首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 312 毫秒
1.
The Lapa gold deposit contains reserves of 2.4 Mt at 6.5 g/t Au and is one of the few deposits located directly within the Cadillac–Larder Lake Fault Zone (CLLFZ), a first-order crustal-scale fault that separates the Archean Abitibi Subprovince from the Pontiac Subprovince to the south. Gold mineralization is predominantly hosted in highly strained and altered, upper greenschist–lower amphibolite facies mafic to ultramafic rocks of the Piché Group. Auriferous ore zones consist of finely disseminated auriferous arsenopyrite–pyrrhotite?±?pyrite and native gold disseminated in biotite- and carbonate-altered wall rocks. Native gold, which is also present in quartz ± dolomite–calcite veinlets, is locally associated with Sb-bearing minerals, especially at depth ≤1 km from surface where the deposit is characterized by a Au–Sb–As association. At vertical depth greater than 1 km, gold is associated with arsenopyrite and pyrrhotite (Au–As association). The mineralogy and paragenesis of the Lapa deposit metamorphosed ore and alteration assemblages record the superposition of three metamorphic episodes (M1, M2, and M3) and three gold mineralizing events. Spatial association between biotitized wall rocks and auriferous arsenopyrite indicates that arsenopyrite precipitation is concomitant with potassic alteration. The predominant Au–As association recognized across the deposit is related to gold in solid solution in arsenopyrite as part of a pre-M2 low-grade auriferous hydrothermal event. However, the occurrence of hornblende?+?oligoclase porphyroblasts overprinting the biotite alteration, and the presence of porous clusters and porphyroblasts of arsenopyrite with native gold and pyrrhotite indicate an auriferous metasomatic event associated with peak M2 prograde metamorphism. Late retrograde metamorphism (M3) overprints the hornblende–oligoclase M2 assemblage within the host rocks proximal to ore by an actinolite–albite assemblage by precipitation of free gold and Sb–sulfosalts at lower P–T. The complex relationships between ore, structural features, and metamorphic assemblages at Lapa are related to the tectonometamorphic evolution of the Cadillac–Larder Lake Fault Zone at different times and crustal levels, and varying heat and fluid flow regimes. The Lapa deposit demonstrates that early, low-grade gold mineralization within the Cadillac–Larder Lake Fault Zone has benefited from late gold enrichment(s) during prograde and retrograde metamorphism, suggesting that multi-stage processes may be important to form gold-rich orogenic deposits in first order crustal-scale structures.  相似文献   

2.
The Laloki and Federal Flag deposits are two of the many (over 45) polymetallic massive sulfide deposits that occur in the Astrolabe Mineral Field, Papua New Guinea. New data of the mineralogical compositions, mineral textures, and fluid inclusion studies on sphalerite from Laloki and Federal Flag deposits were investigated to clarify physiochemical conditions of the mineralization at both deposits. The two deposits are located about 2 km apart and they are stratigraphically hosted by siliceous to carbonaceous claystone and rare gray chert of Paleocene–Eocene age. Massive sulfide ore and host rock samples were collected from each deposit for mineralogical, geochemical, and fluid inclusion studies. Mineralization at the Laloki deposit consists of early‐stage massive sulfide mineralization (sphalerite‐barite, chalcopyrite, and pyrite–marcasite) and late‐stage brecciation and remobilization of early‐stage massive sulfides that was accompanied by late‐stage sphalerite mineralization. Occurrence of native gold blebs in early‐stage massive pyrite–marcasite‐chalcopyrite ore with the association of pyrrhotite‐hematite and abundant planktonic foraminifera remnants was due to reduction of hydrothermal fluids by the reaction with organic‐rich sediments and seawater mixing. Precipitation of fine‐grained gold blebs in late‐stage Fe‐rich sphalerite resulted from low temperature and higher salinity ore fluids in sulfur reducing conditions. In contrast, the massive sulfide ores from the Federal Flag deposit contain Fe‐rich sphalerite and subordinate sulfarsenides. Native gold blebs occur as inclusions in Fe‐rich sphalerite, along sphalerite grain boundaries, and in the siliceous‐hematitic matrix. Such occurrences of native gold suggest that gold was initially precipitated from high‐temperature, moderate to highly reduced, low‐sulfur ore fluids. Concentrations of Au and Ag from both Laloki and Federal Flag deposits were within the range (<10 ppm Au and <100 ppm Ag) of massive sulfides at a mid‐ocean ridge setting rather than typical arc‐type massive sulfides. The complex relationship between FeS contents in sphalerite and gold grades of both deposits is probably due to the initial deposition of gold on the seafloor that may have been controlled by factors such as Au complexes, pH, and fO2 in combination with temperature and sulfur fugacity.  相似文献   

