia, 90-80 vol % quartz, scarce pyrite, and electrum, which is often observed under optical microscope. The second style is present in steep veins which fill listric faults of sharp tectonic contacts. It is developed at a higher level relative to the detachment fault. Bladed texture there consists of 1–2 vol % pseudorhombic adularia, 99-98 vol % quartz, and scarce both electrum and pyrite. Electrum of the two styles of bladed texture comprises only gold and silver but in different proportions with a higher gold content for the first style: fineness of 765, on average, for the first style vs. fineness of 692 for the second one. In this way, it is found that the adularia abundance correlates positively with the electrum one and negatively with the quartz abundance. The author uses the proportions of adularia, quartz and electrum, the fineness of electrum, and the relative distance to the detachment fault to conclude that the first style of bladed texture has been formed at higher temperature relative to the second style. The author infers that the first style is promising for mineralization of higher grade. Methods used comprise field observations and sampling, optical and electron microscopy, powder X-ray diffraction and electron microprobe analysis.
相似文献6.
H. W. Fairbairn 《Mineralogy and Petrology》1954,4(1-4):75-80
Petrofabric investigation of five crossbedded quartzites shows an essentially isotropic fabric in three cases, and preferred orientation together with parallel texture in the remaining two. Crossbedding is undistorted in all five. Recrystallization by solution and re-deposition could satisfactorily explain the three isotropic fabrics. Low-magnitude shear of short duration, coupled with extremely sensitive response of quartz to deformation, is the preferred explanation for the quartzites showing preferred orientation.At a higher metamorphic level in a sheared granite, stress-sensitive quartz and stress-insensitive feldspar are contrasted and, in view of their analogous crystal structures, the apparent anomaly in deformation behavior is noted.With 2 figures. 相似文献
7.
Quartz fabrics in shear-zone mylonites: Evidence for a major imprint due to late strain increments 总被引：1，自引：0，他引：1
Maurice Brunel 《Tectonophysics》1980,64(3-4)
Geometrical relations between quartz C-axis fabrics, textures, microstructures and macroscopic structural elements (foliation, lineation, folds…) in mylonitic shear zones suggest that the C-axis fabric mostly reflects the late-stage deformation history. Three examples of mylonitic thrust zones are presented: the Eastern Alps, where the direction of shearing inferred from the quartz fabric results from a late deformation oblique to the overall thrusting; the Caledonides nappes and the Himalayan Main Central Thrust zone, where, through a similar reasoning, the fabrics would also reflect late strain increments though the direction of shearing deduced from quartz fabric remains parallel to the overall thrusting direction. Hence, the sense of shear and the shear strain component deduced from the orientation of C-axis girdles relative to the finite strain ellipsoid axes are not simply related nor representative of the entire deformation history. 相似文献
8.
A detailed fabric and microstructural analysis of the granitic mylonites was carried out on the southern side of Bes,parmak Mountain north of Selimiye (Milas). The mylonitic augen gneisses have?a blastomylonitic texture characterized by large retort-shape porphyroclasts or augen of feldspars, around which a more ductile, medium to fine-grained matrix of muscovite, biotite, quartz and feldspar is deflected. Feldspars behave in both plastic and brittle fashion, because size reduction occurs through grain boundary migration and/or subgrain rotation, and also through fracturing. Typical “core-and-mantle” structure, characterized by a large feldspar core surrounded by a mantle of fine recrystallized grains, is very characteristic. The majority of plagioclase twins obey the albite-twin law; however, the association with pericline-law twinning suggests that many of the twins are mechanical. Evidence of strain, such as deformation twins, bent or curved twins, undulatory extinction, deformation bands and kink bands occur characteristically in plagioclase. Myrmekite is ubiquitous at K-feldspar grain boundaries, most notably on the long sides of inequant grains parallel to the S-foliation direction, which invariably face the maximum finite shortening direction. Deformation of quartz in mylonitic augen gneisses commonly results in the development of core-and-mantle structure and “type-4” quartz ribbons of elongated, preferably oriented, newly recrystallized quartz aggregates suggesting a primary dynamic recrystallization. Undulatory extinction, deformation bands and lamellae are the strain-related features associated with quartz porphyroclasts. Micas, especially biotite, undergo internal deformation by bend gliding and kinking. Most of the micas are completely attenuated and aligned such that their (001) planes are subparallel or parallel to the margins of quartz ribbons and define the foliation in the rock. These microstructures of feldspars, quartz and mica in the mylonitic augen gneisses in this part of the southern Menderes Massif are broadly consistent with fabric development under upper-greenschist- to lower-amphibolite-facies conditions, rather than almandine–amphibolite facies, as was previously believed. This supports the previous contention of the authors that the protoliths of augen gneisses are younger granitoids and do not represent an exposed Precambrian Pan-African basement in the Menderes Massif. 相似文献
9.
