共查询到19条相似文献，搜索用时 531 毫秒
1.
TANGGuoan ZHAOMudan LITianwen LIUYongmei ZHANGTing 《地理学报(英文版)》2003,13(4):387-394
Slope is one of the crucial terrain variables in spatial analysis and land use planning, especially in the Loess Plateau area of China which is suffering from serious soil erosion. DEM based slope extracting method has been widely accepted and applied in practice. However slope accuracy derived from this method usually does not match with its popularity. A quantitative simulation to slope data uncertainty is important not only theoretically but also necessarily to applications. This paper focuses on how resolution and terrain complexity impact on the accuracy of mean slope extracted from DEMs of different resolutions in the Loess Plateau of China. Six typical geomorphologic areas are selected as test areas, representing different terrain types from smooth to rough. Their DEMs are produced from digitizing contours of 1:10,000 scale topographic maps. Field survey results show that 5 m should be the most suitable grid size for representing slope in the Loess Plateau area. Comparative and math-simulation methodology was employed for data processing and analysis. A linear correlativity between mean slope and DEM resolution was found at all test areas, but their regression coefficients related closely with the terrain complexity of the test areas. If taking stream channel density to represent terrain complexity, mean slope error could be regressed against DEM resolution (X) and stream channel density (S) at 8 resolution levels and expressed as(0.0015S2 0.031S-0.0325)X-0.0045S2-0.155S 0.1625, with a R2 value of over 0.98. Practical tests also show an effective result of this model in applications. The new development methodology applied in this study should be helpful to similar researches in spatial data uncertainty investigation. 相似文献
2.
In mountainous area, spatial interpolation is the traditional method to calculate air temperature by use of observed temperature data. Due to lack of sufficient observation data in mountainous areas many precise interpolation methods could give only coarse result which could not meet the demand of precision agriculture and local climate exploration. Based on DEMs of 25 m resolution, a reversed model is constructed, with which temperature is simulated to the corresponding slope unit from the solar radiation. Taking Yaoxian county as a test area, and mean monthly temperature data as basic information sources, which are collected from 15 weather stations around Yaoxian county in Shaanxi province from the year of 1970 to 2000, a simulation for the solar radiation cell by cell is completed. By simulating solar radiation at each slope and flat cell unit, the terrain revised temperature model could be realized. A comparison between the simulated temperature and the radiation temperature from TM6 thermal infrared image shows that the terrain improved model gets a finer temperature distribution at local level. The accuracy of simulated temperature in mountainous area is higher than it is in flat area. 相似文献
3.
Mette V.ODGAARD Peder K.BФCHER Tommy DALGAARD Jesper E.MOESLUND Jens-Christian SVENNING 《地理学报(英文版)》2014,(1)
Complex topography buffers forests against deforestation in mountainous regions.However,it is unknown if terrain also shapes forest distribution in lowlands where human impacts are likely to be less constrained by terrain.In such regions,if important at all,topographic effects will depend on cultural-historical factors and thus be human-driven(anthropogenic) rather than natural,except in regions where the general climate or extreme soils limit the occurrence of forests.We used spatial regression modeling to assess the extent to which topographic factors explain forest distribution(presence-absence at a 48×48 m resolution) in a lowland agricultural region(Denmark,43,075 km2) at regional and landscape scales(whole study area and 10×10 km grid cells,respectively),how landscape-scale forest-topography relationships vary geographically,and which potential drivers(topographic heterogeneity,forest cover,clay content,coastal/inland location) determine this geographic heterogeneity.Given a moist temperate climate and non-extreme soils all landscapes in Denmark would naturally be largely forest covered,and any topographic relationships will be totally or primarily human-driven.At regional scale,topographic predictors explained only 5% of the distribution of forest.In contrast,the explanatory power of topography varied from 0%–61% at landscape scale,with clear geographic patterning.Explanatory power of topography at landscape scale was moderately dependent on the potential drivers,with topographic control being strongest in areas with high topographic heterogeneity and little forest cover.However,these conditioning effects were themselves geographically variable.Our findings show that topography by shaping human land-use can affect forest distribution even in flat,lowland regions,but especially via localized,geographically variable effects. 相似文献
4.
汶川地震灾后人口与居民点空间配置的适宜性评价 总被引：4，自引：1，他引：3
The suitability evaluation of population and settlements spatial layout in the mountainous areas is an important basis on which the scale of population and settlement after Wenchuan Earthquake is determined. Based on the statistical data of field research, this paper chooses 1264 towns in 51 counties as the scope of evaluation, selects eight indices in the evaluation index system which includes post-disaster population scale, population density, urbanization rate, the percentage of migrant workers, death rate by earthquake, the percentage of minorities, elevation-slope integrated terrain and comprehensive geological condition. Besides, this paper uses AHP supported by entropy technique and fuzzy membership function model to calculate the suitability evaluation index and then divides the disaster areas into five types: highly suitable area (area accounted for 11.03%), relatively highly suitable area (15.29%), moderately suitable area (29%), less suitable area (30.08%) and unsuitable area (14.6%). According to the result of suitability evaluation, this paper puts forward several suggestions for the reconstruction as follows: the urban system and the building of new countryside should be guided by the suitability evaluation subareas; post-earthquake reconstruction avoids zones near Longmenshan fracture and high-mountain gorge areas as far as possible; the scale of population and settlement should not exceed the capacity of resources and environment; population should be resettled as close as possible by considering adequately the heterogenicity and homogeneity of regional nationality culture characteristics; densely resettle the people at plains and hilly areas; encourage the migrant workers settle in the working place with their families voluntarily; and urban system reconstruction such as industry layout and important projects of lifeline should be guided by the spatial layout suitability evaluation. 相似文献
5.
On small-meso scale,the sea ice dynamic characteristics are quite different from that on large scale.To model the sea ice dynamics on small-meso scale,a new elastic-viscous-plastic(EVP) constitutive model and a hybrid Lagrangian-Eulerian (HLE) numerical method are developed based on continuum theory.While a modified discrete element model(DEM) is introduced to model the ice cover at discrete state.With the EVP constitutive model,the numerical simulation for ice ridging in an idealized rectangular basin is carried out and the results are comparable with the analytical solution of jam theory.Adopting the HLE numerical model,the sea ice dynamic process is simulated in a vortex wind field.The furthering application of DEM is discussed in details for modeling the discrete distribution of sea ice.With this study ,the mechanical and numerical models for sea ice dynamics can be improved with high precision and computational efficiency. 相似文献
6.
Accurately identifying the dominant factor of karst ecosystem services(ESs) is a prerequisite for the rocky desertification control. However, the explanatory power of environmental factors on the spatial distribution of ESs is affected by scaling, and the quantitative research on the scale effect still needs to be further strengthened. This study used the geographical detector to access the explanatory power of environmental factors on soil erosion and water yield at different spatial resolution... 相似文献
7.
TANG Guo-an~ Josef Strobl~ GONG Jian-ya~ ZHAO Mu-dan~ CHEN Zhen-jiang~ 《地理学报(英文版)》2001,11(2):209-216
1 IntroductionDigital elevation model (DEM) is digital representation of relief. It is one of the most important components in the database of GIS. At present, DEM is playing a key role in the field of survey and mapping, remote sensing and almost all the terrain related geographical analyses. DEM can be grouped into regular grids (raster) and triangulated irregular networks (TIN). Both have their advantages and disadvantages in application. It is generally believed that grid DEM will … 相似文献
8.
栅格化属性精度损失的评估方法及其尺度效应(英文) 总被引：2，自引：0，他引：2
Rasterization is a conversion process accompanied with information loss, which includes the loss of features’ shape, structure, position, attribute and so on. Two chief factors that affect estimating attribute accuracy loss in rasterization are grid cell size and evaluating method. That is, attribute accuracy loss in rasterization has a close relationship with grid cell size; besides, it is also influenced by evaluating methods. Therefore, it is significant to analyze these two influencing factors comprehensively. Taking land cover data of Sichuan at the scale of 1:250,000 in 2005 as a case, in view of data volume and its processing time of the study region, this study selects 16 spatial scales from 600 m to 30 km, uses rasterizing method based on the Rule of Maximum Area (RMA) in ArcGIS and two evaluating methods of attribute accuracy loss, which are Normal Analysis Method (NAM) and a new Method Based on Grid Cell (MBGC), respectively, and analyzes the scale effect of attribute (it is area here) accuracy loss at 16 different scales by these two evaluating methods comparatively. The results show that: (1) At the same scale, average area accuracy loss of the entire study region evaluated by MBGC is significantly larger than the one estimated using NAM. Moreover, this discrepancy between the two is obvious in the range of 1 km to 10 km. When the grid cell is larger than 10 km, average area accuracy losses calculated by the two evaluating methods are stable, even tended to parallel. (2) MBGC can not only estimate RMA rasterization attribute accuracy loss accurately, but can express the spatial distribution of the loss objectively. (3) The suitable scale domain for RMA rasterization of land cover data of Sichuan at the scale of 1:250,000 in 2005 is better equal to or less than 800 m, in which the data volume is favorable and the processing time is not too long, as well as the area accuracy loss is less than 2.5%. 相似文献
9.