3.
Abstract. The Yuryang gold deposit, comprising a Te‐bearing Au‐Ag vein mineralization, is located in the Cheonan area of the Republic of Korea. The deposit is hosted in Precambrian gneiss and closely related to pegmatite. The mineralized veins display massive quartz textures, with weak alteration adjacent to the veins. The ore mineralization is simple, with a low Ag/Au ratio of 1.5:1, due to the paucity of Ag‐phases. Ore mineralization took place in two different mineral assemblages with paragenetic time; early Fe‐sulfide mineralization and late Fe‐sulfide and Au‐Te mineralization. The early Fe‐sulfide mineralization (pyrite + sphalerite) occurred typically along the vein margins, and the subsequent Au‐Te mineralization is characterized by fracture fillings of galena, sphalerite, pyrrhotite, Te‐bearing minerals (petzite, altaite, hessite and Bi‐Te mineral) and electrum. Fluid inclusions characteristically contain CO2 and can be classified into four types (Ia, Ib, IIa and IIb) according to the phase behavior. The pressure corrected temperatures (≥500d?C) indicate that the deposit was formed at a distinctively high temperature from fluids with moderate to low salinity (<12 wt% equiv. NaCl) and CH4 (1?22 mole %). The sphalerite geo‐barometry yield an estimated pressure about 3.5 ?2.1 kbar. The dominant ore‐deposition mechanisms were CO2 effervescence and concomitant H2S volatilization, which triggered sulfidation and gold mineralization. The measured and calculated isotopic compositions of fluids (δ18OH2O = 10.3 to 12.4 %o; δDH2O = ‐52 to ‐77 %o) may indicate that the gold deposition originated from S‐type magmatic waters. The physicochemical conditions observed in the Yuryang gold deposit indicate that the Jurassic gold deposits in the Cheonan area, including the Yuryang gold deposit are compatible with deposition of the intrusion‐related Au‐Te veins from deeply sourced fluids generated by the late Jurassic Daebo magmatism.  相似文献   

4.
Classic porphyry Cu–Mo deposits are mostly characterized by close temporal and spatial relationships between Cu and Mo mineralization. The northern Dabate Cu–Mo deposit is a newly discovered porphyry Cu–Mo polymetallic deposit in western Tianshan, northwest China. The Cu mineralization postdates the Mo mineralization and is located in shallower levels in the deposit, which is different from most classic porphyry Cu–Mo deposits. Detailed field investigations, together with microthermometry, laser Raman spectroscopy, and O‐isotope studies of fluid inclusions, were conducted to investigate the origin and evolution of ore‐forming fluids from the main Mo to main Cu stage of mineralization in the deposit. The results show that the ore‐forming fluids of the main Mo stage belonged to an NaCl + H2O system of medium to high temperatures (280–310°C) and low salinities (2–4 wt% NaCl equivalent (eq.)), whereas that of the main Cu stage belonged to an F‐rich NaCl + CO2 + H2O system of medium to high temperatures (230–260°C) and medium to low salinities (4–10 wt% NaCl eq.). The δ18O values of the ore‐forming fluids decrease from 3.7–7.8‰ in the main Mo stage to ?7.5 to ?2.9‰ in the main Cu stage. These data indicate that the separation of Cu and Mo was closely related to a large‐scale vapor–brine separation of the early ore‐forming fluids, which produced the Mo‐bearing and Cu‐bearing fluids. Subsequently, the relatively reducing (CH4‐rich) Mo‐bearing, ore‐forming fluids, dominantly of magmatic origin, caused mineralization in the rhyolite porphyry due to fluid boiling, whereas the relatively oxidizing (CO2‐rich) Cu‐bearing, ore‐forming fluids mixed with meteoric water and precipitated chalcopyrite within the crushed zone at the contact between rhyolite porphyry and wall rock. We suggest that the separation of Cu and Mo in the deposit may be attributed to differences in the chemical properties of Cu and Mo, large‐scale vapor–brine separation of early ore‐forming fluids, and changes in oxygen fugacity.  相似文献   

