首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 375 毫秒
1.
Natural Ariake clays are characterized by high sensitivity. In this study, the mechanism and the factors controlling undrained shear strengths of both undisturbed and remolded Ariake clays are discussed. A series of unconfined compressive tests were performed on undisturbed samples of natural Ariake clays. The remolded undrained shear strength is predicted using a quantitative expression derived from extensive data of remolded undrained shear strength for a number of soils compiled from resources in the literature. The sensitivity of natural Ariake clays derived from the ratio of half of unconfined compressive strength for undisturbed samples to remolded undrained shear strength is found to be affected by both natural water content and normalized water content that is defined as the ratio of natural water content to liquid limit. The smaller the natural water content, the higher the sensitivity is at the same normalized water content. At the same natural water content, the larger the normalized water content, the higher the sensitivity is.  相似文献   

2.
ABSTRACT

Natural Ariake clays are characterized by high sensitivity. In this study, the mechanism and the factors controlling undrained shear strengths of both undisturbed and remolded Ariake clays are discussed. A series of unconfined compressive tests were performed on undisturbed samples of natural Ariake clays. The remolded undrained shear strength is predicted using a quantitative expression derived from extensive data of remolded undrained shear strength for a number of soils compiled from resources in the literature. The sensitivity of natural Ariake clays derived from the ratio of half of unconfined compressive strength for undisturbed samples to remolded undrained shear strength is found to be affected by both natural water content and normalized water content that is defined as the ratio of natural water content to liquid limit. The smaller the natural water content, the higher the sensitivity is at the same normalized water content. At the same natural water content, the larger the normalized water content, the higher the sensitivity is.  相似文献   

3.
Despite the sophisticated methods employed to obtain high quality samples, they are prone to disturbance, due to stress release, let apart, due to sampling tools and techniques adopted. Critical reappraisal of different methods suggest that any method of sample quality assessment involving strength and deformation parameters would enable easier implementation and correct other engineering parameters for estimated sample disturbance. In this technical paper, sample disturbance index, using merely the slopes of compression paths, (representing mechanical response), in the pre- and post-yield stress regimes under odeometric loading conditions is proposed. This method is based on single oedometer test results on samples of unknown degrees of disturbance during sampling and handling. The unique feature of this approach is that the ideal rigid plastic material behavior is taken as reference. This eliminates the need for any additional experimental data or any calculations from the relationships formulated with any set of assumptions.  相似文献   

4.
Despite the sophisticated methods employed to obtain high quality samples, they are prone to disturbance, due to stress release, let apart, due to sampling tools and techniques adopted. Critical reappraisal of different methods suggest that any method of sample quality assessment involving strength and deformation parameters would enable easier implementation and correct other engineering parameters for estimated sample disturbance. In this technical paper, sample disturbance index, using merely the slopes of compression paths, (representing mechanical response), in the pre- and post-yield stress regimes under odeometric loading conditions is proposed. This method is based on single oedometer test results on samples of unknown degrees of disturbance during sampling and handling. The unique feature of this approach is that the ideal rigid plastic material behavior is taken as reference. This eliminates the need for any additional experimental data or any calculations from the relationships formulated with any set of assumptions.  相似文献   

5.
Abstract

Evaluation of the strength of cement-treated clay with a broad range of mix ratios and curing periods was conducted using unconfined compression tests (UCTs). The influence of cement content, total water content, and curing period on the unconfined compressive strength of cemented clay are investigated. It is found that, at constant total water content, higher cement content results in higher unconfined compressive strength, while the total water content has an opposite effect. A power function can be used to correlate the unconfined compressive strength with the cement content or the total water content. For a fixed mix ratio, the unconfined compressive strength of cement-stabilized clay increases with the curing period, the effect of which can be characterized by a semi-log formula. Also, a strength-prediction model that considers both mix ratios and curing periods for cement-admixed marine clay is developed and validated; the model can capture the effect of clay type by considering the plastic index of untreated soils. It is also proved that the proposed framework for strength development is also applicable for other cement types.  相似文献   

