首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 703 毫秒
1.
The coexistence of magmatic anhydrite and sulfide minerals in non-arc-related mafic magmas has only rarely been documented. Likewise the S isotope fractionation between sulfate and sulfide in mafic rocks has infrequently been measured. In the Kharaelakh intrusion associated with the world-famous Noril’sk ore district in Siberia coexisting magmatic anhydrite and sulfide minerals have been identified. Sulfur isotope compositions of the anhydrite-sulfide assemblages have been measured via both ion microprobe and conventional analyses to help elucidate the origin of the anhydrite-sulfide pairs. Magmatic anhydrite and chalcopyrite are characterized by δ34S values between 18.8‰ and 22.8‰, and 9.3‰ and 13.2‰, respectfully. Coexisting anhydrite and chalcopyrite show Δ values that fall between 8.5‰ and 11.9‰. Anhydrite in the Kharaelakh intrusion is most readily explained by the assimilation of sulfate from country rocks; partial reduction to sulfide led to mixing between sulfate-derived sulfide and sulfide of mantle origin. The variable anhydrite and sulfide δ34S values are a function of differing degrees of sulfate reduction, variable mixing of sulfate-derived and mantle sulfide, incomplete isotopic homogenization of the magma, and a lack of uniform attainment of isotopic equilibrium during subsolidus cooling. The δ34S values of sulfide minerals have changed much less with cooling than have anhydrite values due in large part to the high sulfide/sulfate ratio. Variations in both sulfide and anhydrite δ34S values indicate that isotopically distinct domains existed on a centimeter scale. Late stage hydrothermal anhydrite and pyrite also occur associated with Ca-rich hydrous alteration assemblages (e.g., thomsonite, prehnite, pectolite, epidote, xonotlite). δ34S values of secondary hydrothermal anhydrite and pyrite determined by conventional analyses are in the same range as those of the magmatic minerals. Anhydrite-pyrite Δ values are in the 9.1-10.1‰ range, and are smaller than anticipated for the low temperatures indicated by the silicate alteration assemblages. The small Δ values are suggestive of either sulfate-sulfide isotopic disequilibrium or closure of the system to further exchange between ∼550 and 600 °C. Our results confirm the importance of the assimilation of externally derived sulfur in the generation of the elevated δ34S values in the Kharaelakh intrusion, but highlight the sulfur isotopic variability that may occur in magmatic systems. In addition, our results confirm the need for more precise experimental determination of sulfate-sulfide sulfur isotope fractionation factors in high-T systems.  相似文献   

2.
Sulfur isotope compositions of pumice and adsorbed volatiles on ash from the first historical eruption of Anatahan volcano (Mariana arc) are presented in order to constrain the sources of sulfur erupted during the period 10-21 May, 2003. The isotopic composition of S extracted from erupted pumice has a narrow range, from δ34SV-CDT +2.6‰ to +3.2‰, while the composition of sulfur adsorbed onto ash has a larger range (+2.8‰ to +5.3‰). Fractionation modeling for closed and open system scenarios suggests that degassing of SO2 raised the δ34SV-CDT value of S dissolved in the melt from an initial composition of between +1.6‰ and +2.6‰ for closed-system degassing, or between −0.5‰ and +1.5‰ for open-system degassing, however closed-system degassing is the preferred model. The calculated values for the initial composition of the magma represent a MORB-like (δ34SV-CDT ∼ 0‰) mantle source with limited contamination by subducted seawater sulfate (δ34SV-CDT +21‰). Modeling also suggests that the δ34SV-CDT value of SO2 gas in closed-system equilibrium with the degassed magma was between +0.9‰ and +2.5‰. The δ34SV-CDT value of sulfate adsorbed onto ash in the eruption plume (+2.8‰ to +5.1‰) is consistent with sulfate formation by oxidation of magmatic SO2 in the eruption column. The sulfur isotope composition of sulfate adsorbed to ash changes from lower δ34S values for ash erupted early in the eruption to higher δ34S values for ash erupted later in the eruption. We interpret the temporal/stratigraphic change in sulfate isotopic composition to primarily reflect a change in the isotopic composition of magmatic SO2 released from the progressively degassing magma and is attributed to the expulsion of an accumulated gas phase at the beginning of the eruption. More efficient oxidation of magmatic SO2 gas to sulfate in the early water-rich eruption plume probably contributed to the change in S isotope compositions observed in the ash leachates.  相似文献   