5.
金汞砷锑矿床中的铊   总被引：5，自引：0，他引：5       下载免费PDF全文
  相似文献   

6.
  相似文献   

7.
The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H2O–NaCl and H2O–CO2–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm3, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H2O–NaCl–CO2–CH4–N2 system. The δ34SCDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ13CPDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.  相似文献   

8.
The recent deep prospecting results in the Jiaojia area of Eastern Shandong Province indicate that the Jiaojia ore field composed of several individual gold deposits as previously suggested is actually an ultra-large gold deposit. This deposit covers an area of ~40 km2, and shows a structural control by the Jiaojia fault and its secondary faults. Gold orebodies generally occur along the same mineralization-alteration belt, and the main orebodies intersect with each other or exhibit a parallel or overlapping distribution. This deposit's reserves are estimated to be 1, 200t of gold, being the first gold deposit of more than 1000t gold reserves in China. The No. I-1 orebody in the Shaling-deep Sizhuang ore blocks holds gold reserves greater than 350 t, or 29 percent of the total reserves, followed by the No. I orebody in Matang-Jiaojia ore blocks with exceeding 150t gold reserves. This deposit mainly occurs in the footwall of the Jiaojia fault, and presents zoned patterns in mineralization, alteration and structures. The strongly mineralized zones agree with strongly altered and tectonically fractured zones. These orebodies display strataform-like, veinlike or lenticular shapes, and generally show characteristics of pinching out and reappearing, branching and converging, expanding and shrinking. The orebodies commonly occur along positions where the fault strike changes and in gentle locations with dips changing from steep to gentle. The main orebodies are parallel to the main plane of the orecontrolling fault, and tend to be gentle from the surface to the deep. The orebodies mainly plunge to the southwest, with plunge angle of 45°–60°. Orebodies near the main plane of the ore-controlling fault have more gold resource than those away from main fault zone. The slant depth of orebodies is generally larger than the length along its strike direction; orebodies become thick and gold grades become low from the shallow area to the deep area. Ore-forming fluids are H2O-CO2-NaCl±CH4 type with medium-temperature and moderate to low salinity. Sulfur isotopic values(δ34SCDT) for gold ores range between 11.08‰ and 12.58‰, indicating mixed sulfur sources; hydrogen isotopic values(δDVSMOW) range from-83.68‰ to-116.95‰ and oxygen isotopic values(δ18OV-SMOW) range between 12.04‰ and 16.28‰. The hydrogen and oxygen isotopes suggest that ore-forming fluids originated from primary magma, and mixing with a large amount of atmospheric water during the late stage. The Eastern Shandong Province gold deposits are associated with magmatic activities which have mantlecrust-mixed source, and also share some similarities with orgenic and epithermal hydrothermal gold deposits. Because Eastern Shandong Province gold deposits with unique metallogenic features and formation setting which are different from other gold deposit types in the world, we call it the Jiaojiatype gold deposits. The kiloton class Jiaojia gold deposit is related to fluid activities, extension and detachment resulted from thermal upwelling of magmas. The strong magmatic activities in the middle to late stage of early Cretaceous in Eastern Shandong Province lead to active fluids, and provided abundant ore-forming materials for gold depsoits. Moreover, many extensional structures resulting from crustal extension provided favourable space for orebody positioning.  相似文献   