Global solar radiation（GSR） is the most direct source and form of global energy, and calculation of its quantity is highly complex due to influences of local topography and terrain inter-shielding. Digital elevation model（DEM） data as a representation of the complex terrain and multiplicity condition produces a series of topographic factors（e.g. slope, aspect, etc.）. Based on 1 km resolution DEM data, meteorological observations and NOAA-AVHRR remote sensing data, a distributed model for the calculation of GSR over rugged terrain within the Yangtze River Basin has been developed. The overarching model permits calculation of astronomical solar radiation for rugged topography and comprises a distributed direct solar radiation model, a distributed diffuse radiation model and a distributed terrain reflectance radiation model. Using the developed model, a quantitative simulation of the GSR space distribution and visualization has been undertaken, with results subsequently analyzed with respect to locality and terrain. Analyses suggest that GSR magnitude is seasonally affected, while the degree of influence was found to increase in concurrence with increasing altitude. Moreover, GSR magnitude exhibited clear spatial variation with respect to the dominant local aspect; GSR values associated with the sunny southern slopes were significantly greater than those associated with shaded slopes. Error analysis indicates a mean absolute error of 12.983 MJm-2 and a mean relative error of 3.608%, while the results based on a site authentication procedure display an absolute error of 22.621 MJm-2 and a relative error of 4.626%. 相似文献
10.
Soil erosion is a major threat to sustainable agriculture. Evaluating regional erosion risk is increasingly needed by national and in-ternational environmental agencies. This study elaborates a model (using spatial principal component analysis [SPCA]) method for the evaluation of soil erosion risk in a representative area of dry-hot valley (Yuanmou County) at a scale of 1:100,000 using a spatial database and GIS. The model contains seven factors: elevation, slope, annual precipitation, land use, vegetation, soil, and population density. The evaluation results show that five grades of soil erosion risk: very low, low, medium, high, and very high. These are divided in the study area, and a soil erosion risk evaluation map is created. The model may be applicable to other areas of China because it utilizes spatial data that are generally available. 相似文献
11.
C. Qin A.‐X. Zhu T. Pei B. Li C. Zhou L. Yang 《International journal of geographical information science》2013,27(4):443-458
Most multiple‐flow‐direction algorithms (MFDs) use a flow‐partition coefficient (exponent) to determine the fractions draining to all downslope neighbours. The commonly used MFD often employs a fixed exponent over an entire watershed. The fixed coefficient strategy cannot effectively model the impact of local terrain conditions on the dispersion of local flow. This paper addresses this problem based on the idea that dispersion of local flow varies over space due to the spatial variation of local terrain conditions. Thus, the flow‐partition exponent of an MFD should also vary over space. We present an adaptive approach for determining the flow‐partition exponent based on local topographic attribute which controls local flow partitioning. In our approach, the influence of local terrain on flow partition is modelled by a flow‐partition function which is based on local maximum downslope gradient (we refer to this approach as MFD based on maximum downslope gradient, MFD‐md for short). With this new approach, a steep terrain which induces a convergent flow condition can be modelled using a large value for the flow‐partition exponent. Similarly, a gentle terrain can be modelled using a small value for the flow‐partition exponent. MFD‐md is quantitatively evaluated using four types of mathematical surfaces and their theoretical ‘true’ value of Specific Catchment Area (SCA). The Root Mean Square Error (RMSE) shows that the error of SCA computed by MFD‐md is lower than that of SCA computed by the widely used SFD and MFD algorithms. Application of the new approach using a real DEM of a watershed in Northeast China shows that the flow accumulation computed by MFD‐md is better adapted to terrain conditions based on visual judgement. 相似文献
12.
Qiming Zhou Xuejun Liu 《International journal of geographical information science》2013,27(8):819-842
This paper reports an investigation on the accuracy of grid-based routing algorithms used in hydrological models. A quantitative methodology has been developed for objective and data-independent assessment of errors generated from the algorithms that extract hydrological parameters from gridded DEM. The generic approach is to use artificial surfaces that can be described by a mathematical model, thus the ‘true’ output value can be pre-determined to avoid uncertainty caused by uncontrollable data errors. Four mathematical surfaces based on an ellipsoid (representing convex slopes), an inverse ellipsoid (representing concave slopes), saddle and plane were generated and the theoretical ‘true’ value of the Specific Catchment Area (SCA) at any given point on the surfaces could be computed using mathematical inference. Based on these models, tests were made on a number of algorithms for SCA computation. The actual output values from these algorithms on the convex, concave, saddle and plane surfaces were compared with the theoretical ‘true’ values, and the errors were then analysed statistically. The strengths and weaknesses of the selected algorithms are also discussed. 相似文献
13.
