首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
An unusual structural paragenesis, complicated by brachyanticlines, is revealed for the first time in the sedimentary cover of the West Siberian Plate by 3D seismic surveying. These are linear (in plan view) systems of en-echelon arranged low-amplitude normal faults related to wrench faults in the basement. On different sides off a wrench fault, the planes of normal faults dip in opposite directions, forming a helicoidal structure that resembles the blades of a propeller. In the section parallel to the wrench fault, the boundaries of the beds and normal fault planes dip in opposite directions as well. In the section across the strike of the normal faults converging toward the basement, the beds take the shape of an antiform with a crest sagged along the normal faults (flower structure). This structural assembly was formed as a result of interference of stress fields of horizontal shear in the vertical plane (induced by faulting in the basement) and in the horizontal plane (caused by gravity resistance of the cover). In this case, the displacements along the normal faults develop in both the vertical and, to a greater extent, horizontal directions, so that the faults in cover are actually characterized by normal-strike-slip kinematics. The regional N-S-trending compression of the West Siberian Plate is the main cause of shearing along the NW- and NE-trending faults in the basement, which make up a rhomb-shaped system in plan view. Petroliferous brachyanticlines, whose axes, notwithstanding tectonophysical laws, are oriented in the direction close to the maximum compression axis, are known in the large wrench fault zones of Western Siberia. Our experiments with equivalent materials showed that a local stress field arising at the ends of echeloned Riedel shears within a wrench fault zone may be a cause of the formation of such brachyanticlines. The progressive elongation of Riedel shears leads to the corresponding elongation of the brachyanticlines located between their ends. The performed study has shown that the known types of interference of elementary geodynamic settings such as horizontal shear along the vertical plane + horizontal compression (transpression) and horizontal shear along the vertical plane + horizontal extension (transtension) may be supplemented by combination of horizontal shears along the vertical and horizontal planes, resulting in tectonic lamination. By analogy, we propose to name this type of interference of elementary shear settings translamination. Petroliferous helicoidal structures arise in the given geodynamic setting of translamination.  相似文献   

2.
Upper crustal strike-slip duplexes provide an excellent opportunity to address the fundamental question of fault zone development and strain partitioning in an evolving system. Detailed field mapping of the Mesozoic Atacama fault system in the Coastal Cordillera of Northern Chile documents the progressive development of second- and third-order faults forming a duplex at a dilational jog between two overstepping master faults: the sinistral strike-slip, NNW-striking, Jorgillo and Bolfin faults. These are constituted by a meter-wide core of foliated S-C ultracataclasite and cataclasite, flanked by a damage zone of protocataclasite, splay faults and veins. Lateral separation of markers along master faults is on the order of a few kilometers. Second-order, NW-striking, oblique-slip subsidiary fault zones do not show foliated ultracataclasite; lateral sinistral separations are in the range of  10 to 200 m with a relatively minor normal dip-slip component. In turn, third-order, east–west striking normal faults exhibit centimetric displacement. Oblique-slip (sinistral–normal) fault zones located at the southern termination of the Bolfin fault form a well-developed imbricate fan structure. They exhibit a relatively simple architecture of extensional and extensional-shear fractures bound by low displacement shear fractures. Kinematic analysis of fault slip data from mesoscopic faults within the duplex area, document that the NW-striking and the EW-striking faults accommodate transtension and extension, respectively. Examination of master and subsidiary faults of the duplex indicates a strong correlation between total displacement and internal fault structure. Faults started from arrays of en echelon extensional/extensional-shear fractures that then coalesced into throughgoing strike-slip faults. Further displacement leads to the formation of discrete bands of cataclasite and ultracataclasite that take up a significant part of the total displacement. We interpret that the duplex formed by progressive linkage of horsetail-like structures at the southern tip of the Bolfin fault that joined splay faults coming from the Jorgillo and Coloso faults. The geometry and kinematics of faults is compared with that observed in analog models to gain an insight into the kinematic processes leading to complex strike-slip fault zones in the upper crust.  相似文献   

