共查询到20条相似文献，搜索用时 46 毫秒
1.
大别造山带构造超压形成的碰撞力学机理 总被引：3，自引：0，他引：3
提出了大别山构造超压形成的点碰撞模型，简要分析了大陆碰撞带构造运动引起的粘性介质中粘性应力和平均应力随岩石物性的变化规律。探讨了构造压力对超高压的贡献及对成岩深度的重要意义。研究表明：构造运动引起的岩石圈中的附加压力可能与静岩压力有相同的数量级，大陆造山带两陆块不规则边界的碰撞会引起局部应力集中，产生较大的构造压力，岩石介质的流变学分析表明，在相同外力作用下，岩石圈上部的高粘度性质决定了其在构造活动期间增温效果显著，但增压效果有限；而粘性较低的岩石圈下部则增压效果明显，为此，在下地壳与上地幔之间的低粘度带内有可能发生超高压变质作用。 相似文献
2.
HU Baoqun LU Guxian WANG Fangzhang SUN Zhanxue LIU Chengdong BAI Lihong 《大地构造与成矿学(英文版)》2005,29(2):128-138
1 Introduction The pressure, a scalar quantity, is defined as P = F/S (F is force, S is the area for F) which can be widely used for both solid and fluid. The formula P = g ρh (g-gravitation acceleration,ρ-density, h-depth) is only used for even density static solid and fluid. The delivery of pressure in the fluid follows the law of Pascal, and the average pressure of uneven density fluid can be calculated with the formula of P = g ρh. The temperature influence on pressure is notHU Ba… 相似文献
3.
The paper discusses questions related to the generation of increasing crustal horizontal compressive stresses compared to the idea of the standard gravitational state at the elastic stage or even from the prevalence of horizontal compression over vertical stress equal to the lithostatic pressure. We consider a variant of superfluous horizontal compression related to internal lithospheric processes occurrin in the crust of orogens, shields, and plates. The vertical ascending movements caused by these motions at the sole of the crust or the lithosphere pertain to these and the concomitant exogenic processes giving rise to denudation and, in particular, to erosion of the surfaces of forming rises. The residual stresses of the gravitational stressed state at the upper crust of the Kola Peninsula have been estimated for the first time. These calculations are based on the volume of sediments that have been deposited in Arctic seas beginning from the Mesozoic. The data speak to the possible level of residual horizontal compressive stresses up to 90 MPa in near-surface crustal units. This estimate is consistent with the results of in situ measurements that have been carried out at the Mining Institute of the Kola Science Center, Russian Academy of Sciences (RAS), for over 40 years. It is possible to forecast the horizontal stress gradient based on depth using our concept on the genesis of horizontal overpressure, and this forecasting is important for studying the formation of endogenic deposits. 相似文献
4.
5.
We conduct a theoretical analysis of steady‐state heat transfer problems through mid‐crustal vertical cracks with upward throughflow in hydrothermal systems. In particular, we derive analytical solutions for both the far field and near field of the system. In order to investigate the contribution of the forced advection to the total temperature of the system, two concepts, namely the critical Peclet number and the critical permeability of the system, have been presented and discussed in this paper. The analytical solution for the far field of the system indicates that if the pore‐fluid pressure gradient in the crust is lithostatic, the critical permeability of the system can be used to determine whether or not the contribution of the forced advection to the total temperature of the system is negligible. Otherwise, the critical Peclet number should be used. For a crust of moderate thickness, the critical permeability is of the order of magnitude of 10?20 m2, under which heat conduction is the overwhelming mechanism to transfer heat energy, even though the pore‐fluid pressure gradient in the crust is lithostatic. Furthermore, the lower bound analytical solution for the near field of the system demonstrates that the permeable vertical cracks in the middle crust can efficiently transfer heat energy from the lower crust to the upper crust of the Earth. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
6.
