首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
In an effort to obtain information about mineral/melt trace element partitioning during the high pressure petrogenesis of basic rocks, we determined rare earth and other trace element abundances in megacrysts of clinopyroxene, orthopyroxene, amphibole, mica, anorthoclase, apatite and zircon, and in their host basalts. In general, the ranges of mineral/melt partition coefficients established from experimental partitioning studies and phenocryst/matrix measurements overlap with the ranges of megacryst/host abundance ratios. Our data for Hf, Sc, Ta and Th partitioning represent some of the only estimates available. Consideration of phase equilibria, major element partitioning and isotopic ratios indicate that most of the pyroxene and amphibole megacrysts may have been in equilibrium with their host magmas at high pressures (mostly 10–25 kb). In contrast, it is unlikely that mica, anorthoclase, apatite and zircon megacrysts formed in equilibrium with their host basalts; instead, we conclude that they were precipitated from more evolved magmas and have been mixed into their present host magmas. Consequently, the trace element abundance ratios for megacryst/host should not be interpreted as partition coefficients, but only as guides for understanding trace element partitioning during high pressure petrogenesis. With this caveat, we conclude that the megacryst/ host trace element abundance data indicate that mineral/melt partition coefficients in basaltic systems during high pressure fractionation are not drastically different from partition coefficients valid for low pressure fractionation.  相似文献   

2.
浙江拔茅破火山岩浆作用:开放体系多机制复合演化   总被引:1,自引:3,他引:1  
拔茅火山杂岩的成分变化范围广泛,包括玄武质,玄武粗安质,粗面安山质,粗面英安质,流纹英安质到流纹质和高硅流纹质岩石都有,它们不是由单一母岩浆演化而来,也不是由单一岩浆房喷发形成的,而是来自多种类型的岩浆房,并经历过复杂的演化过程,为开放体系多机制复合演化,其中早期双峰式基性端元是由上地幔部分熔融形成的,而酸性端无则是地壳物质边熔融边喷发(分离熔融)的结果,作为火山杂岩主体的粗面英安质岩石,其岩浆是在高位主岩浆房内由玄武质岩浆与流纹英安质岩浆混合形成的,发生混合的流纹英安质与玄武质岩浆的比例为57:43,而粗面安山质岩浆则是溶部岩浆房内由玄武质岩浆分离结晶形成的,晚期侵出-侵入的流纹英安质岩穹和高硅流纹斑岩株则分别代表高位次级岩浆房的成分及其硅质帽。  相似文献   

3.
Kinetic effects on trace element partitioning have been measured for anorthite, forsterite, and diopside grown from synthetic compositions doped with REE. A seeding technique allowed determination of crystal growth rates and partitioning information was obtained from electron microprobe analyses. Compositional deviations from equilibrium values were sought in the crystals and as gradients in the quenched liquids adjacent to the crystals. The principal result is that large deviations in trace element distribution coefficients from equilibrium values do not occur because of a compensating effect. Rapid growth depletes the melt adjacent to the crystal in the elements of which the crystal is composed, leading to different values for apparent distribution coefficients. However, as the boundary layer melt becomes depleted in the components of the crystal, growth slows and the size of the compositional perturbations decreases. Crystals grown at very high rates (e.g., > 0.2 μm/sec for diopside) tended to be too small for accurate microprobe analyses, but are probably not compositionally extreme since the melts adjacent to the crystals did not acquire sizable compositional gradients. At moderately high growth rates (e.g., 0.02 μm/sec), crystals form in the presence of boundary layer compositions perturbed by as much as 10% from bulk melt values and, in diopside, attain concentrations for excluded trace elements about 70% higher than equilibrium values for crystals plus bulk melt. At the slower growth rates typical of igneous systems, kinetic effects on trace element partitioning are probably negligible.  相似文献   

