共查询到20条相似文献，搜索用时 312 毫秒
1.
Multispectral LANDSAT images of the Precambrian shield of Rajasthan, India, indicate rejuvenation of Precambrian lineaments in later geological times. Lineaments in the southern part of the area seem related to the formation of the Cambay graben (Mesozoic) and the Narmada—Son megalineament (late Mesosoic). In addition, there are a few relatively young structural features traversing the Quaternary deposits in the northern part of the belt that could be manifestations of intraplate tectonics of the Himalayan orogeny. 相似文献
2.
It has been generally accepted that the main trend of late Tertiary and Quaternary tectonics on Java and Sumatra is parallel to the longest axis of the islands.A study of ERTS-1 images covering parts of central and eastern Java, reveals a set of NE—SW trending lineaments, which measure a few 10 km in length. The direction of these lineaments corresponds to the so-called Meratus tectonic trend.Without being directly recognizable as fault or fault-line features these lineaments are also observable on scale 1: 50,000 aerial photographs.Geomorphic features such as unpaired terraces, linear scars, morphological unconformities, different land-use patterns across the lineament, and coastline configurations, however, strongly suggest a fault-origin of these lineaments. 相似文献
3.
The Olinghouse fault zone is one of several NE—ENE-trending fault zones and lineaments, including the Midas Trench and the Carson—Carson Sink Lineament, which exhibit left-lateral transcurrent movement conjugate to the Walker Lane in western Nevada. The active portion of this fault zone extends for approximately 23 km, from 16 km east of Reno, Nevada, to the southern extent of Pyramid Lake. The fault can be traced for most of its length from its geomorphic expression in the hilly terrain, and it is hidden only where overlain by recent alluvial sediments. Numerous features characteristic of strike-slip faulting can be observed along the fault, including: scarps, vegetation lines, sidehill and shutter ridges, sag ponds, offset stream channels and stone stripes, enclosed rhombohedral and wedge-shaped depressions, and en-echelon fractures.A shear zone having a maximum observable width of 1.3 km is defined principally by Riedel shears and their symmetrical P-shears, with secondary definition by deformed conjugate Riedel shears. Several continuous horizontal shears, or principal displacement shears, occupy the axial portion of the shear zone. The existence of P-shears and principal displacement shears suggests evolution of movement along the fault zone analogous to the “Post-Peak” or “Pre-Residual Structure” stage.Historic activity (1869) has established the seismic potential of this zone. Maximum intensities and plots of the isoseismals indicate the 1869 Olinghouse earthquake had a magnitude of 6.7. Field study indicates the active length of the fault zone is at least 23 km and the maximum 1869 displacement was 3.65 m of left-slip. From maximum fault length and maximum fault displacement to earthquake magnitude relations, this corresponds to an earthquake of about magnitude 7. 相似文献
4.
In the Hazara arc region of northern Pakistan, some of the active basements structures buried below a thick, detached sedimentary layer are inferred from the distribution of lineaments and the drainage patterns, as viewed in Landsat satellite imagery and from river profiles.A prominent set of NW-trending lineaments seen on satellite imagery, coincides approximately with the southwest or updip side of the Indus—Kohistan seismic zone (IKSZ) —the most active basement structure of the region, even though this structure is buried beneath and decoupled from a 12 km thick sedimentary layer. The IKSZ has been interpreted as an extension of the Himalayan Basement Thrust, and is also associated with a prominent topographic “step”.Knickpoints on major rivers in the region lie on or north of the IKSZ. All Indus River tributaries, examined north of the IKSZ, show prominent knickpoints, while two tributaries draining south of the IKSZ have no knickpoints. These results suggest ongoing uplift above and north of the IKSZ, and are consistent with the tectonic model obtained from the seismic data.Another prominent lineament set is detected along the north—south section of the Indus River. This set is probably related to the Indus River horst—anticline and associated reentrant.One of the two highest lineament concentrations occurs at the intersection between the NW-trending IKSZ lineament and the N-trending Indus River lineament. The other is along the west bank of the Indus Valley, 25 km north of Tarbela Dam.A topographic ridge (Swabi—Nowshera ridge) appears to be forming along the west side of the Indus River, in the Peshawar Basin. The rising ridge is ponding the Kabul River upstream of Nowshera, where the drainage is braided. 相似文献
5.
