首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Modelling travel and residence times in the eastern Irish Sea   总被引：2，自引：0，他引：2  
The Irish Sea, which lies between 51 degrees N-56 degrees N and 2 degrees 50'W-7 degrees W, provides a sheltered environment to exploit valuable fisheries resource. Anthropogenic activity is a real threat to its water quality. The majority of freshwater input down rivers flows into the eastern Irish Sea. The structure of the water circulation was not well understood during the planning of Sellafield nuclear plant outfall site in the eastern Irish Sea. A three-dimensional primitive equation numerical model was applied to the Irish Sea to simulate both barotropic and baroclinic circulation within the region. High accuracy was achieved with regard to the prediction of both tidal circulation and surface and nearbed water temperatures across the region. The model properly represented the Western Irish Sea Gyre, induced by thermal stratification and not known during planning Sellafield. Passive tracer simulations based on the developed hydrodynamic model were used to deliver residence times of the eastern Irish Sea region for various times of the year as well as travel times from the Sellafield outfall site to various locations within the Irish Sea. The results indicate a strong seasonal variability of travel times from Sellafield to the examined locations. Travel time to the Clyde Sea is the shortest for the autumnal tracer release (90 days); it takes almost a year for the tracer to arrive at the same location if it is released in January. Travel times from Sellafield to Dublin Bay fall within the range of 180-360 days. The average residence time of the entire eastern Irish Sea is around 7 months. The areas surrounding the Isle of Man are initially flushed due to a predominant northward flow; a backwater is formed in Liverpool Bay. Thus, elevated tracer concentrations are predicted in Liverpool Bay in the case of accidental spills at the Sellafield outfall site.  相似文献   

2.
The application of in situ gamma-ray spectrometry to the measurement of radionuclide concentration in sea water and sea-bed sediment is discussed with special reference to a towed sea-bed gamma-ray spectrometer survey of radio-effluent distribution in the Irish Sea. The sensitivity and accuracy of the method are established by comparing the spectrometer measurements with laboratory analyses of sediment samples. Contour maps produced from the spectrometer profiles are matched with the distribution of bottom sediment types and conclusions are drawn concerning the modes of transport and deposition of 137Cs in the Irish Sea.  相似文献   

3.
A variable mesh finite element model of the Irish and Celtic Sea regions with/without the inclusion of the Mersey estuary is used to examine the influence of grid resolution and the Mersey upon the higher harmonics of the tide in the region. Comparisons are made with observations and published results from finite difference models of the area. Although including a high resolution representation of the Mersey had little effect upon computed tides in the western Irish Sea it had a significant effect upon tidal currents in the eastern Irish Sea. In addition the higher harmonics of the M2 tide in near-shore regions of the eastern Irish Sea particularly the Solway and Mersey estuary together with Morecambe Bay showed significant small scale variability. The Mersey was used to test the sensitivity to including estuaries because high resolution accurate topography was available. The results presented here suggest that comparable detailed topographic data sets are required in all estuaries and near-shore regions. In addition comparisons clearly show the need for an unstructured grid model of the region that can include all the estuaries. Such an unstructured grid solution was developed here within a finite element approach, although other methods in particular the finite volume, or coordinate transformations/curvilinear grids and nesting could be applied.  相似文献   

4.
The physical and biological environment of the Barents Sea is characterised by large variability on a wide range of scales. Results from a numerical ocean model, SINMOD, are presented showing that the physical variability is partly forced by changes in annual net ice import. The mean contribution from ice import in the simulation period (1979–2007) is about 40% of the total amount of ice melted each year. The annual ice import into the Barents Sea varies between 143 and 1,236 km3, and this causes a substantial variability in the amount of annual ice melt in the Barents Sea. This in turn impacts the freshwater content. The simulated freshwater contribution from ice is 0.02 Sv on average and 0.04 Sv at maximum. When mixed into a mean net Atlantic Water (AW) inflow of 1.1 Sv with a salinity of 35.1, this freshwater addition decreases the salinity of the modified AW to 34.4 and 33.9 for the mean and maximum freshwater fluxes, respectively. Ice import may thus be important for the Barents Sea production of Arctic Ocean halocline water which has salinity of about 34.5. The changes in the ice melt the following summer due to ice import also affect the formation of dense water in the Barents Sea by changing stratification, altering the vertical mixing rates and affecting heat loss from the warm AW. The model results thus indicate that ice import from the Arctic has a great impact on water mass modification in the Barents Sea which in turn impacts the ventilation of the Arctic Ocean.  相似文献   

