The partial molal volume of silicic acid in 0.725 M NaCl at 1°C determined by the neutralization of Na₂SiO₃     

J.Peter Hershey  Iver W Duedall 《Geochimica et cosmochimica acta》1983,47(11):1931-1936

The partial molal volume of silicic acid ($\text{V}\text{?}\text{(Si(OH)}{}_4\text{)}$) in 0.725 M NaCl at 1°C was calculated from the measured volume change (Δ$\text{V}\text{?}{}_{\mathrm{n}}$) due to the neutralization of anhydrous sodium metasilicate with HCl and the $\text{V}\text{?}\text{(HCl)}$ and $\text{V}\text{?}\text{(NaCl)}$ obtained from the literature. $\text{V}\text{?}\text{(Si(OH)}{}_4\text{) = 59.0 cm}{}^3\text{mol}\text{? 1}$, determined under experimental conditions of pH = 2.2, compares favorably with $\text{V}\text{?}\text{(Si(OH)}{}_4\text{) = 58.9 cm}{}^3\text{mol}{}^{\mathrm{?1}}$ calculated from the measured volume change due to the hydrolysis of the meta-silicate salt at pH = 11 and from the partial molal volume due to electrostriction ($\text{V}\text{?}{}_{\mathrm{elect}}$) of water by charged Si species present in the solution at the high pH. This agreement lends support to a semiempirical model for calculating $\text{V}\text{?}{}_{\mathrm{elect}}$ in developed by Millero (1969). $\text{V}\text{?}\text{(NaOH) = ? 5.45 cm}{}^3\text{mol}{}^{\mathrm{?1}}$ in 0.725 M NaCl needed for this calculation was also determined in this work. The rate of polymerization of Si(OH)₄ at 1°C was monitored to insure that the monomer Si(OH)₄ was the main Si species present during the determination of $\text{V}\text{?}\text{(Si(OH)}{}_4\text{)}$ by neutralization of the alkali silicate. $\text{V}\text{?}\text{(Si(OH)}{}_4\text{)}$ determined in this study compares favorably with the value calculated from high pressure solubility measurements.  相似文献   

Partial molal volume calculations for the dissolution of aged amorphous silica in salt water and seawater at 0–2°C     

Joan D. Willey 《Geochimica et cosmochimica acta》1982,46(7):1307-1310

Measurement of solubility as a function of pressure allows calculation of $\text{3}\text{V}\text{?}{}_1$. Using this experimental approach, the best estimate of $\text{3}\text{V}\text{?}{}_1$ for the dissolution of aged amorphous silica in salt water or seawater at 0–2°C is ?9.9 cm³ mol^?1 (standard error = 0.4 cm³ mol^?1). This gives , which compares well with other published values of .  相似文献   

The effect of pressure on the solubility of minerals in water and seawater     

Frank J Millero 《Geochimica et cosmochimica acta》1982,46(1):11-22

The effect of presure on the solubility of minerals in water and seawater can be estimated from In where the volume (ΔV) and compressibility (ΔK) changes at atmospheric pressure (P = 0) are given by Values of the partial molal volume ($\text{V}\text{?}$) and compressibilty ($\text{K}\text{?}$) in water and seawater have been tabulated for some ions from 0 to 50°C. The compressibility change is quite large (~10 × 10^?3 cm³ bar^?1 mol^?1) for the solubility of most minerals. This large compressibility change accounts for the large differences observed between values of ΔV obtained from linear plots of In K_sp versus P and molal volume data (Macdonald and North, 1974; North, 1974). Calculated values of $\text{K}{}^{\mathrm{P}}{}_{\mathrm{sp}}\text{K}{}^{\mathrm{o}}{}_{\mathrm{sp}}$ for the solubility of CaCO₃, SrSO₄ and CaF₂ in water were found to be in good agreement with direct measurements (Macdonald and North, 1974). Similar calculations for the solubility of minerals in seawater are also in good agreement with direct measurements (Ingle, 1975) providing that the surface of the solid phase is not appreciably altered.  相似文献   

The effect of pressure on the ionization of boric acid in sodium chloride and seawater from molal volume data at 0 and 25°C     