在过去的二十年里,EBSD (Electron Backscattered Diffraction),即电子背散射衍射测试技术,已广泛应用于韧性组构分析,成为变形运动学、流变学分析的常规手段。该方法主要应用于流变条件下矿物晶轴组构定向性分析,以判定流变剪切指向、对比应变强度、估算变形温度。理论上讲,EBSD法适用于所有矿物的全部晶轴定向的分析测试。然而鉴于天然变形的复杂性,笔者建议EBSD分析应以石英,特别是经历了动态重结晶的石英条带为组构分析的主要对象。长期以来,石英晶轴组构的不对称性被视作独立的剪切指向标志。然而,近年来基于天然变形和一般剪切实验的研究结果表明,塑性流变的剪切指向含义应为多重流变剪切指向标志综合判别比对的结果。尽管在提出之初,石英的轴组构开角被视作独立可靠的变形温度计(Kruhl,1998)。然而限于天然变形的复杂性,特别是对变质与变形阶段的对应、耦合的认识;尽管石英变形滑移系及石英晶轴组构开角可为动力变质温度提供重要的参考,但是石英晶轴组构开角并非独立的变形温度计。 相似文献
10.
湖南郴州枞树板铅锌矿X光组构分析 总被引：1，自引：0，他引：1
作者通过对湖南郴州枞树板铅锌矿围岩及含矿构造带岩石的X光岩组分析,认为在构造变形过程中,原岩粒度越细,对变形的反映越敏感。在相同的变形条件下,较细的变质砂岩石的石英定向组构比较粗的变质砂岩内明显,板岩和粉砂质板岩的定向组构最明显。枞树板地区近EW向褶皱变形组构表现强烈,近SN向褶皱变形组构较弱。矿化热液的蚀变作用破坏了岩石中早期褶皱变形组构,但铅锌矿脉内的石英没有明显的生长组构,说明在矿化和含矿石英脉成生过程中没有明显的张性充填结晶表现,而是一种以交代为主的矿化形式。这与从其它地质地球化学研究取得的关于本 相似文献
11.
12.
The effects of grain size on the analysis of fabrics by X-ray diffraction using both the fabric camera and the texture goniometer are discussed. Simple calculations show the interdependance between the mean grain diameter and the number of crystals which are measured by each instrument. The effects of both grain size and modal composition of the specimen are illustrated by comparative analyses. Both the fabric camera and texture goniometer are well suited to the analysis of specimens in which the mean grain diameter is between approximately 10 and 100 microns. The texture goniometer is more suitable when the grain size is less than this, while the fabric camera is better suited when the grain size is coarser, especially when the specimen is not monomineralic. 相似文献
13.
岩石电子背散射衍射（EBSD）组构分析及应用 总被引：18，自引：1，他引：17
电子背散射衍射（EBSD）技术是现代构造地质学与显微构造分析领域一项崭新的技术,它与现代高分辨率扫描电子显微镜和能谱分析设备结合,可以对块状样品中微米或纳米级尺度的颗粒进行晶体结构分析, 从而使微观结构、微区成分与结晶学数据结合起来,能够更精细地对比研究矿物和岩石显微构造,为岩石显微构造分析开辟了一个全新的领域。分析了EBSD技术的基本原理、系统构成、样品制备和工作程序。介绍了石英组构测量,极细粒物质（微角砾岩）的组构特点,二轴晶矿物（角闪石）的组构、变形机制和金属硫化物组构分析的应用实例,对于应用EBSD系统开展研究存在的一些问题进行了讨论。 相似文献
14.
Syntectonic plutons emplaced in shallow crust often contain intermediate-to low-temperature deformation microstructures but
lack a high-temperature, subsolidus deformation fabric, although the relict magmatic fabric is preserved. The Proterozoic
Vellaturu granite emplaced at the eastern margin of the northern Nallamalai fold belt, south India during the late phase of
regional deformation has a common occurrence of intermediate-to low-temperature deformation fabric, superimposed over magmatic
fabric with an internally complex pattern. But high-T subsolidus deformation microstructure and fabric are absent in this
pluton. The main crystal plastic deformation and fluid enhanced reaction softening was concentrated along the margin of the
granite body. Resulting granite mylonites show Y-maximum c-axis fabric in completely recrystallized quartz ribbonds, dynamic recrystallization of perthites, and myrmekite indicative
of fabric development under intermediate temperature (∼ 500–400°C). The weakly-deformed interior shows myrmekite, feldspar
microfracturing and limited bulging recrystallization of quartz. The abundance of prism subgrain boundaries is indicative
of continuing deformation through low-temperature (∼ 300°C). The relative rates of cooling influenced by advective heat transfer
and deformation of the pluton seem to control the overall subsolidus fabric development. The rapid advective heat transfer
from the interior in the early stages of subsolidus cooling was followed by slow cooling through intermediate temperature
window as a well-developed phyllosilicate rich mylonitic skin around the granite body slowed down conductive heat loss. Low-T
crystal plastic deformation of quartz was effected at a late stage of cooling and deformation of the shallow crustal granite
body emplaced within the greenschist facies Nallamlai rocks. 相似文献
15.
