共查询到20条相似文献，搜索用时 93 毫秒
1.
The Biomass Expansion Factor (BEF) and the Root-to-Shoot Ratio (R) are variables used to quantify carbon stock in forests.
They are often considered as constant or species/area specific values in most studies. This study aimed at showing tree size
and age dependence upon BEF and R and proposed equations to improve forest biomass and carbon stock. Data from 70 sample Pinus spp. grown in southern Brazil trees in different diameter classes and ages were used to demonstrate the correlation between
BEF and R, and forest inventory data, such as DBH, tree height and age. Total dry biomass, carbon stock and CO2 equivalent were simulated using the IPCC default values of BEF and R, corresponding average calculated from data used in
this study, as well as the values estimated by regression equations. The mean values of BEF and R calculated in this study
were 1.47 and 0.17, respectively. The relationship between BEF and R and the tree measurement variables were inversely related
with negative exponential behavior. Simulations indicated that use of fixed values of BEF and R, either IPCC default or current
average data, may lead to unreliable estimates of carbon stock inventories and CDM projects. It was concluded that accounting
for the variations in BEF and R and using regression equations to relate them to DBH, tree height and age, is fundamental
in obtaining reliable estimates of forest tree biomass, carbon sink and CO2 equivalent. 相似文献
2.
This study scrutinises the use of terrestrial laser scanning (TLS) to measure diameter at breast height (DBH) and tree height at individual tree species level. LiDAR point cloud scans are collected from uniformly defined control points. The result of processed TLS data demonstrates the precise measurements of tree height and DBH by comparing it with field data (DBH, tree height, tree species and location). The average tree height and DBH obtained through TLS measurements were 9.44?m and 43.30?cm, respectively. A linear equation between TLS derived parameters and field measured values were established, which gave the coefficient of determination (r2) of 0.79 and 0.96 for tree height and DBH, respectively. Further, these parameters were used to calculate above ground biomass (AGB) for individual tree species by considering a non-destructive approach. The total AGB and carbon stock from 80 different trees are computed to be 49.601 and 22.320?tonnes, respectively. 相似文献
3.
Terrestrial laser scanning (TLS) has been used to estimate a number of biophysical and structural vegetation parameters. Of these stem diameter is a primary input to traditional forest inventory. While many experimental studies have confirmed the potential for TLS to successfully extract stem diameter, the estimation accuracies differ strongly for these studies – due to differences in experimental design, data processing and test plot characteristics. In order to provide consistency and maximize estimation accuracy, a systematic study into the impact of these variables is required. To contribute to such an approach, 12 scans were acquired with a FARO photon 120 at two test plots (Beech, Douglas fir) to assess the effects of scan mode and circle fitting on the extraction of stem diameter and volume. An automated tree stem detection algorithm based on the range images of single scans was developed and applied to the data. Extraction of stem diameter was achieved by slicing the point cloud and fitting circles to the slices using three different algorithms (Lemen, Pratt and Taubin), resulting in diameter profiles for each detected tree. Diameter at breast height (DBH) was determined using both the single value for the diameter fitted at the nominal breast height and by a linear fit of the stem diameter vertical profile. The latter is intended to reduce the influence of outliers and errors in the ground level determination. TLS-extracted DBH was compared to tape-measured DBH. Results show that tree stems with an unobstructed view to the scanner can be successfully extracted automatically from range images of the TLS data with detection rates of 94% for Beech and 96% for Douglas fir. If occlusion of trees is accounted for stem detection rates decrease to 85% (Beech) and 84% (Douglas fir). As far as the DBH estimation is concerned, both DBH extraction methods yield estimates which agree with reference measurements, however, the linear fit based approach proved to be more robust for the single scan DBH extraction (RMSE range 1.39–1.74 cm compared to 1.47–2.43 cm). With regard to the different circle fit algorithms applied, the algorithm by Lemen showed the best overall performance (RMSE range 1.39–1.65 cm compared to 1.49–2.43 cm). The Lemen algorithm was also found to be more robust in case of noisy data. Compared to the single scans, the DBH extraction from the merged scan data proved to be superior with significant lower RMSE’s (0.66–1.21 cm). The influence of scan mode and circle fitting is reflected in the stem volume estimates, too. Stem volumes extracted from the single scans exhibit a large variability with deviations from the reference volumes ranging from −34% to 44%. By contrast volumes extracted from the merged scans only vary weakly (−2% to 6%) and show a marginal influence of circle fitting. 相似文献
4.
