首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The transport of fine-grained particles in estuarine and coastal waters is influenced by flocculation processes (aggregation and floc breakup). As a consequence, the particle size varies with time in the water column, and can be orders of magnitude larger than those of primary particles. In this study the variations in floc size is simulated using a size-resolved method, which approximates the real size distribution of particles by a range of size bins and solves a mass balance equation for each bin. To predict the size distribution both aggregation and breakup processes are included. The conventional rectilinear aggregation kernel is used which considers both turbulent shear and differential settling. The breakup kernel accounts for the fractal dimension of the flocs. A flocculation simulation is compared to the settling column lab experiments of Winterwerp [1998. A simple model for turbulence induced flocculation of cohesive sediment, Journal of Hydraulic Research, 36, 309–326], and a one-dimensional sediment transport model is verified with the observed variations in floc size and concentration over tidal cycles in a laboratory flume experiment of Bale et al. [2002. Direct observation of the formation and break-up of aggregates in an annular flume using laser reflectance particle sizing. In: Winterwerp, J.C., Kranenburg, C. (Eds.), Fine Sediment Dynamics in the Marine Environment. Elsevier, pp. 189–201]. The numerical simulations compare qualitatively and quantitatively well with the laboratory measurements, and the analysis of the two simulation results indicates that the median floc size can be correlated to the sediment concentration and Kolmogorov microscale. Sensitivity studies are conducted to explore the role of settling velocity and erosion rate. The results are not sensitive towards the formulation of settling velocity, but the parameterization of erosion flux is important. The studies show that for predicting the sediment deposition flux it is crucial to include flocculation processes.  相似文献   

2.
In natural waters,exopolymers or extracellular polymeric substances(EPS) exuded by microorganisms interact with clay particles,resulting in the flocculation of clays and hence alteration to the properties of suspended cohesive sediments.To investigate and further understand how neutral EPS affect cohesive sediment transport and the final sediment yield,an experimental study was conducted on laboratory-prepared clay and guar gum(used as an analog for neutral EPS) suspensions to characterize EPS-induced flocculation and the settling velocity of resultant floes.Four different clays consisting of kaolinite,illite,Ca-montmorillonite,and Na-montmorillonite were studied to examine the influence of different layer charges on clay flocculation induced by neutral EPS.Floc size was determined by a laser particle size analyzer,and settling velocity estimated by analyzing the time-series floc settling images captured by an optical microscope.Results indicate that neutral EPS promote clay-EPS flocculation for all four clays with the particle/floc size significantly increased from～0.1-60μm to as large as～600μm.Clays’ layer charge has a profound influence on the clay-EPS flocculation.With the same floc size,the settling velocity of clay-EPS flocs is typically smaller than that of pure clay flocs,which is attributed to the reduced density of flocs caused by the EPS. However,for flocs of the same composition(e.g.pure clay or hybrid clay-EPS mixture),the settling velocity increases with size.The fractal dimension of these clay-EPS flocs estimated from settling velocity ranges from 1.39 to 1.47,which are smaller than that of pure clay flocs,indicating that these flocs are less compacted than the pure clay flocs.  相似文献   

3.
Most entrained estuarine sediment mass occurs as flocs. Parameterising flocculation has proven difficult as it is a dynamically active process dependent on a set of complex interactions between the sediment, fluid and the flow. However the natural variability in an estuary makes it difficult to study the factors that influence the behaviour of flocculation in a systematic manner. This paper presents preliminary results from a laboratory study that examined how floc properties of a natural estuarine mud from the Medway (UK), evolved in response to varying levels of suspended sediment concentration and induced turbulent shearing. The experiments utilised the LabSFLOC floc video camera system, in combination with an annular mini-flume to shear the suspended sediment slurries. The flows created in the mini-flume produced average shear stresses, at the floc sampling height, ranging from 0.01 N m−2 to a peak of 1.03 N m−2. Nominal suspended particulate matter concentrations of 100, 600 and 2000 mg l−1 were introduced into the flume. The experimental runs produced individual flocs ranging in size from microflocs of 22.2 μm to macroflocs 583.7 μm in diameter. Average settling velocities ranged from 0.01 to 26.1 mm s−1, whilst floc effective densities varied from 3.5 up to 2000 kg m−3. Low concentration and low shear stress were seen to produce an even distribution of floc mass between the macrofloc (>160 μm) and microfloc (<160 μm) fractions. As both concentration and stress rose, the proportion of macrofloc mass increased, until they represented over 80% of the suspended matter. A maximum average macrofloc settling velocity of 3.3 mm s−1 was attained at a shear stress of 0.45 N m−2. Peak turbulence conditions resulted in deflocculation, limiting the macrofloc fall velocity to only 1.1 mm s−1 and placing over 60% of the mass in the microfloc size range. A statistical analysis of the data suggests that the combined influence of both suspended concentration and turbulent shear controls the settling velocity of the fragile, low density macroflocs.  相似文献   