构造地质研究中应用x光岩组方法需注意的几个问题 总被引：12，自引：1，他引：11
本文简述了x光岩组分析的特点和样品的选择,重点阐述了石英组构特征与岩石整体变形及石英矿物粒内变形的关系。在介绍石英x光极图转换成石英光轴图的方法之后,作者运用实例说明了将x光岩组方法与其它显微构造及组构方法(如费氏台岩组测量)结合起来,可获得更多的信息用于构造地质研究。 相似文献
16.
G.S Lister 《Journal of Structural Geology》1981,3(1):67-75
Blacic described a transition from basal 〈a〉 to prism 〈c〉 dislocation glide systems as temperature increased or strain-rate decreased in sequences of experiments involving deformation of single crystals of quartz. In this paper theoretical aspects of competition between these systems during plastic deformation are discussed. It is concluded that the basal-prism mechanism switch should have important consequences for the development of crystallographic fabrics during plastic deformation of quartzite, and the Taylor-Bishop-Hill analysis is used in an attempt to predict expected fabric transitions. 相似文献
17.
石英是一种在地壳上大量分布,有着广泛工业用途和广阔应用前景的矿物。当石英晶体形成演化时,受结晶时环境条件、流体性质、结晶后遭受改造(如变质作用、构造变形和热扰动等)等影响,杂质元素如P、Ti、Ge、Al、B、Be、Ca、Na、K、H、Li等会或多或少存在于石英晶体中,因此在自然界不存在纯SiO2组分的石英。同时,基于石英的微量元素组成,可以反演石英源区和形成演化过程,并用于研究岩石及矿床成因等科学问题。石英晶体内部杂质元素以类质同象替代、气液包裹体、矿物包裹体(不能按尺度分,应该按照状态划分存在形式)3种形式存在。石英中杂质元素的种类、含量、赋存形式,特别是包裹体特征将直接影响石英资源的品质和工业用途。本文还系统地阐述了石英的发光特性、工艺性能以及高纯石英的质量分类与标准和高纯石英原料来源等方面的内容。在本研究中,通过光学显微镜和激光拉曼测试,初步地查明了苏北张锦庄石英砂和广西姑婆山花岗岩石英中流体包裹体的分布和矿物包裹体的种类,这是开展后续研究的基础。高纯石英是优质石英资源经纯化加工得到的高品质石英原材料,可用于石英玻璃、石英坩埚、半导体、高温灯管、光纤、精密光学、微电子和太阳能等高新技术产业中。研究高纯石英原料的评价体系、理想源岩和形成机制有益于持续性地供给高纯石英原料, 极大地提高了石英原料的工业附加值。 相似文献
18.
X射线荧光光谱-电子探针在中酸性火山岩鉴定中的应用 总被引：2，自引：1，他引：1
中酸性火山岩多具斑状结构,基质可见微晶状结构、隐晶状结构、玻璃质结构等,由于基质矿物颗粒多细小,常用的偏光显微镜受放大倍数的限制,很难准确鉴定矿物种属及含量,这类岩石仅依靠偏光显微镜分类命名会存在误差。本文采用X射线荧光光谱(XRF)、电子探针(EMPA)和偏光显微镜下观察相结合的方法,对中酸性火山岩进行鉴定。结果表明:对于基质呈隐晶质、显微晶质的中酸性火山岩,基质特征相似,偏光显微镜下无法确定长石、石英的含量,因此无法对岩石准确命名;再通过XRF进行主量元素分析,并对分析结果进行标准矿物QAPF双三角图解分类、TAS图解分类及李氏火山岩定量分类,对比结果显示三种分类命名方法存在差异;通过电子探针对矿物进行校验显示,QAPF及李氏火山岩定量分类图解与显微镜下鉴定相符,TAS图解与其他分析结果存在一定偏差。因此,对于中酸性火山岩准确命名,应采用多种分析方法相结合的方式,避免测试单一引起的误差。 相似文献
19.
In the present paper the intensity of serration of quartz grain boundary sutures in the Palaeoproterozoic age Malanjkhand
granite (Central India) is quantified using the ruler method of fractal analyses. The northern margin of the granite has proximity
to the Central Indian Suture (CIS) that forms the southernmost part of Central Indian Tectonic Zone (CITZ) along which amalgamation
of the northern and southern Indian shields took place. The fractal dimension (D) of the quartz sutures is calculated in 13
samples collected at varying distance from the CIS. D values are noted to increase in samples towards the CIS. This demonstrates
the influence of the tectonic events along the CIS on fabric development in the Malanjkhand granite. Magmatic fabric defined
by preferentially oriented feldspar laths and high-T solid-state deformation fabrics are observed in areas distant from the
CIS. In contrast, mylonites and low-T fabrics such as bulging quartz grain boundaries occur in proximity to the CIS. It is
inferred that the emplacement and high-T fabric development in the Malanjkhand granite was synchronous with regional accretionary
processes that occurred in the region during the Palaeoproterozoic. Two different possibilities, one involving a single tectonic
event and the other involving multiple tectonic events are discussed to explain the superimposition of low-T over high-T fabric
due to which intensity of quartz grain boundary serration increases towards the CIS. 相似文献