4.
Olivine/melt and orthopyroxene/melt rare-earth element (REE) partition coefficients consistent with clinopyroxene/melt partition coefficients were determined indirectly from subsolidus partitioning between olivine, orthopyroxene, and clinopyroxene after suitable correction for temperature. Heavy- and middle-REE ratios for olivine/clinopyroxene and orthopyroxene/clinopyroxene pairs correlate negatively with effective cationic radius, whereas those for the light REEs correlate positively with cationic radius, generating a U-shaped pattern in apparent mineral/clinopyroxene partition coefficients versus cationic radius. Lattice strain models of partitioning modified for subsolidus conditions yield negative correlations of olivine/clinopyroxene and orthopyroxene/clinopyroxene with respect to cationic radii, predicting well the measured partitioning behaviors of the heavy and middle REEs but not that of the light REEs. The light-REE systematics cannot be explained with lattice strain theory and, instead, can be explained by disequilibrium enrichment of the light REEs in melt inclusions or on the rims of olivine and orthopyroxene. Realistic light-REE partition coefficients were thus extrapolated from the measured heavy- and middle-REE partition coefficients using the lattice strain model. Light REE olivine/melt and orthopyroxene/melt partition coefficients calculated in this manner are lower than most published values, but agree reasonably well with partitioning experiments using the most recent in situ analytical techniques (secondary-ionization mass spectrometry and laser ablation inductively coupled plasma mass spectrometry). These new olivine/melt and orthopyroxene/melt partition coefficients are useful for accurate modeling of the REE contents of clinopyroxene-poor to -free lithologies, such as harzburgitic residues of melting. Finally, the application of the lattice strain theory to subsolidus conditions represents a framework for assessing the degree of REE disequilibrium in a rock.  相似文献   

5.
Isobaric and isothermal experiments were performed to investigate the effect of melt composition on the partitioning of trace elements between titanite (CaTiSiO5) and a range of different silicate melts. Titanite-melt partition coefficients for 18 trace elements were determined by secondary ion mass spectrometry (SIMS) analyses of experimental run products. The partition coefficients for the rare earth elements and for Th, Nb, and Ta reveal a strong influence of melt composition on partition coefficients, whereas partition coefficients for other studied monovalent, divalent and most quadrivalent (i.e., Zr, Hf) cations are not significantly affected by melt composition. The present data show that the influence of melt composition may not be neglected when modelling trace element partitioning.It is argued that it is mainly the change of coordination number and the regularity of the coordination space of trace elements in the melt structure that controls partition coefficients in our experiments. Furthermore, our data also show that the substitution mechanism by which trace elements are incorporated into titanite crystals may be of additional importance in this context.  相似文献   

6.
The Twin Peaks epithermal gold deposit, located in East Junggar, China, is hosted by the late Paleozoic Kulankazigan island-arc complex. The deposit is structurally controlled by the extensional radial fractures associated with development of the Early Carboniferous Twin Peaks volcanic dome. It is stratigraphically restricted to the upper Batamayineishan Formation, which is subdivided into two units: the lower andesite unit that contains the ore bodies, and the upper rhyolite unit. Four hydrothermal alteration zones have been identified in both East and West Zones of the deposit. Each zone is characterized by a highly silicified core, and then there is an outward progression through adularia-sericite, argillic, and propylitic zones. The presence of adularia and sericite, in addition to the sulfide mineral association, suggests that the gold deposit is of the "adularia-sericite" or "low sulfidation" type. The East Zone ore body is offset by post-mineralization, high-angle reverse faults that strike parallel to the zone and small-scale, strike-slip faults that strike perpendicular to the zone.  相似文献   

7.
We propose a theory for crystal-melt trace element partitioning that considers the energetic consequences of crystal-lattice strain, of multi-component major-element silicate liquid mixing, and of trace-element activity coefficients in melts. We demonstrate application of the theory using newly determined partition coefficients for Ca, Mg, Sr, and Ba between pure anorthite and seven CMAS liquid compositions at 1330 °C and 1 atm. By selecting a range of melt compositions in equilibrium with a common crystal composition at equal liquidus temperature and pressure, we have isolated the contribution of melt composition to divalent trace element partitioning in this simple system. The partitioning data are fit to Onuma curves with parameterizations that can be thermodynamically rationalized in terms of the melt major element activity product (aAl2O3)(aSiO2)2 and lattice strain theory modeling. Residuals between observed partition coefficients and the lattice strain plus major oxide melt activity model are then attributed to non-ideality of trace constituents in the liquids. The activity coefficients of the trace species in the melt are found to vary systematically with composition. Accounting for the major and trace element thermodynamics in the melt allows a good fit in which the parameters of the crystal-lattice strain model are independent of melt composition.  相似文献   