3.
Previous studies of both ore and non-ore-bearing intrusives in the Permo-Triassic flood basalts of the Siberian platform in the Noril’sk area have shown that high-grade Ni-Cu-platinum group elements (PGE) mineralization is associated with anomalously high δ34S values of ∼8 to 12‰. In addition, several researchers have proposed that observed depletions in the Cu, Ni, and PGE content of basaltic lavas of the Nadezhdinsky (Nd) Formation are related to diffusional exchange with, and upgrading in metal tenor of, sulfides in the volcanic conduit system. Sulfur isotopic studies of the lavas at Noril’sk were initiated to determine if interaction with crustally derived sulfur in the conduit system was evident, and if the Nd lavas in particular were characterized by an anomalous isotopic signature. δ34S values of the lavas range from −4.5 to 8.7‰ Vienna Cañon Diablo Troilite (VCDT), with S concentrations from <40 to 1373 ppm. The majority of δ34S values range from 0 to 4‰, and are similar to those from S-poor intrusions in the Noril’sk area. Although textural data are not supportive of early sulfide saturation and the presence of immiscible sulfide droplets in the lavas, recrystallization may have erased expected mineralogical and textural evidence. Mineralogical data indicate that hydrothermal alteration of the lavas has occurred, but S redistribution has been restricted to localized areas and δ34S values have not been affected. The relatively low S concentrations of the lavas are thought to be due in large part to degassing of the lavas in the shallow conduit system and during eruption. Our calculations are consistent with the premise that degassing of basaltic magmas at temperatures in excess of ∼900°C at QFM leads to only minor 34S-depletion of sulfur remaining in the melt, and decreases in δ34S values of less than 2‰ at 90% degassing. For this reason all lavas with δ34S values in excess of ∼ 2‰ require a contribution of 34S-enriched country rock sulfur. Because of the high S content and δ34S value (∼ 16-20‰) of evaporites in the country rocks at Noril’sk, contamination of less than 0.5% is required to explain the most 34S-enriched lavas. The Nd lavas have an average δ34S of 2.9‰, but show no difference in S isotopic composition relative to the other lavas, suggesting that metal depletion involved only limited S transfer, or that exchange between mantle-derived S and S of crustal origin buffered δ34S values to less than ∼5‰. Anomalously positive δ34S values, similar to those of the ore-bearing intrusives in the Noril’sk region, are not consistently found in low-S rocks, either lavas or intrusives. Although the mechanism for the derivation of sulfide in the ore-bearing intrusions remain speculative, it is clear that the formation of sulfide ores characterized by high metal tenors proceeded only in the presence of sulfur of crustal origin.  相似文献   

4.
Sulfide sulfur in mid-oceanic ridge hydrothermal vents is derived from leaching of basaltic-sulfide and seawater-derived sulfate that is reduced during high temperature water rock interaction. Conventional sulfur isotope studies, however, are inconclusive about the mass-balance between the two sources because 34S/32S ratios of vent fluid H2S and chimney sulfide minerals may reflect not only the mixing ratio but also isotope exchange between sulfate and sulfide. Here, we show that high-precision analysis of S-33 can provide a unique constraint because isotope mixing and isotope exchange result in different Δ33S (≡δ33S-0.515 δ34S) values of up to 0.04‰ even if δ34S values are identical. Detection of such small Δ33S differences is technically feasible by using the SF6 dual-inlet mass-spectrometry protocol that has been improved to achieve a precision as good as 0.006‰ (2σ).Sulfide minerals (marcasite, pyrite, chalcopyrite, and sphalerite) and vent H2S collected from four active seafloor hydrothermal vent sites, East Pacific Rise (EPR) 9-10°N, 13°N, and 21°S and Mid-Atlantic Ridge (MAR) 37°N yield Δ33S values ranging from −0.002 to 0.033 and δ34S from −0.5‰ to 5.3‰. The combined δ34S and Δ33S systematics reveal that 73 to 89% of vent sulfides are derived from leaching from basaltic sulfide and only 11 to 27% from seawater-derived sulfate. Pyrite from EPR 13°N and marcasite from MAR 37°N are in isotope disequilibrium not only in δ34S but also in Δ33S with respect to associated sphalerite and chalcopyrite, suggesting non-equilibrium sulfur isotope exchange between seawater sulfate and sulfide during pyrite precipitation. Seafloor hydrothermal vent sulfides are characterized by low Δ33S values compared with biogenic sulfides, suggesting little or no contribution of sulfide from microbial sulfate reduction into hydrothermal sulfides at sediment-free mid-oceanic ridge systems. We conclude that 33S is an effective new tracer for interplay among seawater, oceanic crust and microbes in subseafloor hydrothermal sulfur cycles.  相似文献   

5.
The Palinuro volcanic complex and the Panarea hydrothermal field, both located in the Tyrrhenian Sea (Italy), are associated with island arc magmatism and characterized by polymetallic sulfide mineralization. Dissolved sulfide concentrations, pH, and Eh measured in porewaters at both sites reveal a variable hydrothermal influence on porewater chemistry.Multiple sulfur isotopic measurements for disseminated sulfides (CRS: chromium reducible sulfur) extracted from sediments at Palinuro yielded a broad range in δ34S range between ?29.8 and + 10.2‰ and Δ33S values between + 0.015 and + 0.134‰. In contrast, sediments at Panarea exhibit a much smaller range in δ34SCRS with less negative values between ?11.3 and ?1.8‰. The sulfur isotope signatures are interpreted to reflect a mixture between hydrothermal and biogenic sulfide, with a more substantial biogenic contribution at Panarea.Multiple sulfur isotope measurements were performed on sulfides and elemental sulfur from drill core material from the Palinuro massive sulfide complex. δ34S and Δ33S values for pyrite between ?32.8 and ?1.1‰ and between ?0.012 to + 0.042‰, respectively, as well as for elemental sulfur with δ34S and Δ33S values between ?26.7 and ?2.1‰ and between + 0.035 and + 0.109‰, respectively, point to a microbial origin for much of the sulfide and elemental sulfur studied. Moreover, data suggest a coupling of bacterial sulfate reduction, sulfide oxidation and sulfur disproportionation. In addition, δ34S values for barite between + 25.0 and + 63.6‰ are also in agreement with high microbial turnover of sulfate at Palinuro.Although a magmatic SO2 contribution towards the formation of the Palinuro massive sulfide complex is very likely, the activity of different sulfur utilizing microorganisms played a fundamental role during its formation. Thus, porewater and multiple sulfur isotope data reveal differences in the hydrothermal activity at Palinuro and Panarea drill sites and underline the importance of microbial communities for the origin of massive sulfide mineralizations in the hydrothermal subsurface.  相似文献   