4.
When fine particles are involved, cohesive properties of sediment can result in flocculation and significantly complicate sediment process studies. We combine data from field observations and state-of-the-art modeling to investigate and predict flocculation processes within a hypertidal estuary. The study site is the Welsh Channel located at the entrance of the Dee Estuary in Liverpool Bay. Field data consist of measurements from a fixed site deployment during 12–22 February 2008. Grain size, suspended sediment volume concentration, and current velocity were obtained hourly from moored instruments at 1.5 m above bed. Near-bottom water samples taken every hour from a research vessel are used to convert volume concentrations to mass concentrations for the moored measurements. We use the hydrodynamic model Proudman Oceanographic Laboratory Coastal Ocean Modelling System (POLCOMS) coupled with the turbulence model General Ocean Turbulence Model (GOTM) and a sediment module to obtain three-dimensional distributions of suspended particulate matter (SPM). Flocculation is identified by changes in grain size. Small flocs were found during flood and ebb periods—and correlate with strong currents—due to breakup, while coarse flocs were present during slack waters because of aggregation. A fractal number of 2.4 is found for the study site. Turbulent stresses and particle settling velocities are estimated and are found to be related via an exponential function. The result is a simple semiempirical formulation for the fall velocity of the particles solely depending on turbulent stresses. The formula is implemented in the full three-dimensional model to represent changes in particle size due to flocculation processes. Predictions from the model are in agreement with observations for both settling velocity and SPM. The SPM fortnight variability was reproduced by the model and the concentration peaks are almost in phase with those from field data.  相似文献   

5.
Flocculation settling characteristics of mud: sand mixtures   总被引：2，自引：1，他引：1  
When natural muds become mixed with sandy sediments in estuaries, it has a direct effect on the flocculation process and resultant sediment transport regime. Much research has been completed on the erosion and consolidation of mud/sand mixtures, but very little is known quantitatively about how mixed sediments interact whilst in suspension, particularly in terms of flocculation. This paper presents the settling velocity findings from a recent laboratory study which examined the flocculation dynamics for three different mud/sand mixtures at different concentrations (0.2–5 g.l?1) and turbulent shear stresses (0.06–0.9 Pa) in a mini-annular flume. The low intrusive video-based Laboratory Spectral Flocculation Characteristics instrument was used to determine floc/aggregate properties (e.g., size, settling velocity, density and mass) for each population. Settling data was assessed in terms of macrofloc (>160 μm) and microfloc (<160 μm) settling parameters: Wsmacro and Wsmicro, respectively. For pure muds, the macroflocs are regarded as the most dominant contributors to the total depositional flux. The parameterised settling data indicates that by adding more sand to a mud/sand mixture, the fall velocity of the macrofloc fraction slows and the settling velocity of microflocs quickens. Generally, a mainly sandy suspension comprising 25% mud and 75% sand (25M:75S), will produce resultant Wsmacro which are slower than Wsmicro. The quickest Wsmicro appears to consistently occur at a higher level of turbulent shear stress (τ?～?0.6 Pa) than both the macrofloc and microfloc fractions from suspensions of pure natural muds. Flocculation within a more cohesively dominant muddy-sand suspension (i.e., 75M:25S) produced macroflocs which fell at similar speeds (±10%) to pure mud suspensions at both low (200 mg l?1) and intermediate (1 g?l?1) concentrations at all shear stress increments. Also, low sand content suspensions produced Wsmacro values that were faster than the Wsmicro rates. In summary, the experimental results of the macrofloc and microfloc settling velocities have demonstrated that flocculation is an extremely important factor with regards to the depositional behaviour of mud/sand mixtures, and these factors must be considered when modelling mixed sediment transport in the estuarine or marine environment.  相似文献   

