Experimental constraints on Fe isotope fractionation during magnetite and Fe carbonate formation coupled to dissimilatory hydrous ferric oxide reduction   总被引：3，自引：0，他引：3  

Clark M. Johnson  Eric E. Roden  Brian L. Beard 《Geochimica et cosmochimica acta》2005,69(4):963-993

Iron isotope fractionation between aqueous Fe(II) and biogenic magnetite and Fe carbonates produced during reduction of hydrous ferric oxide (HFO) by Shewanella putrefaciens, Shewanella algae, and Geobacter sulfurreducens in laboratory experiments is a function of Fe(III) reduction rates and pathways by which biogenic minerals are formed. High Fe(III) reduction rates produced ⁵⁶Fe/⁵⁴Fe ratios for Fe(II)_aq that are 2-3‰ lower than the HFO substrate, reflecting a kinetic isotope fractionation that was associated with rapid sorption of Fe(II) to HFO. In long-term experiments at low Fe(III) reduction rates, the Fe(II)_aq-magnetite fractionation is −1.3‰, and this is interpreted to be the equilibrium fractionation factor at 22°C in the biologic reduction systems studied here. In experiments where Fe carbonate was the major ferrous product of HFO reduction, the estimated equilibrium Fe(II)_aq-Fe carbonate fractionations were ca. 0.0‰ for siderite (FeCO₃) and ca. +0.9‰ for Ca-substituted siderite (Ca_0.15Fe_0.85CO₃) at 22°C. Formation of precursor phases such as amorphous nonmagnetic, noncarbonate Fe(II) solids are important in the pathways to formation of biogenic magnetite or siderite, particularly at high Fe(III) reduction rates, and these solids may have ⁵⁶Fe/⁵⁴Fe ratios that are up to 1‰ lower than Fe(II)_aq. Under low Fe(III) reduction rates, where equilibrium is likely to be attained, it appears that both sorbed Fe(II) and amorphous Fe(II)(s) components have isotopic compositions that are similar to those of Fe(II)_aq.The relative order of δ⁵⁶Fe values for these biogenic minerals and aqueous Fe(II) is: magnetite > siderite ≈ Fe(II)_aq > Ca-bearing Fe carbonate, and this is similar to that observed for minerals from natural samples such as Banded Iron Formations (BIFs). Where magnetite from BIFs has δ⁵⁶Fe >0‰, the calculated δ⁵⁶Fe value for aqueous Fe(II) suggests a source from midocean ridge (MOR) hydrothermal fluids. In contrast, magnetite from BIFs that has δ⁵⁶Fe ≤0‰ apparently requires formation from aqueous Fe(II) that had very low δ⁵⁶Fe values. Based on this experimental study, formation of low-δ⁵⁶Fe Fe(II)_aq in nonsulfidic systems seems most likely to have been produced by dissimilatory reduction of ferric oxides by Fe(III)-reducing bacteria.  相似文献   

The role of volatile exsolution and sub-solidus fluid/rock interactions in producing high Fe/Fe ratios in siliceous igneous rocks     

Adriana Heimann  Brian L. Beard  Clark M. Johnson 《Geochimica et cosmochimica acta》2008,72(17):4379-4396