Gary K Ward  Frank J Millero 《Geochimica et cosmochimica acta》1975,39(12):1595-1604

The apparent molal volume, φ_V of boric acid, B(OH)₃ and sodium borate, NaB(OH)₄, have been determined in 35%. salinity seawater and 0·725 molal NaCl solutions at 0 and 25°C from precise density measurements. Similar to the behavior of nonelectrolytes and electrolytes in pure water, the φ_V of B(OH)₃ is a linear function of added molality and the φ_V of NaB(OH)₄ is a linear function of the square root of added molarity in seawater and NaCl solutions. The partial molal volumes, $\text{V}\text{?}\text{1}$, of B(OH)₃ and NaB(OH)₄ in seawater and NaCl were determined from the φ_V's by extrapolating to infinite dilution in the medium. The $\text{V}\text{?}\text{1}$ of B(OH)₃ is larger in NaCl and seawater than pure water apparently due to the ability of electrolytes to dehydrate the nonelectrolyte B(OH)₃. The $\text{V}\text{?}\text{1}$ of NaB(OH)₄ in itself, NaCl and seawater is larger than the expected value at 0·725 molal ionic strength due to ion pair formation [Na⁺ + B(OH)₄^? → NaB(OH)₄⁰]. The volume change for the formation of NaB(OH)₄⁰ in itself and NaCl was found to be equal to 29·4 ml mol^?1 at 25°C and 0·725 molal ionic strength. These large $\text{Δ}\text{V}\text{?}\text{1}$'s indicate that at least one water molecule is released when the ion pair is formed [Na⁺ + B(OH)₄^? → H₂O + NaOB(OH)₂⁰]. The observed $\text{V}\text{?}\text{1}$ in seawater and the $\text{Δ}\text{V}\text{?}\text{1}$ (NaB⁰) in water and NaCl were used to estimate $\text{Δ}\text{V}\text{?}\text{1 (MgB}{}^{\mathrm{+}}\text{) = Δ}\text{V}\text{?}\text{1 (CaB}{}^{\mathrm{+}}\text{) = 38·4 ml mol}{}^{\mathrm{?1}}$ for the formation of MgB⁺ and CaB⁺. The volume change for the ionization of B(OH)₃ in NaCl and seawater was determined from the molal volume data. Values of $\text{Δ}\text{V}\text{?}\text{1 = ?29·2 and ?25·9 ml mol}{}^{\mathrm{?1}}$ were found in seawater and $\text{Δ}\text{V}\text{?}\text{1 = ?21·6 and ?26·4}$ in NaCl, respectively, at 0 and 25°C. The effect of pressure on the ionization of B(OH)₃ in NaCl and seawater at 0 and 25°C determined from the volume change is in excellent agreement with direct measurements in artificial seawater (culberson and Pytkowicz, 1968; Disteche and Disteche, 1967) and natural seawater (Culberson and Pytkowicz, 1968).  相似文献   

Complexing of silica by iron(III) in natural waters     

E.J. Reardon 《Chemical Geology》1979,25(4):339-345

Determination of amorphous silica solubility in acidified ferric nitrate solutions confirms the presence of ferric silicate complexing. A dissociation constant for the reaction: of 10^?9.8 ± 0.3 pK units at room temperature (22 ± 3°C) is obtained, in close agreement with reported values at 25°C corrected to zero ionic strength of 10^?9.9 by Weber and Stumm and 10^?9.5 by Olson and O'Melia. Iron-silicate complexing may be of significance to the mobilization of silica in acid waters associated with oxidizing sulphide deposits and coal strip mining and the precipitation of secondary silicate mineral phases.  相似文献   

Density calculations for silicate liquids. I. Revised method for aluminosilicate compositions     

Y Bottinga  D Weill  P Richet 《Geochimica et cosmochimica acta》1982,46(6):909-919