Analyses of bathymetry, gravity and seismic reflection data of the diffusive plate boundary in the central Indian Ocean reveal
a new kind of deformed structure besides the well-reported structures of long-wavelength anticlinal basement rises and high-angle
reverse faults. The structure (basement trough) has a length of about 150 km and deepens by up to 1 km from its regional trend
(northward dipping). The basement trough includes a rise at its center with a height of about 1.5km. The rise is about 10
km wide with rounded upper surface and bounded by vertical faults. A broad freeair gravity low of about 20 mGal and a local
high of 8 mGal in its center are associated with the identified basement trough and rise structure respectively. Seismic results
reveal that the horizontal crustal compression prevailing in the diffusive plate boundary might have formed the basement trough
possibly in early Pliocene time. Differential loading stresses have been generated from unequal crust/sediment thickness on
lower crustal and upper mantle rocks. A thin semi-ductile serpentinite layer existing near the base of the crust that is interpreted
to have been formed at mid-ocean ridge and become part of the lithosphere, may have responded to the downward loading stresses
generated by the sediments and crustal rocks to inject the serpentinites into the overlying strata to form a classic diapiric
structure. 相似文献
7.
盆地形成及成矿与地幔流体间的成因联系 总被引：11，自引：0，他引：11
文中共讨论以下5个问题:(1)盆地起源于幔壳溃变和膨隆,后者是地幔流体(超临界态(>375℃)HACONS流体,简称幔汁)上涌、渗入、交代、富化、致熔的产物。地幔流体造成油气盆地深部的高热流、异常超高压、伊利水云母化、硅化和地层有机碳的加氢成油作用。(2)盆地成矿可分两大阶段,先是沉积时的同生成矿;地层沉积后还有众多的后生成矿。两者组成“盆地矿套”(杜乐天,2002)。成矿无论同生还是后生,其分布均受断裂控制,都和地幔流体活动有关。(3)黑色页岩的实质是碳-硅-泥三元岩系,和热液成矿中的碳酸盐-硅质-泥质蚀变三元完全相当。此类岩系中总是有几十种亲壳亲幔亲气元素的特殊富集。奇异的是,石油、油页岩、沥青及砂岩型铀矿彼此有完全类似的继承性元素特殊富集。此等元素群不可能都是来自盆地之外蚀源区岩体的风化。研究证明,相当多的元素是地幔流体携带上来的。(4)盆地地层中广泛发育由地幔流体衍生的热液作用。(5)盆地实质上是气盆,全盆地排气。许多气田是地幔流体排气形成的。沙漠(原地型)和天然气田的共生很值得注意,两者皆源于地球强烈排气,导致地下和大气增温,过度蒸发,不易降雨,长期干旱而形成沙漠。 相似文献
8.
A.P. Tarkov 《Tectonophysics》1980,65(1-2)
Consideration of the Voronezh Crystalline Massif shows that three-layered seismic models and velocity profiles with a characteristic distribution of layer velocities and their gradients in each layer, reflect a crystalline crust and uppermost mantle structure formed through regional metamorphism and magmatism processes.Velocity and seismic parameter vertical gradients from the lithosphere profile are several times higher than those for homogeneous compression of minerals and rocks.For the identified layers the contribution of different factors for each seismic parameter gradient value is estimated. Anomalously high rates of increase with depth for Vp, Vs and ø are shown to be caused by the combined effects of structure-phase transformations and substance composition variations in lithospheric complex mineral parageneses. 相似文献
9.
The relatively low elevation and thick crust in the Altiplano, in comparison to the higher elevation, but thinner crust in the Puna plateau, together with geophysical data, suggests that isostatic equillibrium is achieved by cooler and denser lithospheric mantle in the Altiplano. Excess density in the Altiplano mantle could create differential horizontal stress in the order of 25 MPa between both lithospheric columns. Numerical models accounting for pressure and temperature-dependent rheology show that such stress can induce horizontal ductile flow in the lower crust, from the Puna towards the Altiplano. With a minimum viscosity of 1019 Pa s, this flow reaches 1 cm/year, displacing more than 50 km of material within 5 Ma. If the lower crust viscosity is smaller, the amount of orogeny-parallel lower crustal flow can be even greater. Such a mechanism of channel flow may explain that different amounts of crustal material have been accommodated by shortening in the Altiplano and in the Puna. Because of the strength of the elastic-brittle upper crust, this channel flow does not necessitate large amounts of surface deformation (except vertical uplift), making it difficult to detect from the geology. 相似文献
10.
