共查询到20条相似文献，搜索用时 62 毫秒
1.
From recent close encounters with Comets Wild-2 and Tempel 1 we learned that their surfaces are very rugged and no simple uniform layers model can be applied to them. Rather, a glaciological approach should be applied for describing their surface features and behavior. Such intrinsically rugged surface is formed in our large scale experiments, where an agglomerate of ∼200 μm gas-laden amorphous ice particles is accumulated to form a 20 cm diameter and few cm high ice sample. The density, tensile strength and thermal inertia of our ice sample were found to be very close to those found by Deep Impact for Comet Tempel 1: density 250-300 kg m−3 vs DI 350-400 kg m−3; tensile strength 2-4 kPa vs DI 1-10 kPa; thermal inertia 80 W K−1 m−2 s1/2 vs <100 W K−1 m−2 s1/2 and <50 W K−1 m−2 s1/2. From the close agreement between the thermal inertias measured in our ice sample, which had no dust coverage and that of Comet Tempel 1, we deduce that the low thermal inertia is an intrinsic property of the fluffy structure of the ice as a result of its low density, with an addition by the broken terrain and not due to the formation of a dust layer. Upon warming up of the ice, water vapor migrates both outward into the coma and inward. Reaching cooler layers, the water vapor condenses, forming a denser ice crust, as we show experimentally. We also demonstrate the inward and outward flow of water vapor in the outer ice layers through the exchange between layers of D2O ice and H2O ice, to form HDO. 相似文献
2.
A fully 3-dimensional implicit numerical model for comet nucleus evolution is presented, emphasizing dust mantle formation. A spherical configuration is considered with an initial composition of amorphous H2O ice and dust, taking into account a discrete dust-grain size distribution. The model is applied to Comet 67P/Churyumov-Gerasimenko, adopting its orbital elements, rotation period and rotation axis inclination. We find that the dust mantle thickness varies over the surface from 1 cm to about 10 cm (thus lower and higher than the diurnal skin-depth, respectively). The size distribution of ejected grains varies along the orbit and is steeper than the initial one adopted for the nucleus. The crystallization front advances inward in spurts, and its depth varies between 1 and several meters. We test the effect of the thermal conductivity on the surface temperature distribution and depths of the dust mantle and crystallization front. 相似文献
3.
Our work was inspired by the recent brightening of Comet 17P/Holmes. The recently observed increase in brightness of this comet was correlated with emission of dust, probably larger in mass than the dust mantle of the nucleus. We analyzed the hypothesis that the comet can eject a large mass of dust due to non-uniform crystallization of amorphous water ice. For this purpose, we simulated the evolution of a model nucleus on the orbit of Comet 17P/Holmes. The nucleus is composed of water ice and dust and has the shape of an elongated ellipsoid. The simulations include crystallization of amorphous ice in the nucleus, changes in the dust mantle thickness, and changes in the nucleus orientation in space. Our computations indicate that: (i) ejection of the dust cover triggers crystallization of ice independently on the material properties of the nucleus; (ii) moderate changes in the nucleus orientation (∼50°) may result in an acceleration of the crystallization of ice in the northern hemisphere, while a rather large change in the orientation (∼120°) is needed to cause a significant jump of the crystallization front in the southern hemisphere, where the emission of dust during the recent brightening was strongest. We investigated the possible reason for an explosion and we have found that the crystallization of the water ice itself is probably not sufficient. 相似文献
4.
We present results on the energy balance of the Deep Impact experiment based on analysis of 180 infrared spectra of the ejecta obtained by the Deep Impact spacecraft. We derive an output energy of 16.5 (+9.1/−4.1) GJ. With an input energy of 19.7 GJ, the error bars are large enough so that there may or may not be a balance between the kinetic energy of the impact and that of outflowing materials. Although possible, no other source of energy other than the impactor or the Sun is needed to explain the observations. Most of the energy (85%) goes into the hot plume in the first few seconds, which only represents a very small fraction (<0.01%) of the total ejected mass. The hot plume contains 190 (+263/−71) kg of H2O, 1.6 ± 0.5 kg of CO2, 8.2 (+11.3/3.1) kg of CO (assuming a CO/H2O ratio of 4.3%), 27.9 (+25.0/−8.9) kg of organic material and 255 ± 128 kg of dust, while the ejecta contains ∼107 kg of materials. About 12% of the energy goes into the ejecta (mostly water) and 3% to destroy the impactor. Volatiles species other than H2O (CO2, CO or organic molecules) contribute to <7% of the energy balance. In terms of physical processes, 68% of the energy is used to accelerate grains (kinetic energy), 16% to heat them, 6% to sublimate or melt them and 10% (upper limit) to break and compress dust and/or water ice aggregates into small micron size particles. For the hot plume, we derive a dust/H2O ratio of 1.3 (+1.9/−1.0), a CO2/H2O ratio of 0.008 (+0.009/−0.006), an organics/H2O ratio of 0.15 (+0.29/−0.11) and an organics/dust ratio of 0.11 (+0.30/−0.07). This composition refers to the impact site and is different from that of the bulk nucleus, consistent with the idea of layers of different composition in the nucleus sub-surface. Our results emphasize the importance of laboratory impact experiments to understand the physical processes involved at such a large scale. 相似文献
5.