9.
A granite‐related scheelite deposit has been recently discovered in the Wuyi metallogenic belt of southeast China. The veinlet–disseminated scheelite occurs mainly in the inner and outer contact zones of the porphyritic biotite granite, spatially associated with potassic feldspathization and silicification. Re–Os dating of molybdenite intergrowths with scheelite yield a well‐constrained isochron age of 170.4 ± 1.2 Ma, coeval with the LA–MC–ICP–MS concordant zircon age of porphyritic biotite granite (167.6 ± 2.2 Ma), indicating that the Lunwei W deposit was formed in the Middle Jurassic (~170 Ma). We identify three stages of ore formation (from early to late): (I) the quartz–K‐feldspar–scheelite stage; (II) the quartz–polymetallic sulfide stage; and (III) the quartz–carbonate stage. Based on petrographic observations and microthermometric criteria, the fluid inclusions in the scheelite and quartz are determined to be mainly aqueous two‐phase (liquid‐rich and gas‐rich) fluid inclusions, with minor gas‐pure and CO2‐bearing fluid inclusions. Ore‐forming fluids in the Lunwei W deposit show a successive decrease in temperature and salinity from Stage I to Stage III. The homogenization temperature decreases from an average of 299 °C in Stage I, through 251 °C in Stage II, to 212 °C in Stage III, with a corresponding change in salinity from an average of 5.8 wt.%, through 5.2 wt.%, to 3.4 wt.%. The ore‐forming fluids have intermediate to low temperatures and low salinities, belonging to the H2O–NaCl ± CO2 system. The δ18OH2O values vary from 1.8‰ to 3.3‰, and the δDV‐SMOW values vary from –66‰ to –76‰, suggesting that the ore‐forming fluid was primarily of magmatic water mixed with various amounts of meteoric water. Sulfur isotope compositions of sulfides (δ34S ranging from –1.1‰ to +2.4‰) and Re contents in molybdenite (1.45–19.25 µg/g, mean of 8.97 µg/g) indicate that the ore‐forming materials originated mainly in the crust. The primary mechanism for mineral deposition in the Lunwei W deposit was a decrease in temperature and the mixing of magmatic and meteoric water. The Lunwei deposit can be classified as a porphyry‐type scheelite deposit and is a product of widespread tungsten mineralization in South China. We summarize the geological characteristics of typical W deposits (the Xingluokeng, Shangfang, and Lunwei deposits) in the Wuyi metallogenic belt and suggest that porphyry and skarn scheelite deposits should be considered the principal exploration targets in this area.  相似文献   

10.
Abstract. Mineral assemblage, precipitation sequence and textures of the gold‐bearing veins from the Hishikari epithermal vein‐type deposits, southern Kyushu, Japan, were examined. In addition, fluid inclusion microthermometry and carbon and oxygen isotopic compositions of calcite were determined. Calcite, and that replaced by quartz, were commonly observed throughout the precipitation sequence of the veins. Thus, calcite must be a more common gangue constituent initially than observed presently. Association of calcite and electrum is observed immediately subsequent to columnar adularia in some vein samples. In addition, close association of electrum with pseudo‐acicular quartz, and electrum with truscottite were observed. The initial coprecipitation of electrum and calcite might be a common phenomenon in the gold‐bearing veins at the Hishikari deposits. The Th (homogenization temperature) data from the Honko‐Sanjin deposits are generally higher than those from the Yamada deposit. Samples that show association of calcite and electrum yielded higher Th (206–217°C, average) than the Th data from calcite associated with low‐grade Au ore or barren (180–204°C, average). The measured Tm (temperature of last melting point of ice) range from ‐0.4 to 0.0°C. The result suggests that the salinity of the hydrothermal solution was low during the precipitation both of calcite associated with Au mineralization and of barren calcite. Fluid inclusion evidence suggestive of boiling of hydrothermal solution for the precipitation of calcite was not recognized in the present work. The δ13C and δ18O values of calcite range from ‐10.8 to —4.7 % and from +3.2 to +15.2 %, respectively. The δ13C value of H2CO3 and the δ18O value of H2O in the hydrothermal fluids calculated assuming isotopic equilibrium with calcite using the temperature obtained by fluid inclusion microthermometry, range from ‐14.4 to ‐9.1 %, and from ‐6.2 to +5.5 %, respectively. Thus, the calculated δ18O values of H2O for calcite further confirm the presence of the 18O‐enriched ore fluids during the mineralization at the Hishikari deposits. The hydrothermal solution isotopically equilibrated with the sedimentary basement rocks was responsible for the gold mineralization associated with calcite.  相似文献   