6.
At Lucky Strike near the Azores Triple Junction, the seafloor setting of the hydrothermal field in a caldera system with abundant low-permeability layers of cemented breccia, provides a unique opportunity to study the influence of subsurface geological conditions on the hydrothermal fluid evolution. Coupled analyses of S isotopes performed in conjunction with Se and Fe isotopes have been applied for the first time to the study of seafloor hydrothermal systems. These data provide a tool for resolving the different abiotic and potential biotic near-surface hydrothermal reactions. The δ34S (between 1.5‰ and 4.6‰) and Se values (between 213 and 1640 ppm) of chalcopyrite suggest a high temperature end-member hydrothermal fluid with a dual source of sulfur: sulfur that was leached from basaltic rocks, and sulfur derived from the reduction of seawater sulfate. In contrast, pyrite and marcasite generally have lower δ34S within the range of magmatic values (0 ± 1‰) and are characterized by low concentrations of Se (<50 ppm). For 82Se/76Se ratios, the δ82Se values range from basaltic values of near −1.5‰ to −7‰. The large range and highly negative values of hydrothermal deposits observed cannot be explained by simple mixing between Se leached from igneous rock and Se derived from seawater. We interpret the Se isotope signature to be a result of leaching and mixing of a fractionated Se source located beneath hydrothermal chimneys in the hydrothermal fluid. At Lucky Strike we consider two sources for S and Se: (1) the “end-member” hydrothermal fluid with basaltic Se isotopic values (−1.5‰) and typical S isotope hydrothermal values of 1.5‰; (2) a fractionated source hosted in subsurface environment with negative δ34S values, probably from bacterial reduction of seawater sulfate and negative δ82Se values possibly derived from inorganic reduction of Se oxyanions. Fluid trapped in the subsurface environment is conductively cooled and has restricted mixing and provide favorable conditions for subsurface microbial activity which is potentially recorded by S isotopes. Fe isotope systematic reveals that Se-rich high temperature samples have δ57Fe values close to basaltic values (∼0‰) whereas Se-depleted samples precipitated at medium to low temperature are systematically lighter (δ57Fe values between −1 to −3‰). An important implication of our finding is that light Fe isotope composition down to −3.2‰ may be explained entirely by abiotic fractionation, in which a reservoir effect during sulfide precipitation was able to produce highly fractionated compositions.  相似文献   

7.
Evaluation of the extent of volatile element recycling in convergent margin volcanism requires delineating likely source(s) of magmatic volatiles through stable isotopic characterization of sulfur, hydrogen and oxygen in erupted tephra with appropriate assessment of modification by degassing. The climactic eruption of Mt. Mazama ejected approximately 50 km3 of rhyodacitic magma into the atmosphere and resulted in formation of a 10-km diameter caldera now occupied by Crater Lake, Oregon (lat. 43°N, long. 122°W). Isotopic compositions of whole-rocks, matrix glasses and minerals from Mt. Mazama climactic, pre-climactic and postcaldera tephra were determined to identify the likely source(s) of H2O and S. Integration of stable isotopic data with petrologic data from melt inclusions has allowed for estimation of pre-eruptive dissolved volatile concentrations and placed constraints on the extent, conditions and style of degassing.Sulfur isotope analyses of climactic rhyodacitic whole rocks yield δ34S values of 2.8-14.8‰ with corresponding matrix glass values of 2.4-13.2‰. δ34S tends to increase with stratigraphic height through climactic eruptive units, consistent with open-system degassing. Dissolved sulfur concentrations in melt inclusions (MIs) from pre-climactic and climactic rhyodacitic pumices varies from 80 to 330 ppm, with highest concentrations in inclusions with 4.8-5.2 wt% H2O (by FTIR). Up to 50% of the initial S may have been lost through pre-eruptive degassing at depths of 4-5 km. Ion microprobe analyses of pyrrhotite in climactic rhyodacitic tephra and andesitic scoria indicate a range in δ34S from −0.4‰ to 5.8‰ and from −0.1‰ to 3.5‰, respectively. Initial δ34S values of rhyodacitic and andesitic magmas were likely near the mantle value of 0‰. Hydrogen isotope (δD) and total H2O analyses of rhyodacitic obsidian (and vitrophyre) from the climactic fall deposit yielded values οf −103 to −53‰ and 0.23-1.74 wt%, respectively. Values of δD and wt% H2O of obsidian decrease towards the top of the fall deposit. Samples with depleted δD, and mantle δ18O values, have elevated δ34S values consistent with open-system degassing. These results imply that more mantle-derived sulfur is degassed to the Earth’s atmosphere/hydrosphere through convergent margin volcanism than previously attributed. Magmatic degassing can modify initial isotopic compositions of sulfur by >14‰ (to δ34S values of 14‰ or more here) and hydrogen isotopic compositions by 90‰ (to δD values of −127‰ in this case).  相似文献   

