共查询到20条相似文献，搜索用时 46 毫秒
1.
DEFORMATION OF THE BRITTLE-PLASTIC TRANSITION ZONE AT THE POST-SEISMIC RELAXATION PERIOD: A CASE STUDY OF THE RED RIVER FAULT 
下载免费PDF全文
下载免费PDF全文 The transition from microscopic brittle deformation to microscopic plastic deformation is called brittle-plastic transition, which is considered as a key layer for determining the limit of lower continental crust seismicity. The depth and deformation mechanism of the brittle-plastic transition zone is controlled mainly by temperature. Besides, the strain rate and fluid pore pressure also affect the transition during the different deformation stages at the seismic cycle.
In this paper, microstructure observation of catalcastic samples collected from the Red River Fault was carried out using optical polarized microscopy and scanning electron microscopy. The morphology, microstructures of deformation characteristics, mineral composition, water-rock reaction, pressure solution, exsolution, crack healing in the samples were systematically observed. The mineral components quantitative analyses were examined using the EDS. Water-rock reaction and pressure solution were systematically observed under SEM. The fabric of the main minerals in the samples was measured using electron backscattered diffraction(EBSD). Based on these analyses, the deformation mode was setup for the brittle-plastic transition zone of the fault during the post-seismic relaxation period.
Both brittle deformation and plastic deformation were developed in the cataclastic samples. EBSD data shows that the c axial fabrics of quartz present low-temperature plastic deformation characteristics. The feldspar deformed as cataclastic rock, and the micro-fracture in feldspar was healed by static recrystallized quartz and calcite veins. The calcite vein underwent plastic deformation, which represents the post-seismic relaxation deformation.
Based on the analysis of deformation mechanism of cataclastic samples in brittle-plastic transition zone of the Red River Fault, and combined with previous studies, we concluded that the brittle fracture and fracture healing is the main deformation mode at brittle-plastic transition zone in the post-seismic relaxation. High stress and high strain rate at post-seismic relaxation lead to brittle fracture of high-strength minerals such as feldspar in rocks. Plastic deformation occurs in low-strength minerals such as quartz and mica. Under the fluid condition, micro-fractures were healed by quartz and calcite. The minerals such as quartz and calcite in the fracture transformed from static recrystallization to dynamic recrystallization with stress gradually accumulating. With fracture healing and stress accumulation, the fault strength gradually increases which could accumulate energy for the next earthquake. 相似文献
2.
THE GEOLOGICAL AND ROCK MECHANICAL DISTINCTION EVIDENCE BETWEEN STICK-SLIP AND CREEP IN HOST ROCK SEGMENTS OF FAULT 下载免费PDF全文
下载免费PDF全文 ZHOU Yong-sheng 《地震地质》2019,41(5):1266-1272
Paleo-seismic and fault activity are hard to distinguish in host rock areas compared with soft sedimentary segments of fault. However, fault frictional experiments could obtain the conditions of stable and unstable slide, as well as the microstructures of fault gouge, which offer some identification marks between stick-slip and creep of fault.
We summarized geological and rock mechanical distinction evidence between stick-slip and creep in host rock segments of fault, and analyzed the physical mechanisms which controlled the behavior of stick-slip and creep. The chemical composition of fault gouge is most important to control stick-slip and creep. Gouge composed by weak minerals, such as clay mineral, has velocity weakening behavior, which causes stable slide of fault. Gouge with rock-forming minerals, such as calcite, quartz, feldspar, pyroxene, has stick-slip behavior under condition of focal depth. To the gouge with same chemical composition, the deformation mechanism controls the frictional slip. It is essential condition to stick slip for brittle fracture companied by dilatation, but creep is controlled by compaction and cataclasis as well as ductile shear with foliation and small fold. However, under fluid conditions, pressure solution which healed the fractures and caused strength recovery of fault, is the original reason of unstable slide, and also resulted in locking of fault with high pore pressure in core of fault zone. Contrast with that, rock-forming minerals altered to phyllosilicates in the gouges by fluid flow through degenerative reaction and hydrolysis reaction, which produced low friction fault and transformations to creep. The creep process progressively developed several wide shear zones including of R, Y, T, P shear plane that comprise gouge zones embedded into wide damage zones, which caused small earthquake distributed along wide fault zones with focal mechanism covered by normal fault, strike-slip fault and reverse fault. However, the stick-slip produced mirror-like slide surfaces with very narrow gouges along R shear plane and Y shear plane, which caused small earthquake distributed along narrow fault zones with single kind of focal mechanism. 相似文献
3.
Field studies and seismic data show that semi-brittle flow of fault rocks probably is the dominant deformation mechanism at the base of the seismogenic zone at the so-called frictional-plastic transition. As the bottom of seismogenic fault, the dynamic characteristics of the frictional-plastic transition zone and plastic zone are very important for the seismogenic fault during seismic cycles. Granite is the major composition of the crust in the brittle-plastic transition zone. Compared to calcite, quartz, plagioclase, pyroxene and olivine, the rheologic data of K-feldspar is scarce. Previous deformation studies of granite performed on a quartz-plagioclase aggregate revealed that the deformation strength of granite was similar with quartz. In the brittle-plastic transition zone, the deformation characteristics of granite are very complex, temperature of brittle-plastic transition of quartz is much lower than that of feldspar under both natural deformation condition and lab deformation condition. In the mylonite deformed under the middle crust deformation condition, quartz grains are elongated or fine-grained via dislocation creep, dynamic recrystallization and superplastic flow, plagioclase grains are fine-grained by bugling recrystallization, K-feldspar are fine-grained by micro-fractures. Recently, both field and experimental studies presented that the strength of K-feldspar is much higher than that of quartz and plagioclase. The same deformation mechanism of K-feldspar and plagioclase occurred under different temperature and pressure conditions, these conditions of K-feldspar are higher than plagioclase. The strength of granite is similar to feldspar while it contains a high content of K-feldspar. High shear strain experiment studies reveal that granite is deformed by local ductile shear zones in the brittle-plastic transition zone. In the ductile shear zone, K-feldspar is brittle fractured, plagioclase are bugling and sub-grain rotation re-crystallized, and quartz grains are plastic elongated. These local shear zones are altered to local slip-zones with strain increasing. Abundances of K-feldspar, plagioclase and mica are higher in the slip-zones than that in other portions of the samples (K-feldspar is the highest), and abundance of quartz is decreased. Amorphous material is easily formed by shear strain acting on brittle fine-grained K-feldspar and re-crystallized mica and plagioclase. Ductile shear zone is the major deformation mechanism of fault zones in the brittle-plastic transition zone. There is a model of a fault failed by bearing constant shear strain in the transition zone:local shear zones are formed along the fractured K-feldspar grains; plagioclase and quartz are fine-grained by recrystallization, K-feldspar is crushed into fine grains, these small grains and mica grains partially change to amorphous material, local slip-zones are generated by these small grains and the amorphous materials; then, the fault should be failed via two ways, 1)the local slip-zones contact to a throughout slip-zone in the center of the fault zone, the fault is failed along this slip-zone, and 2)the local slip-zones lead to bigger mineral grains that are in contact with each other, stress is concentrated between these big grains, the fault is failed by these big grains that are fractured. Thus, the real deformation character of the granite can't be revealed by studies performing on a quartz-plagioclase aggregate. This paper reports the different deformation characters between K-feldspar, plagioclase and quartz under the same pressure and temperature condition based on previous studies. Then, we discuss a mode of instability of a fault zone in the brittle-plastic transition zone. It is still unclear that how many contents of weak mineral phase(or strong mineral phase)will control the strength of a three-mineral-phase granite. Rheological character of K-feldspar is very important for study of the deformation characteristic of the granitic rocks. 相似文献
4.
Shear zones in outcrops and core drillings on active faults commonly reveal two scales of localization, with centimeter to tens of meters thick deformation zones embedding much narrower zones of mm-scale to cm-scale. The narrow zones are often attributed to some form of fast instability such as earthquakes or slow slip events. Surprisingly, the double localisation phenomenon seem to be independent of the mode of failure, as it is observed in brittle cataclastic fault zones as well as ductile mylonitic shear zones. In both, a very thin layer of chemically altered, ultra fine grained ultracataclasite or ultramylonite is noted. We present an extension to the classical solid mechanical theory where both length scales emerge as part of the same evolutionary process of shearing the host rock. We highlight the important role of any type of solid-fluid phase transitions that govern the second degree localisation process in the core of the shear zone. In both brittle and ductile shear zones, chemistry stops the localisation process caused by a multiphysics feedback loop leading to an unstable slip. The microstructural evolutionary processes govern the time-scale of the transition between slow background shear and fast, intermittent instabilities in the fault zone core. The fast cataclastic fragmentation processes are limiting the rates of forming the ultracataclasites in the brittle domain, while the slow dynamic recrystallisation prolongs the transition to ultramylonites into a slow slip instability in the ductile realm. 相似文献
5.
NI JinLong LIU JunLai TANG XiaoLing ZHAO ChunQiang & ZENG QingDong 《中国科学:地球科学(英文版)》2014,57(4):600-613
The combination of field surveys with analysis of microstructure of tectonite and Electron Backscatter Diffraction (EBSD) on quartz fabric indicated that three periods of ductile shear events developed in the Paishanlou gold deposits and the E-W and NE-striking ductile shear zones were formed during each event. The E-W-striking ductile shear zone, accompanied by compressional and dextral shear slip, was shear-cut by the NE-striking shear zones, accompanied by compressional-sinistral shear slip and sinistral-normal shear slip, successively. An E-W-striking ductile shear zone developed at a deeper tectonic level and at middle- to high-temperatures, accompanied by abundant microstructures, including microlayering between a polycrystal quartz belt and mica, and quartz deformation was depended on cylinder (10-10) 〈a〉 or 〈c〉 glide. The development of an E-W-striking shear zone can be seen as a tectonic pattern in the region of the Paishanlou gold deposits of the collision between the Mongolian tectonic belt and the North Archean Craton from Suolun to the Linxi suture zone during the Indosinian. The NE-striking ductile shear zone developed approximately 160 Ma during the early Yianshanian at middle to shallow tectonic levels and at middle- to low-temperatures, accompanied by typical microstructures, including polycrystal quartz aggregation and quartz subgrain rotation recrystallization, etc., and quartz deformation was depended on prismatic (1011) 〈a〉 glide. The last ductile shear event around the NE-striking shear zone developed at low temperatures and shallow tectonic levels, yielding to a pre-existing NE-striking shear zone, accompanied by abundant microstructures, including low-temperature quartz grain boundary migration and bulging recrystallization. The last ductile shear movement may be related to lithosphere thinning and the destruction of the North China Craton from approximately 130-120 Ma, and this shear event resulted directly in the mineralization in the Paishanlou region. 相似文献
6.
岩石脆延性转化 (brittle ductiletransition)和脆塑性转化 (brittle plastictransition)是不同的概念。脆延性转化指从岩石的局部变形破坏到宏观均匀流动变形的转化 ,它与宏观结构和力学行为的变化相关。脆塑性转化指脆性向晶体塑性变形的转化 ,它与力学行为和微观机制的变化相关。通过地壳中最主要的石英、长石的实验室和野外变形温压条件对比发现 ,达到相同的变形特征 ,在实验室和野外所需温压条件不同。建立变形机制图使解决这一矛盾成为可能。但受实验资料的限制 ,目前几种主要岩石的变形机制图还无法建立。因此 ,通过对实验与自然环境下变形特征及微观机制对比 ,找出两者温压条件的差别 ,就成为将实验研究结果外推解决实际地质问题的有效途径 相似文献
7.
8.
Abstract Meso- and microscale structural analyses were carried out in the Hatagawa shear zone, north-eastern Japan. The shear zone is a sinistral strike–slip ductile shear zone, and has a 1-km wide north-south trending region where quartz mean grain size of approximately 35 μm does not vary significantly. Two types of quartz microstructures, A and B, occur in the western and eastern part of the shear zone, respectively. The lattice preferred orientation (LPO) patterns are characterized by a type I crossed girdle in the samples with the quartz microstructure A, and a Y maximum in the samples with the quartz microstructure B. The microstructures under optical and transmission electron microscopes indicates that the quartz recrystallization occurred predominantly by progressive subgrain rotation in microstructure A, and by both progressive subgrain rotation and grain boundary migration in microstructure B. This suggests different deformation conditions in the western and eastern parts of the shear zone. Quartz LPO patterns, presence of myrmekite, feldspar compositions, and dislocation density also suggest difference in the deformation conditions. The syn-deformation temperature in the western part of the shear zone was lower than that of the eastern part of the shear zone. The stress in the western part of the shear zone was higher than that of the eastern part of the shear zone. The difference in the deformation conditions would affect not only the quartz microstructure, but also the quartz LPO patterns and the presence of myrmekite around K-feldspar porphyroclasts. 相似文献
9.
Water contents and deformation mechanism in ductile shear zone of middle crust along the Red River fault in southwestern China 总被引：1，自引：0，他引：1
Using Fourier transform infrared spectroscopy (FTIR), we measured water contents of quartz and feldspar for four thin sections of felsic mylonite and two thin sections of banded granitic gneiss col- lected from a ductile shear zone of middle crust along the Red Rivers-Ailaoshan active fault. The ab- sorbance spectra and peak position suggest that water in quartz and feldspar of granitic gneiss and felsic mylonite occurs mainly as hydroxyl in crystal defect, but also contains inclusion water and grain boundary water. The water contents of minerals were calculated based on the absorbance spectra. Water content of feldspar in granitic gneiss is 0.05 wt%-0.15 wt%, and that of quartz 0.03 wt%-0.09 wt%. Water content of feldspar ribbon and quartz ribbon in felsic mylonite is 0.095 wt%-0.32 wt%, and those of fine-grained feldspar and quartz are 0.004 wt%-0.052 wt%. These data show that the water content of weakly deformed feldspar and quartz ribbons is much higher than that of strongly deformed fine-grained feldspar and quartz. This suggests that strong shear deformation leads to breakage of the structures of constitutional water, inclusion and grain boundary water in feldspar and quartz, and most of water in minerals of mylonite is released to the upper layer in the crust. 相似文献
10.
11.
在对郯庐断裂带南段３条韧性剪切带中糜棱岩及围岩进行矿物组合、结构构造观察研究的基础上,对长石矿物进行了多项分析测试,发现长石成分及其结构状态参数的变化与构造应力场的构造作用存在明显的对应关系：随剪切变形作用的加强,长石矿物的结构状态参数呈增大趋势,矿物单位晶胞的体积和斜长石中Ｓｉ／Ａｌ比值随之减小;长石的变形指数（Ｉｓｓ）和斜长石中的钙长石分子（Ａｎ）与岩石的变形强度呈明显的正相关关系。这些研究结果为探讨构造变形场中矿物岩石的变形 变质作用提供了一种简捷有效的手段 相似文献
12.
Xuemei Cheng Shuyun Cao Junyu Li Zunpu Yu Yanlong Dong Meixia Lv Junlai Liu 《中国科学:地球科学(英文版)》2018,61(8):1023-1041
Diancangshan metamorphic massif is one of the four metamorphic massifs developed along the Ailaoshan-Red River strike-slip fault zone, Yunnan, China. It has experienced multi-stage metamorphism and deformation, especially since the late Oligocene it widely suffered high-temperature ductile shear deformation and exhumation of the metamorphic rocks from the deep crust to the shallow surface. Based on the previous research and geological field work, this paper presents a detailed study on deformation and metamorphism, and exhumation of deep metamorphic rocks within the Diancangshan metamorphic massif, especially focusing on the low-temperature overprinted retrogression metamorphism and deformation of mylonitic rocks. With the combinated experimental techniques of optical microscope, electron backscatter diffraction attachmented on field-emission scanning electron microscopy and cathodoluminescence, our contribution reports the microstructure, lattice preferred orientations of the deformed minerals, and the changes of mineral composition phases of the superposition low-temperature retrograde mylonites. All these results indicate that: (1) Diancangshan deep metamorphic rock has experienced early high-temperature left-lateral shear deformation and late extension with rapid exhumation, the low-temperature retrogression metamorphism and deformation overprinted the high-temperature metamorphism, and the high-temperature microstructure and texture are in part or entirely altered by subsequent low-temperature shearing; (2) the superposition of low-temperature deformation-metamorphism occurs at the ductile-brittle transition; and (3) the fluid is quite active during the syn-tectonic shearing overprinted low-temperature deformation and metamorphism. The dynamic recrystallization and/or fractures to micro-fractures result in the strongly fine-grained of the main minerals, and present strain localization in micro-domians, such as micro-shear zones in the mylonites. It is often accompanied by the decrease of rock strength and finally influences the rheology of the whole rock during further deformation and exhumation of the Diancangshan massif. 相似文献
13.
The Bloody Bluff fault zone, which divides the New England Avalon zone and Nashoba zone, contains at least two shear zones that are within Avalonian rocks. The Rice Road shear zone (sinistral, strike-slip) affects the Westboro Formation and is intruded by the 630 Ma Dedham Granite. The Rice Road shear zone, and equivalent pre-granite mylonites appearing in drill cores, parallel the terrane boundary, and may have controlled the later mylonitization. The Nobscot shear zone (dextral, strike-slip) is a prograde shear zone cutting a granite assumed to be related to the surrounding 630 Ma plutons. Similar shear zones have been seen cutting Late Proterozoic plutons in the New England Avalon zone, and represent a series of en echelon strike-slip shears. The Burlington mylonite zone (shear sense equivocal) is part of the terrane boundary. This is a retrograde shear zone that forms the southeastern border of the Wolfpen lens, a lenticular body of sheared and altered metamorphic and intrusive rock that has been assumed to be part of the New England Avalon zone. Microstructural characteristics indicate that the Burlington mylonite zone was active after the Nobscot shear zone. In particular, quartz in the Nobscot shear zone was dynamically recrystallized by a combination of grain boundary migration and rotation recrystallization processes, thought to occur during shearing at upper-greenschist conditions. In contrast, quartz in the Burlington mylonite zone was recrystallized predominantly by rotation recrystallization, indicating lower-greenschist, retrograde, deformation. The two shear zones are too close for these differences to be a result of a simple thermal field gradient.While mineral assemblages in most of the study area indicate no metamorphic grade higher than upper-greenschist temperatures, the Wolfpen lens contains amphibolites with assemblages formed at temperatures above the oligoclase isograd, indicating mid-amphibolite facies metamorphism. As metamorphic contrast is one of the key features differentiating the Nashoba zone from the New England Avalon zone, the Wolfpen lens cannot be assumed to be part of Avalon. It may be a small block of rocks of intermediate grade between the two terranes. 相似文献
14.
R. M. Stesky 《Pure and Applied Geophysics》1978,116(4-5):690-704
This paper reviews many of the mechanical properties of faulted and jointed rock under pressure and temperature and in the presence of water. At low effective confining pressures (below about 1 kilobar), the friction strength is quite variable and depends on the frictional resistance between gouge particles or asperities and on the dilatancy of the fault. At higher pressures the friction strength is nearly independent of mineralogy, temperature, and rate, at least for rocks whose friction strength is less than the failure strength. Water tends to slightly weaken the fault. The type of sliding motion, whether stick-slip or stable sliding, is much more affected by environmental and mineralogical factors. In general, stick-slip is dominant at high pressures and low temperatures, in the presence of strong minerals such as quartz and feldspar, in the absence of gouge, for lower surface roughness, and perhaps in the presence of water. The microscopic deformation mechanisms are poorly understood. At low temperatures, cataclasis dominates in rocks containing mostly quartz or feldspar, and plastic deformation in rocks containing mostly calcite or platy silicates. At high temperature most minerals deform plastically, producing a greater temperature-and rate-dependence of the friction strength. Glass has been found in some sliding surfaces in sandstone. 相似文献
15.
龙马溪组页岩是目前国内页岩气勘探的主要层位之一,其静态弹性性质是影响压裂效果的重要因素,而动态弹性性质则是页岩"甜点"地震预测的重要基础.但对龙马溪组页岩动、静态弹性特征相互关系及其影响因素缺少对比研究,致使运用动态弹性性质进行"甜点"预测时存在不确定性.在对龙马溪组页岩样品系统动、静态性质联合测量基础上,分析了页岩样品动、静态弹性性质的变化规律,并讨论了成岩作用与动、静态弹性性质变化规律的因果关系.研究结果表明,龙马溪组页岩上下两段成岩过程存在明显差异,致使上段页岩在结构上表现为以塑性黏土颗粒作为受力骨架,而下段页岩在结构上逐渐转变为脆性石英颗粒作为受力骨架.页岩岩石结构特征的变化控制了动、静态弹性特征的整体变化规律,表现为动、静态杨氏模量、峰值强度等随石英含量的增大表现出近似"V"型的变化形式,而与钙质含量变化呈现正相关关系,与黏土含量变化表现出负相关性.上段页岩宏观力学性质受微观石英+黏土颗粒集合体弹性性质控制,应力应变曲线表现出明显塑性段,动、静态杨氏模量比大于1.4,破裂易于发生在黏土与石英颗粒边界形成宏观单剪型破裂模式,样品脆性低,且脆性变化不受石英含量的影响.下段页岩宏观力学性质受微观石英颗粒集合体弹性性质控制,应力应变曲线表现为弹性变形,动、静态杨氏模量比小于1.4,破裂发生在石英颗粒内部形成宏观劈裂型破裂模式,样品脆性高,且脆性变化与石英含量呈明显正相关关系.研究结果可为龙马溪页气储层的测井解释和地震"甜点"预测提供依据. 相似文献
16.
Abstract Mylonites along the Median Tectonic Line, southwest Japan commonly contain shear bands comprising S(-C)-Ss fabrics. This paper stresses the lithologic control on the orientation, dimension and development of shear bands by comparing the microstructure of the shear bands in different rock types (P mylonites, F mylonites, micaceous phyllonite and quartzose phyllonite). There is no significant change of the α angles (average 21–24°) between Ss and S toward the centre of the shear zone (viz. increasing the intensity of mylonitization) and it is different from the S-C relationship in a narrow sense.
The generation of the composite planar fabric can be classified into four different strain partitioning models: S only type without any slip surface (model A); S-C type (model B); S-Ss type with Ss-slip precedence (model C), and S-Ss type with S-slip precedence (model D). Model C is proposed in this paper and is similar to the model for the generation of Riedel shears in brittle shear zones. An unstable slip between porphyroclasts and the matrix during ductile flow can easily initiate shear bands. Formation of a composite planar fabric is initiated according to model A, followed by model C in conditions of increasing strain, and then model D when the angle between S and the shear zone boundary becomes small enough (α/2 = 10°) to produce S-slip. Thus the generation of the shear bands probably begins in the early stages of shear deformation and continues until the latest stages. 相似文献
The generation of the composite planar fabric can be classified into four different strain partitioning models: S only type without any slip surface (model A); S-C type (model B); S-Ss type with Ss-slip precedence (model C), and S-Ss type with S-slip precedence (model D). Model C is proposed in this paper and is similar to the model for the generation of Riedel shears in brittle shear zones. An unstable slip between porphyroclasts and the matrix during ductile flow can easily initiate shear bands. Formation of a composite planar fabric is initiated according to model A, followed by model C in conditions of increasing strain, and then model D when the angle between S and the shear zone boundary becomes small enough (α/2 = 10°) to produce S-slip. Thus the generation of the shear bands probably begins in the early stages of shear deformation and continues until the latest stages. 相似文献
17.
大量研究表明,流体在断层弱化中起着非常重要的作用.在地壳浅部脆性域,自由水通过流体孔隙压力减小断层有效正压力,从而降低断层摩擦强度;在地壳深部,矿物中的微量结构水弱化岩石流变强度.另外,流体-岩石相互作用等化学过程,如长石水解反应,对断层强度的影响也非常显著.断层深部流体通过物理作用与化学作用影响着岩石的变形机制,从而影响断层力学性质与地震孕育和发生.断层内部流体孔隙压力周期性变化是断层带脆-塑性转化、裂缝张开与愈合等的直接体现,这种变化控制着断层强度与强震周期性发生现象. 相似文献
18.
