首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A high‐order Adaptive Optical (AO) system for the 65 cm vacuum telescope of the Big Bear Solar Observatory (BBSO) is presented. The Coudé‐exit of the telescope has been modified to accommodate the AO system and two imaging magnetograph systems for visible‐light and near infrared (NIR) observations. A small elliptical tip/tilt mirror directs the light into an optical laboratory on the observatory's 2nd floor just below the observing floor. A deformable mirror (DM) with 77 mm diameter is located on an optical table where it serves two wave‐front sensors (WFS), a correlation tracker (CT) and Shack‐Hartman (SH) sensor for the high‐order AO system, and the scientific channels with the imaging magnetographs. The two‐axis tip/tilt platform has a resonance frequency around 3.3 kHz and tilt range of about 2 mrad, which corresponds to about 25″ in the sky. Based on 32 × 32 pixel images, the CT detects image displacements between a reference frame and real‐time frames at a rate of 2 kHz. High‐order wave‐front aberrations are detected in the SH WFS channel from slope measurements derived from 76 sub‐apertures, which are recorded with 1,280 × 1,024 pixel Complex Metal Oxide Semiconductor (CMOS) camera manufactured by Photobit camera. In the 4 × 4 pixel binning mode, the data acquisition rate of the CMOS device is more than 2 kHz. Both visible‐light and NIR imaging magnetographs use Fabry‐Pérot etalons in telecentric configurations for two‐dimensional spectro‐polarimetry. The optical design of the AO system allows using small aperture prefilters, such as interference or Lyot filters, and 70 mm diameter Fabry‐Pérot etalons covering a field‐of‐view (FOV) of about 180″ × 180″.  相似文献   

2.
Adaptive optics （AO）, which provides diffraction limited imaging over a field-of-view （FOV）, is a powerful technique for solar observation. In the tomographic approach, each wavefront sensor （WFS） is looking at a single reference that acts as a guide star. This allows a 3D reconstruction of the distorted wavefront to be made. The correction is applied by one or more deformable mirrors （DMs）. This technique benefits from information about atmospheric turbulence at different layers, which can be used to reconstruct the wavefront extremely well. With the assistance of the MAOS software package, we consider the tomography errors and WFS aliasing errors, and focus on how the performance of a solar telescope （pointing toward zenith） is related to atmospheric anisoplanatism. We theoretically quantify the performance of the to- mographic solar AO system. The results indicate that the tomographic AO system can improve the average Strehl ratio of a solar telescope in a 10＂ - 80＂ diameter FOV by only employing one DM conjugated to the telescope pupil. Furthermore, we discuss the effects of DM conjugate altitude on the correction achievable by the AO system by selecting two atmospheric models that differ mainly in terms of atmospheric prop- erties at ground level, and present the optimum DM conjugate altitudes for different observation sites.  相似文献   

3.
The new 1.5‐m German solar telescope GREGOR at the Observatorio del Teide, Tenerife, is equipped with an integrated adaptive optics system. Although partly still in the commissioning phase, the system is already being used used for most science observations. It is designed to provide diffraction‐limited observations in the visible‐light regime for seeing better than 1.2″. We describe the AO system including the optical design, software, wavefront reconstruction, and performance (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

4.
Since its conception, Doppler tomography has matured into a versatile and widely used tool. It exploits the information contained in the highly‐structured spectral line‐profiles typically observed in mass‐transferring binaries. Using inversion techniques akin to medical imaging, it permits the reconstruction of Doppler maps that image the accretion flow on micro‐arcsecond scales. I summarise the basic concepts behind the technique and highlight two recent results; the use of donor star emission as a means to system parameter determination, and the real‐time movies of the evolving accretion flow in the cataclysmic variable WZ Sge during its 2001 outburst. I conclude with future opportunities in Doppler tomography by exploiting the combination of superior data sets, second generation reconstruction codes and simulated theoretical tomograms to delve deeper into the physics of accretion flows. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