Ravi P. Gupta 《Tectonophysics》1977,38(3-4)
Based on studies of images obtained from LANDSAT-1 and 2, several seemingly active movement zones have been delineated in a section of the eastern Alps and are being reported in the present paper for the first time. These zones, trending W—E to NW—SE, cut across all earlier Alpine boundaries and contacts and on either side along their length, are marked with drag effects, indicating their post-Alpine neotectonic nature. Their relation with the present-day central European stress field, as determined from fault-plane studies and in-situ stress measurements, has been sought. In conjunction with the evidence from neighbouring areas, a dextral shear tendency of the present-day Mediterranean is indicated. Further, a number of extensive lineaments have been observed in the Alpine section. Statistically, there are three major lineation sets trending N45°, N15°, N345°. They appear to have developed cogenetically as a result of shear and tensile failures due to a stress field with maximum principal stress oriented averagely at N15°. This direction of the maximum principal stress, deduced from the above lineation analysis of the eastern Alps, is in striking conformity with the one believed to have been in existence for the development of the Rhinegraben (N20°). It appears that the Rhinegraben and the Alpide belt have evolved cogenetically and concurrently under the same dominant stress field (P1 = N—NNE, P2 = vertical and P3 = E—ESE) and hence the two geotectonic features are really not antagonistic and mutually incompatible as usually believed on the grounds that one involves tension (taphrogenesis — Rhinegraben) and the other compression (orogenesis — Alpide belt) but are different manifestations of the same stress field. Besides, some additional light has been thrown on the possible controls of development of the Giudicaria Line and cause of predominance of NE—SW trending sinistral faults. 相似文献
6.
F.L. Sutherland 《Tectonophysics》1978,48(3-4)
Mesozoic—Cainozoic volcanism was concentrated on the youngest eastern Australian craton. Basaltic activity (with some felsic fractionation) has predominated over Mesozoic interludes of calcalkaline volcanism (rhyolites, dacites, trachytes andesites) and more isolated shoshonitic activity (now represented by appinitic, syenitic, granitic and lamprophyric complexes).Epeirogenic movements and associated sea-floor spreading and orogenic episodes at the continental margins, initiated and controlled much of the volcanism. Basin edges, faults, lineaments and their intersections were important in locating sites of volcanism; some fundamental structural lines have focussed volcanism over 300–600 km.The eastern Mesozoic basaltic volcanism shows a late Jurassic N-S trend from undersaturated to saturated compositions, with increasing intensity of melting towards a major Tasmanian-Antarctic thermo-tectonic event. A late Jurassic-late Cretaceous E-W trend may extend from possible ‘kimberlites’ through shoshonitic to calcalkaline activity with increasing proximity to orogenic movements along the New Zealand ‘Geosyncline’.Cainozoic basaltic volcanism reflects the NNE drift of Australia under Atlantic-Indian-Southern Ocean sea-floor spreading, with a debatable role for subduction along the Tasman Sea margin. The ultimate mechanisms of volcanism are not clearly understood. Drift of cratonic structural weaknesses over thermal anomalies in the mantle, with generation of magmas from a geochemically zoned Lower Velocity Zone under influence of uplifts, lithospheric thickness and periodic release of thermal energy, seems to partly explain observed patterns of E. Australian volcanism. 相似文献
7.