8.
Pb contents were determined by isotope dilution in separated glass, sanidine, and plagioclase from 18 rocks ranging in composition from basalt to rhyolite. These data indicate that Pb is partitioned into silicate melt relative to plagioclase, but is equally distributed between melt and sanidine. Plagioclase/glass distribution coefficients increase from 0.1 to 0.7 in going from basalt to rhyolite. This relationship suggests that the distribution coefficient is dependent upon bulk composition, temperature, or both. Sanidine/glass distribution coefficients are close to unity in rocks ranging in composition from quartz latite to rhyolite. The variation in Pb contents in a natural magma series from Craters of the Moon National Monument, Idaho, indicates that minerals (olivine, plagioclase, magnetite, apatite and clinopyroxene) fractionated from these magmas all have very low crystal/liquid distribution coefficients for Pb.  相似文献   

9.
An indirect method was used to study Na, K, Rb, Cs, Sr and Ba partition coefficients between crystals and silicate melt. Equilibria between a hydrothermal solution and the melt at 800°C and 2 kb and between a hydrothermal solution and crystals at 750°C and 2 kb were separately achieved.For major element partitioning (Na and K), the results obtained here are in good agreement with those of Tuttle and Bowen (1958) which allow us to follow crystal evolution during a fractional crystallization process where the growth of zoned crystals takes place.For minor elements Rb, Cs, Sr, Ba, melt/aqueous solution partition coefficients depend on Na/K as well as the silica content of the melt. These effects are rather small for Rb and Cs, but are much more important for the alkaline earths. The feldspar/aqueous solution partition coefficients also depend on Na/K.The variations of the partition coefficients feldspar/melt are complex in the part of the Qz-Ab-Or diagram located below the cotectic line.During fractional crystallization following the Rayleigh law (assuming that there are no kinetic phenomena) Sr (D > 10) is almost totally removed from the melt in the early stages whereas Cs (D < 0.1) remains in the melt during the whole process. Rb and Ba have partition coefficients closer to unity. The variation of these coefficients, due to changes in bulk composition of liquid and crystals during fractional crystallization, can lead to complex zoning with possible concentration maxima at some stages. Similar phenomena can be expected in non-ideal natural solid solutions, even if no discontinuities can be detected in the physicochemical evolution of the parent magma.  相似文献   

10.
In an investigation of Sm, Sc, Sr, and Ti partitioning between diopside and silicate melt, Rayet al. (1983) showed that the compositional dependence of multicomponent exchange equilibria can not be eliminated by the application of the melt model of Bottinga and Weill (1972), and that the propagation of analytical error is an important contributor in the observed internal error in the calculated equilibria for those exchange reactions. We can demonstrate that the compositional dependence of single component distribution coefficients can be reduced below analytical error by the application of the two-lattice melt model first reported by Nielsenand Drake (1979) in a study of major element partitioning between pyroxene and melt. This model was later used for the calculation of major, minor and trace element partitioning by Nielsen and Dungan (1983). The two-lattice model is a modified version of the Bottinga-Weill model used by Drake (1976) for plagioclase-melt equilibria, and differs from that model in the assumed role of Al. The Nielsen and Dungan (1983) model has been modified here to assume Ti to mix in silicate melts as a network former. Single component distribution coefficients were used in place of multicomponent reactions in order to reduce the propagated analytical and experimental error.  相似文献   