5.
The NST (New Solar Telescope), a 1.6 m clear aperture, off‐axis telescope, is in its commissioning phase at Big Bear Solar Observatory (BBSO). It will be the most capable, largest aperture solar telescope in the US until the 4 m ATST (Advanced Technology Solar Telescope) comes on‐line late in the next decade. The NST will be outfitted with state‐of‐the‐art scientific instruments at the Nasmyth focus on the telescope floor and in the Coudé Lab beneath the telescope. At the Nasmyth focus, several filtergraphs already in routine operation have offered high spatial resolution photometry in TiO 706 nm, Hα 656 nm, G‐band 430 nm and the near infrared (NIR), with the aid of a correlation tracker and image reconstruction system. Also, a Cryogenic Infrared Spectrograph (CYRA) is being developed to supply high signal‐to‐noise‐ratio spectrometry and polarimetry spanning 1.0 to 5.0 μm. The Coudé Lab instrumentation will include Adaptive Optics (AO), InfraRed Imaging Magnetograph (IRIM), Visible Imaging Magnetograph (VIM), and Fast Imaging Solar Spectrograph (FISS). A 308 sub‐aperture (349‐actuator deformable mirror) AO system will enable nearly diffraction limited observations over the NST's principal operating wavelengths from 0.4 μm through 1.7 μm. IRIM and VIM are Fabry‐Pérot based narrow‐band tunable filters, which provide high resolution two‐dimensional spectroscopic and polarimetric imaging in the NIR and visible respectively. FISS is a collaboration between BBSO and Seoul National University focussing on chromosphere dynamics. This paper reports the up‐to‐date progress on these instruments including an overview of each instrument and details of the current state of design, integration, calibration and setup/testing on the NST (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

6.
This article describes the considerations which led to the current optical design of the new 1.5 m solar telescope GREGOR. The result is Gregorian design with two real foci in the optical train. The telescope includes a relay optic with a pupil image used by a high order adaptive optics system (AO). The optical design is described in detail and performance characteristics are given. Finally we show some verification results which prove that – without atmospheric effects – the completed telescope reaches a diffraction limited performance (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

7.
The Coudé feed of the vacuum telescope (aperture D = 65 cm) at the Big Bear Solar Observatory (BBSO) is currently completely remodelled to accommodate a correlation tracker and a high‐order Adaptive Optics (AO) system. The AO system serves two imaging magnetograph systems located at a new optical laboratory on the observatory's 2nd floor. The InfraRed Imaging Magnetograph (IRIM) is an innovative magnetograph system for near‐infrared (NIR) observations in the wavelength region from 1.0 μm to 1.6 μm. The Visible‐light Imaging Magnetograph (VIM) is basically a twin of IRIM for observations in the wavelength range from 550 nm to 700 nm. Both instruments were designed for high spatial and high temporal observations of the solar photosphere and chromosphere. Real‐time data processing is an integral part of the instruments and will enhance BBSO's capabilities in monitoring solar activity and predicting and forecasting space weather.  相似文献   

8.
We present, for the first time, high-spatial-resolution observations combining high-order adaptive optics (AO), frame selection, and post-facto image correction via speckle masking. The data analysis is based on observations of solar active region NOAA 10486 taken with the Dunn Solar Telescope (DST) at the Sacramento Peak Observatory (SPO) of the National Solar Observatory (NSO) on 29 October 2003. The high Strehl ratio encountered in AO corrected short-exposure images provides highly improved signal-to-noise ratios leading to a superior recovery of the object’s Fourier phases. This allows reliable detection of small-scale solar features near the diffraction limit of the telescope. Speckle masking imaging provides access to high-order wavefront aberrations, which predominantly originate at high atmospheric layers and are only partially corrected by the AO system. In addition, the observations provided qualitative measures of the image correction away from the lock point of the AO system. We further present a brief inspection of the underlying imaging theory discussing the limitations and prospects of this multi-faceted image reconstruction approach in terms of the recovery of spatial information, photometric accuracy, and spectroscopic applications.The editors apologize to the authors: due to a misunderstanding during the editorial process, the publication of this paper has been delayed.  相似文献   

