首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 56 毫秒
1.
This article describes the considerations which led to the current optical design of the new 1.5 m solar telescope GREGOR. The result is Gregorian design with two real foci in the optical train. The telescope includes a relay optic with a pupil image used by a high order adaptive optics system (AO). The optical design is described in detail and performance characteristics are given. Finally we show some verification results which prove that – without atmospheric effects – the completed telescope reaches a diffraction limited performance (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

2.
The new 1.5‐m German solar telescope GREGOR at the Observatorio del Teide, Tenerife, is equipped with an integrated adaptive optics system. Although partly still in the commissioning phase, the system is already being used used for most science observations. It is designed to provide diffraction‐limited observations in the visible‐light regime for seeing better than 1.2″. We describe the AO system including the optical design, software, wavefront reconstruction, and performance (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

3.
The integration and verification phase of the GREGOR telescope reached an important milestone with the installation of the interim 1 m SolarLite primary mirror. This was the first time that the entire light path had seen sunlight. Since then extensive testing of the telescope and its subsystems has been carried out. The integration and verification phase will culminate with the delivery and installation of the final 1.5 m Zerodur primary mirror in the summer of 2010. Observatory level tests and science verification will commence in the second half of 2010 and in 2011. This phase includes testing of the main optics, adaptive optics, cooling and pointing systems. In addition, assuming the viewpoint of a typical user, various observational modes of the GREGOR Fabry‐Pérot Interferometer (GFPI), the Grating Infrared Spectrograph (GRIS), and high‐speed camera systems will be tested to evaluate if they match the expectations and science requirements. This ensures that GREGOR will provide high‐quality observations with its combination of (multi‐conjugate) adaptive optics and advanced post‐focus instruments. Routine observations are expected for 2012 (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

4.
Equipped with a suitable optical relay system, telescopes employing low-cost fixed primary mirrors could point and track while delivering high-quality images to a fixed location. Such an optical tracking system would enable liquid-mirror telescopes to access a large area of sky and employ infrared detectors and adaptive optics. Such telescopes could also form the elements of an array in which light is combined either incoherently or interferometrically. Tracking of an extended field requires correction of all aberrations including distortion, field curvature and tilt. A specific design is developed that allows a 10-m liquid-mirror telescope to track objects for as long as 30 min and to point as far as 4° from the zenith, delivering a distortion-free diffraction-limited image to a stationary detector, spectrograph or interferometric beam combiner.  相似文献   

5.
The 1.5 m telescope GREGOR opens a new window to the understanding of solar small‐scale magnetism. The first light instrumentation includes the Gregor Fabry Pérot Interferometer (GFPI), a filter spectro‐polarimeter for the visible wavelength range, the GRating Infrared Spectro‐polarimeter (GRIS) and the Broad‐Band Imager (BBI). The excellent performance of the first two instruments has already been demonstrated at the Vacuum Tower Telescope. GREGOR is Europe’s largest solar telescope and number 3 in the world. Its all‐reflective Gregory design provides a large wavelength coverage from the near UV up to at least 5 microns. The field of view has a diameter of 150″. GREGOR is equipped with a high‐order adaptive optics system, with a subaperture size of 10 cm, and a deformable mirror with 256 actuators. The science goals are focused on, but not limited to, solar magnetism. GREGOR allows us to measure the emergence and disappearance of magnetic flux at the solar surface at spatial scales well below 100 km. Thanks to its spectro‐polarimetric capabilities, GREGOR will measure the interaction between the plasma flows, different kinds of waves, and the magnetic field. This will foster our understanding of the processes that heat the chromosphere and the outer layers of the solar atmosphere. Observations of the surface magnetic field at very small spatial scales will shed light on the variability of the solar brightness (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

6.
The new Solar telescope GREGOR is designed to observe small‐scale dynamic magnetic structures below a size of 70 km on the Sun with high spectral resolution and polarimetric accuracy. For this purpose, the polarimetric concept of GREGOR is based on a combination of post‐focus polarimeters with pre‐focus equipment for high precision calibration. The Leibniz‐Institute for Astrophysics Potsdam developed the GREGOR calibration unit which is an integral part of the telescope. We give an overview of the function and design of the calibration unit and present the results of extensive testing series done in the Solar Observatory “Einsteinturm” and at GREGOR (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

7.
We report the computation of the design of a polarimetric unit for the optical scheme of the fiberfed high-resolution spectrograph for the 6-m Russian telescope.We discuss a variant of its integration into the design of conversion optics at the input of the fiber path if the instrument and estimate the efficiency of the entire pre-fiber optical system. The luminous efficiency of the assembly is equal to 80 and 90% when operated in the polarimetry and normal spectroscopic modes, respectively.We estimate the lower limit for the distorting instrumental effects of the polarimetric unit.  相似文献   