6.
There is increasing interest in tidal wetlands as mechanisms for sustainable and long-term coastal defence. The complexities of the interaction between the deposition of suspended particulate matter (SPM) and submerged vegetation, however, is to a large extent poorly understood. Consequently, accurate parameterisation of cohesive sediment settling fluxes in these environments is a crucial requirement for the development of high-resolution numerical models of wetland morphodynamics. A novel laboratory experiment is described in which the turbulent flow structure within a canopy of the halophytic macrophyte Spartina anglica is examined, and floc characteristics quantified using a unique floc camera configuration able to measure directly the full spectral floc size (D) and settling velocity (Ws). We provide the first quantitative observations of floc characteristics from shallow (h<0.5 m), vegetated flows and investigate the potential influence that variations in vegetative density may have on flocculation, and thus depositional fluxes, in comparison to unvegetated flows.  相似文献   

7.
  相似文献   

8.
《国际泥沙研究》2020,35(2):217-226
The study of the fall velocity variation of fine sediment in estuarine areas plays an important role in determining how various factors affect the flocculation process.Previous experimental studies have focused solely on the relation between the median fall velocity and influencing factors,while in the current study,the variation of the fall velocity in quiescent water also was examined.The experimental results showed that the vertical distribution of sediment concentration was more uneven,and larger variations occurred earlier during the settling process under higher salinity and/or sediment concentration conditions.The fall velocity initially increased then decreased over time,peaking at～20 min after settling began,and stabilizing at a value similar to that in freshwater,regardless of the initial sediment concentration and salinity combinations.Along the water depth,the fall velocity increased monotonically with a gradually decreasing gradient.The median fall velocity increased then decreased with increased salinity.The salinity at which the peak fall velocity occurred depended on the initial sediment concentration.The relation between the median fall velocity and initial sediment concentration displayed an obvious two-stage pattern(i.e.,accelerated flocculation and decelerated,hindered settling) at higher salinities;whereas the maximum median fall velocity was observed at two consecutive sediment concentration values under lower salinity conditions.Finally,an empirical equation estimating the median fall velocity of cohesive fine sediment was formulated,incorporating the effects of both salinity and sediment concentration.  相似文献   

9.
《Continental Shelf Research》2007,27(3-4):309-321
In October 2000, a 100-year flood event in the Po River resulted in the formation of a fine-grained sediment deposit extending up to 10 km from the river mouth. Soon after this event, and for a subsequent period of 2 years, box cores were collected on a grid of stations off of the Po Delta to observe the evolution of the flood deposit. Using a process-based parameterization of the disaggregated inorganic grain size distribution, the evolution of the surficial sediment on the Po shelf since the 2000 flood has been interpreted in the context of particle flocculation dynamics. This method produces estimates of floc limit, the diameter at which the flux of single grains to the seabed equals the flux of flocs, and floc mass fraction, the amount of material deposited as flocs. Floc limit depends on the extent of flocculation in suspension, and floc mass fraction describes the extent of flocculation in the sediment. Immediately after the flood, these two parameters were high at stations located beneath the path of the flood plume as observed in satellite images. The occurrence of a highly flocculated deposit below the path of the plume leads to two hypotheses: (1) the high sediment concentration in the river flood plume produced extensive sediment flocculation in the plume and (2) post-depositional remobilization of sediment delivered from the plume to the seabed was limited in the relatively low-energy environment of the Po prodelta. Floc limit and floc mass fraction estimated from bottom sediment sampling 3 and 10 months after the initial sampling were lower, indicating that during normal discharge, flocculated fine-grained sediment from the Po River settles close to the mouth, leaving only a small amount of material in suspension in the plume for direct deposition onto the prodelta. These findings are consistent with laboratory studies of suspended sediment that show that sediment concentration and turbulent energy exert dominant control on the extent of flocculation and the loss of sediment from suspension.  相似文献   

10.
The purpose of this paper is to establish a relation between a few measurable quantities (the so-called ζ potential, organic matter content, and shear rate) and the flocculation behavior of mud. The results obtained with small-scale flocculation experiments (mixing jar) are compared to results of large-scale experiments (settling column). The mud used for all experiments has been collected in October 2007 in the lower Western Schelde, near Antwerp, Belgium. From this study, it was found that the mean floc size and the Kolmogorov microscale vary in a similar way with the shear rate for suspensions with different pH and salt concentrations. The size of flocs at a given shear rate depends on the properties of the suspension, which affect the electrokinetic properties of the sediment; these can be described by means of the ζ potential. The main findings of this paper are: (1) In saline suspensions at pH = 8, the mean floc size increases when the salt concentration and the ζ potential increase. (2) For a given ζ potential, the mean floc size at low pH is larger than observed at pH = 8 for any added salt. (3) The mean floc size increases with increasing organic matter content. (4) Mud with no organic matter at pH = 8 and no added salt flocculates very little. The response of mud suspensions to variations in salinity and pH is similar to that of kaolinite. This suggests that a general trend can be established for different and complex types of clays and mud. This systematic study can therefore be used for further development of flocculation models.  相似文献   