Recent studies in northern Switzerland have shown that epicontinental areas thought to have been tectonically stable during the Mesozoic were not necessarily as rigid as presumed. By comparing Oxfordian facies boundaries and depocenters in their palinspastic position with known faults in the basement, a direct relationship between the two can be demonstrated. Previously, the lack of obvious synsedimentary tectonic features has lulled scientists into believing that the realm of the Swiss Jura was tectonically stable during the Mesozoic. However, it can be shown that facies and sedimentary structures are largely influenced by tectonics. Subsurface data provide evidence for the presence of Paleozoic troughs in the basement which, apparently, were prone to reactivation during the Pan-European stress-field reorganization taking place in the Late Jurassic. This led to differential subsidence along pre-existing lineaments within the study area, which can be recognized in the distribution of Oxfordian epicontinental basins and their coeval shallow-water counterparts. Eustatic sea-level fluctuations played an important role in the development of shallow-water facies patterns, but a subordinate role in the control of accommodation space in basins.
While tectonic activity is often recorded in the sedimentary record in the form of platform break-ups and associated sedimentary debris, more subtle indicators may be overlooked or even misinterpreted. Sedimentary structures and isopach maps, as well as subsurface data in the study area suggest that subtle synsedimentary tectonic movements led to the formation of two shallow, diachronous epicontinental basins during the Late Jurassic. It becomes possible to recognize and differentiate the combined effects of local and regional tectonism, eustasy and sedimentation. 相似文献
8.
The structural elements on the shallow (Sunda Shelf) and deep seas of east and south—east Asia are interpreted as the result of past interaction between lithospheric plates. During the Mesozoic the western Pacific Ocean and the eastern Indian Ocean were parts of the Tethys Sea and were moving to the north relative to Antarctica. A Mesozoic ridge system trending east—west produced east—west trending magnetic anomalies throughout the entire area. The ridge system was bisected by large north—south transform faults which divided the eastern Indian Ocean—western Pacific Ocean into sub-plates traveling at different speeds. The Mesozoic evolution of the Sunda Shelf and the deep seas resulted from such horizontal differential movement in a north—south direction. During Late Cretaceous—Eocene the various segments of the spreading ridge gradually submerged beneath the deep sea trenches to the north, causing a gradual change in the direction of motion of the Pacific plate. The change in motion of the Pacific plate resulted in the separation between the Pacific and the eastern Indian Ocean plates, the formation of large northeast—southwest tectonic elements on the Sunda Shelf and elsewhere in south—east Asia, the formation of the western Philippine Basin and the rapid northward motion of Australia. The only remnant of the Mesozoic ridge system exists today at the western Philippine Basin. 相似文献
9.
The NW–SE-striking Northeast German Basin (NEGB) forms part of the Southern Permian Basin and contains up to 8 km of Permian to Cenozoic deposits. During its polyphase evolution, mobilization of the Zechstein salt layer resulted in a complex structural configuration with thin-skinned deformation in the basin and thick-skinned deformation at the basin margins. We investigated the role of salt as a decoupling horizon between its substratum and its cover during the Mesozoic deformation by integration of 3D structural modelling, backstripping and seismic interpretation. Our results suggest that periods of Mesozoic salt movement correlate temporally with changes of the regional stress field structures. Post-depositional salt mobilisation was weakest in the area of highest initial salt thickness and thickest overburden. This also indicates that regional tectonics is responsible for the initiation of salt movements rather than stratigraphic density inversion.Salt movement mainly took place in post-Muschelkalk times. The onset of salt diapirism with the formation of N–S-oriented rim synclines in Late Triassic was synchronous with the development of the NNE–SSW-striking Rheinsberg Trough due to regional E–W extension. In the Middle and Late Jurassic, uplift affected the northern part of the basin and may have induced south-directed gravity gliding in the salt layer. In the southern part, deposition continued in the Early Cretaceous. However, rotation of salt rim synclines axes to NW–SE as well as accelerated rim syncline subsidence near the NW–SE-striking Gardelegen Fault at the southern basin margin indicates a change from E–W extension to a tectonic regime favoring the activation of NW–SE-oriented structural elements. During the Late Cretaceous–Earliest Cenozoic, diapirism was associated with regional N–S compression and progressed further north and west. The Mesozoic interval was folded with the formation of WNW-trending salt-cored anticlines parallel to inversion structures and to differentially uplifted blocks. Late Cretaceous–Early Cenozoic compression caused partial inversion of older rim synclines and reverse reactivation of some Late Triassic to Jurassic normal faults in the salt cover. Subsequent uplift and erosion affected the pre-Cenozoic layers in the entire basin. In the Cenozoic, a last phase of salt tectonic deformation was associated with regional subsidence of the basin. Diapirism of the maturest pre-Cenozoic salt structures continued with some Cenozoic rim synclines overstepping older structures. The difference between the structural wavelength of the tighter folded Mesozoic interval and the wider Cenozoic structures indicates different tectonic regimes in Late Cretaceous and Cenozoic.We suggest that horizontal strain propagation in the brittle salt cover was accommodated by viscous flow in the decoupling salt layer and thus salt motion passively balanced Late Triassic extension as well as parts of Late Cretaceous–Early Tertiary compression. 相似文献
10.
The east margin of the Siberian craton is a typical passive margin with a thick succession of sedimentary rocks ranging in age from Mesoproterozoic to Tertiary. Several zones with distinct structural styles are recognized and reflect an eastward-migrating depocenter. Mesozoic orogeny was preceded by several Mesoproterozoic to Paleozoic tectonic events. In the South Verkhoyansk, the most intense pre-Mesozoic event, 1000–950 Ma rifting, affected the margin of the Siberian craton and formed half-graben basins, bounded by listric normal faults. Neoproterozoic compressional structures occurred locally, whereas extensional structures, related to latest Neoproterozoic–early Paleozoic rifting events, have yet to be identified. Devonian rifting is recognized throughout the eastern margin of the Siberian craton and is represented by numerous normal faults and local half-graben basins.Estimated shortening associated with Mesozoic compression shows that the inner parts of ancient rifts are now hidden beneath late Paleozoic–Mesozoic siliciclastics of the Verkhoyansk Complex and that only the outer parts are exposed in frontal ranges of the Verkhoyansk thrust-and-fold belt. Mesoproterozoic to Paleozoic structures had various impacts on the Mesozoic compressional structures. Rifting at 1000–950 Ma formed extensional detachment and normal faults that were reactivated as thrusts characteristic of the Verkhoyansk foreland. Younger Neoproterozoic compressional structures do not display any evidence for Mesozoic reactivation. Several initially east-dipping Late Devonian normal faults were passively rotated during Mesozoic orogenesis and are now recognized as west-dipping thrusts, but without significant reactivation displacement along fault surfaces. 相似文献
11.
Yujiro Ogawa 《Tectonophysics》1978,47(3-4)
Consideration of the paleogeography and large and small structures in the outer part (the Sakawa Fold Belt) of the Paleozoic—Mesozoic geosyncline of Japan suggests that the main part of the Japanese Islands has grown up not from an arc—trench system but from a marginal sea basin—microcontinent system: the Chichibu Geosyncline and the Kurosegawa — Ofunato Island Arc, Minor structures are superposed in a complicated way and they are analyzed in terms of the concepts of tectonic level and multiple deformation.Stratigraphic evidence shows that an early deformation was pre-middle Triassic in the Chichibu Terrain but northwards in the Sambagawa terrain it may have continued until early Cretaceous in relation to minor scale subduction within the marginal basin. A late Cretaceous phase of deformation produced the greatest crustal shortening in the microcontinent area of the Kurosegawa Tectonic Zone and was nearly contemporaneous with the intrusion of granitic rocks in the Ryoke Zone Younger secondary eugeosynclines were developed by progressive encroachment on the arc—trench gap south of the Kurosegawa zone from late Permian times onwards. 相似文献
12.