Equations are developed for calculating the density of aluminosilicate liquids as a function of composition and temperature. The mean molar volume at reference temperature T_r, is given by $\text{V}{}_{\mathrm{r}}\text{= ∑X}{}_{\mathrm{i}}\text{V}\text{?}{}^{\mathrm{o}}{}_{\mathrm{i}}\text{+ X}{}_{\mathrm{A}}\text{V}\text{?}{}^{\mathrm{o}}{}_{\mathrm{A}}$, where the summation is taken over all oxide components except A1₂O₃, X stands for mole fraction, terms are constants derived independently from an analysis of volume-composition relations in alumina-free silicate liquids, and $\text{V}\text{?}{}^{\mathrm{o}}{}_{\mathrm{A}}$ is the composition-dependent apparent partial molar volume of Al₂O₃. The thermal expansion coefficient of aluminosilicate liquids is given by $\text{α = ∑X}{}_{\mathrm{i}}\text{}\text{?}\text{ga}{}_{\mathrm{i}}{}^{\mathrm{o}}\text{+ X}{}_{\mathrm{A}}\text{}\text{?}\text{ga}{}_{\mathrm{A}}{}^{\mathrm{o}}$, where $\text{}\text{?}\text{ga}{}_{\mathrm{i}}{}^{\mathrm{o}}$ terms are constants independent of temperature and composition, and $\text{}\text{?}\text{ga}{}^{\mathrm{o}}{}_{\mathrm{A}}$ is a composition-dependent term representing the effect of Al₂O₃ on the thermal expansion. Parameters necessary to calculate the volume of silicate liquids at any temperature T according to V(T) = V_rexp[α(T-T_r)], where T_r = 1400°C have been evaluated by least-square analysis of selected density measurements in aluminosilicate melts. Mean molar volumes of aluminosilicate liquids calculated according to the model equation conform to experimentally measured volumes with a root mean square difference of 0.28 $\text{cc}\text{mole}$ and an average absolute difference of 0.90% for 248 experimental observations. The compositional dependence of $\text{V}\text{?}{}^{\mathrm{o}}{}_{\mathrm{A}}$ is discussed in terms of several possible interpretations of the structural role of Al³⁺ in aluminosilicate melts.  相似文献   

Gibbsite solubility and thermodynamic properties of hydroxy-aluminum ions in aqueous solution at 25°C     

Howard M. May  Philip A. Helmke  Marion L. Jackson 《Geochimica et cosmochimica acta》1979,43(6):861-868

Solubility curves were determined for a synthetic gibbsite and a natural gibbsite (Minas Gerais, Brazil) from pH 4 to 9, in 0.2% gibbsite suspensions in 0.01 M NaNO₃ that were buffered by low concentrations of non-complexing buffer agents. Equilibrium solubility was approached from oversaturation (in suspensions spiked with Al(NO₃)₃ solution), and also from undersaturation in some synthetic gibbsite suspensions. Mononuclear Al ion concentrations and pH values were periodically determined. Within 1 month or less, data from over-and undersaturated suspensions of synthetic gibbsite converged to describe an equilibrium solubility curve. A downward shift of the solubility curve, beginning at pH 6.7, indicates that a phase more stable than gibbsite controls Al solubility in alkaline systems. Extrapolation of the initial portion of the high-pH side of the synthetic gibbsite solubility curve provides the first unified equilibrium experimental model of Al ion speciation in waters from pH 4 to 9.The significant mononuclear ion species at equilibrium with gibbsite are Al³⁺, AlOH²⁺, Al(OH)⁺₂ and Al(OH)^?₄, and their ion activity products are $\text{1K}{}_{50}\text{= 1.29 × 10}{}^8$, $\text{1K}{}_{\mathrm{s1}}\text{= 1.33 × 10}{}^3$, $\text{1K}{}_{\mathrm{s2}}\text{= 9.49 × 10}{}^{\mathrm{?3}}$ and $\text{1K}{}_{\mathrm{s4}}\text{= 8.94 × 10}{}^{\mathrm{?15}}$. The calculated standard Gibbs free energies of formation (ΔG°_f) for the synthetic gibbsite and the A1OH²⁺, Al(OH)⁺₂ and Al(OH)^?₄ ions are ?276.0, ?166.9, ?216.5 and ?313.5 kcal mol^?1, respectively. These ΔG°_f values are based on the recently revised ΔG°_f value for Al³⁺ (?117.0 ± 0.3 kcal mol_?1) and carry the same uncertainty. The ΔG°_f of the natural gibbsite is ?275.1 ± 0.4 kcal mol^?, which suggests that a range of ΔG°_f values can exist even for relatively simple natural minerals.  相似文献   