5.
A finite element model of the Irish and Celtic Sea regions with a range of grid resolutions is used to examine the influence of resolution upon the higher harmonics of the tide in the region. Comparisons are also made with published results from finite difference models of the area, and observations. Calculations using fine near-shore elements with non-zero water depths in coastal regions were found to be more accurate and less time consuming than those using a zero coastal water depth. A detailed examination of the spatial variability of the higher harmonics in near-shore regions of the eastern Irish Sea particularly the Solway and Morecambe Bay showed significant small-scale variability. This together with the variation in higher harmonics in the eastern Irish Sea and adjacent estuaries, clearly shows the need for an unstructured grid model of the region that can include the estuaries. To match the high resolution of the model in near-shore regions accurate high-resolution topography is required.  相似文献   

6.
The irregular seafloor of the narrow Irish Sea on the NW European Shelf has been documented over several decades. From recently collected swath bathymetry data, very large trochoidal, nearly symmetrical sediment waves are observed in many parts of the Irish Sea and appear similar to those described from other continental shelf seas in North America that were covered by glacigenic sediments during the Last Glacial Maximum. Swath multibeam and single beam bathymetry data, backscatter intensity, shallow seismic imagery, video footage and sediment cores from the Irish Sea high sediment waves have been integrated to identify their genesis with reference to present and past hydrodynamic variability. From cross-sectional profiles over asymmetrical sediment waves in the Irish Sea the direction of asymmetry is used to map residual bed stress directions and associated bedload transport paths. Irish Sea peak bed stress vectors were generated using a two-dimensional palaeo-tidal model for the NW European shelf seas and compare well with the observations. Tidally induced bed stresses are modelled to have increased between 7–10 ka BP, to be nearly symmetrical in magnitude and to have reversed in dominant direction on a millennial scale. These environmental conditions during the post-glacial marine transgression are suggested here to help comprehend the construction of the very large sediment waves, with local variations due to differences in sediment grain size, sediment supply, water depth and intensified currents due to seafloor slopes. Model parameterisation using an open ocean boundary with time-dependent tidal changes and the implementation of high-resolution bathymetric information will improve future models of small-scale bed shear stress patterns and improve the predictive value of such modelling efforts.  相似文献   

7.
Large-scale redistribution of sand by hydrodynamical processes in shelf seas is important for basin and coastal evolution on time scales of a thousand to tens of thousands of years. The influence of tides on the large-scale net sand-transport patterns in the North Sea has received much attention, but the influence of wind-driven flow and wind waves has hardly been investigated. Here, to establish the present-day situation and to develop a method that can also be used for palaeo-situations and forecasts for different sea levels, this influence is assessed for the present southern North Sea using a numerical flow model, a parametric wave model and a wave-averaged sand-transport formulation. Various forcing combinations are used to identify the dominant transport mechanisms: tides only, tides and wind, tides and waves, and combined tides, wind and waves. Wind forcing is applied in two ways to find an efficient, but still representative, method of incorporating this stochastic process: a statistical wind climatology and an observed time series. The results show that (i) the wind climatology yields a good approximation of the sand transport computed using the time series; (ii) wind-driven flow and waves only contribute significantly to the net sand transport by tides when acting together where tidal currents are small; and (iii) various combinations of forcings dominate the net sand transport in different regions of the southern North Sea: (a) tides dominate in the southern, middle and northwestern parts of the Southern Bight and in the region of The Wash; (b) tides, wind-driven flow and waves all are important in the northeastern part of the Southern Bight; and (c) wind-driven flow and waves dominate north of the Friesian Islands, in the German Bight and on the Dogger Bank. Qualitative comparison with observations shows good agreement.  相似文献   