11.
The Dalradian and Ordovician–Silurian metamorphic basement rocks of southwest Scotland and Northern Ireland host a number of base‐metal sulphide‐bearing vein deposits associated with kilometre‐scale fracture systems. Fluid inclusion microthermometric analysis reveals two distinct fluid types are present at more than half of these deposits. The first is an H2O–CO2–salt fluid, which was probably derived from devolatilization reactions during Caledonian metamorphism. This stage of mineralization in Dalradian rocks was associated with base‐metal deposition and occurred at temperatures between 220 and 360°C and pressures of between 1.6 and 1.9 kbar. Caledonian mineralization in Ordovician–Silurian metamorphic rocks occurred at temperatures between 300 and 360°C and pressures between 0.6 and 1.9 kbar. A later, probably Carboniferous, stage of mineralization was associated with base‐metal sulphide deposition and involved a low to moderate temperature (Th 70 to 240°C), low to moderate salinity (0 to 20 wt% NaCl eq.), H2O–salt fluid. The presence of both fluids at many of the deposits shows that the fractures hosting the deposits acted as long‐term controls for fluid migration and the location of Caledonian metalliferous fluids as well as Carboniferous metalliferous fluids. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

12.
The Zimudang gold deposit is a large Carlin‐type gold deposit in the Southwest Guizhou Province, China, with an average Au content of 6.2 g/t. Gold is mainly hosted in the fault zone and surrounding strata of the F1 fault and Permian Longtan Formation, and the ore bodies are strictly controlled by both the faults and strata. Detailed mineralogy and geochemistry studies are conducted to help judge the nature of ore‐forming fluids. The results indicate that the Au is generally rich in the sulfides of both ores and wall rocks in the deposit, and the arsenian pyrite and arsenopyrite are the main gold‐bearing sulfides. Four subtypes of arsenian pyrite are found in the deposit, including the euhedral and subhedral pyrite, framboidal pyrite, pyrite aggregates and pyrite veins. The euhedral and subhedral pyrite, which can take up about 80% of total pyrite grains, is the dominant type. Au distributed unevenly in the euhedral and subhedral pyrite, and the content of the Au in the rim is relatively higher than in the core. Au in the pyrite veins and pyrite aggregates is lower than the euhedral and subhedral pyrite. No Au has been detected in the points of framboidal pyrites in this study. An obvious highly enriched As rim exists in the X‐ray images of euhedral pyrites, implying the ore‐forming fluids may be rich in As. The relationship between Au and As reveals that the Au may host as a solid solution (Au+) and nanoparticles of native gold (Au0) in the sulfides. The high Co/Ni ratio (>1) of sulfides and the enrichment of W in the ores all reflect that the gold‐bearing minerals and ore‐forming process were mainly related to the hydrothermal fluids, but the magmatic and volcanic activities cannot be neglected. The general existence of Au and As in the sulfides of both ores and wall rocks and the REE results suggest that the ore‐forming fluids may mainly be derived from the basin itself. The enrichment of Tl suggests that the ore‐forming fluids may be enriched in Cl. The Ce and Eu show slightly or apparently negative anomalies, which means the ore fluids were probably formed under reducing environment. The Y/Ho ratios of ore samples fluctuate around 28, implying the bicarbonate complexation and fluorine were both involved in the ore‐forming process. Combined with the previous studies and our results, we infer that the ore‐forming fluids enriched Au, As, HS? and halogen (F, Cl) were derived from the mixture of reducing basinal fluids and magmatic or volcanic hydrothermal fluids.  相似文献   

13.
Epithermal high-sulfidation gold–copper deposits at the Chinkuashih area in northeastern Taiwan occur both within Pleistocene andesite and Miocene sedimentary rocks. Spatially associated Penshan and Shumei deposits of a major gold–copper vein, the “Main Vein”, were both mineralized along an extended normal fault zone. These deposits appear to have formed from the same original hydrothermal fluids, but in different host rock types. However, the results of trace element analyses indicate that the andesite-hosted Penshan deposit has distinctly higher ore-metal and lower LREE contents than the sediment-hosted Shumei deposit. The development of higher grade ore at Penshan deposit resulted from the presence of ferrous Fe-rich minerals in andesite that caused the deposition of a larger amount of pyrite and gold during the sulfidation–reduction reactions of acidic fluid with host rocks. Moreover, the porous–permeable silicic alteration facies of the Penshan deposit provided conduits for the circulation of ore-metal bearing fluids and the trapping of metal-bearing magmatic volatile to precipitate ore minerals. On the other hand, the higher LREE contents of the Shumei open pit reflect the low pH and abundance of mainly SO42? ion in the hydrothermal fluid perhaps because sedimentary host rocks were not able to neutralize and to reduce the acidic fluid effectively through the reactions of fluid and host rocks. Moreover, the Fe-poor host rocks have lower capacity to consume H2S and precipitate pyrite and gold. In addition, the circulation of ore-metal bearing fluids and trapping of metal-bearing magmatic volatile to precipitate ore minerals could be handicapped by the low permeability and porosity of the silicified sedimentary rocks. It is apparent from these observations that physical and chemical characteristics of host rocks are important factors in controlling the ore grade of the Chinkuashih high-sulfidation gold–copper deposits.  相似文献   