Methane solubilities in multisalt solutions     

Patricia A. Byrne  Ronald K. Stoessell 《Geochimica et cosmochimica acta》1982,46(11):2395-2397

Solubilities of methane in multisalt solutions at 550 psia and 25°C can be predicted from single-salt salting coefficients. The ionic strength contribution of the ith salt, I_i, is multiplied by its molal salting coefficient, k_mi, in the following summation over all salts: where m_o and m_s are molal methane solubilities in distilled water and the salt solution, respectively, at the T, P and methane fugacity of interest.This equation predicts methane solubility in multisalt brines containing Na⁺, K⁺, Mg⁺², Ca⁺², Cl^?, SO₄^?2 and CO₃^?2 ions. k_mi values reported by Stoessell and Byrne (1982b) can be used in solubility predictions in brines at earth surface conditions. Prediction in reservoir brines would require determination of k_mi, for the different salts at reservoir temperatures and pressures.  相似文献   

Carbonate equilibria in hydrothermal systems: First ionization of carbonic acid in NaCl media to 300°C     

C.S Patterson  G.H Slocum  R.H Busey  R.E Mesmer 《Geochimica et cosmochimica acta》1982,46(9):1653-1663

The ionization quotients of aqueous carbon dioxide (carbonic acid) have been precisely determined in NaCl media to 5 m and from 50° to 300°C using potentiometric apparatus previously developed at Oak Ridge National Laboratory. The pressure coefficient was also determined to 250°C in the same media. These results have been combined with selected information in the literature and modeled in two ways to arrive at the best fits and to derive the thermodynamic parameters for the ionization reaction, including the equilibrium constant, activity coefficient quotients, and pressure coefficients. The variation with temperature of the two fundamental quantities $\text{Δ}\text{V}\text{?}{}^{\mathrm{o}}$ and $\text{Δ}\text{C}\text{?}{}^{\mathrm{o}}{}_{\mathrm{p}}$ were examined along the saturation vapor pressure curve and at constant density. The results demonstrated again that for reactions with minimal electrostriction changes the magnitudes and variations of $\text{Δ}\text{C}\text{?}{}^{\mathrm{o}}{}_{\mathrm{p}}$ and $\text{Δ}\text{V}\text{?}{}^{\mathrm{o}}$ with temperature are small and, in addition, $\text{Δ}\text{C}\text{?}{}_{\mathrm{p}}$ and $\text{Δ}\text{V}\text{?}$ are approximately independent of salt concentration.The results have also been applied to an examination of the solubility of calcite as a function of pH (in a given NaCl medium) for the neutral to acidic region both for systems with fixed CO₂ pressure and systems where the calcium ion concentration equals the concentration of carbon. The pH of saturated solutions of calcite with P_CO2 of 12 bars increases from 5.1 to 5.5 between 100° and 300°C.  相似文献   

Pressure sensitive “silica geothermometer” determined from quartz solubility experiments at 250 °C     

Kristín Vala Ragnarsdóttir  John V Walther 《Geochimica et cosmochimica acta》1983,47(5):941-946

Experimentally reversed quartz solubilities at 250°C and at 250, 500 and 1000 bars yield values of the logarithm of the molality of aqueous silica of ?2.126, ?2.087 and ?2.038, respectively. Extrapolation of quartz solubility to the saturation pressure of water at 250°C results in a log molality of aqueous silica of-2.168. These solubility determinations and analyses of fluid pressures in geothermal systems indicate that pressure is significant when calculating quartz equilibrium temperatures from silica concentrations in waters of deep thermal reservoirs.The results of this investigation, combined with other reported quartz solubility measurements, yielded a pressure-sensitive “silica geothermometer” for fluids that have undergone adiabatic steam loss of where P is the fluid pressure in bars and m_Si(OH)₄ · 2H₂O represents the molality of aqueous silica measured in surface samples. The geothermometer is applicable to solutions in equilibrium with quartz from 180°C to 340°C and fluid pressures from H₂O saturation to 500 bars.  相似文献   