11.
Aggregation processes of fine sediments have rarely been integrated in numerical simulations of cohesive sediment transport in riverine systems. These processes, however, can significantly alter the hydrodynamic characteristics of suspended particulate matter (SPM), modifying the particle settling velocity, which is one of the most important parameters in modelling suspended sediment dynamics. The present paper presents data from field measurements and an approach to integrate particle aggregation in a hydrodynamic sediment transport model. The aggregation term used represents the interaction of multiple sediment classes (fractions) with corresponding multiple deposition behaviour. The k–ε–turbulence model was used to calculate the coefficient of vertical turbulent mixing needed for the two‐dimensional vertical‐plane simulations. The model has been applied to transport and deposition of tracer particles and natural SPM in a lake‐outlet lowland river (Spree River, Germany). The results of simulations were evaluated by comparison with field data obtained for two levels of river discharge. Experimental data for both discharge levels showed that under the prevailing uniform hydraulic conditions along the river reach, the settling velocity distribution did not change significantly downstream, whereas the amount of SPM declined. It was also shown that higher flow velocities (higher fluid shear) resulted in higher proportions of fast settling SPM fractions. We conclude that in accordance with the respective prevailing turbulence structures, typical aggregation mechanisms occur that continuously generate similar distribution patterns, including particles that settle toward the river bed and thus mainly contribute to the observed decline in the total SPM concentration. In order to determine time‐scales of aggregation and related mass fluxes between the settling velocity fractions, results of model simulations were fitted to experimental data for total SPM concentration and of settling velocity frequency distributions. The comparison with simulations for the case of non‐interacting fractions clearly demonstrated the practical significance of particle interaction for a more realistic modelling of cohesive sediment and contaminant transport. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

12.
A depth-averaged 2-D numerical model for unsteady flow, salinity and cohesive sediment transport in estuaries is established using the finite volume method on the non-staggered, curvilinear grid. The convection terms are discretized by upwind schemes, the diffusion terms are by the central difference scheme, and the time derivative terms are by the three-time-level implicit scheme. The coupling of flow velocity and water level in the 2-D shallow water equations is achieved by the SIMPLEC algorithm with the Rhie and Chow's momentum interpolation method. The sediment model calculates the settling, deposition, erosion and transport of cohesive sediment, taking into account the influence of sediment size, sediment concentration, salinity and turbulence intensity on the flocculation of cohesive sediment. The flow model is first tested against the measurement data in the Tokyo Bay and San Francisco Bay, showing good agreements. And then, the entire model of flow, salinity and sediment transport is verified in the Gironde Estuary. The water elevation, flow velocity, salinity and sediment concentration are well predicted.  相似文献   

13.
  相似文献   

14.
This study investigates the consequences of flocculation for sediment flux in glacier‐fed Lillooet Lake, British Columbia based on density, fractal dimension, in situ profiles of sediment concentration and size distribution, and settling velocity equations presented in the literature. Sediment flux attributed to macroflocs during the late spring and summer accounts for a significant portion of sediment flux in the lake, equivalent to at least one‐quarter of the average annual sediment flux. Fine sediment is reaching the lake floor faster in flocs than occurs if settling as individual grains. This flux varies both spatially and temporally over the observation period, suggesting a link between deposition via flocculation and the properties of bottom sediments. Macrofloc flux increased through June, reached a peak during July, and then declined into August. Macrofloc flux was greatest in the distal end of the first basin, approximately 10 km from the point of inflow. Relatively high excess densities (～0·1 g cm–3 at 500 µm) for flocs in situ are consistent with a composition dominated by inorganic primary particles. Microlaminations within Lillooet Lake varves have been linked by earlier workers to discharge events, and the action of turbidity currents, emanating from the Lillooet River. While turbidity currents undoubtedly occur in Lillooet Lake, these results demonstrate flocculation as an adjunct process linking discharge, lake level, macrofloc flux, bulk density and microlaminations. In situ measurements of sediment settling velocity in glacier‐fed lakes are required to better constrain flux rates, and permit comparison between flocculation in lacustrine environments with existing studies of estuarine, marine and fluvial flocculation. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