14.
玻利维亚的铜矿规模以中小型为主,主要成矿类型为红层型(砂岩层)、沉积相关脉状型、VMS型和IOCG型等。金矿规模以中小型为主,主要成矿类型有火山成因浅成热液型、与深成岩相关的脉状矿床、造山型矿床和砂金矿。锡矿发育众多大型、超大型矿床,成矿类型以玻利维亚型多金属脉状矿床和与长英质深成岩相关的脉状矿床为主,少量砂锡矿。铁矿以El Mutún超大型BIF型铁锰矿著称。西科迪勒拉和玻利维亚高原有重要的浅成低温热液贵金属资源潜力;东科迪勒拉北部主要为钨、锡、金、锑资源,中部为锡、银、金、锑资源,南部有金、锑、银、铅、锌潜力;次安第斯带南部有银-锌资源潜力;查科-贝尼平原带有广泛的砂金矿资源;前寒武纪克拉通内金、铂、镍、钽、铜和铁锰资源潜力丰富。  相似文献   

15.
包村和朝山金矿床位于安徽铜陵狮子山矿田，属于夕卡型岩金矿床，侵入岩体分别为包村石英闪长岩体和白芒山辉石闪长岩体。通过矿相鉴定和电子探针分析，对矿床中的自然金进行了详细的观察和研究。结果表明，在两个矿床中，金矿物均以独立的自然金颗粒形式产出，且常具有“银边结构”，但在自然金的嵌布方式、载体矿物、形态、大小、金银含量变化和成色等方面表现出显著差别。根据自然金的不同特征，对金矿床的成因进行分类，包村金矿床属于Cu-Au共生，而朝山矿床为Cu-Pb-Zn-Au共生型金矿床。不同矿床不同的金产状主要是由于金的运移、络合物种类、温度、pH和金银络合物活度比值等因素赞成的。此外，包村矿床和朝山矿床在地表均遭受氧化作用形成表生矿床，其表生金成色均明显高于原生金，且成分均一。  相似文献   

16.
青海大场金矿床地质特征及成因探讨   总被引：6，自引：1，他引：5  
青海大场金矿床位于北巴颜喀拉造山带的中段,为区域印支造山过程晚期Au-Sb成矿作用的产物.该矿床为具有层控性和受断裂构造、隐伏岩浆活动控制的金矿床.矿体主要呈脉状、似脉状和透镜状赋存于三叠系巴颜喀拉群砂岩板岩互层组内,并严格受断裂破碎带的控制.大场金矿床先后经历了金、锑2期矿化,矿化平均成矿深度分别为5.9km和6.9 km,锑矿化深度略浅于金矿化.成矿流体总体属中温、较低盐度、低密度的CO2-H2O-N2-H2S-CH4±CO±有机碳氢化合物体系.该矿床与造山型金矿具有相似的地质地球化学特征,其金矿化属造山型金矿的中成矿化,其锑矿化为造山型金矿的浅成矿化.  相似文献   