DEM流径算法的相似性分析 总被引：4，自引：0，他引：4
流径算法是分布式水文模型、土壤侵蚀模拟等研究中的关键技术环节,决定着汇水面积、地形指数等许多重要的地形、水文参数的计算。本文以黄土高原两个典型样区的不同分辨率DEM为研究对象,对常用的五种流径算法(D8、Rho8、Dinf、MFD和DEMON)通过相对差系数、累积频率图、XY散点分布图等进行了定量的对比分析。结果表明:算法的差异主要集中在坡面区域,汇流区域各类算法的差别较小;算法差异在不同DEM尺度下都有所体现,但高分辨率下的差异会更明显;在地形复杂区域,多流向算法要优于单流向算法。研究也进一步指出汇水面积、地形指数等水文参数对流径算法具有强烈的依赖性。 相似文献
14.
There is a growing interest in investigating the accuracy of digital elevation model (DEM). However people usually have an unbalanced view on DEM errors. They emphasize DEM sampling errors, but ignore the impact of DEM resolution and terrain roughness on the accuracy of terrain representation. This research puts forward the concept of DEM terrain representation error (Et) and then investigates the generation, factors, measurement and simulation of DEM terrain representation errors. A multi-resolution and multi-relief comparative approach is used as the major methodology in this research. The experiment reveals a quantitative relationship between the error and the variation of resolution and terrain roughness at a global level. Root mean square error (RMS Et) is regressed against surface profile curvature (V) and DEM resolution (R) at 10 resolution levels. It is found that the RMS Et may be expressed as RMS Et = (0.0061 × V+ 0.0052) × R - 0.022 × V + 0.2415. This result may be very useful in forecasting DEM accuracy, as well as in determining the DEM resolution related to the accuracy requirement of particular application. 相似文献
15.
16.
DEM采样间隔对地形描述精度的影响研究 总被引：1，自引：0，他引：1
数字高程模型(DEM)的精度包括采样点数据精度和地形描述精度两方面,前人对DEM精度的研究多集中在DEM采样点精度,而忽视了地形描述精度。该文提出基于窗口曲面拟合计算拟合曲面系列参数与"实际地形"曲面参数的标准差来衡量地形描述精度的方法,研究发现DEM地形描述精度随采样间隔的增大呈降低趋势;并利用坡度频率曲线和坡度累计频率曲线研究对DEM精度敏感的坡度因子与DEM采样间隔的关系,认为随DEM采样间隔增大,坡度衰减(变缓)的速率加快。 相似文献
17.
DEM地形信息量的准确度量是判定DEM数据应用适宜性与限制性关键。以黄土丘陵沟壑区DEM及其派生的坡度、坡向DTM为例进行实验,研究子集划分与分级数对DEM信息量估算精度的影响。结果表明,DEM地形信息量是实际地形信息和子集划分策略共同作用的结果,现有DEM信息量计算存在不确定性,DEM子集划分算法和分级数的选择直接影响DEM信息量的计算结果。文章借助最大熵定理的基本思路构建DEM地形信息量分级判定模型,可客观获得连续型栅格地形数据在信息量计算上最优分级,为有效估算DEM地形信息量提供科学依据。 相似文献
18.
JAY GAO 《International journal of geographical information science》2013,27(2):199-212
This paper examines the impact of DEM resolution on the accuracy of terrain representation and of the gradient determined. The DEMs of three terrain types with diverse complexities were constructed from digitizing contours and then kriging. The accuracy (RMSE) of the DEMs was regressed against contour density (D) and DEM resolution (S) at six resolution levels. It is found that RMSE may be expressed as (7.274 1.666S)D/1000 with an R value of 0.9659. The representation accuracy decreases moderately at an intermediate resolution, but sharply at coarse resolutions for all three terrain types. Resolution reduction profoundly affects the gradient determined from the DEM. While exerting little influence on mean gradient, resolution significantly affects the standard deviation of gradient, especially for a simple terrain. The results obtained in this study may be used to determine the DEM resolution that is appropriate to the accuracy requirements of a particular user. 相似文献
19.
山区地形开阔度的分布式模型 总被引：1，自引：0，他引：1
地形开阔度是影响山地辐射平衡及其分量的重要地形因子,是山区散射辐射、地形反射辐射等计算的重要参数。在复杂的地形条件下,地形开阔度的计算很难用数学公式描述。 利用数字高程模型（DEM）,全面考虑了坡地自身遮蔽和周围地形相互遮蔽的影响,提出了山区地形开阔度的分布式模型和算法。以1 km×1 km分辨率的DEM数据作为地形的综合反映,计算了起伏地形下中国地形开阔度的空间分布。同时,利用100 m和1 km两个分辨率的DEM数据,从不同DEM分辨率和不同地貌类型两个方面探讨了地形开阔度的空间尺度效应,阐明了区域地形开阔度随地形地貌和空间分辨率的变化规律。所提供的山地开阔度的数据可作为基础地理数据供相关研究应用。 相似文献