6.
This study investigates the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged clays, and cement through both unconfined and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analyzed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing pressure. In the triaxial compression test, it is found that the compressive strength of LWS associated with EPS is independent on the effective confining pressure. When both EPS ratio is less than 2% and cement ratio is more than 2%, the compressive strength rapidly decreases after the ultimate value. This signifies that the compressive strength-strain behavior is quite similar to that of the cemented soil. The ground improved by LWS has the compressive strength of 200 kPa associated with the optimized EPS ratio of 3-4% and initial water content of 165-175%. The ultimate compressive strength under both triaxial and unconfined compression tests is almost constant for a cement ratio of up to 2%.  相似文献   

7.
This study investigates the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged clays, and cement through both unconfined and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analyzed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing pressure. In the triaxial compression test, it is found that the compressive strength of LWS associated with EPS is independent on the effective confining pressure. When both EPS ratio is less than 2% and cement ratio is more than 2%, the compressive strength rapidly decreases after the ultimate value. This signifies that the compressive strength-strain behavior is quite similar to that of the cemented soil. The ground improved by LWS has the compressive strength of 200 kPa associated with the optimized EPS ratio of 3–4% and initial water content of 165–175%. The ultimate compressive strength under both triaxial and unconfined compression tests is almost constant for a cement ratio of up to 2%.  相似文献   

8.
As indicated by the profile of overconsolidation ratio (OCR), the stress history of a soil deposit is one of the dominant factors that influence the engineering behavior of soils. A commonly used method to obtain the parameter is the laboratory oedometer test, which is of low accuracy and time consuming because of inevitable sample disturbance. These difficulties can be overcome by in situ pizeocone penetration test, which provides continuous measurement of cone resistance, sleeve friction, and pore water pressure induced during the penetration. Though many methods have been proposed to estimate the preconsolidation pressure and overconsolidation ratio of clay deposits, their validity still needs to be proved. In this study, existing empirical methods for interpreting stress history of clays through piezocone tests are briefly reviewed. It is shown that regional correlations are valid. Piezocone tests utilizing a Vertek-Hogentogler CPTU truck that have been completed at different sites in the Jiangsu province of China. Existing correlations are compared with these field test data. It is shown that the correlation based on normalized net tip resistance is pretty accurate for determining the overconsolidation ratio of Quaternary clay deposits.  相似文献   

9.
On Physical and Mechanical Behavior of Natural Marine Intermediate Deposits   总被引：4，自引：1，他引：4  
Coastal structures may be built on natural sedimentary intermediate grounds, which mainly consist of silty soils and fine sandy soils. In this study, extensive field and laboratory tests were performed on the nattwal marine intermediate deposits to demonstrate the difference in behavior between natural marine clayey soils and natural marine intermediate deposits. The natural intermediate deposits have almost the same miles of natural water content to liquid limit as those of the soft natural marine clays, but the former have much higher in-situ strength and sensitivity than the latter. The research results indicate that grain size distributions of soils affect significantly tip resistance obtained in field cone penetration tests. The mechanical parameters of natural marine intermediate deposits are also significantly affected by sample disturbance due to their high sensitivity and relatively large permeability. Unconfined compression shear tests largely underestimate the strength of natural marine intermediate soils. The triaxial consohdated compression shear tests with simulated insitu confined pressure give results much better than those of uncomfined compression shear tests.  相似文献   

10.
ABSTRACT

Biogrouting, which is a new method for soil improvement, was used in an attempt to cement a type of hydraulic fill fine sands (called black sands) in reclamation projects in Tianjin, China, to form a working layer for mechanical equipment. Several factors influencing biogrouting with regard to cementing solution, including injection frequency, reaction time, concentration, and flow rate, were controlled to prepare black sand columns. This paper reports on an investigation of bacterial fixation, calcium ion utilization, and calcium carbonate distributions of biogrouted sand specimens. At the end of the tests, the geotechnical performances of the sand specimens were determined. The results showed that the biogrouting method effectively solidified black sands, by increasing the unconfined compressive strength of a sand column to 1.91?MPa and reducing the permeability coefficient by three orders of magnitude. A relationship between the unconfined compressive strengths and calcium carbonate contents was put forward, in addition to a relationship between the permeability coefficients and the calcium carbonate contents. According to the experimental results, some reasonable suggestions regarding the application of biogrouting to the consolidation of hydraulic fill fine sands in reclamation projects were proposed.  相似文献   

