首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
The thickness and geothermal gradient of Archean continental crust are critical factors for understanding the geodynamic processes in Earth's early continental crust. Archean tonalite-trondhjemite-granodiorite (TTG) gneisses provide one of the potential indicators of paleo-crustal thickness and geothermal gradient because crust-derived TTG melts are generally thought to originate from partial melting of mafic rocks at the crustal root. In the Western Shandong Province (WSP) of the North China Craton (NCC), two episodes of Neoarchean TTG magmatism are recognized at ~2.70 Ga and ~2.55 Ga which were sourced from partial melting of juvenile crustal components. The ~2.70 Ga TTG gneisses show highly fractionated rare earth element (REE) patterns (average (La/Yb)N = 39), whereas the ~2.55 Ga TTG gneisses have relatively less fractionated REE patterns (average (La/Yb)N = 18). Petrogenetic evaluation suggest that the magmatic precursors of the TTG gneisses of both episodes originated from partial melting of juvenile crustal materials at different crustal depths with residual mineral phases of Grt, Cpx, Amp, Pl and Ilm. Together with the garnet proportion in the residue, the P–T pseudosections of equilibrium mineral assemblages, and the temperature calculated from Titanium-in-zircon thermometer, we estimate the Neoarchean crustal thicknesses as 44–51 km with geothermal gradients of 17 to 20 °C/km for the ~2.70 Ga TTG gneisses whereas the ~2.55 Ga TTG gneisses show lesser crustal thicknesses of 35–43 km with geothermal gradients of 19 to 26 °C/km, with an approximately 10 km difference in crustal thickness. Our estimates on the thicknesses and geothermal gradients of the Neoarchean crust are similar to those (~41 km, ~20 °C/km) of the modern average continental crust, indicating that a modern-style plate tectonic regime may have played an important role in the formation and evolution of the Neoarchean continental crust in the NCC.  相似文献   

2.
Simulation of carbon dioxide (CO2) at hourly/weekly intervals and fine vertical resolution at the continental or coastal sites is challenging because of coarse horizontal resolution of global transport models. Here the regional Weather Research and Forecasting (WRF) model coupled with atmospheric chemistry is adopted for simulating atmospheric CO2 (hereinafter WRF-CO2) in nonreactive chemical tracer mode. Model results at horizontal resolution of 27 × 27 km and 31 vertical levels are compared with hourly CO2 measurements from Tsukuba, Japan (36.05°N, 140.13 oE) at tower heights of 25 and 200 m for the entire year 2002. Using the wind rose analysis, we find that the fossil fuel emission signal from the megacity Tokyo dominates the diurnal, synoptic and seasonal variations observed at Tsukuba. Contribution of terrestrial biosphere fluxes is of secondary importance for CO2 concentration variability. The phase of synoptic scale variability in CO2 at both heights are remarkably well simulated the observed data (correlation coefficient >0.70) for the entire year. The simulations of monthly mean diurnal cycles are in better agreement with the measurements at lower height compared to that at the upper height. The modelled vertical CO2 gradients are generally greater than the observed vertical gradient. Sensitivity studies show that the simulation of observed vertical gradient can be improved by increasing the number of vertical levels from 31 in the model WRF to 37 (4 below 200 m) and using the Mellor–Yamada–Janjic planetary boundary scheme. These results have large implications for improving transport model simulation of CO2 over the continental sites.  相似文献   

3.
In rocks undergoing regional metamorphism, pressure and temperature gradients are not everywhere parallel, that is, isotherms are not everywhere parallel to isobars. Temperature gradients vary across the metamorphic terrain and decrease with increasing temperature. The angle between the temperature and the pressure gradients and the magnitude of the temperature gradient must be considered when isograd patterns are used to determine the distribution of pressure and temperature in the rocks when the isograds formed.In Val Mesolcina, southeastern Switzerland, post-tectonic isograds corresponding to mineral dehydration reactions dip steeply northward intersecting the more gently dipping isograd corresponding to the kyanite-andalusite transition. Distributions of pressure and temperature compatible with the isograd pattern have values of α (the angle between the pressure and the temperature gradients) of 50–70° and temperature gradients of 12–15 °C/km. These results indicate that at or near the peak of the Tertiary (Lepontine) phase of Alpine metamorphism isothermal surfaces in these rocks dipped steeply northward and isobaric surfaces were horizontal.The westward divergence of Lepontine mineral zone boundaries can be explained by decreasing values of α; that is, the flattening toward the west of a steep-sided thermal dome present in the eastern part of the Lepontine terrain at the time of metamorphism.  相似文献   

4.