11.
Our current lack of understanding of the partitioning behavior of Sc, Y and the REE (rare-earth elements) can be attributed directly to the lack of a sufficiently large or chemically diverse experimental data set. To address this problem, we conducted a series of experiments using several different natural composition lavas, doped with the elements of interest, as starting compositions. Microprobe analyses of orthopyroxene, pigeonite, olivine, magnetite, ilmenite and co-existing glasses in the experimental charges were used to calculate expressions that describe REE partitioning as a function of a variety of system parameters. Using expressions that represent mineral-melt reactions (versus element ratio distribution coefficients) it is possible to calculate terms that express low-Ca pyroxene-melt partitioning behavior and are independent of both pyroxene and melt composition. Compositional variations suggest that Sc substitution in olivine involves either a paired substitution with Al or, more commonly, with vacancies. The partitioning of Sc is dependent both on melt composition and temperature. Our experimentally determined olivine-melt REE Ds (partition coefficients) are similar to, but slightly higher than those reported by McKay (1986) and support their conclusions that olivines are strongly LREE depleted. Y and REE mineral/melt partition coefficients for magnetite range from 0.003 for La to 0.02 for Lu. Ilmenite partition coefficients range from 0.007 for La to 0.029 for Lu. These experimental values are two orders of magnitude lower than many of the published values determined by phenocryst/matrix separation techniques.  相似文献   

12.
Partition coefficients between olivine and melt at upper mantle conditions, 3 to 14 GPa, have been determined for 27 trace elements (Li, Be, B, Na, Mg, Al, Si, P, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Rb, Sr, Y, Zr, Cs, Ba, La and Ce) using secondary-ion mass-spectrometry (SIMS) and electron-probe microanalysis (EPMA). The general pattern of olivine/melt partitioning on Onuma diagrams resembles those reported previously for natural systems. This agreement strongly supports the argument that partitioning is under structural control of olivine even at high pressure. The partition coefficients for mono- and tri-valent cations show significant pressure dependence, both becoming larger with pressure, and are strongly correlated with coupled substitution into cation sites in the olivine structure. The dominant type of trace element substitution for mono- and tri-valent cations into olivine changes gradually from (Si, Mg)↔(Al, Cr) at low pressure to (Si, Mg)↔(Al, Al) and (Mg, Mg)↔(Na, Al) at high pressure. The change in substitution type results in an increase in partition coefficients of Al and Na with pressure. An inverse correlation between the partition coefficients for divalent cations and pressure has been observed, especially for Ni, Co and Fe. The order of decreasing rate of partition coefficient with pressure correlates to strength of crystal field effect of the cation. The pressure dependence of olivine/melt partitioning can be attributed to the compression of cation polyhedra induced by pressure and the compensation of electrostatic valence by cation substitution. Received: March 6, 1997 / Revised, accepted: March 12, 1998  相似文献   

13.
Experiments in the systems diopside-albite (Di-Ab) and diopside-albite-dolomite (Di-Ab-Dmt), doped with a wide range of trace elements, have been used to characterise the difference between clinopyroxene-silicate melt and clinopyroxene-carbonate melt partitioning. Experiments in Di-Ab-Dmt yielded clinopyroxene and olivine in equilibrium with CO2-saturated dolomitic carbonate melt at 3 GPa, 1375 °C. The experiments in Di-Ab were designed to bracket those conditions (3 GPa, 1640 °C and 0.8 GPa, 1375 °C), and so minimise the contribution of differential temperature and pressure to partitioning. Partition coefficients, determined by SIMS analysis of run products, differ markedly for some elements between Di-Ab and Di-Ab-Dmt systems. Notably, in the carbonate system clinopyroxene-melt partition coefficients for Si, Al, Ga, heavy REE, Ti and Zr are higher by factors of 5 to 200 than in the silicate system. Conversely, partition coefficients for Nb, light REE, alkali metals and alkaline earths show much less fractionation (<3). The observed differences compare quantitatively with experimental data on partitioning between immiscible carbonate and silicate melts, indicating that changes in melt chemistry provide the dominant control on variation in partition coefficients in this case. The importance of melt chemistry in controlling several aspects of element partitioning is discussed in light of the energetics of the partitioning process. The compositions of clinopyroxene and carbonate melt in our experiments closely match those of near-solidus melts and crystals in CMAS-CO2 at 3 GPa, suggesting that our partition coefficients have direct relevance to melting of carbonated mantle lherzolite. Melts so produced will be characterised by elevated incompatible trace element concentrations, due to the low degrees of melting involved, but marked depletions of Ti and Zr, and fractionated REE patterns. These are common features of natural carbonatites. The different behaviour of trace elements in carbonate and silicate systems will lead to contrasted styles of trace element metasomatism in the mantle. Received: 15 July 1999 / Accepted: 18 February 2000  相似文献   