11.
Large amounts of sediments are dredged annually from Chinese oceans. Dredged materials (DMs) possess poor geotechnical properties and are normally treated as waste. This paper presents the first large-scale engineering application of DM solidification treatment in China. The technique has been used to treat approximately 1.8?×?106?m3 of DM from Taihu Lake to produce fill soils. Portland cement was chosen as the solidification material, the amount of which is confirmed through indoor unconfined compressive strength (UCS) tests. Special solidification machines process DM at 120?m3/hours. Field-based DM solidification engineering began in September 2006. Curing specimens were examined over 28 days. Results show that both UCS and failure strain of solidified DM could meet fill soil requirements. Bearing capacity was also assessed with a cone penetrometer test. Samples were examined after 2 years (after project completion), and the mean UCS of the specimens was 237.2?kPa, which completely satisfied the engineering request. Wuxi Taihu City Science and Technology Industrial Park has now been established on top of the solidified DM storage yard. The successful engineering of such facilities results in economic and environmental benefits; thus, engineering applications of DM solidification treatment are widely promoted in China.  相似文献   

12.
Undrained shear strength is a fundamental parameter for estimating the stability of soft soils. This study explores the relationship between undrained shear strength, void ratio, and shear wave velocity for saturated and normally consolidated clay specimens. The undrained shear strength void ratio-shear wave velocity relationship was correlated to empirically determined parameters of selected marine clay specimens. To verify the proposed relationship between undrained shear strength and shear wave velocity, in situ flat dilatometer tests were used for determining the undrained shear strength, and downhole tests were used to assess the shear wave velocity on a natural soil deposit at various depths. The undrained shear strength estimated from the in situ shear wave velocities was compared to the undrained shear strength obtained in the field. The results show that the inferred undrained shear strength yield similar values and follow the same trends as the in situ undrained shear strength data. This method using shear wave velocity can help to nondestructively estimate the undrained shear strength of soft soils in the field and be used in both on-shore and off-shore geotechnical engineering projects.  相似文献   

13.
In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount of oil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions: fresh, brackish and saltwater environments (submerged in fresh water, alternation of exposed in air & submerged in sea water and submerged in sea water). The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.  相似文献   

14.
For the purpose of efficient utilization of sediments dredged from harbor, a new method was proposed in this study. Marine silt bricks were made by mixing sediments with cement and gypsum, placing it in a cubic mold with 240 mm in length, 115 mm in width, and 53 mm in height, and curing for certain days. To investigate the effects of cement and initial water content of soil on the mechanical behavior of marine silt bricks, unconfined compressive and flexural strength tests were carried out. Given the same curing time and cement content, the higher the initial water content, the lower the compressive and flexural strength. After 60 days of curing, the compressive strength of marine silt bricks with cement content = 20% and water content = LL (liquid limit) reached approximately 5 MPa. The flexural strength was relatively low. The flexural strength of marine silt bricks with 20% cement and water content = LL was around 1.5 MPa. The compressive and flexural strength decreased with the increase of water/cement ratio. As for the curing time, longer curing time had a positive impact on the compressive strength. The ratio of flexural to compressive strength varied slightly in the range of 0.4–0.5.  相似文献   

15.
In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount of oil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions: fresh, brackish and saltwater environments (submerged in fresh water, alternation of exposed in air & submerged in sea water and submerged in sea water). The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.  相似文献   

16.
选用巴斯德芽孢杆菌,对微生物诱导钙离子、镁离子以及铁离子形成碳酸盐固化松散珊瑚砂颗粒的效果进行对比研究。试验结果表明,在相同试验方法、相同注入次数的条件下,微生物诱导形成的碳酸钙和碳酸镁能将珊瑚砂松散颗粒固化成为整体,加入铁离子的试样因为反应过程的原因没有成功。通过渗透性、干密度变化、无侧限抗压强度及微观结构等方面进行对比分析,钙离子试样相对于镁离子试样,具有固化过程平稳、干密度增量大、强度高、微观颗粒包裹更好的优点。综合试验结果得出,钙离子是现阶段微生物固化珊瑚砂较为理想的金属离子。本试验首次探讨了金属离子种类对珊瑚砂微生物固化效果的影响,为微生物固化技术提供了一定理论基础,对该技术的进一步应用具有一定借鉴意义。  相似文献   