Eastern Australian xenolith suites and lithospheric transition zones are re‐evaluated using new mineral analyses and thermo‐barometry. Some suites, including that defining the southeastern Australian geotherm, are not fully equilibrated. New pressure‐temperature estimates, based on experimental calibrations that allow for Cr and Ti in pyroxenes, differ from earlier results by up to 0.6 GPa and 250°C. The preferred Brey and Köhler 1990 thermo‐barometer indicates a shallower cooler garnet lherzolite transition under Mesozoic New South Wales (50 km depth at 980° C) than for Tertiary Tasmania (60 km depth at 1090°C).

Deviations between palaeogeotherms may reflect: (i) higher temperature gradients for Tasmania and New South Wales (by 100°C/0.1 GPa) related to abnormally hot mantle; (ii) higher temperature gradients linked to more voluminous magmatism, largely Cenozoic in age; and (iii) complex temperature perturbations linked to different levels of magmatic intrusion.

These deviations blur reconstructions of lithospheric assemblages, where temperature is determinable and pressure comes from an assumed geotherm. Potential errors in locating spinel lherzolite and crust‐mantle transition assemblages may reach 15 km in depth. The highest Tertiary geothermal gradients in Tasmania and northeastern New South Wales match those from regions of active lithospheric extension. The young southeastern Australian geotherm is decaying from a higher temperature equilibration, based on experimental work, and Mesozoic New South Wales geotherms trend towards the lower gradients of bounding cratons.  相似文献   

5.
A study of gneisses and schists from the Yenisey regional shear zone (Garevka complex) at the western margin of the Siberian Craton has provided important constraints on the tectonothermal events and geodynamic processes in the Yenisey Ridge during the Riphean. In situ U-Th-Pb geochronology of monazite and xenotime from different garnet growth zones and the calculation of P-T path derived from chemical zoning pattern in garnet were used to distinguish three metamorphic events with different ages, thermodynamic regimes and metamorphic field gradients. The first stage occurred as a result of the Grenville orogeny during late Meso-early Neoproterozoic (1050–850 Ma) and was marked by low-pressure zoned metamorphism at ～4.8–5.0 kbar and 565–580°C and a metamorphic field gradient with dT/dH = 20–30°C/km typical of orogenic belts. At the second stage, the rocks experienced Late Riphean (801–793 Ma) collision-related medium-pressure metamorphism at ～7.7–7.9 kbar and 630°C with dT/dH ≤ 10°C/km. The final stage evolved as a syn-exhumation retrograde metamorphism (785–776 Ma) at ～4.8–5.4 kbar and 500°C with dT/dH ≤ 12°C/km and recorded a relatively fast uplift of the rocks to upper crustal levels in shear zones. The range of exhumation rates at the post-collisional stage (500–700 m/Ma) correlates with the duration of exhumation and the results of thermophysical numerical modeling of metamorphic rocks within orogenic belts. The final stages of collisional orogeny are marked by the development of rift-related bimodal dyke swarms associated with Neoproterozoic extension (797 ± 11 and 7.91 ± 6 Ma; U-Pb SHRIMP II zircon data) along the western margin of the Siberian craton and the beginning of the breakup of Rodinia. Post-Grenville metamorphic episodes of regional evolution are correlated with the synchronous succession and similar style of the later tectono-metamorphic events within the Valhalla orogen along the Arctic margin of Rodinia and support the spatial proximity of Siberia and North Atlantic cratons at about 800 Ma, as indicated by the latest paleomagnetic reconstructions.  相似文献   

