共查询到20条相似文献，搜索用时 78 毫秒
1.
Mingcai YAN Chunshu WANG Qunxian CAO Tiexin GU Qinghua CHI 《Geostandards and Geoanalytical Research》1995,19(2):125-133
Eleven gold geochemical reference samples, GAu 8–18, have been prepared by the Institute of Geophysical and Geochemical Exploration, People's Republic of China. The concentration range of gold in these samples is from 0.5 ng/g to 10 μg/g. Fifteen Chinese Institutes, experienced in gold analysis of geological samples, have participated in the certification procedure using seven reliable analytical methods. 相似文献
2.
Molan Tang Bolun Fan Lingyang Yao Zhengyu Bao Huan Tian Zhenzhen Ma Ziyi An Ming Ma Hongyu Zhang Zhongbiao Fu 《Geostandards and Geoanalytical Research》2020,44(2):375-384
The preparation and characterisation of certified reference materials of four selenium‐rich rocks (GBW07397 to GBW07400) are described in this paper. The raw materials were derived from selenium‐rich rocks in two famous seleniferous regions, Enshi Prefecture, Hubei Province and Ziyang County, Shaanxi Province, China. Sample homogeneity and stability were tested by inductively coupled plasma‐mass spectrometry and atomic fluorescence spectrometry. The determined element mass fractions included selenium, arsenic, copper, zinc, molybdenum, cadmium, lead, vanadium and silver. Except for silver, the results of analysis of variance (ANOVA) and the relative standard deviations of the element mass fractions showed that the four materials exhibited good homogeneity and stability. Ten laboratories were involved in an interlaboratory comparison scheme for certification. Eight element mass fractions in the selenium‐rich rocks were assigned as certified values, while only indicative values were obtained for Ag mass fractions. The certified values and expanded uncertainties for the selenium mass fractions in GBW07397–GBW07400 are 0.96 ± 0.05, 1.03 ± 0.05, 49 ± 4 and 38.5 ± 1.9 μg g?1, respectively. 相似文献
3.
William J. Chazey III Clive R. Neal Jinesh C. Jain William S. Kinman 《Geostandards and Geoanalytical Research》2003,27(2):181-192
The geochemical reference material BHVO-1 was analysed by a variety of techniques over a six year period. These techniques included inductively coupled plasma-mass spectrometry and atomic emission spectroscopy (ICP-MS and ICP-AES, respectively), laser ablation ICP-MS and spark source mass spectroscopy. Inconsistencies between the published consensus values reported by Gladney and Roelandts (1988, Geostandards Newsletter) and the results of our study are noted for Rb, Y, Zr, Pb and Th. The values reported here for Rb, Y, Zr and Pb are generally lower, while Th is higher than the consensus value. This is not an analytical artefact unique to the University of Notre Dame ICP-MS facility, as most of the BHVO-1 analyses reported over the last ten to twenty years are in agreement with our results. We propose new consensus values for each of these elements as follows: Rb = 9.3 ± 0.2 μg g-1 (compared to 11 ± 2 μg g-1), Y = 24.4 ± 1.3 μg g-1 (compared to 27.6 ± 1.7 μg g-1), Zr = 172 ± 10 μg g-1 (compared to 179 ± 21 μg g-1), Pb = 2.2 ± 0.2 μg g-1 (compared to 2.6 ± 0.9 μg g-1) and Th = 1.22 ± 0.02 μg g-1 (compared to 1.08 ± 0.15 μg g-1). 相似文献
4.
Determination of Selenium Concentration in Sixty Five Reference Materials for Geochemical Analysis by GFAAS after Separation with Thiol Cotton 总被引：1，自引：0，他引：1
Selenium has been determined in sixty five geological reference materials of different origins by graphite furnace atomic absorption spectrometry. Samples were decomposed with a mixture of nitric and hydrofluoric acids. Selenium was reduced to SeIV with hydrochloric acid, and then fixed and separated from the matrix on thiol cotton. After digestion of the thiol cotton in hot nitric acid, the Se concentration was measured using palladium and magnesium nitrates as a matrix modifier. The limit of determination was 0.02 μg g−1 , the precision of the results (relative standard deviation of 3 to 8 replicates) varied from 2.6 to 17.7% with an average of 7.9% in the range 0.02-42.7 μg g−1 and was similar to the value obtained for synthetic samples. Our results are in good agreement with available literature values. 相似文献
5.