3.
ABSTRACT A conceptual model is proposed in which bulk transtension, or local transtension during bulk simple shear (resulting from mantle anisotropy contrasts or lithosphere rheology contrasts), of heterogeneously enriched lithospheric mantle, triggers localized K-rich magmatism, which focuses strain and causes nucleation of lithosphere-scale transtensional or strike-slip shear zones. Transtension-triggered magmatism is most likely to be located at sites of maximum metasomatism of the lithospheric mantle. Magma-generated fractures propagate upwards, nucleating zones of lithospheric weakness, which focus shear in narrow transcurrent faults or at basin margins. In this way, magmatism controls fault timing and location. Although volcanism will be coeval with fault development and volcanoes will appear fault-controlled, counterintuitively, our model suggests that faults are, in a sense, volcano-controlled. We suggest that this new transtension – K-rich magmatism – transcurrent faulting association represents a hitherto unrecognized genetic relationship as significant as, for example, the ocean island magma series.  相似文献   

4.
The stratigraphic architecture, structure and Cenozoic tectonic evolution of the Tan-Lu fault zone in Laizhou Bay, eastern China, are analyzed based on interpretations of 31 new 2D seismic lines across Laizhou Bay. Cenozoic strata in the study area are divided into two layers separated by a prominent and widespread unconformity. The upper sedimentary layer is made up of Neogene and Quaternary fluvial and marine sediments, while the lower layer consists of Paleogene lacustrine and fluvial facies. In terms of tectonics, the sediments beneath the unconformity can be divided into four main structural units: the west depression, central uplift, east depression and Ludong uplift. The two branches of the middle Tan-Lu fault zone differ in their geometry and offset: the east branch fault is a steeply dipping S-shaped strike-slip fault that cuts acoustic basement at depths greater than 8 km, whereas the west branch fault is a relatively shallow normal fault. The Tan-Lu fault zone is the key fault in the study area, having controlled its Cenozoic evolution. Based on balanced cross-sections constructed along transverse seismic line 99.8 and longitudinal seismic line 699.0, the Cenozoic evolution of the middle Tan-Lu fault zone is divided into three stages: Paleocene–Eocene transtension, Oligocene–Early Miocene transpression and Middle Miocene to present-day stable subsidence. The reasons for the contrasting tectonic features of the two branch faults and the timing of the change from transtension to transpression are discussed.  相似文献   

5.
Forward modeling of transpression–transtension, assuming homogeneous strain and a direct relationship between finite strain axes and foliation–lineation in tectonites, investigates fields of stability of foliation and lineation orientations in oblique convergence and divergence. Vertical foliation–horizontal lineation (VF–HL) develop for angles of convergence–divergence between 0 and 20°. With increasing finite strain, this narrow window of stability is further reduced; lineation switches to vertical in transpression and foliation switches to horizontal in transtension. If a shear zone contains VF–HL, it either developed as a zone very close to pure wrenching, or recorded low finite strain. The stability of VF–HL at high strain and higher angles of convergence is enhanced by lateral extrusion of material along transpression zones. VF–HL may be stabilized in magmatic bodies that progressively intrude transtension zones, if the wrench component of deformation partitions within them. Alternatively, if these bodies are dike-like, cool fast, and do not record large deformation, they take up the extension component of transtension through anisotropic volume addition, leaving a larger component of wrench deformation in the country rocks; this effect stabilizes VF–HL effectively at low strain, but only marginally so at high strain.  相似文献   

6.
The stratigraphic architecture, structure and Cenozoic tectonic evolution of the Tan-Lu fault zone in Laizhou Bay, eastern China, are analyzed based on interpretations of 31 new 2D seismic lines across Laizhou Bay. Cenozoic strata in the study area are divided into two layers separated by a prominent and widespread unconformity. The upper sedimentary layer is made up of Neogene and Quaternary fluvial and marine sediments, while the lower layer consists of Paleogene lacustrine and fluvial facies. In terms of tectonics, the sediments beneath the unconformity can be divided into four main structural units: the west depression, central uplift, east depression and Ludong uplift. The two branches of the middle Tan-Lu fault zone differ in their geometry and offset: the east branch fault is a steeply dipping S-shaped strike-slip fault that cuts acoustic basement at depths greater than 8 km, whereas the west branch fault is a relatively shallow normal fault. The Tan-Lu fault zone is the key fault in the study area, having controlled its Cenozoic evolution. Based on balanced cross-sections constructed along transverse seismic line 99.8 and longitudinal seismic line 699.0, the Cenozoic evolution of the middle Tan-Lu fault zone is divided into three stages: Paleocene–Eocene transtension, Oligocene–Early Miocene transpression and Middle Miocene to present-day stable subsidence. The reasons for the contrasting tectonic features of the two branch faults and the timing of the change from transtension to transpression are discussed.  相似文献   