6.
Geothermal gradients and present day heat flow values were evaluated for about seventy one wells in parts of the eastern Niger delta, using reservoir and corrected bottom–hole temperatures data and other data collected from the wells. The results showed that the geothermal gradients in the shallow/continental sections in the Niger delta vary between 10 - 18° C/km onshore, increasing to about 24° C/km seawards, southwards and eastwards. In the deeper (marine/paralic) section, geothermal gradients vary between 18 - 45° C/km. Heat flow values computed using Petromod 1–D modeling software and calibrated against corrected BHT and reservoir temperatures suggests that heat flow variations in this part of the Niger delta range from 29–55 mW/m2 (0.69–1.31 HFU) with an average value of 42.5 mW/m2 (1.00 HFU). Heat flow variations in the eastern Niger delta correspond closely to variations in geothermal gradients. Geothermal gradients increase eastwards, northwards and seawards from the coastal swamp. Vertically, thermal gradients in the Niger delta show a continuous and non-linear relationship with depth, increasing with diminishing sand percentages. As sand percentages decrease eastwards and seawards, thermal gradient increases. Lower heat flow values (< 40 mW/m2) occur in the western and north central parts of the study area. Higher heat flow values (40 - 55 mW/m2) occur in the eastern and northwestern parts of the study area. A significant regional trend of eastward increase in heat flow is observed in the area. Other regional heat flow trends includes; an eastwards and westwards increase in heat flow from the central parts of the central swamp and an increase in heat flow from the western parts of the coastal swamp to the shallow offshore. Vertical and lateral variations in thermal gradients and heat flow values in parts of the eastern Niger delta are influenced by certain mechanisms and geological factors which include lithological variations, variations in basement heat flow, temporal changes in thermal gradients and heat flow, related to thicker sedmentary sequence, prior to erosion and evidenced by unconformities, fluid redistribution by migration of fluids and different scales of fluid migration in the sub-surface and overpressures.  相似文献   

7.
Since the pioneer wide-angle seismic profile along the Yadong–Gulu rift acquired in 1974 by the ex-Institute of Geophysics, Chinese Academy of Sciences (CAS), several research programs aimed to deep geophysics, performed thanks to the participation of Chinese national and international institutions, have been developed during last 35 years, including 23 wide-angle seismic profiles with total length of about 6000 km. These profiles are unevenly distributed, most of them in eastern Tibet and few profiles in western Tibet. In this paper, we make a summarized presentation of all these wide-angle seismic profiles and provide an overall view of the seismic velocity structure of the crust beneath the broad Tibetan plateau, which is the product of the continuous convergence and collision of the Indian and Eurasian plates since about 50 Ma ago. Different patterns of crustal thickness variation related to the tectonic blocks and along suture zones of the region are displayed. The crust thickness is confirmed to be about 70–75 km under southern Tibet, and 60–65 km under northern, northeastern and southeastern Tibet. The leading edge of the subducted lithosphere reaches the northern margin of the plateau and directly contacts with Tarim Basin. Westward of the 90°E boundary, the Indian crust is moving towards the northern edge of the plateau and collides with Tarim Basin at 80°E while reach the Bangong–Nujiang suture belt at 88°E; eastward of the 90°E boundary, the northern edge of the crust should be at 50–100 km south of Bangong–Nujiang suture. The results supply helpful constrains to understand the mechanism of the continent–continent collision and its consequences in the plateau and neighbouring areas.  相似文献   

8.
Following Appalachian orogenesis, metamorphic rocks in central Newfoundland were exhumed and reburied under Tournaisian strata. New zircon fission‐track (ZFT) ages of metamorphic rocks below the Tournaisian unconformity yield post‐depositionally reset ages of 212–235 Ma indicating regional fluid‐absent reheating to at least ≥220°C. Post‐Tournaisian sedimentary thicknesses in surrounding basins show that burial alone cannot explain such temperatures, thus requiring that palaeo‐geothermal gradients increased to ≥30–40°C/km before final late Triassic accelerated cooling. We attribute these elevated palaeo‐geothermal gradients to localized thermal blanketing by insulating sediments overlying radiogenic high‐heat‐producing granitoids. Late Triassic rifting and magmatism before break up of Pangaea likely also contributed to elevated heat flow, as well as uplift, triggering late Triassic accelerated cooling and exhumation. Thermochronological ages of 240–200 Ma are seen throughout Atlantic Canada, and record rifting and basaltic magmatism on the conjugate margins of the Central Atlantic Ocean preceding the onset of oceanic spreading at ~190 Ma.  相似文献   