Highly differentiated igneous rocks can, in some cases, have ⁵⁶Fe/⁵⁴Fe ratios that are significantly higher than those of mafic- to intermediate-composition igneous rocks. Iron isotope compositions were obtained for bulk rock, magnetite, and Fe silicates from well-characterized suites of granitic and volcanic rocks that span a wide range in major- and trace-element contents. Sample suites studied include granitoids from Questa, N.M. (Latir volcanic field) and the Tuolumne Intrusive Series (Sierra Nevada batholith), and volcanic rocks from Coso, Katmai, Bishop Tuff, Grizzly Peak Tuff, Seguam Island, and Puyehue volcano. The rocks range from granodiorite to high-silica granite and basalt to high-silica rhyolite. The highest δ⁵⁶Fe values (up to +0.31‰) are generally restricted to rocks that have high Rb (>100 ppm), Th (>∼15 ppm) and SiO₂ (>70 wt.%) but low Fe (<2 wt.% total Fe as Fe₂O₃) contents. Magnetite separated from these rocks has high δ⁵⁶Fe values, whereas Fe silicates have δ⁵⁶Fe values close to zero. Although in principle crystal fractionation might explain the high δ⁵⁶Fe values, trace-element ratios in high-δ⁵⁶Fe igneous rocks indicate that crystal fractionation is an unlikely explanation. The highest δ⁵⁶Fe values occur in volcanic and plutonic rocks that contain independent evidence for fluid exsolution, including sub-chondritic Zr/Hf ratios, suggesting that loss of a low-δ⁵⁶Fe ferrous chloride fluid is the most likely explanation for the high δ⁵⁶Fe values in the bulk rocks. Based on magnetite solubility in chloride solutions and predicted Fe isotope fractionations among Fe silicates, magnetite, and ferrous chloride fluids, the increase in δ⁵⁶Fe values of bulk rocks may be explained by isotopic exchange between magnetite and , which predicts an increase in the δ⁵⁶Fe values of magnetite upon fluid exsolution. This model is consistent with the δ⁵⁶Fe values measured in this study for bulk rocks, as well as magnetite and Fe silicates. Our results suggest that fluid exsolution from siliceous hydrous magmas, which sometimes produce porphyry-style Cu, Mo, or Cu-Au mineralization, may be traced using Fe isotopes.  相似文献   

Physicochemical formation conditions of banded iron formations and high-grade iron ores in the region of the Kursk Magnetic Anomaly: Evidence from isotopic data   总被引：1，自引：0，他引：1  

V. I. Belykh  E. I. Dunai  I. P. Lugovaya 《Geology of Ore Deposits》2007,49(2):147-159

The oxygen and carbon isotopic compositions of minerals from banded iron formations (BIFs) and high-grade ore in the region of the Kursk Magnetic Anomaly (KMA) were determined in order to estimate the temperature of regional metamorphism and the nature of rock-and ore-forming solutions. Magnetite and hematite of primary sedimentary or diagenetic origin have δ¹⁸O within the range from +2 to 6‰. During metamorphism, primary iron oxides, silicates, and carbonates were involved in thermal dissociation and other reactions to form magnetite with δ¹⁸O = +6 to +11‰. As follows from a low δ¹⁸O_av = ?3.5‰ of mushketovite (magnetite pseudomorphs after hematite) in high-grade ore, this mineral was formed as a product of hematite reduction by organic matter. The comparison of δ¹⁸O of iron oxides, siderite, and quartz from BIFs formed at different stages of the evolution of the Kursk protogeosyncline revealed specific sedimentation (diagenesis) conditions and metamorphism of the BIFs belonging to the Kursk and Oskol groups. BIF of the Oskol Group is distinguished by a high δ¹⁸O of magnetite compared to other Proterozoic BIFs. Martite ore differs from host BIF by a low δ¹⁸O = ?0.2 to ?5.9‰. This implies that oxygen from infiltration water was incorporated into the magnetite lattice during the martite formation. Surface water penetrated to a significant depth through tectonic faults and fractures.  相似文献   

Precambrian banded iron formations in the North China Craton: Silicon and oxygen isotopes and genetic implications     