8.
Liverpool Bay is a region of freshwater influence which receives significant freshwater loading from a number of major English and Welsh rivers. Strong tidal current flow interacts with a persistent freshwater-induced horizontal density gradient to produce strain-induced periodic stratification (SIPS). Recent work (Palmer in Ocean Dyn 60:219–226, 2010; Verspecht et al. in Geophys Res Lett 37:L18602, 2010) has identified significant modification to tidal ellipses in Liverpool Bay during stratification due to an associated reduction in pycnocline eddy viscosity. Palmer (Ocean Dyn 60:219–226, 2010) identified that this modification results in asymmetry in flow in the upper and lower layers capable of permanently transporting freshwater away from the Welsh coastline via a SIPS pumping mechanism. Observational data from a new set of observations from the Irish Sea Observatory site B confirm these results; the measured residual flow is 4.0 cm s−1 to the north in the surface mixed layer and 2.4 cm s−1 to the south in the bottom mixed layer. A realistically forced 3D hydrodynamic ocean model POLCOMS succeeds in reproducing many of the characteristics of flow and vertical density structure at site B and is used to estimate the transport of water through a transect WT that runs parallel with the Welsh coast. Model results show that SIPS is the dominant steady state, occurring for 78.2% of the time whilst enduring stratification exists only 21.0% of the year and enduring mixed periods, <1%. SIPS produces a persistent offshore flow of freshened surface water throughout the year. The estimated net flux of water in the surface mixed layer is 327 km3 year −1, of which 281 km3 year−1 is attributable to SIPS periods. Whilst the freshwater component of this flux is small, the net flux of freshwater through WT during SIPS is significant, the model estimates 1.69 km3 year−1 of freshwater to be transported away from the coast attributable to SIPS periods equivalent to 23% of annual average river flow from the four catchment areas feeding Liverpool Bay. The results show SIPS pumping to be an important process in determining the fate of freshwater and associated loads entering Liverpool Bay.  相似文献   

9.
An unstructured mesh model of the west coast of Britain, covering the same domain and using topography and open boundary forcing that are identical to a previous validated uniform grid finite difference model of the region, is used to compare the performance of a finite volume (FV) and a finite element (FE) model of the area in determining tide–surge interaction in the region. Initial calculations show that although qualitatively both models give comparable tidal solutions in the region, comparison with observations shows that the FV model tends to under-estimate tidal amplitudes and hence background tidal friction in the eastern Irish Sea. Storm surge elevations in the eastern Irish Sea due to westerly, northerly and southerly uniform wind stresses computed with the FV model tend to be slightly higher than those computed with the FE model, due to differences in background tidal friction. However, both models showed comparable non-linear tide–surge interaction effects for all wind directions, suggesting that they can reproduce the extensive tide–surge interaction processes that occur in the eastern Irish Sea. Following on from this model comparison study, the physical processes contributing to surge generation and tide–surge interaction in the region are examined. Calculations are performed with uniform wind stresses from a range of directions, and the balance of various terms in the hydrodynamic equations is examined. A detailed comparison of the spatial variability of time series of non-linear bottom friction and non-linear momentum advection terms at six adjacent nodes at two locations in water depths of 20 and 6 m showed some spatial variability from one node to another. This suggests that even in the near coastal region, where water depths are of the order of 6 m and the mesh is fine (of order 0.5 km), there is significant spatial variability in the non-linear terms. In addition, distributions of maximum bed stress due to tides and wind forcing in nearshore regions show appreciable spatial variability. This suggests that intensive measurement campaigns and very high-resolution mesh models are required to validate and reproduce the non-linear processes that occur in these regions and to predict extreme bed stresses that can give rise to sediment movement. High-resolution meshes will also be required in pollution transport problems.  相似文献   

10.
The storm surge period of 13–16 November 1977 when there was a major positive surge followed by a negative surge in the Irish Sea is investigated using a two-dimensional unstructured mesh model of the west coast of Britain. The model accounts for tidal and external surge forcing across its open boundaries which are situated in the Celtic Sea and off the west coast of Scotland. Although this period has been examined previously using a uniform finite-difference model, and a finite element model, neither of these could resolve the Mersey estuary which is the focus of the present study. By using a finite element model with very high mesh resolution within the Mersey, the spatial variability of surge elevations and currents within the Mersey to rapidly changing surge dynamics can be examined. The mesh in the model varies from about 7 km in deep water, to the order of 100 m in the Mersey, with the largest mesh length reaching 17 km in deep offshore regions, and smallest of order 26 m occurring in shallow coastal regions of the Mersey estuary. The model accounts for wetting/drying which occurs in shallow water coastal areas. Calculations showed that during the positive surge period, the amplitude and speed of propagation of the surge was largest in the deep water channels. This gave rise to significant spatial variability of surge elevations and currents within the estuary. As wind stresses decreased over the Irish Sea, a negative surge occurred over Liverpool Bay and at the entrance to the Mersey. However, within the Mersey there was a local positive surge which continued to propagate down the estuary. This clearly showed that although the large scale response of the Irish Sea to changing wind fields occurred rapidly, the response in the Mersey was much slower. These calculations with a west coast variable mesh model that included a high-resolution representation of the Mersey revealed for the first time how elevations and currents within the Mersey responded to Irish Sea surges that rapidly changed from positive to negative.  相似文献   