9.
Two metamorphic complexes of the Yenisei Ridge with contrasting composition are analyzed to unravel their tectonothermal evolution and geodynamic processes during the Riphean geologic history of the area. The structural, mineralogical, petrological, geochemical and geochronological data are used to distinguish two stages of the evolution with different ages, thermodynamic regimes, and metamorphic field gradients. Reaction textures, chemical zoning in minerals, shapes of the P-T paths, and isotope dates provide convincing evidence for a poly metamorphic history of the region. The first stage is marked by the formation of the ~ 970 Ma low-pressure zoned And-Sil rocks (P = 3.9-5.1 kbar, T = 510–640 °C) of the Teya aureole and a high metamorphic field gradient with dT/dH = 25–35 °C/km typical of many orogenic belts. At the second stage, these rocks experienced Late Riphean (853–849 Ma) collisional medium-pressure metamorphism of the kyanite-sillimanite type (P = 5.7-7.2 kbar, T = 660–700 °C) and a low metamorphic field gradient with dT/dH < 12 °C/km. This metamorphic event was almost coeval with the Late Riphean (862 Ma) contact metamorphism in the vicinity of the granitic plutons, which was accompanied by a high metamorphic field gradient with dT/dH > 100 °C/km. At the first stage, the deepest blocks of the Garevka complex in the vicinity of the Yenisei regional shear zone underwent high-pressure amphibolite-facies metamorphism within a narrow range of P = 7.1-8.7 kbar and T = 580–630 °C, suggesting the burial of rocks to mid-crustal depths at a metamorphic field gradient with dT/dH ~ 20–25 °C/km. At the second stage, these rocks experienced the Late Riphean (900–850 Ma) syn-exhumation dynamometamorphism under epidote-amphibolte facies conditions (P = 3.9-4.9 kbar, T = 460–550 °C) and a low gradient with dT/dH < 10 °C/km accompanied by the formation of blastomylonitic complexes in shear zones. All these deformation and metamorphic events identified on the western margin of the Siberian craton are correlated with the final episodes of the Late Grenville orogeny and provide supporting evidence for a close spatial connection between Siberia and Laurentia during early Neoproterozoic time, which is in good agreement with recent paleomagnetic reconstuctions.  相似文献   

10.
《Engineering Geology》2002,63(1-2):39-47
To study the effect of microstructure and weathering on the strength anisotropy of rock, unconfined compressive strength (UCS) tests were carried out on three porous rhyolites having the same original lithology, but different weathering periods of 2600, 20,000 and 40,000 years. The rock is mainly composed of glassy groundmass, with flow structure. UCS tests were undertaken on a series of samples at 15° intervals, from right angles to the flow structure (β=90°) to parallel (β=0°), where β is the angle between the direction of the applied load and the direction of the flow structure. The test results show that UCS-values are maximum when β=0–30° and minimum when β=60–90°. This differs from previous reports for layered anisotropic rocks such as sandstone, sandy shale, schist etc., for which, UCS-values are maximum at β=0 or 90°. It is also found that UCS-values for β=60–90° reduce rapidly in the initial stage of weathering (the first 20,000 years), while for β=0–30°, the reduction rate increases after 20,000 years. This shows that the effect of weathering on strength anisotropy is not uniform, but depends on the weathering processes of the microstructures of the rock.  相似文献   

11.
The Kuril-Kamchatka seismofocal zone was thought to be a single plate approximately 90 km wide and dipping to a depth of 700 km at an angle of 40°–45°. This concept reflects primarily the physical differences (elastic wave velocities, density, temperature, etc.) between the seismofocal zone and the mantle hosting it. Detailed investigations show that the seismofocal zone proper is also heterogeneous with earthquake hypocenters variably concentrated and clustered within this zone, where both seismogenic and aseismic strata, as well as subvertical zones, can be identified. The latter are reflected in the structure and faults of the Earth’s crust and upper mantle.  相似文献   