用地基激光雷达提取单木结构参数——以白皮松为例 总被引：6，自引：1，他引：5
以白皮松(Pinus bungeana Zucc)为研究对象,针对地基激光雷达TLS扫描的3维点云数据在单株木垂直方向的分布特征,提出了一种基于体元化方法的树干覆盖度变化检测方法,获取单木枝下高;然后根据获取的枝下高引入2维凸包算法获取垂直方向分层树冠轮廓,并计算树冠体积和冠幅;同时获取的单木参数还有胸径与树高。结果表明:单木枝下高的估测精度较高,R2与RMSE分别为0.97 m和0.21 m;胸径估测结果的R2与RMSE分别为0.79 cm和1.07 cm;采用逐步线性回归方法建立单木树冠体积与其他单木参数的相关关系,模型变量包括冠幅、叶子填充树冠长度和胸径,样本数为20,模型的R2与RMSE分别是0.967 m3和2.64 m3。本文方法能较准确地估测枝下高,TLS数据具有对树冠结构3维建模的潜力。 相似文献
5.
Background
Standing dead trees are one component of forest ecosystem dead wood carbon (C) pools, whose national stock is estimated by the U.S. as required by the United Nations Framework Convention on Climate Change. Historically, standing dead tree C has been estimated as a function of live tree growing stock volume in the U.S.'s National Greenhouse Gas Inventory. Initiated in 1998, the USDA Forest Service's Forest Inventory and Analysis program (responsible for compiling the Nation's forest C estimates) began consistent nationwide sampling of standing dead trees, which may now supplant previous purely model-based approaches to standing dead biomass and C stock estimation. A substantial hurdle to estimating standing dead tree biomass and C attributes is that traditional estimation procedures are based on merchantability paradigms that may not reflect density reductions or structural loss due to decomposition common in standing dead trees. The goal of this study was to incorporate standing dead tree adjustments into the current estimation procedures and assess how biomass and C stocks change at multiple spatial scales. 相似文献6.
Remotely sensed images have been widely used to model biomass and carbon content on large spatial scales. Nevertheless, modeling biomass using remotely sensed data from steep slopes is still poorly understood. We investigated how topographical features affect biomass estimation using remotely sensed data and how such estimates can be used in the characterization of successional stands in the Atlantic Rainforest in southeastern Brazil. We estimated forest biomass using a modeling approach that included the use of both satellite data (LANDSAT) and topographic features derived from a digital elevation model (TOPODATA). Biomass estimations exhibited low error predictions (Adj. R2 = 0.67 and RMSE = 35 Mg/ha) when combining satellite data with a secondary geomorphometric variable, the illumination factor, which is based on hill shading patterns. This improved biomass prediction helped us to determine carbon stock in different forest successional stands. Our results provide an important source of modeling information about large-scale biomass in remaining forests over steep slopes. 相似文献
7.
Biomass and soil moisture are two important parameters for agricultural crop monitoring and yield estimation. In this study, the Water Cloud Model (WCM) was coupled with the Ulaby soil moisture model to estimate both biomass and soil moisture for spring wheat fields in a test site in western Canada. This study exploited both C-band (RADARSAT-2) and L-band (UAVSAR) Synthetic Aperture Radars (SARs) for this purpose. The WCM-Ulaby model was calibrated for three polarizations (HH, VV and HV). Subsequently two of these three polarizations were used as inputs to an inversion procedure, to retrieve either soil moisture or biomass without the need for any ancillary data. The model was calibrated for total canopy biomass, the biomass of only the wheat heads, as well as for different wheat growth stages. This resulted in a calibrated WCM-Ulaby model for each sensor-polarization-phenology-biomass combination. Validation of model retrievals led to promising results. RADARSAT-2 (HH-HV) estimated total wheat biomass with root mean square (RMSE) and mean average (MAE) errors of 78.834 g/m2 and 58.438 g/m2; soil moisture with errors of 0.078 m3/m3 (RMSE) and 0.065 m3/m3 (MAE) are reported. During the period of crop ripening, L-band estimates of soil moisture had accuracies of 0.064 m3/m3 (RMSE) and 0.057 m3/m3 (MAE). RADARSAT-2 (VV-HV) produced interesting results for retrieval of the biomass of the wheat heads. In this particular case, the biomass of the heads was estimated with accuracies of 38.757 g/m2 (RSME) and 33.152 g/m2 (MAE). For wider implementation this model will require additional data to strengthen the model accuracy and confirm estimation performance. Nevertheless this study encourages further research given the importance of wheat as a global commodity, the challenge of cloud cover in optical monitoring and the potential of direct estimation of the weight of heads where wheat production lies. 相似文献
8.