8.
Previous geochemical and microbiological studies in the Cariaco Basin indicate intense elemental cycling and a dynamic microbial loop near the oxic-anoxic interface. We obtained detailed distributions of sulfur isotopes of total dissolved sulfide and sulfate as part of the on-going CARIACO time series project to explore the critical pathways at the level of individual sulfur species. Isotopic patterns of sulfate (δ34SSO4) and sulfide (δ34SH2S) were similar to trends observed in the Black Sea water column: δ34SH2S and δ34SSO4 were constant in the deep anoxic water (varying within 0.6‰ for sulfide and 0.3‰ for sulfate), with sulfide roughly 54‰ depleted in 34S relative to sulfate. Near the oxic-anoxic interface, however, the δ34SH2S value was ∼3‰ heavier than that in the deep water, which may reflect sulfide oxidation and/or a change in fractionation during in situ sulfide production through sulfate reduction (SR). δ34SH2S and Δ33SH2S data near the oxic-anoxic interface did not provide unequivocal evidence to support the important role of sulfur-intermediate disproportionation suggested by previous studies. Repeated observation of minimum δ34SSO4 values near the interface suggests ‘readdition’ of 34S-depleted sulfate during sulfide oxidation. A slight increase in δ34SSO4 values with depth extended over the water column may indicate a reservoir effect associated with removal of 34S-depleted sulfur during sulfide production through SR. Our δ34SH2S and Δ33SH2S data also do not show a clear role for sulfur-intermediate disproportionation in the deep anoxic water column. We interpret the large difference in δ34S between sulfate and sulfide as reflecting fractionations during SR in the Cariaco deep waters that are larger than those generally observed in culturing studies.  相似文献   

9.
We present multiple sulfur isotope measurements of sulfur compounds associated with the oxidation of H2S and S0 by the anoxygenic phototrophic S-oxidizing bacterium Chlorobium tepidum. Discrimination between 34S and 32S was +1.8 ± 0.5‰ during the oxidation of H2S to S0, and −1.9 ± 0.8‰ during the oxidation of S0 to , consistent with previous studies. The accompanying Δ33S and Δ36S values of sulfide, elemental sulfur, and sulfate formed during these experiments were very small, less than 0.1‰ for Δ33S and 0.9‰ for Δ36S, supporting mass conservation principles. Examination of these isotope effects within a framework of the metabolic pathways for S oxidation suggests that the observed effects are due to the flow of sulfur through the metabolisms, rather than abiotic equilibrium isotope exchange alone, as previously suggested. The metabolic network comparison also indicates that these metabolisms work to express some isotope effects (between sulfide, polysulfides, and elemental sulfur in the periplasm) and suppress others (kinetic isotope effects related to pathways for oxidation of sulfide to sulfate via the same enzymes involved in sulfate reduction acting in reverse). Additionally, utilizing fractionation factors for phototrophic S oxidation calculated from our experiments and for other oxidation processes calculated from the literature (chemotrophic and inorganic S oxidation), we constructed a set of ecosystem-scale sulfur isotope box models to examine the isotopic consequences of including sulfide oxidation pathways in a model system. These models demonstrate how the small δ34S effects associated with S oxidation combined with large δ34S effects associated with sulfate reduction (by SRP) and sulfur disproportionation (by SDP) can produce large (and measurable) effects in the Δ33S of sulfur reservoirs. Specifically, redistribution of material along the pathways for sulfide oxidation diminishes the net isotope effect of SRP and SDP, and can mask the isotopic signal for sulfur disproportionation if significant recycling of S intermediates occurs. We show that the different sulfide oxidation processes produce different isotopic fields for identical proportions of oxidation, and discuss the ecological implications of these results to interpreting minor S isotope patterns in modern systems and in the geologic record.  相似文献   

10.
Climate change in the SW USA is likely to involve drier conditions and higher surface temperatures. In order to better understand the evolution of water chemistry and the sources of aqueous SO4 in these semi-arid settings, chemical and S isotope compositions were determined of springs, groundwater, and bedrock associated with a Permian fractured carbonate aquifer located in the southern Sacramento Mountains, New Mexico, USA. The results suggest that the evolution of water chemistry in the semi-arid carbonate aquifer is mainly controlled by dedolomitization of bedrock, which was magnified by increasing temperature and increasing dissolution of gypsum/anhydrite along the groundwater flow path. The δ34S of dissolved SO4 in spring and groundwater samples varied from +9.0‰ to +12.8‰, reflecting the mixing of SO4 from the dissolution of Permian gypsum/anhydrite (+12.3‰ to +13.4‰) and oxidation of sulfide minerals (−24.5‰ to −4.2‰). According to S isotope mass balance constraints, the contribution of sulfide-derived SO4 was considerable in the High Mountain recharge areas, accounting for up to ∼10% of the total SO4 load. However, sulfide weathering decreased in importance in the lower reaches of the watershed. A smaller SO4 input of ∼2–4% was contributed by atmospheric wet deposition. This study implies that the δ34S variation of SO4 in semi-arid environments can be complex, but that S isotopes can be used to distinguish among the different sources of weathering. Here it was found that H2SO4 dissolution due to sulfide oxidation contributes up to 5% of the total carbonate weathering budget, while most of the SO4 is released from bedrock sources during dedolomitization.  相似文献   

