首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
毫秒脉冲星的自转频率非常稳定,提供了一种独立的基于遥远自然天体并能持续数百万乃至数十亿年的时间基准,具有稳定性强、运行时间长、服务范围广等特点.为了减弱毫秒脉冲星计时观测中各种高斯噪声对脉冲星时的影响,研究了一种基于双谱滤波的综合脉冲星时构建算法,处理分析了国际脉冲星计时阵(International Pul-sar Timing Array,IPTA)最新发布的4颗毫秒脉冲星(PSR J0437-4715、J0613-0200、J1713+0747和J1909-3744)的观测数据,分析了不同时间尺度综合脉冲星时的稳定性,并与构成国际原子时(International Atomic Time,TAI)的4家授时单位原子钟稳定性进行了比较.结果表明:双谱滤波算法能够较好地抑制观测噪声,提高综合脉冲星时的稳定性.相比于经典加权算法,综合脉冲星时1 yr、10 yr稳定度从7.77×10-14、8.56×10-16分别提高到1.50×10-14、3.50×10-16,单脉冲星时稳定性的提升也类似.同时发现,综合脉冲星时稳定性在5 yr及以上时间尺度上优于原子钟稳定性,可用于改善当前原子时的长期稳定性.  相似文献   

2.
毫秒脉冲星定时研究进展   总被引:1,自引:0,他引:1  
毫秒脉冲星守时的理论和方法研究己取得重要进展,利用现有2颗毫秒脉冲星约10yr的计时观测资料分析得到的 TAI-PT,其长期稳定度为 2×10-14。采用合适的长期稳定度算法,由多颗毫秒脉冲星计时观测可以建立综合脉冲星时间尺度。它可以成为与原子时系统比较的重要手段,并对原子时长期稳定度的改进做出贡献。介绍了该领域研究的基本状况,重点对毫秒脉冲星守时的理论方法,综合脉冲星时间及与原子时的关系等进行了讨论和评述。对由双星系统内毫秒脉冲星的轨道运动定义的双星脉冲星时也做了介绍。  相似文献   

3.
The pulsar time defined by a single pulsar is affected by many kinds of noise sources. Its short-term and long-term degrees of stability are both not good enough. In order to weaken the influence of these noise sources on the single pulsar time, an appropriate algorithm can be adopted to make a synthesis of many single pulsar times, then the ensemble pulsar time is obtained, thereby increasing the long-term degree of stability of the ensemble pulsar time. In this article four kinds of algorithms of the ensemble pulsar time are introduced, i.e., the classical weighting algorithm, wavelet analysis algorithm, Wiener filtering algorithm and Wiener filtering algorithm in wavelet domain. These four algorithms are respectively applied to the timing residuals obtained from the observation of two millisecond pulsars, PSR B1855+09 and PSR B1937+21 made at the Arecibo Astronomical Observatory, and comparisons are carried out.  相似文献   

4.
由单颗脉冲星定义的脉冲星时受多种噪声源的影响,其短期和长期稳定度都不够好.为了削弱这些噪声源对单脉冲星时的影响,可以采取合适的算法对多个单脉冲星时进行综合得到综合脉冲星时,从而提高综合脉冲星时的长期稳定度.文中介绍4种综合脉冲星时算法:经典加权算法、小波分析算法、维纳滤波算法和小波域中的维纳滤波算法,将这4种算法分别应用于Arecibo天文台对两颗毫秒脉冲星PSR B1855+09和PSRB1937+21观测得到的计时残差并作出比较.  相似文献   

5.
仲崇霞  杨廷高 《天文学报》2007,48(2):228-238
由单脉冲星定义的脉冲星时受几种噪声源的影响,为削弱这些影响得到一种更稳定的时间尺度,采取将多颗脉冲星定义的单脉冲星时进行综合的分析方法得到综合脉冲星时.用两种方法:经典加权算法和小波分解算法,对PSRB1855 09和PSR B1937 21两颗脉冲星进行综合计算并做出比较,经典加权算法无法兼顾脉冲星不同频率上的稳定度,而用小波分析的方法对PSR B1855 09和PSR B1937 21两颗脉冲星进行综合,能够有效抑制不同频率上噪声的影响,达到更好的效果.  相似文献   

6.
基于实测数据的综合脉冲星时研究   总被引:1,自引:0,他引:1  
介绍了脉冲星计时在几个重要方面的应用,给出了脉冲星时间尺度的简要定义.基于澳大利亚PARKES天文台的毫秒脉冲星实测计时数据,建立了基于4颗毫秒脉冲星的综合脉冲星时,并将其稳定度σz与原子时进行比较,最后分析了影响综合脉冲星时的几个重要因素及其对脉冲星计时精度的影响与应用.  相似文献   