Site productivity is essential information for sustainable forest management and site index (SI) is the most common quantitative measure of it. The SI is usually determined for individual tree species based on tree height and the age of the 100 largest trees per hectare according to stem diameter. The present study aimed to demonstrate and validate a methodology for the determination of SI using remotely sensed data, in particular fused airborne laser scanning (ALS) and airborne hyperspectral data in a forest site in Norway. The applied approach was based on individual tree crown (ITC) delineation: tree species, tree height, diameter at breast height (DBH), and age were modelled and predicted at ITC level using 10-fold cross validation. Four dominant ITCs per 400 m2 plot were selected as input to predict SI at plot level for Norway spruce (Picea abies (L.) Karst.) and Scots pine (Pinus sylvestris L.). We applied an experimental setup with different subsets of dominant ITCs with different combinations of attributes (predicted or field-derived) for SI predictions. The results revealed that the selection of the dominant ITCs based on the largest DBH independent of tree species, predicted the SI with similar accuracy as ITCs matched with field-derived dominant trees (RMSE: 27.6% vs 23.3%). The SI accuracies were at the same level when dominant species were determined from the remotely sensed or field data (RMSE: 27.6% vs 27.8%). However, when the predicted tree age was used the SI accuracy decreased compared to field-derived age (RMSE: 27.6% vs 7.6%). In general, SI was overpredicted for both tree species in the mature forest, while there was an underprediction in the young forest. In conclusion, the proposed approach for SI determination based on ITC delineation and a combination of ALS and hyperspectral data is an efficient and stable procedure, which has the potential to predict SI in forest areas at various spatial scales and additionally to improve existing SI maps in Norway. 相似文献
9.
Georgii A Alexandrov 《Carbon balance and management》2007,2(1):4-5
Background
Understanding the relationship between the age of a forest stand and its biomass is essential for managing the forest component of the global carbon cycle. Since biomass increases with stand age, postponing harvesting to the age of biological maturity may result in the formation of a large carbon sink. This article quantifies the carbon sequestration capacity of forests by suggesting a default rule to link carbon stock and stand age. 相似文献10.
Kayo Chihiro Kalt Gerald Tsunetsugu Yuko Hashimoto Seiji Komata Hirotaka Noda Ryu Oka Hiroyasu 《Carbon balance and management》2021,16(1):1-12
With a lack of United States federal policy to address climate change, cities, the private sector, and universities have shouldered much of the work to reduce carbon dioxide (CO2) and other greenhouse gas emissions. This study aims to determine how landcover characteristics influence the amount of carbon (C) sequestered and respired via biological processes, evaluating the role of land management on the overall C budget of an urban university. Boston University published a comprehensive Climate Action Plan in 2017 with the goal of achieving C neutrality by 2040. In this study, we digitized and discretized each of Boston University’s three urban campuses into landcover types, with C sequestration and respiration rates measured and scaled to provide a University-wide estimate of biogenic C fluxes within the broader context of total University emissions. Each of Boston University’s three highly urban campuses were net sources of biogenic C to the atmosphere. While trees were estimated to sequester 0.6 ± 0.2 kg C m−2 canopy cover year−1, mulch and lawn areas in 2018 emitted C at rates of 1.7 ± 0.4 kg C m−2 year−1 and 1.4 ± 0.4 kg C m−2 year−1, respectively. C uptake by tree canopy cover, which can spatially overlap lawn and mulched landcovers, was not large enough to offset biogenic emissions. The proportion of biogenic emissions to Scope 1 anthropogenic emissions on each campus varied from 0.5% to 2%, and depended primarily on the total anthropogenic emissions on each campus. Our study quantifies the role of urban landcover in local C budgets, offering insights on how landscaping management strategies—such as decreasing mulch application rates and expanding tree canopy extent—can assist universities in minimizing biogenic C emissions and even potentially creating a small biogenic C sink. Although biogenic C fluxes represent a small fraction of overall anthropogenic emissions on urban university campuses, these biogenic fluxes are under active management by the university and should be included in climate action plans. 相似文献
11.