12.
We herein present a new seismic refraction/wide-angle reflection profile that crosses the Songpan–Ganzi terrane, the Animaqing suture zone and the eastern Kunlun mountains (comprised of the South Kunlun and Middle Kunlun blocks separated by the Middle Kunlun fault). The profile is 380 km long and extends from Moba to Guide in eastern Tibet. The crustal thickness is about 62 km under the Songpan–Ganzi terrane, 62–64 km under the South Kunlun, and 60 km under the Middle Kunlun block. The Songpan–Ganzi flysch seems to be present up to a depth of 15 km south of the Animaqing suture zone, and up to a depth of 10 km in the Middle Kunlun block, with thicknesses elsewhere that depend on assumptions about the likely lithologies. The profile exhibits clear lateral variations both in the upper and lower crust, which are indicative of different crustal blocks juxtaposed by the Kunlun fault system. Whether or not the Songpan–Ganzi flysch was originally deposited on oceanic crust, at the longitude of our profile (100°E) it is now underlain by continental crust, and the presence of continental crust beneath the Songpan–Ganzi terrane and of a continental arc under the South Kunlun block suggest Paleozoic continent–continent arc collision in the eastern Kunlun Mountains. Comparison of crustal velocity columns from all wide-angle seismic profiles across the eastern Kunlun mountains indicates a remarkable west-to-east change in the Moho topography across the Kunlun fault system (15–20 km Moho step at 95°E, but only 2–5 km along our profile at 100°E). Lower-crustal thickness of the Kunlun terranes is rather uniform, about 35 km, from 80°–95°E, which suggests that similar thrust-thickening processes have played a role where the Qaidam Basin abuts the Kunlun fault, but thins to 20–25 km at 100°E, east of the Qaidam Basin. The increased crustal thickness from 93° to 98°E compared to that at 100°E may be due to the differences in the thickness of the crust of the two plates before their collision, and/or largely achieved by thickening of the lower crust, perhaps indicating a crustal flow mechanism operating more strongly in the western region.  相似文献   

13.
An updated analysis of geothermal data from the highland area of eastern Brazil has been carried out and the characteristics of regional variations in geothermal gradients and heat flow examined. The database employed includes results of geothermal measurements at 45 localities. The results indicate that the Salvador craton and the adjacent metamorphic fold belts northeastern parts of the study area are characterized by geothermal gradients in the range of 6–17°C/km. The estimated heat flow values fall in the range of 28–53 mW/m2, with low values in the cratonic area relative to the fold belts. On the other hand, the São Francisco craton and the intracratonic São Francisco sedimentary basin in the southwestern parts are characterized by relatively higher gradient values, in the range of 14–42°C/km, with the corresponding heat flow values falling in the range of 36–89 mW/m2. Maps of regional variations indicate that high heat flow anomaly in the São Francisco craton is limited to areas of sedimentary cover, to the west of the Espinhaço mountain belt. Crustal thermal models have been developed to examine the implications of the observed intracratonic variations in heat flow. The thermal models take into consideration variation of thermal conductivity with temperature as well as change of radiogenic heat generation with depth. Vertical distributions of seismic velocities were used in obtaining estimates of radiogenic heat production in crustal layers. Crustal temperatures are calculated based on a procedure that makes simultaneous use of the Kirchoff and Generalized Integral Transforms, providing thereby analytical solutions in 2D and 3D geometry. The results point to temperature variations of up to 300°C at the Moho depth, between the northern Salvador and southern São Francisco cratons. There are indications that differences in rheological properties, related to thermal field, are responsible for the contrasting styles of deformation patterns in the adjacent metamorphic fold belts.  相似文献   