15.
In this paper, we study a population balance equation (PBE) where flocs are distributed into classes according to their mass. Each class i contains i primary particles with mass m p and size L p. All differently sized flocs can aggregate, binary breakup into two equally sized flocs is used, and the floc??s fractal dimension is d 0?=?2, independently of their size. The collision efficiency is kept constant, and the collision frequency derived by Saffman and Turner (J Fluid Mech 1:16?C30, 1956) is used. For the breakup rate, the formulation by Winterwerp (J Hydraul Eng Res 36(3):309?C326, 1998), which accounts for the porosity of flocs, is used. We show that the mean floc size computed with the PBE varies with the shear rate as the Kolmogorov microscale, as observed both in laboratory and in situ. Moreover, the equilibrium mean floc size varies linearly with a global parameter P which is proportional to the ratio between the rates of aggregation and breakup. The ratio between the parameters of aggregation and breakup can therefore be estimated analytically from the observed equilibrium floc size. The parameter for aggregation can be calibrated from the temporal evolution of the mean floc size. We calibrate the PBE model using mixing jar flocculation experiments, see Mietta et al. (J Colloid Interface Sci 336(1):134?C141, 2009a, Ocean Dyn 59:751?C763, 2009b) for details. We show that this model can reproduce the experimental data fairly accurately. The collision efficiency ?? and the ratio between parameters for aggregation and breakup ?? and E are shown to decrease linearly with increasing absolute value of the ??-potential, both for mud and kaolinite suspensions. Suspensions at high pH and different dissolved salt type and concentration have been used. We show that the temporal evolution of the floc size distribution computed with this PBE is very similar to that computed with the PBE developed by Verney et al. (Cont Shelf Res, 2010) where classes are distributed following a geometrical series and mass conservation is statistically ensured. The same terms for aggregation and breakup are used in the two PBEs. Moreover, we argue, using both PBEs, that bimodal distributions become monomodal in a closed system with homogeneous sediment, even when a variable shear rate is applied.  相似文献   

16.
Water depth,salinity,current,and suspended sediment concentration(SSC)were measured along with the grain size distribution of bed sediment along an estuarine longitudinal section.The floc size increased with increase in the percentage of clay and silt,while decreased with increase in the percentage of sand content of bed sediment.The turbulent shear,G,had a direct effect on floc size with its value increasing with increase in G up to a G value of 15 s-1,while an inverse relation existed between floc size and G at higher G(G>15 s-1).Further,higher turbulence enabled sand to get resuspended and cause additional shear leading to the break-up of flocs.An attempt was made to modify G to account for the combined effect of water turbulence(G)and shear imparted by sand(Ga)and the impact of the modification of G on the predictability of floc size was evaluated.A new model was developed which explains floc size in terms of sediment concentration(C),salinity gradient(S),and G for different scenarios based on the value of G.Sensitivity analysis was done for observed floc size(FS)and predicted floc size using four approaches:(I)FSαCx;(II)FSαCxS-y;(III)FSαCxS-yGz for G<15 s-1and FSαCxS-yG-z for G>15 s-1;and(IV)FSαCxS-yGm-zfor G>15 s-1and Gm=G+Ga,where x,y,and z are determined by calibration.It was observed that the predictability of the floc size improved when the turbulence was modified to account for shear imparted by sand so that the coefficient of determination was increased from 0.78 for model III to 0.89 for model IV.Further,the settling velocity was expressed as a function of suspended sediment concentration,turbulent shear,and salinity gradient.The predictability of settling velocity was improved(R2 increased from 0.77 to 0.86)when the additional turbulence created by sand was incorporated in the non-dimensional empirical equation.The study highlights the influence of sand in causing the break-up of flocs and suggests that for turbulence shear values high enough to resuspend sand,and G has to be modified to account for the additional shear imparted by sand in mixed sediment estuarine environments.  相似文献   

17.
The ability of turbulent nuées ardentes (surges) to transport coarse pyroclasts has been questioned on the basis that settling velocities of coarse fragments in the deposits are much too high for them to have been supported by turbulence in a dilute gas suspension. A computer model is used to evaluate the settling velocity of pyroclasts in suspensions of varying concentration and temperature. Since suspension of grains in low-concentration surges occurs if the shear velocity exceeds the settling velocity, the shear velocities related to the 16th and 84th percentiles, and the mean of the grain-size distribution are compared in surge deposits of the Vulsini, with the shear velocity necessary to move the coarsest grain on the bed surface (the Shields criterion). The results show that the settling velocities do not vary significantly in gaseous suspensions having volume concentrations lower than 15%, and that an increase in concentration to 25% is not sufficient to decrease the settling velocity of the coarser fraction, if it represents flow shear velocity. It is shown that the settling velocity of the mean grain size (M z ) best depicts the shear velocity of a dilute turbulent suspension. Applying the results to the May 1902 paroxysmal nuées ardentes of Mount Pelée shows that the estimated mean velocities are well within the observed velocities, and sufficient to support all the clasts in dilute, turbulent suspensions.  相似文献   