17.
The Huai Kham On gold deposit is located in the central part of the Sukhothai Fold Belt, northern Thailand. The Sukhothai Fold Belt represents an accretionary complex formed by subduction and collision between the Indochina and Sibumasu Terranes. There are many small gold deposits in the Sukhothai Fold Belt; however, the styles and formation environments of those gold deposits are not clear. The geology of the Huai Kham On deposit consists of volcanic and volcanosedimentary rocks, limestone, and low‐grade metamorphic rocks of Carboniferous to Triassic age. Gold‐bearing quartz veins are hosted by volcanic and volcanosedimentary rocks. The quartz veins can be divided into four stages. The mineral assemblage of the gold‐bearing quartz veins of Stages I and II comprises quartz, calcite, illite, pyrite, native gold, galena, chalcopyrite, and sphalerite. Quartz veins of Stage III consist of microcrystalline quartz, dolomite, calcite, pyrite, native gold, and chalcopyrite. Veins of Stage IV consist of calcite, dolomite, chlorite, and quartz. Fluid inclusions in quartz veins are classified into liquid‐rich two‐phase (Types IA and IB), carbonic‐aqueous (Type II), and carbonic (Type III) fluid inclusions. The homogenization temperatures of Types IA and II fluid inclusions that are related to the gold‐bearing quartz veins from Stages I to III ranged from 240° to 280°C. The δ18O values of quartz veins of Stages I to III range from +12.9 to +13.4‰, suggesting the presence of a homogeneous hydrothermal solution without temperature variation such as a decrease of temperature during the formation of gold‐bearing quartz veins from Stages I to III in the Huai Kham On gold deposit. Based on the calculated formation temperature of 280°C, the δ18O values of the hydrothermal solution that formed the gold‐bearing quartz veins range from +3.2 to +3.7‰, which falls into the range of metamorphic waters. The gold‐bearing quartz veins of the Huai Kham On deposit are interpreted to be the products of metamorphic water.  相似文献   

18.
The Dongmozhazhua deposit, the largest Pb–Zn deposit in south Qinghai, China, is stratabound, carbonate‐hosted and associated with epigenetic dolomitization and silicification of Lower–Middle Permian—Upper Triassic limestones in the hanging walls of a Cenozoic thrust fault system. The mineralization is localized in a Cenozoic thrust‐folded belt along the northeastern edge of the Tibetan plateau, which was formed due to the India–Asia plate collision during the early Tertiary. The deposit comprises 16 orebodies with variable thicknesses (1.5–26.3 m) and lengths (160–1820 m). The ores occur as dissemination, vein, and breccia cement. The main sulfide assemblage is sphalerite + galena + pyrite + marcasite ± chalcopyrite ± tetrahedrite, and gangue minerals consist mainly of calcite, dolomite, barite, and quartz. Samples of pre‐ to post‐ore stages calcite yielded δ13C and δ18O values that are, respectively, similar to and lower than those yielded by the host limestones, suggesting that the calcite formed from fluids derived from carbonate dissolution. Fluid inclusions in calcite and sphalerite in the polymetallic sulfidization stage mostly comprise liquid and gas phases at room temperature, with moderate homogenization temperatures (100–140°C) and high salinities (21–28 wt% NaCl eq.). Micro‐thermometric fluid inclusion data point to polysaline brines as ore‐forming fluids. The δD and δ18O values of ore fluids, cation compositions of fluid inclusions, and geological information suggest two main possible fluid sources, namely basinal brines and evaporated seawater. The fluid inclusion data and regional geology suggest that basinal brines derived from Tertiary basins located southeast of the Dongmozhazhua deposit migrated along deep detachment zones of the regional thrust system, leached substantial base metals from country rocks, and finally ascended along thrust faults at Dongmozhazhua. There, the base‐metal‐rich basinal brines mixed with bacterially‐reduced H2S‐bearing fluids derived from evaporated seawater preserved in the Permo–Triassic carbonate strata. The mixing of the two fluids resulted in Pb–Zn mineralization. The Dongmozhazhua Pb–Zn deposit has many characteristics that are similar to MVT Pb–Zn deposits worldwide.  相似文献   

19.
The Early Cretaceous Duolong gold‐rich porphyry copper deposit is a newly discovered deposit with proven 5.38 Mt Cu resources of 0.72% Cu and 41 t gold of 0.23 g t?1 in northern Tibet. Granodiorite porphyry and quartz diorite porphyrite are the main ore‐bearing porphyries. A wide range of hydrothermal alteration associated with these porphyries is divided into potassic, argillic and propylitic zones from the ore‐bearing porphyry center outward and upward. In the hydrothermal alteration zones, secondary albite (91.5–99.7% Ab) occurs along the rim of plagioclase phenocryst and fissures. Secondary K‐feldspar (75.1–96.9% Or) replaces plagioclase phenocryst and matrix or occurs in veinlets. Biotite occurs mainly as matrix and veinlet in addition to phenocryst in the potassic zone. The biotite are Mg‐rich and formed under a highly oxidized condition at temperatures ranging from 400°C to 430°C. All the biotites are absent in F, and have high Cl content (0.19–0.26%), with log (XCl/XOH) values of ?2.74 to ?2.88 and IV (Cl) values of ?3.48 to ?3.35, suggesting a significant role of chloride complexes (CuCl2‐ and AuCl2‐) in transporting and precipitating copper and gold. Chlorites are present in all alteration zones and correspond mainly to pycnochlorite. They have similar Fe/(Fe+Mg), Mn/(Mn+Mg) ratios, and a formation temperature range of 280–360°C. However, the formation temperature of chlorite in the quartz‐gypsum‐carbonate‐chlorite vein is between 190°C and 220°C, indicating that it may have resulted from a later stage of hydrothermal activity. Fe3+/Fe2+ ratios of chlorites have negative correlation with AlIV, suggesting oxygen fugacity of fluids increases with decreasing temperature. Apatite mineral inclusions in the biotite phenocrysts show high SO3 content (0.44–0.82%) and high Cl content (1–1.37%), indicating the host magma had a high oxidation state and was enriched in S and Cl. The highest Cl content of apatite in the propylitic zone may have resulted from pressure decrease, and the lowest Cl content of apatite in the argillic zone may have been caused by a low Cl content in the fluids. The low concentration of SO3 content in the hydrothermal apatite compared to the magmatic one may have resulted from the decrease of oxygen fugacity and S content in the hydrothermal fluid, which are caused by the abundant precipitation of magnetite.  相似文献   

20.
The Darreh‐Zereshk (DZ) and Ali‐Abad (AB) porphyry copper deposits are located in southwest of the Yazd city, central Iran. These deposits occur in granitoid intrusions, ranging in composition from quartz monzodiorite through granodiorite to granite. The ore‐hosting intrusions exhibit intense hydrofracturing that lead to the formation of quartz‐sulfide veinlets. Fluid inclusions in hydrothermal quartz in these deposits are classified as a mono‐phase vapor type (Type I), liquid‐rich two phase (liquid + vapor) type (Type IIA), vapor‐rich two phase (vapor + liquid) type (Type IIB), and multi‐phase (liquid + vapor + halite + sylvite + hematite + chalcopyrite and pyrite) type (Types III). Homogenization temperatures (Th) and salinity data are presented for fluid inclusions from hydrothermal quartz veinlets associated with potassic alteration and other varieties of hypogene mineralization. Ore precipitation occurred between 150° to >600°C from low to very high salinity (1.1–73.9 wt% NaCl equivalent) aqueous fluids. Two stages of hydrothermal activity characterized are recognized; one which shows relatively high Th and lower salinity fluid (Type IIIa; Th(L‐V) > Tm(NaCl)); and one which shows lower Th and higher salinity (Type IIIb; Th(L‐V) < Tm(NaCl)). The high Th(L‐V) and salinities of Type IIIa inclusions are interpreted to represent the initial existence of a dense fluid of magmatic origin. The coexistence of Type IIIb, Type I and Type IIB fluid inclusions suggest that these inclusions resulted either from trapping of boiling fluids and/or represent two immiscible fluids. These processes probably occurred as the result of pressure fluctuations from lithostatic to hydrostatic conditions under a pressure of 200 to 300 bar. Dilution of these early fluids by meteoritic water resulted in lower temperatures and low to moderate salinity (<20 wt% NaCl equiv.) fluids (Type IIA). Fluid inclusion analysis reveals that the hydrothermal fluid, which formed mineralized quartz veinlets in the rocks with potassic alteration, had temperatures of ～500°C and salinity ～50 wt% NaCl equiv. Cryogenic SEM‐EDS analyses of frozen and decrepitated ore‐bearing fluids trapped in the inclusions indicate the fluids were dominated with NaCl, and KCl with minor CaCl2.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号