《Ore Geology Reviews》2014

Banded iron formations (BIFs) are Precambrian chemical marine sedimentary formations that record major transitions of chemical composition, and oxidation–reduction state of oceans at the time of their deposition. In this paper, we report silicon and oxygen isotope compositions of a variety of BIFs from the North China Craton (NCC) in order to deduce the mechanism of their formation. Quartz in the various types of BIFs from the NCC are generally depleted in ³⁰Si, where δ³⁰Si_NBS-28 values range from − 2.0‰ to − 0.3‰ (average, − 0.8‰), similar to δ³⁰Si_NBS-28 values measured from modern submarine black chimneys and sinters. The δ¹⁸O_V-SMOW values of quartz in the BIFs are relatively high (8.1‰–21.5‰; average, 13.1‰), similar to those of siliceous rock formed by hydrothermal activities. The δ³⁰Si_NBS-28 values of quartz in magnetite bands are commonly lower than those of quartz in adjacent siliceous bands within the same sample, whereas δ¹⁸O_V-SMOW values are higher in the magnetite bands. A negative correlation is observed between δ³⁰Si_NBS-28 and δ¹⁸O_V-SMOW values of quartz from siliceous and magnetite bands in BIF from Fuping, Hebei Province. The isotopic compositions of silicon and oxygen of quartz in BIFs provide insights for the formation mechanisms of silicon–iron cyclothems in BIFs. After the silicon- and iron-rich hydrothermal solution was injected onto the seabed, the abrupt temperature drop caused oversaturation of silicic acid, resulting in rapid precipitation of SiO₂ and deposition of siliceous layers. Ferric hydroxide was precipitated later than SiO₂ because of low free-oxygen concentration in the ocean bottom. Progressive mixing of hydrothermal solution with seawater caused a continuous drop in temperature and an increase in Eh values, resulting in gradual oxidation of hydrothermal Fe^2 + and deposition of iron-rich layers. In summary, each silicon–iron cyclothem marks a large-scale submarine hydrothermal exhalation. The periodic nature of these exhalations resulted in the formation of regular silicon–iron cyclothems. The widespread distribution of BIFs indicates that volcanism and submarine hydrothermal exhalation were extensive; the low δ³⁰Si_NBS-28 and high δ¹⁸O _V-SMOW values of the BIFs indicate that the temperature of seawater was relatively high at the time of BIF formation, and that concentrations of Fe^2 + and H₄SiO₄ in seawater were saturated.  相似文献   

Geochemistry and origin of the Neoproterozoic Dahongliutan banded iron formation (BIF) in the Western Kunlun orogenic belt,Xinjiang (NW China)     

