首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 593 毫秒
1.
Dolomite cement is a significant and widespread component of Phanerozoic sucrosic dolomites. Cements in dolomites that were never deeply buried are limpid, have planar faces (non‐saddle forms), often distinct zonation in cathodoluminescence and form syntaxial overgrowths on crystals facing pores. Five samples of sucrosic dolomites, interpreted as having had mostly lime‐mudstone or wackestone precursors in four carbonate aquifers, provide insights into the abundance of planar cements in sucrosic dolomites. Such cement comprises 11% to 45% (32% mean) of peritidal to sub‐tidal dolomites on an outcrop in the Edwards aquifer (Early Cretaceous) of central Texas; 19% to 33% (25% mean) of ramp dolomites in the Hawthorn Group (Oligo‐Miocene) and 50% to 70% in shelf dolomites of the Avon Park Formation (Eocene) in the Upper Floridan aquifer of sub‐surface peninsular Florida; 18% to 45% (32+% mean) of sub‐tidal shelf dolomites in quarry sections of the Burlington‐Keokuk Formation (Early Mississippian) in south‐eastern Iowa; and 18% to 76% (50% mean) in shallow cores and outcrops of outer‐shelf dolomites from the Gambier Limestone (Oligo‐Miocene) of South Australia. Backstripping the cement phases revealed by cathodoluminescence colour photomicrographs documents the effects of cements on textural coarsening, pore‐space reduction, induration and general ‘maturation’ of these dolomites. Most pre‐Holocene dolomites are multiphase crystalline rocks composed of: (i) seed crystals or ‘cores’; (ii) crystal cortices that concentrically enlarged the cores; and (iii) free‐space, syntaxial precipitates of limpid cement around the crystals. Remaining CaCO3 grains and micrite can be replaced by dolomite, but typically they are dissolved between stages (ii) and (iii), creating systems of intercrystal and mouldic pores typical of sucrosic dolomites. Networks of cement overgrowths, aided by water‐filled pore systems under hydrostatic to lithostatic pressure, are judged to slow or prevent compaction in sucrosic dolomites. It can be argued that cortex growth involves both replacement of CaCO3 particles and microcementation of their interparticle pores. This interpretation, and the abundance of cements in so many dolomites, would obviate the controversy over the volumetrics of ‘replacement dolomitization’. Limpid, planar and syntaxial dolomite cements of early diagenetic origin are interpreted to have precipitated from clear pore waters, at low temperatures (<30 to 35 °C) and shallow burial depths (<100 m), in water‐saturated networks of dolomite ‘silt’ and ‘sand’. Cements in many dolomites in island and continental–aquifer systems appear to result from event‐driven processes related to sea‐level highstands. Cementation events can follow ‘replacement dolomitization’ events by time intervals ranging from geologically ‘instantaneous’ to tens of million years.  相似文献   

2.
Late Cambrian to Early Ordovician sedimentary rocks in the western Tarim Basin, Northwest China, are composed of shallow-marine platform carbonates. The Keping Uplift is located in the northwest region of this basin. On the basis of petrographic and geochemical features, four matrix replacement dolomites and one type of cement dolomite are identified. Matrix replacement dolomites include (1) micritic dolomites (MD1); (2) fine–coarse euhedral floating dolomites (MD2); (3) fine–coarse euhedral dolomites (MD3); and (4) medium–very coarse anhedral mosaic dolomites (MD4). Dolomite cement occurs in minor amounts as coarse saddle dolomite cement (CD1) that mostly fills vugs and fractures in the matrix dolomites. These matrix dolomites have δ18O values of ?9.7‰ to ?3.0‰ VPDB (Vienna Pee Dee Belemnite); δ13C values of ?0.8‰ to 3.5‰ VPDB; 87Sr/86Sr ratios of 0.708516 to 0.709643; Sr concentrations of 50 to 257 ppm; Fe contents of 425 to 16878 ppm; and Mn contents of 28 to 144 ppm. Petrographic and geochemical data suggest that the matrix replacement dolomites were likely formed by normal and evaporative seawater in early stages prior to chemical compaction at shallow burial depths. Compared with matrix dolomites, dolomite cement yields lower δ18O values (?12.9‰ to ?9.1‰ VPDB); slightly lower δ13C values (?1.6‰–0.6‰ VPDB); higher 87Sr/86Sr ratios (0.709165–0.709764); and high homogenization temperature (Th) values (98°C–225°C) and salinities (6 wt%–24 wt% NaCl equivalent). Limited data from dolomite cement shows a low Sr concentration (58.6 ppm) and high Fe and Mn contents (1233 and 1250 ppm, respectively). These data imply that the dolomite cement precipitated from higher temperature hydrothermal salinity fluids. These fluids could be related to widespread igneous activities in the Tarim Basin occurring during Permian time when the host dolostones were deeply buried. Faults likely acted as important conduits that channeled dolomitizing fluids from the underlying strata into the basal carbonates, leading to intense dolomitization. Therefore, dolomitization, in the Keping Uplift area is likely related to evaporated seawater via seepage reflux in addition to burial processes and hydrothermal fluids.  相似文献   