8.
  相似文献   

9.
The NST (New Solar Telescope), a 1.6 m clear aperture, off‐axis telescope, is in its commissioning phase at Big Bear Solar Observatory (BBSO). It will be the most capable, largest aperture solar telescope in the US until the 4 m ATST (Advanced Technology Solar Telescope) comes on‐line late in the next decade. The NST will be outfitted with state‐of‐the‐art scientific instruments at the Nasmyth focus on the telescope floor and in the Coudé Lab beneath the telescope. At the Nasmyth focus, several filtergraphs already in routine operation have offered high spatial resolution photometry in TiO 706 nm, Hα 656 nm, G‐band 430 nm and the near infrared (NIR), with the aid of a correlation tracker and image reconstruction system. Also, a Cryogenic Infrared Spectrograph (CYRA) is being developed to supply high signal‐to‐noise‐ratio spectrometry and polarimetry spanning 1.0 to 5.0 μm. The Coudé Lab instrumentation will include Adaptive Optics (AO), InfraRed Imaging Magnetograph (IRIM), Visible Imaging Magnetograph (VIM), and Fast Imaging Solar Spectrograph (FISS). A 308 sub‐aperture (349‐actuator deformable mirror) AO system will enable nearly diffraction limited observations over the NST's principal operating wavelengths from 0.4 μm through 1.7 μm. IRIM and VIM are Fabry‐Pérot based narrow‐band tunable filters, which provide high resolution two‐dimensional spectroscopic and polarimetric imaging in the NIR and visible respectively. FISS is a collaboration between BBSO and Seoul National University focussing on chromosphere dynamics. This paper reports the up‐to‐date progress on these instruments including an overview of each instrument and details of the current state of design, integration, calibration and setup/testing on the NST (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

10.
  相似文献   

11.
This article introduces the new Indian 2 m telescope which has been designed by MT Mechatronics in a detailed conceptual design study for the Indian Institute of Astrophysics, Bangalore. We describe the background of the project and the science goals which shall be addressed with this telescope. NLST is a solar telescope with high optical throughput and will be equipped with an integrated Adaptive Optics system. It is optimized for a site with the kind of seeing and wind conditions as they are expected at a lake site in the Himalayan mountains. The telescope can also be used for certain night time applications. We also give the scientific rationale for this class of telescope (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

12.
A method for producing a laser guide star wavefront sensor for adaptive optics with reduced focal anisoplanatism is presented. A theoretical analysis and numerical simulations have been carried out and the results are presented. The technique, named Sky-Projected Laser Array Shack–Hartmann (SPLASH), is shown to suffer considerably less from focal anisoplanatism than a conventional laser guide star system. The method is potentially suitable for large telescope apertures (∼8 m), and possibly for extremely large telescopes.  相似文献   

13.
The point spread function of a segmented-mirror telescope is severely affected by segment misalignment, which can nullify the performance of adaptive optics systems. The piston and tilt of each segment must be precisely adjusted in relation to the other segments. Furthermore, the direct detection of the alignment error with natural stars would be desirable in order to monitor the errors during astronomical observation.
We have studied the lost information of the piston error caused by the presence of atmospheric turbulence in the measurements of curvature, and present a new algorithm for obtaining the local piston using the curvature sensor. A phase-wrapping effect is shown as responsible for the loss of curvature information and so the piston errors can no longer adequately be mapped; this happens not only in the presence of atmospheric turbulence, but also in its absence.
Good results are obtained using a new iterative method for obtaining the local piston error map. In the presence of atmospheric perturbation, the turbulent phase information obtained from a Shack–Hartmann sensor is introduced in our new iterative method. We propose a hybrid sensor composed of a curvature sensor and a Shack–Hartmann sensor, in order to complete all the information for the phasing. This design takes a short computation time and could be used in real time inside an adaptive optics system, where tilt and piston errors must be corrected.  相似文献   

14.
This paper discusses some of the challenges of spectro‐polarimetric observations with a large aperture solar telescope such as the ATST or the EST. The observer needs to reach a compromise between spatial and spectral resolution, time cadence, and signal‐to‐noise ratio, as only three of those four parameters can be pushed to the limit. Tunable filters and grating spectrographs provide a natural compromise as the former are more suitable for high‐spatial resolution observations while the latter are a better choice when one needs to work with many wavelengths at full spectral resolution. Given the requirements for the new science targeted by these facilities, it is important that 1) tunable filters have some multi‐wavelength capability; and 2) grating spectrographs have some 2D field of view (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