Neutron Activation Analysis, Atomic Absorption and X-Ray Fluorescence Spectrometry Review for 2003 总被引：1，自引：0，他引：1
This review for the year 2003 deals with three relatively well-established, mature, analytical techniques (neutron activation analysis, atomic absorption spectrometry and X-ray fluorescence spectrometry) that nevertheless remain very important for the characterisation of geological and environmental samples. Developments in neutron activation analysis included modification to the technique in relation to the determination of platinum-group elements, as well as consideration of sample size in ore grade estimation. A considerable body of literature was published on the application of atomic absorption spectrometry in the analysis of environmental samples. Many of these proposed technical and methodological improvements, notably in extraction procedures. X-ray fluorescence spectrometry saw developments in in situ analysis, synchrotron micro-XRF (μ-SRXRF) and a confocal X-ray set-up for 3D elemental imaging. XRF technologies were used in the analysis of geological samples, reference materials, glasses, solutes and environmental materials. 相似文献
6.
Shigeru Terashima 《Geostandards and Geoanalytical Research》1997,21(1):93-96
The molybdenum (Mo) contents of fifty three geochemical reference materials issued by ANRT, GIT-IWG, NIST and GSJ, have been determined by atomic absorption spectrometry, using a graphite furnace atomiser, after extraction of Mo dithiol with isoamyl acetate. Detection limits for this method (0.01 μg g−1 ) are ten times smaller than for most classical methods. The agreement between the present results and published data is satisfactory. 相似文献
7.
Preparation and Certification of Re-Os Dating Reference Materials: Molybdenites HLP and JDC 总被引：27，自引：1，他引：27
Andao Du Shuqi Wu Dezhong Sun Shuxian Wang Wenjun Qu Richard Markey Holly Stain John Morgan Dmitry Malinovskiy 《Geostandards and Geoanalytical Research》2004,28(1):41-52
Two Re-Os dating reference material molybdenites were prepared. Molybdenite JDC and molybdenite HLP are from a carbonate vein-type molybdenum-(lead)-uranium deposit in the Jinduicheng-Huanglongpu area of Shaanxi province, China. The samples proved to be homogeneous, based on the coefficient of variation of analytical results and an analysis of variance test. The sampling weight was 0.1 g for JDC and 0.025 g for HLP. An isotope dilution method was used for the determination of Re and Os. Sample decomposition and pre-concentration of Re and Os prior to measurement were accomplished using a variety of methods: acid digestion, alkali fusion, ion exchange and solvent extraction. Negative thermal ionisation mass spectrometry and inductively coupled plasma-mass spectrometry were used for the determination of Re and 187 Os concentration and isotope ratios. The certified values include the contents of Re and Os and the model ages. For HLP, the Re content was 283.8 ± 6.2 μg g−1 , 187 Os was 659 ± 14 ng g−1 and the Re-Os model age was 221.4 ± 5.6 Ma. For JDC, the Re content was 17.39 ± 0.32 μg g−1 , 187 Os was 25.46 ± 0.60 ng g−1 and the Re-Os model age was 139.6 ± 3.8 Ma. Uncertainties for both certified reference materials are stated at the 95% level of confidence. Three laboratories (from three countries: PR. China, USA, Sweden) joined in the certification programme. These certified reference materials are primarily useful for Re-Os dating of molybdenite, sulfides, black shale, etc. 相似文献
8.
在前人研究泡塑吸附金分离的基础上,用聚氨酯泡沫塑料吸附,利用石墨炉原子吸收法测定了痕量价态金的含量,探讨了溶矿介质、解脱时间、吸附温度、Fe~(3+)加入量等对测定结果的影响,确定了最佳测定条件,详细讨论了Fe~(3+)在溶矿和吸附过程中的作用,并将该方法用于土壤中痕量价态金的测定。方法检出限为0. 01 ng/g,测定范围为0. 03～300 ng/g,价态金回收率分别是Au~(3+)97. 3%、Au~+95. 8%、Au098. 9%,价态金分离精密度(RSD,n=12)为7. 3%～18. 8%。用石墨炉原子吸收光谱法测定价态金,不但有效地抑制了共存元素的干扰,而且能降低检出限,提高灵敏度和准确度,自动化进样减少了劳动强度,提高了分析测试效率,适合大批量样品的测试。 相似文献
9.
A.H. VICTOR 《Geostandards and Geoanalytical Research》1986,10(1):13-18
Cobalt in the six S.A. primary (NIMROCS) and fourteen secondary reference samples as well as in a phosphate rock has been determined accurately by means of atomic absorption spectrometry. A selective and quantitative ion exchange separation procedure, using a 20 g column of AG50W-X8 cation exchange resin and 0.4 M hydrochloric acid-86% acetone and 1 M hydrochloric acid-80% acetone as eluting agents, is employed for the separation of cobalt from all other elements. The accuracy and precision of the described method are demonstrated by the analysis of synthetic rock solutions containing various amounts of cobalt. Amounts of 1, 10 and 100 μg of cobalt can be determined with a coefficient of variation of 1%, 0.3% and 0.2%. respectively. 相似文献
10.
Shigeru TERASHIMA Atsushi ANDO Takashi OKAI Yutaka KANAI Masahiro TANIGUCHI Fuminori TAKIZAWA Shiro ITOH 《Geostandards and Geoanalytical Research》1990,14(1):1-5
Nine new rock reference samples of the "Sedimentary rock series", Chert JCh-1, Dolomite JDo-1, Lake sediment JLk-1, Limestone JLs-1, Stream sediments JSd-1 to JSd-3, and Slates JS1-1 and JSl-2 have been prepared by the Geological Survey of Japan(GSJ). Thirty major, minor and trace elements were determined using atomic absorption spectrometry, flame emission spectrometry, infrared absorption spectrometry and wet chemical techniques. The results of homogeneity tests showed that almost all elements, with a few exceptions, are considered to be distributed homogeneously in each reference sample. 相似文献
11.
12.
卡林型金矿金砷成分分析标准物质研制 总被引：3，自引：3，他引：0
卡林型金矿因其含砷影响金的分析和选冶回收率而备受关注,需要研制相应的标准物质支撑应用研究。本文依托近年来探明的超大型卡林型金矿——阳山金矿采集候选物,按照国家一级标准物质技术规范研制了4种卡林型金矿标准物质GBW07854~GBW07857。共有20家实验室联合定值,金主要分析方法为原子吸收光谱法和火试金法,湿法分析采用梯度焙烧-活性炭吸附金而分离砷等干扰组分;砷分析主要采用电感耦合等离子体发射光谱法和分光光度法。引用金量分析相对偏差允许限界定组内离群值,弥补了Dixon法和Grubbs法剔除离群值不够完全的缺陷。均匀性检验指标FF0.05(29,30)=1.84,表明组内和组间均无明显差异;在22个月内进行了5次检验,稳定性良好。4种标准物质金和砷的定值结果准确度均优于同量级的国家一级金矿石标准物质和国外含砷多金属矿石标准物质。该系列标准物质可用作卡林型金矿金和砷分析与研究等工作的量值标准。 相似文献
13.
Yimin Wang Daihong Luo Yushu Gao Haowei Song Jiaxi Li Weiyue Chen Yunye Teng Shiguang Zhou 《Geostandards and Geoanalytical Research》1998,22(2):247-254
The research project for the preparation of two polymetallic nodule (GSPN-2, GSPN-3) and two marine sediment (GSMS-2, GSMS-3) reference materials was completed in 1996. The samples were collected from the Eastern and Central Pacific Ocean and prepared to less than 74 μm fine powder. The homogeneity of the materials was tested by X-ray fluorescence spectrometry. The relative standard deviations (RSD %) of measurements of selected elements in samples taken from thirty bottles selected at random were less than 0.5%. Thirty four laboratories worldwide participated in the collaborative analysis programme. The number of elements or constituents analysed was seventy nine for nodules and eighty one for sediments. Among those, sixty three elements were certified in each sample. The sum of major elements or components is 99.7% for GSPN-2, 99.5% for GSPN-3, 99.8% for GSMS-2 and 99.8% for GSMS-3. 相似文献
14.