3.
Early marine diagenetic dolomite is a rather thermodynamically-stable carbonate phase and has potential to act as an archive of marine porewater properties. However, the variety of early to late diagenetic dolomite phases that can coexist within a single sample can result in extensive complexity. Here, the archive potential of early marine dolomites exposed to extreme post-depositional processes is tested using various types of analyses, including: petrography, fluid inclusion data, stable δ13C and δ18O isotopes, 87Sr/86Sr ratios, and U-Pb age dating of various dolomite phases. In this example, a Triassic carbonate platform was dissected and overprinted (diagenetic temperatures of 50 to 430°C) in a strike-slip zone in Southern Spain. Eight episodes of dolomitization, a dolostone cataclasite and late stage meteoric/vadose cementation were recognized. The following processes were found to be diagenetically relevant: (i) protolith deposition and fabric-preservation, and marine dolomitization of precursor aragonite and calcite during the Middle–Late Triassic; (ii) intermediate burial and formation of zebra saddle dolomite and precipitation of various dolomite cements in a Proto-Atlantic opening stress regime (T ca 250°C) during the Early–Middle Jurassic; (iii) dolomite cement precipitation during early Alpine tectonism, rapid burial to ca 15 km, and high-grade anchizone overprint during Alpine tectonic evolution in the Early Eocene to Early Miocene; (iv) brecciation of dolostones to cataclasite during the onset of the Carboneras Fault Zone activity during the Middle Miocene; and (v) late-stage regression and subsequent meteoric overprint. Data shown here document that, under favourable conditions, early diagenetic marine dolomites and their archive data may resist petrographic and geochemical resetting over time intervals of 108 or more years. Evidence for this preservation includes preserved Late Triassic seawater δ13CDIC values and primary fluid inclusion data. Data also indicate that oversimplified statements based on bulk data from other petrographically-complex dolomite archives must be considered with caution.  相似文献   

4.
Pervasive dolomites occur preferentially in the stromatoporoid biostromal (or reefal) facies in the basal Devonian (Givetian) carbonate rocks in the Guilin area, South China. The amount of dolomites, however, decreases sharply in the overlying Frasnian carbonate rocks. Dolostones are dominated by replacement dolomites with minor dolomite cements. Replacement dolomites include: (1) fine to medium, planar‐e floating dolomite rhombs (Rd1); (2) medium to coarse, planar‐s patchy/mosaic dolomites (Rd2); and (3) medium to very coarse non‐planar anhedral mosaic dolomites (Rd3). They post‐date early submarine cements and overlap with stylolites. Two types of dolomite cements were identified: planar coarse euhedral dolomite cements (Cd1) and non‐planar (saddle) dolomite cements (Cd2); they post‐date replacement dolomites and predate late‐stage calcite cements that line mouldic vugs and fractures. The replacement dolomites have δ18O values from ?13·7 to ?9·7‰ VPDB, δ13C values from ?2·7 to + 1·5‰ VPDB and 87Sr/86Sr ratios from 0·7082 to 0·7114. Fluid inclusion data of Rd3 dolomites yield homogenization temperatures (Th) of 136–149 °C and salinities of 7·2–11·2 wt% NaCl equivalent. These data suggest that the replacive dolomitization could have occurred from slightly modified sea water and/or saline basinal fluids at relatively high temperatures, probably related to hydrothermal activities during the latest Givetian–middle Fammenian and Early Carboniferous times. Compared with replacement dolomites, Cd2 cements yield lower δ18O values (?14·2 to ?9·3‰ VPDB), lower δ13C values (?3·0 to ?0·7‰ VPDB), higher 87Sr/86Sr ratios (≈ 0·7100) and higher Th values (171–209 °C), which correspond to trapping temperatures (Tr) between 260 and 300 °C after pressure corrections. These data suggest that the dolomite cements precipitated from higher temperature hydrothermal fluids, derived from underlying siliciclastic deposits, and were associated with more intense hydrothermal events during Permian–Early Triassic time, when the host dolostones were deeply buried. The petrographic similarities between some replacement dolomites and Cd2 dolomite cements and the partial overlap in 87Sr/86Sr and δ18O values suggest neomorphism of early formed replacement dolomites that were exposed to later dolomitizing fluids. However, the dolomitization was finally stopped through invasion of meteoric water as a result of basin uplift induced by the Indosinian Orogeny from the early Middle Triassic, as indicated by the decrease in salinities in the dolomite cements in veins (5·1–0·4 wt% NaCl equivalent). Calcite cements generally yield the lowest δ18O values (?18·5 to ?14·3‰ VPDB), variable δ13C values (?11·3 to ?1·2‰ VPDB) and high Th values (145–170 °C) and low salinities (0–0·2 wt% NaCl equivalent), indicating an origin of high‐temperature, dilute fluids recharged by meteoric water in the course of basin uplift during the Indosinian Orogeny. Faults were probably important conduits that channelled dolomitizing fluids from the deeply buried siliciclastic sediments into the basal carbonates, leading to intense dolomitization (i.e. Rd3, Cd1 and Cd2).  相似文献   

5.
The partly dolomitized Swan Hills Formation (Middle‐Upper Devonian) in the Simonette oil field of west‐central Alberta underwent a complex diagenetic history, which occurred in environments ranging from near surface to deep (>2500 m) burial. Five petrographically and geochemically distinct dolomites that include both cementing and replacive varieties post‐date stylolites in limestones (depths >500 m). These include early planar varieties and later saddle dolomites. Fluid inclusion data from saddle dolomite cements (Th=137–190 °C) suggest that some precipitated at burial temperatures higher than the temperatures indicated by reflectance data (Tpeak=160 °C). Thus, at least some dolomitizing fluids were ‘hydrothermal’. Fluorescence microscopy identified three populations of primary hydrocarbon‐bearing fluid inclusions and confirms that saddle dolomitization overlapped with Upper Cretaceous oil migration. The source of early dolomitizing fluids probably was Devonian or Mississippian seawater that was mixed with a more 87Sr‐rich fluid. Fabric‐destructive and fabric‐preserving dolostones are over 35 m thick in the Swan Hills buildup and basal platform adjacent to faults, thinning to less than 10 cm thick in the buildup between 5 and 8 km away from the faults. This ‘plume‐like’ geometry suggests that early and late dolomitization events were fault controlled. Late diagenetic fluids were, in part, derived from the crystalline basement or Palaeozoic siliciclastic aquifers, based on 87Sr/86Sr values up to 0·7370 from saddle dolomite, calcite and sphalerite cements, and 206Pb/204Pb of 22·86 from galena samples. Flow of dolomitizing and mineralizing fluids occurred during burial greater than 500 m, both vertically along reactivated faults and laterally in the buildup along units that retained primary and/or secondary porosity.  相似文献   

6.
Cambrian dolostone reservoirs in the Tarim Basin, China, have significant potential for future discoveries of petroleum, although exploration and production planning is hampered by limited understanding of the occurrence and distribution of dolomite in such ancient rocks buried to nearly 8 km. The study herein accessed new drill core samples which provide an opportunity to understand the dolomitization process in deep basins and its impact on Cambrian carbonate reservoirs. This study documents the origin of the dolostone reservoirs using a combination of petrology, fluid‐inclusion microthermometry, and stable and radiogenic‐isotopes of outcrop and core samples. An initial microbial dolomitization event occurred in restricted lagoon environments and is characterized by depleted δ13C values. Dolomicrite from lagoonal and sabkha facies, some fabric‐retentive dolomite and fabric‐obliterative dolomite in the peloidal shoal and reef facies show the highest δ18O values. These dolomites represent relatively early reflux dolomitization. The local occurrence of K‐feldspar in dolomicrite indicates that some radiogenic strontium was contributed via terrigenous input. Most fabric‐retentive dolomite may have precipitated from seawater at slightly elevated temperatures, suggested by petrological and isotopic data. Most fabric‐obliterative dolomite, and medium to coarse dolomite cement, formed between 90°C and 130°C from marine evaporitic brine. Saddle dolomite formed by hydrothermal dolomitization at temperatures up to 170°C, and involved the mixing of connate brines with Sr‐ enriched hydrothermal fluids. Intercrystalline, moldic, and breccia porosities are due to the early stages of dolomitization. Macroscopic, intergranular, vuggy, fracture and dissolution porosity are due to burial‐related dissolution and regional hydrothermal events. This work has shown that old (for example, Cambrian or even Precambrian) sucrosic dolomite with associated anhydrite, buried to as much as 8000 m, can still have a high potential for hosting substantial hydrocarbon resources and should be globally targeted for future exploration.  相似文献   

7.
The Tepearasi Formation of the autochthonous Geyikdagi Group in the Central Tauride Belt, SE of Beysehir, is Dogger in age and consists dominantly of massive limestones and greyish dolomites occurring within the middle to upper sections. The total thickness of the dolomitic levels ranges from 100-300 m and laterally extends 500-700 m. Three types of dolomite were distinguished through petrographic analyses: homogeneous, mottled (saddle-crystalline) and joint-filling dolomite, which were interpreted to have formed in two different stages, early diagenetic and late diagenetic. The homogeneous dolomite of the early diagenetic stage is light-coloured and monotonous-textured and shows the form of a dolosparite mosaic. The mottled dolomite formed in the late diagenetic stage is light- to dark-coloured and coarsely granular idiomorphic. The other type of late diagenetic dolomite, described as the joint-filling type, presents a crystal growth pattern from the joint walls towards the centre of the joint space. I  相似文献   

8.
In the Tarim Basin of northwestern China hydrocarbon deposits have been discovered in parts of the thick strata of Cambrian dolostones. Based on petrographic study, six types of dolostone have been distinguished: Type-1, pink mud-bearing silty crystalline dolostone (PMSD); Type-2, gypsum- and salt-bearing fine crystalline dolostone (GSFD); Type-3, fine crystalline dolostone with dolomite crystals with cloudy core and clear rim (CCFD); Type-4, deep gray mud-bearing silty crystalline dolostone (GMSD); Type-5, euhedral coarse crystalline dolostone (ECD); and Type-6, xenotopic coarse crystalline dolostone (XCD). Applying petrographic and geochemical methods, the genesis of the dolostones is studied in this paper. Normally, Type-1 dolostone shows U- and Mo-depleted characteristics, reflecting a more oxidized formation environment; High δ18O and the purple color are consistent with formation of Sabkha dolostones on a supratidal flat. Types 2, 3, 4 dolostones show strata formation, similar REE patterns and 87Sr/86Sr ratios with contemporaneous limestones, suggesting a penecontemporaneous origin from seawater. Types 5 and 6 dolostones commonly occur as interbedded rocks, indicating secondary genesis after diagenesis. Type-6 dolostone has the highest order degree (OD) values (average 0.86), the lowest oxygen isotope values and positive Eu anomalies, which are consistent with previously reported hydrothermal dolostones. Differently, Type-5 shows euhedral texture, higher δ18O value, similar REE characteristic and 87Sr/86Sr ratios in comparison with contemporaneous limestones, suggesting that this type might have been dolomitized by down-transferring evaporated seawater during shallow burial stage. Dolostone fluid sources, formation environments and crystallizing dynamics are summarized and possible genetic models for the six types are proposed.  相似文献   

9.
The presence of dolomite breccia patches along Wadi Batha Mahani suggests large-scale fluid flow causing dolomite formation. The controls on dolomitization have been studied, using petrography and geochemistry. Dolomitization was mainly controlled by brecciation and the nearby Hagab thrust. Breccias formed as subaerial scree deposits, with clay infill from dissolved platform limestones, during Early Cretaceous emergence. Cathodoluminescence of the dolostones indicates dolomitization took place in two phases. First, fine-crystalline planar-s dolomite replaced the breccias. Later, these dolomites were recrystallized by larger non-planar dolomites. The stable isotope trend towards depleted values (δ18O: − 2.7‰ to − 10.2‰ VPDB and δ13C: − 0.6‰ to − 8.9‰ VPDB), caused by mixing dolomite types during sampling, indicates type 2 dolomites were formed by hot fluids. Microthermometry of quartz cements and karst veins, post-dating dolomites, also yielded high temperatures. Hot formation waters which ascended along the Hagab thrust are invoked to explain type 2 dolomitization, silicification and hydrothermal karstification.  相似文献   

10.
Upper Pliocene dolomites (‘white earth’) from La Roda, Spain, offer a good opportunity to evaluate the process of dolomite formation in lakes. The relatively young nature of the deposits could allow a link between dolomites precipitated in modern lake systems and those present in older lacustrine formations. The La Roda Mg‐carbonates (dolomite unit) occur as a 3·5‐ to 4‐m‐thick package of poorly indurated, white, massive dolomite beds with interbedded thin deposits of porous carbonate displaying root and desiccation traces as well as local lenticular gypsum moulds. The massive dolomite beds consist mainly of loosely packed 1‐ to 2‐μm‐sized aggregates of dolomite crystals exhibiting poorly developed faces, which usually results in a subrounded morphology of the crystals. Minute rhombs of dolomite are sparse within the aggregates. Both knobbly textures and clumps of spherical bodies covering the crystal surfaces indicate that bacteria were involved in the formation of the dolomites. In addition, aggregates of euhedral dolomite crystals are usually present in some more clayey (sepiolite) interbeds. The thin porous carbonate (mostly dolomite) beds exhibit both euhedral and subrounded, bacterially induced dolomite crystals. The carbonate is mainly Ca‐dolomite (51–54 mol% CaCO3), showing a low degree of ordering (degree of ordering ranges from 0·27 to 0·48). Calcite is present as a subordinate mineral in some samples. Sr, Mn and Fe contents show very low correlation coefficients with Mg/Ca ratios, whereas SiO2 and K contents are highly correlated. δ18O‐ and δ13C‐values in dolomites range from ?3·07‰ to 5·40‰ PDB (mean=0·06, σ=1·75) and from ?6·34‰ to ?0·39‰ PDB (mean=?3·55, σ=1·33) respectively. Samples containing significant amounts of both dolomite and calcite do not in general show significant enrichment or depletion in 18O and 13C between the two minerals. The correlation coefficient between δ18O and δ13C for dolomite is extremely low and negative (r=?0·05), whereas it is higher and positive (r=0·47) for calcite. The lacustrine dolomite deposit from La Roda is interpreted mainly as a result of primary precipitation of dolomite in a shallow, hydrologically closed perennial lake. The lake was supplied by highly saturated HCO3?/CO32? groundwater that leached dolomitic Mesozoic formations. Precipitation of dolomite from alkaline lake waters took place under a semi‐arid to arid climate. However, according to our isotopic data, strong evaporative conditions were not required for the formation of the La Roda dolomite. A significant contribution by bacteria to the formation of the dolomites is assumed in view of both petrographic and geochemical evidence.  相似文献   

11.
This paper describes the occurrence of dolomite and the mechanism of dolomitization of the Upper Triassic-Lower Jurassic K?z?loren Formation in the autochthonous Bolkardag? unit of the middle Taurus Mountains in south western Turkey. Dolomites were analyzed for geochemical, isotopic and crystallographic variation. Dolomites occur as a replacement of precursor carbonate and cement. The dolomite crystals range from <10 to ~1000 μm existing as both replacements and cements. Sr concentrations range between 84 and 156 ppm, and the molar Sr/Ca ratios of dolomitizing fluids are estimated to range between 0.0066 to 0.013 ratios. Dolomites are Ca-rich (with average CaCO3 and MgCO3 equal to 56.43 and 43.57 mol%, respectively) and they are non-stoichiometric, with an average Sr=116 ppm, Na=286 ppm, Mn=81 ppm, Fe=1329 ppm, and δ18O and δ13C ranges from –0.6‰ to –6.1‰ Pee Dee Belemnite [PDB], and +1.2 to +3.9‰ PDB. The North American Shale Composition [NASC]-normalized rare earth element (REE) values of the both limestone and dolomite sample groups show very similar REE patterns characterized by small positive Eu (mean=1.32 and mean=1.42, respectively) and slightly or considerably negative Ce (mean=0.61 and mean=0.72, respectively) anomalies and a clear depletion in all REE species. The K?z?loren Formation dolomites have been formed as early diagenetic from mixing zone fluids at the tidal-subtidal environment and at the late diagenetic from basinal brines at the shallow-deep burial depths.  相似文献   

12.
Peritidal carbonates of the Lower Jurassic (Liassic) Gibraltar Limestone Formation, which form the main mass of the Rock of Gibraltar, are replaced by fine and medium crystalline dolomites. Replacement occurs as massive bedded or laminated dolomites in the lower 100 m of an ≈460‐m‐thick platform succession. The fine crystalline dolomite has δ18Ο values either similar to, or slightly higher than, those expected from Early Jurassic marine dolomite, and δ13C values together with 87Sr/86Sr ratios that overlap with sea‐water values for that time, indicating that the dolomitizing fluid was Early Jurassic sea water. Absence of massive evaporitic minerals and/or evaporite solution‐collapse breccias in these carbonate rocks indicates that the salinity of sea water during dolomitization was below that of gypsum precipitation. The occurrence of peritidal facies, a restricted microbiota and rare gypsum pseudomorphs are also consistent with penesaline conditions (salinity 72–199‰). The medium crystalline dolomite has some δ18Ο and δ13C values and 87Sr/86Sr ratios similar to those of Early Jurassic marine dolomites, which indicates that ambient sea water was again a likely dolomitizing fluid. However, the spread of δ18Ο, δ13C and 87Sr/86Sr values indicates that dolomitization occurred at slightly increased temperatures as a result of shallow (≈500 m) burial or that dolomitization was multistage. These data support the hypothesis that penesaline sea water can produce massive dolomitization in thick peritidal carbonates in the absence of evaporite precipitation. Taking earlier models into consideration, it appears that replacement dolomites can be produced by sea water or modified sea water with a wide range of salinities (normal, penesaline to hypersaline), provided that there is a driving mechanism for fluid migration. The Gibraltar dolomites confirm other reports of significant Early Jurassic dolomitization in the western Tethys carbonate platforms.  相似文献   

13.
Hydrothermal Dolomite （HTD） is present in the Upper Sinian （Upper Proterozoic） Dengying Formation, east Sichuan Basin, China. The strata are comprised by primary dolomite. The HTD has various textures, including zebra dolomite, subhorizontal sheet-like cavities filled by saddle dolomite and breccias cemented by saddle dolomites as well occur as a fill of veins and fractures. Also co-occur MVT type lead-zinc ores in the study area. The δ13C and δ18O isotopes of HTD in the Upper Sinian Dengying Formation are lighter than those of the host rocks, while STSr/86Sr is higher. The apparent difference in carbon, oxygen and strontium isotopes, especially the large difference in S7Sr/S6Sr isotopes ratio indicate crystallization from hot basinal and/or hydrothermal fluids. Saddle dolomite was precipitated at temperatures of 270-320℃. The diagenetic parasequences of mineral assemblage deposited in the Dengying Formation are： （1） dolomite host rock →sphalerite-galena-barite-fluorite; （2） dolomite host rock →saddle dolomite →quartz; （3） dolomite host rock →saddle dolomite→bitumen; （4） dolomite host rock →saddle dolomite →barite. The mean chemical composition of the host dolomite matrix and HTD didn＇t change much during hydrothermal process. The fluids forming the HTDs in the Dengying Formation were mixtures of freshwater from the unconformity at the top of Sinian, fluids from diagenetic compaction and hydrocarbon generation ＆ expulsion from the Lower Cambrian Niutitang Formation mudstones or the Doushantuo Formation silty mudstones, and hydrothermal fluids from the basement. The hydrocarbon reservoirs associated with the HTD were mostly controlled by the basement faults and fractures and karsting processes at the unconformity separating Sinian and Cambrian strata. The hydrocarbon storage spaces of HTD included dissolved cavities and intercrystalline pores. Dissolution cavities are extensive at the top of Dengying Formation, up to about 46m below the unconformity between Sinian an  相似文献   

14.
《Comptes Rendus Geoscience》2007,339(3-4):223-239
Neoproterozoic glacial and post-glacial sediments from the Volta Basin (West Africa) form a stratigraphic ‘Triad’ of tillites, carbonates and cherts. The carbonates that cap the tillites were studied in detail at Bwipe (Ghana), in the western part of the basin. They are made of finely-laminated dolostones with well-preserved sedimentary features, suggesting that dolomite formation was penecontemporaneous of deposition in a warm, arid peritidal environment, with microbial activity. Rare-earth element distribution display seawater-like patterns. Redox-sensitive trace elements indicate suboxic conditions. High Ba/Al ratios can be related to high organic productivity. δ13C values are nearly constant at −3.7‰ and δ18OPDB are about −6‰. 87Sr/86Sr ratios range between 0.7061 and 0.7073. The δ13C signatures are nearly similar to those of coeval cap dolostones from the northern part of the Basin. The dolostones change upwards to limestones with secondary textures, as well as more negative δ13C and higher 87Sr/86Sr ratio. Therefore, only the dolostones witness the post-glacial conditions in seawater. It is proposed that, due to a bloom of microbial productivity following ice thaw, organic matter likely accumulated at the water–sediment interface and was consumed by sulphate-reducing bacteria, leading to the precipitation of δ13C-negative dolomite. This microbially mediated model is supported by present-day field evidence from hypersaline lagoons in Brazil and by previously published culture experiments. It is consistent with the sedimentological and geochemical data from the Ghana cap dolostones and can be applied to other Neoproterozoic cap dolostones worldwide.  相似文献   

15.
采用染色薄片鉴定、阴极发光显微镜观察、微量元素分析、碳氧稳定同位素测定及包体侧温等手段，对塔里木盆地巴楚断隆区寒武系和奥陶系白云岩的特征及成因进行了研究，共划分出四种类型的白云岩：①泥粉晶白云岩，其m(Ca)/m(Mg)平均为3-10，Sr含量高（>300×10-6 ），m(Sr)/m(Ba)>>1，?13C值较高（-1‰-+1‰），18O值较低（-5‰--8‰），沉积环境为潮上带云坪，为准同生作用阶段潮上萨布哈白云化作用形成。②含雾心亮边白云石的细晶白云岩，其m(Ca)/m(Mg)较低（1-2），Sr含量中等（100×10-6-200×10-6），m(Sr)/m(Ba) >1，?13C值在-2‰左右，18O值低，在-7‰左右，沉积环境为开阔台地浅滩，为准同生或早期成岩作用阶段回流渗透白云化作用形成。③含明亮白云石晶体及钙质残余的钙质白云岩，其m(Ca)/m(Mg)较低（1左右），Sr含量最低（100×10-6左右），m(Sr)/m(Ba) < 1，?13C值最低（-1‰--3‰），?18O值较低（-6‰左右），沉积环境为灰坪、云坪及开阔台地，为准同生或早期成岩作用阶段混合水白云化作用形成。④砂糖状白云岩，其m(Ca)/m(Mg)较低（1-2），Sr含量低（<100×10-6），m(Sr)/m(Ba)<1，?13C值较高（-1‰-+3‰），18O值较低（-5‰--8‰），沉积环境多为浅滩，为晚期成岩作用阶段埋藏白云化作用形成。  相似文献   

16.
The Late Jurassic-early Senonian Cehennemdere Formation extending in an E-W direction in a wide area at the south of the Bolkar Mountains (Central Taurides, Turkey) is composed of platform carbonates. The formation was deposited in an environment that was being transformed from a shallow carbonate platform to an open shelf and a continental slope, and was buried until late Paleocene uplift. The formation, with a thickness of about 360 m, was chiefly developed as textures consisting of mudstone and wackestone and has been commonly dolomitized. Based on petrographic and geochemical properties, four types of replacement dolomites and two types of dolomite cements were distinguished. Replacement dolomite (RD), which is cut by low-amplitude stylolites developed as (1) fine crystalline planar-s dolomite (RD1); (2) medium crystalline planar-s dolomite (RD2); (3) medium-coarse crystalline planar-e dolomite (RD3) and; (4) coarse crystalline planar-s (e) dolomite (RD4). Two types of dolomite cements (CD) observed in low abundance and overlie low-amplitude stylolites: (1) coarse crystalline dolomite cement (CD1) filling dissolution voids and fractures in RD1 dolomites, and; (2) rim dolomite cement (CD2) that commonly develops on the space-facing surfaces of RD4 dolomite. Replacement dolomites are non-stoichiometric (Ca54–59Mg41–46), have similar geochemical properties, and are generally dull red/non luminescent in appearance. Replacement dolomite is represented by δ18O values from −4.5 to −0.5‰ VPDB, δ13C values of −0.7 to 2.7‰ VPDB, and 87Sr/86Sr ratios ranging from 0.707178 to 0.707692. Petrographic and geochemical data indicate that replacement dolomite (particularly RD2, RD3, and RD4 dolomite) was formed at shallow-intermediate burial depths during the Late Jurassic-Early Cretaceous, from seawater and/or from slightly modified seawater. The replacement dolomite (RD) was then recrystallized at increased burial depths and temperatures. Dolomite cements are similar to replacement dolomites in that they are non-stoichiometric (Ca55Mg45) and have similar trace element compositions. CD1 dolomite, which cuts low-amplitude stylolites, was formed during intermediate to deep burial following stylolite development. CD2 dolomite was precipitated in intercrystal pores in association with RD4 dolomite. Remaining pore space was filled with bitumen.  相似文献   

17.
Dolomites occur extensively in Cambrian to Lower Ordovician carbonates in the Tienshan orogen of the Quruqtagh area, north‐east Tarim Basin, where thick (up to 1 km), dark grey lenticular limestones of semi‐pelagic to pelagic origin are prominent. The dolomites generally occur as beige, anastomosed geobodies that cross‐cut well‐stratified limestones. Based on detailed field investigations and petrographic examination, three types of matrix dolomite are identified: fine crystalline planar‐e (Md1), fine to medium crystalline planar‐s (e) (Md2) and fine to coarse crystalline non‐planar‐a (Md3) dolomites. One type of cement dolomite, the non‐planar saddle dolomite (Cd), is also common. The preferential occurrence of Md1 along low‐amplitude stylolites points to a causal link to pressure dissolution by which minor Mg ions were probably released for replacive dolomitization during shallow burial compaction. Type Md2, Md3 and Cd dolomites, commonly co‐occurring within the fractured zones, have large overlaps in isotopic composition with that of host limestone, implying that dolomitizing fluids inherited their composition from remnant pore fluids or were buffered by the formation water of host limestones through water–rock interaction. However, the lower δ18O and higher 87Sr/86Sr ratios of these dolomites also suggest more intense fluid–rock interaction at elevated temperature and inputs of Mg and radiogenic Sr from the host limestones with more argillaceous matter and possibly underlying Neoproterozoic siliciclastic strata. Secondary tensional faults and fractures within a compressional tectonic regime were probably important conduits through which higher‐temperature Mg‐rich fluids that had been expelled from depth were driven by enhanced tectonic compression and heating during block overthrusting, forming irregular networks of dolomitized bodies enclosed within the host limestones. This scenario probably took place during the Late Hercynian orogeny, as the Tarim block collided with Tienshan island arc system to the north and north‐east. Subsequent downward recharges of meteoric fluids into the dolomitizing aquifer probably terminated dolomitization as a result of final closure of the South Tienshan Ocean (or Palaeo‐Asian Ocean) and significant tectonic uplift of the Tienshan orogen. This study demonstrates the constructive role of notably tensional (or transtensional) faulting/fracturing in channelling fluids upward as a result of intense tectonic compression and heating along overthrust planes on the convergent plate margin; however, a relatively short‐lived, low fluid flux may have limited the dolomitization exclusively within the fractured/faulted limestones in the overthrust sheets.  相似文献   

18.
Widespread dolomitization and leaching occur in the Asbian to Brigantian (Dinantian) sequence of the Bowland Basin. Within this mudrock-dominated succession, dolomite is developed in calcarenites and limestone breccia/conglomerates deposited in a carbonate slope environment (Pendleside Limestone) and also within graded quartz wackes deposited by density currents in a generally ‘starved’ basin environment (Pendleside Sandstone). The dolomitized intervals range in thickness from less than one metre to several tens of metres and have a stratabound nature. All stages of calcite cement pre-date dolomitization and calcite veins are dolomitized. Dolomite crystals replace neomorphic spar and may also contain insoluble residues that were concentrated along stylolites. Thus dolomitization was a late stage process within the carbonate diagenetic sequence. A late-stage diagenetic origin is also indicated within the sandstones, with dolomite post-dating the development of quartz overgrowths. Six main textural styles of dolomite are observed: (1) scattered; (2) mosaic; (3) subhedral to euhedral rhombic; (4) microcrystalline; (5) single crystal and (6) saddle. The style of dolomite developed is dependent on the host rock mineralogy, on whether it is space-filling or replacive and also on temperature. Chemically the dolomite varies from near stoichiometric compositions to ankeritic varieties containing up to 20 mole % FeCO3. Generally the dolomites have isotopic compositions depleted in δ18O compared to the host limestone, with similar or lighter δ13C values. Initial dolomite was of the scattered type, but with progressive replacement of the host a mosaic dolostone with a sucrosic texture was produced. There was a general increase in the Fe and Mn content and reduction in δ18O ratio of the crystals during dolomitization. Leaching is restricted to partly dolomitized horizons, where calcite, feldspars, micas, clays and, to some extent, dolomite have been leached. This has produced biomouldic and vuggy secondary porosity within the carbonates, whereas in the sandstones honeycombed, corroded and floating grains associated with oversized pores occur. Porosity within both carbonates and sandstones is reduced by ferroan dolomite/ankerite cements. Field, petrographic and chemical characteristics indicate that dolomitizing solutions were predominantly derived from the enclosing mudrocks (Bowland Shales) during intermediate/deep burial. Fluid migration out of the mudrocks would have been sided by dehydration reactions and overpressure, the fluids migrating along the most permeable horizons—the coarse grained carbonates and sandstones that are now dolomitized and contain secondary porosity.  相似文献   