《Ore Geology Reviews》2017

The Neoproterozoic (593–532 Ma) Dahongliutan banded iron formation (BIF), located in the Tianshuihai terrane (Western Kunlun orogenic belt), is hosted in the Tianshuihai Group, a dominantly submarine siliciclastic and carbonate sedimentary succession that generally has been metamorphosed to greenschist facies. Iron oxide (hematite), carbonate (siderite, ankerite, dolomite and calcite) and silicate (muscovite) facies are all present within the iron-rich layers. There are three distinctive sedimentary facies BIFs, the oxide, silicate–carbonate–oxide and carbonate (being subdivided into ankerite and siderite facies BIFs) in the Dahongliutan BIF. They demonstrate lateral and vertical zonation from south to north and from bottom to top: the carbonate facies BIF through a majority of the oxide facies BIF into the silicate–carbonate–oxide facies BIF and a small proportion of the oxide facies BIF.The positive correlations between Al₂O₃ and TiO₂, Sc, V, Cr, Rb, Cs, Th and ∑REE (total rare earth element) for various facies of BIFs indicate these chemical sediments incorporate terrigenous detrital components. Low contents of Al₂O₃ (<3 wt%), TiO₂ (<0.15 wt%), ∑REE (5.06–39.6 ppm) and incompatible HFSEs (high field strength elements, e.g., Zr, Hf, Th and Sc) (<10 ppm), and high Fe/Ti ratios (254–4115) for a majority of the oxide and carbonate facies BIFs suggest a small clastic input (<20% clastic materials) admixtured with their original chemical precipitates. The higher abundances of Al₂O₃ (>3 wt%), TiO₂, Zr, Th, Cs, Sc, Cr and ∑REE (31.2–62.9 ppm), and low Fe/Ti ratios (95.2–236) of the silicate–carbonate–oxide facies BIF are consistent with incorporation of higher amounts of clastic components (20%–40% clastic materials). The HREE (heavy rare earth element) enrichment pattern in PAAS-normalized REE diagrams exhibited by a majority of the oxide and carbonate facies BIFs shows a modern seawater REE signature overprinted by high-T (temperature) hydrothermal fluids marked by strong positive Eu anomalies (Eu/Eu¹_PAAS = 2.37–5.23). The low Eu/Sm ratios, small positive Eu anomaly (Eu/Eu¹_PAAS = 1.10–1.58) and slightly MREE (middle rare earth element) enrichment relative to HREE in the silicate–carbonate–oxide facies BIF and some oxide and carbonate facies BIFs indicate higher contributions from low-T hydrothermal sources. The absence of negative Ce anomalies and the high Fe³⁺/(Fe³⁺/Fe²⁺) ratios (0.98–1.00) for the oxide and silicate–carbonate–oxide BIFs do not support ocean anoxia. The δ¹³C_V-PDB (−4.0‰ to −6.6‰) and δ¹⁸O_V-PDB (−14.0‰ to −11.5‰) values for siderite and ankerite in the carbonate facies BIF are, on average, ∼6‰ and ∼5‰ lower than those (δ¹³C_V-PDB = −0.8‰ to + 3.1‰ and δ¹⁸O_V-PDB = −8.2‰ to −6.3‰) of Ca–Mg carbonates from the silicate–carbonate–oxide facies BIF. This feature, coupled with the negative correlations between FeO, Eu/Eu¹_PAAS and δ¹³C_V-PDB, imply that a water column stratified with regard to the isotopic omposition of total dissolved CO₂, with the deeper water, from which the carbonate facies BIF formed, depleted in δ¹³C that may have been derive from hydrothermal activity.Integration of petrographic, geochemical, and isotopic data indicates that the silicate–carbonate–oxide facies BIF and part of the oxide facies BIF precipitated in a near-shore, oxic and shallow water environment, whereas a majority of the oxide and carbonate facies BIFs deposited in anoxic but Fe²⁺-rich deeper waters, closer to submarine hydrothermal vents. High-T hydrothermal solutions, with infusions of some low-T hydrothermal fluids, brought Fe and Si onto a shallow marine, variably mixed with detrital components from seawaters and fresh waters carrying continental landmass and finally led to the alternating deposition of the Dahongliutan BIF during regression–transgression cycles.The Dahongliutan BIF is more akin to Superior-type rather than Algoma-type and Rapitan-type BIF, and constitutes an additional line of evidence for the widespread return of BIFs in the Cryogenian and Ediacaran reflecting the recurrence of anoxic ferruginous deep sea and anoxia/reoxygenation cycles in the Neoproterozoic. In combination with previous studies on other Fe deposits in the Tianshuihai terrane, we propose that a Fe²⁺-rich anoxic basin or deep sea probably existed from the Neoproterozoic to the Early Cambrian in this area.  相似文献   

Ancient geochemical cycling in the Earth as inferred from Fe isotope studies of banded iron formations from the Transvaal Craton   总被引：8，自引：0，他引：8  

Clark M. Johnson  Brian L. Beard  Nicolas J. Beukes  Cornelis Klein  Julie M. O'Leary 《Contributions to Mineralogy and Petrology》2003,144(5):523-547

Variations in the isotopic composition of Fe in Late Archean to Early Proterozoic Banded Iron Formations (BIFs) from the Transvaal Supergroup, South Africa, span nearly the entire range yet measured on Earth, from –2.5 to +1.0‰ in ⁵⁶Fe/⁵⁴Fe ratios relative to the bulk Earth. With a current state-of-the-art precision of ±0.05‰ for the ⁵⁶Fe/⁵⁴Fe ratio, this range is 70 times analytical error, demonstrating that significant Fe isotope variations can be preserved in ancient rocks. Significant variation in Fe isotope compositions of rocks and minerals appears to be restricted to chemically precipitated sediments, and the range measured for BIFs stands in marked contrast to the isotopic homogeneity of igneous rocks, which have δ⁵⁶Fe=0.00±0.05‰, as well as the majority of modern loess, aerosols, riverine loads, marine sediments, and Proterozoic shales. The Fe isotope compositions of hematite, magnetite, Fe carbonate, and pyrite measured in BIFs appears to reflect a combination of (1) mineral-specific equilibrium isotope fractionation, (2) variations in the isotope compositions of the fluids from which they were precipitated, and (3) the effects of metabolic processing of Fe by bacteria. For minerals that may have been in isotopic equilibrium during initial precipitation or early diagenesis, the relative order of δ⁵⁶Fe values appears to decrease in the order magnetite > siderite > ankerite, similar to that estimated from spectroscopic data, although the measured isotopic differences are much smaller than those predicted at low temperature. In combination with on-going experimental determinations of equilibrium Fe isotope fractionation factors, the data for BIF minerals place additional constraints on the equilibrium Fe isotope fractionation factors for the system Fe(III)–Fe(II)–hematite–magnetite–Fe carbonate. δ⁵⁶Fe values for pyrite are the lowest yet measured for natural minerals, and stand in marked contrast to the high δ⁵⁶Fe values that are predicted from spectroscopic data. Some samples contain hematite and magnetite and have positive δ⁵⁶Fe values; these seem best explained through production of high ⁵⁶Fe/⁵⁴Fe reservoirs by photosynthetic Fe oxidation. It is not yet clear if the low δ⁵⁶Fe values measured for some oxides, as well as Fe carbonates, reflect biologic processes, or inorganic precipitation from low-δ⁵⁶Fe ferrous-Fe-rich fluids. However, the present results demonstrate the great potential for Fe isotopes in tracing the geochemical cycling of Fe, and highlight the need for an extensive experimental program for determining equilibrium Fe isotope fractionation factors for minerals and fluids that are pertinent to sedimentary environments.  相似文献   

Ammonium loss and nitrogen isotopic fractionation in biotite as a function of metamorphic grade in metapelites from western Maine, USA     

Birgit Plessen  Daniel E. Harlov  Charles V. Guidotti 《Geochimica et cosmochimica acta》2010,74(16):4759-4771

Ammonium fixed in micas of metamorphic rocks is a sensitive indicator both of organic-inorganic interactions during diagenesis as well as of the devolatilization history and fluid/rock interaction during metamorphism. In this study, a collection of geochemically well-characterized biotite separates from a series of graphite-bearing Paleozoic greenschist- to upper amphibolite-facies metapelites, western Maine, USA, were analyzed for ammonium nitrogen () contents and isotopic composition (δ¹⁵N_NH4) using the HF-digestion distillation technique followed by the EA-IRMS technique. Biotite separates, sampled from 9 individual metamorphic zones, contain 3000 to 100 ppm with a wide range in δ¹⁵N from +1.6‰ to +9.1‰. Average contents in biotite show a distinct decrease from about 2750 ppm for the lowest metamorphic grade (∼500 °C) down to 218 ppm for the highest metamorphic grade (∼685 °C). Decreasing abundances in are inversely correlated in a linear fashion with increasing K⁺ in biotite as a function of metamorphic grade and are interpreted as a devolatilization effect. Despite expected increasing δ¹⁵N_NH4 values in biotite with nitrogen loss, a significant decrease from the Garnet Zones to the Staurolite Zones was found, followed by an increase to the Sillimanite Zones. This pattern for δ¹⁵N_NH4 values in biotite inversely correlates with Mg/(Mg + Fe) ratios in biotite and is discussed in the framework of isotopic fractionation due to different exchange processes between or , reflecting devolatilization history and redox conditions during metamorphism.  相似文献   

Deciphering formation processes of banded iron formations from the Transvaal and the Hamersley successions by combined Si and Fe isotope analysis using UV femtosecond laser ablation   总被引：3，自引：0，他引：3  

Grit Steinhoefel  Friedhelm von Blanckenburg  Ingo Horn  Nicolas J. Beukes 《Geochimica et cosmochimica acta》2010,74(9):2677-5891