18.
The ability of turbulent nuées ardentes (surges) to transport coarse pyroclasts has been questioned on the basis that settling velocities of coarse fragments in the deposits are much too high for them to have been supported by turbulence in a dilute gas suspension. A computer model is used to evaluate the settling velocity of pyroclasts in suspensions of varying concentration and temperature. Since suspension of grains in low-concentration surges occurs if the shear velocity exceeds the settling velocity, the shear velocities related to the 16th and 84th percentiles, and the mean of the grain-size distribution are compared in surge deposits of the Vulsini, with the shear velocity necessary to move the coarsest grain on the bed surface (the Shields criterion). The results show that the settling velocities do not vary significantly in gaseous suspensions having volume concentrations lower than 15%, and that an increase in concentration to 25% is not sufficient to decrease the settling velocity of the coarser fraction, if it represents flow shear velocity. It is shown that the settling velocity of the mean grain size (M z ) best depicts the shear velocity of a dilute turbulent suspension. Applying the results to the May 1902 paroxysmal nuées ardentes of Mount Pelée shows that the estimated mean velocities are well within the observed velocities, and sufficient to support all the clasts in dilute, turbulent suspensions.  相似文献   

19.
《Continental Shelf Research》2007,27(3-4):417-430
Measurements of floc sizes, floc settling velocities and effective floc densities were obtained at three locations on the inner Adriatic shelf (Italy) in February and May/June 2003 using the in situ size and settling column tripod INSSECT (Mikkelsen et al., 2004. INSSECT—an instrument platform for investigating floc properties close to the seabed. Limnology and Oceanography: Methods 2, 226–236). Measurements were carried out in a water depth of 8–12 m and the final data set comprised 2491 flocs. Relationships of observed floc size vs. floc settling velocity and floc size vs. effective floc density were similar to those observed by other authors working in similar settings. The raw data showed significant scatter around mean trends, indicating that only a relatively small fraction of variability in floc settling velocity and effective floc density was explained by floc size. For bin-averaged data, however, much of the variability in settling velocity and density was explained by floc size. On the Adriatic shelf mean floc settling velocities varied from 0.48 to 1.35 mm s−1, while mean effective floc densities varied from 8.1 to 27.5 kg m−3; within the range reported by other authors. Analysis of variance showed significant differences in floc settling velocities, effective floc densities and floc size in space and time (seasons). Thus, floc settling velocities, effective floc densities and floc size on the inner Adriatic shelf could not be characterized by a common mean, but were more appropriately characterized by a range of values, varying in time and space.  相似文献   

20.
Sediment cores from the western Gulf of Lions France were subject to known bottom shear stresses with the goal of understanding size-specific sediment erodibility. On cruises in October 2004, February and April 2005, cores with an undisturbed sediment–water interface were collected along a transect extending seaward from the Tet river mouth. The cores were exposed to increasing shear stresses (0.01–0.4 Pa) onboard the vessel shortly after collection by using a Gust erosion chamber. Samples of the suspensate were collected during the erosion experiments and analyzed for disaggregated inorganic grain size (DIGS) using a Coulter Multisizer IIe. Size-specific mobility plots were generated by dividing the proportion of each grain size in suspension at each shear stress by its proportion in the sediment before erosion. If all grain sizes that make up the bottom sediment are eroded equally from the bed, then mobility equals one for all grain sizes. Values >1 indicate that the suspended sediment is enriched in the size class and values <1 indicate that the size class is enriched in the bed. Results show that in non-cohesive, sandy silts, fine grains (clays and fine silts) are eroded preferentially from the bed at low shear stresses. With increasing bottom stress progressively larger grains are eroded from the bed. In cohesive silts, preferential erosion of the finer sizes no longer occurs, with all sizes up to medium silts eroding at approximately the same rate. Effectively, a sandy silt can be winnowed of its fine grain fraction during erosion while cohesive silts cannot. This difference in the sortability of cohesive and non-cohesive sediment during erosion may control the position and maintenance of the sand–mud transition and the sequestration of surface-adsorbed contaminants.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号