We investigated three comets, which are active at large heliocentric distances, using observations obtained at the 6-m BTA telescope (SAO RAS, Russia) in the photometric mode of the focal reducer SCORPIO. The three comets, 29P/Schwassmann-Wachmann 1, C/2003 WT42 (LINEAR), and C/2002 VQ94 (LINEAR), were observed after their perihelion passages at heliocentric distances between 5.5 and 7.08 AU. The dust production rates in terms of Afρ was measured for these comets. Using the retrieved values, an average dust production rate was derived under different model assumptions. A tentative calculation of the total mass loss of the comet nucleus within a certain observation period was executed. We calculated the corresponding thickness of the depleted uppermost layer where high-volatile ices completely sublimated. The results obtained in our study strongly support the idea that the observed activity of Comet SW1 requires a permanent demolition of the upper surface layers. 相似文献
6.
The Deep Impact mission discovered repetitive outbursts on Comet 9P/Tempel 1 and the presence of several smooth terrains on its surface. We present new measurements of the extent of the smooth terrains, the slopes along their centerlines, and the areas of their likely source regions. Our analysis of these features indicates that they are <700 orbits old and probably the result of an ongoing process. The implications of the recently found locations of the source regions of the repetitive outbursts are also analyzed. We propose that the origins of these phenomena are in the different regimes of fluidization and gas transport in a weakly bound particulate mixture of ice and dust above an assumed amorphous/crystalline H2O phase change boundary where CO and/or CO2 gas is released. The depth of this boundary is estimated to lie between 30 and 100 m below the surface. The smooth terrains are visualized as occurring about once every ∼70 orbits at random locations of the nucleus where a spurt in CO production occurs over a limited region of the phase change boundary. The weak (tensile strength ) crystalline and dust overburden is locally ruptured and fluidized by the CO gas pressure and is then extruded onto the surface at speeds of ∼0.003-0.03 m/s, well below the escape velocity of 1.3 m/s. Once on the surface a base pressure of only 2.5 Pa is required to ensure fluidization of the extruded material and it can remain fluidized for typically ∼20 h against diffusive loss of CO. As the material accelerates down the local topography it deflates due to diffusive gas loss. The flow becomes increasingly viscous until it is no longer fluidized at which point it quickly halts forming a terminal scarp. The mean speed of the laminar flow is estimated at 0.3 m/s for an emplacement time of ∼3 h. Topographic features on the flow >0.3 m in size should become fully relaxed during the emplacement time explaining the smooth texture seen in the images. In contrast, the repetitive outbursts require a gas-laden reservoir to have formed in the vicinity of the phase change boundary well below their preferred location. We visualize the outbursts to be the result of either spouting or bubble transport to the surface where the release of gas is diurnally modulated by either thermal stresses or H2O sublimation back pressure. The source region for the i2 smooth terrain is found to coincide with an H2O-ice rich area and we propose that the process of elutriation, i.e., the separation of different classes of particulates depending on their drag properties, occurs in the fluidized material as it flows up to and through the surface. In this way the material becomes enhanced in H2O crystals relative to siliceous and carbonaceous particulates. 相似文献
7.
We present a new 1-dimensional thermal evolution code suited for small icy bodies of the Solar System, based on modern adaptive grid numerical techniques, and suited for multiphase flow through a porous medium. The code is used for evolutionary calculations spanning 4.6×109 yr of a growing body made of ice and rock, starting with a 10 km radius seed and ending with an object 250 km in radius. Initial conditions are chosen to match two different classes of objects: a Kuiper belt object, and Saturn's moon Enceladus. Heating by the decay of 26Al, as well as long-lived radionuclides is taken into account. Several values of the thermal conductivity and accretion laws are tested. We find that in all cases the melting point of ice is reached in a central core. Evaporation and flow of water and vapor gradually remove the water from the core and the final (present) structure is differentiated, with a rocky, highly porous core of 80 km radius (and up to 160 km for very low conductivities). Outside the core, due to refreezing of water and vapor, a compact, ice-rich layer forms, a few tens of km thick (except in the case of very high conductivity). If the ice is initially amorphous, as expected in the Kuiper belt, the amorphous ice is preserved in an outer layer about 20 km thick. We conclude by suggesting various ways in which the code may be extended. 相似文献
8.
Numerical simulations of the evolving activity of comet Hale-Bopp are presented, assuming a porous, spherical nucleus, 20
km in radius, made of dust and gas-laden amorphous ice. The main effects included are: crystallization of amorphous ice and
release of occluded gas, condensation, sublimation and flow of gases through the pores, changing pore sizes, and flow of dust
grains. The model parameters, such as initial pore size and porosity, emissivity, dust grain size, are varied in order to
match the observed activity. In all cases, a sharp rise in the activity of the nucleus occurs at a large heliocentric distance
pre-perihelion, marked by a few orders of magnitude increase in the CO and the CO2 fluxes and in the rate of dust emission. This is due to the onset of crystallization, advancing down to a few meters below
the surface, accompanied by release of the trapped gases. A period of sustained, but variable, activity ensues. The emission
of water molecules is found to surpass that of CO at a heliocentric distance of 3 AU. Thereafter the activity is largely determined
by the behaviour of the dust. If a dust mantle is allowed to build up, the water production rate does not increase dramatically
towards perihelion; if most of the dust is ejected, the surface activity increases rapidly, producing a very bright comet.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
9.
The Trojan asteroids orbit about the Lagrangian points of Jupiter and the residence times about their present location are very long for most of them. If these bodies originated in the outer Solar System, they should be mainly composed of water ice, but, in contrast with comets, all the volatiles close to the surface would have been lost long ago. Irrespective of the rotation period, and hence the surface temperature and ice sublimation rate, a dust layer exists always on the surface. We show that the timescale for resurfacing the entire surface of the Trojan asteroids is similar to that of the flattening of the red spectrum of the new dust by solar-proton irradiation. This, if the cut-off radius of the size distribution of the impacting objects is between 1 mm and 1 m and its slope is −3, for the entire size range. Therefore, the surfaces of most Trojan asteroids should be composed mainly of unirradiated dust. 相似文献
10.
We report high-spectral resolution observations of Comet 9P/Tempel 1 before, during and after the impact on 4 July 2005 UT of the Deep Impact spacecraft with the comet. These observations were obtained with the HIRES instrument on Keck 1. We observed brightening of both the dust and gas, but at different rates. We report the behavior of OH, NH, CN, C3, CH, NH2 and C2 gas. From our observations, we determined a CN outflow velocity of at least 0.51 km s−1. The dust color did not change substantially. To date, we see no new species in our spectra, nor do we see any evidence of prompt emission. From our observations, the interior material released by the impact looks the same as the material released from the surface by ambient cometary activity. However, further processing of the data may uncover subtle differences in the material that is released as well as the time evolution of this material. 相似文献
11.
The gas transport through non-volatile random porous media is investigated numerically. We extend our previous research of the transport of molecules inside the uppermost layer of a cometary surface (
[Skorov and Rickman, 1995] and [Skorov et al., 2001]). We assess the validity of the simplified capillary model and its assumptions to simulate the gas flux trough the porous dust mantle as it has been applied in cometary physics. A microphysical computational model for molecular transport in random porous media formed by packed spheres is presented. The main transport characteristics such as the mean free path distribution and the permeability are calculated for a wide range of model parameters and compared with those obtained by more idealized models. The focus in this comparison is on limitations inherent in the capillary model. Finally a practical way is suggested to adjust the algebraic Clausing formula taking into consideration the nonlinear dependence of permeability on layer porosity. The retrieved dependence allows us to accurately calculate the permeability of layers whose thickness and porosity vary in the range of values expected for the near-surface regions of a cometary nucleus. 相似文献
12.
This work is dedicated to the application to 67P/Churyumov-Gerasimenko of a new quasi-3D approach for non-spherically shaped comet nuclei with the aim to interpret the current activity of the comet in terms of initial characteristics and to predict shape and internal stratification evolution of the nucleus. The model is applied to differently shaped nuclei taking into account the characteristics of Comet 67P/Churyumov-Gerasimenko deduced from observations. We focus our attention on the combined effects that shapes and obliquity have on the comet surface and sub-surface evolution. We discuss the results in terms of activity, local dust mantle formation and disruption, erosion of the surface and internal stratigraphy.The results show that differently shaped nuclei can have different internal structures leading to different activity patterns and behaviors. Our calculations have shown that local variations in the dust and gas fluxes can be induced by the nucleus shape. The distribution of “active” areas on Comet 67P/Churyumov-Gerasimenko is different because of different shapes, reflecting the illumination conditions on the surface. These shapes can influence the structure of the inner coma, but the coma far away from the nucleus is only marginally affected by the nucleus shape. However, different comet behaviors can arise from differently shaped comet nuclei, especially in terms of local activity, surface and sub-surface characteristics and properties. The water flux local distribution is the most influenced by the shape as it is directly linked to the illumination. Irregular shapes have large shadowing effects that can result in activity patterns on the comet surface.The effects of different pole directions are discussed to see the relations with the nucleus activity and internal structure. It is shown that the orientation of the rotation axis plays a strong role on the surface evolution of 67P/Churyumov-Gerasimenko, determining seasonal effects on the fluxes. The activity of the comet changes greatly with the nucleus obliquity leading to pre-post-perihelion differences in the activity and seasonal effects. The effects of the dust deposition and crust formation on the cometary activity have also been simulated and are discussed with respect to 67P/Churyumov-Gerasimenko observations. The dust mantling is also strongly obliquity dependent, with different surface distributions of the dust-covered regions according to the different comet pole orientations. Finally, we show that our model can reproduce the fluxes behavior near perihelion in terms of amplitude and asymmetry, and we estimate 20% of the illuminated surface to be active. 相似文献
13.
《Icarus》1987,72(3):535-554
An analytical model has been developed to simulate the chemical differentiation of a homogeneous, initially unmantled cometary nucleus composed of water ice, putative unclathrated CO2 ice, and silicate dust in specified proportions. Selective sublimation of any free CO2 ice present in a new comet should produce a surface layer of water ice and dust overlying the undifferentiated core. This surface layer modifies the temperature of buried CO2 ice and restricts the outflow of gaseous CO2. On each orbit, water sublimation closer to perihelion temporarily reduces the thickness of the water ice and dust layer and liberates dust. Most of the dust is blown off the nucleus, but a small amount of residual dust remains on the surface (cf. H. L. F. Houpis, W. H. Ip, and D. A. Mendis, 1986, Astrophys. J., in press). Our model includes the effects of nucleus rotation, arbitrary orientation of the rotation axis, latitude, heat conduction into the interior of the nucleus, restriction of CO2 gas outflow by the water ice and dust layer, and the use of thermal conductivities for both amorphous and crystalline water ice as appropriate, featuresthat were not included in the Houpis et al. model. The model also accounts for the erosion of the water ice surface, which Houpis et al. appear to have accounted for and which is an important effect. Specifically, we investigate the effects of varying the permeability of the surface water ice layer, the mass fraction of CO2, the orbit and the latitude, using the orbital parameters of Comets Halley and Tempel 2. It is found that CO2 gas production should exceed H2O gas production beyond ∼3 AU, and at 1 AU CO2 gas production should be between 20 to 25% of H2O gas production. The depth of CO2 ice and the variation in the depth of CO2 ice throughout an orbit are affected significantly by the perihelion of the orbit. The effects due to water ice permeability are significant but much less than expected on the basis of flow area. Latitude and CO2 concentration produce relatively small effects. Under all conditions considered here, CO2 ice should always be found within ∼1 m from the surface of comet nuclei if it is present as a free species to begin with. This result is probably generally valid for unmantled portions of most comets and qualitatively simulates the behavior of an abundant, highly volatile component in an H2O/silicate matrix. Comparison of these and similar results with observations could yield information regarding the permeability and chemical composition of cometary material and suggest sampling strategies to minimize fractionation effects. The method is applicable to other nonwater ices. 相似文献
14.