7.
Mélanges occur as discontinuous, mappable, units along an extensive N–S-trending, steeply dipping zone of distributed shear in metamorphic complexes along the coast of central Chile. Large mélange zones, from north to south, near Chañaral, Los Vilos, Pichilemu, and Chiloé Island, contain variations in lithologic and structural detail, but are consistent in exhibiting cross-cutting fabric features indicating a progressive transition from earlier ductile to more brittle deformation. In the Infiernillo mélange near Pichilemu, Permian to Early Triassic, sub-horizontal schistosity planes of the Western Series schist are disrupted, incorporated into, and uplifted along high-angle, N–S- to NNE–SSW-trending brittle–ductile shears. Mylonitic and cataclastic zones within the mélange matrix indicate active lateral shear during cumulative exhumation from depths exceeding 12 km in some areas. Exotic lithologies, such as Carboniferous mafic amphibolite and blueschist, formed during earlier Gondwanide subduction, match well with similar rocks in the Bahia Mansa to Los Pabilos region 750 km to the south, suggesting possible dextral offset. The development of the Middle to Late Triassic, N–S=trending, near-vertical shear zones formed weaknesses in the crust facilitating later fault localization, gravitational collapse, and subduction erosion along the continental margin. The length and linearity of this zone of lateral movement, coincident with a general hiatus of regional arc magmatism during the Middle to Late Triassic, is consistent with large-scale dextral transpression, or possible transform movement, during highly oblique NNE–SSW convergence along the pre-Andean (Gondwana) margin. The resultant margin parallel N–S-trending shear planes may be exploited by seismically active faults along the present coastal area of Chile. The palaeo-tectonic setting during the transitional period between earlier Gondwanide (Devonian to Permian) and later Andean (Late Jurassic to present) subduction may have had some similarity to the presently active San Andreas transform system of California.  相似文献   

8.
Transpression   总被引：2，自引：0，他引：2  
Transpression is considered as a wrench or transcurrent shear accompanied by horizontal shortening across, and vertical lengthening along, the shear plane. A model for the strain in transpression is derived, from which the shape and orientation of the finite strain ellipsoid, and the stretch and rotation of lines can be determined. Shortening across the zone of transpression leads to oblate finite strain ellipsoids (k<1).By considering the superposition of small increments of strain various model deformation paths are computed. These are used to interpret the development of structures, such as en-échelon folds, in transpression zones. The incremental strain ellipsoid allows prediction of the orientation of the principal stresses and hence brittle structures within such zones. The model is also applied to bends and terminations of shear zones and used to interpret the observed patterns of folds and fractures in these.  相似文献   

9.
In transpression/transtension zones the strain is three-dimensional and rotational. This causes material to move through the plane of cross-section, often invalidating balancing and restoration within this plane. Methods are presented which allow the three-dimensional segmented, irregular, helical locus of an originally straight line to be constructed, in any direction, on a structure contour map of a folded and faulted surface. This construction depends on a knowledge of the kinematics of folding and faulting and can be modified to suit local conditions. The ratio of the length of the cylindrical envelope bounding this helical locus, to the sum of the lengths of the helical fragments between faults, gives the true stretch in the direction of the envelope. When the traces of the segmented helices are constructed in different directions on a deformed surface, the sectional finite-strain ellipse can be found for that surface. Knowledge of the dimensions of this ellipse and its orientation with respect to the kinematic axes of the transpression zone allows the tensor components to be constrained. This permits the three-dimensional boundary conditions to be determined and thus restored.The methods are applied to the Ardross Fault zone in central Scotland. The solutions suggest this fault zone underwent a phase of dextral transpression along a NW zone boundary during Hercynian E-W compression in the Scottish Midland Valley. Contemporaneous E-W dyke swarms and N-S regional flexures support these kinematics.  相似文献   

10.
The Main Recent Fault of the Zagros Orogen is an active major dextral strike-slip fault along the Zagros collision zone, generated by oblique continent–continent collision of the Arabian plate with Iranian micro-continent. Two different fault styles are observed along the Piranshahr fault segment of the Main Recent Fault in NW Iran. The first style is a SW-dipping oblique reverse fault with dextral strike-slip displacement and the second style consists of cross-cutting NE-dipping, oblique normal fault dipping to the NE with the same dextral strike-slip displacement. A fault propagation anticline is generated SW of the oblique reverse fault. An active pull-apart basin has been produced to the NE of the Piranshahr oblique normal fault and is associated with other sub-parallel NE-dipping normal faults cutting the reverse oblique fault. Another cross-cutting set of NE–SW trending normal faults are also exist in the pull-apart area. We conclude that the NE verging major dextral oblique reverse fault initiated as a SW verging thrust system due to dextral transpression tectonic of the Zagros collision zone and later it has been overprinted by the NE-dipping oblique normal fault producing dextral strike-slip displacement reflecting progressive change of transpression into transtension in the collision zone. The active Piranshahr pull-apart basin has been generated due to a releasing damage zone along the NW segment of the Main Recent Fault in this area at an overlap of Piranshahr oblique normal fault segment of the Main Recent Fault and the Serow fault, the continuation of the Main Recent Fault to the N.  相似文献   

11.
Differential shear stresses acting along or adjacent to a non-planar fault surface or shear zone may cause uneven acceleration during slip. Alternatively, at the initiating and closing stages of motion of parts of a stick-slip fault, localised shear stresses may be variable. Stress variation of this nature causes zones of relative compression and tension, especially close to the “stick” zones on the fault. In fissile rocks adjacent to the fault, kink bands form in zones of local relative compression, while stratal extension features such as veins, fractures and extensional crenulations might be expected in the corresponding zones of relative tension. Repetitive motion on the fault should therefore cause the development of a suite of kink bands superimposed on each other and on any complementary extensional structures. Field evidence indicates that the extensional structures are not developed to the same extent as the kinks, perhaps due to ductile flow during layer-parallel extension of phyllosilicate rocks.

The advantages of this model are that it does not require bulk shortening of the shear zone relative to the enclosing less strained rocks, nor does it depend on complex stress orientation changes.  相似文献   


12.
In analyzing deformation in rocks, it is important to ensure that the solutions obtained satisfy strain compatibility. This creates a challenge to understanding patterns of strain associated with shear zones, in which measured strain may appear incompatible with the strain in the shear zone walls. Flattening strains are common in natural shear zones with locally straight and parallel boundaries: to satisfy compatibility conditions such strains require volume loss across the shear zone or deviations from plane strain, with or without discontinuities between the shear zone and the wall rock. In the case of shear zones for which there is no evidence of volume loss or discontinuities along the shear zone walls, problems of strain compatibility may be resolved if individual shear zones are linked together in an appropriate fashion. Shear zones commonly occur in anastomosing arrays, and simple configurations of such arrays and the strains associated with them are examined. It is shown that local transpression with strain compatibility can be accounted for in this way. Quite complex local strain patterns can develop in simple arrays.  相似文献   

13.
Strain modeling shows that folds can form in transtension, particularly in simple shear-dominated transtension. Folds that develop in transtension do not rotate toward the shear zone boundary, as they do in transpression; instead they rotate toward the divergence vector, a useful feature for determining past relative plate motions. Transtension folds can only accumulate a fixed amount of horizontal shortening and tightness that are prescribed by the angle of oblique divergence, regardless of finite strain. Hinge-parallel stretching of transtensional folds always exceeds hinge-perpendicular shortening, causing constrictional fabrics and hinge-parallel boudinage to develop.These theoretical results are applied to structures that developed during oblique continental rifting in the upper crust (seismic/brittle) and the ductile crust. Examples include (1) oblique opening of the Gulf of California, where folds and normal faults developed simultaneously in syn-divergence basins; (2) incipient continental break-up in the Eastern California-Walker Lane shear zone, where earthquake focal mechanisms reflect bulk constrictional strain; and (3) exhumation of the ultrahigh-pressure terrain in SW Norway in which transtensional folds and large magnitude stretching developed in the footwall of detachment shear zones, consistent with constrictional strain. More generally, folds may be misinterpreted as indicating convergence when they can form readily in oblique divergence.  相似文献   

14.
The spatial-genetic relationships between transit fault systems of the East Asian global shear zone (EAGSZ) are analyzed. It is established that the EAGSZ internal structure between the Okhotsk and South China seas is identical to that of world-known natural and experimental shear zones, which confirms its development as an integral structure. The structural-kinematic analysis included the Tan-Lu-Sikhote-Alin (TS) system of left-lateral strike-slip faults (NNE 25°–30°) and the Bohai-Amur (BA) system of updip-strike-slip faults (NE 50°–70°). It is shown that these systems were formed as structural parageneses during two stages. The first and shear-thrust stage (Jurassic-Early Cretaceous) was marked by general NNW-oriented compression with the formation of the TS system of left-lateral strike-slip faults and their structural parageneses (compression structures) such as the BA system of updip-thrusts. The second, strike-slip-pull apart stage (Late Cretaceous-Cenozoic) was characterized by SE-directed tangential compression, which was generated by the SW left-lateral displacement of the continental crust along the Central Sikhote-Alin deep-seated fault. In such dynamic settings, the updip-thrust kinematics of the BA system gave way to that of left-lateral strike-slip faults. The strike-slip faults were formed in the transtension regime (shear with extension), which determined the development of pull-apart structures, where the left-lateral shear extension component played the decisive role. Simultaneously, the extension involved the Tan-Lu strike-slip fault with the formation of the rift valley and the discrete development of sedimentary basins along the latter.  相似文献   

15.
Strains in rocks can be observed but ancient stresses can only be inferred. We should re-examine the potential of strain geometry as the key to understanding and interpreting common shear structures ranging from faults to plastic shear zones. The concept of failure along zero extension directions can be applied to natural structures in rocks and is predicated on strain compatibility between differently strained volumes. Zero extension directions are considered for two strain configurations, plane strain (k=1) and uniaxial shortening (k=0). The crucial difference between shear fractures, or faults, and plastic yield zones is that the former are preceded by dilatation while the latter are isovolumetric. Volume changes during deformation affect the orientations of zero extension directions and hence of the resulting structures. With isovolumetric strain, yield occurs on planes at 45° to the principal shortening direction in plane strain and at 54.7° to this axis in uniaxial shortening. Uniaxial shortening experiments on rock samples allow estimation of the relative volumetric strains when yield zones initiate. When this volumetric strain is used to estimate the orientation of shear fractures in plane strain, ca 70° dips are predicted for normal faults at high crustal levels, decreasing downwards to 45°.  相似文献   

16.
The interplay between the emplacement of crustal blocks (e.g. “ALCAPA”, “Tisza”, “Dacia”) and subduction retreat is a key issue for understanding the Miocene tectonic history of the Carpathians. Coeval thrusting and basin formation is linked by transfer zones, such as the Mid-Hungarian fault zone, which seperates ALCAPA from Tisza-Dacia. The presented study provides new kinematic data from this transfer zone. Early Burdigalian (20.5 to ∼18.5 Ma) SE-directed thrusting of the easternmost tip of ALCAPA (Pienides), over Tisza-Dacia is linked to movements along the Mid-Hungarian fault zone and the Periadriatic line, accommodating the lateral extrusion of ALCAPA. Minor Late Burdigalian (∼18.5 to 16 Ma) NE-SW extension is interpreted as related to back-arc extension. Post Burdigalian (post-16 Ma) NE–SW shortening and NW–SE extension correlate with “soft collision” of Tisza-Dacia with the European foreland coupled with southward migration of active subduction. During this stage the Bogdan-Voda and Dragos-Voda faults were kinematically linked to the Mid-Hungarian fault zone. Sinistral transpression (16 to 12 Ma) at the Bogdan-Voda fault was followed by sinistral transtension (12–10 Ma) along the coupled Bogdan-Dragos-Voda fault system. During the transtensional stage left-lateral offset was reduced eastwards by SW trending normal faults, the fault system finally terminating in an extensional horse-tail splay.  相似文献   

17.
Fracture mechanics theory and field observations together indicate that the shear stress on many faults is non-uniform when they slip. If the shear stress were uniform, then: (a) a physically implausible singular stress concentration theoretically would develop at a fault end; and (b) a single curved ‘tail fracture’ should open up at the end of every fault trace, intersecting the fault at approximately 70 °. Tail fractures along many small faults instead range in number, commonly form behind fault trace ends, have nearly straight traces and intersect a fault at angles less than 50 °. A ‘cohesive zone’, in which the shear stress is elevated near the fault end, can eliminate the stress singularity and can account for the observed orientation, shape, and distribution of tail fractures. Cohesive zones also should cause a fault to bend. If the cohesive zone shear stress were uniform, then the distance from the fault end to the bend gives the cohesive zone length. The nearly straight traces of the tail fractures and the small bends observed near some fault ends implies that the faults slipped with low stress drops, less than 10% of the ambient fault-parallel shear stress.  相似文献   

18.
We used satellite imagery and field data to investigate the south‐westernmost Baikal rift zone. We focus our study in the Mondy and Ikhe Ukhgun valleys, site of an Mw = 6.9 seismic event in 1950. Surface deformations are observed along the E–W‐trending Mondy strike‐slip fault and along the Ikhe Ukhgun thrust. The Mondy fault system is 80 km long and is composed of four segments 10–15 km long. These segments are characterized by subvertical planes with left‐lateral movements. The Ikhe Ukhgun thrust is 20 km long, dips 40° to the south and shows reverse movement with a left‐lateral component. These observations are consistent with the present‐day regional NNE–SSW compression and with the focal mechanism of the 1950 Mondy earthquake that was recently re‐evaluated. These features, like those observed in the Tunka basin, demonstrate a recent change of regional strain regime from transtension to transpression that we place before the Late Pleistocene.  相似文献   

19.
詹润  朱光 《地质科学》2012,(4):1130-1150
青东凹陷东边界为郯庐断裂带在渤海海域内西支断裂所在,平面上由4条北北东向断裂呈左阶雁列式排列,剖面上以上盘下降为主,局部具有张扭性和压扭性花状构造现象。青东凹陷东界上的郯庐断裂新生代经历了古近纪右行平移正断层活动、古近纪末盆地挤压反转中的逆右行平移、新近纪的弱拉张活动和第四纪以来的逆右行平移4个演化阶段。古近纪断陷期,先存的郯庐断裂带由于具有较低的强度,在南北向伸展应力场作用下复活并表现为具有右行平移分量的斜向拉张活动,在浅部新生4条左阶雁列式断层,并与盆地内北西向基底断裂系统和东西向新生正断层共同控制了古近系的沉积格局。古近纪末发生了盆地反转,结束了断陷盆地发育阶段,在北东东-南西西向区域挤压应力作用下郯庐断裂表现为逆右行平移活动。新近纪坳陷阶段,盆地内构造活动较弱,主要受控于岩石圈热沉降作用,但郯庐断裂仍具有较弱的伸展活动。第四纪以来,郯庐断裂再次转变为逆右行平移活动。  相似文献   

20.
3D field data on mesoscale normal faults were collected to examine the geometries and growth of faults in multilayer systems. Observation and analysis of the fractures include the collection of geometric attributes such as fault dips and fault zone thicknesses, detailed mapping in cross-sections and plan views, and the construction of individual and cumulative displacement profiles. Fault zone growth is consistent with a “coherent model” and is strongly influenced by the multilayer system. In the limestone layers, faults grew in several steps, including opening and frictional sliding on 80° dipping segments. Faulting in clay layers was in the form of 40° dipping faults and sub-horizontal faults, the latter being mostly early features developed under the same extensional regime as normal faults and disturbing the fault architecture. The fault zone thickness increases with the limestone thickness and the presence of sub-horizontal faults in clay beds. Numerous connections occur in clay units. The moderate (≈0.08) and low (<0.03) mean displacement gradients in clays and in limestones respectively indicate that the vertical propagation of faults is inhibited in clay layers. Analysis of displacement along fault strike indicates that a 0.08 displacement gradient is associated with the horizontal propagation of fault segments in limestones. According to this value, the fault zones are much longer than expected. It is associated with ‘flat topped’ displacement profiles along some fault segments and connection between segments to form complex fault zones.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号