首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 24 毫秒
1.
When a vertical fault or dike scatters a normally incident TE-mode plane wave, the horizontal components of the electric and the magnetic fields vary along the direction perpendicular to the strike. This scattering is also responsible for the formation of a vertical component of the magnetic field, which also varies along the direction perpendicular to the strike. Analysis of the lateral variations of the field components permits the identification of the type of geological structure, either fault or dike, as well as an estimate of the position of the geological contacts and the electrical conductivity of each medium. Previous exact analytical solutions have shown that two Fourier cosine integrals can express each field component. A series of functions specified for each model represent the kernel of each integral. From the field components obtained from the first non-zero term of each series, we calculated the following functions: the dip angle and the ellipticity of the vertical polarization ellipse in a plane perpendicular to the strike of the structure, and the azimuth and the ellipticity of the horizontal ellipse. We established master-curves of these functions for the interpretation of vertical faults and dikes for the polarization ellipsoid, for instance VLF or audio-frequency methods. This representation has as variable the induction number     , and as parameters σ 2/ σ 1 and     , where a denotes the half-thickness of the dike. The interpretation procedure using curve fitting is possible because the induction number is represented on a logarithmic scale. This procedure represents an important step before automatic interpretation is carried out. Two case histories using field data illustrate the effectiveness of the procedure and the type of quantitative interpretation obtained from it.  相似文献   

2.
We have developed a least-squares method to determine simultaneously the depth and the width of a buried thick dipping dike from residualized magnetic data using filters of successive window lengths. The method involves using a relationship between the depth and the half-width of the source and a combination of windowed observations. The relationship represents a family of curves (window curves). For a fixed window length, the depth is determined for each half-width value by solving one nonlinear equation of the form f (z) = 0 using the least-squares method. The computed depths are plotted against the width values representing a continuous curve. The solution for the depth and the width of the buried dike is read at the common intersection of the window curves. The method involves using a dike model convolved with the same moving average filter as applied to the observed data. As a result, this method can be applied to residuals as well as to measured magnetic data. Procedures are also formulated to estimate the amplitude coefficient and the index parameter. The method is applied to theoretical data with and without random errors. The validity of the method is tested on airborne magnetic data from Canada and on a vertical component magnetic anomaly from Turkey. In all cases examined, the model parameters obtained are in good agreement with the actual ones and with those given in the published literature.  相似文献   

3.
In this paper, I introduce a new approach based on truncated singular value decomposition (TSVD) analysis for improving implementation of grid-based Euler deconvolution with constraints of quasi 2D magnetic sources. I will show that by using TSVD analysis of the gradient matrix of magnetic field anomaly (reduced to pole) for data points located within a square window centered at the maximum of the analytic signal amplitude, we are able to estimate the strike direction and dip angle of 2D structures from the acquired eigenvectors. It is also shown that implementation of the standard grid-based Euler deconvolution can be considerably improved by solving the Euler's homogeneity equation for source location and structural index, simultaneously, using the TSVD method. The dimensionality of the magnetic anomalies can be indicated from the ratio between the smallest and intermediate eigenvalues acquired from the TSVD analysis of the gradient matrix. For 2D magnetic sources, the uncertainty of the estimated source location and structural index is significantly reduced by truncating the smallest eigenvalue.Application of the method is demonstrated on an aeromagnetic data set from the Åsele area in Sweden. The geology of this area is dominated by several dike swarms. For these dolerite dikes, the introduced method has provided useful information of strike directions and dip angles in addition to the estimated source location and structural index.  相似文献   

4.
We have developed a least‐squares minimization approach to depth determination using numerical second horizontal derivative anomalies obtained from magnetic data with filters of successive window lengths (graticule spacings). The problem of depth determination from second‐derivative magnetic anomalies has been transformed into finding a solution to a non‐linear equation of the form, f(z) = 0. Formulae have been derived for a sphere, a horizontal cylinder, a dike and a geological contact. Procedures are also formulated to estimate the magnetic angle and the amplitude coefficient. We have also developed a simple method to define simultaneously the shape (shape factor) and the depth of a buried structure from magnetic data. The method is based on computing the variance of depths determined from all second‐derivative anomaly profiles using the above method. The variance is considered a criterion for determining the correct shape and depth of the buried structure. When the correct shape factor is used, the variance of depths is less than the variances computed using incorrect shape factors. The method is applied to synthetic data with and without random errors, complicated regionals, and interference from neighbouring magnetic rocks. Finally, the method is tested on a field example from India. In all the cases examined, the depth and the shape parameters are found to be in good agreement with the actual parameters.  相似文献   