19.
华北秦皇岛地区的中奥陶统马家沟组以广泛发育海相白云质灰岩、灰质白云岩和白云岩为特征。在石门寨奥陶系亮甲山剖面,马家沟组自下而上识别出四类碳酸盐岩:含白云石泥晶灰岩（类型I）、细-粉晶白云岩（类型II）、“麦粒状”细-粉晶白云岩（类型III）和钙质泥晶白云岩（类型IV）。类型I主要由泥晶方解石构成,含三叶虫和介形类生物碎片,少量自形的粉晶白云石呈“漂浮状”分布于压溶缝合线内,基质中少见。岩相学和地球化学特征表明此类白云石形成于埋藏成岩期压溶作用之后,压溶缝为云化流体提供通道,压溶缝内泥质组分的成岩转化可能为白云化作用提供了部分镁离子来源;类型II白云岩主要由自形、半自形不等粒粉晶-细晶白云石构成,白云石普遍具有“雾心亮边”,在背散射和阴极发光照片中白云石可见清晰的多圈亮、暗相间环带。环带和带间主量元素的差异表明白云石经历了埋藏成岩期多期成岩流体的改造;类型III白云岩中白云石呈单向延伸的“米粒”或“麦粒”状,粉晶为主,晶体长轴方向具有垂直结晶轴c的特点,白云石具富铁、贫锰、锶的特点,长、短对角线上钙、镁离子的微小差异以及阴极发光特征表明此类白云石也经历了埋藏成岩期的改造,成岩流体使白云石发生微溶作用可能是导致白云石晶体单向延伸且光学性质固定取向的主要原因;类型IV为钙质泥晶球粒白云岩,含石膏假晶,白云石多为微晶和微亮晶,球粒也多由微晶白云石构成,溶孔发育,但全被亮晶贫铁方解石充填,此类岩石的白云化作用发生得很早,可能形成于潮上带澙湖或潮坪环境。综上所述,研究区马家沟组碳酸盐岩具有经历了不同类型及多期白云化作用的特点。自剖面底部向顶部,白云石的有序度由0.8降至0.47,而去云化作用则呈现逐渐增强的趋势。  相似文献   

20.
HAIRUO Qing 《Sedimentology》1998,45(2):433-446
The petrography and geochemistry of fine- and medium-crystalline dolomites of the Middle Devonian Presqu’ile barrier at Pine Point (Western Canada Sedimentary Basin) are different from those of previously published coarse-crystalline and saddle dolomites that are associated with late-stage hydrothermal fluids. Fine-crystalline dolomite consists of subhedral to euhedral crystals, ranging from 5 to 25 μm (mean 8 μm). The dolomite interbedded with evaporitic anhydrites that occur in the back-barrier facies in the Elk Point Basin. Fine-crystalline dolomite has δ18Ο values between ?1·6 to –3·8‰ PDB and 87Sr/86Sr ratios from 0·7079–0·7081, consistent with derivation from Middle Devonian seawater. Its Sr concentrations (55–225 p.p.m., mean 105 p.p.m.) follow a similar trend to modern Little Bahama seawater dolomites. Its rare earth element (REE) patterns are similar to those of the limestone precursors. These data suggest that this fine-crystalline dolomite formed from Middle Devonian seawater at or just below the sea floor. Medium-crystalline dolomite in the Presqu’ile barrier is composed of anhedral to subhedral crystals (150–250 μm, mean 200 μm), some of which have clear rims toward the pore centres. This dolomite occurs mostly in the southern lower part of the barrier. Medium-crystalline dolomite has δ18O values between ?3·7 to ?9·4‰ PDB (mean ?5·9‰ PDB) and 87Sr/86Sr ratios from 0·7081–0·7087 (mean 0·7084); Sr concentrations from 30 to 79 p.p.m. (mean 50 p.p.m.) and Mn content from 50 to 253 p.p.m. (mean 161 p.p.m.); and negative Ce anomalies compared with those of marine limestones. The medium-crystalline dolomite may have formed either (1) during shallow burial at slightly elevated temperatures (35–40 °C) from fluids derived from burial compaction, or, more likely (2) soon after deposition of the precursor sediments by Middle Devonian seawater derived from the Elk Point Basin. These results indicate that dolomitization in the Middle Devonian Presqu’ile barrier occurred in at least two stages during evolution of the Western Canada Sedimentary Basin. The geochemistry of earlier formed dolomites may have been modified if the earlier formed dolomites were porous and permeable and water/rock ratios were large during neomorphism.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号