14.
Melt inclusions in quartz phenocrysts from a single clast of pumice near the base of the plinian pumice fall of the Bishop Tuff were studied to test ideas concerning separation of melt and crystals in silicic magmas. Ten analyzed inclusions from the pumice clast are of high silica rhyolite composition with very low contents of the highly compatible elements Ba, Sr, and Eu, consistent with extensive fractionation. The concentrations of U, La, Ce, Mg, and Ca of these ten melt inclusions vary considerably as determined by ion microprobe. Petrologic considerations indicate that uranium is an incompatible element with a maximum bulk partition coefficient D of about 0.2 and that the evolution of the uranium content of the melt was controlled by crystallization of the magma. A minimum of 33 wt% perfect fractional crystallization is required to explain the observed range in uranium. However, only 17 wt% crystals occurred in the pumice clast. The greater calculated fraction of crystals requires significant separation of crystals and melt before the eruption of the plinian pumice fall in spite of the fact that crystal mixing (settling, etc.) did not occur in the Bishop magma.  相似文献   

15.
This experimental study examines the mineral/melt partitioning of incompatible trace elements among high-Ca clinopyroxene, garnet, and hydrous silicate melt at upper mantle pressure and temperature conditions. Experiments were performed at pressures of 1.2 and 1.6 GPa and temperatures of 1,185 to 1,370 °C. Experimentally produced silicate melts contain up to 6.3 wt% dissolved H 2O, and are saturated with an upper mantle peridotite mineral assemblage of olivine+orthopyroxene+clinopyroxene+spinel or garnet. Clinopyroxene/melt and garnet/melt partition coefficients were measured for Li, B, K, Sr, Y, Zr, Nb, and select rare earth elements by secondary ion mass spectrometry. A comparison of our experimental results for trivalent cations (REEs and Y) with the results from calculations carried out using the Wood-Blundy partitioning model indicates that H 2O dissolved in the silicate melt has a discernible effect on trace element partitioning. Experiments carried out at 1.2 GPa, 1,315 °C and 1.6 GPa, 1,370 °C produced clinopyroxene containing 15.0 and 13.9 wt% CaO, respectively, coexisting with silicate melts containing ~1–2 wt% H 2O. Partition coefficients measured in these experiments are consistent with the Wood-Blundy model. However, partition coefficients determined in an experiment carried out at 1.2 GPa and 1,185 °C, which produced clinopyroxene containing 19.3 wt% CaO coexisting with a high-H 2O (6.26±0.10 wt%) silicate melt, are significantly smaller than predicted by the Wood-Blundy model. Accounting for the depolymerized structure of the H 2O-rich melt eliminates the mismatch between experimental result and model prediction. Therefore, the increased Ca 2+ content of clinopyroxene at low-temperature, hydrous conditions does not enhance compatibility to the extent indicated by results from anhydrous experiments, and models used to predict mineral/melt partition coefficients during hydrous peridotite partial melting in the sub-arc mantle must take into account the effects of H 2O on the structure of silicate melts.  相似文献   