An integrated approach to resolve the kinematics of the controversial Achankovil Shear Zone (AKSZ) has been attempted involving remote sensing data, shaded relief topo-maps, ground details of lithology and mesoscopic structures. An excellent correlation of structural trends exists on all scales of observation. The AKSZ is distinctly defined by NW–SE trending foliation fabrics with steep dips to southwest. The adjacent Madurai block and Trivandrum block show contrasting lithological and structural characteristics as shown in structural cross-sections.The mesoscopic structural studies reveal the presence of sub-horizontal stretching lineations, asymmetric structures like S–C′ fabrics, porphyroclasts, ‘S’ shaped folds and shear bands confirming the strike-slip component of shear along AKSZ. The deformation undergone by the AKSZ could be described in terms of an initial dextral deformation — D1, reactivated and superimposed by sinistral kinematics — D2, which is also supported by megascopic structural interpretation of remote sensing data. The megascopic structural interpretation of AKSZ displays en-echelon pattern of lineaments with right overstepping arrangement, which can be interpreted as an evidence of the latest sinistral transpressional deformation. 相似文献
13.
In the Upper Pennine nappe complex of the Simplon—Pennine Alps (Switzerland and Italy), at least three phases of major post-nappe folding (in places associated with thrusting) can be distinguished. These are superimposed on an earlier-formed, partly chaotic, complex of tectonic units, including the Bernhard and Monte Rosa continental flakes and the Zermatt—Saas and Antrona ophiolite complexes. The earliest post-nappe folds were essentially isoclinal throughout the whole region and were accompanied by a strong schistosity which is the main foliation in most areas. Later, two successive phases of back-folding led to the present overall structure. Both phases typically show rapid variations in style from open folds lacking axial planar schistosity to very tight structures with complete foliation transposition. This has been demonstrated by systematically mapping the major axial traces over the whole region. Successively removing the major structures in reverse order shows that the ophiolite complexes were originally part of a continuous unit marking an important suture between the Bernhard and Monte Rosa nappes. 相似文献
14.
This review of geological, seismological, geochronological and paleobotanical data is made to compare historic and geologic rates and styles of deformation of the Sierra Nevada and western Basin and Range Provinces. The main uplift of this region began about 17 m.y. ago, with slow uplift of the central Sierra Nevada summit region at rates estimated at about 0.012 mm/yr and of western Basin and Range Province at about 0.01 mm/yr. Many Mesozoic faults of the Foothills fault system were reactivated with normal slip in mid-Tertiary time and have continued to be active with slow slip rates. Sparse data indicate acceleration of rates of uplift and faulting during the Late Cenozoic. The Basin and Range faulting appears to have extended westward during this period with a reduction in width of the Sierra Nevada.The eastern boundary zone of the Sierra Nevada has an irregular en-echelon pattern of normal and right-oblique faults. The area between the Sierra Nevada and the Walker Lane is a complex zone of irregular patterns of hörst and graben blocks and conjugate normal-to right- and left-slip faults of NW and NE trend, respectively. The Walker Lane has at least five main strands near Walker Lake, with total right-slip separation estimated at 48 km. The NE-trending left-slip faults are much shorter than the Walker Lane fault zone and have maximum separations of no more than a few kilometers. Examples include the 1948 and 1966 fault zone northeast of Truckee, California, the Olinghouse fault (Part III) and possibly the almost 200-km-long Carson Lineament.Historic geologic evidence of faulting, seismologic evidence for focal mechanisms, geodetic measurements and strain measurements confirm continued regional uplift and tilting of the Sierra Nevada, with minor internal local faulting and deformation, smaller uplift of the western Basin and Range Province, conjugate focal mechanisms for faults of diverse orientations and types, and a NS to NE—SW compression axis (σ1) and an EW to NW—SE extension axis (σ3). 相似文献
15.
Georges Pascal 《Tectonophysics》1979,57(1):7-34
Earthquakes for the period 1964–1973 are relocated by the method of Joint Hypocenter Determination in order better to resolve the configuration and the structure of the New Guinea—New Britain—Solomon Islands region. Focal mechanism solutions are integrated with the seismicity and interpreted closely with it. A zone of subduction exists beneath New Britain and the Solomon Islands, a zone of left-lateral strike-slip movement extends from New Ireland to New Guinea. The zone of seismicity in northern New Guinea has developed as a result of a continent—island-arc collision in late Oligocene—Miocene times and does not exhibit a well-developed inclined seismic zone. It is proposed that plate tectonics theory does not apply rigorously, but slip-line field theory allows the presentation of a new geodynamic model for this region. 相似文献
16.
J. -L. Mansy G. M. Manby O. Averbuch M. Everaerts F. Bergerat B. Van Vliet-Lanoe J. Lamarche S. Vandycke 《Tectonophysics》2003,373(1-4):161
The geometry and dynamics of the Mesozoic basins of the Weald–Boulonnais area have been controlled by the distribution of preexisting Variscan structures. The emergent Variscan frontal thrust faults are predominantly E–W oriented in southern England while in northern France they have a largely NW–SE orientation.Extension related to Tethyan and Atlantic opening has reactivated these faults and generated new faults that, together, have conditioned the resultant Mesozoic basin geometries. Jurassic to Cretaceous N–S extension gave the Weald–Boulonnais basin an asymmetric geometry with the greatest subsidence located along its NW margin. Late Cretaceous–Palaeogene N–S oriented Alpine (s.l.) compression inverted the basin and produced an E–W symmetrical anticline associated with many subsidiary anticlines or monoclines and reverse faults. In the Boulonnais extensional and contractional faults that controlled sedimentation and inversion of the Mesozoic basin are examined in the light of new field and reprocessed gravity data to establish possible controls exerted by preexisting Variscan structures. 相似文献
17.
The NW—SE trending segments of the California coastline from Point Arena to Point Conception (500 km) and from Los Angeles to San Diego (200 km) generally parallel major right-lateral strike-slip fault systems. Minor vertical crustal movements associated with the dominant horizontal displacements along these fault systems are recorded in local sedimentary basins and slightly deformed marine terraces. Typical maximum uplift rates during Late Quaternary time are about 0.3 m/ka, based on U-series ages of corals and amino-acid age estimates of fossil mollusks from the lowest emergent terraces.In contrast, the E–W-trending segments of the California coastline between Point Conception and Los Angeles (200 km) parallel predominantly northward-dipping thrust and high-angle reverse faults of the western Transverse Ranges. Along this coast, marine terraces display significantly greater vertical deformation. Amino-acid age estimates of mollusks from elevated marine terraces along the Ventura—Santa Barbara coast imply anomalously high uplift rates of between 1 and 6 m/ka over the past 40 to 100 ka. The deduced rate of terrace uplift decreases from Ventura to Los Angeles, conforming with a similar trend observed by others in contemporary geodetic data.The more rapid rates of terrace uplift in the western Transverse Ranges reflect N—S crustal shortening that is probably a local accommodation of the dominant right-lateral shear strain along coastal California. 相似文献
18.
Crustal memory and basin evolution in the Central European Basin System—new insights from a 3D structural model 总被引：1，自引：2，他引：1
The Central European Basin System (CEBS) is composed of a series of subbasins, the largest of which are (1) the Norwegian–Danish Basin (2), the North German Basin extending westward into the southern North Sea and (3) the Polish Basin. A 3D structural model of the CEBS is presented, which integrates the thickness of the crust below the Permian and five layers representing the Permian–Cenozoic sediments. Structural interpretations derived from the 3D model and from backstripping are discussed with respect to published seismic data. The analysis of structural relationships across the CEBS suggests that basin evolution was controlled to a large degree by the presence of major zones of crustal weakness. The NW–SE-striking Tornquist Zone, the Ringkøbing-Fyn High (RFH) and the Elbe Fault System (EFS) provided the borders for the large Permo–Mesozoic basins, which developed along axes parallel to these fault systems. The Tornquist Zone, as the most prominent of these zones, limited the area affected by Permian–Cenozoic subsidence to the north. Movements along the Tornquist Zone, the margins of the Ringkøbing-Fyn High and the Elbe Fault System could have influenced basin initiation. Thermal destabilization of the crust between the major NW–SE-striking fault systems, however, was a second factor controlling the initiation and subsidence in the Permo–Mesozoic basins. In the Triassic, a change of the regional stress field caused the formation of large grabens (Central Graben, Horn Graben, Glückstadt Graben) perpendicular to the Tornquist Zone, the Ringkøbing-Fyn High and the Elbe Fault System. The resulting subsidence pattern can be explained by a superposition of declining thermal subsidence and regional extension. This led to a dissection of the Ringkøbing-Fyn High, resulting in offsets of the older NW–SE elements by the younger N–S elements. In the Late Cretaceous, the NW–SE elements were reactivated during compression, the direction of which was such that it did not favour inversion of N–S elements. A distinct change in subsidence controlling factors led to a shift of the main depocentre to the central North Sea in the Cenozoic. In this last phase, N–S-striking structures in the North Sea and NW–SE-striking structures in The Netherlands are reactivated as subsidence areas which are in line with the direction of present maximum compression. The Moho topography below the CEBS varies over a wide range. Below the N–S-trending Cenozoic depocentre in the North Sea, the crust is only 20 km thick compared to about 30 km below the largest part of the CEBS. The crust is up to 40 km thick below the Ringkøbing-Fyn High and up to 45 km along the Teisseyre–Tornquist Zone. Crustal thickness gradients are present across the Tornquist Zone and across the borders of the Ringkøbing-Fyn High but not across the Elbe Fault System. The N–S-striking structural elements are generally underlain by a thinner crust than the other parts of the CEBS.The main fault systems in the Permian to Cenozoic sediment fill of the CEBS are located above zones in the deeper crust across which a change in geophysical properties as P-wave velocities or gravimetric response is observed. This indicates that these structures served as templates in the crustal memory and that the prerift configuration of the continental crust is a major controlling factor for the subsequent basin evolution. 相似文献
19.
The timing of motion on major thrusts in the Western Himalaya shows an extremely complex sequence that spans approximately 70 Ma from the latest Cretaceous throughout the Tertiary. Three major phases of thrusting can be distinguished. The earliest phase (T1) is associated with emplacement of Tethyan basin thrust sheets (Lamayuru sediments and Spontang ophiolite) south and south-westwards onto the submerged northern passive margin of India (75-60 Ma). Collision between India and Asia occurred at 50-36 Ma and was followed immediately by the major phase (T2) of crustal shortening involving large-scale south and south-westward directed thrusting of the complete Palaeozoic, Mesozoic and Late Tertiary Tibetan—Tethys zone rocks. Preliminary balanced cross-sections show a minimum shortening of 126 km of these rocks across the Zanskar Range. The late collision phase (T3) involved re-thrusting of the previously stacked pile (breaching or leap-frog thrusting) reversing the earlier stacking order in places, and widespread steepening, overturning and backthrusting along the whole northern margin of the Tibetan—Tethys zone and throughout the Indus suture zone. 相似文献
20.
Although major crustal lineaments may play an important role in mineralisation, the relationship between lineaments and mineral deposits can be quite cryptic, and structural controls may vary as a function of scale along lineaments. Major lineaments alone may be of limited use for detailed target generation. The Cloncurry Lineament in the Eastern part of the Mount Isa Inlier is a crustal scale structure defined by potential field-derived ‘worms’. Weights-of-evidence quantifies the association between mineral occurrences and this lineament. Autocorrelation is used to recognise structural controls on mineralisation at different scales, by progressively limiting the lengths of the vectors between mineral occurrence points in the autocorrelation plot. The weights-of-evidence analysis shows that Au, Au–Cu, Cu–Au and Cu deposits have a positive spatial correlation to the Cloncurry Lineament, which suggests it that acted as a primary crustal scale control on the localisation of Cu and Au through focussing mineralisation systems on a broad scale. However, autocorrelation defines a variety of local structural controls, which can be interpreted as shear zones, variably oriented fault sets, en echelon fault arrays, and potentially the orientation of bedding and/or iron formations which localise fluid flow and mineral deposition at finer scales. The results suggest that major lineaments defined by geophysical contrasts can be used in conjunction with techniques of spatial analysis for targeting structurally controlled mineralisation in areas under thin cover adjacent to mineralised terrains such as the Mt Isa Inlier. 相似文献