共查询到20条相似文献，搜索用时 31 毫秒
1.
A pragmatic strain-softening constitutive model, which is based on Modified Cam Clay, was applied to the simulation of the progressive failure of an embankment constructed on a deposit of sensitive (strain-softening) clay in Saga, Japan. A comparison of the predictions for this case indicates that if softening is ignored, only relatively small deflections and consolidation settlements are predicted, especially after construction. In contrast, for the case where softening is included in the analysis, progressive failure within the clay induces large shear deformations and finally failure of the embankment is predicted. This comparison suggests that softening-induced progressive failure should be considered in the design of embankments on such soils, and the residual strength of the deposit may have an important influence on the overall factor of safety of the construction. Detailed analyses of predicted excess pore water pressures, shear strains and shear stress levels in the ground indicate that considering the strain-softening process: (a) is associated with the buildup of excess pore water pressure; (b) promotes strain localization; and (c) results generally in a larger zone of soil involved in the failure. 相似文献
2.
A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
3.
《Geomechanics and Geoengineering》2013,8(2):131-146
The numerical challenges that arise in modelling shear bands in soft sensitive (SS) clays have not yet been fully resolved. Convincing and well-accepted solutions have yet to be found. This paper presents some novel information related to the shear band phenomenon in SS clays. In this study, the hypothesis is that the generation and dissipation of excess pore pressure from shear bands could regularise the strain softening and result in a mesh independent shear band thickness. The generation and dissipation of excess pressure is modelled by a coupled consolidation process. The simulation aims at modelling two counteracting mechanisms in the SS clay. First, the shear band narrows because of strain softening. Second, the internal pore water pressure drainage reduces the rate of strain softening. This counteracting mechanism provides an inherent regularisation technique for SS clays. This study presents some numerical results involving these two counteracting mechanisms. This study also shows that an inherent internal parameter applicable for SS clays can be defined by the ratio between soil permeability and the applied strain rate. In the case of SS clays, the range of this parameter varies from 0 to 0.0002 mm. 相似文献
4.
原状和重塑海洋粘土经历动载后的静强度衰减 总被引：5，自引：0，他引：5
根据海洋粉质粘土原状和重塑土样的动三轴试验结果, 比较和分析了两种土样应力、应变、孔隙水压力和不排水抗剪强度行为, 得到了土样的静不排水抗剪强度衰减与波浪荷载作用下土样产生的动应变以及平均累积孔压之间的关系。 并将波浪荷载作用使土样内孔压升高, 有效应力降低, 形成拟超固结现象的理论, 应用到土样不排水抗剪强度衰减与平均累积孔压之间关系的分析;同时与重塑土样的超固结静态剪切试验结果进行比较, 得到了土样在波浪荷载作用后的归一化不排水抗剪强度与拟超固结比之间的关系式。 建议以少量原状土样, 配合大量重塑土样的动三轴试验结果, 实现对实际海洋粘土地基在波浪荷载作用后的静不排水抗剪强度衰化规律的评估。 相似文献
5.
6.
Effects of pore water pressure dissipation on rate dependency of shear strength in localised failure of soils 
下载免费PDF全文
下载免费PDF全文 The paper presents analytical solutions for the evolution of excess pore pressures in the vicinity of a shear band in a rate‐dependent, strain‐softening permeable soil, with the aim to explore, both qualitatively and quantitatively, the potential variation of failure shear stress in the shear band. The solutions encompass both dissipation of a pre‐existing pore pressure regime within the main soil domain, and the effects of generation of additional pore pressure within the shear band itself. The simplified analytical solutions were checked by numerical inversion of exact solutions in Laplace transform space, confirming their high accuracy. The solutions show that it is possible for the failure shear stress to rise initially because of short‐term dissipation of the pre‐existing excess pore pressure at a faster rate than generation of new excess pore pressure within the shear band. This apparent strain hardening in a strain‐softening soil can be misleading in that it can temporarily slow down the sliding mass and create a false sense of stabilization of the slope. It can also result in additional temporary shear resistance for sliding foundations or pipelines on the seabed. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
7.
为研究应变速率对原状膨胀土力学性状的影响,通过GDS三轴试验系统进行了不同速率和围压下的固结不排水三轴剪切试验,分析了应力−应变曲线、孔隙水压力、剪切强度以及破坏模式随应变速率的变化规律。结果表明：不同应变速率下,膨胀土应力−应变曲线均呈应变硬化型。随着应变速率的增加,不排水剪切强度单调递增,引入应变速率参数ρ0.9后发现,不排水强度增长率为14.3%～23.2%,平均值为18.4%。低围压下,应变速率对孔隙水压力影响较小,随着围压的增大,孔隙水压力的发展趋势由软化型转变为硬化型,孔隙水压力峰值随应变速率的增大而减小。原状膨胀土应变速率效应与其多裂隙性密切相关,破坏形式表现为小应变速率下主剪切带与次剪切带共存,大应变速率下仅有主剪切带,裂隙或多剪切带的出现强化了膨胀土强度的应变速率效应。 相似文献
8.