Constantes de formation des complexes hydroxydés de l'aluminium en solution aqueuse de 20 a 70°C     

Yves Couturier  Gil Michard  Gérard Sarazin 《Geochimica et cosmochimica acta》1984,48(4):649-659

Stability constants of hydroxocomplexes of Al(III):Al(OH)²⁺ and A1(OH)₄^? have been measured in the 20–70°C temperature range by reactions involving only dissolved species. The stability constant ${}^1\text{K}{}_1$ of the first complex ion is studied by measuring pH of solutions of aluminium salts at several concentrations. ${}^1\text{β}{}_4$ of aluminate ion is deduced from equilibrium constants of the reaction between the trioxalato aluminium (III) complex ion and Al³⁺ in acid medium, and between the same complex ion and A1(OH)₄^? in alkaline medium. The K values and the associated ΔH are ${}^1\text{K}{}_1\text{= 10}{}^{\mathrm{?5.00}}$ and ΔH₁ = 11.8 Kcal; ${}^1\text{β}{}_4\text{= 10}{}^{\mathrm{?22.20}}$ and ΔH₄ = 42.45 Kcal. These last results are not in agreement with the values of recent tables for $\text{ΔG}{}^0\text{?}$ and $\text{ΔH}{}^0\text{?}$ of Al³⁺ and Al(OH)₄^?. We suggest a consistent set of data for dissolved and solid Al species and for some aluminosilicates.  相似文献   

Revised values for the Gibbs free energy of formation of [Al(OH)_{4 aq}⁻], diaspore,boehmite and bayerite at 298.15 K and 1 bar,the thermodynamic properties of kaolinite to 800 K and 1 bar,and the heats of solution of several gibbsite samples     

Bruce S. Hemingway  Richard A. Robie  James A. Kittrick 《Geochimica et cosmochimica acta》1978,42(10):1533-1543

Solution calorimetric measurements compared with solubility determinations from the literature for the same samples of gibbsite have provided a direct thermochemical cycle through which the Gibbs free energy of formation of [Al(OH)_{4 aq}^?] can be determined. The Gibbs free energy of formation of [Al(OH)_{4 aq}^?] at 298.15 K is ?1305 ± 1 kJ/mol. These heat-of-solution results show no significant difference in the thermodynamic properties of gibbsite particles in the range from 50 to 0.05 μm.The Gibbs free energies of formation at 298.15 K and 1 bar pressure of diaspore, boehmite and bayerite are ?9210 ± 5.0, ?918.4 ± 2.1 and ?1153 ± 2 kJ/mol based upon the Gibbs free energy of [A1(OH)_{4 aq}^?] calculated in this paper and the acceptance of ?1582.2 ± 1.3 and ?1154.9 ± 1.2 kJ/mol for the Gibbs free energy of formation of corundum and gibbsite, respectively.Values for the Gibbs free energy formation of [Al(OH)_{2 aq}⁺] and [AlO_{2 aq}^?] were also calculated as ?914.2 ± 2.1 and ?830.9 ± 2.1 kJ/mol, respectively. The use of [AlC_{2 aq}^?] as a chemical species is discouraged.A revised Gibbs free energy of formation for [H₄SiO_4aq⁰] was recalculated from calorimetric data yielding a value of ?1307.5 ± 1.7 kJ/mol which is in good agreement with the results obtained from several solubility studies.Smoothed values for the thermodynamic functions C_P⁰, ($\text{H}{}_{\mathrm{T}}{}^0\text{- H}{}_{298}{}^0\text{)}\text{T}$, $\text{(}\text{G}{}_{\mathrm{T}}{}^0\text{- H}{}_{298}{}^0\text{)}\text{T}$, S_T⁰ - S₀⁰, $\text{ΔH}{}_{\mathrm{?,298}}{}^0$ kaolinite are listed at integral temperatures between 298.15 and 800 K. The heat capacity of kaolinite at temperatures between 250 and 800 K may be calculated from the following equation: C_P⁰ = 1430.26 ? 0.78850 T + 3.0340 × 10^?4T² ?1.85158 × 10^?4T²$\text{1}\text{2}\text{+ 8.3341 × 10}{}^6\text{T}{}^{\mathrm{?2}}$.The thermodynamic properties of most of the geologically important Al-bearing phases have been referenced to the same reference state for Al, namely gibbsite.  相似文献   

