共查询到20条相似文献，搜索用时 203 毫秒
1.
通过融合Gassmann方程和由微分等效介质理论建立的干岩石骨架模型--DEM解析模型,本文提出根据纵波(和横波)速度反演岩石等效孔隙纵横比进行储层孔隙结构评价和横波速度预测的方法.首先,利用Gassmann方程和DEM解析模型建立岩石的纵、横波速度与密度、孔隙度、饱和度和矿物组分等各参数之间的关系;其次,将岩石孔隙等效为具有单一纵横比的理想椭球孔,应用非线性全局寻优算法来寻找最佳的等效孔隙纵横比使得理论预测与实际测量的弹性模量之间的误差最小;最后,将反演得到的等效孔隙纵横比代入到Gassmann方程和DEM解析模型中构建横波速度.实验室和井孔测量数据应用表明,反演得到的等效孔隙纵横比可准确反映储层的孔隙结构,对于裂缝型储层如花岗岩,其孔隙纵横比通常小于0.025,而对于孔隙型储层如砂岩,其孔隙纵横比通常大于0.08.只利用纵波与同时利用纵、横波反演得到的孔隙纵横比结果几乎完全一致,而且由纵波构建的横波与实测横波吻合良好,说明本文提出的等效孔隙纵横比反演及其横波速度预测方法是有效的. 相似文献
2.
3.
Understanding the effects of in situ fluid content and fracture parameters on seismic characteristics is important for the subsurface exploration and production of fractured porous rocks. The ratio of normal-to-shear fracture compliance is typically utilized as a fluid indicator to evaluate anisotropy and identify fluids filling the fractures, but it represents an underdetermined problem because this fluid indicator varies as a function of both fracture geometry and fluid content. On the bases of anisotropic Gassmann's equation and linear-slip model, we suggest an anisotropic poroelasticity model for fractured porous reservoirs. By combining a perturbed stiffness matrix and asymptotic ray theory, we then construct a direct relationship between the PP-wave reflection coefficients and characteristic parameters of fluids(P-and S-wave moduli) and fractures(fracture quasi-weaknesses), thereby decoupling the effects of fluid and fracture properties on seismic reflection characterization.By incorporating fracture quasi-weakness parameters, we propose a novel parameterization method for elastic impedance variation with offset and azimuth(EIVOA). By incorporating wide-azimuth observable seismic reflection data with regularization constraints, we utilize Bayesian seismic inversion to estimate the fluid content and fracture parameters of fractured porous rocks. Tests on synthetic and real data demonstrate that fluid and fracture properties can be reasonably estimated directly from azimuthal seismic data and the proposed approach provides a reliable method for fluid identification and fracture characterization in a gas-saturated fractured porous reservoir. 相似文献
4.
含裂缝多孔介质渗透率预测是非常规油气资源勘探开发的一个紧迫问题.现有多孔介质岩石物理模型通常利用圆形孔管模拟宏观岩石孔隙空间,难以定量描述软孔隙/裂缝在压力作用下的闭合情况,缺乏裂缝/孔隙间流量交换的连通机制.本文提出含三维裂缝/软孔隙网络多孔介质模型,将储层岩石裂缝/软孔隙表示为椭圆截面微管,建立了周期性压力作用下微观裂缝流量表达式,通过网络模型和流量守恒条件,得到含有三维裂缝/软孔隙网络的多孔介质渗透率计算方法.数值算例表明,预测结果与实验数据分布范围吻合很好,能够给出不同类型岩心对应孔隙纵横比的分布图.三维裂缝/软孔隙网络模型建立了宏观可观测量与裂缝参数之间关系,能够定量分析岩石渗透率随裂缝体密度、纵横比、孔隙流体类型和围压等因素的变化规律,为复杂条件下储层渗透率预测提供了一种有效方法. 相似文献
5.