11.
Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M2, M4 and M6 components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M2 tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M2 tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M2 tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M4 tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M6 component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M2 and M4 tide between models remained. For M6, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M2 tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M4, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M6 in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M6 tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.  相似文献   

12.
A simple and efficient method to improve morphological predictions using depth-averaged tidal models is presented. The method includes the contribution of secondary flows in sediment transport using the computed flow field from a depth-averaged model. The method has been validated for a case study using the 3D POLCOMS model and ADCP data. The enhanced depth-averaged tidal model along with the SWAN wave model are applied to morphological prediction around the Lleyn Peninsula and Bardsey Island as a case study in the Irish Sea. Due to the presence of a headland in this area two asymmetrical tidal eddies are developed in which the cyclonic eddy is stronger as a result of Coriolis effects. The results show that the enhanced model can effectively predict formation of sand banks at the centre of cyclonic eddies, while the depth-averaged model, due to its inability to accommodate secondary flow, is inadequate in this respect.  相似文献   

13.
In this work, we describe a stochastic method for delineating well capture zones in randomly heterogeneous porous media. We use a moment equation (ME) approach to derive the time-dependent mean capture zones and their associated uncertainties. The mean capture zones are determined by reversely tracking the non-reactive particles released at a small circle around each pumping well. The uncertainty associated with the mean capture zones is calculated based on the particle displacement covariances for nonstationary flow fields. The flow statistics are obtained either by directly solving the flow moment equations derived with a first-order ME approach or from Monte Carlo simulations (MCS) of flow. The former constitutes a full ME approach, and the latter is a hybrid ME-MCS approach. This hybrid approach is invoked to examine the validity of the transport component of the stochastic method by ensuring that the ME and MC transport approaches have the same underlying flow statistics. We compared both the full ME and the hybrid ME-MCS results with those obtained with a full MCS approach. It has been found that the three approaches are in excellent agreement when the variability of hydrologic conductivity is small (Y2=0.16). At a moderate variability (Y2=0.5), the hybrid ME-MCS and the full MCS results are in excellent agreement whereas the results from the full ME approach deviate slightly from the full MCS results. This indicates that the (first-order) ME transport approach renders a good approximation at this level of variability and that the first-order ME flow approximation may not be sufficiently accurate at this variability in the case of divergent/convergent flow. The first-order ME flow approach may need to be corrected with higher-order terms even for moderate Y2 although the literature results reveal that the first-order ME flow approach is robust for uniform mean flow (i.e., giving accurate results even with Y2 as large as four).  相似文献   

14.
Variability of dense water formation in the Ross Sea   总被引：1，自引：0，他引：1  
This paper presents results from a model study of the interannual variability of high salinity shelf water (HSSW) properties in the Ross Sea. Salinity and potential temperature of HSSW formed in the western Ross Sea show oscillatory behaviour at periods of 5–6 and 9 years superimposed on long-term fluctuations. While the shorter oscillations are induced by wind variability, variability on the scale of decades appears to be related to air temperature fluctuations. At least part of the strong decrease of HSSW salinities deduced from observations for the period 1963–2000 is shown to be an aliasing artefact due to an undersampling of the periodic signal. While sea ice formation is responsible for the yearly salinity increase that triggers the formation of HSSW, interannual variability of net freezing rates hardly affects changes in the properties of the resulting water mass. Instead, results from model experiments indicate that the interannual variability of dense water characteristics is predominantly controlled by variations in the shelf inflow through a sub-surface salinity and a deep temperature signal. The origin of the variability of inflow characteristics to the Ross Sea continental shelf can be traced into the Amundsen and Bellingshausen Seas. The temperature anomalies are induced at the continental shelf break in the western Bellingshausen Sea by fluctuations of the meridional transport of circumpolar deep water with the eastern cell of the Ross Gyre. In the Amundsen Sea, upwelling due to a persistently cyclonic wind field carries the signal into the surface mixed layer, leading to fluctuations of the vertical heat flux, anomalies of brine release near the sea ice edge, and consequently to a sub-surface salinity anomaly. With the westward flowing coastal current, both the sub-surface salinity and deep temperature signals are advected onto the Ross Sea continental shelf. Convection carries the signal of salinity variability into the deep ocean, where it interacts with modified circumpolar deep water upwelled onto the continental shelf as the second source water mass of HSSW. Sea ice formation on the Ross Sea continental shelf thus drives the vertical propagation of the signal rather than determining the signal itself.  相似文献   

15.
A detailed analysis of the short and medium term dynamics of the carbon exchange between the Baltic Sea and the North Sea is presented. To quantify the carbon fluxes distinguishing the Baltic and North Sea water masses, the salinity-based End Members (EM) method was successfully applied. The results of 0.63±0.25×1012 mol C year−1 identify the Baltic Sea as a net source of carbon for the North Sea. Dissolved organic carbon (DOC) was found to contribute significantly (22%) to the bulk of exported carbon. The levels determined suggest the hydrology-dependence of the carbon fluxes in the Danish Straits, which stimulates the high variability of carbon fluxes at both interseasonal and interannual scales.  相似文献   

16.
An investigation has been undertaken into the dispersal of contaminants from the Irish Sea into coastal waters of Scotland via the North Channel. A total of 97 surface samples have been analysed for dissolved copper, cadmium and lead. Salinity and reactive phosphate have also been determined. Evidence is presented to suggest that copper, cadmium and reactive phosphate behave essentially conservatively on mixing into Scottish coastal waters. This behaviour is likened to the dispersal of137Cs from the Sellafield nuclear fuel reprocessing plant. It is suggested that this simple mechanism is inadequate to account for the lead distribution. It is proposed that this element is partly taken up by suspended particulates and sediments in the well-mixed turbid waters of the North Channel.It has been demonstrated elsewhere that contaminants from the Irish Sea, such as137Cs enter the Firth of Clyde from the North Channel. In the present study North Channel waters are demonstrated to be an important source of trace metals to the Firth of Clyde. At the time of this survey however high concentrations of trace metals were not entering the Firth of Clyde from the North Channel. This is principally attributed to a salinity front associated with the entrance of the Firth which hinders transport across the sill.  相似文献   

17.
An inverse model is applied for the analysis of hydrographic and current meter data collected on the repeat WOCE section SR4 in the Weddell Sea in 1989–1992. The section crosses the Weddell Sea cyclonic gyre from Kapp Norvegia to the northern end of the Antarctic Peninsula. The concepts of geostrophy, conservation of planetary vorticity and hydrostatics are combined with advective balances of active and passive properties to provide a dynamically consistent circulation pattern. Our variational assimilation scheme allows the calculation of three-dimensional velocities in the section plane. Current speeds are small except along the coasts where they reach up to 12 cm/s. We diagnose a gyre transport of 34 Sverdrup which is associated with a poleward heat transport of 28 × 1012 W corresponding to an average heat flux of 15 Wm–2 in the Weddell Sea south of the transect. This exceeds the estimated local flux on the transect of 2 Wm–2. As the transect is located mostly in the open ocean, we conclude that the shelf areas contribute significantly to the ocean-atmosphere exchange and are consequently key areas for the contribution of the Weddell Sea to global ocean ventilation. Conversion of water masses occuring south of the section transform 6.6 ± 1.1 Sv of the inflowing warm deep water into approximately equal amounts of Weddell Sea deep water and Weddell Sea bottom water. The volume transport of surface water equals in the in-and outflow. This means that almost all newly formed surface water is involved in the deep and bottom water formation. Comparison with the results obtained by pure velocity interpolation combined with a hydrographic data subset indicates major differences in the derived salt transports and the water mass conversion of the surface water. The differences can be explained by deviations in the structure of the upper ocean currents to which shelf areas contribute significantly. Additionally a rigorous variance analysis is performed. When only hydrographic data are used for the inversion both the gyre transport and the poleward heat transport are substantially lower. They amount to less than 40% of our best estimate while the standard deviations of both quantities are 6.5 Sv and 37 × 1012 W, respectively. With the help of long-term current meter measurements these errors can be reduced to 2 Sv and 8 × 1012 W. Our result underlines the importance of velocity data or equivalent information that helps to estimate the absolute velocities.  相似文献   