Vikas Thakur Steinar Nordal Gustav Grimstad 《Geotechnical and Geological Engineering》2006,24(6):1729-1747
A negative second order work, strain softening, is often noticed in contractant material like sensitive clays. Failure in
such clays will lead to the formation of localized deformation zone of intense inelastic strain, known as shear band. Conditions,
emergence and inclination of shear band has been very well demonstrated in past decades in different manners, however a definite
thickness of shear band is still an open question due to several reasons. Mesh dependency, loss of ellipticity is another
challenge associated with finite element analyses for strain softening clays. This paper covers a comprehensive review of
classical theories of strain localization and associated limitation. Mesh dependency, ill-possed boundary value problem is
addressed using finite element simulation examples and experimental results. 相似文献
9.
Undrained deformation of dilative sand generates negative excess pore pressure. It enhances the strength, which is called dilative hardening. This increased suction is not permanent. The heterogeneity at the grain scale triggers localisations causing local volume changes. The negative hydraulic gradient drives fluid into dilating shear zones. It loosens the soil and diminishes the shear strength. It is essential to understand the mechanism behind this internal drainage and to capture it numerically. The purpose of this paper is to develop a macroscopic constitutive relationship for the undrained deformation of saturated dense sand in the presence of a locally fully or partially drained shear band. Separate constitutive relations are generated for the band and intact material. Both time and scale dependence during pore fluid diffusion in saturated sand are captured, eliminating the mesh dependency for finite element implementations. The model is applied to the Gauss points that satisfy the bifurcation criterion. The proposed method is calibrated to recreate the undrained macroscopic response bestowed by an extra-small mesh. The microscopic behaviours inside and outside shear band predicted by this model are qualitatively in good agreement with individual material point behaviours inside and outside the shear band in the extra-small mesh. Depending on the loading rate and the shear band thickness, the response inside the band can be fully or partially drained, which governs the ultimate global strength. The calibrated model is exploited to simulate an upscaled biaxial compression test with semipermeable boundaries. 相似文献
10.
11.
In this article we present closed‐form solutions for the undrained variations in stress, pore pressure, deformation and displacement inside hollow cylinders and hollow spheres subjected to uniform mechanical pressure instantaneously applied to their external and internal boundary surfaces. The material is assumed to be a saturated porous medium obeying a Mohr–Coulomb model failure criterion, exhibiting dilatant plastic deformation according to a non‐associated flow rule which accounts for isotropically strain hardening or softening. The instantaneous response of a porous medium submitted to an instantaneous loading is undrained, i.e. without any fluid mass exchange. The short‐term equilibrium problem to be solved is now formally identical to a problem of elastoplasticity where the constitutive equations involve the undrained elastic moduli and particular equivalent plastic parameters. The response of the model is presented (i) for extension and compression undrained triaxial tests, and (ii) for unloading problems of hollow cylinders and spheres through the use of appropriately developed closed‐form solutions. Numerical results are presented for a plastic clay stone with strain hardening and an argilite with strain softening. The effects of plastic dilation, of the strain softening law and also of geometry of the cavity on the behaviour of the porous medium have been underlined. Analytical solutions provide valuable benchmarks enabling various numerical methods in undrained conditions with a finite boundary to be verified. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
12.
简要介绍了颗粒抗转动模型,并将其引入离散元程序中,通过建立挡墙地基模型和合理选取模型参数,分别考虑了地基填土不同密实度和挡墙不同位移模式（被动T模式、RB模式、RT模式）情况下,刚性挡墙被动土压力随挡墙位移增长发展到达临界状态时,土压力系数 随位移发展的变化规律及墙后填土剪切带的形成规律,并与其他学者的研究成果进行对比分析。研究结果表明,土压力系数 随着挡墙位移增长的变化规律与填土的孔隙比（或相对密实度）和挡墙的位移模式紧密相关。随着孔隙比的减小或相对密实度的增大,土压力系数 会逐渐由位移硬化特性过渡为位移软化特性。尽管中密试样在双轴压缩试验中呈现出应变软化特性,而中密样的土压力系数 随着挡墙平动位移的增长可能呈现出位移软化特性,也可能呈现位移硬化特性。随着刚性挡墙向墙后土体推移,试样中的剪应变随之增大,并会在墙后形成应变局部化,即剪切带的出现。与室内试验剪应变云图相似,离散元较好地模拟了土压力临界状态时剪切带分布规律。同时,墙后土体表面不再是光滑的平面,而是逐渐隆起的凹凸面;随着挡墙位移增长,土体表面隆起量越来越大,直至土体破坏。 相似文献
13.
通过等压固结静、动三轴试验,研究了渤海湾粉质黏土在循环荷载作用下的动力性质和循环荷载后不排水静力性质。试验结果表明,循环应力幅值比越大,平均轴向应变和轴向应变幅值越大;循环应力幅值比达到0.4时,平均轴向应变和轴向应变幅值随着循环周数增加迅速增大;循环应力幅值比相同,固结应力越大,轴向应变幅值越大,而平均轴向应变越小。在较大的循环应力幅值比下,平均孔压比值和孔压幅值比值随着循环周数的增大会达到稳定;循环应力幅值比越大平均孔压比值和孔压幅值比值均越大;相同循环应力幅值,固结应力越大平均孔压比值越小,而固结应力对孔压幅值比值影响较小。循环荷载的作用会导致循环荷载后不排水剪在q-p’平面上有效应力路径和孔压发展表现出超固结土的性质。 相似文献
14.
In dynamic geotechnical problems, soils are often subjected to a combination of sustained static and fast cyclic loading. Under such loading conditions, saturated and normally consolidated clays generally experience a build-up of excess pore water pressure along with a degradation of stiffness and strength. If the strength of the soil falls below the static stress demand, a self-driven failure is triggered. In this paper, a constitutive model is presented for the analysis of such problems, based on a general multisurface plasticity framework. The hardening behavior, the initial arrangement of the surfaces, and the nonassociated volumetric flow rule are defined to capture important aspects of cyclic clay behavior. This includes nonlinear hysteretic stress-strain behavior, the effect of anisotropic consolidation, and the generation of excess pore water pressure during undrained cyclic loading along with a degradation of stiffness and strength. The model requires nine independent parameters, which can be derived from standard laboratory tests. A customized experimental program has been performed to validate the model performance. The model predictions show a good agreement with test results from monotonic and cyclic undrained triaxial tests, in particular with respect to the strain-softening response and the number of loading cycles to failure. A procedure for a general stress-space implicit numerical implementation for undrained, total stress-based finite element analyses is presented, including the derivation of the consistent tangent operator. Finally, a simulation of the seismic response of a submarine slope is shown to illustrate a possible application of the presented model. 相似文献
15.
以云南红土为研究对象,考虑干湿循环次数、干湿循环幅度等影响因素,利用TSZ-2型全自动三轴仪,开展干湿循环下饱和红土的不排水三轴试验,研究干湿循环作用对饱和红土剪切特性的影响。试验结果表明:不固结不排水条件下,随干湿循环次数增加和干湿循环幅度增大,饱和红土的应变软化现象增强,应力-应变曲线的初始斜率、孔压峰值增大,剪切峰值、峰值轴向应变、黏聚力、内摩擦角减小;干湿循环次数的影响大于干湿循环幅度的影响。干湿循环下饱和红土剪切特性变化的实质在于红土与水之间的相互作用,包括脱湿过程中水的逃逸作用、红土颗粒的吸附作用、红土体的硬化作用及收缩作用和吸湿过程中水的楔入作用、润滑作用、软化作用及红土体的膨胀作用,干湿循环过程中上述作用不断加深加剧,严重损伤了红土体的微结构,最终改变了饱和红土的不排水剪切特性。 相似文献
16.
Numerical modeling of combined effects of upward and downward propagation of shear bands on stability of slopes with sensitive clay 下载免费PDF全文
下载免费PDF全文 Modeling of progressive development of zones of large inelastic shear deformation (shear band) that results from strain‐softening behavior of sensitive clays could explain the failure mechanisms of large landslides. Because of toe erosion, a shear band can be initiated and propagated upward (inward) from the river bank. On the other hand, upslope surcharge loading could generate shear bands that might propagate down towards the river bank. In the present study, upward and downward propagation of shear bands and failure of sensitive clay slopes are modeled using the Coupled Eulerian Lagrangian approach in Abaqus finite element (FE) software. It is shown that the formation and propagation of shear bands are significantly influenced by kinematic constraints that change with displacements of the soil masses, and therefore the propagation of an existing shear band might be stopped and new shear bands could be formed. The main advantages of the present FE modeling are: (i) extremely large strains in the shear bands can be successfully simulated without numerical issues, (ii) a priori definition of shearing zones is not required to tackle severe strains; instead, the FE program automatically identifies the critical locations for shear band formation and propagation. Toe erosion could significantly increase the slope failure potential because of upslope surcharge loading. FE analyses with a thick and thin sensitive clay layers show that the global failure could occur at lower surcharge loads in the former as compared to the latter cases. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
17.