Liquidus relationships in the system CaCO₃Ca(OH)₂CaS and the solubility of sulfur in carbonatite magmas     

George R. Helz  Peter J. Wyllie 《Geochimica et cosmochimica acta》1979,43(2):259-265

CaCO₃Ca(OH)₂CaS serves as a model system for sulfide solubility in carbonatite magmas. Experiments at 1 kbar delineate fields for primary crystallization of CaCO₃, Ca(OH)₂ and CaS. The three fields meet at a ternary eutectic at 652°C with liquid composition (wt%): CaCO₃ = 46.1%, Ca(OH)₂ = 51.9%, CaS = 2.0%. Two crystallization sequences are possible for liquids that precipitate calcite, depending upon whether the liquid is on the low-CaS side, or the high-CaS side of the line connecting CaCO₃ to the eutectic liquid. Low-CaS liquids precipitate no sulfide until the eutectic temperature is reached leading to sulfide enrichment. The higher-CaS liquids precipitate some sulfide above the eutectic temperature, but the sulfide content of the melt is not greatly depleted as the eutectic temperature is approached. Theoretical considerations indicate that sulfide solubility in carbonate melts will be directly proportional to and inversely proportional to ; it also is likely to be directly proportional to melt basicity, defined here by . A strong similarity exists in the processes which control sulfide solubility in carbonate and in silicate melts. By analogy with silicates, ferrous iron, which was absent in our experiments, may also exert an important influence on sulfide solubility in natural carbonatite magmas.  相似文献   

Rates of reaction of pyrite and marcasite with ferric iron at pH 2     

C.L Wiersma  J.D Rimstidt 《Geochimica et cosmochimica acta》1984,48(1):85-92

The relative reactivities of pulverized samples (100–200 mesh) of 3 marcasite and 7 pyrite specimens from various sources were determined at 25°C and pH 2.0 in ferric chloride solutions with initial ferric iron concentrations of 10^?3 molal. The rate of the reaction: was determined by calculating the rate of reduction of aqueous ferric ion from measured oxidation-reduction potentials. The reaction follows the rate law: where m_Fe³⁺ is the molal concentration of uncomplexed ferric iron, k is the rate constant and $\text{A}\text{M}$ is the surface area of reacting solid to mass of solution ratio. The measured rate constants, k, range from 1.0 × 10^?4 to 2.7 × 10^?4 sec^?1 ± 5%, with lower-temperature/early diagenetic pyrite having the smallest rate constants, marcasite intermediate, and pyrite of higher-temperature hydrothermal and metamorphic origin having the greatest rate constants. Geologically, these small relative differences between the rate constants are not significant, so the fundamental reactivities of marcasite and pyrite are not appreciably different.The activation energy of the reaction for a hydrothermal pyrite in the temperature interval of 25 to 50°C is 92 kJ mol^?1. This relatively high activation energy indicates that a surface reaction controls the rate over this temperature range. The BET-measured specific surface area for lower-temperature/early diagenetic pyrite is an order of magnitude greater than that for pyrite of higher-temperature origin. Consequently, since the lower-temperature types have a much greater $\text{A}\text{M}$ ratio, they appear to be more reactive per unit mass than the higher temperature types.  相似文献   

The distribution of divalent trace elements between sulfides,oxides, silicates and hydrothermal solutions: I. Thermodynamic basis     

