首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 406 毫秒
1.
从基本的双码交替二进制偏移栽波(AltBOC)调制模型出发,结合数学仿真深入研究双码AltBOC、标准AltBOC和恒定包络AltBOC调制原理;重点分析比较了标准Ait—BOC和恒定包络AltBOC调制技术的副载波特点、频谱特性及其对接收机设计产生的影响;利用查表法仿真实现无任何干扰情况下伽利略(Galileo)E5信号,进一步验证了将恒定包络AltBOC调制作为卫星导航信号调制方案的优势,为接收机设计中AltBOC信号的接收处理方式的确定提供了重要的理论依据。  相似文献   

2.
在导航接收机的伪距测量中,码跟踪精度起着重要作用,而码跟踪环路的性能由码鉴相器的鉴相曲线决定。本文首先介绍了BOC(1,1)信号的功率谱特性和自相关特性,然后通过仿真分析BOC(1,1)和BPSK(1)两种信号的非相干延迟锁定环的鉴相器输出和环路跟踪误差,得出两种信号在码跟踪性能上的差异。通过比较发现,BOC信号较BPSK信号在跟踪的鲁棒性和精度等方面具有显著优势。  相似文献   

3.
在Galileo系统建设和GPS现代化的进程中,为实现与BPSK(Bi-phase Shift Keying)的频谱分离,采用了BOC(Binary Offset Carrier)调制。BOC调制在码跟踪精度、多径抑制等方面比BPSK调制具有更好的性能,但其自相关函数的多相关峰特性使得在测距中可能产生偏差,因此,消除相关峰的模糊度是BOC信号接收中非常关键的问题。介绍了一种基于QBOC码的BOC信号码跟踪环路(“BOC十QBOC-BOC”),并推导出该环路码跟踪性能的解析表达式,最后的仿真结果验证了理论推导的正确性,可为BOC信号接收机的设计提供参考。  相似文献   

4.
在分析基于软件无线电全球定位系统(GPS)接收机结构的基础上,研究了GPS单频软件接收机的捕获和跟踪算法,并基于MATLAB平台在PC上仿真了GPS单频软件接收机样机。信号捕获采用基于快速傅里叶变换(FFT)的并行码相位搜捕算法;信号跟踪联合使用超前滞后非相干延迟锁定环和科斯塔斯环的跟踪环结构。采用实测数据对信号捕获、跟踪算法进行了分析和验证。结果表明:仿真的GPS单频软件接收机具备基本的基带信号处理功能。  相似文献   

5.
多径信号是GPS定位的主要误差源之一。码和载波跟踪环是GPS接收机的重要组成部分,它们直接决定了接收机的性能,因此当前多径消除技术研究的核心即是从跟踪环内部着手研究。本文仔细分析了GPS接收机信号跟踪环以及多径信号对跟踪精度的影响,对伪距码与载波相位多径误差进行了比较,并且通过仿真结果和图表阐明了码和载波相位多径误差之间的协同关系。  相似文献   

6.
针对高动态场景,单独的码环路很难实现跟踪,由于高动态载波跟踪的算法很成熟,通常应用载波跟踪结果对码环路进行辅助,针对窄体制信号,这种方法可以帮助消除码环的动态误差,但对宽体制信号来说,辅助力度减小。从高动态宽带信号码跟踪误差门限以及跟踪精度入手,分析了单独码跟踪算法的易失锁性,理论和仿真验证应用高动态载波跟踪结果辅助码跟踪算法的有效性,且具有高的跟踪精度。这为导航接收机的跟踪算法提供了理论依据。  相似文献   

7.
针对全球导航卫星系统(global navigation satellite system,GNSS)信号体制评估过程中,多径误差包络评估方法给出了多径误差的上界,并没有反映反射信号载波和子载波相位引入的码跟踪误差问题,提出了一种码跟踪多径误差非包络评估方法。该方法将反射信号的码相位延时映射到载波和子载波相位延时,为码跟踪多径误差提供了准确的理论值,而且避免了多径误差包络方法求包络曲线的过程。给出了该方法的理论表达式,对BPSK、AltBOC、MBOC和BOC信号进行了多径性能仿真,并与多径误差包络评估方法进行了对比。理论和仿真结果表明,本文方法能准确的估计码跟踪多径误差,为GNSS信号多径误差测量值提供有效的理论指导。  相似文献   

8.
针对高动态环境下普通GPS接收机跟踪环路容易失锁的问题,考虑到锁频环动态性能好、锁相环跟踪精度高的特点,实现了二阶锁频环辅助三阶锁相环的载波跟踪环(FPLL)。根据FPLL结构原理和误差分析理论,提出了一种FPLL环路的码相位和载波相位精度分析方法。借助GPS软件接收机平台,在Matlab环境下仿真实现了FPLL载波跟踪环,并利用Spirent GSS7700仿真器采集高动态GPS模拟信号对FPLL环路进行了测试。测试结果和精度分析表明,在导航信号的载噪比为40dB-Hz,加速度为26g,加加速度为9g/s的条件下,该高动态跟踪环路能够达到码相位1.31m(1σ),载波相位为4.24×10-3 m/s(1σ)的跟踪精度。  相似文献   

9.
为了满足高动态用户及强干扰条件下的应用需求,提出了一种基于卫星信号矢量跟踪的SINS/GPS深组合导航方法,设计了基于FPGA硬件平台的实施方案。利用组合卡尔曼滤波器反馈回路取代了传统接收机中独立、并行的跟踪环路,能够同时完成所有可视卫星信号的跟踪和导航信息处理;通过矢量跟踪算法对所有可视卫星信号进行集中处理,能够增强跟踪通道对信号载噪比变化的适应能力,从而提高接收机在强干扰或信号中断条件下的跟踪性能;根据SINS导航参数和星历信息推测GPS伪码相位和多普勒频移等参数,用以辅助卫星信号的捕获和跟踪,能够大大缩短接收机的搜索捕获时间,并增强接收机在高动态条件下的跟踪性能。基于矢量跟踪的深组合方法不仅在GPS信号短暂中断期间,能够保证系统的导航精度和可靠性,而且在强干扰环境中能够维持较好的伪码相位和载波频率跟踪性能。  相似文献   

10.
作为研制各类导航系统接收机设备的一项关键技术,窄相关技术的优化设计可以有效抑制由热噪声带来的跟踪误差,最终提高伪码的测量精度。在介绍了窄相关技术的基本原理和实现方法的基础上,研究了窄相关技术提高伪码跟踪精度的理论,并通过Matlab仿真平台对窄相关技术进行了仿真分析。  相似文献   

11.
Compared with the traditional GPS L1 C/A BPSK-R(1) signal, wideband global navigation satellite system (GNSS) signals suffer more severe distortion due to ionospheric dispersion. Ionospheric dispersion inevitably introduces additional errors in pseudorange and carrier phase observations that cannot be readily eliminated by traditional methods. Researchers have reported power losses, waveform ripples, correlation peak asymmetries, and carrier phase shifts caused by ionospheric dispersion. We analyze the code tracking bias induced by ionospheric dispersion and propose an efficient all-pass filter to compensate the corresponding nonlinear group delay over the signal bandwidth. The filter is constructed in a cascaded biquad form based on the estimated total electron content (TEC). The effects of TEC accuracy, filter order, and fraction parameter on the filter fitting error are explored. Taking the AltBOC(15,10) signal as an example, we compare the time domain signal waveforms, correlation peaks, code tracking biases, and carrier phase biases with and without this all-pass filter and demonstrate that the proposed delay-equalization all-pass filter is a potential solution to ionospheric dispersion compensation and mitigation of observation biases for wideband GNSS signals.  相似文献   

12.
The world of global navigation satellite systems has been enhanced with several new or improved signals in space aiming to optimize accuracy, reliability, navigation solution, and interoperability between different constellations. However, such developments bring various challenges to the receivers’ designers. For example, acquisition and tracking stages turn into more complex processes while handling the increasing bandwidth requires additional processing power. In this context, we study the code tracking of Galileo E5ab in a full band or of only one of its components, i.e., either E5a or E5b. More specifically, an architecture for tracking the E5 pilot channel as an AltBOC(15,10) or BPSK(10) modulation is introduced, and the performance of well-known discriminator types is analyzed using analytical derivations and simulations of linearity and stability regions, thermal noise tracking errors, multipath error envelopes and tracking thresholds. Different parameters, such as the front-end filter bandwidth, the early/late chip spacing, un-normalized and normalized discriminators, are taken into consideration. The results obtained are used to illustrate the main advantages and drawbacks of tracking the E5 signal as well as to help defining the main tracking loop parameters for an enhanced performance.  相似文献   

13.
建立了导航接收机码跟踪延迟锁定环的数学模型,讨论了DP和EMLP鉴别器在不同信号、不同前端滤波器带宽的鉴别曲线特性,阐述了BOC调制模糊跟踪产生的原因。针对BOC调制信号的模糊跟踪问题,从BOC调制的机理出发,将BOC调制分成伪码和副栽波两部分分析,阐述了一种新的鉴别器设计。实验表明:新鉴别器设计,鉴别曲线线性跟踪区域斜率最高为9,可实现BOC调制的无模糊跟踪。  相似文献   

14.
The European Galileo system offers one dedicated signal that is superior to all other signals currently available in space, namely the broadband signal E5. This signal has a bandwidth of at least 51 MHz using an AltBOC modulation. It features a code range noise at centimeter level. Additionally, the impact of multipath effects on this signal is significantly lower compared to all other available GNSS signals. These unique features of Galileo E5 drastically improve the precision of code range measurements and hence enable precise single-frequency positioning. Certain scientific and non-scientific applications in the positioning domain could likely benefit from the exploitation of E5 measurements. A positioning approach based on an additive combination of code range and carrier phase measurements (CPC—“code-plus-carrier”) to eliminate the ionospheric delay could be used to perform precise positioning over long distances. Unfortunately, this derived observable contains the ambiguity term as an additional unknown what normally requires longer observation windows in order to allow sufficient convergence of the ambiguity parameters. For this reason, a rapid convergence algorithm based on Kalman filtering was implemented in addition to the conventional CPC approach that is also discussed. The CPC-based results yield a positioning precision of 2–5 cm after a convergence time of about 3 h. The rapid convergence filter allows fixing the ambiguity terms within a few minutes, and the obtained position results are at the sub-decimeter level. Regarding one selected test, real data from Galileo experimental satellite GIOVE A were used in order to confirm our assumptions. However, since the current Galileo constellation is not sufficient for real-world positioning trials yet, all major results are based on simulated data.  相似文献   

15.
With the proposed new GNSS signals, enhanced navigation performance is expected in both civil and military applications. However, these new signals introduce the difficulty of combining multiple signal components into a constant-envelope signal. For the Compass B1 band, the problem is to multiplex a QPSK(2) signal and a new multiplexed binary offset carrier (MBOC) signal with a center frequency difference of 14.322 MHz. One approach for multiplexing spreading codes is the phase-optimized constant-envelope transmission (POCET) method proposed for the GPS L1 band. However, only binary spreading codes are considered in POCET. We first generalize the POCET method as a multilevel POCET (MPOCET) algorithm for multilevel coded signals. A new implementation of the alternative binary offset carrier (AltBOC) generator is derived from MPOCET. Secondly, the multiplexing problem for Compass is modeled by MPOCET. Multilevel subcarriers of AltBOC are adopted in the model. As a result, an 8-PSK unbalanced AltBOC (UAltBOC) modulation, which has a QPSK(2) signal at the lower sideband and a TMBOC signal at the upper sideband, is obtained. Simulations for signal model validation and power spectrum analysis are conducted. Numerical results indicate that UAltBOC successfully combines the QPSK and TMBOC signals with only 0.16-dB additional combining loss compared to AltBOC. The proposed MPOCET technique is demonstrated as a unified multiplexing method for navigation signals.  相似文献   

16.
多径的存在会给全球导航卫星系统的接收机带来较大的定位误差。因此,高精度的接收机须对多径信号进行抑制。针对目前常用的多径抑制方法的优缺点,提出了一种基于多门延迟和曲线拟合的多径抑制方法。该方法通过多门延迟来重塑伪码的自相关函数,用于找到直射信号的伪码真实位置和接收机码跟踪环路鉴别结果之间的偏差,进一步通过曲线拟合方法更加精确地计算出该偏差,最后将该偏差通过开环方法补偿给伪距计算,使得接收机在不改变环路跟踪性能和抗动态干扰性能的前提下实现定位性能的提升。仿真结果表明新算法在前端带宽的影响下对短、中长多径均能进行有效地抑制。   相似文献   

17.
针对北斗卫星导航系统/惯性导航系统(BDS/INS)的深组合定位系统,提出了一种利用惯性导航系统(INS)辅助B1C正交分量的信号跟踪算法,以解决定位过程中信号较弱致深组合定位系统失锁的问题. 该算法使用了考虑INS数据的卡尔曼滤波算法,并同时利用导频分量和数据分量构成本地码,对信号进行跟踪. 由该算法对实测数据计算,并利用传统算法进行对比,可以得出在弱信号的环境下跟踪环路较为稳定,伪距精度较高.   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号