To investigate the genesis of BIFs, we have determined the Fe and Si isotope composition of coexisting mineral phases in samples from the ∼2.5 billion year old Kuruman Iron Formation (Transvaal Supergroup, South Africa) and Dales Gorges Member of the Brockman Iron Formation (Hamersley Group, Australia) by UV femtosecond laser ablation coupled to a MC-ICP-MS. Chert yields a total range of δ³⁰Si between −1.3‰ and −0.8‰, but the Si isotope compositions are uniform in each core section examined. This uniformity suggests that Si precipitated from well-mixed seawater far removed from its sources such as hydrothermal vents or continental drainage. The Fe isotope composition of Fe-bearing mineral phases is much more heterogeneous compared to Si with δ⁵⁶Fe values of −2.2‰ to 0‰. This heterogeneity is likely due to variable degrees of partial Fe(II) oxidation in surface waters, precipitation of different mineral phases and post-depositional Fe redistribution. Magnetite exhibits negative δ⁵⁶Fe values, which can be attributed to a variety of diagenetic pathways: the light Fe isotope composition was inherited from the Fe(III) precursor, heavy Fe(II) was lost by abiotic reduction of the Fe(III) precursor or light Fe(II) was gained from external fluids. Micrometer-scale heterogeneities of δ⁵⁶Fe in Fe oxides are attributed to variable degrees of Fe(II) oxidation or to isotope exchange upon Fe(II) adsorption within the water column and to Fe redistribution during diagenesis. Diagenetic Fe(III) reduction caused by oxidation of organic matter and Fe redistribution is supported by the C isotope composition of a carbonate-rich sample containing primary siderite. These carbonates yield δ¹³C values of ∼−10‰, which hints at a mixed carbon source in the seawater of both organic and inorganic carbon. The ancient seawater composition is estimated to have a minimum range in δ⁵⁶Fe of −0.8‰ to 0‰, assuming that hematite and siderite have preserved their primary Fe isotope signature. The long-term near-zero Fe isotope composition of the Hamersley and Transvaal BIFs is in balance with the assumed composition of the Fe sources. The negative Fe isotope composition of the investigated BIF samples, however, indicates either a perturbation of the steady state, or they have to be balanced spatially by deposition of isotopically heavy Fe. In the case of Si, the negative Si isotope signature of these BIFs stands in marked contrast to the assumed source composition. The deviation from potential source composition requires a complementary sink of isotopically heavy Si in order to maintain steady state in the basin. Perturbing the steady state by extraordinary hydrothermal activity or continental weathering in contrast would have led to precipitation of light Si isotopes from seawater. Combining an explanation for both elements, a likely scenario is a steady state ocean basin with two sinks. When all published Fe isotope records including BIFs, microbial carbonates, shales and sedimentary pyrites, are considered, a complementary sink for heavy Fe isotopes must have existed in Precambrian ocean basins. This Fe sink could have been pelagic sediments, which however are not preserved. For Si, such a complementary sink for heavy Si isotopes might have been provided by other chert deposits within the basin.  相似文献   

Geochemistry and Si–O–Fe isotope constraints on the origin of banded iron formations of the Yuanjiacun Formation,Lvliang Group,Shanxi, China     