Dorrit E. Jacob 《Geostandards and Geoanalytical Research》2006,30(3):221-235
Fifty-two trace elements in NIST SRM 614, 616 and MPI-DING BM90/21-G glass reference materials as well as in NIST SRM 612, USGS BCR2-G and other MPI-DING reference glasses (KL2-G, GOR132-G, GOR128-G, ATHO-G, Tl-G, StHs6/80-G and ML3B-G) were determined by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). Accurate ultra-low trace element abundances in the NIST SRM 614, 616 and BM90/21-G reference glasses down to lower ng g−1 levels were determined with relative standard deviations (RSD) of less than 10%. Limits of detection using He as carrier gas were up to two times lower than with Ar and were 0.004 to 0.12 μg g−1 for elements of lower mass numbers (amu < 85) and 0.002 to 0.06 μg g−1 for elements having amu < 85. The measured concentrations generally agree within 15% with previous studies except for B in NIST SRM 614 and 616, which appears to be heterogeneously distributed, and Co, Zn, Ga and Ag in NIST SRM 616 for which the existing data set is too small to evaluate the discrepancies. New values for As (0.593 μg g−1 ), Ag (0.361 μg g−1 ) and Cd (0.566 μg g−1 ) in NIST SRM 614 and new values for Na (94864 μg g−1 ) and As (0.276 μg g−1 ) in NIST SRM 616 are reported. 相似文献
15.
通常样品的87Sr/86Sr和143Nd/144Nd同位素比值分析采用SRM987、JNdi-1作为标准物质,它们分别是纯的碳酸盐和氧化物,适用于监控质谱测试过程。中国现有的钐-钕地质和铷-锶年龄标准物质,分别为玄武岩和钾长石,它们与很多地质样品的基质存在差别。仅有这两种基质的标准物质不能有效地监控不同地质样品Rb-Sr、Sm-Nd同位素分析过程,因此研制不同岩性的Rb-Sr、Sm-Nd同位素标准物质具有重要现实意义。本文采集中国典型地区的橄榄岩、榴辉岩和花岗岩作为候选物,严格按照《一级标准物质技术规范》(JJF 1006-1994)和《标准物质定值的通用原则及统计学原理》(JJF 1343-2012)等相关标准物质国家计量技术规范和国家标准,研制了橄榄岩、榴辉岩和花岗岩铷-锶、钐-钕同位素标准物质(编号为GBW04139、GBW04140、GBW04141),其中橄榄岩标准物质适用于高Mg、Fe,低Rb、Nd含量样品的分析,榴辉岩和花岗岩标准物质适用于含有难溶副矿物的岩石样品的分析。每个标准物质具有6个特性量值,Rb、Sr、Sm和Nd含量分布分别为0.16~64μg/g、12~560μg/g、0.1~3.2μg/g和0.3~15.3μg/g,87Sr/86Sr比值分布为0.70446~0.71309,143Nd/144Nd比值分布为0.51115~0.51267,同位素比值精度达到或优于同类标准物质。这些特性量值更接近实际样品,使用时将更加有效和方便。该系列标准物质可用于校准仪器和评价方法,并能有效监控实验室此类样品的铷-锶、钐-钕同位素分析过程。 相似文献
16.
Maria Inês C. Monteiro Marcos Paulo A. Lavatori Nilza Maria M. de Oliveira 《Geostandards and Geoanalytical Research》2003,27(3):245-249
A method involving gold extraction into isobutyl methyl ketone (IBMK), after partial dissolution with aqua regia , with determination by electrothermal atomic absorption spectrometry is described. The pyrolysis and atomisation temperatures were optimized using a pyrolytic graphite forked platform. The stability study of gold in isobutyl methyl ketone extract indicated that closed polypropylene containers (3% absorbance measurement changes) were better than both open polypropylene and closed glass containers over periods of up to 22 hr. Satisfactory recoveries of 99 and 102% were obtained when Au, in the IBMK extracts from CH-3 and MA-2 reference materials, were determined after storage of the extracts in closed polypropylene containers for 22 hr, respectively. 相似文献
17.
