共查询到20条相似文献，搜索用时 15 毫秒
1.
地震诱导电磁现象是国内外地学领域十分关注的前沿问题,前人对地震波和电磁场耦合波场的认识主要是基于规则模型获得的.为研究含起伏地表和地下界面的地层中震电波场激发、传播特性,本文采用有限元软件COMSOL Multiphysics模拟点震源激发的电磁场.首先给出频率域二维SHTE模式震电耦合方程组,然后利用COMSOL软件建立计算模型,并求解出点力源激发震电波场的频率域响应,最后利用FFT变换得到地震波场和电磁场的时间域波形.模拟结果表明,震电波场中存在三种类型的电磁信号,第一种是震源直接激发的电磁波;第二种是地震波在分界面处激发的电磁波(包括自由表面、地下不同介质分界面);第三种是伴随地震波的同震信号,前两种电磁波比地震波更早到达远处观测台站,对地震预警有重要意义.此外,研究还发现:当地震波传播至地表并沿着地表传播时,在地表附近空气层中同样记录到了伴随地震波传播的电磁扰动信号,该信号与相同水平源距条件下、地下观测点接收到的电磁信号相同,这与前人的一些观测结果相符.本文研究结果为今后地震电磁信号的解释提供了理论证据. 相似文献
2.
Using numerical modelling, we investigate the evolution of seismoelectric effects induced by seismic excitation in spatially confined lithological units. Typical geometries represent clay lenses embedded in an aquifer or petroleum deposits in a host rock. In fluid‐saturated rocks, seismic waves can generate electromagnetic fields due to electrokinetic coupling mechanisms associated with such processes in the vicinity of the fluid‐mineral interface. Two seismoelectric phenomena are investigated: (1) the co‐seismic field associated with the seismic displacement at each point in a subsurface and (2) the interface response generated at layer boundaries. Our modelling uses a simplified time‐domain formulation of the coupled problem and an efficient 2D finite‐element implementation. To gain insight into the morphogenetic field behaviour of the seismoelectric effects, several numerical simulations for various target geometries were treated. Accordingly, we varied both the thickness of the confined units and the value of the electrical bulk conductivity in porous media. Analysis of these effects shows differences between interface responses for electrically conductive versus resistive units. So the pertinent contrast in electrical bulk conductivity controls the shape and structure of these seismoelectric conversion patterns. Moreover, the seismoelectric interface response captures both the petrophysical and geometrical characteristics of the geological unit. These models demonstrate the value of using seismoelectric interface response for reservoir characterization in either hydrogeological or hydrocarbon exploration studies. 相似文献
3.
可控源海洋电磁勘探(MCSEM)中空气波对海底电磁响应的影响已为业界所熟知,且已提出了多种压制方法.然而,由于空气波与海水层中其它信号相互作用的复杂性,至今其作用机理及对有效信号的影响方式尚未完全清楚,这也阻碍了浅水域MCSEM油气勘探的应用.本文在前人研究的基础上, 基于一维层状介质的电磁位和电磁场分析,采用电磁场的模式分解理论导出了空气、海水层和海底地层之间的相互作用关系.分析了MCSEM电磁响应的影响因素和空气波的作用机理.以无限水深假想模型、三层介质模型和四层介质模型为基础,导出了水平电偶极子(HED)的横电(TE)和横磁(TM)模式的电磁场关系,分析显示了前人提出的上下行波分离进行空气波压制所存在的缺陷.通过理论和数值模拟知道, 利用横电(TE)和横磁(TM)模式受空气相互作用影响的差异和电磁场水平分量与垂直分量受空气层相互作用影响程度的不同可减弱空气波对有效信号的影响,这将有助于实现浅水域海洋电磁勘探数据的有效利用. 相似文献
4.