A number of lode–gold occurrences are hosted by hydrothermally altered greenstones along the southern boundary of the Palaeoproterozoic Central Lapland Greenstone Belt. The hydrothermally altered and mineralised zones are related to a major thrust and shear zone system that extends much across northern Finland. Spatial correlation between mineralized zones, brittle structural features and chemical alteration was explored and identified from high-resolution aeromagnetic data, in combination with airborne electromagnetic and gamma-ray spectrometric data and coupled with petrophysical and palaeomagnetic studies. The most prominent magnetic, ductile signatures formed during the Svecofennian Orogeny (1900–1800 Ma), resulting in elastic, curved, continuous magnetic patterns. These elastic anomaly patterns were disturbed by tectonic stress from S–SW, resulting in parallel, regularly oriented fracture families and thrust faults normal to the main stress direction. According to aeromagnetic, palaeomagnetic and structural evidence, the thrust zone was active during the latest stage of the orogenic event, but was also reactivated at a later date. Airborne gamma-ray data reveals zones of potassic alteration in the ultramafic rock units in the vicinity of cross-sections of these two fault sets. Chemical and mineralogical changes during alteration and metamorphism strongly affected the mafic and ultramafic host rocks throughout the deformation zone. The strong potassium enrichment and coinciding destruction of magnetic minerals resulted in enhanced potassium concentration and reduction of magnetic anomaly amplitudes. Palaeomagnetic results indicate that the remanent magnetization for the altered ultramafic rocks along the thrust zone is of chemical origin (CRM) and was acquired at 1880–1840 Ma, which is presumed also to be the age of the chemical alteration related to gold mineralization. 相似文献
19.
OM (optical microscope)/TEM (transmission electron microscope) micro- and submicrostructural analysis of hornblende rocks sheared at high temperatures from the Diancangshan area, western Yunnan reveals evidence for deformation in the brittle-ductile transition of hornblende at middle crustal level (about 637℃ and 0.653 GPa) and mechanisms of deformation in the transitional regime are further discussed. Sheared hornblende rocks at middle crustal level have typical mylonitic microstructures, shown by coarse porphyroclasts and fine matrix grains. Different mineral phases in the rocks show distinct deformation characteristics. Hornblende and feldspar grains are intensely deformed with ob- vious grainsize reduction, but quartz grains are recrystallized dominantly by grain growth. Hornblende grains show typical brittle-ductile transition nature. Initial crystallographic orientations of porphyro- clasts have strong effects on the behavior of grains during deformation. There are mainly two types of porphyroclasts, type I "hard" porphyroclasts and type II "soft" porphyroclasts, with [001] perpendicular and parallel to external shear stresses respectively. "Hard" porphyroclasts generally occur as compe- tent grains that are rarely deformed or sometimes deformed by fracturing and dislocation tangling. "Soft" porphyroclasts are highly deformed primarily by dislocation tangling (as shown in the cores of the porphyroclasts), but twinning, dislocation glide and climb probably due to hydrolytic weakening also contribute to dynamic recrystallization of the porphyroclasts into fine grains in the matrix. The micro- and submicrostructures of the two types of porphyroclasts and fine-grained matrix provide powerful evidence for the behavior of brittle-ductile transition of hornblende grains. It is concluded that twinning nucleation is one of the most important processes that operate during dynamic recrystalliza- tion of hornblende crystals at the brittle-ductile transition. (100) [001] twin gliding and dislocation creep (dislocation glide and climb) are mutually enhanced during twinning nucleation. As a newly discovered mechanism of dynamic recrystallization, it may have played more important roles than ever recognized during dynamic recrystallization of crystals with twins in the brittle-ductile transition. 相似文献
20.
H. Stel 《Pure and Applied Geophysics》1986,124(1-2):289-307
Cataclasites and mylonites, and the brittle-ductile processes that produce them, were studied at exposures along the northern rim of the Grong culmination, a transverse basement antiform in the central Scandinavian Caledonides. The rock suite studied is composed of gneisses, mylonites, and cataclasites which have a granodioritic composition. The microstructure of the rocks appears to be the result of repeated alternations of brittle faulting (associated with hydrothermal mineral growth) and ductile deformation of the crystallization products. During brittle faulting K-feldspar-chlorite veins are formed, probably by incongruent pressure solution of micas. During plastic deformation of the rocks the mineral association is transformed to white mica and green biotite, according to the reaction. $$5 biotite + 3 white mica + 9 quartz + 4 H_2 O = 8 K - feldspar + 9 chlorite$$ During this reaction plagioclase is overgrown by mica and epidote, and K-feldspar crystals are replaced by albite. The reactions which involve K-feldspars are cyclic: K-feldspar that is generated in cracks tends to be removed by albitization during ductile deformation. It is concluded that the mylonites studied represent a movement zone in the Earth's crust in which seismic and aseismic slip alternated during a large part of the deformation history. 相似文献