5.
Surface wave analysis is usually applied as a 1D tool to estimate VS profiles. Here we evaluate the potential of surface wave analysis for the case of lateral variations. Lateral variations can be characterized by exploiting the data redundancy of the ground roll contained in multifold seismic data. First, an automatic processing procedure is applied that allows stacking dispersion curves obtained from different records and which retrieves experimental uncertainties. This is carried out by sliding a window along a seismic line to obtain an ensemble of dispersion curves associated to a series of spatial coordinates. Then, a laterally constrained inversion algorithm is adopted to handle 2D effects, although a 1D model has been assumed for the forward problem solution. We have conducted different tests on three synthetic data sets to evaluate the effects of the processing parameters and of the constraints on the inversion results. The same procedure, applied to the synthetic data, was then tested on a field case. Both the synthetic and field data show that the proposed approach allows smooth lateral variations to be properly retrieved and that the introduction of lateral constraints improves the final result compared to individual inversions.  相似文献   

6.
Measurement of the electric field data due to an inductive loop source in a controlled source electromagnetic survey is not common, because electric field data, usually involving grounded electrodes, are expensive to acquire and difficult to interpret. With the recently developed capability of versatile three‐dimensional inversion, we revisit the idea of measuring electric field in a large ground loop survey for mineral exploration. The three‐dimensional modelling and inversion approach helps us quantitatively understand the detectability and recoverability of the proposed survey configuration. Our detectability study using forward modelling shows that the relative anomaly (percentage difference) in electric field does not decay with a lower induction number, but the conventional magnetic field data (dB/dt) does. Our recoverability study examines how much and what kind of information can be extracted from electric field data for the reconstruction of a three‐dimensional model. Synthetic inversions show the following observations. (i) Electric field data are good at locating lateral discontinuity, whereas dB/dt has better depth resolution. (ii) Electric field is less sensitive to the background conductivity and, thus, is prone to misinterpretation because of a bad initial model in inversion. We recommend warm‐starting the electric field inversion with an initial model from a separate dB/dt inversion. (iii) Electric field data may be severely contaminated by near‐surface heterogeneity, but an inversion can recover the deep target concealed by the geologic noise. (iv) Even one line of single‐component electric field data can greatly improve the horizontal resolution in a dB/dt inversion. Finally, we investigate a field dataset of both electric field and dB/dt measurements at a uranium deposit. The field example confirms that the electric field and magnetic field data contain independent information that is crucial in the accurate recovery of subsurface conductivity. Our synthetic and field examples demonstrate the benefit of acquiring electric field data along with magnetic field data in an inductive source survey.  相似文献   

7.
A genetic algorithm (GA) is an artificial intelligence method used for optimization. We applied a GA to the inversion of magnetic anomalies over a thick dike. Inversion of nonlinear geophysical problems using a GA has advantages because it does not require model gradients or well-defined initial model parameters. The evolution process consists of selection, crossover, and mutation genetic operators that look for the best fit to the observed data and a solution consisting of plausible compact sources. The efficiency of a GA on both synthetic and real magnetic anomalies of dikes by estimating model parameters, such as depth to the top of the dike (H), the half-width of the dike (B), the distance from the origin to the reference point (D), the dip of the thick dike (δ), and the susceptibility contrast (k), has been shown. For the synthetic anomaly case, it has been considered for both noise-free and noisy magnetic data. In the real case, the vertical magnetic anomaly from the Pima copper mine in Arizona, USA, and the vertical magnetic anomaly in the Bayburt–Sar?han skarn zone in northeastern Turkey have been inverted and interpreted. We compared the estimated parameters with the results of conventional inversion methods used in previous studies. We can conclude that the GA method used in this study is a useful tool for evaluating magnetic anomalies for dike models.  相似文献   

8.
The Cappadocia region, located in Central Turkey, is characterized by widespread lava flows and volcanoclastic deposits dating from Miocene to Quaternary. Gravity and aeromagnetic anomalies of the region appear to present similar high and low amplitude regions, although the aeromagnetic anomalies exhibit a rather complex pattern which is thought to be caused by remanent magnetization. The low-pass filtered aeromagnetic map shows a deep-seated magnetic anomaly which may be linked to the widespread volcanic activity at the surface. The pseudogravity transformation of the upward continued anomaly has been constructed. The pseudogravity anomaly demonstrates some form of clockwise rotation. This anomaly was modelled by means of a three-dimensional method. The top and bottom of the body are at 6.3km and 11km (including the flight height) from the ground surface, respectively. This deep body is ellipsoidal and extends along an E-W direction, which is in line with the regional stress direction deduced from GPS measurements. A new mobilistic dynamo-tectonic system appears to explain the body’s E-W elongation. The modelled body may be the source for the inferred geothermal energy of the region. Magnetic measurements were carried out on oriented rock samples collected from outcrops of ignimbrites and basalts, providing directions and intensities of remanent magnetization, susceptibilities and Koeningsberger (Q) ratios. Standard deviations of remanent directions of the Natural Remanent Magnetization (NRM) display a wide scatter implying unreliability of the surface data. Reduction to pole (RTP) transformation of magnetic anomalies was successful with the induced magnetization angle despite the complex pattern of magnetic anomalies.  相似文献   

9.
Introduction Ready and Renkin (1971) were the first to make the research on anisotropy problems in magnetotellurics (MT). The progress in the research is not evident because it is more complex and difficult than isotropic problems. Now, the one-dimensional (1D) anisotropy problems in MT have been well solved, while for the two-dimensional (2D) cases, the numerical solutions have only been obtained for some particular conditions (Ready and Renkin, 1975). As to the three-dimensional (3D) ani…  相似文献   

10.
We have developed a method for imaging magnetic data collected for mineral exploration to yield the following structural information: depth, model type (structural index) and susceptibility. The active nature of mineral exploration data requires we derive the structural information from a robust quantity: we propose that the first‐ or second‐order analytic‐signal amplitude is suitably stable. The procedure is to normalize the analytic‐signal amplitude by the peak value and then use non‐linear inversion to estimate the depth and the structural index for each anomaly. In our field example, different results are obtained depending on whether we inverted for the first‐ or second‐order analytic‐signal amplitude. This is probably because the two‐dimensional contact, thin sheet or horizontal cylinder models we have assumed are not appropriate. In cases such as these, when our model assumptions are not correct, the results should not be interpreted quantitatively, but they might be useful for giving a qualitative indication of how the structure might vary. With a priori information, it is possible to assume a model type (i.e. set the structural index) and generate estimates of the depth and susceptibility. These data can then be gridded and imaged. If a contact is assumed, the susceptibility contrast is estimated; for the dike model, the susceptibility‐thickness is estimated; for the horizontal cylinder, the susceptibility‐area is estimated. To emphasize that the results are dependent on our assumed model, we advocate prefixing any derived quantity by the term ‘apparent’.  相似文献   

11.
A two‐and‐half dimensional model‐based inversion algorithm for the reconstruction of geometry and conductivity of unknown regions using marine controlled‐source electromagnetic (CSEM) data is presented. In the model‐based inversion, the inversion domain is described by the so‐called regional conductivity model and both geometry and material parameters associated with this model are reconstructed in the inversion process. This method has the advantage of using a priori information such as the background conductivity distribution, structural information extracted from seismic and/or gravity measurements, and/or inversion results a priori derived from a pixel‐based inversion method. By incorporating this a priori information, the number of unknown parameters to be retrieved becomes significantly reduced. The inversion method is the regularized Gauss‐Newton minimization scheme. The robustness of the inversion is enhanced by adopting nonlinear constraints and applying a quadratic line search algorithm to the optimization process. We also introduce the adjoint formulation to calculate the Jacobian matrix with respect to the geometrical parameters. The model‐based inversion method is validated by using several numerical examples including the inversion of the Troll field data. These results show that the model‐based inversion method can quantitatively reconstruct the shapes and conductivities of reservoirs.  相似文献   

12.
We propose a robust approach for the joint inversion of PP‐ and PSV‐wave angle gathers along different azimuths for the elastic properties of the homogeneous isotropic host rock and excess compliances due to the presence of fractures. Motivated by the expression of fluid content indicator in fractured reservoirs and the sensitivity of Lamé impedances to fluid type, we derive PP‐ and PSV‐wave reflection coefficients in terms of Lamé impedances, density, and fracture compliances for an interface separating two horizontal transversely isotropic media. Following a Bayesian framework, we construct an objective function that includes initial models. We employ the iteratively reweighted least‐squares algorithm to solve the inversion problem to estimate unknown parameters (i.e., Lamé impedances, density, and fracture compliances) from PP‐ and PSV‐wave angle gathers along different azimuths. Synthetic tests reveal that the unknown parameters estimated using the joint inversion approach match true values better than those estimated using a PP‐wave amplitude inversion only. A real data test indicates that reasonable results for subsurface fracture detection are obtained from the joint inversion approach.  相似文献   

13.
The calculable magnitudes of the anomalous magnetic field from simple 2D sources and their gradients and Laplacians appear as ratios that can be synthesized in functional forms, corresponding to the different source shapes. Field components and first‐order derivatives are involved in the inversion procedures presented. The structural index and source depth are estimated independently of each other. The applied functions allow magnetic profiles and magnetic maps to be shape‐ and depth‐converted with immediate imaging of the inversion results. The contours of these functions outline elongated loops around the 2.5D anomaly axis on magnetic maps. The width of the loops reflects the depth and structural index N of the source in the scale units of the inverted map. Model and field tests illustrate the effectiveness of this approach for fast automatic inversion of large sets of magnetic data for depth, shape, length and location of simple sources.  相似文献   

14.
Dikes are natural records that can be used to understand the way magma flows in the crust. Coastal platform outcrops in Gosung, South Korea, show clear evidences that their intrusion took place along pre‐existing fractures. We analyzed outcropping dikes, measuring variations in dike thickness as well as fracture density (cumulative number of fractures along strike) and geometry around the dikes. The geometry and thickness variations of dikes intruded along pre‐existing fractures can be interpreted to understand the effect of pre‐existing fractures to evolution on magma flow, especially related with fault damage zones. This helps us to gain a better understanding of magma and fluid flow along pre‐existing fractures. Magma flow is greater along planes that strike perpendicular to the direction of least compressive horizontal stress, and along well connected fractures that show a high degree of connectivity. At the fault tip and linkage damage zone, there is a concentration of extensional fractures; in these areas injected dikelets can form. As faults become linked, the fracture density increases, until they become fully linked and act as one through‐going fault plane. As faults evolve, the boundary conditions of the faults vary and this has an impact on dike characteristics. Fracture geometry around dikes that intruded pre‐existing faults can be used as a record of fault evolution and this can give insights into how the maturity of a fault system can affect to the related magma or fluid flow characteristics.  相似文献   

15.
A major complication caused by anisotropy in velocity analysis and imaging is the uncertainty in estimating the vertical velocity and depth scale of the model from surface data. For laterally homogeneous VTI (transversely isotropic with a vertical symmetry axis) media above the target reflector, P‐wave moveout has to be combined with other information (e.g. borehole data or converted waves) to build velocity models for depth imaging. The presence of lateral heterogeneity in the overburden creates the dependence of P‐wave reflection data on all three relevant parameters (the vertical velocity VP0 and the Thomsen coefficients ε and δ) and, therefore, may help to determine the depth scale of the velocity field. Here, we propose a tomographic algorithm designed to invert NMO ellipses (obtained from azimuthally varying stacking velocities) and zero‐offset traveltimes of P‐waves for the parameters of homogeneous VTI layers separated by either plane dipping or curved interfaces. For plane non‐intersecting layer boundaries, the interval parameters cannot be recovered from P‐wave moveout in a unique way. Nonetheless, if the reflectors have sufficiently different azimuths, a priori knowledge of any single interval parameter makes it possible to reconstruct the whole model in depth. For example, the parameter estimation becomes unique if the subsurface layer is known to be isotropic. In the case of 2D inversion on the dip line of co‐orientated reflectors, it is necessary to specify one parameter (e.g. the vertical velocity) per layer. Despite the higher complexity of models with curved interfaces, the increased angle coverage of reflected rays helps to resolve the trade‐offs between the medium parameters. Singular value decomposition (SVD) shows that in the presence of sufficient interface curvature all parameters needed for anisotropic depth processing can be obtained solely from conventional‐spread P‐wave moveout. By performing tests on noise‐contaminated data we demonstrate that the tomographic inversion procedure reconstructs both the interfaces and the VTI parameters with high accuracy. Both SVD analysis and moveout inversion are implemented using an efficient modelling technique based on the theory of NMO‐velocity surfaces generalized for wave propagation through curved interfaces.  相似文献   

16.
A workflow for simultaneous joint PP‐PS prestack inversion of data from the Schiehallion field on the United Kingdom Continental Shelf is presented and discussed. The main challenge, describing reasonable PS to PP data registration before any prestack or joint PP‐PS inversion, was overcome thanks to a two‐stage process addressing the signal envelope, then working directly on the seismic data to estimate appropriate time‐variant time‐shift volumes. We evaluated the benefits of including PS along with PP prestack seismic data in a joint inversion process to improve the estimated elastic property quality and also to enable estimation of density compared with other prestack and post‐stack inversion approaches. While the estimated acoustic impedance exhibited a similar quality independent of the inversion used (PP post‐stack, PP prestack or joint PP‐PS prestack inversion) the shear impedance estimation was noticeably improved by the joint PP‐PS prestack inversion when compared to the PP prestack inversion. Finally, the density estimated from joint PP and PS prestack data demonstrated an overall good quality, even where not well‐controlled. The main outcome of this study was that despite several data‐related limitations, inverting jointly correctly processed PP and PS data sets brought extra value for reservoir delineation as opposed to PP‐only or post‐stack inversion.  相似文献   

17.
Magnetic data interpretation faces difficulties due to the various shapes of magnetic anomalies and the positions of their extrema with respect to the causative bodies for different directions of the source magnetization. The well‐known transforms — reduction to the pole, pseudogravity field, and analytic signal (total gradient) — help in reducing the problem. Another way to achieve the required effect is the transformation of magnetic data, ΔT or Z, into values of the anomalous magnetic intensity T. In this respect, we have found some transforms based on differential operators such as the gradient of T and its modulus R = |?T|, the Laplacian L = ?2T, the product T ?2T and its square root Q, and the Laplacian ?2(T2) and its square root E, to be useful. They are slightly sensitive to the magnetization orientation and their extrema occur above the sources. For a 2D anomaly of a homogeneous causative body, the proposed transforms do not depend on the inclination of magnetization. In the 3D case, such independence does not exist even for the elementary field of a point dipole. The influence of the magnetization direction is estimated by an integral coefficient of sensitivity. This coefficient takes values of up to 2.0 for ΔT or Z anomalies, while their transforms T, R, E, Q and L have values of less than 0.28, 0.29, 0.24, 0.16 and 0.07, respectively, i.e. on average, 10 times less. The estimation of the centricity is carried out using the relative deviation of the principal extremum of the anomaly or its transforms from the epicentre of the model body at a depth equal to 100 units. For a ΔT anomaly this deviation is up to 67%; for the L transform it is less than 8%; for Q, E, R and T it is less than 10%, 15%, 20% and 25%, respectively. The proposed transforms take only non‐negative values. With respect to their shape, the peripheral magnetic extrema are removed, the anomalous configuration is simplified and the resolution of complicated interference patterns is improved. Their calculation does not require additional data for the direction of magnetization, which is an essential advantage over the reduction‐to‐the‐pole and pseudogravity‐field transforms. A joint analysis of the measured field and its transforms T, E and L offers possibilities for more confident separation of the anomalous effects and direct correlation to their sources. The model tests performed and the 3D field applications to real magnetic data confirm the useful properties of the transforms suggested here.  相似文献   

18.
Fractures in elastic media add compliance to a rock in the direction normal to the fracture strike. Therefore, elastic wave velocities in a fractured rock will vary as a function of the energy propagation direction relative to the orientation of the aligned fracture set. Anisotropic Thomson–Haskell matrix Rayleigh-wave equations for a vertically transverse isotropic media can be used to model surface-wave dispersion along the principal axes of a vertically fractured and transversely isotropic medium. Furthermore, a workflow combining first-break analysis and azimuthal anisotropic Rayleigh-wave inversion can be used to estimate P-wave and S-wave velocities, Thomsen's ε, and Thomsen's δ along the principal axes of the orthorhombic symmetry. In this work, linear slip theory is used to map our inversion results to the equivalent vertically fractured and transversely isotropic medium coefficients. We carried out this inversion on a synthetic example and a field example. The synthetic data example results show that joint estimation of S-wave velocities with Thomsen's parameters ε and δ along normal and parallel to the vertical fracture set is reliable and, when mapped to the corresponding vertically fractured and transversely isotropic medium, provides insight into the fracture compliances. When the inversion was carried out on the field data, results indicated that the fractured rock is more compliant in the azimuth normal to the visible fracture set orientation and that the in situ normal fracture compliance to tangential fracture compliance ratio is less than half, which implies some cementation may have occurred along the fractures. Such an observation has significant implications when modelling the transport properties of the rock and its strength. Both synthetic and field examples show the potential of azimuthal anisotropic Rayleigh-wave inversion as the method can be further expanded to a more general case where the vertical fracture set orientation is not known a priori.  相似文献   

19.
A numerical comparison of 2D resistivity imaging with 10 electrode arrays   总被引：9，自引：0，他引：9  
Numerical simulations are used to compare the resolution and efficiency of 2D resistivity imaging surveys for 10 electrode arrays. The arrays analysed include pole‐pole (PP), pole‐dipole (PD), half‐Wenner (HW), Wenner‐α (WN), Schlumberger (SC), dipole‐dipole (DD), Wenner‐β (WB), γ‐array (GM), multiple or moving gradient array (GD) and midpoint‐potential‐referred measurement (MPR) arrays. Five synthetic geological models, simulating a buried channel, a narrow conductive dike, a narrow resistive dike, dipping blocks and covered waste ponds, were used to examine the surveying efficiency (anomaly effects, signal‐to‐noise ratios) and the imaging capabilities of these arrays. The responses to variations in the data density and noise sensitivities of these electrode configurations were also investigated using robust (L1‐norm) inversion and smoothness‐constrained least‐squares (L2‐norm) inversion for the five synthetic models. The results show the following. (i) GM and WN are less contaminated by noise than the other electrode arrays. (ii) The relative anomaly effects for the different arrays vary with the geological models. However, the relatively high anomaly effects of PP, GM and WB surveys do not always give a high‐resolution image. PD, DD and GD can yield better resolution images than GM, PP, WN and WB, although they are more susceptible to noise contamination. SC is also a strong candidate but is expected to give more edge effects. (iii) The imaging quality of these arrays is relatively robust with respect to reductions in the data density of a multi‐electrode layout within the tested ranges. (iv) The robust inversion generally gives better imaging results than the L2‐norm inversion, especially with noisy data, except for the dipping block structure presented here. (v) GD and MPR are well suited to multichannel surveying and GD may produce images that are comparable to those obtained with DD and PD. Accordingly, the GD, PD, DD and SC arrays are strongly recommended for 2D resistivity imaging, where the final choice will be determined by the expected geology, the purpose of the survey and logistical considerations.  相似文献   

20.
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号