7.
The applications of pulsar timing to several important aspects are introduced and a skeletal definition of the pulsar time scale is given. By taking advantage of the observational timing data of millisecond pulsars obtained at the Parkes Astronomical Observatory, Australia, the ensemble pulsar time based on 4 millisecond pulsars is built up, the comparison of its stability σz, with that of the atomic time is made, and finally a few of important factors which affect the ensemble pulsar time, as well as their influences on the pulsar timing accuracy and application are analyzed.  相似文献   

8.
脉冲星时稳定度及可能应用   总被引:2,自引:0,他引:2  
给出了毫秒脉冲星长期计时观测最新结果和脉冲星时与原子时频率稳定度的比较。指出脉冲星时频率稳定度的提高受到计时观测误差的限制,讨论了提高毫秒脉冲星计时观测精度的方法。随着脉冲星计时阵的实施,脉冲星时的应用已为期不远。可能的应用包括毫秒脉冲星与原子钟结合守时、建立综合脉冲星时和用脉冲星计时阵检测原子时误差等方面。  相似文献   

9.
脉冲星时间特征和多星计时观测   总被引:1,自引:0,他引:1  
在评介脉冲星时研究发展趋势的基础上,讨论了基于毫秒脉冲星自转的脉冲星时间的短期特征和长期稳定度,并对影响其稳定度的因素作了初步分析.50m射电望远镜计时观测的目的之一就是综合脉冲星时研究.对于50m望远镜计时观测的选星和由多星观测进行综合脉冲星时研究中的数据分析问题进行了讨论.  相似文献   

10.
The long-term precise timing of Galactic millisecond pulsars holds great promise for measuring the long-period (months to years) astrophysical gravitational waves. Several gravitational-wave observational programs, called Pulsar Timing Arrays (PTA), are being pursued around the world.
Here, we develop a Bayesian algorithm for measuring the stochastic gravitational-wave background (GWB) from the PTA data. Our algorithm has several strengths: (i) it analyses the data without any loss of information; (ii) it trivially removes systematic errors of known functional form, including quadratic pulsar spin-down, annual modulations and jumps due to a change of equipment; (iii) it measures simultaneously both the amplitude and the slope of the GWB spectrum and (iv) it can deal with unevenly sampled data and coloured pulsar noise spectra. We sample the likelihood function using Markov Chain Monte Carlo simulations. We extensively test our approach on mock PTA data sets and find that the algorithm has significant benefits over currently proposed counterparts. We show the importance of characterizing all red noise components in pulsar timing noise by demonstrating that the presence of a red component would significantly hinder the detection of the GWB.
Lastly, we explore the dependence of the signal-to-noise ratio on the duration of the experiment, number of monitored pulsars and the magnitude of the pulsar timing noise. These parameter studies will help formulate observing strategies for the PTA experiments.  相似文献   

11.
Relic gravitational waves(RGWs), a background originating during inflation, would leave imprints on pulsar timing residuals. This makes RGWs an important source for detection of RGWs using the method of pulsar timing. In this paper, we discuss the effects of RGWs on single pulsar timing, and quantitatively analyze the timing residuals caused by RGWs with different model parameters. In principle, if the RGWs are strong enough today, they can be detected by timing a single millisecond pulsar with high precision after the intrinsic red noises in pulsar timing residuals are understood, even though simultaneously observing multiple millisecond pulsars is a more powerful technique for extracting gravitational wave signals. We correct the normalization of RGWs using observations of the cosmic microwave background(CMB), which leads to the amplitudes of RGWs being reduced by two orders of magnitude or so compared to our previous works. We obtained new constraints on RGWs using recent observations from the Parkes Pulsar Timing Array, employing the tensor-to-scalar ratio r = 0.2 due to the tensor-type polarization observations of CMB by BICEP2 as a reference value, even though its reliability has been brought into question. Moreover, the constraints on RGWs from CMB and Big Bang nucleosynthesis will also be discussed for comparison.  相似文献   

12.
An algorithm of the ensemble pulsar time based on the optimal Wiener filtration method has been constructed. This algorithm allows the separation of the contributions to the post-fit pulsar timing residuals of the atomic clock and the pulsar itself. Filters were designed using the cross- and auto-covariance functions of the timing residuals. The method has been applied to the timing data of millisecond pulsars PSR B1855+09 and B1937+21 and allowed the filtering out of the atomic-scale component from the pulsar data. Direct comparison of the terrestrial time TT(BIPM06) and the ensemble pulsar time PTens revealed that the fractional instability of TT(BIPM06)−PTens is equal to  σ z = (0.8 ± 1.9) × 10−15  . Based on the  σ z   statistics of TT(BIPM06)−PTens, a new limit of the energy density of the gravitational wave background was calculated to be equal to  Ωg h 2∼ 3 × 10−9  .  相似文献   

