首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The geometry and thermal history of fractures have been determined at 59 stations from Reykjavik to Hvalfjördur in southwestern Iceland. The data provide information on crustal stress regimes in the vicinity of mid-ocean ridges.Two major, generalized fracture orientations are present
1. (1) a northeast system, trend 010°–030°, except on Akranes where the orientation is 040°–060°
2. (2) a broad east—west system containing one or more sets with strike between 070°–130°.
Thermal history of the host rock and fractures was determined from secondary minerals in vugs and fractures. The thermal history indicates that the northeast fracture set opened while the area was within the relatively hot axial zone of active volcanism and rifting. Some of the east—west trending fractures also opened at this time but many formed later, after the area had begun to cool and drift from the active zone.The northeast fracture set is essentially parallel to the trend of dikes and normal faults in southwestern Iceland. They have been interpreted as extension fractures (resulting in about 0.4% maximum extension) forming generally from the same stress field associated with normal faulting and dike injection in the active zone. Fracturing in an east-west direction (estimated 0.1% maximum extension), mainly near the edge and outside the active zone, indicates a reorientation of this stress field. The dominant mechanism related to the origin of the east—west fractures may be thermoelastic stresses arising from axial and basal accretion and cooling of lithospheric plates.Both fracture systems are inferred to have formed, in the Griffiths idealization, under nearly biaxial effective compressive loading on the order of 200 bar. The discrepancy between this value and the kilobar-order strengths of short-time laboratory tests reflects such factors as high temperature stress corrosion and fatigue. Fracture propagation is assumed to have been stable, but governed primarily by lateral load-diminishing mechanisms rather than by progressive loading. These relaxation mechanisms may have been episodic (northeast-system fissure swarm activity) or steady-state (thermoelastic contraction) in time.  相似文献   

2.
W.P. Schellart   《Tectonophysics》2007,445(3-4):363-372
A geodynamic model exists, the westward lithospheric drift model, in which the variety of overriding plate deformation, trench migration and slab dip angles is explained by the polarity of subduction zones. The model predicts overriding plate extension, a fixed trench and a steep slab dip for westward-dipping subduction zones (e.g. Mariana) and predicts overriding plate shortening, oceanward trench retreat and a gentle slab dip for east to northeastward-dipping subduction zones (e.g. Chile). This paper investigates these predictions quantitatively with a global subduction zone analysis. The results show overriding plate extension for all dip directions (azimuth α = − 180° to 180°) and overriding plate shortening for dip directions with α = − 90° to 110°. The wide scatter in data negate any obvious trend and only local mean values in overriding plate deformation rate indicate that overriding plate extension is somewhat more prevalent for west-dipping slabs. West-dipping subduction zones are never fixed, irrespective of the choice of reference frame, while east to northeast-dipping subduction zones are both retreating and advancing in five out of seven global reference frames. In addition, westward-dipping subduction zones have a range in trench-migration velocities that is twice the magnitude of that for east to northeastward-dipping slabs. Finally, there is no recognizable correlation between slab dip direction and slab dip angle. East to northeast-dipping slabs (α = 30° to 120°) have shallow (0–125 km) slab dip angles in the range 10–60° and deep (125–670 km) slab dip angles in the range 40–82°, while west-dipping slabs (α = − 60° to − 120°) have shallow slab dip angles in the range 19–50° and deep slab dip angles in the range 25–86°. Local mean deep slab dip angles are nearly identical for east and west-dipping slabs, while local mean shallow slab dip angles are lower by only 4.7–8.1° for east to northeast-dipping slabs. It is thus concluded that overall, there is no observational basis to support the three predictions made by the westward drift model, and for some sub-predictions the observational basis is very weak at most. Alternative models, which incorporate and underline the importance of slab buoyancy-driven trench migration, slab width and overriding plate motion, are better candidates to explain the complexity of subduction zones, including the variety in trench-migration velocities, overriding plate deformation and slab dip angles.  相似文献   

3.
Petroleum and aqueous fluid inclusions from the Encantada–Buenavista fluorite mineralized zone in northern Mexico were analyzed by microthermometry, UV fluorescence, Raman Spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR) and Confocal Scanning Laser Microscopy (CSLM) to evaluate the geochemical evolution of the mineralizing fluids. Two-phase (petroleum or brine+vapor) and three-phase (petroleum+brine+vapor) inclusions are described. Aqueous and petroleum-rich inclusions commonly occur in the same plane. Vapor-decrepitated and stretched fluid inclusions are present. A low-salinity methane-saturated fluid and a high salinity-fluid with highly variable methane contents are recognized. H2S is not quantified but is always detected in close association with methane. Petroleum inclusions are of two types: a low methane petroleum fluid (20 mol%) with low Th (60 °C) and a petroleum fluid with a methane of content near 30 mol% and a Th of 90 °C.Pressure and temperature diagrams for the aqueous and petroleum inclusions show three main intersects that allow P–T–X reconstruction of fluid evolution at La Encantada–Buenavista. A CH4- and H2S-rich low-salinity brine was mixed with oil that migrated under hydrostatic conditions with a thermal gradient of 70 °C/km. The arrival and mixing of a high-salinity aqueous fluid produced overpressure to 300 bars. A return to hydrostatic conditions was accompanied by an increase in the thermal gradient.The brine related to the fluorite orebodies appears to have a genetic relationship with the brines reported from the Jurassic petroleum basins located west of the fluorite bodies and similarities with reported fluids from Mississippi Valley type deposits. It is interpreted that the fluorine-rich fluids migrated toward the platform margins during the mid-Tertiary (30 to 32 Ma) using extension zones related to Basin and Range tectonism. Mixing of two different brines was responsible for precipitation and mineralization. Heat from magmas, related to tectonic extension, caused decrepitation and changes in the shape of fluid inclusions near the contact zones.  相似文献   

4.
Paleomagnetic samples of Paleocene–Eocene red sandstones were collected at 36 sites from the Jiangdihe-4 and Zhaojiadian formations around the Yongren (26.1°N, 101.7°E) and Dayao areas (25.7°N, 101.3°E). These areas are located in the Chuxiong basin of the Chuan Dian Fragment, southwestern part of the Yangtze block. After stepwise thermal demagnetization, a high-temperature component with unblocking temperature of about 680 °C is isolated from 26 sites. The primary nature of this magnetization is ascertained through positive fold and reversal tests at 95% confidence level. The tilt-corrected mean paleomagnetic directions for the Yongren and Dayao areas are D=17.2°, I=26.6° with α95=5.8° and D=16.5°, I=31.1° with α95=4.8, respectively. Easterly deflected declinations from this study are consistent with those reported from other areas of the Chuxiong basin, indicating its wide presence in the Cretaceous–Eocene formations of the said basin. Comparison with declination values expected from the Cretaceous–Eocene APWP of Eurasia indicates that the magnitude of clockwise rotation systematically increases toward the southeast within the Chuxiong basin as well as in the Chuan Dian Fragment. This trend of the differential tectonic rotation in the Chuan Dian Fragment is consistent with curvature of the Xianshuihe–Xiojiang fault system. Deformation of the Chuxiong basin can fairly be associated with the formation of eastward bulge in the southern part of the Chuan Dian fragment. During southward displacement, the Chuan Dian Fragment was probably subjected to tectonic stresses as a result interaction with the Yangtze and Indochina blocks, which resulted into east–west extension and north–south shortening.  相似文献   

5.
The spinel–quartz-bearing Al–Fe granulites from Ihouhaouene (In Ouzzal, West Hoggar) have a migmatitic appearance with quartzo-feldspathic layers intercalated with restitic layers. These granulites are characterized by a hercynitic spinel–quartz assemblage typical of high grade terranes. The stability of the spinel–quartz assemblage is attributed to an elevation of temperature (from 800 to >1100 °C) at high pressures (10–11 kbar), followed by an isothermal decompression from 9 to 5 kbar, an evolution typical of the In Ouzzal clockwise P–T path. The Al–Fe granulites’ history can be subdivided into different successive crystallisation stages. During the first stage, the spinel–quartz assemblage formed, probably following a prograde event that also produced partial melting. During a second stage, the primary spinel–garnet–sillimanite–quartz paragenesis broke-down to give rise to the secondary assemblage. The metamorphic evolution and phase relations during this stage are shown in P–T–X pseudosections calculated for the simple FMASH system. These pseudosections show that the orthopyroxene–cordierite–spinel symplectite appeared during a high temperature decompression, as a product of destabilisation of garnet in sillimanite-free microdomains with high XMg values. At the same time, the spinel–quartz association broke-down into cordierite in Fe-rich microdomains. Average pressure and temperature estimates for the orthopyroxene–spinel–garnet–cordierite–quartz association are close to the thermal peak of metamorphism (1000 ± 116 °C at 6.3 ± 0.5 kbar). With decreasing temperatures garnet–sillimanite corona developed from the breakdown of the primary spinel–quartz assemblage in the Fe-rich microdomains, whereas cordierite–spinel formed at the expense of primary sillimanite and garnet in the Mg-rich microdomains.  相似文献   

6.
The recent tectonics of the Arctic Basin and northeastern Asia are considered as a result of interaction between three lithospheric plates: North-America, Eurasia and Spitsbergen. Seismic zones (coinciding in the Norway-Greenland basin with the Kolbeinsey, Mohns and Knipovich ridges, and in the Arctic Ocean with the Gakkel Ridge) clearly mark the boundaries between them. In southernmost Svalbard (Spitsbergen), the secondary seismic belt deviates from the major seismic zone. This belt continues into the seismic zone of the Franz Josef Land and then merges into the seismic zone of the Gakkel Ridge at 70°–90°E. The smaller Spitsbergen plate is located between the major seismic zone and its secondary branch.Within northeastern Asia, earthquake epicenters with magnitude over 4.5 are concentrated within a 300-km wide belt crossing the Eurasian continent over a distance of 3000 km from the Lena estuary to the Komandorskye Islands. A single seismic belt crosses the northern sections of the Verkhoyansky Ridge and runs along the Chersky Ridge to the Kolymo-Okhotsk Divide.To compute the poles of relative rotation of the Eurasian, North-American and Spitsbergen plates we use 23 new determinations of focal-mechanism solutions for earthquakes, and 38 azimuths of slip vectors obtained by matching of symmetric mountain pairs on both sides of the Knipovich and Gakkel ridges; we also use 14 azimuths of strike-slip faults within the Chersky Ridge determined by satellite images. The following parameters of plate displacement were obtained: Eurasia/North America: 62.2°N, 140.2°E (from the Knipovich Ridge section south of the triple junction); 61.9°N, 143.1°E (from fault strikes in the Chersky Ridge); 60.42°N, 141.56°C (from the Knipovich section and from fault strikes in the Chersky Ridge); 59.48°N, 140.83°E, α = 1.89 · 10−7 deg/year (from the Knipovich section, from fault strikes in the Chersky Ridge and from the Gakkel Ridge section east of the triple junction). The rate was calculated by fitting the 2′ magnetic lineations within the Gakkel Ridge).North-America/Spitsbergen: 70.96°N, 121.18°E, α = −2.7 · 10−7 deg/year from the Knipovich Ridge section north of the triple junction, from earthquakes in the Spitsbergen fracture zone and from the Gakkel Ridge section west of the triple junction). Eurasia/Spitsbergen: 70.7°N, 25.49°E, α = −0.99 · 10−7 deg/year (from closure of vector triangles).  相似文献   

7.
The Middle and Late Triassic Santa Maria Basin, exposed in southernmost Brazil, and Waterberg Basin, in Namibia, are herein interpreted as part of en échelon small basins in southern West Gondwana. The main structures are the Waterberg-Omaruru Fault which can be connected to a NW-strike anastomosed fault zone in Brazil. Based on field structural and stratigraphic analysis two populations of NW-strike fractures, named A-type and B-type, are recognized. A-type fractures (Az = 280°-290°) occur in the Sanga do Cabral Supersequence, underlying units of Santa Maria Basin, as extension of the Waterberg-Omaruru Fault during the Early Triassic. B-type fractures (Az = 295°-345°) are observed in all studied stratigraphic units, from the Triassic Sanga do Cabral Supersequence to the Early Cretaceous Botucatu/Serra Geral formations. Based on the structural analysis we propose that NNE-SSW extension reactivated structures of the Damara Belt, Namibia, with a propagation towards Rio Grande do Sul State forming an anastomosing normal fault system and related-rift basin by Early-Middle Triassic time. The A-type fractures were preferentially active by this phase and the B-type ones are interpreted as secondary link segments within the anastomosing system. During the Gondwana break-up and South Atlantic opening (rift to proto-oceanic phase, Aptian) the B-type fractures were reactivated as normal faults by N50°E-S50°W extension.  相似文献   

8.
We report for the first time the evidence for prograde high-pressure (HP) metamorphism preceding a peak ultrahigh-temperature (UHT) event in the northernmost part of the Madurai Block in southern India. Mg–Al-rich Grt–Ged rocks from Komateri in Karur district contain poikiloblastic garnet with numerous multi-phase inclusions. Although most of the inclusion assemblages are composed of gedrite, quartz, and secondary biotite, rare staurolite + sapphirine and spinel + quartz are also present. The XMg (=Mg/[Fe+Mg]) of staurolite (0.45–0.49) is almost consistent with that reported previously from Namakkal district in the Palghat–Cauvery Shear Zone system (XMg = 0.51–0.52), north of the Madurai Block. The HP event was followed by peak UHT metamorphism at T = 880–1040 °C and P = 9.8–12.5 kbar as indicated by thermobarometric computations in the Grt–Ged rock and associated mafic granulite. Symplectic intergrowth of spinel (XMg = 0.50–0.59, ZnO < 1.7 wt.%) and quartz, a diagnostic indicator of UHT metamorphism, probably formed by decompression at UHT conditions. The rocks subsequently underwent retrograde metamorphism at T = 720–760 °C and P = 4.2–5.1 kbar. The P–T conditions and clockwise exhumation trajectory of the Komateri rocks, comparable to similar features recorded from the Palghat–Cauvery Shear Zone system, suggest that the Madurai Block and the Palghat–Cauvery Shear Zone system underwent similar HP and UHT metamorphic history probably related to the continent–continent collision during the final stage of amalgamation of Gondwana supercontinent.  相似文献   

9.
Precambrian granulite-facies rocks occur in significant proportion in the East Antarctic Precambrian shield. Ages of metamorphic and deformational events range from 2500 m.y. to about 500 m.y., but some rocks are much older, notably the approximately 3500 m.y. ages for crust formation in Enderby Land. Mineral assemblages over most of the area are typical of the hornblende granulite facies, and sparse temperature pressure estimates indicate metamorphism at 700–800°C and 5–8 kbar at reduced water pressures. A terrane of exceptional interest is the Napier complex of Enderby Land, where sapphirine-quartz ± garnet, sillimanite-orthopyroxene, osumilite, and inverted pigeonite are associated with pyroxene-granulite-facies rocks. Metamorphic conditions are estimated to have reached 900°–980°C, 7–9 kbar, and pH2O < 0.5 kbar. Metamorphism in the Napier complex, and possibly in other parts of East Antarctica, may be associated with large loss of fluid rather than massive influx of CO2.  相似文献   

10.
Strain measurements and tectonics of New Zealand   总被引：1，自引：0，他引：1  
Measurements of shear strain from triangulation data have been made at 30 locations in New Zealand. The standard error of measurement in terms of strain rate is about ±1 · 10−7 y−1 and values of up to 7 · 10−7 y−1 are observed. Together with 22 fault-plane solutions for crustal earthquakes the measurements indicate broad-scale patterns of deformation. Between the Hikurangi and Flordland active margins is a 100-km-wide belt, the axial tectonic belt, with shear strain rate averaging 5 ± 1 · 10−7y−1 and an azimuth of the principal axis of compression of 114 ± 8°. The rate of movement (45 mm y−1) and direction (085°) between the Pacific and Indian plates from the Minster et al. pole can be accounted for by the measured strain in the axial tectonic belt through simple shear parallel to, and compression normal to, the belt. The similarity in the rates determined from triangulation data averaged over 20–100 years and from plate movement averaged over 5 m.y. indicates plate movement to be uniform in time. West of the axial tectonic belt in Nelson and Fiordland are two zones in which movement is highly oblique to plate movement, and can be explained by slip line deformation analogous to the deformation of Asia. The azimuth of the principal axis of compression in the Taupo rift and East Cape region is NE—SW, perpendicular to its direction in the axial tectonic belt, suggesting extension in the rift and East Cape region normal to the subduction zone.  相似文献   

11.
The metamorphic evolution of a key sector of the western Mediterranean internal Alpine orogenic belt (southern Calabrian Peloritani Orogen) is identified and described by means of P–T pseudosections calculated for selected metapelite specimens, showing evidence of multi-stage metamorphism.Attention focused on the two lowermost basement nappes of the Aspromonte Massif (southern Calabria), which were differently affected by poly-orogenic multi-stage evolution. After a complete Variscan orogenic cycle, the upper unit (Aspromonte Peloritani Unit) was involved in a late-Alpine shearing event. In contrast, the several underlying metapelite slices, here grouped together as Lower Metapelite Group, show exclusive evidence of a complete Alpine orogenic cycle.In order to obtain reliable P–T constraints, an integrated approach was employed, based on: a) garnet isopleth thermobarometry; and b) theoretical predictions of the P–T stability fields of representative equilibrium assemblages. This approach, which takes into account the role of the local equilibrium volumes in controlling textural developments, yielded reliable information about P–T conditions from early to peak metamorphic stages, as well as estimates of the retrograde trajectory in the pseudosection P–T space.According to inferred detailed P–T paths, the evolution of the Aspromonte Peloritani Unit is characterised by a multi-stage Variscan cycle, subdivided into an early crustal thickening stage with P–T conditions ranging from 0.56 ± 0.05 GPa at 570 ± 10 °C to 0.63–0.93 GPa at 650–710 °C (peak conditions) and evolving to a later crustal thinning episode in lower P–T conditions (0.25 GPa at 540 °C), as documented by the retrograde trajectory.Conversely, the prograde evolution of the rocks of the Lower Metapelite Group shows evidence of a HP-LT early Alpine multi-stage cycle, with P–T evolving from 0.75–0.90 GPa at 510–530 °C towards peak conditions, with pressure increasing northwards from 1.12 ± 0.02 GPa to 1.24 ± 0.02 GPa, and temperatures of 540–570 °C.A late-Alpine mylonitic overprint affected the rocks of both the Aspromonte Peloritani Unit and the Lower Metapelite Group. This overprint was characterised by an initial retrograde decompression trajectory (0.75 ± 0.05 GPa at 570–600 °C), followed by a joint cooling history, ranging from 0.38 ± 0.14 at temperature from 450 to 520 °C.These inferred results were then used: a) to interpret the Lower Metapelite Group as a single crystalline basement unit exclusively affected by a complete Alpine orogenic cycle, according to the very similar features of P–T paths, comparable petrography and analogous structural characteristics; b) as a tool for more reliable correlations between the Aspromonte Massif, the other Calabrian terranes and the north African Orogenic Complexes. They may therefore consider a contribution to the geodynamic modelling of the western Mediterranean.  相似文献   

12.
Ferrous granulites in the area of Tidjénouine (Central Hoggar) exhibit a remarkable mineralogical composition characterized by the association orthoferrossilite–fayalite–quartz. These granulites are metamorphosed mafic igneous rocks showing the juxtaposition of different metamorphic parageneses. Peak paragenesis with garnet–clinopyroxene–amphibole–plagioclase–quartz reach to assemblage with orthopyroxene–plagioclase2. Secondary orthopyroxene reacted with garnet to produce symplectites with fayalite + plagioclase + quartz. The latest stage corresponds to an orthopyroxene–fayalite–quartz–plagioclase assemblage. The metamorphic history of the ferrous granulites is inferred by combining the study of phase relations with the construction of a petrogenetic grid and pseudosection in the CFMASH and CFAS systems using the Thermocalc program of [J. Metamorph. Geol. 6 (1988) 173]. The evolution of paragenetic minerals indicates a metamorphic P–T path through the following conditions: 7.1 ± 1 kbar at 880 °C, 4.9 ± 1.6 kbar at 750 °C and 3–4 kbar at 700 °C, which is consistent with a clockwise P–T path recorded throughout the area.  相似文献   