15.
A high‐order Adaptive Optical (AO) system for the 65 cm vacuum telescope of the Big Bear Solar Observatory (BBSO) is presented. The Coudé‐exit of the telescope has been modified to accommodate the AO system and two imaging magnetograph systems for visible‐light and near infrared (NIR) observations. A small elliptical tip/tilt mirror directs the light into an optical laboratory on the observatory's 2nd floor just below the observing floor. A deformable mirror (DM) with 77 mm diameter is located on an optical table where it serves two wave‐front sensors (WFS), a correlation tracker (CT) and Shack‐Hartman (SH) sensor for the high‐order AO system, and the scientific channels with the imaging magnetographs. The two‐axis tip/tilt platform has a resonance frequency around 3.3 kHz and tilt range of about 2 mrad, which corresponds to about 25″ in the sky. Based on 32 × 32 pixel images, the CT detects image displacements between a reference frame and real‐time frames at a rate of 2 kHz. High‐order wave‐front aberrations are detected in the SH WFS channel from slope measurements derived from 76 sub‐apertures, which are recorded with 1,280 × 1,024 pixel Complex Metal Oxide Semiconductor (CMOS) camera manufactured by Photobit camera. In the 4 × 4 pixel binning mode, the data acquisition rate of the CMOS device is more than 2 kHz. Both visible‐light and NIR imaging magnetographs use Fabry‐Pérot etalons in telecentric configurations for two‐dimensional spectro‐polarimetry. The optical design of the AO system allows using small aperture prefilters, such as interference or Lyot filters, and 70 mm diameter Fabry‐Pérot etalons covering a field‐of‐view (FOV) of about 180″ × 180″.  相似文献   

16.
Led by the National Solar Observatory, plans have been made to design and to develop the Advanced Technology Solar Telescope (ATST). The ATST will be a 4‐m general‐purpose solar telescope equipped with adaptive optics and versatile post‐focus instrumentation. Its main aim will be to achieve an angular resolution of 0.03 arcsec (20 km on the solar surface). The project and the telescope design are briefly described.  相似文献   

17.
The GraF instrument using a Fabry-Perot interferometer cross-dispersed with a grating was one of the first integral-field and long-slit spectrographs built for and used with an adaptive optics system. We describe its concept, design, optimal observational procedures and the measured performances. The instrument was used in 1997–2001 at the ESO3.6 m telescope equipped with ADONIS adaptive optics and SHARPII+camera. The operating spectral range was 1.2–2.5 μm. We used the spectral resolution from 500 to 10 000 combined with the angular resolution of 0.1″–0.2″. The quality of GraF data is illustrated by the integral field spectroscopy of the complex0.9″ × 0.9″ central region of η Car in the1.7 μm spectral range at the limit of spectral and angular resolutions. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

18.
We describe a new polarimetric facility available at the Istituto Nazionale di AstroFisica / Telescopio Nazionale Galileo at La Palma, Canary islands. This facility, PAOLO (Polarimetric Add‐On for the LRS Optics), is located at a Nasmyth focus of an alt‐az telescope and requires a specific modeling in order to remove the time‐ and pointing position‐dependent instrumental polarization. We also describe the opto‐mechanical structure of the instrument and its calibration and present early examples of applications. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

19.
The mechanical structure of the GREGOR telescope was installed at the Observatorio del Teide, Tenerife, in 2004. New concepts for mounting and cooling of the 1.5‐meter primary mirror were introduced. GREGOR is an open telescope, therefore the dome is completely open during observations to allow for air flushing through the open, but stiff telescope structure. Backside cooling system of the primary mirror keeps the mirror surface close to ambient temperature to prevent mirror seeing. The large collecting area of the primary mirror results in high energy density at the field stop at the prime focus of the primary which needs to be removed. The optical elements are supported by precision alignment systems and should provide a stable solar image at the optical lab. The coudé train can be evacuated and serves as a natural barrier between the outer environmental conditions and the air‐conditioned optical laboratory with its sensitive scientific instrumentation. The telescope was successfully commissioned and will start its nominal operation during 2013 (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

20.
Restricted by the observational condition and the hardware, adaptive optics can only make a partial correction of the optical images blurred by atmospheric turbulence. A postprocessing method based on frame selection and multi-frame blind deconvolution is proposed for the restoration of high-resolution adaptive optics images. By frame selection we mean we first make a selection of the degraded (blurred) images for participation in the iterative blind deconvolution calculation, with no need of any a priori knowledge, and with only a positivity constraint. This method has been applied to the restoration of some stellar images observed by the 61-element adaptive optics system installed on the Yunnan Observatory 1.2m telescope. The experimental results indicate that this method can effectively compensate for the residual errors of the adaptive optics system on the image, and the restored image can reach the diffraction-limited quality.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号