18.
This study presents the distribution of dissolved inorganic carbon (DIC) along the Strait of Gibraltar, its tidal-induced variability, as well as the inorganic carbon exchange between the Atlantic Ocean and Mediterranean Sea. During November 2003, water column samples were collected at nine stations to measure total alkalinity (TA), pH, and dissolved oxygen (DO) for the spatial characterization of the carbonate system. At the same time, anchored samplings were carried out, above the Camarinal Sill and in the Eastern Section of the Strait, in order to assess the tidal mixing effects for oxygen and DIC distribution on the water column. Three distinct water masses can be discerned in this area: the Surface Atlantic Water (SAW), the Mediterranean Water (MW), and the less abundant North Atlantic Central Water (NACW). The observations show an increase in the DIC and a decrease in oxygen concentration with depth, related to the different physico-chemical features of each water mass. The results show the high time-dependence of the vertical distribution of DIC with the interface oscillation, affected by the intense mixing processes taking place in the Strait. Intense mixing episodes over the Camarinal Sill are responsible for an increase in the DIC concentrations in the upper layer of the Eastern Section of the Strait. Higher DIC concentrations in the Mediterranean than in the Atlantic waters are responsible for a net DIC transport of 1.47×1012 mol C yr−1 to the Atlantic Ocean. Nevertheless, the net exchange is highly sensitive to the interface definition, as well as to the estimate of water volume transport used.  相似文献   

19.
We revisit the surge of November 1977, a storm event which caused damage on the Sefton coast in NW England. A hindcast has been made with a coupled surge-tide-wave model, to investigate whether a wave-dependent surface drag is necessary for accurate surge prediction, and also if this can be represented by an optimised Charnock parameter. The Proudman Oceanographic Laboratory Coastal Modelling System-Wave Model (POLCOMS-WAM) has been used to model combined tides, surges, waves and wave-current interaction in the Irish Sea on a 1.85 km grid. This period has been previously thoroughly studied, e.g. Jones and Davies [Jones, J.E., Davies, A.M., 1998. Storm surge computations for the Irish Sea using a three-dimensional numerical model including wave-current interaction. Continental Shelf Research 18(2), 201–251] and we build upon this previous work to validate the POLCOMS-WAM model to test the accuracy of surge elevation predictions in the study area. A one-way nested approach has been set up from larger scale models to the Irish Sea model. It was demonstrated that (as expected) swell from the North Atlantic does not have a significant impact in the eastern Irish Sea. To capture the external surge generated outside of the Irish Sea a (1/9° by 1/6°) model extending beyond the continental shelf edge was run using the POLCOMS model for tide and surge.  相似文献   

20.
《Continental Shelf Research》2007,27(10-11):1584-1599
Historic data from the Russian-American Hydrochemical Atlas of Arctic Ocean together with data from the TRANSDRIFT II 1994 and TUNDRA 1994 cruises have been used to assess the spatial and inter-annual variability of carbon and nutrient fluxes, as well as air–sea CO2 exchange in the Laptev and western East Siberian Seas during the summer season. Budget computations using summer data of dissolved inorganic phosphate (DIP), dissolved inorganic nitrogen (DIN) and dissolved inorganic carbon (DIC) gives that the Laptev Sea shelf is a net sink of DIP and DIN of 2.5×106, 23.2×106 mol d−1, respectively, while it is a net source of DIC (excluding air–sea exchange) of 1249×106 mol d−1. In the East Siberian Seas the budget computations give 0.5×106, −11.4×106 and −173×106 mol d−1 (minus being a sink) for DIP, DIN, and DIC, respectively. In summers, the Laptev Sea Shelf is net autotrophic while the East-Siberian Sea Shelf is net heterotrophic, and both systems are weak net denitrifying. The Laptev Sea Shelf takes up 2.1 mmol CO2 m−2 d−1 from atmosphere, whereas the western part of the East-Siberian Sea Shelf loose 0.3 mmol CO2 m−2 d−1 to the atmosphere. The variability of DIP, DIN and DIC fluxes during summer in the different regions of the Laptev and East Siberian Seas depends on bottom topography, river runoff, exchange with surrounding seas and wind field.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号