Wyllie's time-average equation and subsequent refinements have been used for over 20 years to estimate the porosity of reservoir rocks from compressional (P)-wave velocity (or its reciprocal, transit time) recorded on a sonic log. This model, while simple, needs to be more convincingly explained in theory and improved in practice, particularly by making use of shear (S)-wave velocity. One of the most important, although often ignored, factors affecting elastic velocities in a rock is pore structure, which is also a controlling factor for transport properties of a rock. Now that S-wave information can be obtained from the sonic log, it may be used with P-waves to provide a better understanding of pore structure. A new acoustic velocities-to-porosity transform based on an elastic velocity model developed by Kuster and Toksöz is proposed. Employing an approximation to an equivalent pore aspect ratio spectrum, pore structure for reservoir rocks is taken into account, in addition to total pore volume. Equidimensional pores are approximated by spheres and rounded spheroids, while grain boundary pores and flat pores are approximated by low aspect ratio cracks. An equivalent pore aspect ratio spectrum is characterized by a power function which is determined by compressional-and shear-wave velocities, as well as by matrix and inclusion properties. As a result of this more sophisticated elastic model of porous rocks and a stricter theory of elastic wave propagation, the new method leads to a more satisfactory interpretation and fuller use of seismic and sonic log data. Calculations using the new transform on data for sedimentary rocks, obtained from published literature and laboratory measurements, are presented and compared at atmospheric pressure with those estimated from the time-average equation. Results demonstrate that, to compensate for additional complexity, the new method provides more detailed information on pore volume and pore structure of reservoir rocks. Examples are presented using a realistic self-consistent averaging scheme to consider interactions between pores, and the possibility of extending the method to complex lithologies and shaly rocks is discussed. 相似文献
6.
致密砂岩气藏具有裂缝发育和有效应力高的特征,研究不同有效压力下孔、裂隙介质地震波传播特征,有利于地震解释与地下储层的识别.但是前人的研究较少考虑岩石内部微观孔隙结构特征与孔隙、裂隙间流体流动的关系.本文首先通过选取四川盆地典型致密砂岩岩样,在不同有效压力下对岩石样本进行超声波实验测量.然后基于实验测得的纵、横波速度进行裂隙参数反演,得到不同有效压力下致密砂岩样本的裂隙孔隙度.再将裂隙孔隙度和样本岩石物理参数代入双重孔隙介质模型,模拟得到不同有效压力下饱水致密砂岩样本纵横波速度频散和衰减的变化规律.结果表明模型预测的速度频散曲线与纵波速度实验测量结果能够较好的吻合.最后统计分析了致密砂岩裂隙参数,得到了致密砂岩储层裂隙参数随有效压力及孔隙度变化特征.依据实际岩石物理参数建立模型,其裂隙参数三维拟合结果能够较好描述致密砂岩裂隙结构与孔隙度、应力的关联,可为实际地震勘探中预测储层裂缝性质提供基础依据. 相似文献
7.
Boris Gurevich 《Geophysical Prospecting》2015,63(1):141-150
Naturally fractured reservoirs are becoming increasingly important for oil and gas exploration in many areas of the world. Because fractures may control the permeability of a reservoir, it is important to be able to find and characterize fractured zones. In fractured reservoirs, the wave‐induced fluid flow between pores and fractures can cause significant dispersion and attenuation of seismic waves. For waves propagating normal to the fractures, this effect has been quantified in earlier studies. Here we extend normal incidence results to oblique incidence using known expressions for the stiffness tensors in the low‐ and high‐frequency limits. This allows us to quantify frequency‐dependent anisotropy due to the wave‐induced flow between pores and fractures and gives a simple recipe for computing phase velocities and attenuation factors of quasi‐P and SV waves as functions of frequency and angle. These frequency and angle dependencies are concisely expressed through dimensionless velocity anisotropy and attenuation anisotropy parameters. It is found that, although at low frequencies, the medium is close to elliptical (which is to be expected as a dry medium containing a distribution of penny‐shaped cracks is known to be close to elliptical); at high frequencies, the coupling between P‐wave and SV‐wave results in anisotropy due to the non‐vanishing excess tangential compliance. 相似文献
8.
Seismic amplitude variation with offset and azimuth (AVOaz) inversion is well known as a popular and pragmatic tool utilized to estimate fracture parameters. A single set of vertical fractures aligned along a preferred horizontal direction embedded in a horizontally layered medium can be considered as an effective long-wavelength orthorhombic medium. Estimation of Thomsen’s weak-anisotropy (WA) parameters and fracture weaknesses plays an important role in characterizing the orthorhombic anisotropy in a weakly anisotropic medium. Our goal is to demonstrate an orthorhombic anisotropic AVOaz inversion approach to describe the orthorhombic anisotropy utilizing the observable wide-azimuth seismic reflection data in a fractured reservoir with the assumption of orthorhombic symmetry. Combining Thomsen’s WA theory and linear-slip model, we first derive a perturbation in stiffness matrix of a weakly anisotropic medium with orthorhombic symmetry under the assumption of small WA parameters and fracture weaknesses. Using the perturbation matrix and scattering function, we then derive an expression for linearized PP-wave reflection coefficient in terms of P- and S-wave moduli, density, Thomsen’s WA parameters, and fracture weaknesses in such an orthorhombic medium, which avoids the complicated nonlinear relationship between the orthorhombic anisotropy and azimuthal seismic reflection data. Incorporating azimuthal seismic data and Bayesian inversion theory, the maximum a posteriori solutions of Thomsen’s WA parameters and fracture weaknesses in a weakly anisotropic medium with orthorhombic symmetry are reasonably estimated with the constraints of Cauchy a priori probability distribution and smooth initial models of model parameters to enhance the inversion resolution and the nonlinear iteratively reweighted least squares strategy. The synthetic examples containing a moderate noise demonstrate the feasibility of the derived orthorhombic anisotropic AVOaz inversion method, and the real data illustrate the inversion stabilities of orthorhombic anisotropy in a fractured reservoir. 相似文献
9.
油气勘探实践表明, 裂缝是油气的储存空间或运移通道, 裂缝介质地震波场的研究越来越受到关注. 实际地层中裂缝形成受多种因素控制, 物理属性比较复杂, 表现出强烈的各向异性. 由于上覆地层的压力使得水平或低陡倾角裂缝存在较少, 大多数为高陡倾角裂缝, 利用线性滑动裂缝介质的等效理论将高陡倾角裂缝介质等效为横向各向同性介质, 便于实际应用. 本文采用各向异性弹性波旋转交错网格模拟方法对含裂缝介质单炮记录进行模拟与分析. 结果表明: 裂缝的存在相当于人为增加反射界面; 裂缝密度越大, 裂缝纵横比越小, 裂缝充填物与背景介质弹性性质差别越大, 引起的反射波能量变化越大. 本文模拟结果为利用地震数据进行裂缝介质参数反演与储层识别及油气预测提供了依据. 相似文献
10.
根据Chapman理论模型,在各向异性介质(如HTI介质)中,当入射角在0-45。范围内,慢横波会发生较大的衰减和频散,且对流体粘度敏感,而P波和快横波则比较小。对于沿裂隙法向传播的慢横波,其振幅受流体影响很大。因此,在P波响应对流体不敏感的情况下,可利用慢横波来获得裂隙型油气藏的流体信息。本文分析了胜利油田垦71地区三维三分量地震数据,检测出的慢横波振幅和旅行时异常与该区的测井资料十分吻合。分析结果还发现,与含油区相比,含水区会产生更高的横波分裂。在含水区,慢横波振幅会产生明显变化,而在含油区则几乎没有变化。 相似文献
11.
沿裂隙发育的天然气水合物是印度深水盆地细粒沉积物中水合物的重要产出方式,水合物以结核状或脉状充填在高角度裂隙中.天然气水合物主要沿着构造主应力方向生成,由于裂隙的存在,含水合物的沉积物层呈现各向异性.利用孔隙介质中水合物呈均匀分布的速度模型计算的NGHP01-10D井水合物饱和度高达40%,而压力取芯表明水合物饱和度占孔隙空间的20%左右.为了研究水合物饱和度差异,基于层状介质的各向异性模型计算了裂隙充填型水合物的饱和度.在垂直井孔中,由于波入射角与裂隙倾角有关,考虑裂隙倾角变化,利用纵波和横波速度同时反演水合物饱和度和裂隙倾角.利用层状介质模型计算的水合物占孔隙空间的15%～25%,裂隙的倾角在60°～90°,多为高角度裂隙.在NGHP01-10D井中,纵横波速度联合计算的饱和度与压力取芯结果吻合更好. 相似文献
12.
Fluid identification in fractured reservoirs is a challenging issue and has drawn increasing attentions. As aligned fractures in subsurface formations can induce anisotropy, we must choose parameters independent with azimuths to characterize fractures and fluid effects such as anisotropy parameters for fractured reservoirs. Anisotropy is often frequency dependent due to wave-induced fluid flow between pores and fractures. This property is conducive for identifying fluid type using azimuthal seismic data in fractured reservoirs. Through the numerical simulation based on Chapman model, we choose the P-wave anisotropy parameter dispersion gradient (PADG) as the new fluid factor. PADG is dependent both on average fracture radius and fluid type but independent on azimuths. When the aligned fractures in the reservoir are meter-scaled, gas-bearing layer could be accurately identified using PADG attribute. The reflection coefficient formula for horizontal transverse isotropy media by Rüger is reformulated and simplified according to frequency and the target function for inverting PADG based on frequency-dependent amplitude versus azimuth is derived. A spectral decomposition method combining Orthogonal Matching Pursuit and Wigner–Ville distribution is used to prepare the frequency-division data. Through application to synthetic data and real seismic data, the results suggest that the method is useful for gas identification in reservoirs with meter-scaled fractures using high-qualified seismic data. 相似文献
13.
为研究裂缝、裂隙介质中波致流引起的衰减,将裂缝看作背景孔隙岩石中非常薄且孔隙度非常高的层状介质,并等价成White周期层状模型.分别考虑不同类型的裂隙和孔隙之间的挤喷流影响,结合改进的Biot方程,推导得到裂缝裂隙介质的刚度与频率的关系.当缝隙中饱含流体时,介质的衰减和速度频散受裂缝、孔隙之间和裂隙、孔隙之间流体流动的显著影响.在低频极限下,裂缝裂隙介质的性质由各向异性Gassmann理论和挤喷流模型获得;而在非常高的频率时,由于缝隙中的压力来不及达到平衡,波致流的影响可忽略.分析表明,裂隙密度主要影响波的衰减,而裂隙纵横比主要控制优势衰减频率和速度显著变化的频率范围;由于不同裂隙的衰减机制不同,衰减和速度频散大小有所差异,但基本趋势相同. 相似文献
14.
储层砂岩微观孔隙结构特征不仅影响干燥岩石的弹性波传播速度,也决定了岩石介质中与流体流动相关的速度频散与衰减作用.依据储层砂岩微观结构特征及速度随有效压力变化的非线性特征,将其孔隙体系理想化为不同形状的硬孔隙(纵横比α0.01)与软孔隙(纵横比α0.01)的组合(双孔隙结构).基于孔弹性理论,给出软孔隙最小初始纵横比值(一定压力下所有未闭合软孔隙在零压力时的纵横比最小值)的解析表达式,并在此基础上利用岩石速度-压力实验观测结果给出求取介质中两类孔隙纵横比及其含量分布特征的方法.通过逐步迭代加入软孔隙的方法对基于特征纵横比的"喷射流"(squirt fluid)模型进行了扩展,以考虑复杂孔隙分布特征对岩石喷射流作用的影响及其可能引起的速度频散特征.相较于典型的喷射流作用速度频散模式,对于岩石中软孔隙纵横比及其对应含量在较宽的范围呈谱分布的一般情况,其速度频散曲线不存在明显的低频段和中间频段,速度随频率的增大呈递增趋势直至高频极限.这说明即使在地震频段,微观尺度下的喷射流作用仍起一定作用,同样会造成流体饱和岩石介质的地震速度与Gassmann方程预测结果有不可忽略的差异.本文是对现有喷射流模型的重要补充,也为利用实验数据建立不同频段间岩石弹性波传播速度的可能联系提供了理论依据. 相似文献
15.
Frequency-dependent amplitude variation with offset offers an effective method for hydrocarbon detections and analysis of fluid flow during production of oil and natural gas within a fractured reservoir. An appropriate representation for the frequency dependency of seismic amplitude variation with offset signatures should incorporate influences of dispersive and attenuating properties of a reservoir and the layered structure for either isotropic or anisotropic dispersion analysis. In this study, we use an equivalent medium permeated with aligned fractures that simulates frequency-dependent anisotropy, which is sensitive to the filled fluid of fractures. The model, where pores and fractures are filled with two different fluids, considers velocity dispersion and attenuation due to mesoscopic wave-induced fluid flow. We have introduced an improved scheme seamlessly linking rock physics modelling and calculations for frequency-dependent reflection coefficients based on the propagator matrix technique. The modelling scheme is performed in the frequency-slowness domain and can properly incorporate effects of both bedded structure of the reservoir and velocity dispersion quantified with frequency-dependent stiffness. Therefore, for a dispersive and attenuated layered model, seismic signatures represent a combined contribution of impedance contrast, layer thickness, anisotropic dispersion of the fractured media and tuning and interference of thin layers, which has been avoided by current conventional methods. Frequency-dependent amplitude variation with offset responses was studied via considering the influences of fracture fills, layer thicknesses and fracture weaknesses for three classes amplitude variation with offset reservoirs. Modelling results show the applicability of the introduced procedure for interpretations of frequency-dependent seismic anomalies associated with both layered structure and velocity dispersion of an equivalent anisotropic medium. The implications indicate that anisotropic velocity dispersion should be incorporated accurately to obtain enhanced amplitude variation with offset interpretations. The presented frequency-dependent amplitude variation with offset modelling procedure offers a useful tool for fracture fluid detections in an anisotropic dispersive reservoir with layered structures. 相似文献
16.
Azimuthal amplitude variation in fractured media, commonly used to characterize fracture systems, is a function not only of reflection at the target but also of transmission through the overburden. This study investigates the sensitivity of amplitudes to various anisotropic overburden effects in horizontal transverse isotropic (HTI) media. Issues considered here are geometric spreading, transmission coefficients and attenuation due to fluid flow. Their influence on the azimuthal amplitude variation is evaluated quantitatively over a wide model space.
Only the variation of transmission coefficients with azimuth proves to be negligible. Geometric spreading alters the amplitude signature significantly over a relatively narrow range of models, and its influence increases with layer thickness. The most severe effect of an anisotropic fractured overburden is attenuation due to fluid flow between the cracks or the cracks and pores in the surrounding matrix. The relative changes in amplitudes between the symmetry directions due to anisotropic absorption are of the same order of magnitude as the changes in the reflection coefficient. The effect is significant over a very wide range of petrophysical parameters. Thus it leads to considerable problems in the amplitude analysis for almost any case of an overburden that contains cracks and pores. A correct amplitude analysis at the target will not be possible unless the effect of attenuation is removed. 相似文献
Only the variation of transmission coefficients with azimuth proves to be negligible. Geometric spreading alters the amplitude signature significantly over a relatively narrow range of models, and its influence increases with layer thickness. The most severe effect of an anisotropic fractured overburden is attenuation due to fluid flow between the cracks or the cracks and pores in the surrounding matrix. The relative changes in amplitudes between the symmetry directions due to anisotropic absorption are of the same order of magnitude as the changes in the reflection coefficient. The effect is significant over a very wide range of petrophysical parameters. Thus it leads to considerable problems in the amplitude analysis for almost any case of an overburden that contains cracks and pores. A correct amplitude analysis at the target will not be possible unless the effect of attenuation is removed. 相似文献
17.
《中国科学D辑(英文版)》2008,(Z2)
Study on characterizing reservoir parameters dynamic variations by time-lapse seismic attributes is the theoretical basis for effectively distinguishing reservoir parameters variations and conducting time-lapse seismic interpretation,and it is also a key step for time-lapse seismic application in real oil fields. Based on the rock physical model of unconsolidated sandstone,the different effects of oil saturation and effective pressure variations on seismic P-wave and S-wave velocities are calculated and analyzed. Using numerical simulation on decoupled wave equations,the responses of seismic amplitude with different offsets to reservoir oil saturation variations are analyzed,pre-stack time-lapse seismic attributes differences for oil saturation and effective pressure variations of P-P wave and P-S converted wave are calculated,and time-lapse seismic AVO (Amplitude Versus Offset) response rules of P-P wave and P-S converted wave to effective pressure and oil saturation variations are compared. The theoretical modeling study shows that it is feasible to distinguish different reservoir parameters dynamic variations by pre-stack time-lapse seismic information,including pre-stack time-lapse seismic attributes and AVO information,which has great potential in improving time-lapse seismic interpreta-tion precision. It also shows that the time-lapse seismic response mechanism study on objective oil fields is especially important in establishing effective time-lapse seismic data process and interpreta-tion scheme. 相似文献
18.
Azimuthal variation in AVO response for fractured gas sands 总被引：1，自引：0，他引：1
Natural fractures in reservoirs play an important role in determining fluid flow during production, and hence the density and orientation of fractures is of great interest. In the presence of aligned vertical fractures, the reflection amplitude at finite offset varies with azimuth. The effect of natural fractures on the azimuthal AVO response from a gas-sandstone reservoir encased within shale is investigated. A simple expression for the difference in P-wave reflection coefficient from the top of the reservoir parallel and perpendicular to the strike of the fractures is obtained in terms of the normal and tangential compliances, ZN and ZT, of the fractures. This expression is valid for small anisotropy and material contrasts and is compared with the results of numerical modelling. For a given value of ZT, the azimuthal variation in reflection coefficient at moderate offsets is found to increase with decreasing ZN/ZT. For gas-filled open fractures ZN/ZT ≈ 1, but a lower ratio of ZN/ZT may result from the presence of cement or clay within the fractures, or from the presence of a fluid with non-zero bulk modulus. For ZN/ZT = 1 and moderate offsets, the variation with offset of the reflection coefficient from the top of the fractured unit is dominated by the contrast in Poisson's ratio between the gas sand and the overlying shale, the effect of fractures only becoming noticeable as the critical angle for the unfractured sandstone is approached. However, for reflections from the base of the fractured unit, the variation in reflection amplitude with azimuth is much greater at conventional seismic offsets than for the reflection from the top. Azimuthal variations in the strength of the reflection from the top of the reservoir depend only on the variation in reflection coefficient, whereas the raypath is also a function of azimuth for reflections from the base of the fractured unit, leading to stronger, more visible, variations of AVO with azimuth. It follows that an azimuthal variation in AVO due to fractures in the overburden may be misinterpreted as due to the presence of aligned fractures in the reservoir. 相似文献
19.
When a porous layer is permeated by mesoscale fractures, wave-induced fluid flow between pores and fractures can cause significant attenuation and dispersion of velocities and anisotropy parameters in the seismic frequency band. This intrinsic dispersion due to fracturing can create frequency-dependent reflection coefficients in the layered medium. In this study, we derive the frequency-dependent PP and PS reflection coefficients versus incidence angle in the fractured medium. We consider a two-layer vertical transverse isotropy model constituted by an elastic shale layer and an anelastic sand layer. Using Chapman's theory, we introduce the intrinsic dispersion due to fracturing in the sand layer. Based on the series coefficients that control the behaviour of velocity and anisotropy parameters in the fractured medium at low frequencies, we extend the conventional amplitude-versus-offset equations into frequency domain and derive frequency-dependent amplitude-versus-offset equations at the elastic–anelastic surface. Increase in fracture length or fracture density can enlarge the frequency dependence of amplitude-versus-offset attributes of PP and PS waves. Also, the frequency dependence of magnitude and phase angle of PP and PS reflection coefficients increases as fracture length or fracture density increases. Amplitude-versus-offset type of PP and PS reflection varies with fracture parameters and frequency. What is more, fracture length shows little impact on the frequency-dependent critical phase angle, while the frequency dependence of the critical phase angle increases with fracture density. 相似文献
20.
In fractured reservoirs, seismic wave velocity and amplitude depend on frequency and incidence angle. Frequency dependence is believed to be principally caused by the wave‐induced flow of pore fluid at the mesoscopic scale. In recent years, two particular phenomena, i.e., patchy saturation and flow between fractures and pores, have been identified as significant mechanisms of wave‐induced flow. However, these two phenomena are studied separately. Recently, a unified model has been proposed for a porous rock with a set of aligned fractures, with pores and fractures filled with two different fluids. Existing models treat waves propagating perpendicular to the fractures. In this paper, we extend the model to all propagation angles by assuming that the flow direction is perpendicular to the layering plane and is independent of the loading direction. We first consider the limiting cases through poroelastic Backus averaging, and then we obtain the five complex and frequency‐dependent stiffness values of the equivalent transversely isotropic medium as a function of the frequency. The numerical results show that, when the bulk modulus of the fracture‐filling fluid is relatively large, the dispersion and attenuation of P‐waves are mainly caused by fractures, and the values decrease as angles increase, almost vanishing when the incidence angle is 90° (propagation parallel to the fracture plane). While the bulk modulus of fluid in fractures is much smaller than that of matrix pores, the attenuation due to the “partial saturation” mechanism makes the fluid flow from pores into fractures, which is almost independent of the incidence angle. 相似文献