《Ore Geology Reviews》2014

Banded iron formations (BIFs) within the Lvliang region of Shanxi Province, China, are hosted by sediments of the Yuanjiacun Formation, part of the Paleoproterozoic Lvliang Group. These BIFs are located in a zone where sedimentation changed from clastic to chemical deposition, indicating that these are Superior-type BIFs. Here, we present new major, trace, and rare earth element (REE) data, along with Fe, Si, and O isotope data for the BIFs in the Yuanjiacun within the Fe deposits at Yuanjiacun, Jianshan, and Hugushan. When compared with Post Archean Australian Shale (PAAS), these BIFs are dominated by iron oxides and quartz, contain low concentrations of Al₂O₃, TiO₂, trace elements, and the REE, and are light rare earth element (LREE) depleted and heavy rare earth element (HREE) enriched. The BIFs also display positive La, Y, and Eu anomalies, high Y/Ho ratios, and contain ³⁰Si depleted quartz, with high δ¹⁸O values that are similar to quartz within siliceous units formed during hydrothermal activity. These data indicate that the BIFs within the Yuanjiacun Formation were precipitated from submarine hydrothermal fluids, with only negligible detrital contribution. None of the BIF samples analyzed during this study have negative Ce anomalies, although a few have a positive Ce anomaly that may indicate that the BIFs within the Yuanjiacun Formation formed during the Great Oxidation Event (GOE) within a redox stratified ocean. The positive Ce anomalies associated with some of these BIFs are a consequence of oxidization and the formation of surficial manganese oxide that have preferentially adsorbed Ho, LREE, and Ce^4 +; these deposits formed during reductive dissolution at the oxidation–reduction transition zone or in deeper-level reducing seawater. The loss of Ce, LREE, and Ho to seawater and the deposition of these elements with iron hydroxides caused the positive Ce anomalies observed in some of the BIF samples, although the limited oxidizing ability of surface seawater at this time meant that Y/Ho and LREE/HREE ratios were not substantially modified, unlike similar situations within stratified ocean water during the Late Paleoproterozoic. Magnetite and hematite within the BIFs in the study area contain heavy Fe isotopes (⁵⁶Fe values of 0.24–1.27‰) resulting from the partial oxidation and precipitation of Fe^2 + to Fe^3 + in seawater. In addition, mass-independent fractionation of sulfur isotopes within pyrite indicates that these BIFs were deposited within an oxygen-deficient ocean associated with a similarly oxygen-deficient atmosphere, even though the BIFs within the Yuanjiacun Formation formed after initiation of the GOE.  相似文献   

The effect of early diagenesis on the Fe isotope compositions of porewaters and authigenic minerals in continental margin sediments   总被引：3，自引：0，他引：3  

Silke Severmann  Clark M. Johnson  James McManus 《Geochimica et cosmochimica acta》2006,70(8):2006-2022

Iron isotope compositions in marine pore fluids and sedimentary solid phases were measured at two sites along the California continental margin, where isotope compositions range from δ⁵⁶Fe = −3.0‰ to +0.4‰. At one site near Monterey Canyon off central California, organic matter oxidation likely proceeds through a number of diagenetic pathways that include significant dissimilatory iron reduction (DIR) and bacterial sulfate reduction, whereas at our other site in the Santa Barbara basin DIR appears to be comparatively small, and production of sulfides (FeS and pyrite) was extensive. The largest range in Fe isotope compositions is observed for Fe(II)_aq in porewaters, which generally have the lowest δ⁵⁶Fe values (minimum: −3.0‰) near the sediment surface, and increase with burial depth. δ⁵⁶Fe values for FeS inferred from HCl extractions vary between ∼−0.4‰ and +0.4‰, but pyrite is similar at both stations, where an average δ⁵⁶Fe value of −0.8 ± 0.2‰ was measured. We interpret variations in dissolved Fe isotope compositions to be best explained by open-system behavior that involves extensive recycling of Feflux. This study is the first to examine Fe isotope variations in modern marine sediments, and the results show that Fe isotopes in the various reactive Fe pools undergo isotopic fractionation during early diagenesis. Importantly, processes dominated by sulfide formation produce high-δ⁵⁶Fe values for porewaters, whereas the opposite occurs when Fe(III)-oxides are present and DIR is a major pathway of organic carbon respiration. Because shelf pore fluids may carry a negative δ⁵⁶Fe signature it is possible that the Fe isotope composition of ocean water reflects a significant contribution of shelf-derived iron to the open ocean. Such a signature would be an important means for tracing iron sources to the ocean and water mass circulation.  相似文献   

Unsteady diagenetic processes and sulfur biogeochemistry in tropical deltaic muds: Implications for oceanic isotope cycles and the sedimentary record   总被引：1，自引：0，他引：1  

Robert C. Aller  Vanessa Madrid  Josephine Y. Aller 《Geochimica et cosmochimica acta》2010,74(16):4671-4692