11.
A laser fluorination microprobe system has been constructed for high-accuracy, high-precision multisulfur isotope analysis with improved spatial resolution. The system uses two lasers: (a) a KrF excimer laser for in situ spot analysis by ultraviolet (UV) photoablation with λ = 248 nm and (b) a CO2 laser for whole-grain analysis of powdered samples by infrared heating at λ = 10.6 μm. A CO2 laser is necessary for the analysis of interlaboratory isotope reference materials because they are supplied as powders. The δ34S and δ33S compositions of reference materials measured with a CO2 laser fluorination system agree (±0.2‰, 1σ) with the recommended values by the Sulfur Isotope Working Group of the International Atomic Energy Agency [Ding et al 2001] and [Taylor]. The precision of replicate analyses of powdered sulfide minerals with the CO2 laser is typically ±0.2‰ (1σ) for δ34S.The in situ fluorination of sulfides with a KrF excimer laser (λ = 248 nm) was validated by comparison of measurements of side-by-side laser craters and powders excavated from drill holes. Powders from drill holes were analyzed with the CO2 laser. In situ laser craters and drill hole powders give the same δ34SV-CDT and δ33SV-CDT values within 0.2‰. The δ34SV-CDT and δ33SV-CDT values of both powders and in situ analyses are independent of F2 gas pressure over a range of 15 to 65 torr. No dependence of δ34SV-CDT and δ33SV-CDT values on UV laser energy fluence has been observed. Mineral-specific fractionation of sulfur isotopes in analyzing pyrite, sphalerite, galena, troilite, and chalcopyrite has not been observed with a KrF excimer laser (λ = 248 nm). Test analyses with an ArF excimer laser (λ = 193 nm), however, gave fractionated sulfur isotope ratios.A range of Δ33S anomalies of from - 1.5 to +3.0‰ in Archean samples from the North Pole district, Pilbara Craton, Australia, and from black shale of the Lokamonna Formation, South Africa, were verified by in situ analysis of individual pyrite grains with a KrF excimer laser. These results show that a combination of high-accuracy, high-precision analyses with improved spatial resolution permits locating and analyzing host minerals of non-mass-dependent sulfur isotope anomalies.  相似文献   

12.
Concentrations of oceanic and atmospheric oxygen have varied over geologic time as a function of sulfur and carbon cycling at or near the Earth’s surface. This balance is expressed in the sulfur isotope composition of seawater sulfate. Given the near absence of gypsum in pre-Phanerozoic sediments, trace amounts of carbonate-associated sulfate (CAS) within limestones or dolostones provide the best available constraints on the isotopic composition of sulfate in Precambrian seawater. Although absolute CAS concentrations, which range from those below detection to ∼120 ppm sulfate in this study, may be compromised by diagenesis, the sulfur isotope compositions can be buffered sufficiently to retain primary values.Stratigraphically controlled δ34S measurements for CAS from three mid-Proterozoic carbonate successions (∼1.2 Ga Mescal Limestone, Apache Group, Arizona, USA; ∼1.45-1.47 Ga Helena and Newland formations, Belt Supergroup, Montana, USA; and ∼1.65 Ga Paradise Creek Formation, McNamara Group, NW Queensland, Australia) show large isotopic variability (+9.1‰ to +18.9‰, −1.1‰ to +27.3‰, and +14.1‰ to +37.3‰, respectively) over stratigraphic intervals of ∼50 to 450 m. This rapid variability, ranging from scattered to highly systematic, and overall low CAS abundances can be linked to sulfate concentrations in the mid-Proterozoic ocean that were substantially lower than those of the Phanerozoic but higher than values inferred for the Archean. Results from the Belt Supergroup specifically corroborate previous arguments for seawater contributions to the basin. Limited sulfate availability that tracks the oxygenation history of the early atmosphere is also consistent with the possibility of extensive deep-ocean sulfate reduction, the scarcity of bedded gypsum, and the stratigraphic δ34S trends and 34S enrichments commonly observed for iron sulfides of mid-Proterozoic age.  相似文献   

13.
The biogeochemistry of sedimentary sulfur was investigated on the continental shelf off central Chile at water depths between 24 and 88 m under partial influence of an oxygen minimum zone. Dissolved and solid iron and sulfur species, including the sulfur intermediates sulfite, thiosulfate, and elemental sulfur, were analyzed at high resolution in the top 20 cm. All stations were characterized by high rates of sulfate reduction, but only the sediments within the Bay of Concepción contained dissolved sulfide. Due to advection and/or in-situ reoxidation of sulfide, dissolved sulfate was close to bottom water values. Whereas the concentrations of sulfite and thiosulfate were mostly in the submicromolar range, elemental sulfur was by far the dominant sulfur intermediate. Although the large nitrate- and sulfur-storing bacteria Thioploca were abundant, the major part of S0 was located extracellularly. The distribution of sulfur species and dissolved iron suggests the reaction of sulfide with FeOOH as an important pathway for sulfide oxidation and sulfur intermediate formation. This is in agreement with the sulfur isotope composition of co-existing elemental sulfur and iron monosulfides. In the Bay of Concepción, sulfur isotope data suggest that pyrite formation proceeds via the reaction of FeS with polysulfides or H2S. At the shelf stations, on the other hand, pyrite was significantly depleted in 34S relative to its potential precursors FeS and S0. Isotope mass balance considerations suggest further that pyritization at depth includes light sulfide, potentially originating from bacterial sulfur disproportionation. The δ34S-values of pyrite down to −38‰ vs. V-CDT are among the lightest found in organic-rich marine sediments. Seasonal variations in the sulfur isotope composition of dissolved sulfate indicated a dynamic non-steady-state sulfur cycle in the surface sediments. The 18O content of porewater sulfate increased with depth at all sites compared to the bottom water composition due to intracellular isotope exchange reactions during microbial sulfur transformations.  相似文献   

14.
Substantial isotopic fractionations are associated with many microbial sulfur metabolisms and measurements of the bulk δ34S isotopic composition of sulfur species (predominantly sulfates and/or sulfides) have been a key component in developing our understanding of both modern and ancient biogeochemical cycling. However, the interpretations of bulk δ34S measurements are often non-unique, making reconstructions of paleoenvironmental conditions or microbial ecology challenging. In particular, the link between the μm-scale microbial activity that generates isotopic signatures and their eventual preservation as a bulk rock value in the geologic record has remained elusive, in large part because of the difficulty of extracting sufficient material at small scales. Here we investigate the potential for small-scale (∼100 μm-1 cm) δ34S variability to provide additional constraints for environmental and/or ecological reconstructions. We have investigated the impact of sulfate concentrations (0.2, 1, and 80 mM SO4) on the δ34S composition of hydrogen sulfide produced over the diurnal (day/night) cycle in cyanobacterial mats from Guerrero Negro, Baja California Sur, Mexico. Sulfide was captured as silver sulfide on the surface of a 2.5 cm metallic silver disk partially submerged beneath the mat surface. Subsequent analyses were conducted on a Cameca 7f-GEO secondary ion mass spectrometer (SIMS) to record spatial δ34S variability within the mats under different environmental conditions. Isotope measurements were made in a 2-dimensional grid for each incubation, documenting both lateral and vertical isotopic variation within the mats. Typical grids consisted of ∼400-800 individual measurements covering a lateral distance of ∼1 mm and a vertical depth of ∼5-15 mm. There is a large isotopic enrichment (∼10-20‰) in the uppermost mm of sulfide in those mats where [SO4] was non-limiting (field and lab incubations at 80 mM). This is attributed to rapid recycling of sulfur (elevated sulfate reduction rates and extensive sulfide oxidation) at and above the chemocline. This isotopic gradient is observed in both day and night enrichments and suggests that, despite the close physical association between cyanobacteria and select sulfate-reducing bacteria, photosynthetic forcing has no substantive impact on δ34S in these cyanobacterial mats. Perhaps equally surprising, large, spatially-coherent δ34S oscillations (∼20-30‰ over 1 mm) occurred at depths up to ∼1.5 cm below the mat surface. These gradients must arise in situ from differential microbial metabolic activity and fractionation during sulfide production at depth. Sulfate concentrations were the dominant control on the spatial variability of sulfide δ34S. Decreased sulfate concentrations diminished both vertical and lateral δ34S variability, suggesting that small-scale variations of δ34S can be diagnostic for reconstructing past sulfate concentrations, even when original sulfate δ34S is unknown.  相似文献   

15.
Upper Cretaceous Phosphorites from different localities in Egypt were analyzed for their rare earth elements (REEs) contents and sulfur and strontium isotopes to examine the effect of depositional conditions versus diagenesis on these parameters.The negative Ce and Eu anomalies of the study phosphorites suggest its formation under reducing conditions. However, chondrite-normalized REEs patterns show relative enrichments of LREEs over the HREEs, which is obviously different from the seawater REEs pattern suggesting post-depositional modifications on the REEs distributions during diagenesis. The difference in the REEs concentrations and Ce anomalies among the study localities as well as the similarity between the REEs patterns of these phosphorites and associated black shales might support this interpretation.The concentration of structural SO42− (0.6-3.7%) and their δ34S values (+0.5 to -20‰) in the upper Cretaceous phosphorites in Egypt suggest the formation of these phosphorites in the zone of sulfate reduction. On the other hand, the sulfur isotopes in the pyrite from the study phosphorites (δ34S = +4.6‰ − 23‰ with an average of −7.7‰) are attributed to the influence of seawater from which pyrite was formed during diagenesis. The difference between the δ34S values in the phosphorites (all are positive values) and those in the associated pyrite (mostly negative values) reflect an asymmetric sulfate and sulfide sulfur isotopic composition due to the formation of francolite (source of sulfate) and pyrite (source of sulfide) in different conditions and/or process.The 87Sr/86Sr values of the upper Cretaceous phosphorites in Egypt are very close to the marine values during the Campanian-Maastrichtian time and their average (0.707622) is more or less comparable to the average 87Sr/86Sr values of the Cretaceous-Eocene Tethyan phosphorites. This suggests no post-depositional alteration (i.e. diagenetic effect) on the Sr isotopic composition of these phosphorites.  相似文献   