9.
We give a short overview of the Adaptive Optics (AO) and Multi‐conjugate Adaptive Optics (MCAO) system of the planned 4 m European Solar Telescope (EST). The optimization process of the AO / MCAO parameters is shown, including the parameters and layout of the Shack‐Hartmann wavefront sensor setup and the DMs. We show the expected performance of the AO and MCAO system (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

10.
We develop a radio astronomical approach to 3D‐reconstruction in few projections tomography. It is based on the 2‐CLEAN DSA method which consists of two clean algorithms by using a synthesized beam. In complex cases two extreme solutions are used for the analysis of the image structure. These solutions determine the limits of permissible energy redistribution on the image among the components of small and large scales. Two variants of 3D‐reconstruction proceeding from a set of two‐dimensional projections (3D2D) and from a set of one‐dimensional ones (3D1D) are considered. It is shown that the quality of 3D2D‐reconstruction should be similar to the quality of 2D1D‐reconstruction if the same number of equally spaced scans is used. But a doubled number of projections is required for 3D1D‐reconstruction. We have simulated 3D‐reconstruction of an optically thin emitting object. The present technique is a component of astrotomography and it has good prospects for a wide range of remote sensing. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

11.
The next generation of solar telescopes will enable us to resolve the fundamental scales of the solar atmosphere, i.e., the pressure scale height and the photon mean free path. High‐resolution observations of small‐scale structures with sizes down to 50 km require complex post‐focus instruments, which employ adaptive optics (AO) and benefit from advanced image restoration techniques. The GREGOR Fabry‐Pérot Interferometer (GFPI) will serve as an example of such an instrument to illustrate the challenges that are to be expected in instrumentation and data analysis with the next generation of solar telescopes (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

12.
The quantitative spectroscopy of stellar objects in complex environments is mainly limited by the ability of separating the object from the background. Standard slit spectroscopy, restricting the field of view to one dimension, is obviously not the proper technique in general. The emerging Integral Field (3D) technique with spatially resolved spectra of a two‐dimensional field of view provides a great potential for applying advanced subtraction methods. In this paper an image reconstruction algorithm to separate point sources and a smooth background is applied to 3D data. Several performance tests demonstrate the photometric quality of the method. The algorithm is applied to real 3D observations of a sample Planetary Nebula in M31, whose spectrum is contaminated by the bright and complex galaxy background. The ability of separating sources is also studied in a crowded field in M33. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

13.
  相似文献   

14.
Observation made at low evelation angles is the trend of development of GPS (Global Positioning System) meteorology, wherein the development of highly accurate atmospheric hydrostatic delay corrections at low elevating angles is the main key technique. The comparison among three methods for calculating the atmospheric hydrostatic delay correction of the radio waves from space to the ground-based receiver is made: (1) the atmospheric hydrostatic delay obtained from the path integration of the sounding balloon data under the assumption of atmospheric spherical symmetry, (2) the atmospheric hydrostatic delay acquired from the reanalyzed data of the NCEP (National Centers for Environmental Prediction) under the assumption of atmospheric spherical symmetry and (3) the atmospheric hydrostatic delay got from Niell's atmospheric hydrostatic mapping function. The results of the comparison of them with the atmospheric hydrostatic mapping function obtained from the calculation carried out by taking advantage of the data acquired at 89 sounding balloon stations in China in 2001 show that the accuracy of the method of the path integration of the reanalyzed data of NCEP at low elevating angles (bellow 5°) is about 5 times better than that of the Niell mapping function model.  相似文献   

15.
Difference imaging is a technique for obtaining precise relative photometry of variable sources in crowded stellar fields and, as such, constitutes a crucial part of the data reduction pipeline in surveys for microlensing events or transiting extrasolar planets. The Optimal Image Subtraction (OIS) algorithm of Alard & Lupton (1998) permits the accurate differencing of images by determining convolution kernels which, when applied to reference images with particularly good seeing and signal‐to‐noise (S/N), provide excellent matches to the point‐spread functions (PSF) in other images of the time series to be analysed. The convolution kernels are built as linear combinations of a set of basis functions, conventionally bivariate Gaussians modulated by polynomials. The kernel parameters, mainly the widths and maximal degrees of the basis function model, must be supplied by the user. Ideally, the parameters should be matched to the PSF, pixel‐sampling, and S/N of the data set or individual images to be analysed. We have studied the dependence of the reduction outcome as a function of the kernel parameters using our new implementation of OIS within the IDL‐based TRIPP package. From the analysis of noise‐free PSF simulations of both single objects and crowded fields, as well as the test images in the ISIS OIS software package, we derive qualitative and quantitative relations between the kernel parameters and the success of the subtraction as a function of the PSF widths and sampling in reference and data images and compare the results to those of other implementations found in the literature. On the basis of these simulations, we provide recommended parameters for data sets with different S/N and sampling. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

16.
In 2006 ESO Council authorized a Phase B study of a European AO‐telescope with a 42 m segmented primary with a 5‐mirror design, the E‐ELT. Several reports and working groups have already presented science cases for an E‐ELT, specifically exploiting the new capabilities of such a large telescope. One of the aims of the design has been to find a balance in the performances between an E‐ELT and the James Webb Space Telescope, JWST. Apart from the larger photon‐collecting area, the strengths of the former is the higher attainable spatial and spectral resolutions. The E‐ELT AO system will have an optimal performance in the near‐IR, which makes it specially advantageous. High‐resolution spectroscopy in the near‐infrared has, however, not been discussed much. This paper aims at filling that gap, by specifically discussing spectroscopy of stellar (mainly red giant), photospheric abundances. Based on studies in the literature of stellar abundances, at the needed medium to high spectral resolutions in the near‐infrared (0.8–2.4 μm), I will try to extrapolate published results to the performance of the E‐ELT and explore what could be done at the E‐ELT in this field. A discussion on what instrument characteristics that would be needed for stellar abundance analyses in the near‐IR will be given (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

17.
GRB absorption spectroscopy opened up a new window in the study of the high redshift Universe, especially with the launch of the Swift satellite and the quick and precise localization of the afterglow. Eight‐meter class telescopes can be repointed within a few hours from the GRB, enabling the acquisition of high signal‐to‐noise ratio and high resolution afterglow spectra. In this paper I will give a short review of what we learned through this technique, and I will present some of the first results obtained with the X‐shooter spectrograph (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

18.
大口径望远镜受大气湍流的影响,光学分辨率远远小于其自身光路所决定的衍射极限。为了相应的自适应光学系统设计,首先有必要对大气波动进行仿真以提供环境数据。通常的大气波前仿真方法需要通过计算结构函数,得到功率谱函数,进而得到仿真波前,但该方法存在计算速度慢,中间变量存储空间大的问题,给大口径望远镜或者长时间仿真带来很大不便。介绍了一种可行的基于迭代分形法的波前仿真方法,复杂度达到O（N）,可以大大提高波前仿真的速度。  相似文献   

19.
The stellar surface imaging technique is used for studying stellar non‐radial pulsations on the basis of inversions of time series of variable line profiles without making assumptions on the specific shape of the pulsations. The inversion results in an image of the stellar surface in which sectoral and tesseral modes can be distinguished in many cases and the pulsational degree and the azimuthal order can be determined. The capability of the technique is studied with simulated data. Then, the surface imaging technique is applied to high‐resolution spectra of the rapidly rotating Beta Cep‐type star ω1 Sco, which shows strong line‐profile variations. Stellar surface imaging is concluded to be a useful technique for pulsation‐mode identification. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

20.
The reconstruction of the solar activity during some years of the 18th century is poorly known because there are scarce sunspot observations. The aim of this short contribution is to present a “lost” sunspot observation realized by the Portuguese scientist Sanches Dorta during his observation of the solar eclipse of 1785 from Rio de Janeiro (Brazil). This record was not included in the database compiled by Hoyt and Schatten (1998). We present new estimations of the solar activity during 1785. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号