13.
The Middle Jurassic Fourth of July Batholith and cross-cutting mafic dikes have been studied geochronologically, geobarometrically and paleomagnetically to estimate subsequent tectonic motion of the Cache Creek Terrane (CCT) in the northern Canadian Cordillera. 40Ar/39Ar hornblende ages from a granodiorite phase are similar to U–Pb zircon ages and indicate rapid cooling of the batholith upon intrusion, suggesting that the magnetization age is coincident with the 173-Ma crystallization age. Argon ages of biotite from the granodiorite and two mafic dikes have similar ages of 165 Ma, which dates cooling through 280 °C.Aluminum-in-hornblende geobarometry indicates differential uplift of the batholith across a north–south fault zone along Atlin Lake with >6 km more uplift on its eastern side. Also, the eastern side has been tilted downward to the south–southwest by 9°.Combined paleomagnetic data from 20 granitoid and 11 mafic dike sites yield an in situ paleopole at 55°W, 63°N (dp=5°, dm=5°) and a tilt-corrected paleopole at 81°W, 55°N (dp=5°, dm=6°). Compared to the 173-Ma reference pole for the North American craton, the tilt-corrected pole suggests a significant southward translation of 16.1±3.7° and a significant clockwise rotation of 107±7°. The translation estimate is similar to the Jurassic Teslin Crossing pluton in the Stikine Terrane, however, the rotation estimate is very different. This could indicate that the Cache Creek Terrane was at a similar latitude of the Stikine Terrane, but the two were not yet amalgamated.  相似文献   

14.
P. Mandal  S. Horton   《Tectonophysics》2007,429(1-2):61-78
The HYPODD relocation of 1172 aftershocks, recorded on 8–17 three-component digital seismographs, delineate a distinct south dipping E–W trending aftershock zone extending up to 35 km depth, which involves a crustal volume of 40 km × 60 km × 35 km. The relocated focal depths delineate the presence of three fault segments and variation in the brittle–ductile transition depths amongst the individual faults as the earthquake foci in the both western and eastern ends are confined up to 28 km depth whilst in the central aftershock zone they are limited up to 35 km depth. The FPFIT focal mechanism solutions of 444 aftershocks (using 8–12 first motions) suggest that the focal mechanisms ranged between pure reverse and pure strike slip except some pure dip slip solutions. Stress inversion performed using the P and T axes of the selected focal mechanisms reveals an N181°E oriented maximum principal stress with a very shallow dip (= 14°). The stress inversions of different depth bins of the P and T axes of selected aftershocks suggest a heterogeneous stress regime at 0–30 km depth range with a dominant consistent N–S orientation of the P-axes over the aftershock zone, which could be attributed to the existence of varied nature and orientation of fractures and faults as revealed by the relocated aftershocks.  相似文献   

15.
The calcite cement in the Lower Ordovician Majiagou Formation in the Ordos basin in northern China can be subdivided into three groups based on preliminary results of oxygen and carbon isotopes and fluid inclusion microthermometry. Group 1 has low oxygen isotopes (− 14‰ to − 18‰), low Th values (92–103 °C), and low salinities (1.7–4.9 wt.% NaCl equivalent) and is interpreted to have precipitated during early burial from porewater influenced by meteoric water. Group 2 has much higher oxygen isotope values (− 5‰ to − 8‰), which, coupled with the higher Th values (136–151 °C), suggest that the calcite was precipitated from fluids that were significantly enriched in 18O, possibly resulting from fluid–rock reaction during burial. Group 3 occurring along fractures is characterized by high salinities (21–28 wt.% NaCl equivalent) and is interpreted to have been precipitated from locally preserved residual evaporitic brines. The occurrence of primary hydrocarbon inclusions and its low carbon isotopes (− 11‰ to − 15‰) suggest that precipitation of group 3 calcite took place in the presence of hydrocarbons.  相似文献   

