首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
High difference between dielectric constant of water (dielectric constant about 80) and dielectric constant of dried soil (dielectric constant about 2–3) makes Synthetic Aperture Radar (SAR) highly capable in soil moisture estimation. However, there are other factors which affect on radar backscattering coefficient. The most important parameters are vegetation cover, surface roughness and sensor parameters (frequency, polarization and incidence angle). In this paper, the importance of considering the effects of these parameters on SAR backscatter coefficients is shown by comparing different soil moisture estimation models. Moreover, an experimental soil moisture estimation model is developed. It is shown that this model can be used to estimate soil moisture under a variety of vegetation cover densities. The new developed model is based on combination of different indices derived from Landsat5-Thematic Mapper and AIRSAR images. The AIRSAR image is used for extraction of backscattering coefficient and incidence angle while TM image is used for calculation of Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Normalized Difference Water Index (NDWI) and Brightness Temperature. Then a soil moisture estimation model which is named as Hybrid model is developed based on integration of all of these parameters. The accuracies of this model are assessed in the NDVI ranges of 0–0.2, 0.2–0.4 and 0.4–0.7 by using SAR data in C band and L band frequencies and also in different polarizations of HH, HV, VV and TP. The results show that for instance in L band with HV polarization, R-square values of 0.728, 0.628 and 0.527 are obtained between ground measured soil moisture and estimated soil moisture values using the Hybrid model for NDVI ranges of 0–0.2, 0.2–0.4 and 0.4–0.7, respectively.  相似文献   

2.
One of the main objectives of ESA’s Gravity Field and Steady-State Ocean Circulation mission GOCE (Gravity field and steady-state ocean circulation mission, 1999) is to allow global unification of height systems by directly providing potential differences between benchmarks in different height datum zones. In other words, GOCE provides a globally consistent and unbiased geoid. If this information is combined with ellipsoidal (derived from geodetic space techniques) and physical heights (derived from leveling/gravimetry) at the same benchmarks, datum offsets between the datum zones can be determined and all zones unified. The expected accuracy of GOCE is around 2–3 cm up to spherical harmonic degree n max ≈ 200. The omission error above this degree amounts to about 30 cm which cannot be neglected. Therefore, terrestrial residual gravity anomalies are necessary to evaluate the medium and short wavelengths of the geoid, i.e. one has to solve the Geodetic Boundary Value Problem (GBVP). The theory of height unification by the GBVP approach is well developed, see e.g. Colombo (A World Vertical Network. Report 296, Department of Geodetic Science and Surveying, 1980) or Rummel and Teunissen (Bull Geod 62:477–498, 1988). Thereby, it must be considered that terrestrial gravity anomalies referring to different datum zones are biased due to the respective datum offsets. Consequently, the height reference surface of a specific datum zone deviates from the unbiased geoid not only due to its own datum offset (direct bias term) but is also indirectly affected by the integration of biased gravity anomalies. The latter effect is called the indirect bias term and it considerably complicates the adjustment model for global height unification. If no satellite based gravity model is employed, this error amounts to about the same size as the datum offsets, i.e. 1–2 m globally. We show that this value decreases if a satellite-only gravity model is used. Specifically for GOCE with n max ≈ 200, the error can be expected not to exceed the level of 1 cm, allowing the effect to be neglected in practical height unification. The results are supported by recent findings by Gatti et al. (J Geod, 2012).  相似文献   

3.
Global navigation satellite systems (GNSS) data are a fundamental source of information for achieving a better understanding of geophysical and climate-related phenomena. However, discontinuities in the coordinate time series might be a severe limiting factor for the reliable estimate of long-term trends. A methodological approach has been adapted from Rodionov (Geophys Res Lett 31:L09204, 2004; Geophys Res Lett 31:L12707, 2006) and from Rodionov and Overland (J Marine Sci 62:328–332, 2005) to identify both the epoch of occurrence and the magnitude of jumps corrupting GNSS data sets without any a priori information on these quantities. The procedure is based on the Sequential t test Analysis of Regime Shifts (STARS) (Rodionov in Geophys Res Lett 31:L09204, 2004). The method has been tested against a synthetic data set characterized by typical features exhibited by real GNSS time series, such as linear trend, seasonal cycle, jumps, missing epochs and a combination of white and flicker noise. The results show that the offsets identified by the algorithm are split into 48 % of true-positive, 28 % of false-positive and 24 % of false-negative events. The procedure has then been applied to GPS coordinate time series of stations located in the southeastern Po Plain, in Italy. The series span more than 15 years and are affected by offsets of different nature. The methodology proves to be effective, as confirmed by the comparison between the corrected GPS time series and those obtained by other observation techniques.  相似文献   

4.
In March 2013, the fourth generation of European Space Agency’s (ESA) global gravity field models, DIR4 (Bruinsma et al. in Proceedings of the ESA living planet symposium, 28 June–2 July, Bergen, ESA, Publication SP-686, 2010b) and TIM4 (Migliaccio et al. in Proceedings of the ESA living planet symposium, 28 June–2 July, Bergen, ESA, Publication SP-686, 2010), generated from the Gravity field and steady-state Ocean Circulation Explorer (GOCE) gravity observation satellite was released. We evaluate the models using an independent ground truth data set of gravity anomalies over Australia. Combined with Gravity Recovery and Climate Experiment (GRACE) satellite gravity, a new gravity model is obtained that is used to perform comparisons with GOCE models in spherical harmonics. Over Australia, the new gravity model proves to have significantly higher accuracy in the degrees below 120 as compared to EGM2008 and seems to be at least comparable to the accuracy of this model between degree 150 and degree 260. Comparisons in terms of residual quasi-geoid heights, gravity disturbances, and radial gravity gradients evaluated on the ellipsoid and at approximate GOCE mean satellite altitude ( $h=250$  km) show both fourth generation models to improve significantly w.r.t. their predecessors. Relatively, we find a root-mean-square improvement of 39 % for the DIR4 and 23 % for TIM4 over the respective third release models at a spatial scale of 100 km (degree 200). In terms of absolute errors, TIM4 is found to perform slightly better in the bands from degree 120 up to degree 160 and DIR4 is found to perform slightly better than TIM4 from degree 170 up to degree 250. Our analyses cannot confirm the DIR4 formal error of 1 cm geoid height (0.35 mGal in terms of gravity) at degree 200. The formal errors of TIM4, with 3.2 cm geoid height (0.9 mGal in terms of gravity) at degree 200, seem to be realistic. Due to combination with GRACE and SLR data, the DIR models, at satellite altitude, clearly show lower RMS values compared to TIM models in the long wavelength part of the spectrum (below degree and order 120). Our study shows different spectral sensitivity of different functionals at ground level and at GOCE satellite altitude and establishes the link among these findings and the Meissl scheme (Rummel and van Gelderen in Manusrcipta Geodaetica 20:379–385, 1995).  相似文献   

5.
A series of recent papers have introduced some explorative methods based on Ripley’s K-function (Ripley in J R Stat Soc B 39(2):172–212, 1977) analyzing the micro-geographical patterns of firms. Often the spatial heterogeneity of an area is handled by referring to a case–control design, in which spatial clusters occur as over-concentrations of firms belonging to a specific industry as opposed to the distribution of firms in the whole economy. Therefore, positive, or negative, spatial dependence between firms occurs when a specific sector of industry is seen to present a more aggregated pattern (or more dispersed) than is common in the economy as a whole. This approach has led to the development of relative measures of spatial concentration which, as a consequence, are not straightforwardly comparable across different economies. In this article, we explore a parametric approach based on the inhomogeneous K-function (Baddeley et al. in Statistica Nederlandica 54(3):329–350, 2000) that makes it possible to obtain an absolute measure of the industrial agglomeration that is also able to capture spatial heterogeneity. We provide an empirical application of the approach taken with regard to the spatial distribution of high-tech industries in Milan (Italy) in 2001.  相似文献   

6.
The aim of this study is to estimate the capabilities of forecasting the yield of wheat using an artificial neural network combined with multi-temporal satellite data acquired at high spatial resolution throughout the agricultural season in the optical and/or microwave domains. Reflectance (acquired by Formosat-2, and Spot 4–5 in the green, red, and near infrared wavelength) and multi-configuration backscattering coefficients (acquired by TerraSAR-X and Radarsat-2 in the X- and C-bands, at co- (abbreviated HH and VV) and cross-polarization states (abbreviated HV and VH)) constitute the input variable of the artificial neural networks, which are trained and validated on the successively acquired images, providing yield forecast in near real-time conditions. The study is based on data collected over 32 fields of wheat distributed over a study area located in southwestern France, near Toulouse. Among the tested sensor configurations, several satellite data appear useful for the yield forecasting throughout the agricultural season (showing coefficient of determination (R2) larger than 0.60 and a root mean square error (RMSE) lower than 9.1 quintals by hectare (q ha−1)): CVH, CHV, or the combined used of XHH and CHH, CHH and CHV, or green reflectance and CHH. Nevertheless, the best accurate forecast (R2 = 0.76 and RMSE = 7.0 q ha−1) is obtained longtime before the harvest (on day 98, during the elongation of stems) using the combination of co- and cross-polarized backscattering coefficients acquired in the C-band (CVV and CVH). These results highlight the high interest of using synthetic aperture radar (SAR) data instead of optical ones to early forecast the yield before the harvest of wheat.  相似文献   

7.
The LLL algorithm, introduced by Lenstra et al. (Math Ann 261:515–534, 1982), plays a key role in many fields of applied mathematics. In particular, it is used as an effective numerical tool for preconditioning the integer least-squares problems arising in high-precision geodetic positioning and Global Navigation Satellite Systems (GNSS). In 1992, Teunissen developed a method for solving these nearest-lattice point (NLP) problems. This method is referred to as Lambda (for Least-squares AMBiguity Decorrelation Adjustment). The preconditioning stage of Lambda corresponds to its decorrelation algorithm. From an epistemological point of view, the latter was devised through an innovative statistical approach completely independent of the LLL algorithm. Recent papers pointed out some similarities between the LLL algorithm and the Lambda-decorrelation algorithm. We try to clarify this point in the paper. We first introduce a parameter measuring the orthogonality defect of the integer basis in which the NLP problem is solved, the LLL-reduced basis of the LLL algorithm, or the $\Lambda $ -basis of the Lambda method. With regard to this problem, the potential qualities of these bases can then be compared. The $\Lambda $ -basis is built by working at the level of the variance-covariance matrix of the float solution, while the LLL-reduced basis is built by working at the level of its inverse. As a general rule, the orthogonality defect of the $\Lambda $ -basis is greater than that of the corresponding LLL-reduced basis; these bases are however very close to one another. To specify this tight relationship, we present a method that provides the dual LLL-reduced basis of a given $\Lambda $ -basis. As a consequence of this basic link, all the recent developments made on the LLL algorithm can be applied to the Lambda-decorrelation algorithm. This point is illustrated in a concrete manner: we present a parallel $\Lambda $ -type decorrelation algorithm derived from the parallel LLL algorithm of Luo and Qiao (Proceedings of the fourth international C $^*$ conference on computer science and software engineering. ACM Int Conf P Series. ACM Press, pp 93–101, 2012).  相似文献   

8.
We can map zenith wet delays onto precipitable water with a conversion factor, but in order to calculate the exact conversion factor, we must precisely calculate its key variable $T_\mathrm{m}$ . Yao et al. (J Geod 86:1125–1135, 2012. doi:10.1007/s00190-012-0568-1) established the first generation of global $T_\mathrm{m}$ model (GTm-I) with ground-based radiosonde data, but due to the lack of radiosonde data at sea, the model appears to be abnormal in some areas. Given that sea surface temperature varies less than that on land, and the GPT model and the Bevis $T_\mathrm{m}$ – $T_\mathrm{s}$ relationship are accurate enough to describe the surface temperature and $T_\mathrm{m}$ , this paper capitalizes on the GPT model and the Bevis $T_\mathrm{m}$ – $T_\mathrm{s}$ relationship to provide simulated $T_\mathrm{m}$ at sea, as a compensation for the lack of data. Combined with the $T_\mathrm{m}$ from radiosonde data, we recalculated the GTm model coefficients. The results show that this method not only improves the accuracy of the GTm model significantly at sea but also improves that on land, making the GTm model more stable and practically applicable.  相似文献   

9.
  相似文献   

10.
Reliable and accurate estimates of tropical forest above ground biomass (AGB) are important to reduce uncertainties in carbon budgeting. In the present study we estimated AGB of central Indian deciduous forests of Madhya Pradesh (M.P.) state, India, using Advanced Land Observing Satellite – Phased Array type L-band Synthetic Aperture Radar (ALOS-PALSAR) L-band data of year 2010 in conjunction with field based AGB estimates using empirical models. Digital numbers of gridded 1?×?1° dual polarization (HH & HV) PALSAR mosaics for the study area were converted to normalized radar cross section (sigma naught - σ0). A total of 415 sampling plots (0.1 ha) data collected over the study area during 2009–10 was used in the present study. Plot-level AGB estimates using volume equations representative to the study area were computed using field inventory data. The plot-level AGB estimates were empirically modeled with the PALSAR backscatter information in HH, HV and their ratios from different forest types of the study area. The HV backscatter information showed better relation with field based AGB estimates with a coefficient of determination (R2) of 0.509 which was used to estimate spatial AGB of the study area. Results suggested a total AGB of 367.4 Mt for forests of M.P. state. Further, validation of the model was carried out using observed vs. predicted AGB estimates, which suggested a root mean square error (RMSE) of ±19.32 t/ha. The model reported robust and defensible relation for observed vs. predicted AGB values of the study area.  相似文献   

11.
Effects of errors-in-variables on weighted least squares estimation   总被引：2，自引：1，他引：1  
Although total least squares (TLS) is more rigorous than the weighted least squares (LS) method to estimate the parameters in an errors-in-variables (EIV) model, it is computationally much more complicated than the weighted LS method. For some EIV problems, the TLS and weighted LS methods have been shown to produce practically negligible differences in the estimated parameters. To understand under what conditions we can safely use the usual weighted LS method, we systematically investigate the effects of the random errors of the design matrix on weighted LS adjustment. We derive the effects of EIV on the estimated quantities of geodetic interest, in particular, the model parameters, the variance–covariance matrix of the estimated parameters and the variance of unit weight. By simplifying our bias formulae, we can readily show that the corresponding statistical results obtained by Hodges and Moore (Appl Stat 21:185–195, 1972) and Davies and Hutton (Biometrika 62:383–391, 1975) are actually the special cases of our study. The theoretical analysis of bias has shown that the effect of random matrix on adjustment depends on the design matrix itself, the variance–covariance matrix of its elements and the model parameters. Using the derived formulae of bias, we can remove the effect of the random matrix from the weighted LS estimate and accordingly obtain the bias-corrected weighted LS estimate for the EIV model. We derive the bias of the weighted LS estimate of the variance of unit weight. The random errors of the design matrix can significantly affect the weighted LS estimate of the variance of unit weight. The theoretical analysis successfully explains all the anomalously large estimates of the variance of unit weight reported in the geodetic literature. We propose bias-corrected estimates for the variance of unit weight. Finally, we analyze two examples of coordinate transformation and climate change, which have shown that the bias-corrected weighted LS method can perform numerically as well as the weighted TLS method.  相似文献   

12.
Within the last few decades mangrove forests worldwide have been experiencing high annual rates of loss and many of those that remain have undergone considerable degradation. To understand the condition of these forests, various optical remote sensing platforms have been used to map and monitor these wetlands, including the use of these data for biophysical parameter mapping. For many mangrove forests a reliable source of optical imagery is not possible given their location in quasi-permanent cloud cover or smoke covered regions. In such cases it is recommended that Synthetic Aperture Radar (SAR) be considered. The purpose of this investigation was to examine the relationships between various ALOS-PALSAR modes, acquired from eight images, and mangrove biophysical parameter data collected from a black mangrove (Avicennia germinans) dominated forest that has experienced considerable degradation. In total, structural data were collected from 61 plots representing the four common stand types found in this degraded forest of the Mexican Pacific: tall healthy mangrove (n = 17), dwarf healthy mangrove (n = 15), poor condition mangrove (n = 13), and predominantly dead mangrove (n = 16).Based on backscatter coefficients, significant negative correlation coefficients were observed between filtered single polarization ALOS PALSAR (6.25 m) HH backscatter and Leaf Area Index (LAI). When the dead stands were excluded (n = 45) the strength of these relationships increased. Moreover, significant negative correlation coefficients were observed with stand height, Basal Area (BA) and to a lesser degree with stem density and mean DBH. With the coarser spatial resolution dual-polarization and quad polarization data (12.5 m) only a few, and weaker, correlation coefficients were calculated between the mangrove parameters and the filtered HH backscatter. However, significant negative values were once again calculated for the HH when the 16 dead mangrove stands were removed from the sample. Conversely, strong positive significant correlation coefficients were calculated between the cross-polarization HV backscatter and LAI when the dead mangrove stands were considered. Although fewer in comparison to the HH correlations, a number of VV backscatter based relationships with mangrove parameters were observed from the quad polarization mode and, to a lesser extent, with the one single VV polarization data.In addition to backscatter coefficients, stepwise multiple regression models of the mangrove biophysical parameter data were developed based on texture parameters derived from the grey level co-occurrence matrix (GLCM) of the ALOS data. A similar pattern to the backscatter relationships was observed for models based on the single polarization unfiltered data, with fairly strong coefficients of determination calculated for LAI and stem height when the dead stands were excluded. In contrast, similar coefficients of determination with biophysical parameters were observed for the dual and quad polarization multiple regression models when the dead stands were both included and excluded from the analyses. An estimated mangrove LAI map of the study area, derived from a multiple regression model of the quad polarization texture parameters, showed comparable spatial patterns of degradation to a map derived from higher spatial resolution optical satellite data.  相似文献   

13.
The vector assignment p-median problem (VAPMP) (Weaver and Church in Transp Sci 19(1):58–74, 1985) was one of the first location-allocation models developed to handle split assignment of a demand to multiple facilities. The underlying construct of the VAPMP has been subsequently used in a number of reliable facility location and backup location models. Although in many applications the chance that a facility fails may vary substantially with locations, many existing models have assumed a uniform failure probability across all sites. As an improvement, this paper proposes a new model, the expected p-median problem as a generalization of existing approaches by explicitly considering site-dependent failure probabilities. Multi-level closest assignment constraints and two efficient integer linear programming (ILP) formulations are introduced. While prior research generally concludes that similar problems are not integer-friendly and cannot be solved by ILP software, computational results show that our model can be used to solve medium-sized location problems optimally using existing ILP software. Moreover, the new model can be used to formulate other reliable or expected location problems with consideration of site-dependent failure probabilities.  相似文献   

14.
An Effective Model to Retrieve Soil Moisture from L- and C-Band SAR Data   总被引：1，自引：0，他引：1  
This study investigated an appropriate method for soil moisture retrieval from radar images and coincident ground measurements acquired over bare soil and sparsely vegetated regions. The adopted approach based on a single scattering integral equation method (IEM) was developed to establish the relationship between backscatter coefficient and surface soil parameters including volumetric soil moisture content and surface roughness. The performance of IEM in 0–7.6 cm is better than that in 0–20 cm. Moreover, IEM can simulate correctly the backscatter coefficients only for the root mean square (RMS) height s < 1.5 cm at C-band and s < 2.5 cm at L-band by using an exponential correlation function and for s > 1.5 cm at C-band and s > 2.5 cm at L-band by using Gaussian function. However, due to the difficulties involved in the parameterization of soil surface roughness, the estimated accuracy is not satisfactory for the inversion of IEM. This paper used a combined roughness parameter and Fresnel reflection coefficient to develop an empirical model. Simulations were performed to support experimental results and to highlight soil moisture content and surface roughness effects in different polarizations. Results showed that a good agreement was found between the IEM simulations and the SAR measurements over a wide range of soil moisture and surface roughness characteristics. The model had a significant operational advantage in soil moisture retrieval. The correlation coefficients were 77.03 % at L-band and 81.45 % at C-band with the RMSEs of 0.515 and 0.4996 dB, respectively. Additionally, this work offered insight into the required application accuracy of soil moisture retrieval at a large area of arid regions.  相似文献   

15.
Soil moisture estimation is considered to be one of the important parameters in hydrological studies. The extraction of information on near surface soil moisture from the synthetic aperture radar is well established. The available Advanced Synthetic Aperture Radar (ASAR) data onboard ENVISAT with multi-incidence and multi-polarization mode for soil moisture estimation on sloping terrain was investigated. Empirical models were developed to estimate near surface soil moisture in the fallow agricultural fields by incorporating the effects of surface roughness using multi-incidence angle ASAR data. Medium incidence angle (IS-4) with VV polarization of ASAR data had higher correlation coefficient to volumetric soil moisture content. The ratio of medium (IS-4) to high incidence (IS-6) angle could further reduce the effect of surface roughness. The effect of topography on the radar data is taken care by calculating local incidence angle derived from ASTER DEM data. The VV polarization in the sloping terrain provided better results in comparison to VH polarization.  相似文献   

16.
An approach for estimating soil moisture is presented and tested by using surface-temperature-based soil evaporation transfer coefficient (ha), a coefficient recently proposed through the equation ha = (Ts − Ta)/(Tsd − Ta), where Ts, Tsd, and Ta are land surface temperature (LST), reference soil (dry soil without evaporation) surface temperature, and air temperature respectively. Our analysis and controllable experiment indicated that ha closely related to soil moisture, and therefore, a relationship between field soil moisture and ha could be developed for soil moisture estimation. Field experiments were carried out to test the relationship between ha and soil moisture. Time series Aqua-MODIS images were acquired between 11 Sep. 2006 and 1 Nov. 2007. Then, MODIS derived ha and simultaneous measured soil moisture for different soil depths were used to establish the relations between the two variables. Results showed that there was a logarithmic relationship between soil moisture and ha (P < 0.01). These logarithmic models were further validated by introducing another ground-truth data gathered from 46 meteorological stations in Hebei Province. Good agreement was observed between the measured and estimated soil moisture with RMSE of 0.0374 cm3/cm3 and 0.0503 cm3/cm3 for surface energy balance method at two soil depths (10 cm and 20 cm), with RMSE of 0.0467 cm3/cm3 and 0.0581 cm3/cm3 for maximum temperature method at two soil depths. For vegetated surfaces, the ratio of ha and NDVI suggested to be considered. The proposed approach has a great potential for soil moisture and drought evaluation by remote sensing.  相似文献   

17.
A new classification parameter is developed using 1535 ERS-2 wave mode synthetic aperture radar (SAR) test imagettes to better differentiate homogeneous and inhomogeneous imagettes. The comparison between the new parameter (Min) and the previous one (Inhomo) (Schulz-Stellenfleth and Lehner, 2004) was done under varied threshold values of Inhomo. It is concluded that the performance of ‘Min’ is much better than ‘Inhomo’ when applying to the 1535 test imagettes. Furthermore, both Min and Inhomo are applied to nearly 1 million imagettes collected for the period from 1 September 1998 to 30 November 2000. The comparisons of the global inhomogeneous distribution between ‘Min’ and ‘Inhomo’ reveal that both the areas and percentage of inhomogeneity calculated by ‘Min’ are larger than that calculated by ‘Inhomo’. By analyzing the low wind speed distribution of HOAPS data, we found that low wind speed over the ocean is one of the key reasons for the inhomogeneity of SAR imagettes.  相似文献   

18.
Soil moisture is one of the most important parameter which controls the growth of the vegetation. For accurate data and sufficient information to increase food production, remote sensing technique is highly useful. This paper deals with the bistatic microwave response of spinach and spinach covered soil moisture at various growth stages on X-band if the frequency spectrum. The microwave response of spinach in different stages of growth have been studied in terms of scattering co-efficient (σ°). The look angle effect on σ° is observed for like polarization i.e. (VV-and-HH) only. A linear regression analysis has been done between the vegetation covered soil moisture and scattering co-efficient. It provides an idea that VV-polarization is more sensitive than HH-polarizalion for vegetation covered soil moisture and best suitable look angle for observing vegetation covered soil moisture is less than 40°(θ<40°).  相似文献   

19.
For more than six years, the Soil Moisture and Ocean Salinity (SMOS) mission has provided multi angular and full-polarization brightness temperature (TB) measurements at L-band. Geophysical products such as soil moisture (SM) and vegetation optical depth at nadir (τnad) are retrieved by an operational algorithm using TB observations at different angles of incidence and polarizations. However, the quality of the retrievals depends on several surface effects, such as vegetation, soil roughness and texture, etc. In the microwave forward emission model used in the retrievals (L-band Microwave Emission Model, L-MEB), soil roughness is modelled with a semi-empirical equation using four main parameters (Qr, Hr, Nrp, with p = H or V polarizations). At present, these parameters are calibrated with data provided by airborne studies and in situ measurements made at a local scale that is not necessarily representative of the large SMOS footprints (43 km on average) at global scale. In this study, we evaluate the impact of the calibrated values of Nrp and Hr on the SM and τnad retrievals based on SMOS TB measurements (SMOS Level 3 product) over the Soil Climate Analysis Network (SCAN) network located in North America over five years (2011–2015). In this study, Qr was set equal to zero and we assumed that NrH = NrV. The retrievals were performed by varying Nrp from −1 to 2 by steps of 1 and Hr from 0 to 0.6 by steps of 0.1. At satellite scale, the results show that combining vegetation and roughness effects in a single parameter provides the best results in terms of soil moisture retrievals, as evaluated against the in situ SM data. Even though our retrieval approach was very simplified, as we did not account for pixel heterogeneity, the accuracy we obtained in the SM retrievals was almost systematically better than those of the Level 3 product. Improved results were also obtained in terms of optical depth retrievals. These new results may have key consequences in terms of calibration of roughness effects within the algorithms of the SMOS (ESA) and the SMAP (NASA) space missions.  相似文献   

20.
目标分解技术在植被覆盖条件下土壤水分计算中的应用   总被引：6，自引：0，他引：6  
施建成  李震  李新武 《遥感学报》2002,6(6):412-415
目标分解技术利用协方差距阵的特征值和特征矢量，将极化雷达后向散射测量值分解为单向散射，双向散射和交叉极化散射三个分量，并建立了植被覆盖地表的一阶物理离散散射模型。通过分解的各分量与该模型的比较，建立重轨极化雷达测量数据估算土壤水分的方法，采用Washita‘92实验区多时相全极化L波段JPL/AIRSAR图像雷达测量数据，利用分解的散射测量值，我们评估了在同一入射角，单频（L波段），多路条件下，分解理论在进行土壤水分估计时减少植被影响的能力。结果表明利用目标分解理论和重轨极化雷达数据可以估算植被覆盖区域土壤水分的变化情况。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号