A rheological model of the Indian shield has been constructed using the thermal structure derived from available surface heat
flow and heat generation data and the flow properties of characteristic minerals and rocks like quartz, diabase and olivine
which respectively represent the upper crust, lower crust and upper mantle. Lateral variations in the thicknesses of the brittle
and ductile crust and of the brittle upper mantle have thus been obtained for different tectonic environments. Implications
of these results to interpretation of the seismic structure of the Indian shield have been pointed out. 相似文献
11.
A possible mechanism of the ascent of material within the Earth’s crust and mantle is the mechanism of hydroextrusion, i.e.,
the effect of squeezing of material under excess pressure. The major factors that predetermine the high plasticity of the
material and its ability to produce hydroextrusions are high lithostatic pressures and temperatures. The phenomenon of hydroextrusion
can be most clearly illustrated by the example of the origin of salt diapirs. The driving force of hydroextrusions of material
in the crust and mantle is excess pressure, which can result from lateral differences between the densities of rocks (as is
the case during the development of salt diapirs) and phase transitions associated with a volume increase. When the material
of the upper mantle undergoes partial melting with the derivation of basaltic melts at depths of 60–100 km, excess pressures
reach 80 MPa, whereas the plasticity limit of 20% melted rocks is no higher than 5 MPa. As a result, the partially molten
material is forced from the melting region toward zones with lower lithostatic pressures. A local temperature increase in
the transitional zones in the Earth’s mantle at positive dP/dT values of the phase transitions also gives rise to excess pressures, whose values can range from 100 to 800 MPa at a 0.5–3.0%
volume change and which can be the driving force during the origin of mantle plumes.
Original Russian Text ? V.N. Anfilogov, Yu.V. Khachai, 2006, published in Geokhimiya, 2006, No. 8, pp. 873–878. 相似文献
12.
We present the results of tectonophysical reconstruction of natural stresses of the Earth's crust in the Altai–Sayan mountain region using cataclastic analysis of fault slips and seismic data on the focal mechanisms of earthquakes. This method allows one to obtain the parameters of the total stress tensor by invoking additional data: generalized experimental data on the brittle fracture of rocks, seismic data on the released stress of strong earthquakes, and data on the topography and density of rocks. Results of the tectonophysical reconstruction of stresses showed significant inhomogeneity of the stress state, which is manifested not only in the variation of the strike and dip of the principal axes of the stress tensor, determining changes in the geodynamic regime of the Earth's crust, but also in the close location of the regions of high and low isotropic tectonic pressure in relation to the lithostatic pressure. The variance of the ratio of tectonic pressure to lithostatic pressure is in the range of 0.59–1.31, with an average value for the region close to unity. This paper discusses internal or external mechanisms capable of generating the stress field obtained by the tectonophysical reconstruction. 相似文献
13.
TANG Huafeng GUO Tianchan WU Keqiang LIU Zilin XU Jianyong LU Baoliang WANG Pujun 《《地质学报》英文版》2022,96(1):337-347
Research on the distribution of mantle CO2should involve comprehensive analysis from CO2source to accumulation.The crust-mantle pathway system is the key controlling factor of the distribution of mantle CO2,but has received little attention.The pathway system and controlling factors of CO2distribution in the Bohai Sea are analyzed using data on fault styles and information on the mantle and lithosphere.The relation between volcanic rocks and the distribution of mantle CO2is reassessed using age data for CO2accumulations.The distribution of mantle CO2is controlled by uplift of the asthenosphere and upper mantle,magma conduits in the mantle and fault systems in the crust.Uplifted regions of the asthenosphere are accumulation areas for CO2.The area with uplift of the Moho exhibits accumulation of mantle CO2at depth.CO2was mainly derived from vertical migration through the upper mantle and lower crust.The fault style in the upper crust controls the distance of horizontal migration and the locations of CO2concentrations.The distribution of mantle CO2and volcanic rocks are not the same,but both probably followed the same pathways sometimes.Mantle CO2in the Bohai Sea is concentrated in the Bozhong sag and the surrounding area,particularly in a trap that formed before 5.1 Ma and is connected to crustal faults(the Bozhang faults)and lithospheric faults(the Tanlu faults). 相似文献
14.