17.
Posidonia oceanica (PO) is the most plentiful seaweed of the Mediterranean Sea, which grows all along the coastal areas, forming widespread meadows. The leaf rejuvenation process of Posidonia oceanica typically occurs in fall when an increase in wave action causes the dead seaweeds to be transported and usually piled up along the coastal areas. This paper investigates the effect of PO ash stabilization on behaviour of an expansive clay. The ash was obtained by combustion of crushed PO pieces in a muffle furnace at 550°C. Atterberg limits, linear shrinkage, particle size distribution, one-dimensional swell, and unconfined compression tests have been carried out on natural soil as well as soil mixtures with 5% and 10% PO ash. There has been no significant improvement in the soil properties with 5% ash inclusion, whereas 10% ash has noticeably reduced the swell amount and increased the compressive strength. It is therefore concluded that there is a potential for the use of PO ash in geotechnical engineering applications.  相似文献   

18.
This paper focuses on the rate-dependent yield stress, undrained strength, and long-term undrained strength of clay. Various oedometer and triaxial tests were performed on Wenzhou marine clay. The uniqueness of rate-dependent and long-term yield stress and strength is discussed. A new anisotropic elastic viscoplastic model is proposed by adopting the concept of anisotropy and isotropy processes. The determination of model parameters is discussed, demonstrating how all model parameters can be determined in a straightforward way requiring the same basic tests as for the Modified Cam Clay model. Experimental verifications are carried out using the constant strain-rate and creep tests on the Wenzhou marine clay.  相似文献   

19.
ABSTRACT

Strength and stiffness properties of materials are widely studied and used in civil engineering practice. However, most studies are based on unconfined conditions, which are different from real status of soil. This study investigated the primary yielding and yield locus for cement-stabilized marine clay. In this study, two types of cement-stabilized soils were studied through isotropic compression, triaxial drained shearing, unconfined compression, and bender element testing. Specimens with 20–50% of cement content and 7–90 days of curing period were used for the tests. Stress–strain behavior and primary yielding were evaluated, followed by construction of the primary yield locus. The characteristics of the primary yield locus and its development with curing time then were studied. The results showed that the properties of the primary yield locus were dependent on the type of stabilized soil, but were independent of the cement content and curing period. Thus, the approach provides a way to estimate the primary yield stress and drained stress path before primary yielding for cement-stabilized soil under confined condition. An empirical function was used to fit the primary yield locus. The primary isotropic yield stress was correlated to unconfined compressive strength or maximum shear modulus. Three indirect methods were proposed to predict the primary yield stress for cement-stabilized marine clay. The results showed that the primary yield stress can be estimated with reasonable accuracy.  相似文献   

20.
Compacted sand–bentonite mixtures have been used as a good alternative hydraulic barrier material to compacted clays. This study presents the results of a laboratory investigation on the strength characteristics of cement-stabilized sand–bentonite (CSB) mixtures and the effects of adding small amounts of fibers and metakaolin to the mixture material for strength improvement. The strength characteristics of the mixture materials were examined using unconfined compressive strength (UCS) tests and splitting tensile strength (STS) tests, with emphasis on evaluating the effects of different proportions of bentonite, fibers, and metakaolin within the CSB mixtures with a constant value of cement content. The test results indicated that the maximum improvements in UCS and STS were all attained in the CSB mixture with 10% bentonite content, and the inclusion of fibers and metakaolin of 1% each within the same CSB mixture led to an increase in UCS of about 40 and 70%, respectively. The addition of fibers also increased the ductility of the mixture material and was more effective for the improvement of tensile strength compared to that of metakaolin. The contribution of metakaolin to early-age strength (i.e., 3 and 7 days) of CSB mixture was found to be small due to the relatively low cement content in the mixture.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号