16.
The Mascot–Jefferson City (M-JC) Mississippi Valley-type (MVT) deposits are in the Valley and Ridge province of the Appalachian orogen in East Tennessee. They have been a major source of zinc for the USA but their age is uncertain and thus their genesis controversial. About 10 specimens from each of 37 sites have been analysed paleomagnetically using alternating field and thermal step demagnetisation methods and saturation isothermal remanence methods. The sites sample limestones, dolostones, breccia clasts and sphalerite–dolomite MVT mineralisation from mines in the Lower Ordovician Kingsport and Mascot formations of the Knox Group. The characteristic remanent magnetisation (ChRM) is carried by magnetite in the limestones, by both magnetite and pyrrhotite in the dolostones and by pyrrhotite preferentially to magnetite in the mineralisation. Mineralized sites have a more intense ChRM than non-mineralised, indicating that the mineralising and magnetisation event are coeval. Paleomagnetic breccia tests on clasts at the three sites are negative, indicating that their ChRM is post-depositional remagnetisation, and a paleomagnetic fold test is negative, indicating that the ChRM is a remagnetisation, and a post-dates peak Alleghanian deformation. The unit mean ChRM direction for the: (a) limestones gives a paleopole at 129°E, 12°N (dp=18°, dm=26°, N=3), indicating diagenesis formed a secondary chemical remanent magnetisation during the Late Ordovician–Early Silurian; (b) dolomitic limestones and dolostone host rocks gives a paleopole at 125.3°E, 31.9°N (dp=5.3°, dm=9.4°, N=7), recording regional dolomitisation at 334±14 Ma (1σ); and (c) MVT mineralisation gives a paleopole at 128.7°E, 34.0°N (dp=2.4°, dm=4.4°, N=25), showing that it acquired its primary chemical remanence at 316±8 Ma (1σ). The mineralisation is interpreted to have formed from hydrothermal fluid flow, either gravity or tectonically driven, after peak Alleghanian deformation in eastern Tennessee with regional dolomitisation of the host rocks occurring as part of a continuum during the 20 Ma prior to and during peak deformation.  相似文献   

17.
A palaeomagnetic study has been carried out in the Tethyan Himalaya (TH; the northern margin of Greater India). Twenty-six palaeomagnetic sites have been sampled in Triassic low-grade metasediments of western Dolpo. Two remanent components have been identified. A pyrrhotite component, characterized by unblocking temperatures of 270–335 °C, yields an in situ mean direction of D=191.7°, I=−30.9° (k=29.5, α95=5.7°, N=23 sites). The component fails the fold test at the 99% confidence level (kin situ/kbed=6.9) and is therefore of postfolding origin. For reason of the low metamorphic grade, this pyrrhotite magnetization is believed to be of thermo-chemical origin. Geochronological data and inclination matching indicate an acquisition age around 35 Ma. The second remanence component has higher unblocking temperatures (>400 °C and up to 500–580 °C range) and resides in magnetite. A positive fold test and comparison with expected Triassic palaeomagnetic directions suggest a primary origin.The postfolding character of the pyrrhotite component, and its interpreted age of remanence acquisition, implies that the main Himalayan folding is older than 35 Ma in the western Dolpo area. This study also suggests that the second metamorphic event (Neo-Himalayan) was more significant in the Dolpo area than the first (Eo-Himalayan) one.A clockwise rotation of 10–15° is inferred from the pyrrhotite component, which is compatible with oroclinal bending and/or rotational underthrusting models. This rotation is also supported by the magnetite component, indicating that no rotation of the Tethyan Himalaya relative to India took place before 35 Ma.  相似文献   

18.
We have studied the paleomagnetism of the middle Cretaceous Iritono granite of the Abukuma massif in northeast Japan together with 40Ar–39Ar dating. Paleomagnetic samples were collected from ten sites of the Iritono granite (102 Ma 40Ar–39Ar age) and two sites of its associated gabbroic dikes. The samples were carefully subjected to alternating field and thermal demagnetizations and to rock magnetic analyses. Most of natural remanent magnetizations show mixtures of two components: (1) H component, high coercivity (Bc > 50–90 mT) or high blocking temperature (Tb > 350–560 °C) component and (2) L component, relatively low Bc or low Tb component. H component was obtained from all the 12 sites to give a mean direction of shallow inclination and northwesterly declination (I = 29.9°, D = 311.0°, α95 = 2.7°, N = 12). This direction is different from the geocentric axial dipole field at the present latitude (I = 56.5°) and the typical direction of the Cenozoic remagnetization in northeast Japan. Since rock magnetic properties indicate that the H component of the Iritono granite is carried mainly by magnetite inclusions in plagioclase, this component probably retains a primary one. Thus the shallow inclination indicates that the Abukuma massif was located at a low latitude (16.1 ± 1.6°N) about 100 Ma and then drifted northward by about 20° in latitude. The northwesterly deflection is attributed mostly to the counterclockwise rotation of northeast Japan due to Miocene opening of the Japan Sea. According to this model, the low-pressure and high-temperature (low-P/high-T) metamorphism of the Abukuma massif, which has been well known as a typical location, would have not occurred in the present location. On the other hand, the L component is carried mainly by pyrrhotite and its mean direction shows a moderate inclination and a northwesterly declination (I = 42.8°, D = 311.5°, α95 = 3.3°, N = 9). Since this direction is intermediate between the H component and early Cenozoic remagnetization in northeast Japan, some thermal event would have occurred at lower temperature than pyrrhotite Curie point ( 320 °C) during the middle Cretaceous to early Cenozoic time to have resulted in partial remagnetization.  相似文献   