Sedimentary S cycling is usually conceptualized and interpreted within the context of steadily accreting (1-D) transport-reaction regimes. Unsteady processes, however, are common in many sedimentary systems and can result in dramatically different S reaction balances and diagenetic products than steady conditions. Globally important common examples include tropical deltaic topset and inner shelf muds such as those extending from the Amazon River ∼1600 km along the Guianas coast of South America. These deposits are characterized by episodic reworking of the surface seabed over vertical depths of ∼0.1-3 m. Reworked surface sediments act as unsteady, suboxic batch reactors, unconformably overlying relict anoxic, often methanic deposits, and have diagenetic properties largely decoupled from net accumulation of sediment. Despite well-oxygenated water and an abundant reactive organic matter supply, physical disturbance inhibits macrofauna, and benthic communities are dominated by microbial biomass across immense areas. In the surficial suboxic layer, molecular biological analyses, tracer experiments, sediment C/S/Fe compositions, and δ³⁴S, δ¹⁸O of pore water indicate close coupling of anaerobic C, S, and Fe cycles. δ¹⁸O- can increase by 2-3‰ during anaerobic recycling without net change in δ³⁴S-, demonstrating reduction coupled to complete anaerobic reoxidation to and a δ¹⁸O- reduction + reoxidation fractionation factor?12‰ (summed magnitudes). S reoxidation must be coupled to Fe-oxide reduction, contributing to high dissolved Fe²⁺ (∼1 mM) and Fe mobilization-export. The reworking of Amazon-Guianas shelf muds alone may isotopically alter δ¹⁸O- equivalent in mass to?25% of the annual riverine delivery of to the global ocean. Unsteady conditions result in preservation of unusually heavy δ³⁴S isotopic compositions of residual Cr reducible S, ranging from 0‰ to >30‰ in physically reworked deposits. In contrast, bioturbated facies adjacent to physically reworked regions accumulate isotopically light S (δ³⁴S to −20‰) in otherwise similar decomposition regimes. The isotopic patterns of both physically and biologically reworked regions can be simulated with simple diagenetic models. Heavy S isotopic signatures are largely a consequence of unsteady diffusion and progressive anaerobic burndown into underlying deposits, whereas isotopically depleted bioturbated deposits predominantly reflect biogenic diffusive scaling and isotopic distillation/diffusive pumping associated with reoxidation in burrow walls immediately adjacent to reduced zones. The S isotopic transition from unsteady physically controlled regions of the Amazon delta moving laterally into bioturbated facies mimics the transition of S isotopic patterns temporally in the geologic record during the rise of bioturbation. No special role for S disproportionation is required to explain these differences. The potential role of unsteady, suboxic diagenesis and dynamic reworking of sediments has been largely ignored in models of the evolution of surficial elemental cycling and interpretations of the geologic record.  相似文献   

Comparative carbonate and hydroxide complexation of cations in seawater     

Robert H. Byrne 《Geochimica et cosmochimica acta》2010,74(15):4312-5647

Comparative concentrations of carbonate and hydroxide complexes in natural solutions can be expressed in terms of reactions with bicarbonate that have no explicit pH dependence (). Stability constants for this reaction with n = 1 were determined using conventional formation constant data expressed in terms of hydroxide and carbonate. Available data indicate that stability constants appropriate to seawater at 25 °C expressed in the form are on the order of 10^4.2 for a wide range of cations (M^z+) with z = +1, +2 and +3. Φ₁ is sufficiently large that species appear to substantially dominate MOH^z−1 species in seawater. Evaluations of comparative stepwise carbonate and hydroxide stability constant behavior leading to the formation of n = 2 and n = 3 complexes suggest that carbonate complexes generally dominate hydroxide complexes in seawater, even for cations whose inorganic speciation schemes in seawater are currently presumed to be strongly dominated by hydrolyzed forms (). Calculated stability constants, and , indicate that the importance of carbonate complexation is sufficiently large that carbonate and hydroxide complexes would be generally comparable even if calculated Φ₂ and Φ₃ values are overestimated by two or more orders of magnitude. Inclusion of mixed ligand species in carbonate-hydroxide speciation models allows cation complexation intensities (M_T/[M^z+]) to be expressed in the following form: