首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 343 毫秒
1.
Three-hundred and thirty-one sediment cores, including six sediment types(clayey-and sandy-silt, silty-and sandy-clay, clayey-and silty-sand) were collected from the shallow and semi-deep seas of the South China Sea, and the P-wave velocities and physical properties of core sediments were measured under standard laboratory conditions. To eliminate the influence of environmental factors, the empirical sound speed ratio equations were established. Compared with several equations from literature, the porosity and wet bulk density empirical equations established in this paper agree well with Richardson and Briggs(2004)'s in-situ equations, which implies that our empirical equations can be used in the similar region of world's oceans under certain conditions and will be useful in areas lacking first-hand P-wave speed data. However, the mean grain size equations established in this study, similar to the previous studies, have low accuracy, which may be due to the different particle arrangements and degrees of compaction in sediments. The results also show that for different sediment types, the equation based on all sediment data is in good agreement with the measured data in the study area, as there are both siliciclastic and carbonate sediments on the studied seabed. It is suggested that appropriate empirical equations should be selected according to sediment types and sedimentary environment in future works, and the empirical equation of porosity or the two-parameter equation of porosity and grain size should be preferred.  相似文献   

2.
This paper presents results of a study on the mechanical properties of sandy and gravely soils within the Cordillera Blanca, Peru. The soils were divided into groups according to their origin （glacial, fluvial, or debris flow）. The grain size distribution of forty three soil samples was used to classify the soils according to the scheme of the Unified Soil Classification System （USCS）. These distributions have then been used to estimate shear strength and hydraulic properties of the soils. There are clear differences between the soils which reflect their divergent origins. The glacial soils normally fit within one of two distinctive groups according to the proportion of fines （Group A, 7%-21.5%; Group B, 21%-65%）. The estimation of shear strength at constant volume friction angle and peak shear strength of the glacial sediments with low content of fines was made using published data relating to the measured shear strength characteristics of soils with similar origins and grain size distributions. The estimated values were supported by measurements of the angle of repose taken from fourteen samples from two moraines and by shear tests on samples from one locality. The results of the grain size distribution werealso used to estimate the average hydraulic conductivity using the empirical Hazen formula which results were verified by field infiltration tests at two localities.  相似文献   

3.
To accurately characterize the shear wave speed dispersion of seafloor sediments in the northern South China Sea,five types of sediments including silty clay,clayey silt,sandy silt,silty sand,and clayey sand were selected,on which the measurements of the shear wave speed at 0.5-2.0 kHz and related physical properties were performed.Results reveal that the shear wave speed of sediments increases as the frequency increases,and the dispersion enhanced in the sediments in the order of silty clay,clayey silt,sandy silt,silty sand,and clayey sand,at a linear change rate of 0.727,0.787,3.32,4.893,and 6.967 m s?1 kHz?1,respectively.Through regression analysis,linear and logarithmic regression equations for the correlation between shear wave speed and frequency were established for each sediment type and the determination coefficients of regression equations indicate that the correlation is closer to a logarithmic relationship.The Grain-Shearing(GS)and Biot-Stoll models were used to calculate the shear wave speed dispersion of the five sediment types,and the comparison between theoretical prediction and measured results of shear wave speeds shows that the GS model can more accurately describe the shear wave speed dispersion characteristics of these sediments in the frequency band of 0.5-2.0 kHz.In the same band,the predictions obtained by using the Biot-Stoll model are significantly different from the measured data.  相似文献   

4.
Because the sound speeds of seawater and seafloor sediment both increase with temperature,the influence of tempera-ture on the bottom reflection characteristics of seafloor sediments needs to be investigated.Based on the calculation of the temperature-controlled experimental measurement data of typical seafloor surface sediment samples,the temperature-dependent acoustic characteristics,including acoustic impedance,acoustic impedance ratio between surface sediment and seawater,and reflection coefficient,were analyzed.The effective density fluid model was used to analyze and explain the reflection coefficient variation of surface sediments with temperature and predict the dispersion characteristics.Results show that the acoustic impedance of the seabed sediment increases with temperature,whereas the acoustic impedance ratio and acoustic reflection coefficient slightly decrease.The acoustic impedance,acoustic impedance ratio,and acoustic reflection coefficient of sandy,silty,and clayey sediments vary similarly with tem-perature variation.Moreover,the influence of temperature on these acoustic characteristics is independent of detection frequencies.  相似文献   

5.
通过对滨州近海海域海底沉积物测试数据及海岸带陆域土壤地球化学分析,对滨州海岸带陆域土壤和海底沉积物中7种重金属(Hg,Cd,Pb,Cu,Zn,Cr,Ni)的空间分布特征进行了研究,并绘制了各指标含量陆海联合分区图。分析结果表明,滨州市海岸带重金属元素含量基本上均低于国标规定的海洋一类沉积物的最高标准,仅有个别元素含量超过一级标准值,表明局部存在一定的重金属污染。从滨州海岸带重金属含量空间分布上来看,除Hg元素外,其余重金属元素含量呈现一定的规律,基本上陆域含量高于海域含量,且大部分元素都呈现出陆域城镇值高,郊区值低的态势。区内化工企业较发达,Ni,Cr属于中度变异区,Cd,Hg,Pb属于高度变异,受人为影响因素较大,考虑区内土壤及海底沉积物重金属富集主要来源于工业"三废"。  相似文献   

6.
The Liaodong Shoal is a group of linear sand ridges located in the east Bohai Sea of China.In this study,54 surface sediment samples have been collected,current measurements at 4 stations have been carried out and bathymetric data were obtained.The current directions are rightward deflected relative to the strikes of the sand ridges.Affected by the narrowing effect of the ridge,the current velocities exhibited an anti-‘C’type vertical profile.The velocities of the lower currents linearly correlate with the water depths.The near-bed current velocities over the troughs are estimated to be higher than those over the ridges,and this feature could be explained by the loss of kinetic energy together with the conversion between kinetic energy and gravitational potential energy.The sedimentary characteristics that are compatible with the tidal dynamics are developed across the ridges and troughs,including grain size compositions,grain size parameters,mineral compositions and Dhm indexes.The existence of the angles between the current directions and the strikes of the sand ridges is the key factor for the growth of the sand ridges.The asymmetric hydrodynamic features between the flood and ebb currents lead to the differences in the topographical and sedimentary characteristics on both sides of a sand ridge.Insufficient material supply led to the degradation of the sand ridges,and the reduction of the tidal current intensity has led to the development of the subordinate sand ridges in the troughs.Sand ridges are migrating.  相似文献   

7.
There exist many fluvio-glacial deposits in the valley of Dadu River,Southwest China,which dates back to the Pleistocene.As some of the deposits are located within the seasonal water fluctuation zone of reservoirs,the seepage of groundwater acts as one of the key factors influencing their stability.Investigation into the sediment properties and permeability is,therefore,crucial for evaluating the sediment stability.In this study,in-situ permeability and sieving tests have been carried out to determine grain size distribution,correlations of permeability and hydraulic gradients,and relations between permeability and sedimentation properties.Test results indicate that the deposits are composed mostly of sands,gravels,cobbles and boulders,and the percentage of fines is less than 5%.The sediments have high densities,low porosities and natural moisture contents.At low hydraulic gradients,the seepage velocity obeys the Darcy’s law,while a nonDarcy permeability is observed with hydraulic gradient exceeding a certain value(about 0.5-0.7).The linear permeability coefficient ranges from 0.003 to 0.009 cm/s.Seepage failure occurs above a threshold between 1.1 and 1.5.The test data fit well with the non-linear permeability equations suggested by Forchheimer and Izbash.The non-Darcy permeability proves to be in accordance with the seepage equation suggested by Izbash with the power ’m’ of about 0.6-0.7.The characteristic grain sizes of the studied deposits are found in a narrow range between 0.024 and 0.031 mm,which is much lower than the effective grain size(d 10).  相似文献   

8.
针对圆走航定位声速剖面测量不准确引起水下控制点坐标解算存在偏差的问题,首先介绍了声速不确定性对测距误差的影响,并将声速测距误差分成背景声速剖面误差、随机误差、测距误差长周期项和测距误差短周期项,再通过分析坐标改正数方程得到不同声速测距误差项对控制点坐标定位的影响。最后,设计2组仿真实验对该理论进行验证,实验结果与理论推导的结论一致。  相似文献   

9.
Tests of new in-situ seabed acoustic measurement system in Qingdao   总被引：1，自引：0，他引：1  
A new in-situ seabed acoustic measurement system is developed for direct in-situ measurement of sediment geoacoustic properties （compressional wave velocity and attenuation）. The new in-situ system consists of two parts： the deck control unit and the underwater measurement unit. The underwater measurement unit emits sonic waves that propagate through the seafloor sediment, receives the returning signals, and transmits them to the deck control unit for waveform display and analysis. The entire operation is controlled and monitored in real time by the deck control unit on the research vessel and can provide recording of full waveforms to determine the sound velocity and attenuation. This paper outlines the design of the system, the measurement process, and demonstrates its application in tests carded out on seabed sediment off the Qingdao coast, China. The test results show that the system performed well and rapidly provided accurate in-situ acoustic velocity and attenuation estimates of the seafloor sediment.  相似文献   

10.
Modeling sediment transport depends on several parameters, such as suspended sediment concentration (SSC), shear stress, and settling velocity. To assess the ability of Pulse-Coherent Acoustic Doppler Profiling (PC-ADP) to non-intrusively quantify spatial and temporal SSC and settling velocity at seabed, a field experiment was conducted in the Beibu Gulf (Tonkin Gulf), in the South China Sea. The spatial profiles and temporal variations in SSC at 1 m above bottom were derived from PC-ADP acoustic backscatter intensity determinations after being calibrated with the optical backscatter sensor (OBS) measurements at the same elevation. The PC-ADP and OBS results agreed well. The temporal settling velocity obtained from Rouse profiles agreed well with the Soulsby formula based on size information by LISST (laser in situ scattering and transmissometry). Tides and tidal currents are diurnal in the gulf. SSC increased with increasing ebb and flood flow, and it rapidly decreased with the increase of distance from the seabed. The maximum SSC at 0.16 m and 1.3 m above bottom reached 816 mg/L and 490 mg/L during spring tides, respectively. The sediments consisted of mineral particles 23-162 μm in diameter and 0.05-2.04 cm/s in settling velocity. Generally, both the SSC and settling velocity followed variations in the bottom friction. Results suggest that PC-ADP is able to provide reasonable SSC and settling velocity measurements of both profiles and time series for a long study period.  相似文献   

11.
We used the X-ray diffraction method to determine systematically the mineral phases in bulk sediment samples and acid undissolved residuals of the fine-grained fraction of the surface sediments from the 49.6°E hydrothermal field at the Southwest Indian Ridge(SWIR)and discussed the mineral sources of the surface sediments.The results showed that the surface sediments in this region were composed of calcareous ooze,and calcite was the dominant mineral.The sediments also contained quartz,feldspar,clay minerals,pyroxene,sphalerite,barite,serpentine,and magnetite.The quartz,feldspar,and clay minerals were exogenous minerals that mainly originated from the Namib and Kalahari deserts in southern Africa.The pyroxene,serpentine,magnetite,sphalerite,calcite,and barite were endogenous minerals from weathering of seafloor basement rocks and seafloor hydrothermal activities.The sulfide particles in the sediments were mainly deposited from upwelling plumes.  相似文献   

12.
Forty-eight surface sediments of the southern Yellow Sea are separated into three grain-size fractions. Four forms of extractable nitrogen (nitrogen in ion-exchangeable form (Nie), nitrogen in weak-acid extractable form (Nwa), nitrogen in strong-alkali extractable form (Nsa) and nitrogen in strong-oxidant form (N50))are obtained by the sequential extraction. The results show that the contents and the distributions of the extractable nitrogen in the southern Yellow Sea surface sediments are closely related to sediment grain size. The distributions ofNie, Nso and total nitrogen (TN) present positive correlations with fine particles content, while Nwa and Nsa does not have such correlation. The net contents of all the forms of nitrogen increase with sediment grain size finer.  相似文献   

13.
As a very important component of a coastal system,tidal flats come to be a focus of the studies on land-ocean interaction in the coastal zone because those areas are subjected to intense human activities and are highly sensitive to the global change.The Quanzhou Bay,located along the middle part of Fujian coast of China,covers about 136.4km2,and the area of coastal wetland in the entire bay from intertidal to subtidal with 6m of water depth accounts for 96% of the total area.Seven short cores were collected and divided in situ with the interval of 5cm on the coastal wetlands of Quanzhou Bay on April 19,2006.The sediment samples were scattered and the grain sizes were measured by using Mastersizer 2000.Human beings' activities on tidal flat have disturbed the vertical distribution of sediments in stratigraphic sequence and accelerated the sedimentation rates.Grain size analysis results show that the grain size diameters increase and sediment becomes worse sorted towards the sea under the strong human disturbance;Spartina alterniflora can play a role of trapping the fine sediment;but near the bank,the sediment becomes coarse and there are two peak values on frequency curve influenced by the sandpile.The trough formed by human activities along the coastline changes the transport path of water and suspended sediment.The sediments are transported through the trough and deposit in it during the flood;the ebb flow is retarded by the flow output through the adjacent trough,and the deposited sediment can not be re-suspended;then,the sedimentation rate increases.In situ observation show that the sedimentation rate is about 8-10cm/yr.  相似文献   

14.
A sound speed profile plays an important role in shallow water sound propagation. Concurrent with in-situ measurements, many inversion methods, such as matched-field inversion, have been put forward to invert the sound speed profile from acoustic signals. However, the time cost of matched-field inversion may be very high in replica field calculations. We studied the feasibility and robustness of an acoustic tomography scheme with matched-field processing in shallow water, and described the sound speed profile by empirical orthogonal functions. We analyzed the acoustic signals from a vertical line array in ASIAEX2001 in the East China Sea to invert sound speed profiles with estimated empirical orthogonal functions and a parallel genetic algorithm to speed up the inversion. The results show that the inverted sound speed profiles are in good agreement with conductivity-temperature-depth measurements. Moreover, a posteriori probability analysis is carried out to verify the inversion results.  相似文献   

15.
Four short cores were obtained from the coastal wetland of the Quanzhou Bay, Fujian Province, China, and sediment samples were analyzed with a Mastersizer 2000 for grain size analysis and an Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) for trace metal analysis. The results of grain size analysis show that the wetland sediments are mainly composed of silt and clay, and the distribution of median grain size is affected by human activities obviously. The results of trace metal analysis show that the wetland sediments mainly originate from terrestrial materials in the Luoyangjiang River estuary and from contaminants discharged from adjacent rivers in Shuitou area. The heavy metal contamination in Luoyangjiang estuary decreased from 1984 to 2004 due to industry transformation, but has increased since 2004 because of the discharge of contaminants to the Jinjiang River and much living sewerage to the bay, and a large number of trace metals are trapped within Spartina alterniflora marsh.  相似文献   

16.
Jin  Jiapeng  Wang  Xiujuan  He  Min  Li  Jie  Yan  Chengzhi  Li  Yuanping  Zhou  Jilin  Qian  Jin 《中国海洋湖沼学报》2020,38(4):1188-1200
New acquired and reprocessed three-dimensional(3 D) seismic data were used to delineate the distribution and characterization of bottom simulating reflections(B SRs) in the Chaoshan Sag,in the eastern part of Dongsha Island,South China Sea.Three submarine canyons with different scales were interpreted from the 3 D seismic data,displaying three stages of canyon development and are related with the variation of BSR.Abundant faults were identified from the coherence and ant-tracing attributions extracted from3 D seismic data,which provide the evidence for fluid migration from deeper sediments to the gas hydrate stability zone(GHSZ).The uplift of Dongsha Island created a large number of faults and leads to the increased seafloor erosion.The erosion caused the cooling of the seafloor sediments and deepening of the base of the gas hydrate stability zone,which is attributed to the presence of paleo-BSR and BSR downward shift in the study area.Hence,methane gas may be released during the BSR resetting and gas hydrate dissociation related with seafloor ero sion.  相似文献   

17.
Analysis of Zn, Cu, Pb, Co, Cr, Li, Ni, K, Al, Fe extracted by 1 mol/L HCl or 0.5 mol/LHCl/H_2O_2, showed concentrations of Zn, Cu, Pb, Co, Cr, Fe, Ni were significantly correlated with Li, Al,K, and clay. Two methods are used to indicate the background value of the non-residual phase of elementsin sediments, and are the same as the methods used to indicate the background value of totalconcentrations in sediments. The first method uses correlograms and regression equations,the second usesthe mean element concentrations normalized with grain size. Li, Al, K can be used as reference elements to determine the background value of Zn, Cu, Pb, Co,Cr, Ni, Fe, while the clay concentration's correlation with some extractable concentrations can be used tocalculate the background value of the non-residual phase of elements as a percentage of clay concentrationin the sediments. Based on this study, the concept of using the background value of the non-residualphase of elements to compare the pollution level in differ  相似文献   

18.
We measured the organic content and sinking velocities of biodeposits from two scallop species (Chlamys farreri, Patinopecten yessoensis) and abalone (Haliotis discus hannai) that were cultured on suspended long-lines. Measurements were conducted every two months from April 2010 to February 2011. The shellfish were divided into three size groups (small, middle, and big sizes). At each sample point, we assessed biodeposit organic content, average sinking velocity, the frequency distribution of sinking velocities, and the correlation between organic content and sinking velocity. The organic content of biodeposits varied significantly among months (P<0.05) and the pattern of change varied among species. Sinking velocities varied significantly, ranging from <0.5 cm/s to >1.9 cm/s. The sinking velocities of biodeposits from C. farreri and P. yessoensis were 0.5–1.5 cm/s and from H. discus hannai were <0.7 cm/s. The organic content was significantly negatively correlated to the sinking velocity of biodeposits in C. farreri (P<0.001) and P. yessoensis (P<0.05).  相似文献   

19.
Beam dams are a highly effective and commonly used open-type check dam in debris-flow hazard mitigation. In this study, dimensional analysis was used to obtain empirical equations for quantitatively determining the sediment-trapping and flow-regulating characteristics of a beam dam. To determine the coefficients of the empirical equations, flume experiments were conducted to simulate the trapping and regulating processes. The flow pattern, trapping, and regulating characteristics were investigated when debris flows passed through a beam dam. Debris-flow bulk density and peak discharge, and sediment-trapping ratios, were measured directly and indirectly. The results showed that three blocking actions occurred, and that blockage-breaking considerably influenced the trapping and regulating performance of the beam dam. The relative opening size and the sediment concentration were the two main factors affecting the performance of the beam dam. The ratio of trapping sediment decreased with relative opening, and increased with sediment concentration as well as reducing ratio of bulk density and reducing ratio of peak discharge. The sediment concentration and relative opening were the leading factors influencing the trapping and regulating sediment of a beam dam, followed by flume gradient. The results showed that the calculated values obtained using empirical equations were in good agreement with the values derived from the experiments, and that the deviation was acceptable. Finally, taking Zechawa Gully as an example, using the empirical equations we designed the opening size of a beam dam aimed to trap sediment and regulate peak discharge of debris flow in the main gully.  相似文献   

20.
Clay minerals of surface sediments in the South China Sea (SCS) are analyzed with X-ray diffraction, and their transport is explored with a grain size trend analysis (GSTA) model. Results show that clay mineral types in various sedimentary environments have different sediment sources and transport routes. Sediments in the northern SCS (north of 20°N) between the southwest of Taiwan Island and the outer mouth of the Pearl River have high contents of illite and chlorite, which are derived mainly from sediments on Taiwan Island and/or the Yangtze River. Sediments from the Pearl River are characterized by high kaolinite and low smectite content, and most are distributed in the area between the mouth of the Pearl River and northeast of Hainan Island and transported vertically from the continental shelf to the slope. Characterized by high illite content, sediments from Kalimantan Island are transported toward the Nansha Trough. Sediments from Luzon Island are related with volcanic materials, and are transported westwards according to smectite distribution. On the Sunda Shelf, sediments from the Mekong River are transported southeast in the north while sediments from the Indonesian islands are transported northward in the south. Ascertaining surface sediment sources and their transport routes will not only improve understanding of modern transportation and depositional processes, but also aid paleoenvironmental and paleoclimatic analysis of the SCS.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号