19.
We retrieved samples of peridotite from a dredge haul (KH92-1-D2) collected during Cruise KH92-1 undertaken by the research vessel (R/V) Hakuho in 1992 at the landward trench slope of the southern Mariana Trench (11°41.16′N, 143°29.62′E; depth 6594–7431 m), which is the deepest ocean in the world. Ten of 30 retrieved samples possessed both a foliation and lineation, as assessed from 46 thin sections of various orientations and observations of hand samples. The samples showed marked variation in microstructure, ranging from coarse (> 5 mm) equigranular and intensely elongated textures to finer (< 1 mm) porphyroclastic and fine-grained equigranular textures. Olivine fabrics also varied among the different samples, with (010)[100] and (010)[001] patterns (termed A- and B-type, respectively) observed in samples with coarse textures and no clear patterns observed in samples with fine textures. Even though the peridotite samples were retrieved from a single dredge site, some contain primary tectonic microstructures and some contain secondary microstructures. Recent bathymetric and topographic analyses indicate that the lithosphere in this region is as thin as 20 km. Such a thin lithosphere may have been intensely deformed, even perhaps in the ductile regime, during fore-arc extension; consequently, the observed variations in microstructure within the peridotite samples probably reflect the complex tectonic evolution of the southern Mariana region.  相似文献   

20.
Mineralogical, fluid inclusion and geochemical studies were made on two intra-granitic gold deposits (Grovelas and Penedono), together with a deposit linked to sub-vertical structures in silicified metasediments at Três-Minas, and several intra-metamorphic occurrences at Vila Pouca de Aguiar. They all possess similar mineral assemblages, deformational state, fluid flow characteristics, ore fluid composition and have comparable P–T conditions. Three successive crystallisation stages are recorded during the formation of gold-bearing structures independent of their location or host rocks (granites or metasediments). They are:Stage 1 — the development of milky quartz veins that formed primarily after the emplacement of peraluminous two-mica granites (315–310 Ma) at P–T conditions reflecting high temperature and low pressure. They are similar to those from pluton induced metamorphism (P=300–350 MPa and T=500–550°C). No clear evidence was found for gold deposition during this stage.Stage 2 — during orogenic uplift and repeated tectonic reactivation a clear quartz was deposited in the early milky quartz veins (Stage 1) at P–T conditions between 100 and 300 MPa and 300 and 450°C. Local sulphide deposition (arsenopyrite II and pyrite II) occurred in clear quartz, but was never massive. The fluids percolating within the granite were mainly aqueous-carbonic and reflect equilibrium with the metamorphic host rocks. They are very similar to those found in metamorphic environments. No evidence for the involvement of magmatic fluids was found.Stage 3 — intense microfissuring of the earlier vein infillings occurred, associated with the main episode of gold deposition. The P–T conditions were <100 MPa and <300°C based on aqueous fluid inclusions. Native gold and electrum crystallised together with sulphides (galena, chalcopyrite and bismuthinite), native Bi and sulphosalts (Pb–Bi–Ag dominated). The fractures frequently contain chlorite (± sericite) especially where they crosscut earlier sulphides (arsenopyrite).These processes and fluid types are similar in both the granites and metamorphic host rocks. Therefore, the gold ores appear to be the result of successive periods of fluid circulation, in this case related to the uplift of the Variscan basement in response to high heat flow and the intrusion of granites. Without exception, these fluids have been re-equilibrated with the metamorphic rocks. However magmatic fluids are absent; the granites thus act passively as heat engines for fluid circulation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号