Effect of consolidation on strain localization of soft clays 总被引：4，自引：0，他引：4
A finite element formulation developed by Belytschko and his coworkers [1] is used to examine localized deformation as it exists for laboratory specimens of compressible Chicago clays. The element is based on an assumed strain formulation wherein localized and non-localized zones are embedded into an element when material based bifurcation is detected. A plane strain compression test of a natural clay specimen in which deformations localized into a single shear band during undrained shear is simulated using this element. Localization is initiated by imposing a non-uniform applied displacement consistent with that measured experimentally. Results indicate that to insure localization to a single band, considerations must be made for non-uniformities developed during the consolidation phase. 相似文献
18.
超固结黏土单调和耦合循环的剪切特性研究 总被引：1，自引：0，他引：1
针对超固结黏土空心试样,利用土工静力-动力液压三轴-扭转多功能剪切仪,在均等固结条件下进行了单调扭剪和三轴-扭转耦合循环剪切试验。试验结果表明：不同超固结比黏土的单调扭剪强度也可由正常固结黏土的单调扭剪强度得到,得到了不同超固结比下饱和黏土的强度及模量的退化规律;随着超固结比的增大,相同破坏循环次数的动应力比和临界循环应力比均线性增大;超固结比对耦合循环剪切的孔隙水压力的发展模式影响显著。参考Yasuhara的测量方法,采用荷载停止后继续采集孔压的方法可以更好地反映黏土在耦合循环荷载下产生的真实孔压和孔压的增长情况。提出的综合应变式同时考虑了剪切变化和正向偏差变形的共同效应,适合作为主应力连续旋转的耦合循环剪切试验的破坏标准。 相似文献
19.
利用GDS应力路径三轴试验系统对南阳膨胀土进行3种应力速率下、4种超固结比（OCR）的被动压缩三轴试验及3种超固结比的被动挤伸三轴试验,分析了不同超固结比和应力速率下其应力（孔隙水压力）-应变关系、有效应力路径及变形模量的演化规律,对膨胀土变形模量各向异性特性进行了初步探讨。结果表明,应力速率、超固结比及卸荷路径均对膨胀土力学特性有一定影响。在被动压缩路径和被动挤伸路径下,随着应力速率和超固结比的增加,相同轴向应变时的偏应力值单调增加;不同超固结比和应力速率时膨胀土的孔隙水压力始终为负值,且其降幅总体上随超固结比的增加而增大,但其降幅随应力速率的变化规律与剪切路径有关。在被动压缩路径下,相同应变时不同应力速率下的孔压降幅基本相同;而在被动挤伸路径下,其降幅随应力速率的增加而增大。边坡开挖路径的选择对于边坡变形影响显著,被动挤伸路径下达到设定极限偏应力时的轴向应变明显大于被动压缩路径。膨胀土变形模量E100随着超固结比和应力速率的增加而增加,但各应力速率下变形模量的各向异性特性则随着超固结比的增加而变弱。 相似文献
20.
在三轴条件下,对饱和土（砂土和黏土）进行排水与不排水条件下的冲击试验及冲击后再固结试验,对比研究了不同渗透性土在不同排水条件下的冲击动力响应和冲击后再固结性状。结果表明：饱和黏土不排水冲击时的孔隙水压力随冲击击数增加而升高并逐渐稳定,排水冲击时的孔隙水压力则是先达到峰值然后有所下降;砂土不排水冲击时的冲击能量对孔隙水压力影响最明显;饱和砂土不排水冲击时的轴向应变与冲击击数呈近似线性关系,饱和黏土冲击及饱和砂土排水冲击则呈近二次曲线关系;饱和砂土不排水冲击后再固结阶段的孔隙水压力立即消散为0,同时体变迅速增大到一定值;饱和黏土在冲击后再固结阶段的孔隙水压力在一定时间内逐渐消散完毕,同时体变逐渐增大;饱和黏土排水冲击时,冲击阶段产生的体变占冲击引起总体变的39%～49%,冲击后再固结阶段产生的体变占51%～61%;砂土和黏土的总体变均表现为排水冲击明显大于不排水冲击,改善冲击时的排水条件有利于提高加固效果。 相似文献