孔隙地层中存在着动电耦合现象,弹性波作用在声阻抗或者电化学性质差异地层会产生辐射电磁波.本文探讨了随钻条件下,利用孔隙地层中的动电耦合效应探测井旁地质体的可行性.为此模拟了井外存在声阻抗差异和电化学差异界面时声波诱导的辐射电场响应特征.求出柱坐标下介质中声场和电场函数表达式,由此计算并比较了均匀介质和弹性差异界面情况下井中接收到的电场.发现随钻条件下,井外的弹性差异界面会产生以光速传播的辐射电磁波.该电磁波反映了井外地质信息,并先于井中直达声波的伴随电磁场到达接收器,因而可以直接观测到.此外,还发现界面辐射电磁波可以用来探测油、水等电化学性质差异大而弹性阻抗差异小的界面;声源频率以及界面两侧地层性质差异程度是辐射电磁波幅度的影响因素. 相似文献
5.
震电测井的现场试验中测得电磁首波幅值大于伴随电场幅值,这种情况在前人的理论模拟和模型井测量中从未出现.本文研究矿化度界面对震电测井波场的影响,基于Pride方程和边界连续条件模拟了震电测井波场,其中井外孔隙地层可以视为均匀的或者是径向分层的.计算结果表明:对于均匀孔隙地层,当井内流体矿化度大于井外地层孔隙流体矿化度时,电磁首波幅值可以比伴随斯通利波的电场幅值还大;井内流体矿化度与井外地层孔隙流体矿化度的比值越大,电磁首波相对伴随斯通利波的电场的幅值越大.对于径向分层地层,当井内流体矿化度大于内层地层的孔隙流体矿化度时,电磁首波幅值可以比伴随斯通利波的电场幅值还大;当外层地层矿化度小于内层地层矿化度时,电磁首波幅值可以比伴随斯通利波的电场幅值还大;增加内层地层厚度,电场全波幅值减小,电磁首波相对伴随电场的幅值减小.本文的模拟结果表明,震电测井中确实会出现电磁首波幅值比伴随电场幅值还大的情况,这对于解释震电测井的测量结果具有指导意义. 相似文献
6.
本文研究声电效应测井波场的有限差分模拟算法.忽略井外地层中诱导电磁场对孔隙弹性波的影响,将求解动电耦合波方程组的问题解耦,先计算孔隙弹性波,再计算其诱导电磁场.基于轴对称柱坐标系下的速度-应力交错网格,采用时域有限差分计算井孔流体声波和井外地层孔隙弹性波.将电磁场近似看作似稳场,基于轴对称柱坐标系下的5点式有限差分网格,求解不同时刻的电位Poisson方程,计算诱导电场.结果表明:本文算法可准确模拟频率6.0 kHz的声电效应测井全波;在声波测井频率范围内,电导率、动电耦合系数和动态渗透率的低频近似对伴随电磁场的计算影响不大;地层水平界面导致伴随反射斯通利波的电场和显著的界面电磁波,后者对于探测地层界面具有潜在的应用价值. 相似文献
7.
探索基于孔隙介质动电效应的随钻测井新方法是当前测井勘探领域的热点研究之一.本文针对随钻测井情况下的动(声)-电转换机理,在砂岩模型井中进行了多极源(单/偶/四极源)随钻动电测井实验研究,记录了井中声波激发动电转换波场的时域波形,给出了各分波的时间-速度图,并与多极源随钻声波测井数据进行对比,结果表明:钻铤波诱导的动电转换信号在随钻动电测井全波中的相对幅度显著降低,从而可准确提取到地层声波的传播速度,实现了利用随钻动电测井方法测量地层波速的目的,验证了随钻动电测井技术可有效抑制钻铤波的思想.本文还进一步分析了钻铤波的动电耦合特性,并结合有机玻璃模型井中随钻动电测井和无井孔模型下的随钻声波测量,研究了伴随钻铤波电场信号的传播特性和衰减规律,深入探讨了随钻动电测井全波中钻铤波被削弱的原因,并给出了定量的实验数据分析,为随钻动电测井理论模拟的解释提供有效实验数据支撑. 相似文献
8.
