共查询到16条相似文献,搜索用时 514 毫秒
1.
在地形破碎的黄土丘陵地区,利用航空遥感图像分析沟谷密度、沟谷发育阶段、地貌形态及其与土壤侵蚀强度之间的相关性,收到了良好的效果。研究表明,包括切沟在内的黄土丘陵区的沟谷密度值可高达20 km/km~2以上;黄土冲沟的发育阶段不同,其侵蚀强度也相应变化;切沟发育最活跃和最密集的地段,其侵蚀强度也最大。根据土壤侵蚀总量与侵蚀强度之间的相关,建立了土壤侵蚀模型,并利用遥感图像划分了土壤侵蚀综合类型,从而可用多元回归分析方法求算各侵蚀类型的侵蚀强度,为预测区域侵蚀总量开辟了新的技术途径。 相似文献
2.
3.
本文介绍了黄土丘陵沟壑区土壤侵蚀强度的模糊分析模型的构造原理和方法。利用模糊子集的理论建立了土壤侵蚀强度分级的隶属函数,构造了土壤侵蚀强度计算表,用该表计算得出了土壤侵蚀强度指数,并用模糊相容度的原理对土壤侵蚀强度进行分等定级。用该模型对陕北安塞县的土壤侵蚀进行了试验研究。试验结果表明,该模型的预测精度较高,能客观地反映黄土丘陵沟壑区土壤侵蚀强度的动态变化。 相似文献
4.
5.
6.
基于遥感和GIS的水土流失因子信息提取与分级定标研究--以攀枝花市为例 总被引:12,自引:0,他引:12
以攀枝花市为例,主要选用美国陆地卫星2003年的Landsat-7 ETM+遥感数据、1∶10万地形图,运用ERDAS/IMAG INE遥感图像处理软件及M apG IS软件提取对水土流失影响较大的植被覆盖度、地形坡度、沟谷密度、土地利用类型等因子;根据中华人民共和国行业标准《土壤侵蚀分类分级标准》(SL 190-96),建立攀枝花市水土流失强度面蚀分级指标,为进一步水土流失监测研究提供科学依据。 相似文献
7.
本研究工作是在利用航空遥感信息进行黄土丘陵沟壑区侵蚀环境系列制图的基础上,对黄土侵蚀环境动态变化作了初步分析探讨。通过利用山西省离石县王家沟流域不同时期的航空像片,应用先进的地理信息系统软件ARc/INFO系统编制出了该流域不同时期,不同时段和不同类型的侵蚀环境系列图,包括影响侵蚀因素系列图、土壤侵蚀量分布图,流域沟谷形态变化图,时段侵蚀平均发展速度图以及治理评价图,并在此基础上,利用环境动态分析法分时段分析了流域侵蚀状况变化及其环境的变化。在侵蚀环境的分析中·不仅分析了影响侵蚀的自然因素,还揭示了人为因素对侵蚀的影响。研究结果,为黄土高原小流域水土流失综合治理措施的制定提供了科学依据。 相似文献
8.
黄土丘陵区地形破碎、沟壑纵横,为遥感影象的土地利用自动分类带来了很大困难。仅依靠传统的光谱统计分类方法,难以达到较高的分类精度。本文拟探讨在黄土丘陵区运用大比例尺地形图数据,建立区域数字地貌模型;并在模糊数学理论的指导下,运用数字地貌模型对影象的分层分类结果进行修正和细化。研究表明,此方法能够有效地提高土地利用分类精度和机助制图比例尺。 相似文献
9.
孤山川流域近30年土壤侵蚀时空动态特征分析 总被引:2,自引:0,他引:2
针对区域水土保持效益评价、土壤流失治理的需求,选择黄土高原土壤侵蚀较为严重的孤山川流域为研究区,定量研究了孤山川流域近30a的土壤侵蚀时空变异特征。结果表明,1975~2006年间,研究区土壤侵蚀的变化分两个阶段。第一阶段为1975~1986年,土壤侵蚀强度加剧,侵蚀面积增加了138.13km2,流域东南部增加最多;第二阶段为1986~2006年,全流域土壤侵蚀强度减弱,侵蚀面积减少了163.09km2,1986年和1997年,东部地区减弱趋势更明显。中度以上的土壤侵蚀主要发生在高程1 070~1 300m处,都对应于18°~35°的陡坡地;1975年和2006年,中度以上侵蚀分别集中在900~1 150和1 300~1 800,单位为MJ·mm·hm-2·h-1。流域土壤侵蚀主要发生在耕地和林地。1975~2006年,耕地面积减少,林草地面积增加,土地利用向良性循环发展。可为认识黄土丘陵沟壑区I副区土壤侵蚀规律和该区土壤侵蚀防治宏观决策提供科学支撑。 相似文献
10.
用ANUDEM建立水文地貌关系正确DEM的方法研究 总被引:4,自引:0,他引:4
针对区域尺度的径流、水土流失定量评价和植被适宜性评价等研究工作需要,利用1∶25万数字地形图和ANUDEM软件,对黄土丘陵区中等分辨率水文地貌关系正确DEM建立方法进行了研究。结果表明该方法所建立的DEM,可以正确反映地貌梁、沟结构及其与流水线网络的关系,对地形描述的能力优于TIN方法建立的DEM;利用ANUDEM和1∶25万地形图插值建立黄土丘陵区DEM的三个主要参数分别为分辨率50或100,计算迭代次数40,第二糙率系数0.8。 相似文献
11.
Jilong Li Jiaming Na Xue Yang Jianjun Cao Wen Dai Guoan Tang 《Transactions in GIS》2019,23(1):137-157
The loess shoulder‐lines are known to be the most critical topographic structural lines in the loess landform area of the Loess Plateau, China. Previous studies have shown that gully erosion activity can be reflected in the dynamic changes of the shoulder‐lines. In this study, active gully erosion sites along the shoulder‐lines are investigated. Three typical test areas with different loess landforms are selected, and the loess shoulder‐lines are derived from 1 m resolution digital elevation models. First, height profiles of the loess shoulder‐lines are extracted. Then, from the perspective of frequency domains, active gully erosion sites are identified using the Hilbert–Huang transform (HHT). The experimental results show that the HHT method can effectively mine the intrinsic characteristics of the shoulder‐lines. The detailed information components (non‐components) and trend components of the height profiles can be obtained via ensemble empirical mode decomposition and a significance test. In addition, the HHT method was employed to identify the instantaneous frequency curve catastrophe points of the loess shoulder‐line height profiles, and the physical meaning is clear: a higher frequency denotes greater energy and more severe erosive processes, and the catastrophe point locations represent the active gully erosion sites. Evidence from a recent field survey and a comparison with another method supports the results, indicating that the method proposed in this study could potentially be effective for the exploration and analysis of geomorphologically sensitive locations in loess landform studies. 相似文献
12.
13.
14.
Gully boundary extraction based on multidirectional hill‐shading from high‐resolution DEMs 下载免费PDF全文
The gully boundary, which distinguishes gully from non‐gully areas, is a significant geomorphologic feature for research on gully development and gully erosion. This study presents a new method based on multidirectional hill‐shading maps, which identify the gully (i.e., shadow area) from inter‐gully (i.e., non‐shadow area). These shadows obtained from various illumination azimuths are merged; consequently, the border of the shadows, which is the gully boundary line, can be achieved. In this process, two key parameters, namely, altitude and azimuth of light, affect the accuracy of gully boundary extraction. The experiments in Yaojiawan area of China show that the method of average median slope of all sampling profiles across the gully boundary is effective and practical for light altitude selection. Moreover, the six azimuths are sufficient for gully boundary extraction in a loess hilly area. The application in the Madigou area indicates the replicability and rationality of this method. A comparison with the positive‐negative terrain and slope variation method confirms a higher accuracy of gully boundary extraction by the proposed method in terms of visual interpretation, length, and contour‐matching difference with reference to manually digitalized results. Accuracy assessment indicates that the proposed method is applicable for gully boundary extraction based on high‐resolution DEMs. 相似文献
15.
针对传统沟蚀监测手段劳作强度大,且数据采集的完整性、代表性受切沟复杂地形制约等问题,提出了一种针对植被稀疏地区沟蚀变化的地面激光扫描(terrestrial laser scanning,TLS)监测方法,形成了一套数据处理与侵蚀量计算技术流程。以河北省官厅水库东岸某大型切沟为例,利用高精度TLS进行两年3期野外监测与点云数据分析。通过点云配准、滤波、重采样及曲面拟合等预处理,生成不同采样分辨率下3期切沟表面模型,并提取地形信息;采用杨赤中滤波推估法计算并比较不同点云重采样分辨率下的沟蚀量。结果表明:(1)当点云重采样分辨率与切沟表面凹凸微结构暨石块粒径(2~6cm)接近时,沟蚀量估算值趋于稳定、结果可靠;(2)经侵蚀作用,切沟外壁表面高程整体降低2~20 cm;(3)切沟内壁侵蚀量不均衡,坡度较大处侵蚀最为显著。 相似文献
16.
遥感与GIS支持下的土壤侵蚀强度快速评价方法研究 总被引:2,自引:0,他引:2
以TM影像、1︰1万数字地形图以及其它辅助数据为基础,以土地利用类型、植被覆盖度以及坡度等作为影响因子,在遥感
和GIS技术的支持下,对余江县洪湖乡的土壤侵蚀强度进行了快速分级评价实验。结果表明,该方法所获取的土壤侵蚀强度信息与
实际情况比较吻合。 相似文献