14.
Low pressure-high temperature (LPHT) metamorphism, with geothermal gradients in the order of 50–100°C/km, is a common feature of the late evolution of collisional orogens. These abnormal thermal conditions may be the results of complex interactions between magmatism, metamorphism and deformation. The Agly massif, in the French Pyrenees, preserves the metamorphic footprints of the late Variscan thermal structure of an almost continuous section from the upper and middle continental crust. The upper crust is characterized by a very high geothermal gradient of ~55°C/km, evolving from greenschist to amphibolite facies, while the middle crust, exposed in a gneissic core, exhibits granulite facies conditions with a near isothermal geothermal gradient (<8°C/km) between 740 and 790°C. The abnormal and discontinuous crustal geothermal gradient, dated at c. 305 Ma on syn-granulitic monazite by LA-ICP-MS, is interpreted to be the result of magmatic intrusions at different structural levels in the crust: the Ansignan charnockite (c. 305 Ma) in the deepest part of the gneissic core, the Tournefort granodiorite (c. 308 Ma) at the interface between the gneissic core and the upper crust and the Saint-Arnac granite (c. 304 Ma) in the upper section of the massif. The heat input from these magmas combined with the thermal buffering effect of the biotite dehydration-melting reaction resulted in the near isothermal geothermal gradient in the gneissic core (melt-enhanced geotherm). The higher geothermal gradient (>50°C/km) in the upper crust is only due to conduction between the hot middle crust and the Earth's surface. The estimated maximum finite pressure range suggests that ~10 to 12 km of crust are exposed in the Agly massif while the present-day thickness does not exceed 5–6 km. This pressure/depth gap is consistent with the presence of several normal mylonitic shear zones that could have contributed to the subtraction of ~5 km of the rock pile. Monazite U–Th–Pb ages carried out on monazite overgrowths from a highly mylonitized sample suggest that this vertical thinning of the massif occurred at c. 296–300 Ma. This later Variscan extension might have slightly perturbed the 305 Ma geothermal gradient, resulting in an apparent higher conductive geothermal gradient in the upper crust. Although the Agly massif has been affected by Cretaceous extension and Eocene Alpine compression, we suggest that most of the present-day thickness of the column rock was acquired by the end of the Palaeozoic.  相似文献   

15.
A tomographic travel-time inversion has been applied to trace the subducted slab of the South China Sea (SCS) beneath the Manila Trench. The dataset, taken from the International Seismological Centre (1960–2008), is composed of 13,087 P-wave arrival times from 1401 regional earthquakes and 8834 from 1350 teleseismic events. The results image the different morphology of the subducted SCS slab as a high-velocity zone. The subducting angle of the slab varies along the trench: at 16° N and 16.5° N, the slab dips at a low angle (24° ~ 32°) for 20–250 km depth and at a moderate angle (50°) for ~250–400 km depth. At 17° N, the slab dips at a low angle (32°) to near 400 km depth, and at 17.5° N and 18° N the slabs are near vertical from 70 ~ 700 km depth, while at 20° N the high-velocity anomalies exhibit features from horizontal abruptly to near vertical, extending to 500 km depth. The dramatic steepening of the slab between 17° N and 17.5° N may indicate a slab tear, which is coincident with the axis of a fossil ridge within the SCS slab at around 17° N. In addition, low-velocity zones in the three profiles above 300 km depth may represent the formation of the slab window, induced by ridge subduction and slab tear, initiating upward mantle flow and resulting in the partial melting of the edge of the slab. The slab tear could explain the volcanic gap and geochemical difference between the extinct Miocene and Quaternary volcanoes in the Luzon Arc, the much higher heat flow around the fossil ridge, and the distribution of most of the adakites and the related porphyry Cu-Au deposits in the Luzon area. Based on the geometry and morphology of the subducted slab and certain assumptions, we calculate the initial time of ridge subduction, which implies that ridge subduction and slab tear possibly started at ~8 Ma.  相似文献   

16.
In plate-boundary scale ductile shear zones defined by microstructural weakening, shear heating may lead to a temperature increase over 5 m.y. of up to 80 °C just below the brittle ductile transition, up to 120 °C just below the Moho, and to thermal boundary zones tens of km wide on either side of the shear zone. Where rock strength is highest, shear zones are narrow (∼1 km), and thermal gradients within the shear zone itself are low, so there is no tendency for increased localization. Heating results in thermal weakening, but this is partly offset by grain growth related to the decrease in stress. In shear zones of the order of 10 km width, shear stress, strain rate, and hence heat generation are lower, and thermal gradients are insufficient to cause additional strain localization. Temperature increases in the mid-crust are of the order of 10 °C, insufficient to cause partial melting or an increase in metamorphic grade. In the upper mantle, shear zones may be 50 km or more wide, and the temperature increase is less than 20 °C in 5 m.y., but temperature differences between center and margin may enhance the strain rate at the center by up to 18%.  相似文献   

17.
Metamorphic rocks form a minor component of the NE Arabian margin in Oman and the United Arab Emirates (UAE). Conditions span almost the entire range of crustal metamorphism from very high-P/low-T eclogite and blueschist to high-P/moderate-T epidote- to upper-amphibolite and low-P/high-T granulite facies. The NE Arabian margin experienced at least six metamorphic events, each characterized by distinct peak metamorphic temperature, depth of burial, average thermal gradient and timing. Synthesis of the available metamorphic data defines five different tectonic settings that evolved during the middle Cretaceous: [1] The Saih Hatat window exposes former continental margin crust that was buried and metamorphosed in a SW-dipping subduction system. Lower-plate units in the window include relict oceanic crust with eclogite (M1–M2) parageneses that recrystallized at pressures of ~14–23 kbar under very low thermal gradients of 7–10 °C/km. Peak metamorphism occurred at ~110 Ma. Peak assemblages were overprinted by garnet–glaucophane-blueschist foliations (M3) at about ~104–94 Ma that formed at ~10–15 kbar and 10–15 °C/km during the first-stage of isothermal exhumation. [2] Metamorphic soles in the footwall of the Semail ophiolite experienced a two-stage history of deep burial and peak metamorphism at ~96–94 Ma, followed by retrogression during obduction onto the continental margin between ~93 and 84 Ma. Peak metamorphic garnet–clinopyroxene–hornblende–plagioclase assemblages (M4s), exposed at highest structural levels, formed at 743 ± 13 °C and 10.7 ± 0.4 kbar, indicating Barrovian thermal regimes of 20.0 ± 2.2 °C/km. Burial of seafloor sediments and oceanic crust to ~38 km depth, was attained within a short-lived, NE-dipping intra-oceanic subduction system. The relatively high average thermal gradient during the peak of metamorphism was the result of heating after subcretion onto the base of hanging-wall oceanic lithosphere. [3] The Bani Hamid terrane consists of seafloor cherts and calcareous turbidites, metamorphosed to low-P/high-T granulite condition at ~96–94 Ma. Diagnostic assemblages (M4b) such as orthopyroxene–cordierite–quartz–plagioclase and orthopyroxene–sapphirine–hercynite–quartz–plagioclase, formed at conditions averaging ~915 ± 35 °C, ~6.1 ± 0.9 kbar and ~42.9 ± 6.5 °C/km. The elevated average thermal gradient, combined with significant depths of burial, is anomalous for typical oceanic settings. This suggests that these sea-floor sediments were buried to ~22 km depths within the intra-oceanic subduction system, accreted onto the hanging-wall, and metamorphosed at high-T during subduction of a recently active spreading ridge. [4] A plausible plate tectonic arrangement that can account for the different metamorphic elements on the Arabian margin is one composed of divergent subduction systems: a relatively long-lived SW-dipping subduction zone at the continental margin, and a short-lived, NE-dipping intra-oceanic subduction system. Consumption of the intervening oceanic crust led to obduction of the Semail ophiolite and accreted metamorphic soles from the upper-plate of the floundered outboard subduction system. SW-directed obduction was initiated between 93.7 and 93.2 Ma and continued until ~84 Ma, producing lower-amphibolite to sub-greenschist facies retrograde fabrics in the metamorphic soles (M5) and sub-metamorphic melange in the footwall. [5] The lower-plate of the Saih Hatat window was reworked by top-to-NE extensional shear at epidote-greenschist facies grades (M6) between ~84 and 76 Ma. Crustal-scale structures were reactivated as extensional detachments that telescoped the continental margin, leading to isothermal decompression and development of an asymmetric core complex that segmented the Semail ophiolite and formed the Saih Hatat domal window.  相似文献   

18.
Shoreline displacement data from the Trondheimsfjord area have been collected and a synthesis of the Late Weichselian and Holocene relative uplift is presented. The isobase direction is N 30–35°E during the whole period. The gradients of the shorelines are 1.7? m/km at 11,800 years B.P., 1.3 m/km at 10,000 years B.P., gradually decreasing towards the present with a value of 0.2 m/km at 5,000 years B.P. Some irregularities in the shoreline gradient curve in the Late Weichselian and Preboreal chronozones may be ascribed to crustal readjustments by faults. An interpolation of the 9,500 years B.P. shoreline to the Ångermanland and Baltic area shows a relative uplift at 11,800 years B.P. of 400–450 m in the central area of glaciation. The island of Hitra was probably deglaciated at about 12,000 years B.P. and Ørlandet/Bjugn somewhat later. The Younger Dryas ice marginal deposits at Tautra have been deposited early in this chronozone, and deposits proximal to this at Hoklingen and Levanger were probably deposited in the late part of the same chronozone.  相似文献   

19.
The Campi Flegrei caldera in southern Italy is one of the greatest geohazard areas on Earth. Evidence of an active magmatic and geothermal system is provided by ongoing ground uplift, with volcano-tectonic and long-period (LP) seismicity, the persistent degassing of ~1500 tonnes of CO2 per day, the presence of hot fumaroles at temperatures of 90–150 °C, brine-rich aquifers (with total dissolved solids up to 33 g l?1) and high thermal gradients in the crust (with temperatures reaching 420 °C at 3,050 m b.s.l.). Since the 1940s, more than 100 exploratory boreholes have been drilled in the area to depths of 80–3,100 m by the Azienda Geologica Italiana Petroli (AGIP) and the Società Anonima Forze Endogene Napoletane (SAFEN). To date, however, no systematic reanalysis of the drilling data has been carried out, and the buried volcanic structure has not been updated using the most recent scientific results and previous findings. By integrating unpublished data from the AGIP and SAFEN reports with published information from geological, volcanological, petrological, petrophysical and geophysical studies, this paper presents an improved picture of the Campi Flegrei caldera that will be useful for volcanic hazard assessment and mitigation in the Naples area and for future research planning. The results suggest that intra-caldera activity has been influenced by how the magmatic system at depths greater than about 4 km has determined the transfer of magma, volatiles, and heat to the overlying geothermal system and, ultimately, to the surface. In particular, intriguing is that the most volcanically active central-eastern sector of the caldera, which is subject to intense bradyseismic ground movement and gas emission, coincides with a structurally delimited subsurface rock volume characterized by an uprising of the 100 °C isotherm, a deep water supply to the shallower aquifer, the early disappearance of secondary calcite, LP seismicity and high seismic S-wave attenuation. In this area, we also document evidence of repeated injection at depths of c. 1.5–3.0 km of isolated and small-volume batches of magma, where occurred their crystallization and degassing. Shallow intrusions and degassing of magma are thus identified as two of the key processes that drive unrest in Campi Flegrei.  相似文献   

20.
S. P. Korikovsky 《Petrology》2009,17(4):315-330
The paper is devoted to mineral equilibria occurring during the transformation of medium-pressure metabasites into eclogites at geothermal gradients of 11–19°C/km; it presents materials on the evolution of the composition and types of prograde zoning in garnet and clinopyroxene, significance and distinctive features of armored inclusions of earlier metamorphic stages in garnets and the possibility of their application in calculating the P-T path of eclogitization. Results of the analysis of mineral assemblages, data on mineral zoning, and evolution of phase equilibria are used to outline depth subfacies of crustal eclogites and describe in detail equilibria in basic and acid rocks of each subfacies. Conditions under which orthopyroxene is stable in the eclogite facies are analyzed within the temperature range of 630–700°C in correlation with the bulk composition of the eclogites. Published materials on high-pressure mineral transformations in eclogite-facies acid gneisses are analyzed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号