为了探索我国海域油气和水合物等高阻目标体CSEM勘探的可行性和方法技术,本文研究了在海水中水平电性源激励下有限水深海洋地电模型的频率域电磁响应,为进一步的1D和3D仿真计算奠定了理论基础.在推导电磁响应公式时,首先给出了各层介质的Lorentz势,然后根据Coulomb势与Lorentz势的关系,得到了各层介质的Coulomb势.各层介质中的电磁场均可以由Lorentz势或者Coulomb势计算得到,但在有限元计算时Coulomb势具有优势.长导线源的电磁场和势函数可以由电偶源的电磁场和势函数沿导线长度积分得到.文中具体给出了海水中水平电偶源和长导线源在海水层的电磁场公式,并根据该公式计算了不同水深环境下海底表面的电磁场分布,分析了海水深度对海底油气储层电磁异常的影响.结果表明,随着水深减小,异常幅度和形态特征发生明显变化.当水深很浅时(如50 m),只有同线方向的Ex和Ez两个电场分量存在明显异常.最后,以两个已知海底油田为例,计算了不同水深环境下可观测到的电场异常,展示了电性源频率域CSEM在海底勘探中(包括浅海环境)的良好应用前景.对于该方法实用化过程中还需进一步解决的问题,文中结尾部分也进行了初步探讨. 相似文献
9.
The marine controlled source electromagnetic (CSEM) technique has been adopted by the hydrocarbon industry to characterize the resistivity of targets identified from seismic data prior to drilling. Over the years, marine controlled source electromagnetic has matured to the point that four‐dimensional or time lapse surveys and monitoring could be applied to hydrocarbon reservoirs in production, or to monitor the sequestration of carbon dioxide. Marine controlled source electromagnetic surveys have also been used to target shallow resistors such as gas hydrates. These novel uses of the technique require very well constrained transmitter and receiver geometry in order to make meaningful and accurate geologic interpretations of the data. Current navigation in marine controlled source electromagnetic surveys utilize a long base line, or a short base line, acoustic navigation system to locate the transmitter and seafloor receivers. If these systems fail, then rudimentary navigation is possible by assuming the transmitter follows in the ship's track. However, these navigational assumptions are insufficient to capture the detailed orientation and position of the transmitter required for both shallow targets and repeat surveys. In circumstances when acoustic navigation systems fail we propose the use of an inversion algorithm that solves for transmitter geometry. This algorithm utilizes the transmitter's electromagnetic dipole radiation pattern as recorded by stationary, close range (<1000 m), receivers in order to model the geometry of the transmitter. We test the code with a synthetic model and validate it with data from a well navigated controlled source electromagnetic survey over the Scarborough gas field in Australia. 相似文献
10.
The phenomenon of acoustic waves inducing electric fields in porous media is called the seismoelectric effect. Earlier investigators proposed the usage of seismoelectric effect for well logging. Soil texture has a strong influence on the coupled wave fields during shallow surface explorations. In this article, we study the borehole pure shear‐horizontal wave and the coupling transverse‐electric field (acoustic–electrical coupling wave fields) in the partially saturated soil. Combined with related theories, we expand the formation parameters to partially saturated forms and discuss the influence of soil texture conditions on the seismoelectric wave fields. The results show that the elastic and electrical properties of porous media are sensitive to water saturation. The compositions of the acoustic and electric fields for different soil textures do not change, but the waveforms differ. We also use the secant integral method to simulate the interface‐converted electromagnetic waves. The results show that interface response strength is greatly influenced by soil texture. In addition, considering the sensitivity of the inducing electric field to fluid salinity, we also simulate the time‐domain waveforms of electric field for different pore fluid salinity levels. The results show that as the salinity increases, the electric field amplitude decreases monotonically. The above conclusions have certain significance for the application of borehole shear wave and its coupled electric fields for resource exploration, saturation assessment and groundwater pollution monitoring. 相似文献
11.