Information on carbon stock and flux resulting from land-use changes in subtropical, semi-arid ecosystems are important to
understand global carbon flux, yet little data is available. In the Tamaulipan thornscrub forests of northeastern Mexico,
biomass components of standing vegetation were estimated from 56 quadrats (200 m2 each). Regional land-use changes and present forest cover, as well as estimates of soil organic carbon from chronosequences,
were used to predict carbon stocks and fluxes in this ecosystem. 相似文献
12.
Estimation of green grass/herb biomass from airborne hyperspectral imagery using spectral indices and partial least squares regression 总被引：7，自引：0，他引：7
Moses Azong Cho Andrew Skidmore Fabio Corsi Sipke E. van Wieren Istiak Sobhan 《International Journal of Applied Earth Observation and Geoinformation》2007,9(4):414-424
The main objective was to determine whether partial least squares (PLS) regression improves grass/herb biomass estimation when compared with hyperspectral indices, that is normalised difference vegetation index (NDVI) and red-edge position (REP). To achieve this objective, fresh green grass/herb biomass and airborne images (HyMap) were collected in the Majella National Park, Italy in the summer of 2005. The predictive performances of hyperspectral indices and PLS regression models were then determined and compared using calibration (n = 30) and test (n = 12) data sets. The regression model derived from NDVI computed from bands at 740 and 771 nm produced a lower standard error of prediction (SEP = 264 g m−2) on the test data compared with the standard NDVI involving bands at 665 and 801 nm (SEP = 331 g m−2), but comparable results with REPs determined by various methods (SEP = 261 to 295 g m−2). PLS regression models based on original, derivative and continuum-removed spectra produced lower prediction errors (SEP = 149 to 256 g m−2) compared with NDVI and REP models. The lowest prediction error (SEP = 149 g m−2, 19% of mean) was obtained with PLS regression involving continuum-removed bands. In conclusion, PLS regression based on airborne hyperspectral imagery provides a better alternative to univariate regression involving hyperspectral indices for grass/herb biomass estimation in the Majella National Park. 相似文献
13.
Predicting individual tree attributes from airborne laser point clouds based on the random forests technique 总被引：2，自引：0，他引：2
This paper depicts an approach for predicting individual tree attributes, i.e., tree height, diameter at breast height (DBH) and stem volume, based on both physical and statistical features derived from airborne laser-scanning data utilizing a new detection method for finding individual trees together with random forests as an estimation method. The random forests (also called regression forests) technique is a nonparametric regression method consisting of a set of individual regression trees. Tests of the method were performed, using 1476 trees in a boreal forest area in southern Finland and laser data with a density of 2.6 points per m2. Correlation coefficients (R) between the observed and predicted values of 0.93, 0.79 and 0.87 for individual tree height, DBH and stem volume, respectively, were achieved, based on 26 laser-derived features. The corresponding relative root-mean-squared errors (RMSEs) were 10.03%, 21.35% and 45.77% (38% in best cases), which are similar to those obtained with the linear regression method, with maximum laser heights, laser-estimated DBH or crown diameters as predictors. With random forests, however, the forest models currently used for deriving the tree attributes are not needed. Based on the results, we conclude that the method is capable of providing a stable and consistent solution for determining individual tree attributes using small-footprint laser data. 相似文献
14.
Estimating forest biomass using small footprint LiDAR data: An individual tree-based approach that incorporates training data 总被引：1，自引：0，他引：1
Zachary J. Bortolot Randolph H. Wynne 《ISPRS Journal of Photogrammetry and Remote Sensing》2005,59(6):824
A new individual tree-based algorithm for determining forest biomass using small footprint LiDAR data was developed and tested. This algorithm combines computer vision and optimization techniques to become the first training data-based algorithm specifically designed for processing forest LiDAR data. The computer vision portion of the algorithm uses generic properties of trees in small footprint LiDAR canopy height models (CHMs) to locate trees and find their crown boundaries and heights. The ways in which these generic properties are used for a specific scene and image type is dependent on 11 parameters, nine of which are set using training data and the Nelder–Mead simplex optimization procedure. Training data consist of small sections of the LiDAR data and corresponding ground data. After training, the biomass present in areas without ground measurements is determined by developing a regression equation between properties derived from the LiDAR data of the training stands and biomass, and then applying the equation to the new areas. A first test of this technique was performed using 25 plots (radius = 15 m) in a loblolly pine plantation in central Virginia, USA (37.42N, 78.68W) that was not intensively managed, together with corresponding data from a LiDAR canopy height model (resolution = 0.5 m). Results show correlations (r) between actual and predicted aboveground biomass ranging between 0.59 and 0.82, and RMSEs between 13.6 and 140.4 t/ha depending on the selection of training and testing plots, and the minimum diameter at breast height (7 or 10 cm) of trees included in the biomass estimate. Correlations between LiDAR-derived plot density estimates were low (0.22 ≤ r ≤ 0.56) but generally significant (at a 95% confidence level in most cases, based on a one tailed test), suggesting that the program is able to properly identify trees. Based on the results it is concluded that the validation of the first training data-based algorithm for determining forest biomass using small footprint LiDAR data was a success, and future refinement and testing are merited. 相似文献
15.
Vertical plant area density profiles of wheat (Triticum aestivum L.) canopy at different growth stages (tillering, stem elongation, flowering, and ripening stages) were estimated using high-resolution portable scanning lidar based on the voxel-based canopy profiling method. The canopy was scanned three-dimensionally by laser beams emitted from several measuring points surrounding the canopy. At the ripening stage, the central azimuth angle was inclined about 23° to the row direction to avoid obstruction of the beam into the lower canopy by the upper part. Plant area density profiles were estimated, with root mean square errors of 0.28–0.79 m2 m?3 at each growth stage and of 0.45 m2 m?3 across all growth stages. Plant area index was also estimated, with absolute errors of 4.7%–7.7% at each growth stage and of 6.1% across all growth stages. Based on lidar-derived plant area density, the area of each type of organ (stem, leaves, ears) per unit ground area was related to the actual dry weight of each organ type, and regression equations were obtained. The standard errors of the equations were 4.1 g m?2 for ears and 26.6 g m?2 for stems and leaves. Based on these equations, the estimated total dry weight was from 63.3 to 279.4 g m?2 for ears and from 35.8 to 375.3 g m?2 for stems and leaves across the growth stages. Based on the estimated dry weight at ripening and the ratio of carbon to dry weight in wheat plants, the carbon stocks were 76.3 g C m?2 for grain, 225.0 g C m?2 for aboveground residue, and 301.3 g C m?2 for all aboveground organs. 相似文献
16.
Susanna L Melson Mark E Harmon Jeremy S Fried James B Domingo 《Carbon balance and management》2011,6(1):2
Background
Estimates of live-tree carbon stores are influenced by numerous uncertainties. One of them is model-selection uncertainty: one has to choose among multiple empirical equations and conversion factors that can be plausibly justified as locally applicable to calculate the carbon store from inventory measurements such as tree height and diameter at breast height (DBH). Here we quantify the model-selection uncertainty for the five most numerous tree species in six counties of northwest Oregon, USA. 相似文献17.
Predicting the deforestation-trend under different carbon-prices 总被引：1，自引：0，他引：1
Georg E Kindermann Michael Obersteiner Ewald Rametsteiner Ian McCallum 《Carbon balance and management》2006,1(1):15-17
Background
Global carbon stocks in forest biomass are decreasing by 1.1 Gt of carbon annually, owing to continued deforestation and forest degradation. Deforestation emissions are partly offset by forest expansion and increases in growing stock primarily in the extra-tropical north. Innovative financial mechanisms would be required to help reducing deforestation. Using a spatially explicit integrated biophysical and socio-economic land use model we estimated the impact of carbon price incentive schemes and payment modalities on deforestation. One payment modality is adding costs for carbon emission, the other is to pay incentives for keeping the forest carbon stock intact. 相似文献18.
Sagebrush (Artemisia tridentata), a dominant shrub species in the sagebrush-steppe ecosystem of the western US, is declining from its historical distribution due to feedbacks between climate and land use change, fire, and invasive species. Quantifying aboveground biomass of sagebrush is important for assessing carbon storage and monitoring the presence and distribution of this rapidly changing dryland ecosystem. Models of shrub canopy volume, derived from terrestrial laser scanning (TLS) point clouds, were used to accurately estimate aboveground sagebrush biomass. Ninety-one sagebrush plants were scanned and sampled across three study sites in the Great Basin, USA. Half of the plants were scanned and destructively sampled in the spring (n = 46), while the other half were scanned again in the fall before destructive sampling (n = 45). The latter set of sagebrush plants was scanned during both spring and fall to further test the ability of the TLS to quantify seasonal changes in green biomass. Sagebrush biomass was estimated using both a voxel and a 3-D convex hull approach applied to TLS point cloud data. The 3-D convex hull model estimated total and green biomass more accurately (R2 = 0.92 and R2 = 0.83, respectively) than the voxel-based method (R2 = 0.86 and R2 = 0.73, respectively). Seasonal differences in TLS-predicted green biomass were detected at two of the sites (p < 0.001 and p = 0.029), elucidating the amount of ephemeral leaf loss in the face of summer drought. The methods presented herein are directly transferable to other dryland shrubs, and implementation of the convex hull model with similar sagebrush species is straightforward. 相似文献
19.
Lamin R. Mansaray Adam Sheka Kanu Lingbo Yang Jingfeng Huang Fumin Wang 《地理信息系统科学与遥感》2020,57(6):785-796
ABSTRACT Several machine learning regression models have been advanced for the estimation of crop biophysical parameters with optical satellite imagery. However, literature on the comparative performances of such models is still limited in range and scope, especially under multiple data sources, despite the potential of multi-source imagery to improving crop monitoring in cloudy areas. To fill in this knowledge gap, this study explored the synergistic use of Landsat-8, Sentinel-2A, China’s environment and disaster monitoring and forecasting satellites (HJ-1 A and B) and Gaofen-1 (GF-1) data to evaluate four machine learning regression models that include Random Forest (RF), Support Vector Machine (SVM), k-Nearest Neighbor (k-NN), and Gradient Boosting Decision Tree (GBDT), for rice dry biomass estimation and mapping. Taking a major rice cultivation area in southeast China as case study during the 2016 and 2017 growing seasons, a cross-calibrated time series of the Enhanced Vegetation Index (EVI) was obtained from the quad-source optical imagery and on which the aforementioned models were applied, respectively. Results indicate that in the before rice heading scenario, the most accurate dry biomass estimates were obtained by the GBDT model (R2 of 0.82 and RMSE of 191.8 g/m2) followed by the RF model (R2 of 0.79 and RMSE of 197.8 g/m2). After heading, the k-NN model performed best (R2 of 0.43 and RMSE of 452.1 g/m2) followed by the RF model (R2 of 0.42 and RMSE of 464.7 g/m2). Whist the k-NN model performed least in the before heading scenario, SVM performed least in the after heading scenario. These findings may suggest that machine learning regression models based on an ensemble of decision trees (RF and GBDT) are more suitable for the estimation of rice dry biomass, at least with optical satellite imagery. Studies that would extend the evaluation of these machine learning models, to other parameters like leaf area index, and to microwave imagery, are hereby recommended. 相似文献
20.
Mads Olander Rasmussen Frank-M. Göttsche Doudou Diop Cheikh Mbow Folke-S. Olesen Rasmus Fensholt Inge Sandholt 《International Journal of Applied Earth Observation and Geoinformation》2011
A tree survey and an analysis of high resolution satellite data were performed to characterise the woody vegetation within a 10 × 10 km2 area around a site located close to the town of Dahra in the semi-arid northern part of Senegal. The surveyed parameters were tree species, height, tree crown radius, and diameter at breast height (DBH), for which allometric models were determined. An object-based classification method was used to determine tree crown cover (TCC) from Quickbird data. The average TCC from the tree survey and the respective TCC from remote sensing were both about 3.0%. For areas beyond the surveyed areas TCC varied between 3.0% and 4.5%. Furthermore, an empirical correction factor for tree clumping was obtained, which considerably improved the estimated number of trees and the estimated average tree crown area and radius. An allometric model linking TCC to tree stem crosssectional area (CSA) was developed, which allows to estimate tree biomass from remote sensing. The allometric models for the three main tree species found performed well and had r2-values of about 0.7–0.8. 相似文献