16.
Calcium- and aluminum-rich inclusions (CAIs), occurring in chondritic meteorites and considered the oldest materials in the solar system, can provide critical information about the environment and time scale of creation of planetary materials. However, interpretation of the trace element and isotope compositions of CAIs, particularly the light elements Li, Be, and B, is hampered by the lack of constraint on melilite-melt and spinel-melt partition coefficients. We determined melilite-melt and spinel-melt partition coefficients for 21 elements by performing controlled cooling rate (2 °C/h) experiments at 1 atmosphere pressure in sealed platinum capsules using a synthetic type B CAI melt. Trace element concentrations were measured by secondary ion mass spectrometry (SIMS) and/or laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Melilites vary only slightly in composition, ranging from Åk31-43. Results for the partitioning of trace elements between melilite and melt in three experiments and between spinel and melt in two experiments show that partition coefficients are independent of trace element concentration, are in good agreement for different analytical techniques (SIMS and LA-ICP-MS), and are in agreement with previous measurements in the literature. Partition coefficients between intermediate composition melilites and CAI melt are the following: Li, 0.5; Be, 1.0; B, 0.22; Rb, 0.012; Sr, 0.68; Zr, 0.004; Nb, 0.003; Cs, 0.002; Ba, 0.018; La, 0.056; Nd, 0.065; Sm, 0.073; Eu, 0.67; Er, 0.037; Yb, 0.018; Hf, 0.001; Ta, 0.003; Pb, 0.15; U, 0.001; Th, 0.002. Site size energetics analysis is used to assess isovalent partitioning into the different cation sites. The Young’s modulus deduced from +2 cations partitioning into the melilite X site agrees well with the bulk modulus of melilite based on X-ray diffraction methods. The changes in light element partitioning as melilite composition varies are predicted and used in several models of fractional crystallization to evaluate if the observed Li, Be, and B systematics in Allende CAI 3529-41 are consistent with crystallization from a melt. Models of crystallization agree reasonably well with observed light element variations in areas previously interpreted to be unperturbed by secondary processes [Chaussidon, M., Robert, F., McKeegan, K.D., 2006. Li and B isotopic variations in an Allende CAI: Evidence for the in situ decay of short-lived 10Be and for the possible presence of the short-lived nuclide 7Be in the early solar system. Geochim. Cosmochim. Acta70, 224-245], indicating that the trends of light elements could reflect fractional crystallization of a melt. In contrast, areas interpreted to have been affected by alteration processes are not consistent with crystallization models.  相似文献   

17.
G. Dobosi  G. A. Jenner   《Lithos》1999,46(4):14-749
Clinopyroxene megacrysts in alkali basalts are an important source of information about the evolution of magmatic systems at depth. In this study, we have undertaken a detailed examination of the trace element contents in a suite of megacrysts from 2.5 Ma old alkali basalts in the Nógrád volcanic province of Hungary and Slovakia. The megacrysts range in composition from Mg-rich and in equilibrium with their host magmas, to those that are Fe-rich and must have evolved in more fractionated magmas. The conditions of crystallization of these megacrysts, as calculated from the AlVI/AlIV ratios, suggests they all formed at about 30 km, or the crust–mantle boundary in this area. Using the most magnesian megacrysts and compositions of the host lavas, we have calculated the partition coefficients for a range of trace elements. However, the trace element contents in the megacrysts show a systematic variation with major element composition. Moreover, the rate of increase or change in the trace element concentrations is not consistent with models involving constant or steady state partition coefficients. Using a series of assumptions and models, we hypothesize that the partition coefficients between clinopyroxene and melt change substantially during the magmatic evolution of the system. This change is not constant for each element group, with the high field strength elements showing the most substantial increases. Electrostatic charge balance may have been the most important factor in controlling the mineral/melt partitioning.  相似文献   

18.
The effect of silicate liquid structure upon mineral-liquid partitioning has been investigated by determining element partitioning data for coexisting immiscible granitic and ferrobasaltic magmas. The resulting elemental distribution patterns may be interpreted in terms of the relative states of polymerization of the coexisting magmas. Highly charged cations (REE, Ti, Fe, Mn, etc.) are enriched in the ferrobasaltic melt. The ferrobasaltic melt is relatively depolymerized due to its low SiO ratio. This allows highly charged cations to obtain stable coordination polyhedra of oxygen within the ferrobasaltic melt. The granitic melt is a highly polymerized network structure in which Al can occupy tetrahedral sites in copolymerization with Si. The substitution of Al+3 for Si+4 produces a local charge imbalance in the granitic melt which is satisfied by a coupled substitution of alkalis, thus explaining the enrichment of low charge density cations, the alkalis, in the granitic melt. P2O5 increases the width of the solvus and, therefore, the values of the distribution coefficients of the trace elements. This effect is attributed to complexing of metal cations with PO4?3 groups in the ferrobasaltic melt.The values of ferrobasalt-granite liquid distribution coefficients are reflected in distribution coefficients for a mineral and melts of different compositions. The mineral-liquid distribution coefficient for a highly charged cation is greater for a mineral coexisting with a highly polymerized melt (granite) than it is for that same mineral and a depolymerized melt (ferrobasalt). The opposite is true for low charge density cations. Mineralliquid and liquid-liquid distribution coefficients determined for the REE's indicate that fractionated REE patterns are due to mineral selectivity and not the state of polymerization of the melt.  相似文献   