In the current work we analyze properties of the dust mantle, its thickness and thermal conductivity, necessary to reproduce observed rate of water production of Comet 9P/Tempel 1. For this purpose we considered simplified shape of the comet nucleus approximated by the symmetric prolate ellipsoid with smooth surface. We have performed simulations, using models with dust mantle of the thickness either constant, but nonuniform (Model A), or evolving (Model B). The simulated profiles of water production versus time were compared with observations. In addition, we compared the calculated surface temperature with the real temperatures derived from IR observations (the Deep Impact mission). This new double-stage verification procedure, shows that our model A is a good representation for the nucleus of Comet Tempel 1. This indicates, that the dust mantle thickness should be nonuniform, but does not change significantly with time. We show, that reproducing observed high temperatures of the nucleus requires dust mantle, that is almost everywhere thick and has extremely low thermal inertia. The latter should be close to zero as already predicted by others. The agreement between the simulated and measured water production can be obtained when the dust is regionally thin and has the thermal inertia higher than average, according to our simulations about 100 W s1/2 K−1 m−2. Such regions should be located in the south hemisphere of the nucleus. 相似文献
15.
I describe a new method to make particle layers which consist of SiO2 spheres with 0.78 μm radius. The layers were produced by sedimentation of aggregates which had grown in ballistic particle collisions, and the layers had a porosity of 0.95. They were used for experiments on sintering, i.e., the samples were heated in an oven at varying temperatures and heating durations, and the samples were analyzed by scanning electron microscopy. Based on the change of particle diameter, surface diffusion sintering and viscous flow are identified as important transformation mechanisms. The first effect dominated at the start of restructuring and the latter at higher temperatures. The neck growth of adjacent particles was fitted to a surface diffusion sintering model and predicts neck radii as a heating temperature and duration function. Between the temperature range of neck formation and of melting, further restructuring occurred which lead to dissolution of particulate structure and to densification and which resulted in a porous object consisting of straight elongated substructures which connected kinks of higher material density. The thermal transformation is important for the change of strength, collisional behavior, light-scattering properties, and thermal conductivity with relevance to dust aggregates, planetesimals, comets, interplanetary dust particles, and regolith-covered celestial bodies. 相似文献
16.
Ignacio Ferrín 《Icarus》2006,185(2):523-543
We present the secular light curve (SLC) of 133P/Elst-Pizarro, and show ample and sufficient evidence to conclude that it is evolving into a dormant phase. The SLC provides a great deal of information to characterize the object, the most important being that it exhibits outburst-like activity without a corresponding detectable coma. 133P will return to perihelion in July of 2007 when some of our findings may be corroborated. The most significant findings of this investigation are: (1) We have compiled from 127 literature references, extensive databases of visual colors (37 comets), rotational periods and peak-to-valley amplitudes (64 comets). 2-Dimensional plots are created from these databases, which show that comets do not lie on a linear trend but in well defined areas of these phase spaces. When 133P is plotted in the above diagrams, its location is entirely compatible with those of comets. (2) A positive correlation is found between cometary rotational periods and diameters. One possible interpretation suggest the existence of rotational evolution predicted by several theoretical models. (3) A plot of the historical evolution of cometary nuclei density estimates shows no trend with time, suggesting that perhaps a consensus is being reached. We also find a mean bulk density for comets of 〈ρ〉=0.52±0.06 g/cm3. This value includes the recently determined spacecraft density of Comet 9P/Tempel 1, derived by the Deep Impact team. (4) We have derived values for over 18 physical parameters, listed in the SLC plots, Figs. 6-9. (5) The secular light curve of 133P/Elst-Pizarro exhibits a single outburst starting at +42±4 d (after perihelion), peaking at LAG=+155±10 d, duration 191±11 d, and amplitude 2.3±0.2 mag. These properties are compatible with those of other low activity comets. (6) To explain the large time delay in maximum brightness, LAG, two hypothesis are advanced: (a) the existence of a deep ice layer that the thermal wave has to reach before sublimation is possible, or (b) the existence of a sharp polar active region pointing to the Sun at time = LAG, that may take the form of a polar ice cap, a polar fissure or even a polar crater. The diameter of this zone is calculated at ∼1.8 km. (7) A new time-age is defined and it its found that T-AGE = 80 cy for 133P, a moderately old comet. (8) We propose that the object has its origin in the main belt of asteroids, thus being an asteroid-comet hybrid transition object, an asteroidal belt comet (ABC), proven by its large density. (9) Concerning the final evolutionary state of this object, to be a truly extinct comet the radius must be less than the thermal wave depth, which at 1 AU is ∼250 m (at the perihelion distance of 133P the thermal wave penetrates only ∼130 m). Comets with radius larger than this value cannot become extinct but dormant. Thus we conclude that 133P cannot evolve into a truly extinct comet because it has too large a diameter. Instead it is shown to be entering a dormant phase. (10) We predict the existence of truly extinct comets in the main belt of asteroids (MBA) beginning at absolute magnitude ∼21.5 (diameter smaller than ∼190 m). (11) The object demonstrates that a comet may have an outburst of ∼2.3 mag, and not show any detectable coma. (12) Departure from a photometric R+2 law is a more sensitive method (by a factor of 10) to detect activity than star profile fitting or spectroscopy. (13) Sufficient evidence is presented to conclude that 133P is the first member of a new class of objects, an old asteroidal belt comet, ABC, entering a dormant phase. 相似文献
17.
An investigation of the activity of Comet C/1995 O1 (Hale-Bopp) with a thermophysical nucleus model that does not rely on the existence of amorphous ice is presented. Our approach incorporates recent observations allowing to constrain important parameters that control cometary activity. The model accounts for heat conduction, heat advection, gas diffusion, sublimation, and condensation in a porous ice-dust matrix with moving boundaries. Erosion due to surface sublimation of water ice leads to a moving boundary. The movement of the boundary is modeled by applying a temperature remapping technique which allows us to account for the loss in the internal energy of the eroded surface material. These kind of problems are commonly referred to as Stefan problems. The model takes into account the diurnal rotation of the nucleus and seasonal effects due to the strong obliquity of Hale-Bopp as reported by Jorda et al. (Jorda, L., Rembor, K., Lecacheux, J., Colom, P., Colas, F., Frappa, E., Lara, L.M. [1997]. Earth Moon Planets 77, 167-180). Only bulk sublimation of water and CO ice are considered without further assumptions such as amorphous ices with certain amount of occluded CO gas. Confined and localized activity patterns are investigated following the reports of Lederer and Campins (Lederer, S.M., Campins, H. [2002]. Earth Moon Planets 90, 381-389) about the chemical heterogeneity of Hale-Bopp and of Bockelée-Morvan et al. (Bockelée-Morvan, D., Henry, F., Biver, N., Boissier, J., Colom, P., Crovisier, J., Despois, D., Moreno, R., Wink, J. [2009]. Astron. Astrophys. 505, 825-843) about a strong CO source at a latitude of 20°. The best fit to the observations of Biver et al. (Biver, N. et al. [2002]. Earth Moon Planets 90, 5-14) is obtained with a low thermal conductivity of 0.01 W m−1 K−1. This is in agreement with recent results of the Deep Impact mission to 9P/Tempel 1 (Groussin, O., A’Hearn, M.F., Li, J.-Y., Thomas, P.C., Sunshine, J.M., Lisse, C.M., Meech, K.J., Farnham, T.L., Feaga, L.M., Delamere, W.A. [2007]. Icarus 187, 16-25) and with previous thermal simulations (Kührt, E. [1999]. Space Sci. Rev. 90, 75-82). The water production curve matches the production rates well from −4 AU pre-perihelion to the outgoing leg while the model does not reproduce so well the water production beyond 4 AU pre-perihelion. The CO production curve is a good fit to the measurements of Biver et al. (2002) over the whole measured heliocentric range from −7 AU pre- to 15 AU post-perihelion. 相似文献
18.
We present a non-invasive technique for measuring the thermal conductivity of fragile and sensitive materials. In the context of planet-formation research, the investigation of the thermal conductivity of porous dust aggregates provide important knowledge about the influence of heating processes, like internal heating by radioactive decay of short-lived nuclei, e.g. 26Al, on the evolution and growth of planetesimals. The determination of the thermal conductivity was performed by a combination of laboratory experiments and numerical simulations. An IR camera measured the temperature distribution of the sample surface heated by a well-characterized laser beam. The thermal conductivity as free parameter in the model calculations, exactly emulating the experiment, was varied until the experimental and numerical temperature distributions showed best agreement. Thus, we determined for three types of porous dust samples, consisting of spherical, 1.5 μm-sized SiO2 particles, with volume filling factors in the range of 15-54%, the thermal conductivity to be 0.002-0.02 W m−1 K−1, respectively. From our results, we can conclude that the thermal conductivity mainly depends on the volume filling factor. Further investigations, which are planned for different materials and varied contact area sizes (produced by sintering), will prove the appropriate dependencies in more detail. 相似文献
19.
A longstanding problem in thermophysical modeling of cometary nuclei has been to accurately formulate the boundary conditions at the nucleus/coma interface. A correct treatment of the problem, where the Knudsen layer gas just above the cometary surface (which is not in thermodynamic equilibrium) is modeled in parallel with the nucleus, is extremely time-consuming and has so far been avoided. Instead, simplifying assumptions regarding the coma properties are used, e.g., the surface gas density is assumed equal to zero or set to the local saturation value, and the coma backflux is neglected or given some realistic but approximate value. The resulting inaccuracy regarding the exchange of mass, energy, and momentum between the nucleus and the coma, may introduce significant errors in the calculated nucleus temperature profiles, gas production rates, and momentum transfer efficiencies. In this paper, we present a practical, accurate, and time-efficient tool which makes it possible to consider the nucleus and the innermost coma of a comet (the former assumed to consist of a porous mixture of crystalline water ice and dust) as a coupled, physically consistent system. The tool consists of interpolation tables for the surface gas density and pressure, the recondensing coma backflux, and the cooling energy flux due to diffusely scattered coma molecules. The tables cover a wide range of surface temperatures and sub-surface temperature profiles, and can be used to improve the boundary conditions used in thermophysical models. The interpolation tables have been obtained by calculating the transmission distribution functions of gas emerging from sublimating porous ice/dust mixtures with various temperature profiles, which then are used as source functions in a Direct Simulation Monte Carlo model of inelastic intermolecular collisions in the Knudsen layer. 相似文献
20.
We present the characteristics of the dust comae of two comets, 126P/IRAS, a member of the Halley family (a near-isotropic comet), and 2P/Encke, an ecliptic comet. We have primarily used mid- and far-infrared data obtained by the ISOPHOT instrument aboard the Infrared Space Observatory (ISO) in 1996 and 1997, and mid-infrared data obtained by the SPIRIT III instrument aboard the Midcourse Space Experiment (MSX) in 1996. We find that the dust grains emitted by the two comets have markedly different thermal and physical properties. P/IRAS's dust grain size distribution appears to be similar to that of fellow family member 1P/Halley, with grains smaller than 5 microns dominating by surface area, whereas P/Encke emits a much higher fraction of big (20 μm and higher) grains, with the grain mass distribution being similar to that which is inferred for the interplanetary dust population. P/Encke's dearth of micron-scale grains accounts for its visible-wavelength classification as a “gassy” comet. These conclusions are based on analyses of both imaging and spectrophotometry of the two comets; this combination provides a powerful way to constrain cometary dust properties. Specifically, P/IRAS was observed preperihelion while 1.71 AU from the Sun, and seen to have a 15-arcmin long mid-infrared dust tail pointing in the antisolar direction. No sunward spike was seen despite the vantage point being nearly in the comet's orbital plane. The tail's total mass at the time was about 8×109 kg. The spectral energy distribution (SED) is best fit by a modified greybody with temperature T=265±15 K and emissivity ε proportional to a steep power law in wavelength λ: ε∝λ−α, where α=0.50±0.20(2σ). This temperature is elevated with respect to the expected equilibrium temperature for this heliocentric distance. The dust mass loss rate was between 150-600 kg/s (95% confidence), the dust-to-gas mass loss ratio was about 3.3, and the albedo of the dust was 0.15±0.03. Carbonaceous material is depleted in the comet's dust by a factor of 2-3, paralleling the C2 depletion in P/IRAS's gas coma. P/Encke, on the other hand, observed while 1.17 AU from the Sun, had an SED that is best fit by a Planck function with T=270±15 K and no emissivity falloff. The dust mass loss rate was 70-280 kg/s (95% confidence), the dust-to-gas mass loss ratio was about 2.3, and the albedo of the dust was about 0.06±0.02. These conclusions are consistent with the strongly curved dust tail and bright dust trail seen by Reach et al. (2000; Icarus 148, 80) in their ISO 12-μm imaging of P/Encke. The observed differences in the P/IRAS and P/Encke dust are most likely due to the less evolved and insolated state of the P/IRAS nuclear surface. If the dust emission behavior of P/Encke is typical of other ecliptic comets, then comets are the major supplier of the interplanetary dust cloud. 相似文献