13.
Pulsar timing uses planetary ephemerides to convert the measured pulse arrival time at an observatory to the arrival time at the Solar System barycenter(SSB). Since these planetary ephemerides cannot be perfect, a method of detecting the associated errors based on a pulsar timing array is developed. By using observations made by an array of 18 millisecond pulsars from the Parkes Pulsar Timing Array, we estimated the vector uncertainty from the Earth to the SSB of JPL DE421, which reflects the offset of the ephemeris origin with respect to the ideal SSB, in different piecewise intervals of pulsar timing data, and found consistent results. To investigate the stability and reliability of our method, we divided all the pulsars into two groups. Both groups yield largely consistent results, and the uncertainty of the Earth-SSB vector is several hundred meters, which is consistent with the accuracy of JPL DE421. As an improvement in the observational accuracy, pulsar timing will be helpful to improve the solar system ephemeris in the future.  相似文献   

14.
The pulsar time defined by a single pulsar is affected by several noises and in order to weaken their effects and acquire a much more stable time scale we define a synthetic pulsar time from many single pulsar times. Synthesis of the two pulsars, PSR B1855 + 09 and PSR B1937 + 21 is implemented by two methods: the classical weighting algorithm and the wavelet decomposition algorithm. The results are compared. The classical weighting algorithm is unable to take into consideration the different degrees of stability at different frequencies while the wavelet algorithm can, and thereby get better results.  相似文献   

15.
Power spectra of the timing noise observed in 18 southern pulsars have been derived using a novel technique, based on the CLEAN algorithm. Most of the spectra are well described by a single- or double-component power-law model. Some of these spectra can be interpreted in the context of one or more of the current timing noise models. The results combined with those obtained from the time-domain analyses of the timing activity in these pulsars are used to assess the viability of the various theoretical models of pulsar timing noise.  相似文献   

16.
利用脉冲星钟模型能高精度地预报脉冲星脉冲到达太阳系质心的时间。基于脉冲星时、空参考架可实现各类空间飞行器的自主导航。讨论了脉冲星钟的模型和脉冲星导航系统的框架结构,描述了脉冲星导航的基本原理和算法。指出脉冲星导航系统对脉冲星脉冲到达探测器时刻的测量精度,是决定空间飞行器位置解算精度的关键因素。脉冲星导航观测采用的原子钟如果足够稳定,则空间飞行器位置的解算方法可以简化。在脉冲星导航系统计时观测精度达到或优于几十微秒量级时,脉冲星视差、相对论效应的影响是不可忽略的。对脉冲星导航系统开发设计中的关键技术和进一步研究的主要问题进行了初步分析和讨论。  相似文献   

17.
毫秒脉冲星计时方法的研究进展和前景   总被引:5,自引:0,他引:5  
介绍脉冲星的时间频率特征,脉冲星时间研究的意义,毫秋脉冲星计时理论方法和技术方面的研究进展,对其中的关键问题给予讨论,并对其发展前景进行了展望。  相似文献   

18.
介绍脉冲星的时间频率特征,脉冲星时间研究的意义,毫秒脉冲星计时理论方法和技术方面的研究进展,对其中的关键问题给予讨论.并对其发展前景进行了展望.  相似文献   

19.
We present an analysis of the variations seen in the dispersion measures (DMs) of 20-ms pulsars observed as part of the Parkes Pulsar Timing Array project. We carry out a statistically rigorous structure function analysis for each pulsar and show that the variations seen for most pulsars are consistent with those expected for an interstellar medium characterized by a Kolmogorov turbulence spectrum. The structure functions for PSRs J1045−4509 and J1909−3744 provide the first clear evidence for a large inner scale, possibly due to ion–neutral damping. We also show the effect of the solar wind on the DMs and show that the simple models presently implemented into pulsar timing packages cannot reliably correct for this effect. For the first time we clearly show how DM variations affect pulsar timing residuals and how they can be corrected in order to obtain the highest possible timing precision. Even with our presently limited data span, the residuals (and all parameters derived from the timing) for six of our pulsars have been significantly improved by correcting for the DM variations.  相似文献   

20.
We present the results of a high-precision timing campaign directed at the binary millisecond pulsar J1600−3053. Submicrosecond pulsar timing has long been the domain of bright, low dispersion measure millisecond pulsars or large diameter telescopes. This experiment, conducted using the Parkes radio telescope in New South Wales, Australia, and utilizing the latest baseband recording hardware, has allowed this pulsar, although distant and faint, to present residuals to a model of its spin behaviour of 650 ns over a period of more than 2 yr. We have also constrained the orbital inclination via Shapiro delay to be between 59° and 70° to 95 per cent confidence and obtained a scintillation velocity measurement indicating a transverse velocity less than 84 km s−1. This pulsar is demonstrating remarkable stability comparable to, and in most cases improving upon, the very best long-term pulsar timing experiments. If this stability is maintained, the current limits on the energy density of the stochastic gravitational wave background will be reached in four more years.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号