《地学前缘(英文版)》2022,13(5):101428
Until the middle of the 20th century, the continental crust was considered to be dominantly granitic. This hypothesis was revised after the Second World War when several new studies led to the realization that the continental crust is dominantly made of metamorphic rocks. Magmatic rocks were emplaced at peak metamorphic conditions in domains, which can be defined by geophysical discontinuities. Low to medium-grade metamorphic rocks constitute the upper crust, granitic migmatites and intrusive granites occur in the middle crust, and the lower crust, situated between the Conrad and Moho discontinuities, comprises charnockites and granulites. The continental crust acquired its final structure during metamorphic episodes associated with mantle upwelling, which mostly occurred in supercontinents prior to their disruption, during which the base of the crust experienced ultrahigh temperatures (>1000 °C, ultrahigh temperature granulite-facies metamorphism). Heat is provided by underplating of mantle-derived mafic magmas, as well as by a massive influx of low H2O activity mantle fluids, i.e. high-density CO2 and high-salinity brines. These fluids are initially stored in ultrahigh temperature domains, and subsequently infiltrate the lower crust, where they generate anhydrous granulite mineral assemblages. The brines can reach upper crustal levels, possibly even the surface, along major shear zones, where granitoids are generated through brine streaming in addition to those formed by dehydration melting in upper crustal levels. 相似文献
15.
变形岩石的磁组构参数（K1,K2,K3,P,T,F,L,E等）可以用来定量地分析和了解构造变形的性状。内蒙古兵图—大泉子一带韧性剪切带发育,并伴有金矿的产出。文章通过定向采取韧性剪切带内的岩石样品,测定岩石磁组构特征,认为该断裂面两侧形成一对顺时针方向力偶,促使兵图—大泉子一带的韧性剪切带呈右行走滑运动。韧性剪切带由于剪切生热和上地幔物质的上涌,在中下地壳发生高温高压变质作用,将热烘烤作用中形成的富含CO2等偏碱性流体带入中上地壳,在剪切带的脆性构造中因温压下降和沸腾作用,使金矿物与多金属硫化物沿糜棱面理及显微裂隙分布,形成韧性剪切带型金矿。 相似文献
16.
The existence of peridotitic komatiites in the Archaean suggests that the Archaean mantle was significantly hotter than the modern mantle. This evidence is contradicted by estimates of Archaean continental geothermal gradients, based on the pressure and temperature recorded in metamorphic rocks, which suggest that there is no marked difference between Archaean and modern continental geothermal gradients.Numerical modelling shows that small changes in the mantle temperature can have an important influence on convection. If the average temperature of the upper mantle is increased by 200°C, convection within the mantle becomes chaotic and an upper mantle partial melt zone encircles the globe. The crust formed during this period will be komatiitic in composition but will be unstable and will be mixed back into the mantle by subduction. Later, when the mantle temperature falls to 100°C above its present level, the upper mantle partial melt zone contracts away from subduction areas.It is suggested that the first primitive felsic magmas were generated at subduction zones. The appearance of these magmas at ～3.8 Ga permitted the formation of buoyant continents and eventually led to crustal thickening. As a consequence of this thickening the proto-continents, consisting of a bimodal suite of basalts and sodic granodiorites, contained two types of latent energy: (1) radioactive energy held in elements such as Th, K and U; and (2) potential energy resulting from the elevation of the continents above sea level. The potential energy of the continents led to sedimentation. The increase in the rate of sedimentation during the Archaean resulted from increased crustal buoyancy. At the same time heat released by radioactive elements in the deep crust built up under the insulating blanket of the upper crust. This caused a major metamorphic, metasomatic and crustal melting event which produced the potassic granites of the late Archaean. Once the radioactive elements had been removed from the lower crust, that region of the continent become tectonically stable. The Proterozoic shelf sediments were deposited at the margins of these stable cratons.Convection models of the Archaean mantle show hot diapirs rising from the boundary layer above the core—mantle interface. We suggest that these diapirs began to melt at a depth of ～ 450 km, giving rise to komatiitic magmas. This model requires the average temperature of the Archaean upper mantle to be ～ 100°C above that of the modern mantle. The similarity between Archaean and modern continental geothermal gradients can be explained if Archaean continents formed above subduction zones.Raising the temperature of the Archaean mantle by 100°C (1) halves the thickness of the oceanic lithosphere, (2) increases the oceanic geothermal gradient at the mid-point of a convection cell, (3) decreases the viscosity of the mantle by at least an order of magnitude. The combination of these effects produces a marked decrease in the strength of the Archaean lithosphere and mantle. Thus the form of Archaean tectonics can be expected to have been very different from modern tectonics. 相似文献
17.
This paper provides a synopsis of the state of stress in the upper parts of the earth's crust based uponin situ rock stress determinations. Despite the large scatter of the data, two dominant trends can be detected in the variations of average horizontal stress with depth in various geological environments. Basement rocks in ancient shields and deformed rocks in fold belts usually show horizontal stresses larger than the theoretical overburden pressure. Sedimentary cover rocks and fissured massive rocks show horizontal stresses smaller than the overburden pressure. The ratio of the maximum to the minimum horizontal stress exhibits a clear stress anisotropy in most cases. Directions of maximum horizontal compression are fairly consistent in areas where sufficient measurements are available (North America and Fennoscandia), although in many instances they do not conform to any simple predicted stress pattern. Many factors complicate the interpretation ofin situ stress determinations. There is no simple relationship between the stress trajectories and the free surface. Topographic features and erosional processes may cause horizontal stress concentrations. Remanent stresses of great age can be superimposed on current tectonic stresses, while sometimes current stresses no longer coincide with the stress systems that caused observable faulting and folding. Observation of remanent stresses in ancient rocks shows that rocks in the upper crust have finite strength even under geological time intervals. From the viewpoint of global tectonics,in situ stress determinations ought to be used with great caution, and in conjunction with focal mechanism solutions of earthquakes. Although the state of stress is everywhere compressive, the fact that undeformed sedimentary cover rocks often show no excess horizontal stress would seem to indicate that no active global horizontal compression is required. Horizontal stresses larger than the overburden pressure in regions of intense palaeodeformation may be due to remanent stress effects and to the influence of the local structure. It is premature to advance any general statement on tectogenesis on the basis ofin situ stress determinations. More measurements, and a quantitative evaluation of the factors affecting them, are required before further progress can be made. 相似文献
18.
Modes of thickening of analogue weak lithospheres 总被引：4，自引：2，他引：4
Several compressional contexts, such as those involving juvenile or thickened crust, are expected to be associated with rather hot lithospheres whose mechanical behaviour remains poorly documented. In this paper, we present a series of analogue models dedicated to compression of lithospheres characterized by a thin upper brittle crust overlying a weak ductile crust and a ductile sub-Moho mantle. The models show that (1) deformation is controlled by the ductile layers that undergo distributed thickening, (2) thrust systems are limited to the upper brittle crust, (3) thrusting induces burial and stacking of upper crust pop-downs. The overall deformation patterns can be basically interpreted in terms of pop-down thrusting of the brittle crust and pure-shear type ductile flow of crust and mantle. Moreover, the models show that the sinking of supracrustal units does not require inverse density profiles but can be simply driven by compression. Model deformation patterns are consistent with those shared by many ancient belts, including not only Archaean granite–greenstone belts, but also more generally Paleoproterozoic ones. They provide also insights on deformation modes that may characterize modern thickened and abnormally hot domains like High Plateaus. 相似文献
19.