16.
The discovery of 33S anomalies in Archean sedimentary rocks has established that the early Earth before ∼2.2 Ga (billion years ago) had a very different sulfur cycle than today. The origin of the anomalies and the nature of early sulfur cycle are, however, poorly known and debated. In this study, we analyzed the total sulfur and oxygen isotope compositions, the δ18O, Δ17O, δ34S, Δ33S, and Δ36S, for the >3.2 Ga Fig Tree barite deposits from the Barberton Greenstone Belt, South Africa. The goal is to address two questions: (1) was Archean barite sulfate a mixture of 33S-anomalous sulfate of photolysis origin and 33S-normal sulfate of other origins? (2) did the underlying photochemical reactions that generated the observed 33S anomalies for sulfide and sulfate also generate 17O anomalies for sulfate?We developed a new method in which pure barite sulfate is extracted for oxygen and sulfur isotope measurements from a mixture of barite sands, cherts, and other oxygen-bearing silicates. The isotope data reveal that (1) there is no distinct 17O anomaly for Fig Tree barite, with an average Δ17O value the same as that of the bulk Earth (−0.02 ± 0.07‰, N = 49); and (2) the average δ18O value is +10.6 ± 1.1‰, close to that of the modern seawater sulfate value (+9.3‰). Evidence from petrography and from the δ18O of barites and co-existing cherts suggest minimum overprinting of later metamorphism on the sulfate’s oxygen isotope composition. Assuming no other processes (e.g., biological) independently induced oxygen isotope exchange between sulfate and water, the lack of reasonable correlation between the δ18O and Δ33S or between the δ34S and Δ33S suggests two mutually exclusive scenarios: (1) An overwhelming majority of the sulfate in the Archean ocean was of photolysis origin, or (2) The early Archean sulfate was a mixture of 33S-normal sulfates and a small portion (<5%?) of 33S-anomalous sulfate of photolysis origin from the atmosphere. Scenario 1 requires that sulfate of photolysis origin must have had only small 33S or 36S anomalies and no 17O anomaly. Scenario 2 requires that the photolysis sulfate have had highly negative δ34S and Δ33S values, recommending future theoretical and experimental work to look into photochemical processes that generate sulfate in Quadrant I and sulfide in Quadrant III in a δ34S (X)-Δ33S (Y) Cartesian plane. A total sulfur and oxygen isotope analysis has provided constraints on the underlying chemical reactions that produced the observed sulfate isotope signature as well as the accompanying atmospheric, oceanic, and biological conditions.  相似文献   

17.
We present a 3-year study of concentrations and sulfur isotope values (δ34S, Δ33S, and Δ36S) of sulfur compounds in the water column of Fayetteville Green Lake (NY, USA), a stratified (meromictic) euxinic lake with moderately high sulfate concentrations (12-16 mM). We utilize our results along with numerical models (including transport within the lake) to identify and quantify the major biological and abiotic processes contributing to sulfur cycling in the system. The isotope values of sulfide and zero-valent sulfur across the redox-interface (chemocline) change seasonally in response to changes in sulfide oxidation processes. In the fall, sulfide oxidation occurs primarily via abiotic reaction with oxygen, as reflected by an increase in sulfide δ34S at the redox interface. Interestingly, S isotope values for zero-valent sulfur sampled at this time still reflect production and recycling by phototrophic S-oxidation. In the spring, sulfide S isotope values suggest an increased input from phototrophic oxidation, consistent with a more pronounced phototroph population at the chemocline. This trend is associated with smaller fractionations between sulfide and zero-valent sulfur, suggesting a metabolic rate control on fractionation similar to that for sulfate reduction. Comparison of our data with previous studies indicates that the S isotope values of sulfate and sulfide in the deep waters are remarkably stable over long periods of time, with consistently large fractionations of up to 58‰ in δ34S. Models of the δ34S and Δ33S trends in the deep waters (considering mass transport via diffusion and advection along with biological processes) require that these fractionations are a consequence of sulfur compound disproportionation at and below the redox interface in addition to large fractionations during sulfate reduction. The large fractionations during sulfate reduction appear to be a consequence of the high sulfate concentrations and the distribution of organic matter in the water column. The occurrence of disproportionation in the lake is supported by profiles of intermediate sulfur compounds and by lake microbiology, but is not evident from the δ34S trends alone. These results illustrate the utility of including minor S isotopes in sulfur isotope studies to unravel complex sulfur cycling in natural systems.  相似文献   

18.
In order to reconstruct paleo-environmental conditions for the saline playa lakes of the Rio Grande Rift, we investigated sediment sulfate sources using sulfur isotope compositions of dissolved ions in modern surface water, groundwater, and precipitated in the form of gypsum sediments deposited during the Pleistocene and Holocene in the Tularosa and Estancia Basins. The major sulfate sources are Lower and Middle Permian marine evaporites (δ34S of 10.9-14.4‰), but the diverse physiography of the Tularosa Basin led to a complex drainage system which contributed sulfates from various sources depending on the climate at the time of sedimentation. As inferred from sulfur isotope mass balance constraints, weathering of sulfides of magmatic/hydrothermal and sedimentary origin associated with climate oscillations during Last Glacial Maximum contributed about 35-50% of the sulfates and led to deposition of gypsum with δ34S values of −1.2‰ to 2.2‰ which are substantially lower than Permian evaporates. In the Estancia Basin, microbial sulfate reduction appears to overprint sulfur isotopic signatures that might elucidate past groundwater flows. A Rayleigh distillation model indicates that about 3-18% of sulfates from an inorganic groundwater pool (δ34S of 12.6-13.8‰) have been metabolized by bacteria and preserved as partially to fully reduced sulfur-bearing minerals species (elemental sulfur, monosulfides, disulfides) with distinctly negative δ34S values (−42.3‰ to −20.3‰) compared to co-existing gypsum (−3.8‰ to 22.4‰). For the Tularosa Basin microbial sulfate reduction had negligible effect on δ34S value of the gypsiferous sediments most likely because of higher annual temperatures (15-33 °C) and lower organic carbon content (median 0.09%) in those sediments leading to more efficient oxidation of H2S and/or smaller rates of sulfate reduction compared to the saline playas of the Estancia Basin (5-28 °C; median 0.46% of organic carbon).The White Sands region of the Tularosa Basin is frequently posited as a hydrothermal analogue for Mars. High temperatures of groundwater (33.3 °C) and high δ18O(H2O) values (1.1‰) in White Sands, however, are controlled predominantly by seasonal evaporation rather than the modern influx of hydrothermal fluids. Nevertheless, it is possible that some of the geochemical processes in White Sands, such as sulfide weathering during climate oscillations and upwelling of highly mineralized waters, might be considered as valid terrestrial analogues for the sulfate cycle in places such as Meridiani Planum on Mars.  相似文献   

19.
Abstract: The Lepanto Far Southeast porphyry Cu‐Au deposit is located beneath and to the southeast of the Lepanto enargite‐luzonite Cu–Au deposit in Mankayan, Benguet Province, Philippines. The principal orebody consists of potassic alteration subjected to partial retrograde chlorite alteration that rims stock‐work of quartz‐anhydrite veinlets. Fluid inclusions found in stockwork quartz and anhydrite in the biotitized orebody center are dominated by polyphase inclusions that homogenize at temperatures of >500C. Sulfur isotopic thermometry applied to the sulfides‐anhydrite pairs suggests around 500C. The principal ore minerals associated with quartz‐anhydrite stockworks are chalcopyrite and pyrite with minor bornite and Bi–Te–bearing tennantite, with trace of native gold. Rounded pyrite grains appear fractured and corroded and are interpreted as remnants of primary intermediate solid solution + pyrite assemblage. A breccia pipe truncates the deposit. Mineralization in the breccia pipe is brought by quartz‐anhydrite veinlets and infilling in the interstices between clasts. Chalcopyrite‐Au mineralization associated with molybdenite is recognized in the deeper zone in the breccia pipe. Fluid inclusion microthermometry on polyphase inclusions in veinlet quartz as well as sulfur isotope thermometry applied for the pair of anhydrite and sulfides suggests >450C. Fluid inclusions in veinlet quartz and anhydrite in the fringe advanced argillic alteration are chiefly composed of coexisting liquid‐rich inclusions and gas‐rich inclusions, in addition to coexisting polyphase inclusions and gas‐rich inclusions. These inclusions exhibit a wide range of homogenization temperatures, suggesting heterogeneous entrapping in the two‐fluid unmixing region. Sulfur isotopes of aqueous sulfide and sulfate exhibit a general trend from the smallest fractionation pairs (about 11%) in the biotitized orebody center to the largest fractionation (about 25%) pairs in the fringe advanced argillic alteration, suggesting a simple evolution of hydrothermal system. The slopes of arbitrary regression lines in δ34S versus 34S[SO4 = –H2S] diagram suggest that the abundance ratio of aqueous sulfate to sulfide in the hydrothermal fluid has been broadly constant at about 1:3 through temperature decrease. The intersection of these two regression lines at the δ34S axis indicates that the bulk δ34S is about +6%. Thus, the Lepanto FSE deposit is a further example which confirms enrichment in 34S in the hydrous intermediate to silicic magmas and associated magmatic hydrothermal deposits in the western Luzon arc.  相似文献   

20.
Laser sulfur combustion in the presence of O2 is the most commonly used method of in situ sulfur isotope analysis. Previous workers indicated that a small but reproducible fractionation of 34S/32S exists between the product SO2 gas and the mineral. The magnitude of this fractionation varies with bond strength, as reflected in Gibbs free energy of formation at 298.15K. The correction factors are known for common sulfides and anhydrite but not, hitherto, for stibnite and the sulfosalt minerals, which are important constituents of many classes of ore deposits. We present the correction factors for the following chemically and crystallographically well-characterized minerals: stibnite (weighted mean = −1.2‰), bournonite (+0.6‰), tetrahedrite (+1.3‰), and boulangerite (+1.4‰). The Gibbs free energies of formation of these phases have been approximated by the sulfide summation method, and the correlation of ΔG2980 with the correction factor for the sulfosalts fits well with the trend previously established for simple sulfides. There is an excellent correlation between the fractionation factor and mineral composition, a parameter that does result in bond strength variations (e.g., mol fraction of PbS in sulfosalts), allowing estimation of the correction factors for simple intermediate compositions. Finally, bond strength also varies with variation in interatomic distances, and we have, therefore, investigated the behaviour of stibnite, a strongly anisotropic mineral. Our results indicate that there is a significant variation in fractionation factor, depending on crystal orientation. The fractionation factor along the prismatic b-axis, which displays the strongest chemical bonds (as monitored by the shortest bond lengths), is more negative (−1.7‰) than along the other crystallographic directions (−0.7 to −1.0‰), which is in full agreement with theoretical predictions. We demonstrate the application of the technique in unravelling source- and process-related sulfur isotope systematics in two hydrothermal vein systems in the classic mining area of the NE Rhenish Massif, both studies requiring resolution beyond the scale of conventional sulfur isotope analysis.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号