A.H. VICTOR 《Geostandards and Geoanalytical Research》1983,7(1):227-232
Copper in S.A. primary (NIMROCS) and in six secondary reference samples has accurately been determined by means of atomic absorption spectrometry. A selective ion exchange separation procedure, using a 20 g column of AG50W-X8 cation exchange resin and 0.2 M hydrochloric acid and 0.5 M hydrobromic acid, both containing 85% acetone, is employed for the separation of copper from all other elements, except vanadium. Vanadium which can partially accompany copper, however, is separated at the start of the sorption step with 0.01 M nitric acid-0.15% hydrogen peroxide. Accuracy and precision of the described method are demonstrated by the analysis of synthetic rock solutions containing various amounts of copper. Amounts of 10 and 100 μg of copper can be determined with a coefficient of variation of 0.3% and 0.2%, respectively. 相似文献
18.
The Pacific Border Ranges of the southern Alaskan Cordillera are composed of a number of allochthonous tectonostratigraphic terranes. Within these terranes are widespread volcanogenic, massive sulfide deposits in and adjacent to portions of accreted ophiolite complexes, bands and disseminations of chromite in accreted island-arc ultramafic rocks, and epigenetic, gold-bearing quartz veins in metamorphosed turbidite sequences. A geochemical pilot study was undertaken to determine the most efficient exploration strategy for locating these types of mineral deposits within the Pacific Border Ranges and other typical convergent continental margin environments.High-density sediment sampling was carried out in first- and second-order stream channels surrounding typical gold, chromite and massive sulfide occurrences. At each site, a stream-sediment and a panned-concentrate sample were collected. In the laboratory, the stream sediments were sieved into coarse-sand, fine- to medium-sand, and silt- to clay-size fractions prior to analysis. One split of the panned concentrates was retained for analysis; a second split was further concentrated by gravity separation in heavy liquids and then divided into magnetic, weakly magnetic and nonmagnetic fractions for analysis. A number of different techniques including atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry and semi-quantitative emission spectrography were used to analyze the various sample media.Comparison of the various types of sample media shows that in this tectonic environment it is most efficient to include a silt- to clay-size sediment fraction and a panned-concentrate sample. Even with the relatively low detection limits for many elements by plasma spectrometry and atomic absorption spectrometry, anomalies reflecting the presence of gold veins could not be identified in any of the stream-sediment fractions. Unseparated panned-concentrate samples should be analyzed by emission spectroscopy and atomic absorption spectrometry for Ag and Au. If, however, magnetic and nonmagnetic concentrate fractions are used in a reconnaissance program, semiquantitative emission spectrography is adequate for all analytical work. 相似文献
19.
Mingcai Yan Chunshu Wang Tiexin Gu Qinghua Chi Zhong Zhang 《Geostandards and Geoanalytical Research》1998,22(2):235-246
Unlike the situation for other elements, few reference materials certified for the platinum-group elements are currently available. Therefore, the GPt1-7 series of PGE geochemical CRMs, prepared by the IGGE, represent an important addition and comprise a range of matrix types, including a soil, stream sediment, Mg-rich ultramafic rock, Fe-rich ultramafic rock, platinoid ore depleted in Cu, Ni and Fe, and a chromitite. The concentration of PGE in these samples ranges over 4-5 orders of magnitude and the samples were shown to have good homogeneity as assessed by a variance test. Analytical methods based on different principles were used in sample certification, including several fire assay and wet chemical procedures used for decomposition and preconcentration. Certified values for the elements Pt, Pd, Os, Ru, Ir, Rh and Au were determined by AAS, catalytic colourimetry (COL), catalytic polarography (POL), atomic emission spectrometry (AES), ICP-MS and NAA. Recently, the GPt1-7 samples were approved as national primary CRMs by the State Bureau of Technical Supervision of China. 相似文献
20.
在王水介质条件下,用自行设计的微色谱柱在线分离富集系统分离富集矿石样品中的痕量金,采用火焰原子吸收光谱法进行测定。在原子吸收光谱仪吸喷溶液的流路上,用P350微色谱柱研究了金的分离富集条件,采用快速吸附和快速洗脱技术,以盐酸溶液为淋洗液,亚硫酸钠溶液为洗脱液,测定一个样品整个分离和测定过程仅需1 min,成功地克服了火焰原子吸收光谱法测定金灵敏度低的缺点。方法的相对标准偏差小于3.2%,检出限为0.078μg/g。与现行离线分离富集方法相比,建立的方法具有高效、快速、成本低廉的优点,经实际样品验证获得了较为满意的结果。 相似文献