An improved interpolation scheme is presented for 2.5-dimensional marine controlled-source electromagnetic forward modelling. For the marine controlled-source electromagnetic method, due to the resistivity contrast between the seawater and seafloor sedimentary layers, it is difficult to compute the electromagnetic fields accurately at receivers, which are usually located at the seafloor. In this study, the 2.5-dimensional controlled-source electromagnetic responses are simulated by the staggered finite-difference method. The secondary-field approach is used to avoid the source singularities, and the one-dimensional layered background model is used for calculating the primary fields excited by the source quasi-analytically. The interpolation of electromagnetic fields at the cell nodes for the whole computational domain to the receiver locations is discussed in detail. Numerical tests indicate that the improved interpolation developed is more accurate for simulating the electromagnetic responses at receivers located at the seafloor, compared with the linear or rigorous interpolation. 相似文献
12.
B. URSIN 《Geophysical Prospecting》1988,36(1):1-5
Elastic, acoustic and electromagnetic waves in media consisting of vertically inhomogeneous layers are considered in a common formulation. The spectral function of a vertically inhomogeneous medium is the downward energy flux due to an impulsive source at the top of the first layer. A propagation-invariant form is used to derive several identities for the reflection and transmission matrices. When the top layer is bounded by a free surface, one of the expressions reduces to a formula derived by Kunetz for the one-dimensional wave equation. A source radiating upwards and downwards gives a discontinuity in the propagation-invariant form which is equal to the source energy. A new formula is derived for when the source is located just beneath the top interface of the layers. 相似文献
13.
The construction of S-wave velocity models of marine sediments down to hundreds of meters below the seafloor is important
in a number of disciplines. One of the most significant trends in marine geophysics is to use interface waves to estimate
shallow shear velocities which play an important role in determining the shallow crustal structure. In marine settings, the
waves trapped near the fluid–solid interface are called Scholte waves, and this is the subject of the study. In 1998, there
were experiments on the Ninetyeast Ridge (Central Indian Ocean) to study the shallow seismic structure at the drilled site.
The data were acquired by both ocean bottom seismometer and ocean bottom hydrophone. A new type of seafloor implosion sources
has been used in this experiment, which successfully excited fast and high frequency (>500 Hz) body waves and slow, intermediate
frequency (<20 Hz) Scholte waves. The fundamental and first higher mode Scholte waves have both been excited by the implosion
source. Here, the Scholte waves are investigated with a full waveform modeling and a group velocity inversion approach. Shear
wave velocities for the uppermost layers of the region are inferred and results from the different methods are compared. We
find that the full waveform modeling is important to understand the intrinsic attenuation of the Scholte waves between 1 and
20 Hz. The modeling shows that the S-wave velocity varies from 195 to 350 m/s in the first 16 m of the uppermost layer. Depths
levels of high S-wave impedance contrasts compare well to the layer depth derived from a P-wave analysis as well as from drilling
data. As expected, the P- to S-wave velocity ratio is very high in the uppermost 16 m of the seafloor and the Poisson ratio
is nearly 0.5. Depth levels of high S-wave impedance contrasts are comparable to the layer depth derived from drilling data. 相似文献
14.
The seismoelectric effects induced from the coupling of the seismic wave field and the electromagnetic field depend on the physical properties of the reservoir rocks. We built an experimental apparatus to measure the seismoelectric effects in saturated sandstone samples. We recorded the seismoelectric signals induced by P-waves and studied the attenuation of the seismoelectric signals induced at the sandstone interface. The analysis of the seismoelectric effects suggests that the minimization of the potential difference between the reference potential and the baseline potential of the seismoelectric disturbance area is critical to the accuracy of the seismoelectric measurements and greatly improves the detectability of the seismoelectric signals. The experimental results confirmed that the seismoelectric coupling of the seismic wave field and the electromagnetic field is induced when seismic wave propagating in a fluid-saturated porous medium. The amplitudes of the seismoelectric signals decrease linearly with increasing distance between the source and the interface, and decay exponentially with increasing distance between the receiver and the interface. The seismoelectric response of sandstone samples with different permeabilities suggests that the seismoelectric response is directly related to permeability, which should help obtaining the permeability of reservoirs in the future. 相似文献
15.
Point source reflection/transmission responses from planar interfaces based on the Sommerfeld-Weyl integral are causal and are given in the form of a solution integral with an infinite integration limit. They can be simply transformed to integrals with a finite limit by an approach that takes into account causality as well as time-symmetry aspects. To introduce the fundamental principles involved, the transformation is applied to the simple case of a point-source response from a planar acoustic interface. For a point source above a planar interface separating an upper and lower acoustic half-space of velocity c1and c2 the inhomogeneous plane waves in the Sommerfeld-Weyl source representation do not contribute to the final result if c1≤c2 and only a limited spectrum of inhomogeneous plane waves comes into play if c1c2. 相似文献
16.
幅度大的钻铤波掩盖地层信号是困扰随钻声波测井技术的难题,认识钻铤波特性对于消除或有效降低钻铤波至关重要.记录岩石动电效应引起电磁场的随钻动电测井,被认为有望彻底解决钻铤波干扰问题.本文采用有限差分法,模拟不同钻铤、不同井孔结构的随钻声场,对比分析了单极源钻铤波的传播特性,阐明存在伴随钻铤波动电信号的原因.结果表明:钻铤声波在沿钻铤传播时向外部介质辐射能量,透过井壁进入地层的具有视钻铤波速度的声波,与地层纵横波一样可发生动电转化,因而可导致随钻动电测井时产生钻铤波速度的电磁信号.计算还表明,高频情况下,随钻声波测井钻铤波呈现两阶模式:具有低频截止频率的高阶钻铤波幅度较小,其速度略低于钻铤纵波速度;无截止频率的低阶钻铤波幅度较大,其波速在高频时甚至低于钻铤横波速度.这种频散特性和多阶模式特性,是径向多分层开波导结构的导波属性. 相似文献
17.
用Biot介质参数说明了波达波夫震电波方程组中弹性动力学 参数的含义，解释了第一类和第二类震电效应的意义，在忽略第一类震电效应条件下将该方 程组与Pride方程组进行比较，说明了二者在描述第二类震电效应方面的异同点. 同时指出 ：波达波夫方程组忽略了流体与固体的耦合质量；方程中的黏性耗散项丢掉了一个孔隙度因 子，依据该方程组计算出的弹性波和转换电场的幅度将偏大；边界条件之一存在错误，会影 响对波在界面上的反射透射规律的描述. 相似文献
18.
19.
RESEARCH ON TIME-DISTANCE INTERPRETATION OF MULTIPLES AND GHOSTS BASED ON MARINE SEISMIC DATA 
下载免费PDF全文
下载免费PDF全文 Currently, the study on the active fault in the land areas is relatively mature, while there is still lack of detection and research on active faults in the sea areas. Marine exploration, which is different from land areas, has a prominent problem due to the existence of strong reflecting interfaces such as water surface and seafloor in the sea, thus the recording is often accompanied by interference of multiples on seafloor reflections. In addition, because of the characteristics of marine seismic exploration, the source exciting in the water and the geophone receiving in the water, ghost wave usually can be recorded simultaneously during the reflected wave propagation. This phenomenon makes it difficult to distinguish the effective waves and the noise, and has always plagued the data and seriously affects the quality of records. In the offshore and other regions of complex structures, such as inclined interfaces, it is difficult to eliminate the interference of multiples accurately by traditional multiples suppression methods, which are based on the horizontal interface assumption. This paper combines the sea area seismic data and its acquisition method, uses simplified model to simulate the multiples based on the time-distance analysis of multiples and their ghost wave in inclined interface. The time-distance characteristics of the multiples and their ghost waves from different interfaces(including the inclined interface)are obtained, and they are consistent with the actual records. The multiples time-distance simulation can help to distinguish the causes of reflected waves, summarize the multiple-wave time-distance characteristics from different interfaces(including inclined interfaces), and analyze the relationship between the characteristics of multiple waves and primary waves. In particular, this simulation has a significant effect on characterizing the internal multiples that are difficult to identify due to inconspicuous periodicity and the multiples of the inclined interface which present the phenomenon that the vertex of the time-distance curve is shifted. On this basis, relying on the time-distance analysis of ghost wave, we analyze the travel time difference characteristics between reflected waves and their accompanying ghost waves. The differences of the travel time characteristics of different orders ghost wave and reflected wave are summarized and the symmetry of the travel time difference between inclined interface and horizontal interface of ghost waves and reflected waves is analyzed. We simulate the distraction of the ghost wave event with the event of the reflected wave and analyze the influence of the ghost wave on the sea area seismic records. These results can improve the practical interpretation of seismic data. At last, the time-distance information is used to synthesize sea area seismic records, which can help us carry out the effective data processing and understand the characteristics of the time-distance and velocity of multiples in different interfaces and the layer artifact caused by multiples. This study combines the time-distance simulation of multiples and their ghost wave with conventional seismic data processing to analyze the pre-stack and post-stack features of multiple waves and their ghost waves in the seismic records of the sea area. The results of this study are conducive to the effective identification of multiples in seismic records in the sea, provide a theoretical basis for multi-wave suppression and prediction, and may facilitate the future study of sea-area seismic activity detection. 相似文献
20.
Trans‐dimensional Bayesian inversion of controlled‐source electromagnetic data in the German North Sea 下载免费PDF全文
下载免费PDF全文 Romina A. S. Gehrmann Jan Dettmer Katrin Schwalenberg Martin Engels Stan E. Dosso Asli Özmaral 《Geophysical Prospecting》2015,63(6):1314-1333
This paper presents the first controlled‐source electromagnetic survey carried out in the German North Sea with a recently developed seafloor‐towed electrical dipole–dipole system, i.e., HYDRA II. Controlled‐source electromagnetic data are measured, processed, and inverted in the time domain to estimate an electrical resistivity model of the sub‐seafloor. The controlled‐source electromagnetic survey targeted a shallow, phase‐reversed, seismic reflector, which potentially indicates free gas. To compare the resistivity model to reflection seismic data and draw a combined interpretation, we apply a trans‐dimensional Bayesian inversion that estimates model parameters and uncertainties, and samples probabilistically over the number of layers of the resistivity model. The controlled‐source electromagnetic data errors show time‐varying correlations, and we therefore apply a non‐Toeplitz data covariance matrix in the inversion that is estimated from residual analysis. The geological interpretation drawn from controlled‐source electromagnetic inversion results and borehole and reflection seismic data yield resistivities of ～1 Ωm at the seafloor, which are typical for fine‐grained marine deposits, whereas resistivities below ～20 mbsf increase to 2–4 Ωm and can be related to a transition from fine‐grained (Holocene age) to unsorted, coarse‐grained, and compacted glacial sediments (Pleistocene age). Interface depths from controlled‐source electromagnetic inversion generally match the seismic reflector related to the contrast between the different depositional environments. Resistivities decrease again at greater depths to ～1 Ωm with a minimum resistivity at ～300 mbsf where a seismic reflector (that marks a major flooding surface of late Miocene age) correlates with an increased gamma‐ray count, indicating an increased amount of fine‐grained sediments. We suggest that the grain size may have a major impact on the electrical resistivity of the sediment with lower resistivities for fine‐grained sediments. Concerning the phase‐reversed seismic reflector that was targeted by the survey, controlled‐source electromagnetic inversion results yield no indication for free gas below it as resistivities are generally elevated above the reflector. We suggest that the elevated resistivities are caused by an overall decrease in porosity in the glacial sediments and that the seismic reflector could be caused by an impedance contrast at a thin low‐velocity layer. Controlled‐source electromagnetic interface depths near the reflector are quite uncertain and variable. We conclude that the seismic interface cannot be resolved with the controlled‐source electromagnetic data, but the thickness of the corresponding resistive layer follows the trend of the reflector that is inclined towards the west. 相似文献