Dimitrl A. Sverjensky 《Geochimica et cosmochimica acta》1985,49(3):853-864

Experimental data for the standard Gibbs free energies of formation from the elements of a wide variety of metal sulfides and oxides, spinels, olivines and pyroxenes at 25°C and 1 bar define linear correlations, within about ±900 cal·mole^?1, with the corresponding conventional standard partial molal Gibbs free energies of formation of the aqueous M²⁺ cations of the form where a_MaZ and b_MaZ are empirically determined constants characteristic of the structure M_nZ. The only exceptions to correlations of this type are compounds of the heavy alkaline earths Ca, Sr and Ba, which appear to follow correlations with cation radius instead. The linear free energy correlations enable prediction of standard Gibbs free energies of formation of compositional end-members of a particular structure M_nZ provided that a_MaZ and b_MaZ are known accurately. When only the free energy of the Mg end-member is known, the standard Gibbs free energy of formation at 25°C and 1 bar of the Fe endmember, and hence a_MaZ and b_MaZ Can be predicted from the temperature independence of and estimated entropies and heat capacities for the Fe end-member. Using this approach, the free energies of ferrosilite, hedenbergite and annite at 25°C and 1 bar were predicted to within ±1000 cal·mole^?1 of the helgesonet al. (1978) values. Free energies of formation of talc (M₃Si₄O₁₀(OH)₂), clinchlore (M₅Al₂Si₃O₁₀(OH)₈), and tremolite (Ca₂M₅(Si₄O₁₁)₂(OH)₂)-type compounds where M is Mg, Mn, Zn, Fe, Co, or Ni were then predicted at 25°C and 1 bar.Calculation of the equilibrium distribution of Mg, Zn and Sr between galena and hydrothermal solution, and Zn, Mg, Fe and Mn between chlorite and hydrothermal solution demonstrates: (1) that the Sr contents of low temperature galenas (e.g. Mississippi Valley-type) should be negligible (reported analyses of Sr content and Sr isotopic composition of such galenas are probably attributable to fluid inclusions or carbonate inclusions); and (2), that the Zn contents of hydrothermal chlorites in a model of the midoceanic ridge hydrothermal systems are sensitive to temperature, to complexing in the aqueous phase, and to the overall Fe/Mg ratio of the chlorite.  相似文献   

Kinetic and thermodynamic factors controlling the distribution of SO₃²⁻ and Na⁺ in calcites and selected aragonites     

Eurybiades Busenberg  L. Niel Plummer 《Geochimica et cosmochimica acta》1985,49(3):713-725

Significant amounts of SO₄^2?, Na⁺, and OH^? are incorporated in marine biogenic calcites. Biogenic high Mg-calcites average about 1 mole percent SO₄^2?. Aragonites and most biogenic low Mg-calcites contain significant amounts of Na⁺, but very low concentrations of SO₄^2?. The SO₄^2? content of non-biogenic calcites and aragonites investigated was below 100 ppm. The presence of Na⁺ and SO₄^2? increases the unit cell size of calcites. The solid-solutions show a solubility minimum at about 0.5 mole percent SO₄^2? beyond which the solubility rapidly increases. The solubility product of calcites containing 3 mole percent SO₄^2? is the same as that of aragonite. Na⁺ appears to have very little effect on the solubility product of calcites. The amounts of Na⁺ and SO₄^2? incorporated in calcites vary as a function of the rate of crystal growth. The variation of the distribution coefficient ($\text{D}$) of SO₄^2? in calcite at 25.0°C and 0.50 molal NaCl is described by the equation $\text{D = k}{}_0\text{+ k}{}_1\text{R}$ where $\text{k}{}_0$ and $\text{k}{}_1$ are constants equal to $\text{6.16 × 10}{}^{\mathrm{?6}}$ and $\text{3.941 × 10}{}^{\mathrm{?6}}$, respectively, and $\text{R}$ is the rate of crystal growth of calcite in mg·min^?1·g^?1 of seed. The data on Na⁺ are consistent with the hypothesis that a significant amount of Na⁺ occupies interstitial positions in the calcite structure. The distribution of Na⁺ follows a Freundlich isotherm and not the Berthelot-Nernst distribution law. The numerical value of the Na⁺ distribution coefficient in calcite is probably dependent on the number of defects in the calcite structure. The Na⁺ contents of calcites are not very accurate indicators of environmental salinities.  相似文献   