19.
The Iceland Deep Drilling Project Well 1 was designed as a 4- to 5-km-deep exploration well with the goal of intercepting supercritical hydrothermal fluids in the Krafla geothermal field, Iceland. The well unexpectedly drilled into a high-silica (76.5 % SiO2) rhyolite melt at approximately 2.1 km. Some of the melt vesiculated while extruding into the drill hole, but most of the recovered cuttings are quenched sparsely phyric, vesicle-poor glass. The phenocryst assemblage is comprised of titanomagnetite, plagioclase, augite, and pigeonite. Compositional zoning in plagioclase and exsolution lamellae in augite and pigeonite record changing crystallization conditions as the melt migrated to its present depth of emplacement. The in situ temperature of the melt is estimated to be between 850 and 920 °C based on two-pyroxene geothermometry and modeling of the crystallization sequence. Volatile content of the glass indicated partial degassing at an in situ pressure that is above hydrostatic (~16 MPa) and below lithostatic (~55 MPa). The major element and minor element composition of the melt are consistent with an origin by partial melting of hydrothermally altered basaltic crust at depth, similar to rhyolite erupted within the Krafla Caldera. Chondrite-normalized REE concentrations show strong light REE enrichment and relative flat patterns with negative Eu anomaly. Strontium isotope values (0.70328) are consistent with mantle-derived melt, but oxygen and hydrogen isotope values are depleted (3.1 and ?118 ‰, respectively) relative to mantle values. The hydrogen isotope values overlap those of hydrothermal epidote from rocks altered by the meteoric-water-recharged Krafla geothermal system. The rhyolite melt was emplaced into and has reacted with a felsic intrusive suite that has nearly identical composition. The felsite is composed of quartz, alkali feldspar, plagioclase, titanomagnetite, and augite. Emplacement of the rhyolite magma has resulted in partial melting of the felsite, accompanied locally by partial assimilation. The interstitial melt in the felsite has similar normalized SiO2 content as the rhyolite melt but is distinguished by higher K2O and lower CaO and plots near the minimum melt composition in the granite system. Augite in the partially melted felsite has re-equilibrated to more calcic metamorphic compositions. Rare quenched glass fragments containing glomeroporphyritic crystals derived from the felsite show textural evidence for resorption of alkali feldspar and quartz. The glass in these fragments is enriched in SiO2 relative to the rhyolite melt or the interstitial felsite melt, consistent with the textural evidence for quartz dissolution. The quenching of these melts by drilling fluids at in situ conditions preserves details of the melt–wall rock interaction that would not be readily observed in rocks that had completely crystallized. However, these processes may be recognizable by a combination of textural analysis and in situ analytical techniques that document compositional heterogeneity due to partial melting and local assimilation.  相似文献   

20.
Usually it is assumed that the partitioning of trace elements into titanite in metaluminous granitoid plutonic environments takes place under equilibrium conditions and that compositional zoning is due solely to progressive changes in melt chemistry and/or mineral/melt partition coefficients. Examination of titanites from a variety of Caledonian metaluminous granitoids and related rocks has revealed that sector zoning is present, indicating disequilibrium partitioning. The sector zoning in titanites is defined principally by the distribution of the rare earth elements (REE), Y, Nb, Al and Fe. The REE, Y and Nb preferentially occur within the minor (100) sectors relative to the morphologically important (111) sectors. The reverse is true of Al and Fe which preferentially occur within the (111) sectors relative to the (100) sectors. The patterns of sector zoning are complicated by the fact that the relative growth rates of the various crystal faces fluctuated during growth. Sector zoning indicates that crystal-interface kinetics are responsible for the observed patterns of element partitioning. It is concluded that differences in the lateral-layerspreading rates of crystal faces bring about the sector zoning. The results have implications for the use of trace element partition coefficients in the modelling of fractionation processes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号