This is a critical comment on the model of basin formation by eclogitization of mafic crust suggested by E. Artyushkov. The eclogitization model bears uncertainties in average parameters (thickness, density, pressure) of lithospheric mantle, crust, and sediments, which may bias the estimates of subsidence magnitude. Main pitfalls, however, lie in high-pressure petrology: The lithostatic pressure is insufficient for eclogite to form in the lower crust beneath deep basins. It is shown that linear extrapolation of laboratory data on the gabbro-to-eclogite transition onto the field of relatively low pressures and temperatures in the lithosphere is incorrect. The hypothesized role of hot mantle fluids in the gabbro-eclogite transformation appears doubtful in terms of both petrology and kinetics of metamorphic reactions. Eclogite volumes in none of well known eclogitic sites agree with those required for eclogitization-driven subsidence. Artyushkov’s criticism of the extension basin formation model is not quite just. There are recent models of a two-layer lithosphere that imply a possibility of brittle and ductile deformation at different crust rheologies. The models we refer to predict most of extension to occur in mantle lithosphere rather than in the crust, this extension being able to produce deep continental basins. 相似文献
20.
L. SIEBENALLER M. ‐C. BOIRON O. VANDERHAEGHE C. HIBSCH M. W. JESSELL A. ‐S. ANDRE‐MAYER C. FRANCE‐LANORD A. PHOTIADES 《Journal of Metamorphic Geology》2013,31(3):313-338
Fluid inclusions trapped in quartz veins hosted by a leucogneiss from the southern part of the Naxos Metamorphic Core Complex (Attic‐Cycladic‐Massif, Greece) were studied to determine the evolution of the fluid record of metamorphic rocks during their exhumation across the ductile/brittle transition. Three sets of quartz veins (V‐M2, V‐BD & V‐B) are distinguished. The V‐M2 and V‐BD are totally or, respectively, partially transposed into the foliation of the leucogneiss. They formed by hydrofracturing alternating with ductile deformation accommodated by crystal‐plastic deformation. The V‐B is discordant to the foliation and formed by fracturing during exhumation without subsequent ductile transposition. Fluids trapped during crystal–plastic deformation comprise two very distinct fluid types, namely a CO2‐rich fluid and a high‐salinity brine, that are interpreted to represent immiscible fluids generated from metamorphic reactions and the crystallization of magmas respectively. They were initially trapped at ～625 °C and 400 MPa and then remobilized during subsequent ductile deformation resulting in various degrees of mixing of the two end‐members with later trapping conditions of ～350 °C and 140 MPa. In contrast, brittle microcracks contain aqueous fluids trapped at 250 °C and 80 MPa. All veins display a similar δ13C pointing to carbon that was trapped at depth and then preserved in the fluid inclusions throughout the exhumation history. In contrast, the δD signature is marked by a drastic difference between (i) V‐M2 and V‐BD veins that are dominated by carbonic, aqueous‐carbonic and high‐salinity fluids of metamorphic and magmatic origin characterized by δD between ?56‰ and ?66‰, and (ii) V‐B veins that are dominated by aqueous fluids of meteoric origin characterized by δD between ?40‰ and ?46‰. The retrograde P–T pathway implies that the brittle/ductile transition separates two structurally, chemically and thermally distinct fluid reservoirs, namely (i) the ductile crust into which fluids originating from crystallizing magmas and fluids in equilibrium with metamorphic rocks circulate through a geothermal gradient of 30 °C km?1 at lithostatic pressure, and (ii) the brittle upper crust through which meteoric fluids percolate through a high geothermal gradient of 55 °C km?1 at hydrostatic pressure. 相似文献