Prediction of Gibbs free energies of calcite-type carbonates and the equilibrium distribution of trace elements between carbonates and aqueous solutions     

Dimitri A Sverjensky 《Geochimica et cosmochimica acta》1984,48(5):1127-1134

A linear correlation exists between the standard Gibbs free energies of formation of calcite-type carbonates (MCO3) and the corresponding conventional standard Gibbs free energies of formation of the aqueous divalent cations (M2+) at 25 °C and 1 bar ΔGMCO30 = m(ΔGf,M2+0) ? 141,200 cal · mole?1 where m is equal to 0.9715. This relationship enables prediction of the standard free energies of formation of numerous hypothetical carbonates with the calcite structure. Associated uncertainties typically range from about ± 250 to 600 cal · mole?1. An important consequence of the above correlation is that the thermodynamic equilibrium constant for the distribution of two trace elements M and N between carbonate mineral and aqueous solution at 25 °C and 1 bar is proportional to the free energy difference between the corresponding two aqueous ions: In Combination of predicted standard free energies, entropies and volumes of carbonate minerals at 25°C and 1 bar with standard free energies of aqueous ions and the equation of state in Helgesonet al. (1981) enables prediction of the thermodynamic equilibrium constant for trace element distribution between carbonates and aqueous solutions at elevated temperatures and pressures. Interpretation of the thermodynamic equilibrium constant in terms of concentration ratios in the aqueous phase is considerably simplified if pairs of divalent trace elements are considered that have very similar ionic radii (e.g., $\text{Sr}{}^{\mathrm{2+}}\text{Pb}{}^{\mathrm{2+}}$, $\text{Mg}{}^{\mathrm{2+}}\text{Zn}{}^{\mathrm{2+}}$). In combination with data for the stabilities of complex ions in aqueous solutions, the above calculations enable useful limits to be placed on the concentrations of trace elements in hydrothermal solutions.  相似文献   

The use of the specific interaction model to estimate the partial molal volumes of electrolytes in seawater     

Frank J Millero 《Geochimica et cosmochimica acta》1977,41(2):215-223

The specific interaction model has been used to determine the partial molal volume of electrolytes in 0.725 m NaCl and 35‰ salinity seawater solutions at 25°C. The partial molal volumes of electrolytes (MX) were estimated at a given ionic strength (I) from , where S_V is the Debye-Hückel limiting law slope, v_i is the number of ions i formed when MX dissociated, [i] is the total molality of ion i and B_MX is a specific interaction parameter that varies slowly with ionic strength. The values of $\text{V}\text{(}\text{MX}\text{)}$ estimated by using this equation were found to agree very well with experimental values in NaCl and seawater providing there are not strong interactions between M and X. For electrolytes that form ion pairs (i.e. MX°) corrections must be made. Methods are discussed for making these corrections.  相似文献   

The kinetics of silica-water reactions     

J.D. Rimstidt  H.L. Barnes 《Geochimica et cosmochimica acta》1980,44(11):1683-1699

A differential rate equation for silica-water reactions from 0–300°C has been derived based on stoichiometry and activities of the reactants in the reaction SiO₂(s) + 2H₂O(l) = H₄SiO₄(aq) where ($\text{A}\text{M}$) = (the relative interfacial area between the solid and aqueous phases/the relative mass of water in the system), and k₊ and k_? are the rate constants for, respectively, dissolution and precipitation. The rate constant for precipitation of all silica phases is $\text{log k}{}_{\mathrm{?}}\text{= ? 0.707 ?}\text{2598}\text{T}\text{(T, K)}$ and E_act for this reaction is 49.8 kJ mol^?1. Corresponding equilibrium constants for this reaction with quartz, cristobalite, or amorphous silica were expressed as $\text{log K = a + bT +}\text{c}\text{T}$. Using $\text{K =}\text{k}{}_{\mathrm{+}}\text{k}{}_{\mathrm{?}}$, k was expressed as $\text{log k}{}_{\mathrm{+}}\text{= a + bT +}\text{c}\text{T}$ and a corresponding activation energy calculated: